appendage

(number of XSPNs, batch size, iterations)

.gitignore

@@ -151,3 +151,6 @@ compile_commands.json
 CTestTestfile.cmake
 *.dump
 
+.vscode/c_cpp_properties.json
+semihosting_test/build/semihosting_test
+semihosting_test/build/Makefile

.gitmodules

@@ -0,0 +1,6 @@
+[submodule "benchmarks/coremark/cm"]
+	path = benchmarks/coremark/cm
+	url = https://github.com/eembc/coremark.git
+[submodule "bare-metal-bsp"]
+	path = bare-metal-bsp
+	url = https://git.minres.com/Firmware/MNRS-BM-BSP.git

CMakeLists.txt

@@ -0,0 +1,11 @@
+if (NOT DEFINED BOARD)
+	set(BOARD iss)
+endif()
+if (NOT DEFINED ISA)
+	set(ISA imc)
+endif()
+message(STATUS "Building firmware using ${BOARD} board configuration and isa ${ISA}")
+add_custom_target(fw-common ALL 
+	COMMAND make -C hello-world BOARD=${BOARD} ISA=${ISA} && make -C benchmarks/dhrystone BOARD=${BOARD} ISA=${ISA} && make -C benchmarks/coremark BOARD=${BOARD} ISA=${ISA}
+    USES_TERMINAL
+    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})

Jenkinsfile

@@ -0,0 +1,81 @@
+void checkout_project() {
+    checkout([
+        $class: 'GitSCM',
+        branches: [
+            [name: '*/main']
+        ],
+        extensions: [
+            [$class: 'CleanBeforeCheckout'],
+            [$class: 'SubmoduleOption', disableSubmodules: false, parentCredentials: true, recursiveSubmodules: true, reference: '', trackingSubmodules: false]
+        ],
+        submoduleCfg: [],
+        userRemoteConfigs: [
+            [credentialsId: 'gitea-jenkins', url: 'https://git.minres.com/Firmware/Firmwares.git']
+        ]
+    ])
+}
+
+void checkout_develop() {
+    dir("bare-metal-bsp") {
+        withCredentials([usernamePassword(credentialsId: 'gitea-jenkins', usernameVariable: 'GIT_USERNAME', passwordVariable: 'GIT_PASSWORD')]) {
+            sh ("git pull origin develop")
+        }
+    }
+    //sh("cd bare-metal-bsp && git checkout develop")
+}
+
+void make_hello(board) {
+    sh("make -C hello-world/ BOARD=${board}")
+    sh("make -C hello-world/ clean")
+}
+
+pipeline {
+    agent { docker { 
+        image 'ubuntu-riscv'
+        args '-v $HOME/.m2:/root/.m2'
+    }}
+    options {
+        // using the Timestamper plugin we can add timestamps to the console log
+        timestamps()
+        skipStagesAfterUnstable()
+    }
+    stages {
+        /*stage('checkout repo') { steps{ checkout_project()}}
+        stage('checkout develop') { steps{ checkout_develop()}}
+        stage('make iss') {steps { make_hello("iss")}}
+        stage('make hifive1') {steps { make_hello("hifive1")}}
+        stage('make TGC5L') {steps { make_hello("TGC5L")}}
+        stage('make rtl') {steps { make_hello("rtl")}}
+        stage('make ehrenberg') {steps { make_hello("ehrenberg")}}
+        stage('make tgc_vp') {steps { make_hello("tgc_vp")}}*/
+        stage('make hello-world') {
+            matrix {
+                axes {
+                    axis{
+                        name 'BOARD'
+                        values 'iss', 'hifive1', 'TGCP', 'ehrenberg', 'rtl', 'tgc_vp'
+                    }
+                }
+                stages {
+                    stage('Force sequential') {
+                        options {
+                            lock("One Board at a time")
+                        }
+                        stages {
+                            stage("make") {
+                                steps {
+                                    make_hello("${BOARD}")
+                                }
+                            }
+                        }
+                    }
+                }
+            } 
+        }
+    }
+    post {
+        failure {
+            sh("make -C hello-world/ clean")       
+        }
+    }
+}

README.md

@@ -1,2 +1,25 @@
-# Firmware
+# MINRES Firmware Repository
+## Structure
+This repository comes with several executables ready to be built, such as `hello-world` or `coremark` and `dhrystone` in the `benchmark` directory.
+Creating the executables in the easiest way possible is done by calling `make`in the corresponding directory.
 
+## Prerequisite
+This repository requires `riscv64-unknown-elf-gcc` to be located in `$PATH`.
+
+## How to Use
+When compiling executables, the target platform needs to be specified using the 'BOARD' variable. When compiling for the TGC5C for example, use  `make BOARD=tgc_vp`, when compiling for RTL `make BOARD=rtl`. The default value for the Board variable is 'iss'.
+The arch can be set with the 'ISA' variable, the default value is 'imc'.
+
+When compiling for the TGC5A VP for example, the call to create the correct binary is the following:
+```
+make BOARD=tgc_vp ISA=e
+```
+## Useful information
+Using `bear -- <build-command>` will cause a compile_commands.json to be emitted. This allows using completion tools like clangd. 
+
+## Current Limitations
+Currently, this repository only supports creation of 32-bit executables (Even when setting the `RISCV_ARCH` and `RISCV_ABI` manually).
+
+Compiling for the 'e' extension / ISA together with any other extension (`ISA=emc` for example), requires setting the `RISCV_ABI=ilp32e` explicitly. 
+
+When switching ABI or ARCH ensure that object files in the corresponding 'env' dir in the 'bare-metal-bsp' submodule are removed, so they get created with the appropriate flags (namely the 'init.o' file).

bare-metal-bsp

@@ -0,0 +1 @@
+Subproject commit 87dc0ec2304adcb94a25b397a357aadae1304867

benchmarks/coremark/.gitignore

@@ -0,0 +1,4 @@
+*.o
+*.elf
+*.log
+/coremark.*

benchmarks/coremark/Makefile

@@ -0,0 +1,33 @@
+TARGET := coremark
+ISA?=imc
+ITERATIONS?=600 # 300 for TGC
+
+ASM_SRCS := 
+C_SRCS := core_list_join.c core_main.c core_matrix.c core_state.c core_util.c core_portme.c ee_printf.c
+HEADERS := cm/coremark.h
+
+vpath %.c cm
+
+BOARD?=iss
+LINK_TARGET=link
+
+RISCV_ARCH:=rv32$(ISA)
+ifeq ($(ISA),e)
+    RISCV_ABI:=ilp32e
+else
+    RISCV_ABI:=ilp32
+endif
+
+PORT_CFLAGS = -DPERFORMANCE_RUN=1 -DCLOCKS_PER_SEC=10000000 -Wno-pointer-to-int-cast -Wno-int-to-pointer-cast
+PORT_CFLAGS+= -g -O3 -fno-common -funroll-loops -finline-functions -falign-functions=16 -falign-jumps=4 -falign-loops=4 -finline-limit=1000 -fno-if-conversion2 -fselective-scheduling -fno-crossjumping -freorder-blocks-and-partition
+
+FLAGS_STR = "$(PORT_CFLAGS) $(XCFLAGS) $(XLFLAGS) $(LFLAGS_END)"
+
+CFLAGS = $(PORT_CFLAGS) -I. -Icm -DFLAGS_STR=\"$(FLAGS_STR)\"
+CFLAGS += -DITERATIONS=$(ITERATIONS)
+LDFLAGS := -g -Wl,--wrap=scanf -Wl,--wrap=printf -Wl,--wrap=exit -lgcc -lm
+
+TOOL_DIR=$(dir $(compiler))
+
+BSP_BASE = ../../bare-metal-bsp
+include $(BSP_BASE)/env/common-gcc.mk

benchmarks/coremark/cm

@@ -0,0 +1 @@
+Subproject commit d5fad6bd094899101a4e5fd53af7298160ced6ab

benchmarks/coremark/core_portme.c

@@ -0,0 +1,198 @@
+/*
+Copyright 2018 Embedded Microprocessor Benchmark Consortium (EEMBC)
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
+Original Author: Shay Gal-on
+*/
+#include "coremark.h"
+#include "core_portme.h"
+//Read cycle CSR
+unsigned long long _read_cycle()
+{
+    unsigned long long result;
+    unsigned long lower;
+    unsigned long upper1;
+    unsigned long upper2;
+
+    asm volatile (
+        "repeat_cycle_%=: csrr %0, cycleh;\n"
+        "        csrr %1, cycle;\n"
+        "        csrr %2, cycleh;\n"
+        "        bne %0, %2, repeat_cycle_%=;\n"
+        : "=r" (upper1),"=r" (lower),"=r" (upper2)    // Outputs   : temp variable for load result
+        :
+        :
+    );
+    *(unsigned long *)(&result) = lower;
+    *((unsigned long *)(&result)+1) = upper1;
+
+    return result;
+}
+
+volatile int tohost;
+volatile int fromhost;
+
+void exit(int n){
+      tohost = 0x1;
+      for (;;);
+}
+
+void __libc_init_array (void) {
+/*
+    size_t count;
+    size_t i;
+    count = __preinit_array_end - __preinit_array_start;
+    for (i = 0; i < count; i++)
+        __preinit_array_start[i] ();
+
+#ifdef HAVE_INIT_FINI
+    _init ();
+#endif
+
+    count = __init_array_end - __init_array_start;
+    for (i = 0; i < count; i++)
+    __init_array_start[i] ();
+*/
+}
+#if VALIDATION_RUN
+volatile ee_s32 seed1_volatile = 0x3415;
+volatile ee_s32 seed2_volatile = 0x3415;
+volatile ee_s32 seed3_volatile = 0x66;
+#endif
+#if PERFORMANCE_RUN
+volatile ee_s32 seed1_volatile = 0x0;
+volatile ee_s32 seed2_volatile = 0x0;
+volatile ee_s32 seed3_volatile = 0x66;
+#endif
+#if PROFILE_RUN
+volatile ee_s32 seed1_volatile = 0x8;
+volatile ee_s32 seed2_volatile = 0x8;
+volatile ee_s32 seed3_volatile = 0x8;
+#endif
+volatile ee_s32 seed4_volatile = ITERATIONS;
+volatile ee_s32 seed5_volatile = 0;
+/* Porting : Timing functions
+        How to capture time and convert to seconds must be ported to whatever is
+   supported by the platform. e.g. Read value from on board RTC, read value from
+   cpu clock cycles performance counter etc. Sample implementation for standard
+   time.h and windows.h definitions included.
+*/
+CORETIMETYPE
+barebones_clock()
+{
+    return (CORETIMETYPE)_read_cycle();
+}
+/* Define : TIMER_RES_DIVIDER
+        Divider to trade off timer resolution and total time that can be
+   measured.
+
+        Use lower values to increase resolution, but make sure that overflow
+   does not occur. If there are issues with the return value overflowing,
+   increase this value.
+        */
+#define GETMYTIME(_t)              (*_t = barebones_clock())
+#define MYTIMEDIFF(fin, ini)       ((fin) - (ini))
+#define TIMER_RES_DIVIDER          1
+#define SAMPLE_TIME_IMPLEMENTATION 1
+#define EE_TICKS_PER_SEC           (CLOCKS_PER_SEC / TIMER_RES_DIVIDER)
+
+/** Define Host specific (POSIX), or target specific global time variables. */
+static CORETIMETYPE start_time_val, stop_time_val;
+
+/* Function : start_time
+        This function will be called right before starting the timed portion of
+   the benchmark.
+
+        Implementation may be capturing a system timer (as implemented in the
+   example code) or zeroing some system parameters - e.g. setting the cpu clocks
+   cycles to 0.
+*/
+void
+start_time(void)
+{
+    GETMYTIME(&start_time_val);
+}
+/* Function : stop_time
+        This function will be called right after ending the timed portion of the
+   benchmark.
+
+        Implementation may be capturing a system timer (as implemented in the
+   example code) or other system parameters - e.g. reading the current value of
+   cpu cycles counter.
+*/
+void
+stop_time(void)
+{
+    GETMYTIME(&stop_time_val);
+}
+/* Function : get_time
+        Return an abstract "ticks" number that signifies time on the system.
+
+        Actual value returned may be cpu cycles, milliseconds or any other
+   value, as long as it can be converted to seconds by <time_in_secs>. This
+   methodology is taken to accomodate any hardware or simulated platform. The
+   sample implementation returns millisecs by default, and the resolution is
+   controlled by <TIMER_RES_DIVIDER>
+*/
+CORE_TICKS
+get_time(void)
+{
+    CORE_TICKS elapsed
+        = (CORE_TICKS)(MYTIMEDIFF(stop_time_val, start_time_val));
+    return elapsed;
+}
+/* Function : time_in_secs
+        Convert the value returned by get_time to seconds.
+
+        The <secs_ret> type is used to accomodate systems with no support for
+   floating point. Default implementation implemented by the EE_TICKS_PER_SEC
+   macro above.
+*/
+secs_ret
+time_in_secs(CORE_TICKS ticks)
+{
+    secs_ret retval = ((secs_ret)ticks) / (secs_ret)EE_TICKS_PER_SEC;
+    return retval;
+}
+
+ee_u32 default_num_contexts = 1;
+
+/* Function : portable_init
+        Target specific initialization code
+        Test for some common mistakes.
+*/
+void
+portable_init(core_portable *p, int *argc, char *argv[])
+{
+    if (sizeof(ee_ptr_int) != sizeof(ee_u8 *))
+    {
+        ee_printf(
+            "ERROR! Please define ee_ptr_int to a type that holds a "
+            "pointer!\n");
+    }
+    if (sizeof(ee_u32) != 4)
+    {
+        ee_printf("ERROR! Please define ee_u32 to a 32b unsigned type!\n");
+    }
+    p->portable_id = 1;
+    ee_printf("portable_init finished.\n");
+}
+/* Function : portable_fini
+        Target specific final code
+*/
+void
+portable_fini(core_portable *p)
+{
+    p->portable_id = 0;
+}

benchmarks/coremark/core_portme.h

@@ -0,0 +1,210 @@
+/*
+Copyright 2018 Embedded Microprocessor Benchmark Consortium (EEMBC)
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+
+Original Author: Shay Gal-on
+*/
+/* Topic : Description
+        This file contains configuration constants required to execute on
+   different platforms
+*/
+#ifndef CORE_PORTME_H
+#define CORE_PORTME_H
+/************************/
+/* Data types and settings */
+/************************/
+/* Configuration : HAS_FLOAT
+        Define to 1 if the platform supports floating point.
+*/
+#ifndef HAS_FLOAT
+#define HAS_FLOAT 0
+#endif
+/* Configuration : HAS_TIME_H
+        Define to 1 if platform has the time.h header file,
+        and implementation of functions thereof.
+*/
+#ifndef HAS_TIME_H
+#define HAS_TIME_H 0
+#endif
+/* Configuration : USE_CLOCK
+        Define to 1 if platform has the time.h header file,
+        and implementation of functions thereof.
+*/
+#ifndef USE_CLOCK
+#define USE_CLOCK 0
+#endif
+/* Configuration : HAS_STDIO
+        Define to 1 if the platform has stdio.h.
+*/
+#ifndef HAS_STDIO
+#define HAS_STDIO 0
+#endif
+/* Configuration : HAS_PRINTF
+        Define to 1 if the platform has stdio.h and implements the printf
+   function.
+*/
+#ifndef HAS_PRINTF
+#define HAS_PRINTF 0
+#endif
+
+/* Definitions : COMPILER_VERSION, COMPILER_FLAGS, MEM_LOCATION
+        Initialize these strings per platform
+*/
+#ifndef COMPILER_VERSION
+#ifdef __GNUC__
+#define COMPILER_VERSION "GCC"__VERSION__
+#else
+#define COMPILER_VERSION "Please put compiler version here (e.g. gcc 4.1)"
+#endif
+#endif
+#ifndef COMPILER_FLAGS
+#define COMPILER_FLAGS \
+    FLAGS_STR /* "Please put compiler flags here (e.g. -o3)" */
+#endif
+#ifndef MEM_LOCATION
+#define MEM_LOCATION "STACK"
+#endif
+
+/* Data Types :
+        To avoid compiler issues, define the data types that need ot be used for
+   8b, 16b and 32b in <core_portme.h>.
+
+        *Imprtant* :
+        ee_ptr_int needs to be the data type used to hold pointers, otherwise
+   coremark may fail!!!
+*/
+typedef signed short   ee_s16;
+typedef unsigned short ee_u16;
+typedef signed int     ee_s32;
+typedef double         ee_f32;
+typedef unsigned char  ee_u8;
+typedef unsigned int   ee_u32;
+typedef ee_u32         ee_ptr_int;
+typedef ee_u32         ee_size_t;
+#define NULL ((void *)0)
+/* align_mem :
+        This macro is used to align an offset to point to a 32b value. It is
+   used in the Matrix algorithm to initialize the input memory blocks.
+*/
+#define align_mem(x) (void *)(4 + (((ee_ptr_int)(x)-1) & ~3))
+
+/* Configuration : CORE_TICKS
+        Define type of return from the timing functions.
+ */
+#define CORETIMETYPE ee_u32
+typedef ee_u32 CORE_TICKS;
+
+/* Configuration : SEED_METHOD
+        Defines method to get seed values that cannot be computed at compile
+   time.
+
+        Valid values :
+        SEED_ARG - from command line.
+        SEED_FUNC - from a system function.
+        SEED_VOLATILE - from volatile variables.
+*/
+#ifndef SEED_METHOD
+#define SEED_METHOD SEED_VOLATILE
+#endif
+
+/* Configuration : MEM_METHOD
+        Defines method to get a block of memry.
+
+        Valid values :
+        MEM_MALLOC - for platforms that implement malloc and have malloc.h.
+        MEM_STATIC - to use a static memory array.
+        MEM_STACK - to allocate the data block on the stack (NYI).
+*/
+#ifndef MEM_METHOD
+#define MEM_METHOD MEM_STACK
+#endif
+
+/* Configuration : MULTITHREAD
+        Define for parallel execution
+
+        Valid values :
+        1 - only one context (default).
+        N>1 - will execute N copies in parallel.
+
+        Note :
+        If this flag is defined to more then 1, an implementation for launching
+   parallel contexts must be defined.
+
+        Two sample implementations are provided. Use <USE_PTHREAD> or <USE_FORK>
+   to enable them.
+
+        It is valid to have a different implementation of <core_start_parallel>
+   and <core_end_parallel> in <core_portme.c>, to fit a particular architecture.
+*/
+#ifndef MULTITHREAD
+#define MULTITHREAD 1
+#define USE_PTHREAD 0
+#define USE_FORK    0
+#define USE_SOCKET  0
+#endif
+
+/* Configuration : MAIN_HAS_NOARGC
+        Needed if platform does not support getting arguments to main.
+
+        Valid values :
+        0 - argc/argv to main is supported
+        1 - argc/argv to main is not supported
+
+        Note :
+        This flag only matters if MULTITHREAD has been defined to a value
+   greater then 1.
+*/
+#ifndef MAIN_HAS_NOARGC
+#define MAIN_HAS_NOARGC 0
+#endif
+
+/* Configuration : MAIN_HAS_NORETURN
+        Needed if platform does not support returning a value from main.
+
+        Valid values :
+        0 - main returns an int, and return value will be 0.
+        1 - platform does not support returning a value from main
+*/
+#ifndef MAIN_HAS_NORETURN
+#define MAIN_HAS_NORETURN 0
+#endif
+
+/* Variable : default_num_contexts
+        Not used for this simple port, must cintain the value 1.
+*/
+extern ee_u32 default_num_contexts;
+
+typedef struct CORE_PORTABLE_S
+{
+    ee_u8 portable_id;
+} core_portable;
+
+/* target specific init/fini */
+void portable_init(core_portable *p, int *argc, char *argv[]);
+void portable_fini(core_portable *p);
+
+#if !defined(PROFILE_RUN) && !defined(PERFORMANCE_RUN) \
+    && !defined(VALIDATION_RUN)
+#if (TOTAL_DATA_SIZE == 1200)
+#define PROFILE_RUN 1
+#elif (TOTAL_DATA_SIZE == 2000)
+#define PERFORMANCE_RUN 1
+#else
+#define VALIDATION_RUN 1
+#endif
+#endif
+
+int ee_printf(const char *fmt, ...);
+
+#endif /* CORE_PORTME_H */

benchmarks/coremark/cvt.c

@@ -0,0 +1,127 @@
+/*
+Copyright 2018 Embedded Microprocessor Benchmark Consortium (EEMBC)
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+#include <math.h>
+#define CVTBUFSIZE 80
+static char CVTBUF[CVTBUFSIZE];
+
+static char *
+cvt(double arg, int ndigits, int *decpt, int *sign, char *buf, int eflag)
+{
+    int    r2;
+    double fi, fj;
+    char * p, *p1;
+
+    if (ndigits < 0)
+        ndigits = 0;
+    if (ndigits >= CVTBUFSIZE - 1)
+        ndigits = CVTBUFSIZE - 2;
+    r2    = 0;
+    *sign = 0;
+    p     = &buf[0];
+    if (arg < 0)
+    {
+        *sign = 1;
+        arg   = -arg;
+    }
+    arg = modf(arg, &fi);
+    p1  = &buf[CVTBUFSIZE];
+
+    if (fi != 0)
+    {
+        p1 = &buf[CVTBUFSIZE];
+        while (fi != 0)
+        {
+            fj    = modf(fi / 10, &fi);
+            *--p1 = (int)((fj + .03) * 10) + '0';
+            r2++;
+        }
+        while (p1 < &buf[CVTBUFSIZE])
+            *p++ = *p1++;
+    }
+    else if (arg > 0)
+    {
+        while ((fj = arg * 10) < 1)
+        {
+            arg = fj;
+            r2--;
+        }
+    }
+    p1 = &buf[ndigits];
+    if (eflag == 0)
+        p1 += r2;
+    *decpt = r2;
+    if (p1 < &buf[0])
+    {
+        buf[0] = '\0';
+        return buf;
+    }
+    while (p <= p1 && p < &buf[CVTBUFSIZE])
+    {
+        arg *= 10;
+        arg  = modf(arg, &fj);
+        *p++ = (int)fj + '0';
+    }
+    if (p1 >= &buf[CVTBUFSIZE])
+    {
+        buf[CVTBUFSIZE - 1] = '\0';
+        return buf;
+    }
+    p = p1;
+    *p1 += 5;
+    while (*p1 > '9')
+    {
+        *p1 = '0';
+        if (p1 > buf)
+            ++*--p1;
+        else
+        {
+            *p1 = '1';
+            (*decpt)++;
+            if (eflag == 0)
+            {
+                if (p > buf)
+                    *p = '0';
+                p++;
+            }
+        }
+    }
+    *p = '\0';
+    return buf;
+}
+
+char *
+ecvt(double arg, int ndigits, int *decpt, int *sign)
+{
+    return cvt(arg, ndigits, decpt, sign, CVTBUF, 1);
+}
+
+char *
+ecvtbuf(double arg, int ndigits, int *decpt, int *sign, char *buf)
+{
+    return cvt(arg, ndigits, decpt, sign, buf, 1);
+}
+
+char *
+fcvt(double arg, int ndigits, int *decpt, int *sign)
+{
+    return cvt(arg, ndigits, decpt, sign, CVTBUF, 0);
+}
+
+char *
+fcvtbuf(double arg, int ndigits, int *decpt, int *sign, char *buf)
+{
+    return cvt(arg, ndigits, decpt, sign, buf, 0);
+}

benchmarks/coremark/ee_printf.c

@@ -0,0 +1,705 @@
+/*
+Copyright 2018 Embedded Microprocessor Benchmark Consortium (EEMBC)
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+*/
+
+#include <coremark.h>
+#include <stdarg.h>
+
+#define ZEROPAD   (1 << 0) /* Pad with zero */
+#define SIGN      (1 << 1) /* Unsigned/signed long */
+#define PLUS      (1 << 2) /* Show plus */
+#define SPACE     (1 << 3) /* Spacer */
+#define LEFT      (1 << 4) /* Left justified */
+#define HEX_PREP  (1 << 5) /* 0x */
+#define UPPERCASE (1 << 6) /* 'ABCDEF' */
+
+#define is_digit(c) ((c) >= '0' && (c) <= '9')
+
+static char *    digits       = "0123456789abcdefghijklmnopqrstuvwxyz";
+static char *    upper_digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
+static ee_size_t strnlen(const char *s, ee_size_t count);
+
+static ee_size_t
+strnlen(const char *s, ee_size_t count)
+{
+    const char *sc;
+    for (sc = s; *sc != '\0' && count--; ++sc)
+        ;
+    return sc - s;
+}
+
+static int
+skip_atoi(const char **s)
+{
+    int i = 0;
+    while (is_digit(**s))
+        i = i * 10 + *((*s)++) - '0';
+    return i;
+}
+
+static char *
+number(char *str, long num, int base, int size, int precision, int type)
+{
+    char  c, sign, tmp[66];
+    char *dig = digits;
+    int   i;
+
+    if (type & UPPERCASE)
+        dig = upper_digits;
+    if (type & LEFT)
+        type &= ~ZEROPAD;
+    if (base < 2 || base > 36)
+        return 0;
+
+    c    = (type & ZEROPAD) ? '0' : ' ';
+    sign = 0;
+    if (type & SIGN)
+    {
+        if (num < 0)
+        {
+            sign = '-';
+            num  = -num;
+            size--;
+        }
+        else if (type & PLUS)
+        {
+            sign = '+';
+            size--;
+        }
+        else if (type & SPACE)
+        {
+            sign = ' ';
+            size--;
+        }
+    }
+
+    if (type & HEX_PREP)
+    {
+        if (base == 16)
+            size -= 2;
+        else if (base == 8)
+            size--;
+    }
+
+    i = 0;
+
+    if (num == 0)
+        tmp[i++] = '0';
+    else
+    {
+        while (num != 0)
+        {
+            tmp[i++] = dig[((unsigned long)num) % (unsigned)base];
+            num      = ((unsigned long)num) / (unsigned)base;
+        }
+    }
+
+    if (i > precision)
+        precision = i;
+    size -= precision;
+    if (!(type & (ZEROPAD | LEFT)))
+        while (size-- > 0)
+            *str++ = ' ';
+    if (sign)
+        *str++ = sign;
+
+    if (type & HEX_PREP)
+    {
+        if (base == 8)
+            *str++ = '0';
+        else if (base == 16)
+        {
+            *str++ = '0';
+            *str++ = digits[33];
+        }
+    }
+
+    if (!(type & LEFT))
+        while (size-- > 0)
+            *str++ = c;
+    while (i < precision--)
+        *str++ = '0';
+    while (i-- > 0)
+        *str++ = tmp[i];
+    while (size-- > 0)
+        *str++ = ' ';
+
+    return str;
+}
+
+static char *
+eaddr(char *str, unsigned char *addr, int size, int precision, int type)
+{
+    char  tmp[24];
+    char *dig = digits;
+    int   i, len;
+
+    if (type & UPPERCASE)
+        dig = upper_digits;
+    len = 0;
+    for (i = 0; i < 6; i++)
+    {
+        if (i != 0)
+            tmp[len++] = ':';
+        tmp[len++] = dig[addr[i] >> 4];
+        tmp[len++] = dig[addr[i] & 0x0F];
+    }
+
+    if (!(type & LEFT))
+        while (len < size--)
+            *str++ = ' ';
+    for (i = 0; i < len; ++i)
+        *str++ = tmp[i];
+    while (len < size--)
+        *str++ = ' ';
+
+    return str;
+}
+
+static char *
+iaddr(char *str, unsigned char *addr, int size, int precision, int type)
+{
+    char tmp[24];
+    int  i, n, len;
+
+    len = 0;
+    for (i = 0; i < 4; i++)
+    {
+        if (i != 0)
+            tmp[len++] = '.';
+        n = addr[i];
+
+        if (n == 0)
+            tmp[len++] = digits[0];
+        else
+        {
+            if (n >= 100)
+            {
+                tmp[len++] = digits[n / 100];
+                n          = n % 100;
+                tmp[len++] = digits[n / 10];
+                n          = n % 10;
+            }
+            else if (n >= 10)
+            {
+                tmp[len++] = digits[n / 10];
+                n          = n % 10;
+            }
+
+            tmp[len++] = digits[n];
+        }
+    }
+
+    if (!(type & LEFT))
+        while (len < size--)
+            *str++ = ' ';
+    for (i = 0; i < len; ++i)
+        *str++ = tmp[i];
+    while (len < size--)
+        *str++ = ' ';
+
+    return str;
+}
+
+#if HAS_FLOAT
+
+char *      ecvtbuf(double arg, int ndigits, int *decpt, int *sign, char *buf);
+char *      fcvtbuf(double arg, int ndigits, int *decpt, int *sign, char *buf);
+static void ee_bufcpy(char *d, char *s, int count);
+
+void
+ee_bufcpy(char *pd, char *ps, int count)
+{
+    char *pe = ps + count;
+    while (ps != pe)
+        *pd++ = *ps++;
+}
+
+static void
+parse_float(double value, char *buffer, char fmt, int precision)
+{
+    int   decpt, sign, exp, pos;
+    char *digits = NULL;
+    char  cvtbuf[80];
+    int   capexp = 0;
+    int   magnitude;
+
+    if (fmt == 'G' || fmt == 'E')
+    {
+        capexp = 1;
+        fmt += 'a' - 'A';
+    }
+
+    if (fmt == 'g')
+    {
+        digits    = ecvtbuf(value, precision, &decpt, &sign, cvtbuf);
+        magnitude = decpt - 1;
+        if (magnitude < -4 || magnitude > precision - 1)
+        {
+            fmt = 'e';
+            precision -= 1;
+        }
+        else
+        {
+            fmt = 'f';
+            precision -= decpt;
+        }
+    }
+
+    if (fmt == 'e')
+    {
+        digits = ecvtbuf(value, precision + 1, &decpt, &sign, cvtbuf);
+
+        if (sign)
+            *buffer++ = '-';
+        *buffer++ = *digits;
+        if (precision > 0)
+            *buffer++ = '.';
+        ee_bufcpy(buffer, digits + 1, precision);
+        buffer += precision;
+        *buffer++ = capexp ? 'E' : 'e';
+
+        if (decpt == 0)
+        {
+            if (value == 0.0)
+                exp = 0;
+            else
+                exp = -1;
+        }
+        else
+            exp = decpt - 1;
+
+        if (exp < 0)
+        {
+            *buffer++ = '-';
+            exp       = -exp;
+        }
+        else
+            *buffer++ = '+';
+
+        buffer[2] = (exp % 10) + '0';
+        exp       = exp / 10;
+        buffer[1] = (exp % 10) + '0';
+        exp       = exp / 10;
+        buffer[0] = (exp % 10) + '0';
+        buffer += 3;
+    }
+    else if (fmt == 'f')
+    {
+        digits = fcvtbuf(value, precision, &decpt, &sign, cvtbuf);
+        if (sign)
+            *buffer++ = '-';
+        if (*digits)
+        {
+            if (decpt <= 0)
+            {
+                *buffer++ = '0';
+                *buffer++ = '.';
+                for (pos = 0; pos < -decpt; pos++)
+                    *buffer++ = '0';
+                while (*digits)
+                    *buffer++ = *digits++;
+            }
+            else
+            {
+                pos = 0;
+                while (*digits)
+                {
+                    if (pos++ == decpt)
+                        *buffer++ = '.';
+                    *buffer++ = *digits++;
+                }
+            }
+        }
+        else
+        {
+            *buffer++ = '0';
+            if (precision > 0)
+            {
+                *buffer++ = '.';
+                for (pos = 0; pos < precision; pos++)
+                    *buffer++ = '0';
+            }
+        }
+    }
+
+    *buffer = '\0';
+}
+
+static void
+decimal_point(char *buffer)
+{
+    while (*buffer)
+    {
+        if (*buffer == '.')
+            return;
+        if (*buffer == 'e' || *buffer == 'E')
+            break;
+        buffer++;
+    }
+
+    if (*buffer)
+    {
+        int n = strnlen(buffer, 256);
+        while (n > 0)
+        {
+            buffer[n + 1] = buffer[n];
+            n--;
+        }
+
+        *buffer = '.';
+    }
+    else
+    {
+        *buffer++ = '.';
+        *buffer   = '\0';
+    }
+}
+
+static void
+cropzeros(char *buffer)
+{
+    char *stop;
+
+    while (*buffer && *buffer != '.')
+        buffer++;
+    if (*buffer++)
+    {
+        while (*buffer && *buffer != 'e' && *buffer != 'E')
+            buffer++;
+        stop = buffer--;
+        while (*buffer == '0')
+            buffer--;
+        if (*buffer == '.')
+            buffer--;
+        while (buffer != stop)
+            *++buffer = 0;
+    }
+}
+
+static char *
+flt(char *str, double num, int size, int precision, char fmt, int flags)
+{
+    char tmp[80];
+    char c, sign;
+    int  n, i;
+
+    // Left align means no zero padding
+    if (flags & LEFT)
+        flags &= ~ZEROPAD;
+
+    // Determine padding and sign char
+    c    = (flags & ZEROPAD) ? '0' : ' ';
+    sign = 0;
+    if (flags & SIGN)
+    {
+        if (num < 0.0)
+        {
+            sign = '-';
+            num  = -num;
+            size--;
+        }
+        else if (flags & PLUS)
+        {
+            sign = '+';
+            size--;
+        }
+        else if (flags & SPACE)
+        {
+            sign = ' ';
+            size--;
+        }
+    }
+
+    // Compute the precision value
+    if (precision < 0)
+        precision = 6; // Default precision: 6
+
+    // Convert floating point number to text
+    parse_float(num, tmp, fmt, precision);
+
+    if ((flags & HEX_PREP) && precision == 0)
+        decimal_point(tmp);
+    if (fmt == 'g' && !(flags & HEX_PREP))
+        cropzeros(tmp);
+
+    n = strnlen(tmp, 256);
+
+    // Output number with alignment and padding
+    size -= n;
+    if (!(flags & (ZEROPAD | LEFT)))
+        while (size-- > 0)
+            *str++ = ' ';
+    if (sign)
+        *str++ = sign;
+    if (!(flags & LEFT))
+        while (size-- > 0)
+            *str++ = c;
+    for (i = 0; i < n; i++)
+        *str++ = tmp[i];
+    while (size-- > 0)
+        *str++ = ' ';
+
+    return str;
+}
+
+#endif
+
+static int
+ee_vsprintf(char *buf, const char *fmt, va_list args)
+{
+    int           len;
+    unsigned long num;
+    int           i, base;
+    char *        str;
+    char *        s;
+
+    int flags; // Flags to number()
+
+    int field_width; // Width of output field
+    int precision;   // Min. # of digits for integers; max number of chars for
+                     // from string
+    int qualifier;   // 'h', 'l', or 'L' for integer fields
+
+    for (str = buf; *fmt; fmt++)
+    {
+        if (*fmt != '%')
+        {
+            *str++ = *fmt;
+            continue;
+        }
+
+        // Process flags
+        flags = 0;
+    repeat:
+        fmt++; // This also skips first '%'
+        switch (*fmt)
+        {
+            case '-':
+                flags |= LEFT;
+                goto repeat;
+            case '+':
+                flags |= PLUS;
+                goto repeat;
+            case ' ':
+                flags |= SPACE;
+                goto repeat;
+            case '#':
+                flags |= HEX_PREP;
+                goto repeat;
+            case '0':
+                flags |= ZEROPAD;
+                goto repeat;
+        }
+
+        // Get field width
+        field_width = -1;
+        if (is_digit(*fmt))
+            field_width = skip_atoi(&fmt);
+        else if (*fmt == '*')
+        {
+            fmt++;
+            field_width = va_arg(args, int);
+            if (field_width < 0)
+            {
+                field_width = -field_width;
+                flags |= LEFT;
+            }
+        }
+
+        // Get the precision
+        precision = -1;
+        if (*fmt == '.')
+        {
+            ++fmt;
+            if (is_digit(*fmt))
+                precision = skip_atoi(&fmt);
+            else if (*fmt == '*')
+            {
+                ++fmt;
+                precision = va_arg(args, int);
+            }
+            if (precision < 0)
+                precision = 0;
+        }
+
+        // Get the conversion qualifier
+        qualifier = -1;
+        if (*fmt == 'l' || *fmt == 'L')
+        {
+            qualifier = *fmt;
+            fmt++;
+        }
+
+        // Default base
+        base = 10;
+
+        switch (*fmt)
+        {
+            case 'c':
+                if (!(flags & LEFT))
+                    while (--field_width > 0)
+                        *str++ = ' ';
+                *str++ = (unsigned char)va_arg(args, int);
+                while (--field_width > 0)
+                    *str++ = ' ';
+                continue;
+
+            case 's':
+                s = va_arg(args, char *);
+                if (!s)
+                    s = "<NULL>";
+                len = strnlen(s, precision);
+                if (!(flags & LEFT))
+                    while (len < field_width--)
+                        *str++ = ' ';
+                for (i = 0; i < len; ++i)
+                    *str++ = *s++;
+                while (len < field_width--)
+                    *str++ = ' ';
+                continue;
+
+            case 'p':
+                if (field_width == -1)
+                {
+                    field_width = 2 * sizeof(void *);
+                    flags |= ZEROPAD;
+                }
+                str = number(str,
+                             (unsigned long)va_arg(args, void *),
+                             16,
+                             field_width,
+                             precision,
+                             flags);
+                continue;
+
+            case 'A':
+                flags |= UPPERCASE;
+
+            case 'a':
+                if (qualifier == 'l')
+                    str = eaddr(str,
+                                va_arg(args, unsigned char *),
+                                field_width,
+                                precision,
+                                flags);
+                else
+                    str = iaddr(str,
+                                va_arg(args, unsigned char *),
+                                field_width,
+                                precision,
+                                flags);
+                continue;
+
+            // Integer number formats - set up the flags and "break"
+            case 'o':
+                base = 8;
+                break;
+
+            case 'X':
+                flags |= UPPERCASE;
+
+            case 'x':
+                base = 16;
+                break;
+
+            case 'd':
+            case 'i':
+                flags |= SIGN;
+
+            case 'u':
+                break;
+
+#if HAS_FLOAT
+
+            case 'f':
+                str = flt(str,
+                          va_arg(args, double),
+                          field_width,
+                          precision,
+                          *fmt,
+                          flags | SIGN);
+                continue;
+
+#endif
+
+            default:
+                if (*fmt != '%')
+                    *str++ = '%';
+                if (*fmt)
+                    *str++ = *fmt;
+                else
+                    --fmt;
+                continue;
+        }
+
+        if (qualifier == 'l')
+            num = va_arg(args, unsigned long);
+        else if (flags & SIGN)
+            num = va_arg(args, int);
+        else
+            num = va_arg(args, unsigned int);
+
+        str = number(str, num, base, field_width, precision, flags);
+    }
+
+    *str = '\0';
+    return str - buf;
+}
+
+#include <platform.h>
+
+void
+uart_send_char(char c)
+{
+#if defined(BOARD_ehrenberg)
+            while (get_uart_rx_tx_reg_tx_free(uart)==0) ;
+            uart_write(uart, c);
+            if (c == '\n') {
+                while (get_uart_rx_tx_reg_tx_free(uart)==0) ;
+                uart_write(uart, '\r');
+            }
+#elif defined(BOARD_iss)
+            *((uint32_t*) 0xFFFF0000) = c;
+#else
+            while (UART0_REG(UART_REG_TXFIFO) & 0x80000000) ;
+            UART0_REG(UART_REG_TXFIFO) = c;
+            if (c == '\n') {
+                while (UART0_REG(UART_REG_TXFIFO) & 0x80000000) ;
+                UART0_REG(UART_REG_TXFIFO) = '\r';
+            }
+#endif
+}
+
+int
+ee_printf(const char *fmt, ...)
+{
+    char    buf[1024], *p;
+    va_list args;
+    int     n = 0;
+
+    va_start(args, fmt);
+    ee_vsprintf(buf, fmt, args);
+    va_end(args);
+    p = buf;
+    while (*p)
+    {
+        uart_send_char(*p);
+        n++;
+        p++;
+    }
+
+    return n;
+}

benchmarks/dhrystone/.cproject

@@ -14,7 +14,7 @@
 				</extensions>
 			</storageModule>
 			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration buildProperties="" id="cdt.managedbuild.toolchain.gnu.cross.base.574338120" name="Default" parent="org.eclipse.cdt.build.core.emptycfg">
+				<configuration buildProperties="" id="cdt.managedbuild.toolchain.gnu.cross.base.574338120" name="Default" optionalBuildProperties="" parent="org.eclipse.cdt.build.core.emptycfg">
 					<folderInfo id="cdt.managedbuild.toolchain.gnu.cross.base.574338120.193230058" name="/" resourcePath="">
 						<toolChain id="cdt.managedbuild.toolchain.gnu.cross.base.1380433779" name="Cross GCC" superClass="cdt.managedbuild.toolchain.gnu.cross.base">
 							<option id="cdt.managedbuild.option.gnu.cross.prefix.1116043753" name="Prefix" superClass="cdt.managedbuild.option.gnu.cross.prefix"/>
@@ -57,6 +57,7 @@
 		<buildTargets>
 			<target name="all" path="" targetID="org.eclipse.cdt.build.MakeTargetBuilder">
 				<buildCommand>make</buildCommand>
+				<buildArguments/>
 				<buildTarget>all</buildTarget>
 				<stopOnError>true</stopOnError>
 				<useDefaultCommand>true</useDefaultCommand>
@@ -64,12 +65,27 @@
 			</target>
 			<target name="clean" path="" targetID="org.eclipse.cdt.build.MakeTargetBuilder">
 				<buildCommand>make</buildCommand>
-				<buildArguments/>
 				<buildTarget>clean</buildTarget>
 				<stopOnError>true</stopOnError>
 				<useDefaultCommand>true</useDefaultCommand>
 				<runAllBuilders>true</runAllBuilders>
 			</target>
+			<target name="all BOARD=tgc-vp" path="" targetID="org.eclipse.cdt.build.MakeTargetBuilder">
+				<buildCommand>make</buildCommand>
+				<buildArguments/>
+				<buildTarget>all BOARD=tgc-vp</buildTarget>
+				<stopOnError>true</stopOnError>
+				<useDefaultCommand>true</useDefaultCommand>
+				<runAllBuilders>true</runAllBuilders>
+			</target>
+			<target name="all BOARD=iss" path="" targetID="org.eclipse.cdt.build.MakeTargetBuilder">
+				<buildCommand>make</buildCommand>
+				<buildArguments/>
+				<buildTarget>all BOARD=iss</buildTarget>
+				<stopOnError>true</stopOnError>
+				<useDefaultCommand>true</useDefaultCommand>
+				<runAllBuilders>true</runAllBuilders>
+			</target>
 		</buildTargets>
 	</storageModule>
 </cproject>

benchmarks/dhrystone/.gitignore

@@ -0,0 +1,2 @@
+dhrystone
+/dhrystone.dis

benchmarks/dhrystone/.project

@@ -3,7 +3,7 @@
 	<name>dhrystone</name>
 	<comment></comment>
 	<projects>
-		<project>bsp</project>
+		<project>bare-metal-bsp</project>
 	</projects>
 	<buildSpec>
 		<buildCommand>

benchmarks/dhrystone/Makefile

@@ -0,0 +1,24 @@
+TARGET := dhrystone
+ISA?=imc
+ITERATIONS?=50000 # 20000 for TGC
+
+ASM_SRCS := 
+C_SRCS := dhry_stubs.c dhry_1.c dhry_2.c
+HEADERS := dhry.h
+
+BOARD?=iss
+LINK_TARGET=link
+RISCV_ARCH:=rv32$(ISA)
+ifeq ($(ISA),e)
+    RISCV_ABI:=ilp32e
+else
+    RISCV_ABI:=ilp32
+endif
+# '-lgcc -lm' are needed to add softfloat routines
+CFLAGS  := -g -O3 -DITERATIONS=$(ITERATIONS) -DHZ=32768 -DTIME -DNO_INIT -fno-inline -fno-builtin-printf -fno-common -Wno-implicit \
+ -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las
+
+TOOL_DIR=$(dir $(compiler))
+
+BSP_BASE = ../../bare-metal-bsp
+include $(BSP_BASE)/env/common-gcc.mk

benchmarks/dhrystone/dhry_1.c

@@ -16,6 +16,7 @@
  */
 
 #include "dhry.h"
+extern char* strcpy(char* dest, const char* src);
 
 /* Global Variables: */
 
@@ -258,9 +259,9 @@ main ()
   else
   {
 #ifdef TIME
-    Microseconds = (float) User_Time * Mic_secs_Per_Second 
+    Microseconds = ((float) User_Time/(float)HZ) * Mic_secs_Per_Second
                         / (float) Number_Of_Runs;
-    Dhrystones_Per_Second = (float) Number_Of_Runs / (float) User_Time;
+    Dhrystones_Per_Second = (float) Number_Of_Runs / ((float) User_Time/(float)HZ);
 #else
     Microseconds = (float) User_Time * Mic_secs_Per_Second 
                         / ((float) HZ * ((float) Number_Of_Runs));

benchmarks/dhrystone/dhry_stubs.c

@@ -1,24 +1,25 @@
 #include "platform.h"
+#ifndef ITERATIONS
+#define ITERATIONS 20000
+#endif
 
 /* The functions in this file are only meant to support Dhrystone on an
  * embedded RV32 system and are obviously incorrect in general. */
 
 long time(void)
 {
-  return get_timer_value() / get_timer_freq();
+  return get_timer_value();
 }
 
 // set the number of dhrystone iterations
 void __wrap_scanf(const char* fmt, int* n)
 {
-//  *n = 100000000;
+  *n = ITERATIONS;
-  *n = 1000000;
 }
 
-volatile uint64_t tohost;
+extern volatile uint32_t tohost;
-volatile uint64_t fromhost;
 
-void __wrap_exit(int n){
+void exit(int n){
       tohost = 0x1;
       for (;;);
 }

demo_gpio/.cproject

@@ -1,168 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
-	<storageModule moduleId="org.eclipse.cdt.core.settings">
-		<cconfiguration id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.debug.516870870">
-			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.debug.516870870" moduleId="org.eclipse.cdt.core.settings" name="Debug">
-				<externalSettings/>
-				<extensions>
-					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
-					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.MakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.autotools.core.ErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="de.marw.cdt.cmake.core.CMakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-				</extensions>
-			</storageModule>
-			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug" cleanCommand="${cross_rm} -rf" description="" id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.debug.516870870" name="Debug" optionalBuildProperties="org.eclipse.cdt.docker.launcher.containerbuild.property.selectedvolumes=,org.eclipse.cdt.docker.launcher.containerbuild.property.volumes=" parent="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.debug.516870870">
-					<folderInfo id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.debug.516870870." name="/" resourcePath="">
-						<toolChain id="ilg.gnumcueclipse.managedbuild.cross.riscv.toolchain.elf.debug.108811797" name="RISC-V Cross GCC">
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createflash.8320194" name="Create flash image" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createflash" useByScannerDiscovery="false" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createlisting.379436257" name="Create extended listing" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createlisting" useByScannerDiscovery="false"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.printsize.1043841176" name="Print size" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.printsize" useByScannerDiscovery="false" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.level.383399415" name="Optimization Level" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.level" useByScannerDiscovery="true" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.level.more" valueType="enumerated"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.messagelength.178339006" name="Message length (-fmessage-length=0)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.messagelength" useByScannerDiscovery="true" value="false" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.signedchar.119459497" name="'char' is signed (-fsigned-char)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.signedchar" useByScannerDiscovery="true" value="false" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.functionsections.735578493" name="Function sections (-ffunction-sections)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.functionsections" useByScannerDiscovery="true" value="false" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.datasections.663648478" name="Data sections (-fdata-sections)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.datasections" useByScannerDiscovery="true" value="false" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.level.33211902" name="Debug level" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.level" useByScannerDiscovery="true" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.level.max" valueType="enumerated"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.format.1212459035" name="Debug format" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.format" useByScannerDiscovery="true"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.toolchain.name.2118228106" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.toolchain.name" useByScannerDiscovery="false" value="RISC-V GCC/Newlib" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.prefix.1953815021" name="Prefix" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.prefix" useByScannerDiscovery="false" value="riscv64-unknown-elf-" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.c.739203741" name="C compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.c" useByScannerDiscovery="false" value="gcc" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.cpp.1844392607" name="C++ compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.cpp" useByScannerDiscovery="false" value="g++" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.ar.2006331761" name="Archiver" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.ar" useByScannerDiscovery="false" value="ar" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objcopy.953275776" name="Hex/Bin converter" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objcopy" useByScannerDiscovery="false" value="objcopy" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objdump.1629820216" name="Listing generator" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objdump" useByScannerDiscovery="false" value="objdump" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.size.1139290195" name="Size command" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.size" useByScannerDiscovery="false" value="size" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.make.598152082" name="Build command" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.make" useByScannerDiscovery="false" value="make" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.rm.1903820766" name="Remove command" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.rm" useByScannerDiscovery="false" value="rm" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.base.274413758" name="Architecture" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.base" useByScannerDiscovery="false" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.arch.rv32i" valueType="enumerated"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.multiply.1227968882" name="Multiply extension (RVM)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.multiply" useByScannerDiscovery="false" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.atomic.25268933" name="Atomic extension (RVA)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.atomic" useByScannerDiscovery="false" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.compressed.148707865" name="Compressed extension (RVC)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.isa.compressed" useByScannerDiscovery="false" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.abi.integer.2137340048" name="Integer ABI" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.abi.integer" useByScannerDiscovery="false" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.abi.integer.ilp32" valueType="enumerated"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.codemodel.93793405" name="Code model" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.codemodel" useByScannerDiscovery="false" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.target.codemodel.any" valueType="enumerated"/>
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="ilg.gnumcueclipse.managedbuild.cross.riscv.targetPlatform.1301923652" isAbstract="false" osList="all"/>
-							<builder buildPath="${workspace_loc:/demo_gpio}/Debug" id="ilg.gnumcueclipse.managedbuild.cross.riscv.builder.1496635672" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder"/>
-						</toolChain>
-					</folderInfo>
-				</configuration>
-			</storageModule>
-			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
-			<storageModule moduleId="ilg.gnumcueclipse.managedbuild.packs"/>
-		</cconfiguration>
-		<cconfiguration id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1992646408">
-			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1992646408" moduleId="org.eclipse.cdt.core.settings" name="Release">
-				<externalSettings/>
-				<extensions>
-					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
-					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
-					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
-				</extensions>
-			</storageModule>
-			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="${cross_rm} -rf" description="" id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1992646408" name="Release" optionalBuildProperties="org.eclipse.cdt.docker.launcher.containerbuild.property.selectedvolumes=,org.eclipse.cdt.docker.launcher.containerbuild.property.volumes=" parent="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release">
-					<folderInfo id="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1992646408." name="/" resourcePath="">
-						<toolChain id="ilg.gnumcueclipse.managedbuild.cross.riscv.toolchain.elf.release.1937283388" name="RISC-V Cross GCC" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.toolchain.elf.release">
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createflash.672219611" name="Create flash image" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createflash" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createlisting.1692672647" name="Create extended listing" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.createlisting"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.printsize.1955835524" name="Print size" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.addtools.printsize" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.level.1634926912" name="Optimization Level" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.level" value="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.level.size" valueType="enumerated"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.messagelength.1936180446" name="Message length (-fmessage-length=0)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.messagelength" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.signedchar.148983493" name="'char' is signed (-fsigned-char)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.signedchar" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.functionsections.2117145633" name="Function sections (-ffunction-sections)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.functionsections" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.datasections.1653949713" name="Data sections (-fdata-sections)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.optimization.datasections" value="true" valueType="boolean"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.level.728682044" name="Debug level" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.level"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.format.1767313058" name="Debug format" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.debugging.format"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.toolchain.name.254213830" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.toolchain.name" value="RISC-V GCC/Newlib" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.prefix.372256120" name="Prefix" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.prefix" value="riscv64-unknown-elf-" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.c.298542489" name="C compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.c" value="gcc" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.cpp.1240126358" name="C++ compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.cpp" value="g++" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.ar.170388081" name="Archiver" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.ar" value="ar" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objcopy.1277104890" name="Hex/Bin converter" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objcopy" value="objcopy" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objdump.488685269" name="Listing generator" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.objdump" value="objdump" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.size.554860593" name="Size command" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.size" value="size" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.make.468110366" name="Build command" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.make" value="make" valueType="string"/>
-							<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.rm.309041178" name="Remove command" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.command.rm" value="rm" valueType="string"/>
-							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="ilg.gnumcueclipse.managedbuild.cross.riscv.targetPlatform.687762738" isAbstract="false" osList="all" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.targetPlatform"/>
-							<builder buildPath="${workspace_loc:/demo_gpio}/Release" id="ilg.gnumcueclipse.managedbuild.cross.riscv.builder.609463428" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.builder"/>
-							<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.assembler.1648537074" name="GNU RISC-V Cross Assembler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.assembler">
-								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.assembler.usepreprocessor.1113623358" name="Use preprocessor" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.assembler.usepreprocessor" value="true" valueType="boolean"/>
-								<inputType id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.assembler.input.1033931684" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.assembler.input"/>
-							</tool>
-							<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.1778523424" name="GNU RISC-V Cross C Compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler">
-								<inputType id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.input.1714150627" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.input"/>
-							</tool>
-							<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.cpp.compiler.669753833" name="GNU RISC-V Cross C++ Compiler" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.cpp.compiler"/>
-							<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.linker.1530679232" name="GNU RISC-V Cross C Linker" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.linker">
-								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.gcsections.1637900674" name="Remove unused sections (-Xlinker --gc-sections)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.c.linker.gcsections" value="true" valueType="boolean"/>
-								<inputType id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.linker.input.1335245598" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.linker.input">
-									<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
-									<additionalInput kind="additionalinput" paths="$(LIBS)"/>
-								</inputType>
-							</tool>
-							<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.cpp.linker.648232936" name="GNU RISC-V Cross C++ Linker" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.cpp.linker">
-								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.gcsections.929507343" name="Remove unused sections (-Xlinker --gc-sections)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.cpp.linker.gcsections" value="true" valueType="boolean"/>
-							</tool>
-							<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.archiver.439296099" name="GNU RISC-V Cross Archiver" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.archiver"/>
-							<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.createflash.2024214820" name="GNU RISC-V Cross Create Flash Image" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.createflash"/>
-							<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.createlisting.1648338834" name="GNU RISC-V Cross Create Listing" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.createlisting">
-								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.source.1291642104" name="Display source (--source|-S)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.source" value="true" valueType="boolean"/>
-								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.allheaders.616461822" name="Display all headers (--all-headers|-x)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.allheaders" value="true" valueType="boolean"/>
-								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.demangle.1146271318" name="Demangle names (--demangle|-C)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.demangle" value="true" valueType="boolean"/>
-								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.linenumbers.1242922810" name="Display line numbers (--line-numbers|-l)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.linenumbers" value="true" valueType="boolean"/>
-								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.wide.876301703" name="Wide lines (--wide|-w)" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.createlisting.wide" value="true" valueType="boolean"/>
-							</tool>
-							<tool id="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.printsize.1112238656" name="GNU RISC-V Cross Print Size" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.tool.printsize">
-								<option id="ilg.gnumcueclipse.managedbuild.cross.riscv.option.printsize.format.483461408" name="Size format" superClass="ilg.gnumcueclipse.managedbuild.cross.riscv.option.printsize.format"/>
-							</tool>
-						</toolChain>
-					</folderInfo>
-				</configuration>
-			</storageModule>
-			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
-			<storageModule moduleId="ilg.gnumcueclipse.managedbuild.packs"/>
-		</cconfiguration>
-	</storageModule>
-	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-		<project id="demo_gpio.ilg.gnumcueclipse.managedbuild.cross.riscv.target.elf.431462479" name="Executable"/>
-	</storageModule>
-	<storageModule moduleId="scannerConfiguration">
-		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		<scannerConfigBuildInfo instanceId="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1992646408;ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.release.1992646408.;ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.1778523424;ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.input.1714150627">
-			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		</scannerConfigBuildInfo>
-		<scannerConfigBuildInfo instanceId="ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.debug.516870870;ilg.gnumcueclipse.managedbuild.cross.riscv.config.elf.debug.516870870.;ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.1632260763;ilg.gnumcueclipse.managedbuild.cross.riscv.tool.c.compiler.input.517786622">
-			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
-		</scannerConfigBuildInfo>
-	</storageModule>
-	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
-	<storageModule moduleId="refreshScope" versionNumber="2">
-		<configuration configurationName="Debug">
-			<resource resourceType="PROJECT" workspacePath="/demo_gpio"/>
-		</configuration>
-		<configuration configurationName="Release">
-			<resource resourceType="PROJECT" workspacePath="/demo_gpio"/>
-		</configuration>
-	</storageModule>
-	<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets">
-		<buildTargets>
-			<target name="all" path="" targetID="org.eclipse.cdt.build.MakeTargetBuilder">
-				<buildCommand>make</buildCommand>
-				<buildArguments/>
-				<buildTarget>all</buildTarget>
-				<stopOnError>true</stopOnError>
-				<useDefaultCommand>true</useDefaultCommand>
-				<runAllBuilders>true</runAllBuilders>
-			</target>
-		</buildTargets>
-	</storageModule>
-</cproject>

demo_gpio/.gitignore

@@ -1 +0,0 @@
-/Debug/

demo_gpio/.project

@@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<projectDescription>
-	<name>demo_gpio</name>
-	<comment></comment>
-	<projects>
-	</projects>
-	<buildSpec>
-		<buildCommand>
-			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
-			<triggers>clean,full,incremental,</triggers>
-			<arguments>
-			</arguments>
-		</buildCommand>
-		<buildCommand>
-			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
-			<triggers>full,incremental,</triggers>
-			<arguments>
-			</arguments>
-		</buildCommand>
-	</buildSpec>
-	<natures>
-		<nature>org.eclipse.cdt.core.cnature</nature>
-		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
-		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
-	</natures>
-</projectDescription>

demo_gpio/demo_gpio.c

@@ -1,255 +0,0 @@
-// See LICENSE for license details.
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "platform.h"
-#include <string.h>
-#include "plic/plic_driver.h"
-#include "encoding.h"
-#include <unistd.h>
-#include "stdatomic.h"
-
-void reset_demo (void);
-
-// Structures for registering different interrupt handlers
-// for different parts of the application.
-typedef void (*function_ptr_t) (void);
-
-void no_interrupt_handler (void) {};
-
-function_ptr_t g_ext_interrupt_handlers[PLIC_NUM_INTERRUPTS];
-
-
-// Instance data for the PLIC.
-
-plic_instance_t g_plic;
-
-
-/*Entry Point for PLIC Interrupt Handler*/
-void handle_m_ext_interrupt(){
-  plic_source int_num  = PLIC_claim_interrupt(&g_plic);
-  if ((int_num >=1 ) && (int_num < PLIC_NUM_INTERRUPTS)) {
-    g_ext_interrupt_handlers[int_num]();
-  }
-  else {
-    exit(1 + (uintptr_t) int_num);
-  }
-  PLIC_complete_interrupt(&g_plic, int_num);
-}
-
-
-/*Entry Point for Machine Timer Interrupt Handler*/
-void handle_m_time_interrupt(){
-
-  clear_csr(mie, MIP_MTIP);
-
-  // Reset the timer for 3s in the future.
-  // This also clears the existing timer interrupt.
-
-  volatile uint64_t * mtime       = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIME);
-  volatile uint64_t * mtimecmp    = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIMECMP);
-  uint64_t now = *mtime;
-  uint64_t then = now + 2 * RTC_FREQ;
-  *mtimecmp = then;
-
-  // read the current value of the LEDS and invert them.
-  uint32_t leds = GPIO_REG(GPIO_OUTPUT_VAL);
-
-  GPIO_REG(GPIO_OUTPUT_VAL) ^= ((0x1 << RED_LED_OFFSET)   |
-				(0x1 << GREEN_LED_OFFSET) |
-				(0x1 << BLUE_LED_OFFSET));
-  
-  // Re-enable the timer interrupt.
-  set_csr(mie, MIP_MTIP);
-
-}
-
-
-const char * instructions_msg = " \
-\n\
-                SIFIVE, INC.\n\
-\n\
-         5555555555555555555555555\n\
-        5555                   5555\n\
-       5555                     5555\n\
-      5555                       5555\n\
-     5555       5555555555555555555555\n\
-    5555       555555555555555555555555\n\
-   5555                             5555\n\
-  5555                               5555\n\
- 5555                                 5555\n\
-5555555555555555555555555555          55555\n\
- 55555           555555555           55555\n\
-   55555           55555           55555\n\
-     55555           5           55555\n\
-       55555                   55555\n\
-         55555               55555\n\
-           55555           55555\n\
-             55555       55555\n\
-               55555   55555\n\
-                 555555555\n\
-                   55555\n\
-                     5\n\
-\n\
-SiFive E-Series Software Development Kit 'demo_gpio' program.\n\
-Every 2 second, the Timer Interrupt will invert the LEDs.\n\
-(Arty Dev Kit Only): Press Buttons 0, 1, 2 to Set the LEDs.\n\
-Pin 19 (HiFive1) or A5 (Arty Dev Kit) is being bit-banged\n\
-for GPIO speed demonstration.\n\
-\n\
-";
-
-void print_instructions() {
-
-  write (STDOUT_FILENO, instructions_msg, strlen(instructions_msg));
-
-}
-
-#ifdef HAS_BOARD_BUTTONS
-void button_0_handler(void) {
-
-  // Red LED on
-  GPIO_REG(GPIO_OUTPUT_VAL) |= (0x1 << RED_LED_OFFSET);
-
-  // Clear the GPIO Pending interrupt by writing 1.
-  GPIO_REG(GPIO_RISE_IP) = (0x1 << BUTTON_0_OFFSET);
-
-};
-
-void button_1_handler(void) {
-
-  // Green LED On
-  GPIO_REG(GPIO_OUTPUT_VAL) |= (1 << GREEN_LED_OFFSET);
-
-  // Clear the GPIO Pending interrupt by writing 1.
-  GPIO_REG(GPIO_RISE_IP) = (0x1 << BUTTON_1_OFFSET);
-
-};
-
-
-void button_2_handler(void) {
-
-  // Blue LED On
-  GPIO_REG(GPIO_OUTPUT_VAL) |= (1 << BLUE_LED_OFFSET);
-
-  GPIO_REG(GPIO_RISE_IP) = (0x1 << BUTTON_2_OFFSET);
-
-};
-#endif
-
-void reset_demo (){
-
-  // Disable the machine & timer interrupts until setup is done.
-
-  clear_csr(mie, MIP_MEIP);
-  clear_csr(mie, MIP_MTIP);
-
-  for (int ii = 0; ii < PLIC_NUM_INTERRUPTS; ii ++){
-    g_ext_interrupt_handlers[ii] = no_interrupt_handler;
-  }
-
-#ifdef HAS_BOARD_BUTTONS
-  g_ext_interrupt_handlers[INT_DEVICE_BUTTON_0] = button_0_handler;
-  g_ext_interrupt_handlers[INT_DEVICE_BUTTON_1] = button_1_handler;
-  g_ext_interrupt_handlers[INT_DEVICE_BUTTON_2] = button_2_handler;
-#endif
-
-  print_instructions();
-
-#ifdef HAS_BOARD_BUTTONS
-
-  // Have to enable the interrupt both at the GPIO level,
-  // and at the PLIC level.
-  PLIC_enable_interrupt (&g_plic, INT_DEVICE_BUTTON_0);
-  PLIC_enable_interrupt (&g_plic, INT_DEVICE_BUTTON_1);
-  PLIC_enable_interrupt (&g_plic, INT_DEVICE_BUTTON_2);
-
-  // Priority must be set > 0 to trigger the interrupt.
-  PLIC_set_priority(&g_plic, INT_DEVICE_BUTTON_0, 1);
-  PLIC_set_priority(&g_plic, INT_DEVICE_BUTTON_1, 1);
-  PLIC_set_priority(&g_plic, INT_DEVICE_BUTTON_2, 1);
-
-  GPIO_REG(GPIO_RISE_IE) |= (1 << BUTTON_0_OFFSET);
-  GPIO_REG(GPIO_RISE_IE) |= (1 << BUTTON_1_OFFSET);
-  GPIO_REG(GPIO_RISE_IE) |= (1 << BUTTON_2_OFFSET);
-
-#endif
-
-    // Set the machine timer to go off in 3 seconds.
-    // The
-    volatile uint64_t * mtime       = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIME);
-    volatile uint64_t * mtimecmp    = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIMECMP);
-    uint64_t now = *mtime;
-    uint64_t then = now + 2*RTC_FREQ;
-    *mtimecmp = then;
-
-    // Enable the Machine-External bit in MIE
-    set_csr(mie, MIP_MEIP);
-
-    // Enable the Machine-Timer bit in MIE
-    set_csr(mie, MIP_MTIP);
-
-    // Enable interrupts in general.
-    set_csr(mstatus, MSTATUS_MIE);
-}
-
-int main(int argc, char **argv)
-{
-  // Set up the GPIOs such that the LED GPIO
-  // can be used as both Inputs and Outputs.
-  
-
-#ifdef HAS_BOARD_BUTTONS
-  GPIO_REG(GPIO_OUTPUT_EN)  &= ~((0x1 << BUTTON_0_OFFSET) | (0x1 << BUTTON_1_OFFSET) | (0x1 << BUTTON_2_OFFSET));
-  GPIO_REG(GPIO_PULLUP_EN)  &= ~((0x1 << BUTTON_0_OFFSET) | (0x1 << BUTTON_1_OFFSET) | (0x1 << BUTTON_2_OFFSET));
-  GPIO_REG(GPIO_INPUT_EN)   |=  ((0x1 << BUTTON_0_OFFSET) | (0x1 << BUTTON_1_OFFSET) | (0x1 << BUTTON_2_OFFSET));
-#endif
-
-  GPIO_REG(GPIO_INPUT_EN)    &= ~((0x1<< RED_LED_OFFSET) | (0x1<< GREEN_LED_OFFSET) | (0x1 << BLUE_LED_OFFSET)) ;
-  GPIO_REG(GPIO_OUTPUT_EN)   |=  ((0x1<< RED_LED_OFFSET)| (0x1<< GREEN_LED_OFFSET) | (0x1 << BLUE_LED_OFFSET)) ;
-  GPIO_REG(GPIO_OUTPUT_VAL)  |=   (0x1 << BLUE_LED_OFFSET) ;
-  GPIO_REG(GPIO_OUTPUT_VAL)  &=  ~((0x1<< RED_LED_OFFSET) | (0x1<< GREEN_LED_OFFSET)) ;
-
-  
-  // For Bit-banging with Atomics demo.
-  
-  uint32_t bitbang_mask = 0;
-#ifdef _SIFIVE_HIFIVE1_H
-  bitbang_mask = (1 << PIN_19_OFFSET);
-#else
-#ifdef _SIFIVE_COREPLEXIP_ARTY_H
-  bitbang_mask = (0x1 << JA_0_OFFSET);
-#endif
-#endif
-
-  GPIO_REG(GPIO_OUTPUT_EN) |= bitbang_mask;
-  
-  /**************************************************************************
-   * Set up the PLIC
-   *
-   *************************************************************************/
-  PLIC_init(&g_plic,
-	    PLIC_CTRL_ADDR,
-	    PLIC_NUM_INTERRUPTS,
-	    PLIC_NUM_PRIORITIES);
-
-  reset_demo();
-
-  /**************************************************************************
-   * Demonstrate fast GPIO bit-banging.
-   * One can bang it faster than this if you know
-   * the entire OUTPUT_VAL that you want to write, but 
-   * Atomics give a quick way to control a single bit.
-   *************************************************************************/
-  // For Bit-banging with Atomics demo.
-  uint32_t cnt=0;
-  while(cnt<200){
-	  asm volatile ("wfi");
-	  printf("Finished run#%u\n", ++cnt);
-	  for(size_t i=0; i<100; ++i)
-		  atomic_fetch_xor_explicit(&GPIO_REG(GPIO_OUTPUT_VAL), bitbang_mask, memory_order_relaxed);
-  }
-
-  return 0;
-
-}

demo_gpio/sifive-freedom-e300-hifive1.cfg

@@ -1,34 +0,0 @@
-adapter_khz     10000
-
-interface ftdi
-ftdi_device_desc "Dual RS232-HS"
-ftdi_vid_pid 0x0403 0x6010
-
-ftdi_layout_init 0x0008 0x001b
-ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
-
-#Reset Stretcher logic on FE310 is ~1 second long
-#This doesn't apply if you use
-# ftdi_set_signal, but still good to document
-#adapter_nsrst_delay 1500
-
-set _CHIPNAME riscv
-jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME riscv -chain-position $_TARGETNAME
-$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
-
-flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
-init
-#reset -- This type of reset is not implemented yet
-if {[ info exists pulse_srst]} {
-  ftdi_set_signal nSRST 0
-  ftdi_set_signal nSRST z
-  #Wait for the reset stretcher
-  #It will work without this, but
-  #will incur lots of delays for later commands.
-  sleep 1500
-}	
-halt
-flash protect 0 64 last off

dhrystone/.gitignore

@@ -1 +0,0 @@
-dhrystone

dhrystone/Makefile

@@ -1,25 +0,0 @@
-TARGET := dhrystone
-
-ASM_SRCS := 
-C_SRCS := dhry_stubs.c dhry_printf.c
-HEADERS := dhry.h
-
-DHRY_SRCS := dhry_1.c dhry_2.c
-DHRY_CFLAGS := -O2 -DTIME -DNO_INIT -fno-inline -fno-builtin-printf -Wno-implicit -march=rv32ima
-
-XLEN ?= 32
-CFLAGS := -g -Og -fno-common
-LDFLAGS := -g -Wl,--wrap=scanf -Wl,--wrap=printf -Wl,--wrap=exit
-
-DHRY_OBJS := $(patsubst %.c,%.o,$(DHRY_SRCS))
-LINK_OBJS := $(DHRY_OBJS)
-
-#BOARD = iss
-BOARD=freedom-e300-hifive1
-TOOL_DIR=/opt/shared/riscv/FreedomStudio/20180122/SiFive/riscv64-unknown-elf-gcc-20171231-x86_64-linux-centos6/bin
-
-BSP_BASE = bsp
-include $(BSP_BASE)/env/common.mk
-
-$(DHRY_OBJS): %.o: %.c $(HEADERS)
-	$(CC) $(CFLAGS) $(DHRY_CFLAGS) -c -o $@ $<

dhrystone/bsp/env/common.mk

@@ -1,60 +0,0 @@
-# See LICENSE for license details.
-
-ifndef _SIFIVE_MK_COMMON
-_SIFIVE_MK_COMMON := # defined
-
-.PHONY: all
-all: $(TARGET)
-
-include $(BSP_BASE)/libwrap/libwrap.mk
-
-BOARD ?= freedom-e300-hifive1
-ENV_DIR = $(BSP_BASE)/env
-PLATFORM_DIR = $(ENV_DIR)/$(BOARD)
-
-#TARGET_FLAVOR := -march=rv32imac -mabi=ilp32 -mcmodel=medany -msmall-data-limit=8 -x assembler-with-cpp
-TARGET_FLAVOR := -march=rv32imac -mabi=ilp32
-
-ASM_SRCS += $(ENV_DIR)/start.S
-ASM_SRCS += $(ENV_DIR)/entry.S
-C_SRCS += $(PLATFORM_DIR)/init.c
-
-LINKER_SCRIPT := $(PLATFORM_DIR)/link.lds
-
-INCLUDES += -I$(BSP_BASE)/include
-INCLUDES += -I$(BSP_BASE)/drivers/
-INCLUDES += -I$(ENV_DIR)
-INCLUDES += -I$(PLATFORM_DIR)
-
-TOOL_DIR ?= $(BSP_BASE)/../toolchain/bin
-
-CC := $(TOOL_DIR)/riscv64-unknown-elf-gcc ${TARGET_FLAVOR}
-AR := $(TOOL_DIR)/riscv64-unknown-elf-ar
-
-LDFLAGS += -T $(LINKER_SCRIPT) -nostartfiles
-LDFLAGS += -L$(ENV_DIR)
-
-ASM_OBJS := $(ASM_SRCS:.S=.o)
-C_OBJS := $(C_SRCS:.c=.o)
-
-LINK_OBJS += $(ASM_OBJS) $(C_OBJS)
-LINK_DEPS += $(LINKER_SCRIPT)
-
-CLEAN_OBJS += $(TARGET) $(LINK_OBJS)
-
-CFLAGS += -g
-
-$(TARGET): $(LINK_OBJS) $(LINK_DEPS)
-	$(CC) $(CFLAGS) $(INCLUDES) $(LINK_OBJS) -o $@ $(LDFLAGS)
-
-$(ASM_OBJS): %.o: %.S $(HEADERS)
-	$(CC) $(CFLAGS) $(INCLUDES) -c -o $@ $<
-
-$(C_OBJS): %.o: %.c $(HEADERS)
-	$(CC) $(CFLAGS) $(INCLUDES) -include sys/cdefs.h -c -o $@ $<
-
-.PHONY: clean
-clean:
-	rm -f $(CLEAN_OBJS)
-
-endif # _SIFIVE_MK_COMMON

dhrystone/bsp/env/entry.S

@@ -1,97 +0,0 @@
-// See LICENSE for license details
-
-#ifndef ENTRY_S
-#define ENTRY_S
-
-#include "encoding.h"
-#include "sifive/bits.h"
-
-  .section      .text.entry	
-  .align 2
-  .global trap_entry
-trap_entry:
-  addi sp, sp, -32*REGBYTES
-
-  STORE x1, 1*REGBYTES(sp)
-  STORE x2, 2*REGBYTES(sp)
-  STORE x3, 3*REGBYTES(sp)
-  STORE x4, 4*REGBYTES(sp)
-  STORE x5, 5*REGBYTES(sp)
-  STORE x6, 6*REGBYTES(sp)
-  STORE x7, 7*REGBYTES(sp)
-  STORE x8, 8*REGBYTES(sp)
-  STORE x9, 9*REGBYTES(sp)
-  STORE x10, 10*REGBYTES(sp)
-  STORE x11, 11*REGBYTES(sp)
-  STORE x12, 12*REGBYTES(sp)
-  STORE x13, 13*REGBYTES(sp)
-  STORE x14, 14*REGBYTES(sp)
-  STORE x15, 15*REGBYTES(sp)
-  STORE x16, 16*REGBYTES(sp)
-  STORE x17, 17*REGBYTES(sp)
-  STORE x18, 18*REGBYTES(sp)
-  STORE x19, 19*REGBYTES(sp)
-  STORE x20, 20*REGBYTES(sp)
-  STORE x21, 21*REGBYTES(sp)
-  STORE x22, 22*REGBYTES(sp)
-  STORE x23, 23*REGBYTES(sp)
-  STORE x24, 24*REGBYTES(sp)
-  STORE x25, 25*REGBYTES(sp)
-  STORE x26, 26*REGBYTES(sp)
-  STORE x27, 27*REGBYTES(sp)
-  STORE x28, 28*REGBYTES(sp)
-  STORE x29, 29*REGBYTES(sp)
-  STORE x30, 30*REGBYTES(sp)
-  STORE x31, 31*REGBYTES(sp)
-
-  csrr a0, mcause
-  csrr a1, mepc
-  mv a2, sp
-  call handle_trap
-  csrw mepc, a0
-
-  # Remain in M-mode after mret
-  li t0, MSTATUS_MPP
-  csrs mstatus, t0
-
-  LOAD x1, 1*REGBYTES(sp)
-  LOAD x2, 2*REGBYTES(sp)
-  LOAD x3, 3*REGBYTES(sp)
-  LOAD x4, 4*REGBYTES(sp)
-  LOAD x5, 5*REGBYTES(sp)
-  LOAD x6, 6*REGBYTES(sp)
-  LOAD x7, 7*REGBYTES(sp)
-  LOAD x8, 8*REGBYTES(sp)
-  LOAD x9, 9*REGBYTES(sp)
-  LOAD x10, 10*REGBYTES(sp)
-  LOAD x11, 11*REGBYTES(sp)
-  LOAD x12, 12*REGBYTES(sp)
-  LOAD x13, 13*REGBYTES(sp)
-  LOAD x14, 14*REGBYTES(sp)
-  LOAD x15, 15*REGBYTES(sp)
-  LOAD x16, 16*REGBYTES(sp)
-  LOAD x17, 17*REGBYTES(sp)
-  LOAD x18, 18*REGBYTES(sp)
-  LOAD x19, 19*REGBYTES(sp)
-  LOAD x20, 20*REGBYTES(sp)
-  LOAD x21, 21*REGBYTES(sp)
-  LOAD x22, 22*REGBYTES(sp)
-  LOAD x23, 23*REGBYTES(sp)
-  LOAD x24, 24*REGBYTES(sp)
-  LOAD x25, 25*REGBYTES(sp)
-  LOAD x26, 26*REGBYTES(sp)
-  LOAD x27, 27*REGBYTES(sp)
-  LOAD x28, 28*REGBYTES(sp)
-  LOAD x29, 29*REGBYTES(sp)
-  LOAD x30, 30*REGBYTES(sp)
-  LOAD x31, 31*REGBYTES(sp)
-
-  addi sp, sp, 32*REGBYTES
-  mret
-
-.weak handle_trap
-handle_trap:
-1:
-  j 1b
-	
-#endif

dhrystone/bsp/env/hifive1.h

@@ -1,81 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_HIFIVE1_H
-#define _SIFIVE_HIFIVE1_H
-
-#include <stdint.h>
-
-/****************************************************************************
- * GPIO Connections
- *****************************************************************************/
-
-// These are the GPIO bit offsets for the RGB LED on HiFive1 Board.
-// These are also mapped to RGB LEDs on the Freedom E300 Arty
-// FPGA
-// Dev Kit.
-
-#define RED_LED_OFFSET   22
-#define GREEN_LED_OFFSET 19
-#define BLUE_LED_OFFSET  21
-
-// These are the GPIO bit offsets for the differen digital pins
-// on the headers for both the HiFive1 Board and the Freedom E300 Arty FPGA Dev Kit.
-#define PIN_0_OFFSET 16
-#define PIN_1_OFFSET 17
-#define PIN_2_OFFSET 18
-#define PIN_3_OFFSET 19
-#define PIN_4_OFFSET 20
-#define PIN_5_OFFSET 21
-#define PIN_6_OFFSET 22
-#define PIN_7_OFFSET 23
-#define PIN_8_OFFSET 0
-#define PIN_9_OFFSET 1
-#define PIN_10_OFFSET 2
-#define PIN_11_OFFSET 3
-#define PIN_12_OFFSET 4
-#define PIN_13_OFFSET 5
-//#define PIN_14_OFFSET 8 //This pin is not connected on either board.
-#define PIN_15_OFFSET 9
-#define PIN_16_OFFSET 10
-#define PIN_17_OFFSET 11
-#define PIN_18_OFFSET 12
-#define PIN_19_OFFSET 13
-
-// These are *PIN* numbers, not
-// GPIO Offset Numbers.
-#define PIN_SPI1_SCK    (13u)
-#define PIN_SPI1_MISO   (12u)
-#define PIN_SPI1_MOSI   (11u)
-#define PIN_SPI1_SS0    (10u)
-#define PIN_SPI1_SS1    (14u) 
-#define PIN_SPI1_SS2    (15u)
-#define PIN_SPI1_SS3    (16u)
-
-#define SS_PIN_TO_CS_ID(x) \
-  ((x==PIN_SPI1_SS0 ? 0 :		 \
-    (x==PIN_SPI1_SS1 ? 1 :		 \
-     (x==PIN_SPI1_SS2 ? 2 :		 \
-      (x==PIN_SPI1_SS3 ? 3 :		 \
-       -1))))) 
-
-
-// These buttons are present only on the Freedom E300 Arty Dev Kit.
-#ifdef HAS_BOARD_BUTTONS
-#define BUTTON_0_OFFSET 15
-#define BUTTON_1_OFFSET 30
-#define BUTTON_2_OFFSET 31
-
-#define INT_DEVICE_BUTTON_0 (INT_GPIO_BASE + BUTTON_0_OFFSET)
-#define INT_DEVICE_BUTTON_1 (INT_GPIO_BASE + BUTTON_1_OFFSET)
-#define INT_DEVICE_BUTTON_2 (INT_GPIO_BASE + BUTTON_2_OFFSET)
-
-#endif
-
-#define HAS_HFXOSC 1
-#define HAS_LFROSC_BYPASS 1
-
-#define RTC_FREQ 32768
-
-void write_hex(int fd, uint32_t hex);
-
-#endif /* _SIFIVE_HIFIVE1_H */

dhrystone/bsp/include/sifive/devices/spi.h

@@ -1,80 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_SPI_H
-#define _SIFIVE_SPI_H
-
-/* Register offsets */
-
-#define SPI_REG_SCKDIV          0x00
-#define SPI_REG_SCKMODE         0x04
-#define SPI_REG_CSID            0x10
-#define SPI_REG_CSDEF           0x14
-#define SPI_REG_CSMODE          0x18
-
-#define SPI_REG_DCSSCK          0x28
-#define SPI_REG_DSCKCS          0x2a
-#define SPI_REG_DINTERCS        0x2c
-#define SPI_REG_DINTERXFR       0x2e
-
-#define SPI_REG_FMT             0x40
-#define SPI_REG_TXFIFO          0x48
-#define SPI_REG_RXFIFO          0x4c
-#define SPI_REG_TXCTRL          0x50
-#define SPI_REG_RXCTRL          0x54
-
-#define SPI_REG_FCTRL           0x60
-#define SPI_REG_FFMT            0x64
-
-#define SPI_REG_IE              0x70
-#define SPI_REG_IP              0x74
-
-/* Fields */
-
-#define SPI_SCK_POL             0x1
-#define SPI_SCK_PHA             0x2
-
-#define SPI_FMT_PROTO(x)        ((x) & 0x3)
-#define SPI_FMT_ENDIAN(x)       (((x) & 0x1) << 2)
-#define SPI_FMT_DIR(x)          (((x) & 0x1) << 3)
-#define SPI_FMT_LEN(x)          (((x) & 0xf) << 16)
-
-/* TXCTRL register */
-#define SPI_TXWM(x)             ((x) & 0xffff)
-/* RXCTRL register */
-#define SPI_RXWM(x)             ((x) & 0xffff)
-
-#define SPI_IP_TXWM             0x1
-#define SPI_IP_RXWM             0x2
-
-#define SPI_FCTRL_EN            0x1
-
-#define SPI_INSN_CMD_EN         0x1
-#define SPI_INSN_ADDR_LEN(x)    (((x) & 0x7) << 1)
-#define SPI_INSN_PAD_CNT(x)     (((x) & 0xf) << 4)
-#define SPI_INSN_CMD_PROTO(x)   (((x) & 0x3) << 8)
-#define SPI_INSN_ADDR_PROTO(x)  (((x) & 0x3) << 10)
-#define SPI_INSN_DATA_PROTO(x)  (((x) & 0x3) << 12)
-#define SPI_INSN_CMD_CODE(x)    (((x) & 0xff) << 16)
-#define SPI_INSN_PAD_CODE(x)    (((x) & 0xff) << 24)
-
-#define SPI_TXFIFO_FULL  (1 << 31)   
-#define SPI_RXFIFO_EMPTY (1 << 31)   
-
-/* Values */
-
-#define SPI_CSMODE_AUTO         0
-#define SPI_CSMODE_HOLD         2
-#define SPI_CSMODE_OFF          3
-
-#define SPI_DIR_RX              0
-#define SPI_DIR_TX              1
-
-#define SPI_PROTO_S             0
-#define SPI_PROTO_D             1
-#define SPI_PROTO_Q             2
-
-#define SPI_ENDIAN_MSB          0
-#define SPI_ENDIAN_LSB          1
-
-
-#endif /* _SIFIVE_SPI_H */

dhrystone/bsp/libwrap/libwrap.mk

@@ -1,54 +0,0 @@
-# See LICENSE for license details.
-
-ifndef _SIFIVE_MK_LIBWRAP
-_SIFIVE_MK_LIBWRAP := # defined
-
-LIBWRAP_DIR := $(dir $(lastword $(MAKEFILE_LIST)))
-LIBWRAP_DIR := $(LIBWRAP_DIR:/=)
-
-LIBWRAP_SRCS := \
-	stdlib/malloc.c \
-	sys/open.c \
-	sys/lseek.c \
-	sys/read.c \
-	sys/write.c \
-	sys/fstat.c \
-	sys/stat.c \
-	sys/close.c \
-	sys/link.c \
-	sys/unlink.c \
-	sys/execve.c \
-	sys/fork.c \
-	sys/getpid.c \
-	sys/kill.c \
-	sys/wait.c \
-	sys/isatty.c \
-	sys/times.c \
-	sys/sbrk.c \
-	sys/_exit.c \
-	misc/write_hex.c
-
-LIBWRAP_SRCS := $(foreach f,$(LIBWRAP_SRCS),$(LIBWRAP_DIR)/$(f))
-LIBWRAP_OBJS := $(LIBWRAP_SRCS:.c=.o)
-
-LIBWRAP_SYMS := malloc free \
-	open lseek read write fstat stat close link unlink \
-	execve fork getpid kill wait \
-	isatty times sbrk _exit
-
-LIBWRAP := libwrap.a
-
-LINK_DEPS += $(LIBWRAP)
-
-LDFLAGS += $(foreach s,$(LIBWRAP_SYMS),-Wl,--wrap=$(s))
-LDFLAGS += -L. -Wl,--start-group -lwrap -lc -Wl,--end-group
-
-CLEAN_OBJS += $(LIBWRAP_OBJS)
-
-$(LIBWRAP_OBJS): %.o: %.c $(HEADERS)
-	$(CC) $(CFLAGS) $(INCLUDES) -c -o $@ $<
-
-$(LIBWRAP): $(LIBWRAP_OBJS)
-	$(AR) rcs $@ $^
-
-endif # _SIFIVE_MK_LIBWRAP

dhrystone/bsp/libwrap/misc/write_hex.c

@@ -1,19 +0,0 @@
-/* See LICENSE of license details. */
-
-#include <stdint.h>
-#include <unistd.h>
-#include "platform.h"
-
-void write_hex(int fd, uint32_t hex)
-{
-  uint8_t ii;
-  uint8_t jj;
-  char towrite;
-  write(fd , "0x", 2);
-  for (ii = 8 ; ii > 0; ii--) {
-    jj = ii - 1;
-    uint8_t digit = ((hex & (0xF << (jj*4))) >> (jj*4));
-    towrite = digit < 0xA ? ('0' + digit) : ('A' +  (digit - 0xA));
-    write(fd, &towrite, 1);
-  }
-}

dhrystone/bsp/libwrap/sys/_exit.c

@@ -1,17 +0,0 @@
-/* See LICENSE of license details. */
-
-#include <unistd.h>
-#include "platform.h"
-
-void __wrap__exit(int code)
-{
-//volatile uint32_t* leds = (uint32_t*) (GPIO_BASE_ADDR + GPIO_OUT_OFFSET);
-  const char message[] = "\nProgam has exited with code:";
-//*leds = (~(code));
-
-  write(STDERR_FILENO, message, sizeof(message) - 1);
-  write_hex(STDERR_FILENO, code);
-  write(STDERR_FILENO, "\n", 1);
-
-  for (;;);
-}

dhrystone/dhry_printf.c

@@ -1,271 +0,0 @@
-/* The functions in this file are only meant to support Dhrystone on an
- * embedded RV32 system and are obviously incorrect in general. */
-
-#include <stdarg.h>
-#include <stddef.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <string.h>
-#include <unistd.h>
-
-#undef putchar
-int putchar(int ch)
-{
-  return write(1, &ch, 1) == 1 ? ch : -1;
-}
-
-static void sprintf_putch(int ch, void** data)
-{
-  char** pstr = (char**)data;
-  **pstr = ch;
-  (*pstr)++;
-}
-
-static unsigned long getuint(va_list *ap, int lflag)
-{
-  if (lflag)
-    return va_arg(*ap, unsigned long);
-  else
-    return va_arg(*ap, unsigned int);
-}
-
-static long getint(va_list *ap, int lflag)
-{
-  if (lflag)
-    return va_arg(*ap, long);
-  else
-    return va_arg(*ap, int);
-}
-
-static inline void printnum(void (*putch)(int, void**), void **putdat,
-                    unsigned long num, unsigned base, int width, int padc)
-{
-  unsigned digs[sizeof(num)*8];
-  int pos = 0;
-
-  while (1)
-  {
-    digs[pos++] = num % base;
-    if (num < base)
-      break;
-    num /= base;
-  }
-
-  while (width-- > pos)
-    putch(padc, putdat);
-
-  while (pos-- > 0)
-    putch(digs[pos] + (digs[pos] >= 10 ? 'a' - 10 : '0'), putdat);
-}
-
-static inline void print_double(void (*putch)(int, void**), void **putdat,
-                                double num, int width, int prec)
-{
-  union {
-    double d;
-    uint64_t u;
-  } u;
-  u.d = num;
-
-  if (u.u & (1ULL << 63)) {
-    putch('-', putdat);
-    u.u &= ~(1ULL << 63);
-  }
-
-  for (int i = 0; i < prec; i++)
-    u.d *= 10;
-
-  char buf[32], *pbuf = buf;
-  printnum(sprintf_putch, (void**)&pbuf, (unsigned long)u.d, 10, 0, 0);
-  if (prec > 0) {
-    for (int i = 0; i < prec; i++) {
-      pbuf[-i] = pbuf[-i-1];
-    }
-    pbuf[-prec] = '.';
-    pbuf++;
-  }
-
-  for (char* p = buf; p < pbuf; p++)
-    putch(*p, putdat);
-}
-
-static void vprintfmt(void (*putch)(int, void**), void **putdat, const char *fmt, va_list ap)
-{
-  register const char* p;
-  const char* last_fmt;
-  register int ch, err;
-  unsigned long num;
-  int base, lflag, width, precision, altflag;
-  char padc;
-
-  while (1) {
-    while ((ch = *(unsigned char *) fmt) != '%') {
-      if (ch == '\0')
-        return;
-      fmt++;
-      putch(ch, putdat);
-    }
-    fmt++;
-
-    // Process a %-escape sequence
-    last_fmt = fmt;
-    padc = ' ';
-    width = -1;
-    precision = -1;
-    lflag = 0;
-    altflag = 0;
-  reswitch:
-    switch (ch = *(unsigned char *) fmt++) {
-
-    // flag to pad on the right
-    case '-':
-      padc = '-';
-      goto reswitch;
-      
-    // flag to pad with 0's instead of spaces
-    case '0':
-      padc = '0';
-      goto reswitch;
-
-    // width field
-    case '1':
-    case '2':
-    case '3':
-    case '4':
-    case '5':
-    case '6':
-    case '7':
-    case '8':
-    case '9':
-      for (precision = 0; ; ++fmt) {
-        precision = precision * 10 + ch - '0';
-        ch = *fmt;
-        if (ch < '0' || ch > '9')
-          break;
-      }
-      goto process_precision;
-
-    case '*':
-      precision = va_arg(ap, int);
-      goto process_precision;
-
-    case '.':
-      if (width < 0)
-        width = 0;
-      goto reswitch;
-
-    case '#':
-      altflag = 1;
-      goto reswitch;
-
-    process_precision:
-      if (width < 0)
-        width = precision, precision = -1;
-      goto reswitch;
-
-    // long flag
-    case 'l':
-      if (lflag)
-        goto bad;
-      goto reswitch;
-
-    // character
-    case 'c':
-      putch(va_arg(ap, int), putdat);
-      break;
-
-    // double
-    case 'f':
-      print_double(putch, putdat, va_arg(ap, double), width, precision);
-      break;
-
-    // string
-    case 's':
-      if ((p = va_arg(ap, char *)) == NULL)
-        p = "(null)";
-      if (width > 0 && padc != '-')
-        for (width -= strnlen(p, precision); width > 0; width--)
-          putch(padc, putdat);
-      for (; (ch = *p) != '\0' && (precision < 0 || --precision >= 0); width--) {
-        putch(ch, putdat);
-        p++;
-      }
-      for (; width > 0; width--)
-        putch(' ', putdat);
-      break;
-
-    // (signed) decimal
-    case 'd':
-      num = getint(&ap, lflag);
-      if ((long) num < 0) {
-        putch('-', putdat);
-        num = -(long) num;
-      }
-      base = 10;
-      goto signed_number;
-
-    // unsigned decimal
-    case 'u':
-      base = 10;
-      goto unsigned_number;
-
-    // (unsigned) octal
-    case 'o':
-      // should do something with padding so it's always 3 octits
-      base = 8;
-      goto unsigned_number;
-
-    // pointer
-    case 'p':
-      lflag = 1;
-      putch('0', putdat);
-      putch('x', putdat);
-      /* fall through to 'x' */
-
-    // (unsigned) hexadecimal
-    case 'x':
-      base = 16;
-    unsigned_number:
-      num = getuint(&ap, lflag);
-    signed_number:
-      printnum(putch, putdat, num, base, width, padc);
-      break;
-
-    // escaped '%' character
-    case '%':
-      putch(ch, putdat);
-      break;
-      
-    // unrecognized escape sequence - just print it literally
-    default:
-    bad:
-      putch('%', putdat);
-      fmt = last_fmt;
-      break;
-    }
-  }
-}
-
-int __wrap_printf(const char* fmt, ...)
-{
-  va_list ap;
-  va_start(ap, fmt);
-
-  vprintfmt((void*)putchar, 0, fmt, ap);
-
-  va_end(ap);
-  return 0; // incorrect return value, but who cares, anyway?
-}
-
-int __wrap_sprintf(char* str, const char* fmt, ...)
-{
-  va_list ap;
-  char* str0 = str;
-  va_start(ap, fmt);
-
-  vprintfmt(sprintf_putch, (void**)&str, fmt, ap);
-  *str = 0;
-
-  va_end(ap);
-  return str - str0;
-}

fpga_spn/.project

@@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<projectDescription>
-	<name>fpga_spn</name>
-	<comment></comment>
-	<projects>
-		<project>bsp</project>
-	</projects>
-	<buildSpec>
-		<buildCommand>
-			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
-			<triggers>clean,full,incremental,</triggers>
-			<arguments>
-			</arguments>
-		</buildCommand>
-		<buildCommand>
-			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
-			<triggers>full,incremental,</triggers>
-			<arguments>
-			</arguments>
-		</buildCommand>
-	</buildSpec>
-	<natures>
-		<nature>org.eclipse.cdt.core.cnature</nature>
-		<nature>org.eclipse.cdt.core.ccnature</nature>
-		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
-		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
-	</natures>
-</projectDescription>

fpga_spn/Makefile

@@ -1,27 +0,0 @@
-
-TARGET    = raven_spn
-C_SRCS    = $(wildcard src/*.c)  $(BSP_BASE)/drivers/fe300prci/fe300prci_driver.c $(BSP_BASE)/drivers/plic/plic_driver.c
-CXX_SRCS  = $(wildcard src/*.cpp) 
-HEADERS   = $(wildcard src/*.h)
-CFLAGS    = -g -fno-builtin-printf -DUSE_PLIC -I./src
-CXXFLAGS  = -fno-use-cxa-atexit
-LDFLAGS  += -g -lstdc++ -fno-use-cxa-atexit -march=$(RISCV_ARCH) -mabi=$(RISCV_ABI) -mcmodel=medany
-
-
-BOARD=freedom-e300-hifive1
-LINK_TARGET=flash
-RISCV_ARCH=rv32imac
-RISCV_ABI=ilp32
-
-TOOL_DIR=/opt/shared/riscv/tools/Ubuntu/riscv64-unknown-elf-gcc-8.3.0-2020.04.1-x86_64-linux-ubuntu14/bin
-
-BSP_BASE = ./bsp
-include $(BSP_BASE)/env/common.mk
-
-.PHONY: all
-all: $(TARGET).dump
-
-$(TARGET).dump: $(TARGET)
-	$(TOOL_DIR)/$(TRIPLET)-objdump -d -S -C $< > $@
-
-	

fpga_spn/bsp/drivers/fe300prci/fe300prci_driver.c

@@ -1,252 +0,0 @@
-// See LICENSE file for license details
-
-#include "platform.h"
-
-#ifdef PRCI_CTRL_ADDR
-#include "fe300prci/fe300prci_driver.h"
-#include <unistd.h>
-
-#define rdmcycle(x)  {				       \
-    uint32_t lo, hi, hi2;			       \
-    __asm__ __volatile__ ("1:\n\t"		       \
-			  "csrr %0, mcycleh\n\t"       \
-			  "csrr %1, mcycle\n\t"	       \
-			  "csrr %2, mcycleh\n\t"		\
-			  "bne  %0, %2, 1b\n\t"			\
-			  : "=r" (hi), "=r" (lo), "=r" (hi2)) ;	\
-    *(x) = lo | ((uint64_t) hi << 32); 				\
-  }
-
-uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq)
-{
-
-  uint32_t start_mtime = CLINT_REG(CLINT_MTIME);
-  uint32_t end_mtime = start_mtime + mtime_ticks + 1;
-
-  // Make sure we won't get rollover.
-  while (end_mtime < start_mtime){
-    start_mtime = CLINT_REG(CLINT_MTIME);
-    end_mtime = start_mtime + mtime_ticks + 1;
-  }
-
-  // Don't start measuring until mtime edge.
-  uint32_t tmp = start_mtime;
-  do {
-    start_mtime = CLINT_REG(CLINT_MTIME);
-  } while (start_mtime == tmp);
-  
-  uint64_t start_mcycle;
-  rdmcycle(&start_mcycle);
-  
-  while (CLINT_REG(CLINT_MTIME) < end_mtime) ;
-  
-  uint64_t end_mcycle;
-  rdmcycle(&end_mcycle);
-  uint32_t difference = (uint32_t) (end_mcycle - start_mcycle);
-
-  uint64_t freq = ((uint64_t) difference * mtime_freq) / mtime_ticks;
-  return (uint32_t) freq & 0xFFFFFFFF;
-  
-}
- 
-
-void PRCI_use_hfrosc(int div, int trim)
-{
-  // Make sure the HFROSC is running at its default setting
-  // It is OK to change this even if we are running off of it.
-  
-  PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1));
-
-  while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0);
-  
-  PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1);
-}
-
-void PRCI_use_pll(int refsel, int bypass,
-			 int r, int f, int q, int finaldiv,
-			 int hfroscdiv, int hfrosctrim)
-{
-  // Ensure that we aren't running off the PLL before we mess with it.
-  if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) {
-    // Make sure the HFROSC is running at its default setting
-    PRCI_use_hfrosc(4, 16);
-  }
-  
-  // Set PLL Source to be HFXOSC if desired.
-  uint32_t config_value = 0;
-
-  config_value |= PLL_REFSEL(refsel);
-  
-  if (bypass) {
-    // Bypass
-    config_value |= PLL_BYPASS(1);
-
-    PRCI_REG(PRCI_PLLCFG) = config_value;
-
-    // If we don't have an HFXTAL, this doesn't really matter.
-    // Set our Final output divide to divide-by-1:
-    PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
-  } else {
-  
-    // To overclock, use the hfrosc
-    if (hfrosctrim >= 0 && hfroscdiv >= 0) {
-      PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
-    }
-    
-    // Set DIV Settings for PLL
-    
-    // (Legal values of f_REF are 6-48MHz)
-
-    // Set DIVR to divide-by-2 to get 8MHz frequency
-    // (legal values of f_R are 6-12 MHz)
-
-    config_value |= PLL_BYPASS(1);
-    config_value |= PLL_R(r);
-
-    // Set DIVF to get 512Mhz frequncy
-    // There is an implied multiply-by-2, 16Mhz.
-    // So need to write 32-1
-    // (legal values of f_F are 384-768 MHz)
-    config_value |= PLL_F(f);
-
-    // Set DIVQ to divide-by-2 to get 256 MHz frequency
-    // (legal values of f_Q are 50-400Mhz)
-    config_value |= PLL_Q(q);
-
-    // Set our Final output divide to divide-by-1:
-    if (finaldiv == 1){
-      PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
-    } else {
-      PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV(finaldiv-1));
-    }
-
-    PRCI_REG(PRCI_PLLCFG) = config_value;
-
-    // Un-Bypass the PLL.
-    PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1);
-
-    // Wait for PLL Lock
-    // Note that the Lock signal can be glitchy.
-    // Need to wait 100 us
-    // RTC is running at 32kHz.
-    // So wait 4 ticks of RTC.
-    uint32_t now = CLINT_REG(CLINT_MTIME);
-    while (CLINT_REG(CLINT_MTIME) - now < 4) ;
-    
-    // Now it is safe to check for PLL Lock
-    while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0);
-
-  }
-
-  // Switch over to PLL Clock source
-  PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1);
-
-  // If we're running off HFXOSC, turn off the HFROSC to
-  // save power.
-  if (refsel) {
-    PRCI_REG(PRCI_HFROSCCFG) &= ~ROSC_EN(1);
-  }
-  
-}
-
-void PRCI_use_default_clocks()
-{
-  // Turn off the LFROSC
-  AON_REG(AON_LFROSC) &= ~ROSC_EN(1);
-
-  // Use HFROSC
-  PRCI_use_hfrosc(4, 16);
-}
-
-void PRCI_use_hfxosc(uint32_t finaldiv)
-{
-  
-  PRCI_use_pll(1, // Use HFXTAL
-	       1, // Bypass = 1
-	       0, // PLL settings don't matter
-	       0, // PLL settings don't matter
-	       0, // PLL settings don't matter
-	       finaldiv,
-	       -1,
-	       -1);
-}
-
-// This is a generic function, which
-// doesn't span the entire range of HFROSC settings.
-// It only adjusts the trim, which can span a hundred MHz or so.
-// This function does not check the legality of the PLL settings
-// at all, and it is quite possible to configure invalid PLL settings
-// this way.
-// It returns the actual measured CPU frequency.
-
-uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target )
-{
-
-  uint32_t hfrosctrim = 0;
-  uint32_t hfroscdiv = 4;
-  uint32_t prev_trim = 0;
-
-  // In this function we use PLL settings which
-  // will give us a 32x multiplier from the output
-  // of the HFROSC source to the output of the
-  // PLL. We first measure our HFROSC to get the
-  // right trim, then finally use it as the PLL source.
-  // We should really check here that the f_cpu
-  // requested is something in the limit of the PLL. For
-  // now that is up to the user.
-
-  // This will undershoot for frequencies not divisible by 16.
-  uint32_t desired_hfrosc_freq = (f_cpu/ 16);
-
-  PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
-  
-  // Ignore the first run (for icache reasons)
-  uint32_t cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
-
-  cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
-  uint32_t prev_freq = cpu_freq;
-  
-  while ((cpu_freq < desired_hfrosc_freq) && (hfrosctrim < 0x1F)){
-    prev_trim = hfrosctrim;
-    prev_freq = cpu_freq;
-    hfrosctrim ++;
-    PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
-    cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
-  } 
-
-  // We couldn't go low enough
-  if (prev_freq > desired_hfrosc_freq){
-    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
-    cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ);
-    return cpu_freq;
-  }
-  
-  // We couldn't go high enough
-  if (cpu_freq < desired_hfrosc_freq){
-    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
-    cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ);
-    return cpu_freq;
-  }
-
-  // Check for over/undershoot
-  switch(target) {
-  case(PRCI_FREQ_CLOSEST):
-    if ((desired_hfrosc_freq - prev_freq) < (cpu_freq - desired_hfrosc_freq)) {
-      PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
-    } else {
-      PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, hfrosctrim);
-    }
-    break;
-  case(PRCI_FREQ_UNDERSHOOT):
-    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
-    break;
-  default:
-    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, hfrosctrim);
-  }
-
-  cpu_freq =  PRCI_measure_mcycle_freq(1000, RTC_FREQ);
-  return cpu_freq;
-
-}
-
-#endif

fpga_spn/bsp/drivers/fe300prci/fe300prci_driver.h

@@ -1,79 +0,0 @@
-// See LICENSE file for license details
-
-#ifndef _FE300PRCI_DRIVER_H_
-#define _FE300PRCI_DRIVER_H_
-
-__BEGIN_DECLS
-
-#include <unistd.h>
-
-typedef enum prci_freq_target {
-  
-  PRCI_FREQ_OVERSHOOT,
-  PRCI_FREQ_CLOSEST,
-  PRCI_FREQ_UNDERSHOOT
-
-} PRCI_freq_target;
-
-/* Measure and return the approximate frequency of the 
- * CPU, as given by measuring the mcycle counter against 
- * the mtime ticks.
- */
-uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq);
-
-/* Safely switch over to the HFROSC using the given div
- * and trim settings.
- */
-void PRCI_use_hfrosc(int div, int trim);
-
-/* Safely switch over to the 16MHz HFXOSC,
- * applying the finaldiv clock divider (1 is the lowest
- * legal value).
- */
-void PRCI_use_hfxosc(uint32_t finaldiv);
-
-/* Safely switch over to the PLL using the given
- * settings.
- * 
- * Note that not all combinations of the inputs are actually
- * legal, and this function does not check for their
- * legality ("safely" means that this function won't turn off
- * or glitch the clock the CPU is actually running off, but
- * doesn't protect against you making it too fast or slow.)
- */
-
-void PRCI_use_pll(int refsel, int bypass,
-			 int r, int f, int q, int finaldiv,
-			 int hfroscdiv, int hfrosctrim);
-
-/* Use the default clocks configured at reset.
- * This is ~16Mhz HFROSC and turns off the LFROSC
- * (on the current FE310 Dev Platforms, an external LFROSC is 
- * used as it is more power efficient).
- */
-void PRCI_use_default_clocks();
-
-/* This routine will adjust the HFROSC trim
- * while using HFROSC as the clock source, 
- * measure the resulting frequency, then
- * use it as the PLL clock source, 
- * in an attempt to get over, under, or close to the 
- * requested frequency. It returns the actual measured 
- * frequency. 
- *
- * Note that the requested frequency must be within the 
- * range supported by the PLL so not all values are 
- * achievable with this function, and not all 
- * are guaranteed to actually work. The PLL
- * is rated higher than the hardware.
- * 
- * There is no check on the desired f_cpu frequency, it
- * is up to the user to specify something reasonable.
- */
-
-uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target);
-
-__END_DECLS
-
-#endif
-  

fpga_spn/bsp/drivers/plic/plic_driver.c

@@ -1,122 +0,0 @@
-// See LICENSE for license details.
-
-#include "sifive/devices/plic.h"
-#include "plic/plic_driver.h"
-#include "platform.h"
-#include "encoding.h"
-#include <string.h>
-
-
-// Note that there are no assertions or bounds checking on these
-// parameter values.
-
-void volatile_memzero(uint8_t * base, unsigned int size)
-{
-  volatile uint8_t * ptr;
-  for (ptr = base; ptr < (base + size); ptr++){
-    *ptr = 0;
-  }
-}
-
-void PLIC_init (
-                plic_instance_t * this_plic,
-                uintptr_t         base_addr,
-                uint32_t num_sources,
-                uint32_t num_priorities,
-				uint32_t target_hartid
-                )
-{
-  
-  this_plic->base_addr = base_addr;
-  this_plic->num_sources = num_sources;
-  this_plic->num_priorities = num_priorities;
-  this_plic->target_hartid = target_hartid;
-  
-  // Disable all interrupts (don't assume that these registers are reset).
-  volatile_memzero((uint8_t*) (this_plic->base_addr +
-                               PLIC_ENABLE_OFFSET +
-                               (this_plic->target_hartid << PLIC_ENABLE_SHIFT_PER_TARGET)),
-                   (num_sources + 8) / 8);
-  
-  // Set all priorities to 0 (equal priority -- don't assume that these are reset).
-  volatile_memzero ((uint8_t *)(this_plic->base_addr +
-                                PLIC_PRIORITY_OFFSET),
-                    (num_sources + 1) << PLIC_PRIORITY_SHIFT_PER_SOURCE);
-
-  // Set the threshold to 0.
-  volatile plic_threshold* threshold = (plic_threshold*)
-    (this_plic->base_addr +
-     PLIC_THRESHOLD_OFFSET +
-     (this_plic->target_hartid << PLIC_THRESHOLD_SHIFT_PER_TARGET));
-
-  *threshold = 0;
-  
-}
-
-void PLIC_set_threshold (plic_instance_t * this_plic,
-			 plic_threshold threshold){
-
-  volatile plic_threshold* threshold_ptr = (plic_threshold*) (this_plic->base_addr +
-                                                              PLIC_THRESHOLD_OFFSET +
-                                                              (this_plic->target_hartid << PLIC_THRESHOLD_SHIFT_PER_TARGET));
-
-  *threshold_ptr = threshold;
-
-}
-  
-
-void PLIC_enable_interrupt (plic_instance_t * this_plic, plic_source source){
-
-  volatile uint8_t * current_ptr = (volatile uint8_t *)(this_plic->base_addr +
-                                                        PLIC_ENABLE_OFFSET +
-                                                        (this_plic->target_hartid << PLIC_ENABLE_SHIFT_PER_TARGET) +
-                                                        (source >> 3));
-  uint8_t current = *current_ptr;
-  current = current | ( 1 << (source & 0x7));
-  *current_ptr = current;
-
-}
-
-void PLIC_disable_interrupt (plic_instance_t * this_plic, plic_source source){
-  
-  volatile uint8_t * current_ptr = (volatile uint8_t *) (this_plic->base_addr +
-                                                         PLIC_ENABLE_OFFSET +
-                                                         (this_plic->target_hartid << PLIC_ENABLE_SHIFT_PER_TARGET) +
-                                                         (source >> 3));
-  uint8_t current = *current_ptr;
-  current = current & ~(( 1 << (source & 0x7)));
-  *current_ptr = current;
-  
-}
-
-void PLIC_set_priority (plic_instance_t * this_plic, plic_source source, plic_priority priority){
-
-  if (this_plic->num_priorities > 0) {
-    volatile plic_priority * priority_ptr = (volatile plic_priority *)
-      (this_plic->base_addr +
-       PLIC_PRIORITY_OFFSET +
-       (source << PLIC_PRIORITY_SHIFT_PER_SOURCE));
-    *priority_ptr = priority;
-  }
-}
-
-plic_source PLIC_claim_interrupt(plic_instance_t * this_plic){
-  
-  volatile plic_source * claim_addr = (volatile plic_source * )
-    (this_plic->base_addr +
-     PLIC_CLAIM_OFFSET +
-     (this_plic->target_hartid << PLIC_CLAIM_SHIFT_PER_TARGET));
-
-  return  *claim_addr;
-  
-}
-
-void PLIC_complete_interrupt(plic_instance_t * this_plic, plic_source source){
-  
-  volatile plic_source * claim_addr = (volatile plic_source *) (this_plic->base_addr +
-                                                                PLIC_CLAIM_OFFSET +
-                                                                (this_plic->target_hartid << PLIC_CLAIM_SHIFT_PER_TARGET));
-  *claim_addr = source;
-  
-}
-

fpga_spn/bsp/drivers/plic/plic_driver.h

@@ -1,52 +0,0 @@
-// See LICENSE file for licence details
-
-#ifndef PLIC_DRIVER_H
-#define PLIC_DRIVER_H
-
-
-__BEGIN_DECLS
-
-#include "platform.h"
-
-typedef struct __plic_instance_t
-{
-  uintptr_t base_addr;
-
-  uint32_t num_sources;
-  uint32_t num_priorities;
-  uint32_t target_hartid;
-} plic_instance_t;
-
-typedef uint32_t plic_source;
-typedef uint32_t plic_priority;
-typedef uint32_t plic_threshold;
-
-void PLIC_init (
-                plic_instance_t * this_plic,
-                uintptr_t         base_addr,
-                uint32_t num_sources,
-                uint32_t num_priorities,
-				uint32_t target_hartid
-                );
-
-void PLIC_set_threshold (plic_instance_t * this_plic,
-			 plic_threshold threshold);
-  
-void PLIC_enable_interrupt (plic_instance_t * this_plic,
-			    plic_source source);
-
-void PLIC_disable_interrupt (plic_instance_t * this_plic,
-			     plic_source source);
-  
-void PLIC_set_priority (plic_instance_t * this_plic,
-			plic_source source,
-			plic_priority priority);
-
-plic_source PLIC_claim_interrupt(plic_instance_t * this_plic);
-
-void PLIC_complete_interrupt(plic_instance_t * this_plic,
-			     plic_source source);
-
-__END_DECLS
-
-#endif

fpga_spn/bsp/env/freedom-e300-hifive1/flash.lds

@@ -1,166 +0,0 @@
-OUTPUT_ARCH( "riscv" )
-
-ENTRY( _start )
-
-MEMORY
-{
-  flash (rxai!w) : ORIGIN = 0x20400000, LENGTH = 512M
-  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 512K
-}
-
-PHDRS
-{
-  flash PT_LOAD;
-  ram_init PT_LOAD;
-  ram PT_NULL;
-}
-
-SECTIONS
-{
-  __stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
-
-  .init           :
-  {
-    KEEP (*(SORT_NONE(.init)))
-  } >flash AT>flash :flash
-
-  .text           :
-  {
-    *(.text.unlikely .text.unlikely.*)
-    *(.text.startup .text.startup.*)
-    *(.text .text.*)
-    *(.gnu.linkonce.t.*)
-  } >flash AT>flash :flash
-
-  .fini           :
-  {
-    KEEP (*(SORT_NONE(.fini)))
-  } >flash AT>flash :flash
-
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-
-  .rodata         :
-  {
-    *(.rdata)
-    *(.rodata .rodata.*)
-    *(.gnu.linkonce.r.*)
-  } >flash AT>flash :flash
-
-  . = ALIGN(4);
-
-  .preinit_array  :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } >flash AT>flash :flash
-
-  .init_array     :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
-    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } >flash AT>flash :flash
-
-  .fini_array     :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
-    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } >flash AT>flash :flash
-
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } >flash AT>flash :flash
-
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } >flash AT>flash :flash
-
-  .except :
-  {
-  	*(.gcc_except_table.*)
-  } >flash AT>flash :flash
-  
-  .lalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data_lma = . );
-  } >flash AT>flash :flash
-
-  .dalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data = . );
-  } >ram AT>flash :ram_init
-
-  .data          :
-  {
-    *(.data .data.*)
-    *(.gnu.linkonce.d.*)
-    . = ALIGN(8);
-    PROVIDE( __global_pointer$ = . + 0x800 );
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-    . = ALIGN(8);
-    *(.srodata.cst16)
-    *(.srodata.cst8)
-    *(.srodata.cst4)
-    *(.srodata.cst2)
-    *(.srodata .srodata.*)
-  } >ram AT>flash :ram_init
-
-  . = ALIGN(4);
-  PROVIDE( _edata = . );
-  PROVIDE( edata = . );
-
-  PROVIDE( _fbss = . );
-  PROVIDE( __bss_start = . );
-  .bss            :
-  {
-    *(.sbss*)
-    *(.gnu.linkonce.sb.*)
-    *(.bss .bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN(4);
-  } >ram AT>ram :ram
-
-  . = ALIGN(8);
-  PROVIDE( _end = . );
-  PROVIDE( end = . );
-
-  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
-  {
-    PROVIDE( _heap_end = . );
-    . = __stack_size;
-    PROVIDE( _sp = . );
-  } >ram AT>ram :ram
-}

fpga_spn/bsp/env/freedom-e300-hifive1/init.c

@@ -1,238 +0,0 @@
-#include <stdint.h>
-#include <stdio.h>
-#include <unistd.h>
-
-#include "platform.h"
-#include "encoding.h"
-
-extern int main(int argc, char** argv);
-extern void trap_entry();
-
-static unsigned long mtime_lo(void)
-{
-  return *(volatile unsigned long *)(CLINT_CTRL_ADDR + CLINT_MTIME);
-}
-
-#ifdef __riscv32
-
-static uint32_t mtime_hi(void)
-{
-  return *(volatile uint32_t *)(CLINT_CTRL_ADDR + CLINT_MTIME + 4);
-}
-
-uint64_t get_timer_value()
-{
-  while (1) {
-    uint32_t hi = mtime_hi();
-    uint32_t lo = mtime_lo();
-    if (hi == mtime_hi())
-      return ((uint64_t)hi << 32) | lo;
-  }
-}
-
-#else /* __riscv32 */
-
-uint64_t get_timer_value()
-{
-  return mtime_lo();
-}
-
-#endif
-
-unsigned long get_timer_freq()
-{
-  return 32768;
-}
-
-static void use_hfrosc(int div, int trim)
-{
-  // Make sure the HFROSC is running at its default setting
-  PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1));
-  while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0) ;
-  PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1);
-}
-
-static void use_pll(int refsel, int bypass, int r, int f, int q)
-{
-  // Ensure that we aren't running off the PLL before we mess with it.
-  if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) {
-    // Make sure the HFROSC is running at its default setting
-    use_hfrosc(4, 16);
-  }
-
-  // Set PLL Source to be HFXOSC if available.
-  uint32_t config_value = 0;
-
-  config_value |= PLL_REFSEL(refsel);
-
-  if (bypass) {
-    // Bypass
-    config_value |= PLL_BYPASS(1);
-
-    PRCI_REG(PRCI_PLLCFG) = config_value;
-
-    // If we don't have an HFXTAL, this doesn't really matter.
-    // Set our Final output divide to divide-by-1:
-    PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
-  } else {
-    // In case we are executing from QSPI,
-    // (which is quite likely) we need to
-    // set the QSPI clock divider appropriately
-    // before boosting the clock frequency.
-
-    // Div = f_sck/2
-    SPI0_REG(SPI_REG_SCKDIV) = 8;
-
-    // Set DIV Settings for PLL
-    // Both HFROSC and HFXOSC are modeled as ideal
-    // 16MHz sources (assuming dividers are set properly for
-    // HFROSC).
-    // (Legal values of f_REF are 6-48MHz)
-
-    // Set DIVR to divide-by-2 to get 8MHz frequency
-    // (legal values of f_R are 6-12 MHz)
-
-    config_value |= PLL_BYPASS(1);
-    config_value |= PLL_R(r);
-
-    // Set DIVF to get 512Mhz frequncy
-    // There is an implied multiply-by-2, 16Mhz.
-    // So need to write 32-1
-    // (legal values of f_F are 384-768 MHz)
-    config_value |= PLL_F(f);
-
-    // Set DIVQ to divide-by-2 to get 256 MHz frequency
-    // (legal values of f_Q are 50-400Mhz)
-    config_value |= PLL_Q(q);
-
-    // Set our Final output divide to divide-by-1:
-    PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
-
-    PRCI_REG(PRCI_PLLCFG) = config_value;
-
-    // Un-Bypass the PLL.
-    PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1);
-
-    // Wait for PLL Lock
-    // Note that the Lock signal can be glitchy.
-    // Need to wait 100 us
-    // RTC is running at 32kHz.
-    // So wait 4 ticks of RTC.
-    uint32_t now = mtime_lo();
-    while (mtime_lo() - now < 4) ;
-
-    // Now it is safe to check for PLL Lock
-    while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0) ;
-  }
-
-  // Switch over to PLL Clock source
-  PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1);
-}
-
-static void use_default_clocks()
-{
-  // Turn off the LFROSC
-  AON_REG(AON_LFROSC) &= ~ROSC_EN(1);
-
-  // Use HFROSC
-  use_hfrosc(4, 16);
-}
-
-static unsigned long __attribute__((noinline)) measure_cpu_freq(size_t n)
-{
-  unsigned long start_mtime, delta_mtime;
-  unsigned long mtime_freq = get_timer_freq();
-
-  // Don't start measuruing until we see an mtime tick
-  unsigned long tmp = mtime_lo();
-  do {
-    start_mtime = mtime_lo();
-  } while (start_mtime == tmp);
-
-  unsigned long start_mcycle = read_csr(mcycle);
-
-  do {
-    delta_mtime = mtime_lo() - start_mtime;
-  } while (delta_mtime < n);
-
-  unsigned long delta_mcycle = read_csr(mcycle) - start_mcycle;
-
-  return (delta_mcycle / delta_mtime) * mtime_freq
-         + ((delta_mcycle % delta_mtime) * mtime_freq) / delta_mtime;
-}
-
-unsigned long get_cpu_freq()
-{
-  static uint32_t cpu_freq;
-
-  if (!cpu_freq) {
-    // warm up I$
-    measure_cpu_freq(1);
-    // measure for real
-    cpu_freq = measure_cpu_freq(10);
-  }
-
-  return cpu_freq;
-}
-
-static void uart_init(size_t baud_rate)
-{
-  GPIO_REG(GPIO_IOF_SEL) &= ~IOF0_UART0_MASK;
-  GPIO_REG(GPIO_IOF_EN) |= IOF0_UART0_MASK;
-  UART0_REG(UART_REG_DIV) = get_cpu_freq() / baud_rate - 1;
-  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
-}
-
-
-
-#ifdef USE_PLIC
-extern void handle_m_ext_interrupt();
-#endif
-
-#ifdef USE_M_TIME
-extern void handle_m_time_interrupt();
-#endif
-
-uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
-{
-  if (0){
-#ifdef USE_PLIC
-    // External Machine-Level interrupt from PLIC
-  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
-    handle_m_ext_interrupt();
-#endif
-#ifdef USE_M_TIME
-    // External Machine-Level interrupt from PLIC
-  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
-    handle_m_time_interrupt();
-#endif
-  }
-  else {
-    write(1, "trap\n", 5);
-    _exit(1 + mcause);
-  }
-  return epc;
-}
-
-void _init()
-{
-  
-  #ifndef NO_INIT
-  use_default_clocks();
-  use_pll(0, 0, 1, 31, 1);
-  uart_init(115200);
-
-  printf("core freq at %d Hz\n", get_cpu_freq());
-
-  write_csr(mtvec, &trap_entry);
-  if (read_csr(misa) & (1 << ('F' - 'A'))) { // if F extension is present
-    write_csr(mstatus, MSTATUS_FS); // allow FPU instructions without trapping
-    write_csr(fcsr, 0); // initialize rounding mode, undefined at reset
-  }
-  #endif
-  
-}
-
-void _fini()
-{
-}

fpga_spn/bsp/env/freedom-e300-hifive1/openocd.cfg

@@ -1,34 +0,0 @@
-adapter_khz     10000
-
-interface ftdi
-ftdi_device_desc "Dual RS232-HS"
-ftdi_vid_pid 0x0403 0x6010
-
-ftdi_layout_init 0x0008 0x001b
-ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
-
-#Reset Stretcher logic on FE310 is ~1 second long
-#This doesn't apply if you use
-# ftdi_set_signal, but still good to document
-#adapter_nsrst_delay 1500
-
-set _CHIPNAME riscv
-jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME riscv -chain-position $_TARGETNAME
-$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
-
-flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
-init
-#reset -- This type of reset is not implemented yet
-if {[ info exists pulse_srst]} {
-  ftdi_set_signal nSRST 0
-  ftdi_set_signal nSRST z
-  #Wait for the reset stretcher
-  #It will work without this, but
-  #will incur lots of delays for later commands.
-  sleep 1500
-}	
-halt
-#flash protect 0 64 last off

fpga_spn/bsp/env/freedom-e300-hifive1/platform.h

@@ -1,133 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_PLATFORM_H
-#define _SIFIVE_PLATFORM_H
-
-// Some things missing from the official encoding.h
-#define MCAUSE_INT         0x80000000
-#define MCAUSE_CAUSE       0x7FFFFFFF
-
-#include "sifive/const.h"
-#include "sifive/devices/aon.h"
-#include "sifive/devices/clint.h"
-#include "sifive/devices/gpio.h"
-#include "sifive/devices/otp.h"
-#include "sifive/devices/plic.h"
-#include "sifive/devices/prci.h"
-#include "sifive/devices/pwm.h"
-#include "sifive/devices/spi.h"
-#include "sifive/devices/uart.h"
-
-/****************************************************************************
- * Platform definitions
- *****************************************************************************/
-
-// Memory map
-#define MASKROM_MEM_ADDR _AC(0x00001000,UL)
-#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
-#define OTP_MEM_ADDR _AC(0x00020000,UL)
-#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
-#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
-#define AON_CTRL_ADDR _AC(0x10000000,UL)
-#define PRCI_CTRL_ADDR _AC(0x10008000,UL)
-#define OTP_CTRL_ADDR _AC(0x10010000,UL)
-#define GPIO_CTRL_ADDR _AC(0x10012000,UL)
-#define UART0_CTRL_ADDR _AC(0x10013000,UL)
-#define SPI0_CTRL_ADDR _AC(0x10014000,UL)
-#define PWM0_CTRL_ADDR _AC(0x10015000,UL)
-#define UART1_CTRL_ADDR _AC(0x10023000,UL)
-#define SPI1_CTRL_ADDR _AC(0x10024000,UL)
-#define PWM1_CTRL_ADDR _AC(0x10025000,UL)
-#define SPI2_CTRL_ADDR _AC(0x10034000,UL)
-#define PWM2_CTRL_ADDR _AC(0x10035000,UL)
-#define SPI0_MEM_ADDR _AC(0x20000000,UL)
-#define MEM_CTRL_ADDR _AC(0x80000000,UL)
-
-// IOF masks
-#define IOF0_SPI1_MASK          _AC(0x000007FC,UL)
-#define SPI11_NUM_SS     (4)
-#define IOF_SPI1_SS0          (2u)
-#define IOF_SPI1_SS1          (8u)
-#define IOF_SPI1_SS2          (9u)
-#define IOF_SPI1_SS3          (10u)
-#define IOF_SPI1_MOSI         (3u)
-#define IOF_SPI1_MISO         (4u)
-#define IOF_SPI1_SCK          (5u)
-#define IOF_SPI1_DQ0          (3u)
-#define IOF_SPI1_DQ1          (4u)
-#define IOF_SPI1_DQ2          (6u)
-#define IOF_SPI1_DQ3          (7u)
-
-#define IOF0_SPI2_MASK          _AC(0xFC000000,UL)
-#define SPI2_NUM_SS       (1)
-#define IOF_SPI2_SS0          (26u)
-#define IOF_SPI2_MOSI         (27u)
-#define IOF_SPI2_MISO         (28u)
-#define IOF_SPI2_SCK          (29u)
-#define IOF_SPI2_DQ0          (27u)
-#define IOF_SPI2_DQ1          (28u)
-#define IOF_SPI2_DQ2          (30u)
-#define IOF_SPI2_DQ3          (31u)
-
-//#define IOF0_I2C_MASK          _AC(0x00003000,UL)
-
-#define IOF0_UART0_MASK         _AC(0x00030000, UL)
-#define IOF_UART0_RX   (16u)
-#define IOF_UART0_TX   (17u)
-
-#define IOF0_UART1_MASK         _AC(0x03000000, UL)
-#define IOF_UART1_RX (24u)
-#define IOF_UART1_TX (25u)
-
-#define IOF1_PWM0_MASK          _AC(0x0000000F, UL)
-#define IOF1_PWM1_MASK          _AC(0x00780000, UL)
-#define IOF1_PWM2_MASK          _AC(0x00003C00, UL)
-
-// Interrupt numbers
-#define INT_RESERVED 0
-#define INT_WDOGCMP 1
-#define INT_RTCCMP 2
-#define INT_UART0_BASE 3
-#define INT_UART1_BASE 4
-#define INT_SPI0_BASE 5
-#define INT_SPI1_BASE 6
-#define INT_SPI2_BASE 7
-#define INT_GPIO_BASE 8
-#define INT_PWM0_BASE 40
-#define INT_PWM1_BASE 44
-#define INT_PWM2_BASE 48
-
-// Helper functions
-#define _REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
-#define _REG32P(p, i) ((volatile uint32_t *) ((p) + (i)))
-#define AON_REG(offset) _REG32(AON_CTRL_ADDR, offset)
-#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
-#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
-#define OTP_REG(offset)  _REG32(OTP_CTRL_ADDR, offset)
-#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
-#define PRCI_REG(offset) _REG32(PRCI_CTRL_ADDR, offset)
-#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
-#define PWM1_REG(offset) _REG32(PWM1_CTRL_ADDR, offset)
-#define PWM2_REG(offset) _REG32(PWM2_CTRL_ADDR, offset)
-#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
-#define SPI1_REG(offset) _REG32(SPI1_CTRL_ADDR, offset)
-#define SPI2_REG(offset) _REG32(SPI2_CTRL_ADDR, offset)
-#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
-#define UART1_REG(offset) _REG32(UART1_CTRL_ADDR, offset)
-
-// Misc
-
-#include <stdint.h>
-
-#define NUM_GPIO 32
-
-#define PLIC_NUM_INTERRUPTS 52
-#define PLIC_NUM_PRIORITIES 7
-
-#include "hifive1.h"
-
-unsigned long get_cpu_freq(void);
-unsigned long get_timer_freq(void);
-uint64_t get_timer_value(void);
-
-#endif /* _SIFIVE_PLATFORM_H */

fpga_spn/bsp/env/hifive1.h

@@ -1,81 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_HIFIVE1_H
-#define _SIFIVE_HIFIVE1_H
-
-#include <stdint.h>
-
-/****************************************************************************
- * GPIO Connections
- *****************************************************************************/
-
-// These are the GPIO bit offsets for the RGB LED on HiFive1 Board.
-// These are also mapped to RGB LEDs on the Freedom E300 Arty
-// FPGA
-// Dev Kit.
-
-#define RED_LED_OFFSET   22
-#define GREEN_LED_OFFSET 19
-#define BLUE_LED_OFFSET  21
-
-// These are the GPIO bit offsets for the differen digital pins
-// on the headers for both the HiFive1 Board and the Freedom E300 Arty FPGA Dev Kit.
-#define PIN_0_OFFSET 16
-#define PIN_1_OFFSET 17
-#define PIN_2_OFFSET 18
-#define PIN_3_OFFSET 19
-#define PIN_4_OFFSET 20
-#define PIN_5_OFFSET 21
-#define PIN_6_OFFSET 22
-#define PIN_7_OFFSET 23
-#define PIN_8_OFFSET 0
-#define PIN_9_OFFSET 1
-#define PIN_10_OFFSET 2
-#define PIN_11_OFFSET 3
-#define PIN_12_OFFSET 4
-#define PIN_13_OFFSET 5
-//#define PIN_14_OFFSET 8 //This pin is not connected on either board.
-#define PIN_15_OFFSET 9
-#define PIN_16_OFFSET 10
-#define PIN_17_OFFSET 11
-#define PIN_18_OFFSET 12
-#define PIN_19_OFFSET 13
-
-// These are *PIN* numbers, not
-// GPIO Offset Numbers.
-#define PIN_SPI1_SCK    (13u)
-#define PIN_SPI1_MISO   (12u)
-#define PIN_SPI1_MOSI   (11u)
-#define PIN_SPI1_SS0    (10u)
-#define PIN_SPI1_SS1    (14u) 
-#define PIN_SPI1_SS2    (15u)
-#define PIN_SPI1_SS3    (16u)
-
-#define SS_PIN_TO_CS_ID(x) \
-  ((x==PIN_SPI1_SS0 ? 0 :		 \
-    (x==PIN_SPI1_SS1 ? 1 :		 \
-     (x==PIN_SPI1_SS2 ? 2 :		 \
-      (x==PIN_SPI1_SS3 ? 3 :		 \
-       -1))))) 
-
-
-// These buttons are present only on the Freedom E300 Arty Dev Kit.
-#ifdef HAS_BOARD_BUTTONS
-#define BUTTON_0_OFFSET 15
-#define BUTTON_1_OFFSET 30
-#define BUTTON_2_OFFSET 31
-
-#define INT_DEVICE_BUTTON_0 (INT_GPIO_BASE + BUTTON_0_OFFSET)
-#define INT_DEVICE_BUTTON_1 (INT_GPIO_BASE + BUTTON_1_OFFSET)
-#define INT_DEVICE_BUTTON_2 (INT_GPIO_BASE + BUTTON_2_OFFSET)
-
-#endif
-
-#define HAS_HFXOSC 1
-#define HAS_LFROSC_BYPASS 1
-
-#define RTC_FREQ 32768
-
-void write_hex(int fd, unsigned long int hex);
-
-#endif /* _SIFIVE_HIFIVE1_H */

fpga_spn/bsp/env/start.S

@@ -1,111 +0,0 @@
-// See LICENSE for license details.
-#include <sifive/smp.h>
-
-/* This is defined in sifive/platform.h, but that can't be included from
- * assembly. */
-#define CLINT_CTRL_ADDR 0x02000000
-
-	.section .init
-	.globl _start
-	.type _start,@function
-
-_start:
-	.cfi_startproc
-	.cfi_undefined ra
-.option push
-.option norelax
-	la gp, __global_pointer$
-.option pop
-	la sp, _sp
-
-#if defined(ENABLE_SMP)
-	smp_pause(t0, t1)
-#endif
-
-	/* Load data section */
-	la a0, _data_lma
-	la a1, _data
-	la a2, _edata
-	bgeu a1, a2, 2f
-1:
-	lw t0, (a0)
-	sw t0, (a1)
-	addi a0, a0, 4
-	addi a1, a1, 4
-	bltu a1, a2, 1b
-2:
-
-	/* Clear bss section */
-	la a0, __bss_start
-	la a1, _end
-	bgeu a0, a1, 2f
-1:
-	sw zero, (a0)
-	addi a0, a0, 4
-	bltu a0, a1, 1b
-2:
-
-	/* Call global constructors */
-	la a0, __libc_fini_array
-	call atexit
-	call __libc_init_array
-
-#ifndef __riscv_float_abi_soft
-	/* Enable FPU */
-	li t0, MSTATUS_FS
-	csrs mstatus, t0
-	csrr t1, mstatus
-	and t1, t1, t0
-	beqz t1, 1f
-	fssr x0
-1:
-#endif
-
-#if defined(ENABLE_SMP)
-	smp_resume(t0, t1)
-
-	csrr a0, mhartid
-	bnez a0, 2f
-#endif
-
-	auipc ra, 0
-	addi sp, sp, -16
-#if __riscv_xlen == 32
-	sw ra, 8(sp)
-#else
-	sd ra, 8(sp)
-#endif
-
-	/* argc = argv = 0 */
-	li a0, 0
-	li a1, 0
-	call main
-	tail exit
-1:
-	j 1b
-
-#if defined(ENABLE_SMP)
-2:
-	la t0, trap_entry
-	csrw mtvec, t0
-
-	csrr a0, mhartid
-	la t1, _sp
-	slli t0, a0, 10
-	sub sp, t1, t0
-
-	auipc ra, 0
-	addi sp, sp, -16
-#if __riscv_xlen == 32
-	sw ra, 8(sp)
-#else
-	sd ra, 8(sp)
-#endif
-
-	call secondary_main
-	tail exit
-
-1:
-	j 1b
-#endif
-	.cfi_endproc

fpga_spn/bsp/include/sifive/bits.h

@@ -1,36 +0,0 @@
-// See LICENSE for license details.
-#ifndef _RISCV_BITS_H
-#define _RISCV_BITS_H
-
-#define likely(x) __builtin_expect((x), 1)
-#define unlikely(x) __builtin_expect((x), 0)
-
-#define ROUNDUP(a, b) ((((a)-1)/(b)+1)*(b))
-#define ROUNDDOWN(a, b) ((a)/(b)*(b))
-
-#define MAX(a, b) ((a) > (b) ? (a) : (b))
-#define MIN(a, b) ((a) < (b) ? (a) : (b))
-#define CLAMP(a, lo, hi) MIN(MAX(a, lo), hi)
-
-#define EXTRACT_FIELD(val, which) (((val) & (which)) / ((which) & ~((which)-1)))
-#define INSERT_FIELD(val, which, fieldval) (((val) & ~(which)) | ((fieldval) * ((which) & ~((which)-1))))
-
-#define STR(x) XSTR(x)
-#define XSTR(x) #x
-
-#if __riscv_xlen == 64
-# define SLL32    sllw
-# define STORE    sd
-# define LOAD     ld
-# define LWU      lwu
-# define LOG_REGBYTES 3
-#else
-# define SLL32    sll
-# define STORE    sw
-# define LOAD     lw
-# define LWU      lw
-# define LOG_REGBYTES 2
-#endif
-#define REGBYTES (1 << LOG_REGBYTES)
-
-#endif

fpga_spn/bsp/include/sifive/const.h

@@ -1,18 +0,0 @@
-// See LICENSE for license details.
-/* Derived from <linux/const.h> */
-
-#ifndef _SIFIVE_CONST_H
-#define _SIFIVE_CONST_H
-
-#ifdef __ASSEMBLER__
-#define _AC(X,Y)        X
-#define _AT(T,X)        X
-#else
-#define _AC(X,Y)        (X##Y)
-#define _AT(T,X)        ((T)(X))
-#endif /* !__ASSEMBLER__*/
-
-#define _BITUL(x)       (_AC(1,UL) << (x))
-#define _BITULL(x)      (_AC(1,ULL) << (x))
-
-#endif /* _SIFIVE_CONST_H */

fpga_spn/bsp/include/sifive/devices/aon.h

@@ -1,88 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_AON_H
-#define _SIFIVE_AON_H
-
-/* Register offsets */
-
-#define AON_WDOGCFG     0x000
-#define AON_WDOGCOUNT   0x008
-#define AON_WDOGS       0x010
-#define AON_WDOGFEED    0x018
-#define AON_WDOGKEY     0x01C
-#define AON_WDOGCMP     0x020
-
-#define AON_RTCCFG      0x040
-#define AON_RTCLO       0x048
-#define AON_RTCHI       0x04C
-#define AON_RTCS        0x050
-#define AON_RTCCMP      0x060
-
-#define AON_BACKUP0     0x080
-#define AON_BACKUP1     0x084
-#define AON_BACKUP2     0x088
-#define AON_BACKUP3     0x08C
-#define AON_BACKUP4     0x090
-#define AON_BACKUP5     0x094
-#define AON_BACKUP6     0x098
-#define AON_BACKUP7     0x09C
-#define AON_BACKUP8     0x0A0
-#define AON_BACKUP9     0x0A4
-#define AON_BACKUP10    0x0A8
-#define AON_BACKUP11    0x0AC
-#define AON_BACKUP12    0x0B0
-#define AON_BACKUP13    0x0B4
-#define AON_BACKUP14    0x0B8
-#define AON_BACKUP15    0x0BC
-
-#define AON_PMUWAKEUPI0 0x100
-#define AON_PMUWAKEUPI1 0x104
-#define AON_PMUWAKEUPI2 0x108
-#define AON_PMUWAKEUPI3 0x10C
-#define AON_PMUWAKEUPI4 0x110
-#define AON_PMUWAKEUPI5 0x114
-#define AON_PMUWAKEUPI6 0x118
-#define AON_PMUWAKEUPI7 0x11C
-#define AON_PMUSLEEPI0  0x120
-#define AON_PMUSLEEPI1  0x124
-#define AON_PMUSLEEPI2  0x128
-#define AON_PMUSLEEPI3  0x12C
-#define AON_PMUSLEEPI4  0x130
-#define AON_PMUSLEEPI5  0x134
-#define AON_PMUSLEEPI6  0x138
-#define AON_PMUSLEEPI7  0x13C
-#define AON_PMUIE       0x140
-#define AON_PMUCAUSE    0x144
-#define AON_PMUSLEEP    0x148
-#define AON_PMUKEY      0x14C
-
-#define AON_LFROSC      0x070
-/* Constants */
-
-#define AON_WDOGKEY_VALUE  0x51F15E
-#define AON_WDOGFEED_VALUE 0xD09F00D
-
-#define AON_WDOGCFG_SCALE       0x0000000F
-#define AON_WDOGCFG_RSTEN       0x00000100
-#define AON_WDOGCFG_ZEROCMP     0x00000200
-#define AON_WDOGCFG_ENALWAYS    0x00001000
-#define AON_WDOGCFG_ENCOREAWAKE 0x00002000
-#define AON_WDOGCFG_CMPIP       0x10000000
-
-#define AON_RTCCFG_SCALE     0x0000000F
-#define AON_RTCCFG_ENALWAYS  0x00001000
-#define AON_RTCCFG_CMPIP     0x10000000
-
-#define AON_WAKEUPCAUSE_RESET   0x00
-#define AON_WAKEUPCAUSE_RTC     0x01
-#define AON_WAKEUPCAUSE_DWAKEUP 0x02
-#define AON_WAKEUPCAUSE_AWAKEUP 0x03
-
-#define AON_RESETCAUSE_POWERON  0x0000
-#define AON_RESETCAUSE_EXTERNAL 0x0100
-#define AON_RESETCAUSE_WATCHDOG 0x0200
-
-#define AON_PMUCAUSE_WAKEUPCAUSE 0x00FF
-#define AON_PMUCAUSE_RESETCAUSE  0xFF00
-
-#endif /* _SIFIVE_AON_H */

fpga_spn/bsp/include/sifive/devices/clint.h

@@ -1,14 +0,0 @@
-// See LICENSE for license details
-
-#ifndef _SIFIVE_CLINT_H
-#define _SIFIVE_CLINT_H
-
-
-#define CLINT_MSIP 0x0000
-#define CLINT_MSIP_size   0x4
-#define CLINT_MTIMECMP 0x4000
-#define CLINT_MTIMECMP_size 0x8
-#define CLINT_MTIME 0xBFF8
-#define CLINT_MTIME_size 0x8
-
-#endif /* _SIFIVE_CLINT_H */ 

fpga_spn/bsp/include/sifive/devices/gpio.h

@@ -1,24 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_GPIO_H
-#define _SIFIVE_GPIO_H
-
-#define GPIO_INPUT_VAL  (0x00)
-#define GPIO_INPUT_EN   (0x04)
-#define GPIO_OUTPUT_EN  (0x08)
-#define GPIO_OUTPUT_VAL (0x0C)
-#define GPIO_PULLUP_EN  (0x10)
-#define GPIO_DRIVE      (0x14)
-#define GPIO_RISE_IE    (0x18)
-#define GPIO_RISE_IP    (0x1C)
-#define GPIO_FALL_IE    (0x20)
-#define GPIO_FALL_IP    (0x24)
-#define GPIO_HIGH_IE    (0x28)
-#define GPIO_HIGH_IP    (0x2C)
-#define GPIO_LOW_IE     (0x30)
-#define GPIO_LOW_IP     (0x34)
-#define GPIO_IOF_EN     (0x38)
-#define GPIO_IOF_SEL    (0x3C)
-#define GPIO_OUTPUT_XOR    (0x40)
-
-#endif /* _SIFIVE_GPIO_H */

fpga_spn/bsp/include/sifive/devices/otp.h

@@ -1,23 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_OTP_H
-#define _SIFIVE_OTP_H
-
-/* Register offsets */
-
-#define OTP_LOCK         0x00
-#define OTP_CK           0x04
-#define OTP_OE           0x08
-#define OTP_SEL          0x0C
-#define OTP_WE           0x10
-#define OTP_MR           0x14
-#define OTP_MRR          0x18
-#define OTP_MPP          0x1C
-#define OTP_VRREN        0x20
-#define OTP_VPPEN        0x24
-#define OTP_A            0x28
-#define OTP_D            0x2C
-#define OTP_Q            0x30
-#define OTP_READ_TIMINGS 0x34
-
-#endif

fpga_spn/bsp/include/sifive/devices/plic.h

@@ -1,31 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef PLIC_H
-#define PLIC_H
-
-#include <sifive/const.h>
-
-// 32 bits per source
-#define PLIC_PRIORITY_OFFSET            _AC(0x0000,UL)
-#define PLIC_PRIORITY_SHIFT_PER_SOURCE  2
-// 1 bit per source (1 address)
-#define PLIC_PENDING_OFFSET             _AC(0x1000,UL)
-#define PLIC_PENDING_SHIFT_PER_SOURCE   0
-
-//0x80 per target
-#define PLIC_ENABLE_OFFSET              _AC(0x2000,UL)
-#define PLIC_ENABLE_SHIFT_PER_TARGET    7
-
-
-#define PLIC_THRESHOLD_OFFSET           _AC(0x200000,UL)
-#define PLIC_CLAIM_OFFSET               _AC(0x200004,UL)
-#define PLIC_THRESHOLD_SHIFT_PER_TARGET 12
-#define PLIC_CLAIM_SHIFT_PER_TARGET     12
-
-#define PLIC_MAX_SOURCE                 1023
-#define PLIC_SOURCE_MASK                0x3FF
-
-#define PLIC_MAX_TARGET                 15871
-#define PLIC_TARGET_MASK                0x3FFF
-
-#endif /* PLIC_H */

fpga_spn/bsp/include/sifive/devices/prci.h

@@ -1,56 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_PRCI_H
-#define _SIFIVE_PRCI_H
-
-/* Register offsets */
-
-#define PRCI_HFROSCCFG   (0x0000)
-#define PRCI_HFXOSCCFG   (0x0004)
-#define PRCI_PLLCFG      (0x0008)
-#define PRCI_PLLDIV      (0x000C)
-#define PRCI_PROCMONCFG  (0x00F0)
-
-/* Fields */
-#define ROSC_DIV(x)    (((x) & 0x2F) << 0 ) 
-#define ROSC_TRIM(x)   (((x) & 0x1F) << 16)
-#define ROSC_EN(x)     (((x) & 0x1 ) << 30) 
-#define ROSC_RDY(x)    (((x) & 0x1 ) << 31)
-
-#define XOSC_EN(x)     (((x) & 0x1) << 30)
-#define XOSC_RDY(x)    (((x) & 0x1) << 31)
-
-#define PLL_R(x)       (((x) & 0x7)  << 0)
-// single reserved bit for F LSB.
-#define PLL_F(x)       (((x) & 0x3F) << 4)
-#define PLL_Q(x)       (((x) & 0x3)  << 10)
-#define PLL_SEL(x)     (((x) & 0x1)  << 16)
-#define PLL_REFSEL(x)  (((x) & 0x1)  << 17)
-#define PLL_BYPASS(x)  (((x) & 0x1)  << 18)
-#define PLL_LOCK(x)    (((x) & 0x1)  << 31)
-
-#define PLL_R_default 0x1
-#define PLL_F_default 0x1F
-#define PLL_Q_default 0x3
-
-#define PLL_REFSEL_HFROSC 0x0
-#define PLL_REFSEL_HFXOSC 0x1
-
-#define PLL_SEL_HFROSC 0x0
-#define PLL_SEL_PLL    0x1
-
-#define PLL_FINAL_DIV(x)      (((x) & 0x3F) << 0)
-#define PLL_FINAL_DIV_BY_1(x) (((x) & 0x1 ) << 8)
-
-#define PROCMON_DIV(x)   (((x) & 0x1F) << 0)
-#define PROCMON_TRIM(x)  (((x) & 0x1F) << 8)
-#define PROCMON_EN(x)    (((x) & 0x1)  << 16)
-#define PROCMON_SEL(x)   (((x) & 0x3)  << 24)
-#define PROCMON_NT_EN(x) (((x) & 0x1)  << 28)
-
-#define PROCMON_SEL_HFCLK     0
-#define PROCMON_SEL_HFXOSCIN  1
-#define PROCMON_SEL_PLLOUTDIV 2
-#define PROCMON_SEL_PROCMON   3
-
-#endif // _SIFIVE_PRCI_H

fpga_spn/bsp/include/sifive/devices/pwm.h

@@ -1,37 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_PWM_H
-#define _SIFIVE_PWM_H
-
-/* Register offsets */
-
-#define PWM_CFG   0x00
-#define PWM_COUNT 0x08
-#define PWM_S     0x10
-#define PWM_CMP0  0x20
-#define PWM_CMP1  0x24
-#define PWM_CMP2  0x28
-#define PWM_CMP3  0x2C
-
-/* Constants */
-
-#define PWM_CFG_SCALE       0x0000000F
-#define PWM_CFG_STICKY      0x00000100
-#define PWM_CFG_ZEROCMP     0x00000200
-#define PWM_CFG_DEGLITCH    0x00000400
-#define PWM_CFG_ENALWAYS    0x00001000
-#define PWM_CFG_ONESHOT     0x00002000
-#define PWM_CFG_CMP0CENTER  0x00010000
-#define PWM_CFG_CMP1CENTER  0x00020000
-#define PWM_CFG_CMP2CENTER  0x00040000
-#define PWM_CFG_CMP3CENTER  0x00080000
-#define PWM_CFG_CMP0GANG    0x01000000
-#define PWM_CFG_CMP1GANG    0x02000000
-#define PWM_CFG_CMP2GANG    0x04000000
-#define PWM_CFG_CMP3GANG    0x08000000
-#define PWM_CFG_CMP0IP      0x10000000
-#define PWM_CFG_CMP1IP      0x20000000
-#define PWM_CFG_CMP2IP      0x40000000
-#define PWM_CFG_CMP3IP      0x80000000
-
-#endif /* _SIFIVE_PWM_H */

fpga_spn/bsp/include/sifive/devices/uart.h

@@ -1,27 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_UART_H
-#define _SIFIVE_UART_H
-
-/* Register offsets */
-#define UART_REG_TXFIFO         0x00
-#define UART_REG_RXFIFO         0x04
-#define UART_REG_TXCTRL         0x08
-#define UART_REG_RXCTRL         0x0c
-#define UART_REG_IE             0x10
-#define UART_REG_IP             0x14
-#define UART_REG_DIV            0x18
-
-/* TXCTRL register */
-#define UART_TXEN               0x1
-#define UART_TXWM(x)            (((x) & 0xffff) << 16)
-
-/* RXCTRL register */
-#define UART_RXEN               0x1
-#define UART_RXWM(x)            (((x) & 0xffff) << 16)
-
-/* IP register */
-#define UART_IP_TXWM            0x1
-#define UART_IP_RXWM            0x2
-
-#endif /* _SIFIVE_UART_H */

fpga_spn/bsp/include/sifive/sections.h

@@ -1,17 +0,0 @@
-// See LICENSE for license details.
-#ifndef _SECTIONS_H
-#define _SECTIONS_H
-
-extern unsigned char _rom[];
-extern unsigned char _rom_end[];
-
-extern unsigned char _ram[];
-extern unsigned char _ram_end[];
-
-extern unsigned char _ftext[];
-extern unsigned char _etext[];
-extern unsigned char _fbss[];
-extern unsigned char _ebss[];
-extern unsigned char _end[];
-
-#endif /* _SECTIONS_H */

fpga_spn/bsp/include/sifive/smp.h

@@ -1,65 +0,0 @@
-#ifndef SIFIVE_SMP
-#define SIFIVE_SMP
-
-// The maximum number of HARTs this code supports
-#ifndef MAX_HARTS
-#define MAX_HARTS 32
-#endif
-#define CLINT_END_HART_IPI CLINT_CTRL_ADDR + (MAX_HARTS*4)
-
-// The hart that non-SMP tests should run on
-#ifndef NONSMP_HART
-#define NONSMP_HART 0
-#endif
-
-/* If your test cannot handle multiple-threads, use this: 
- *   smp_disable(reg1)
- */
-#define smp_disable(reg1, reg2)			 \
-  csrr reg1, mhartid				;\
-  li   reg2, NONSMP_HART			;\
-  beq  reg1, reg2, hart0_entry			;\
-42:						;\
-  wfi    					;\
-  j 42b						;\
-hart0_entry:
-
-/* If your test needs to temporarily block multiple-threads, do this:
- *    smp_pause(reg1, reg2)
- *    ... single-threaded work ...
- *    smp_resume(reg1, reg2)
- *    ... multi-threaded work ...
- */
-
-#define smp_pause(reg1, reg2)	 \
-  li reg2, 0x8			;\
-  csrw mie, reg2		;\
-  csrr reg2, mhartid		;\
-  bnez reg2, 42f
-
-#define smp_resume(reg1, reg2)	 \
-  li reg1, CLINT_CTRL_ADDR	;\
-41:				;\
-  li reg2, 1			;\
-  sw reg2, 0(reg1)		;\
-  addi reg1, reg1, 4		;\
-  li reg2, CLINT_END_HART_IPI	;\
-  blt reg1, reg2, 41b		;\
-42:				;\
-  wfi    			;\
-  csrr reg2, mip		;\
-  andi reg2, reg2, 0x8		;\
-  beqz reg2, 42b		;\
-  li reg1, CLINT_CTRL_ADDR	;\
-  csrr reg2, mhartid		;\
-  slli reg2, reg2, 2		;\
-  add reg2, reg2, reg1		;\
-  sw zero, 0(reg2)		;\
-41:				;\
-  lw reg2, 0(reg1)		;\
-  bnez reg2, 41b		;\
-  addi reg1, reg1, 4		;\
-  li reg2, CLINT_END_HART_IPI	;\
-  blt reg1, reg2, 41b
-
-#endif

fpga_spn/src/dma_regs.h

@@ -1,62 +0,0 @@
-
-#ifndef _DMA_REGS_H_
-#define _DMA_REGS_H_
-
-#include <util/bit_field.h>
-#include <cstdint>
-
-#define DMA_REG_START               0x00
-#define DMA_REG_CLEAR_INTERRUPT     0x0C
-#define DMA_REG_FPGA_ADDRESS        0x10
-#define DMA_REG_SC_ADDRESS          0x20
-#define DMA_REG_OPERATION           0x30 // 0 = READ, 1 = WRITE, 2 = ALLOC, 3 = FREE
-#define DMA_REG_BYTES               0x40
-#define DMA_REG_ALLOC_ADDRESS       0x50
-
-template<uint32_t BASE_ADDR>
-class dma_regs {
-public:
-    // storage declarations
-//    BEGIN_BF_DECL(start_t, uint32_t);
-//        BF_FIELD(start, 0, 1);
-//    END_BF_DECL() r_start;
-    uint32_t r_start;
-
-    uint32_t r_address;
-
-    uint32_t r_operation;
-
-    uint32_t r_bytes;
-
-    static inline uint32_t& start_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+DMA_REG_START);
-    }
-
-    static inline uint32_t& clear_interrupt_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+DMA_REG_CLEAR_INTERRUPT);
-    }
-
-    static inline uint32_t & fpga_address_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+DMA_REG_FPGA_ADDRESS);
-    }
-
-    static inline uint32_t & sc_address_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+DMA_REG_SC_ADDRESS);
-    }
-
-    static inline uint32_t & operation_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+DMA_REG_OPERATION);
-    }
-
-    static inline uint32_t & bytes_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+DMA_REG_BYTES);
-    }
-
-    static inline uint32_t & alloc_address_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+DMA_REG_ALLOC_ADDRESS);
-    }
-
-
-};
-
-#endif // _SPN_REGS_H_

fpga_spn/src/init.h

@@ -1,96 +0,0 @@
-#ifndef SRC_INIT_H_
-#define SRC_INIT_H_
-
-#include <cstdio>
-#include <array>
-
-#include "delay.h"
-#include "bsp.h"
-#include "plic/plic_driver.h"
-
-typedef void (*function_ptr_t) (void);
-//! Instance data for the PLIC.
-plic_instance_t g_plic;
-std::array<function_ptr_t,PLIC_NUM_INTERRUPTS>  g_ext_interrupt_handlers;
-bool hw_interrupt{true};
-bool dma_interrupt{true};
-
-
-/*! \brief external interrupt handler
- *
- * routes the peripheral interrupts to the the respective handler
- *
- */
-extern "C" void handle_m_ext_interrupt() {
-    plic_source int_num  = PLIC_claim_interrupt(&g_plic);
-    if ((int_num >=1 ) && (int_num < PLIC_NUM_INTERRUPTS))
-      g_ext_interrupt_handlers[int_num]();
-    else
-      exit(1 + (uintptr_t) int_num);
-    PLIC_complete_interrupt(&g_plic, int_num);
-}
-/*! \brief dummy interrupt handler
- *
- */
-void no_interrupt_handler (void) {};
-/*! \brief configure the per-interrupt handler
- *
- */
-void configure_irq(size_t irq_num, function_ptr_t handler, unsigned char prio=1) {
-    g_ext_interrupt_handlers[irq_num] = handler;
-    // Priority must be set > 0 to trigger the interrupt.
-    PLIC_set_priority(&g_plic, irq_num, prio);
-    // Have to enable the interrupt both at the GPIO level, and at the PLIC level.
-    PLIC_enable_interrupt(&g_plic, irq_num);
-}
-
-void wait_for_spn_interrupt() {
-    // wait until HW is done
-    if(hw_interrupt) {
-        do{
-            asm("wfi");
-            asm("nop");
-        }while(hw_interrupt);
-    }
-	hw_interrupt=true;
-}
-
-void wait_for_dma_interrupt() {
-    // wait until HW is done
-    if(dma_interrupt) {
-        do{
-            asm("wfi");
-            asm("nop");
-        }while(dma_interrupt);
-    }
-    dma_interrupt=true;
-}
-
-/*!\brief initializes platform
- *
- */
-void platform_init(){
-	// UART init section TODO: clarify how to get the functions from init.c?
-	GPIO_REG(GPIO_IOF_SEL) &= ~IOF0_UART0_MASK;
-	GPIO_REG(GPIO_IOF_EN) |= IOF0_UART0_MASK;
-	UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
-
-    F_CPU=PRCI_measure_mcycle_freq(20, RTC_FREQ);
-    printf("core freq at %d Hz\n", F_CPU);
-    // initialie interupt & trap handling
-    write_csr(mtvec, &trap_entry);
-
-    PLIC_init(&g_plic, PLIC_CTRL_ADDR, PLIC_NUM_INTERRUPTS, PLIC_NUM_PRIORITIES, 0);
-    // Disable the machine & timer interrupts until setup is done.
-    clear_csr(mie, MIP_MEIP);
-    clear_csr(mie, MIP_MTIP);
-    for (auto& h:g_ext_interrupt_handlers) h=no_interrupt_handler;
-    // Enable interrupts in general.
-    set_csr(mstatus, MSTATUS_MIE);
-    // Enable the Machine-External bit in MIE
-    set_csr(mie, MIP_MEIP);
-
-	//hw_interrupt = false;
-}
-
-#endif /* SRC_INIT_H_ */

fpga_spn/src/raven_spn.cpp

@@ -1,133 +0,0 @@
-#include "raven_spn.h"
-#include "spn_regs.h"
-#include "dma_regs.h"
-#include "init.h"
-#include "spn_checker_regs.h"
-
-using spn = spn_regs<0x90000000>;
-using dma = dma_regs<0xB0000000>;
-using spn_checker = spn_checker_regs<0x10040000>;
-
-void run_xspn(int in_addr, int out_addr, int num_samples, int in_beats, int out_beats) {
-	spn::mode_reg() = 0;
-	spn::input_length_reg() = num_samples; 		// each sample consists of 5 uint8 values
-	spn::input_addr_reg() = in_addr;
-	spn::output_addr_reg() = out_addr;
-	spn::num_of_in_beats_reg() = in_beats;	// Number of AXI4 burst beats needed to load all input data
-	spn::num_of_out_beats_reg() = out_beats;	// Number of AXI4 burst beats needed to store all result data
-    printf("Starting XSPN\n");
-	spn::start_reg() = 1;
-}
-
-void fpga_dma(int direction, int fpga_address, int sc_address, int num_bytes) {
-    dma::operation_reg() = direction;
-    dma::fpga_address_reg() = fpga_address;
-    dma::sc_address_reg() = sc_address;
-    dma::bytes_reg() = num_bytes;
-    dma::start_reg() = 1;
-    wait_for_dma_interrupt();
-    dma::clear_interrupt_reg() = 1;
-}
-
-int fpga_alloc(int num_bytes) {
-    dma::operation_reg() = 2;
-    dma::bytes_reg() = num_bytes;
-    dma::start_reg() = 1;
-    wait_for_dma_interrupt();
-    dma::clear_interrupt_reg() = 1;
-    return dma::alloc_address_reg();
-}
-
-void fpga_free(int address) {
-    dma::operation_reg() = 3;
-    dma::fpga_address_reg() = address;
-    dma::start_reg() = 1;
-    wait_for_dma_interrupt();
-    dma::clear_interrupt_reg() = 1;
-}
-
-static void spn_interrupt_handler(){
-    printf("spn_interrupt_handler\n");
-    hw_interrupt = false;
-}
-
-static void dma_interrupt_handler(){
-    printf("dma_interrupt_handler\n");
-    dma_interrupt = false;
-}
-
-/*! \brief main function
- *
- */
-int main() {
-
-
-    platform_init();
-    configure_irq(2, spn_interrupt_handler);
-    configure_irq(22, dma_interrupt_handler);
-
-
-
-    spn::mode_reg() = 1;
-    spn::start_reg() = 1;
-    wait_for_spn_interrupt();
-    spn::interrupt_reg() = 1;
-    uint32_t readout = spn::readout_reg();
-    printf("READOUT HW:0x%x\n", readout);
-
-    uint32_t axi_bytes = readout;
-    axi_bytes = axi_bytes & 0xff;
-    axi_bytes = 1 << axi_bytes;
-
-    printf("AXI Bytes: %d\n", axi_bytes);
-
-    uint32_t sample_bytes = readout;
-    sample_bytes = sample_bytes >> 16;
-    sample_bytes = sample_bytes / 8;
-
-    printf("Sample Bytes: %d\n", sample_bytes);
-
-    uint32_t result_bytes = 8;
-
-    printf("Result Bytes: %d\n", result_bytes);
-
-    uint32_t step = 50000;
-    uint32_t iterations = 2;
-
-    
-    uint32_t in_beats = (step * sample_bytes) / axi_bytes;
-    if (in_beats * axi_bytes < step * sample_bytes) in_beats++;
-    uint32_t out_beats = (step * result_bytes) / axi_bytes;
-    if (out_beats * axi_bytes < step * result_bytes) out_beats++;
-
-	int in_addr  = 0x20010000; // place input samples in the SPI memory
-    int out_addr = 0x20210000;
-    int fpga_address_in = fpga_alloc(step * sample_bytes + 64);
-    int fpga_address_out = fpga_alloc(step * result_bytes + 64);
-
-    // inject SPN input data
-    spn_checker::input_addr_reg() = in_addr;
-    spn_checker::num_input_samples_reg() = sample_bytes * step * iterations;
-    spn_checker::start_data_trans_reg() = 1;
-    spn_checker::output_addr_reg() = out_addr;
-
-    //run_xspn(in_addr, out_addr);
-    for (int k = 0; k < iterations*step; k+=step) {
-        fpga_dma(1, fpga_address_in, in_addr, step * sample_bytes);
-        run_xspn(fpga_address_in, fpga_address_out, step, in_beats, out_beats);
-        wait_for_spn_interrupt();
-        spn::interrupt_reg() = 1;
-        printf("XSPN finished\n");
-        fpga_dma(0, fpga_address_out, out_addr, step * result_bytes);
-        spn_checker::offset_reg() = k;
-        spn_checker::length_reg() = step;
-        spn_checker::start_result_check_reg() = 1;
-
-		in_addr += step * sample_bytes; // 5 bytes in each sample
-	}
-
-    fpga_free(fpga_address_in);
-    fpga_free(fpga_address_out);
-
-	return 0;
-}

fpga_spn/src/raven_spn.h

@@ -1,6 +0,0 @@
-#ifndef RAVEN_SPN_H_
-#define RAVEN_SPN_H_
-
-extern "C" void handle_m_ext_interrupt();
-
-#endif /* RAVEN_SPN_H_ */

fpga_spn/src/spn_checker_regs.h

@@ -1,104 +0,0 @@
-////////////////////////////////////////////////////////////////////////////////
-// Copyright (C) 2017, MINRES Technologies GmbH
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are met:
-//
-// 1. Redistributions of source code must retain the above copyright notice,
-//    this list of conditions and the following disclaimer.
-//
-// 2. Redistributions in binary form must reproduce the above copyright notice,
-//    this list of conditions and the following disclaimer in the documentation
-//    and/or other materials provided with the distribution.
-//
-// 3. Neither the name of the copyright holder nor the names of its contributors
-//    may be used to endorse or promote products derived from this software
-//    without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-// POSSIBILITY OF SUCH DAMAGE.
-//
-// Created on: Thu Oct 01 15:45:55 CEST 2020
-//             *      spn_regs.h Author: <RDL Generator>
-//
-////////////////////////////////////////////////////////////////////////////////
-#pragma once
-
-#include <util/bit_field.h>
-#include <cstdint>
-
-#define SPN_CNTL_REG_START_RESULT_CHECK   0x00
-#define SPN_CNTL_REG_OFFSET               0x10
-#define SPN_CNTL_REG_LENGTH               0x20
-#define SPN_CNTL_REG_OUTPUT_ADDR          0x30
-#define SPN_CNTL_REG_INPUT_ADDR           0x40
-#define SPN_CNTL_REG_NUM_INPUT_SAMPLES    0x50
-#define SPN_CNTL_REG_START_DATA_TRANS     0x60
-#define SPN_CNTL_REG_OUTPUT_ADDR2         0x70
-
-template<uint32_t BASE_ADDR>
-class spn_checker_regs {
-public:
-    // storage declarations
-//    BEGIN_BF_DECL(start_t, uint32_t);
-//        BF_FIELD(start, 0, 1);
-//    END_BF_DECL() r_start;
-    uint32_t r_start_result_check;
-
-    uint32_t r_offset;
-
-    uint32_t r_length;
-
-    uint32_t r_output_addr;
-
-    uint32_t r_output_addr2;
-
-    uint32_t r_input_addr;
-
-    uint32_t r_num_input_samples;
-
-    uint32_t r_start_data_trans;
-
-    static inline uint32_t& start_result_check_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_CNTL_REG_START_RESULT_CHECK);
-    }
-
-    static inline uint32_t & offset_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_CNTL_REG_OFFSET);
-    }
-
-    static inline uint32_t & length_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_CNTL_REG_LENGTH);
-    }
-
-    static inline uint32_t & output_addr_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_CNTL_REG_OUTPUT_ADDR);
-    }
-
-    static inline uint32_t & output_addr2_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_CNTL_REG_OUTPUT_ADDR2);
-    }
-
-    static inline uint32_t & input_addr_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_CNTL_REG_INPUT_ADDR);
-    }
-
-    static inline uint32_t & num_input_samples_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_CNTL_REG_NUM_INPUT_SAMPLES);
-    }
-
-    static inline uint32_t& start_data_trans_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_CNTL_REG_START_DATA_TRANS);
-    }
-
-};

fpga_spn/src/spn_regs.h

@@ -1,116 +0,0 @@
-////////////////////////////////////////////////////////////////////////////////
-// Copyright (C) 2017, MINRES Technologies GmbH
-// All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are met:
-//
-// 1. Redistributions of source code must retain the above copyright notice,
-//    this list of conditions and the following disclaimer.
-//
-// 2. Redistributions in binary form must reproduce the above copyright notice,
-//    this list of conditions and the following disclaimer in the documentation
-//    and/or other materials provided with the distribution.
-//
-// 3. Neither the name of the copyright holder nor the names of its contributors
-//    may be used to endorse or promote products derived from this software
-//    without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
-// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-// POSSIBILITY OF SUCH DAMAGE.
-//
-// Created on: Thu Oct 01 15:45:55 CEST 2020
-//             *      spn_regs.h Author: <RDL Generator>
-//
-////////////////////////////////////////////////////////////////////////////////
-
-#ifndef _SPN_REGS_H_
-#define _SPN_REGS_H_
-
-#include <util/bit_field.h>
-#include <cstdint>
-
-#define SPN_REG_START               0x00
-#define SPN_REG_READOUT             0x10
-#define SPN_REG_MODE                0x20
-#define SPN_REG_INPUT_LENGTH        0x30
-#define SPN_REG_INPUT_ADDR          0x40
-#define SPN_REG_OUTPUT_ADDR         0x50
-#define SPN_REG_NUM_OF_INPUT_BEATS  0x60
-#define SPN_REG_NUM_OF_OUTPUT_BEATS 0x70
-#define SPN_REG_INTERRUPT           0x0C
-
-template<uint32_t BASE_ADDR>
-class spn_regs {
-public:
-    // storage declarations
-//    BEGIN_BF_DECL(start_t, uint32_t);
-//        BF_FIELD(start, 0, 1);
-//    END_BF_DECL() r_start;
-    uint32_t r_start;
-
-    uint32_t r_readout;
-
-    uint32_t r_mode;
-
-    uint32_t r_input_length;
-
-    uint32_t r_input_addr;
-
-    uint32_t r_output_addr;
-
-    uint32_t r_num_of_input_beats;
-
-    uint32_t r_num_of_output_beats;
-
-//    static inline start_t& start_reg(){
-//        return *reinterpret_cast<start_t*>(BASE_ADDR+SPN_REG_START);
-//    }
-    static inline uint32_t& start_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_REG_START);
-    }
-
-    static inline uint32_t & readout_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_REG_READOUT);
-    }
-
-    static inline uint32_t & mode_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_REG_MODE);
-    }
-
-    static inline uint32_t & input_length_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_REG_INPUT_LENGTH);
-    }
-
-    static inline uint32_t & input_addr_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_REG_INPUT_ADDR);
-    }
-
-    static inline uint32_t & output_addr_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_REG_OUTPUT_ADDR);
-    }
-
-    static inline uint32_t & num_of_in_beats_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_REG_NUM_OF_INPUT_BEATS);
-    }
-
-    static inline uint32_t & num_of_out_beats_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_REG_NUM_OF_OUTPUT_BEATS);
-    }
-
-    static inline uint32_t & interrupt_reg(){
-        return *reinterpret_cast<uint32_t*>(BASE_ADDR+SPN_REG_INTERRUPT);
-    }
-
-};
-
-#endif // _SPN_REGS_H_

hello-world/.cproject

@@ -57,7 +57,6 @@
 		<buildTargets>
 			<target name="all" path="" targetID="org.eclipse.cdt.build.MakeTargetBuilder">
 				<buildCommand>make</buildCommand>
-				<buildArguments/>
 				<buildTarget>all</buildTarget>
 				<stopOnError>true</stopOnError>
 				<useDefaultCommand>true</useDefaultCommand>
@@ -65,12 +64,27 @@
 			</target>
 			<target name="clean" path="" targetID="org.eclipse.cdt.build.MakeTargetBuilder">
 				<buildCommand>make</buildCommand>
-				<buildArguments/>
 				<buildTarget>clean</buildTarget>
 				<stopOnError>true</stopOnError>
 				<useDefaultCommand>true</useDefaultCommand>
 				<runAllBuilders>true</runAllBuilders>
 			</target>
+			<target name="clean all BOARD=tgc-vp" path="" targetID="org.eclipse.cdt.build.MakeTargetBuilder">
+				<buildCommand>make</buildCommand>
+				<buildArguments/>
+				<buildTarget>clean all BOARD=tgc-vp</buildTarget>
+				<stopOnError>true</stopOnError>
+				<useDefaultCommand>true</useDefaultCommand>
+				<runAllBuilders>true</runAllBuilders>
+			</target>
+			<target name="clean all BOARD=iss" path="" targetID="org.eclipse.cdt.build.MakeTargetBuilder">
+				<buildCommand>make</buildCommand>
+				<buildArguments/>
+				<buildTarget>clean all BOARD=iss</buildTarget>
+				<stopOnError>true</stopOnError>
+				<useDefaultCommand>true</useDefaultCommand>
+				<runAllBuilders>true</runAllBuilders>
+			</target>
 		</buildTargets>
 	</storageModule>
 </cproject>

hello-world/.gitignore

@@ -0,0 +1,2 @@
+/hello
+/hello.dis

hello-world/Makefile

@@ -1,23 +1,28 @@
 
 TARGET  = hello
+ISA?=imc
+
 C_SRCS  = $(wildcard *.c) 
-#HEADERS = $(wildcard *.h)
+HEADERS = $(wildcard *.h)
-CFLAGS += -g 
+OPT ?= -O2
+CFLAGS += $(OPT) -g 
 
-BOARD=freedom-e300-hifive1
+BOARD=iss
-LINK_TARGET=flash
+LINK_TARGET=link
-RISCV_ARCH:=rv32i
+RISCV_ARCH:=rv32$(ISA)
-RISCV_ABI:=ilp32
+ifeq ($(ISA),e)
-LDFLAGS := -Wl,--wrap=scanf -Wl,--wrap=printf -march=$(RISCV_ARCH) -mabi=$(RISCV_ABI) -g
+    RISCV_ABI:=ilp32e
+else
+    RISCV_ABI:=ilp32
+endif
+LDFLAGS += -g -Wl,--wrap=printf
 
-#TOOL_DIR?=/opt/shared/riscv/FreedomStudio/20180122/SiFive/riscv64-unknown-elf-gcc-20171231-x86_64-linux-centos6/bin
+compiler := $(shell which riscv64-unknown-elf-gcc)
-TOOL_DIR=/opt/shared/riscv/tools/Ubuntu/riscv64-unknown-elf-gcc-8.3.0-2020.04.1-x86_64-linux-ubuntu14/bin
+TOOL_DIR=$(dir $(compiler))
 
-BSP_BASE = ./bsp
+TRIPLET=riscv64-unknown-elf
-include $(BSP_BASE)/env/common.mk
+BSP_BASE = ../bare-metal-bsp
+include $(BSP_BASE)/env/common-gcc.mk
 
-.PHONY: all
+$(TARGET).vlog:$(TARGET)
-all: $(TARGET).dump
+	riscv32-unknown-elf-objcopy -O verilog $(TARGET) $(TARGET).vlog
-
-$(TARGET).dump: $(TARGET)
-	$(TOOL_DIR)/$(TRIPLET)-objdump -d -S -C $< > $@

hello-world/bsp/drivers/clic/clic_driver.c

@@ -1,163 +0,0 @@
-// See LICENSE for license details.
-
-#include "sifive/devices/clic.h"
-#include "clic/clic_driver.h"
-#include "platform.h"
-#include "encoding.h"
-#include <string.h>
-
-
-void volatile_memzero(uint8_t * base, unsigned int size) {
-  volatile uint8_t * ptr;
-  for (ptr = base; ptr < (base + size); ptr++){
-    *ptr = 0;
-  }
-}
-
-// Note that there are no assertions or bounds checking on these
-// parameter values.
-void clic_init (
-                clic_instance_t * this_clic,
-                uintptr_t hart_addr,
-                interrupt_function_ptr_t* vect_table,
-                interrupt_function_ptr_t default_handler,
-                uint32_t num_irq,
-                uint32_t num_config_bits
-                )
-{
-  this_clic->hart_addr=  hart_addr;
-  this_clic->vect_table= vect_table;
-  this_clic->num_config_bits= num_config_bits;
-
-  //initialize vector table
-  for(int i=0;i++;i<num_irq)  {
-    this_clic->vect_table[i] = default_handler;
-  }
-
-  //set base vectors
-  write_csr(mtvt, vect_table);
-
-
-  //clear all interrupt enables and pending
-  volatile_memzero((uint8_t*)(this_clic->hart_addr+CLIC_INTIE), num_irq);
-  volatile_memzero((uint8_t*)(this_clic->hart_addr+CLIC_INTIP), num_irq);
-
-  //clear nlbits and nvbits; all interrupts trap to level 15
-  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_CFG)=0;
-
-}
-
-void clic_install_handler (clic_instance_t * this_clic, uint32_t source, interrupt_function_ptr_t handler) {
-    this_clic->vect_table[source] = handler;
-}
-
-void clic_enable_interrupt (clic_instance_t * this_clic, uint32_t source) {
-    *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIE+source) = 1;
-}
-
-void clic_disable_interrupt (clic_instance_t * this_clic, uint32_t source){
-  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIE+source) = 0;
-}
-
-void clic_set_pending(clic_instance_t * this_clic, uint32_t source){
-  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIP+source) = 1;
-}
-
-void clic_clear_pending(clic_instance_t * this_clic, uint32_t source){
-  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIP+source) = 0;
-}
-
-void clic_set_intcfg (clic_instance_t * this_clic, uint32_t source, uint32_t intcfg){
-  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTCFG+source) = intcfg;
-}
-
-uint8_t clic_get_intcfg  (clic_instance_t * this_clic, uint32_t source){
-  return *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTCFG+source);
-}
-
-void clic_set_cliccfg (clic_instance_t * this_clic, uint32_t cfg){
-  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_CFG) = cfg;
-}
-
-uint8_t clic_get_cliccfg  (clic_instance_t * this_clic){
-  return *(volatile uint8_t*)(this_clic->hart_addr+CLIC_CFG);
-}
-
-//sets an interrupt level based encoding of nmbits, nlbits
-uint8_t clic_set_int_level( clic_instance_t * this_clic, uint32_t source, uint8_t level) {
-  //extract nlbits
-  uint8_t nlbits = clic_get_cliccfg(this_clic);
-  nlbits = (nlbits >>1) & 0x7;
-
-  //shift level right to mask off unused bits
-  level = level>>((this_clic->num_config_bits)-nlbits); //plus this_clic->nmbits which is always 0 for now.
-  //shift level into correct bit position
-  level = level << (8-this_clic->num_config_bits) + (this_clic->num_config_bits - nlbits);
- 
-  //write to clicintcfg
-  uint8_t current_intcfg = clic_get_intcfg(this_clic, source);
-  clic_set_intcfg(this_clic, source, (current_intcfg | level));
-
-  return level;
-}
-
-//gets an interrupt level based encoding of nmbits, nlbits
-uint8_t clic_get_int_level( clic_instance_t * this_clic, uint32_t source) {
-  uint8_t level;
-  level = clic_get_intcfg(this_clic, source);
-
-  //extract nlbits
-  uint8_t nlbits = clic_get_cliccfg(this_clic);
-  nlbits = (nlbits >>1) & 0x7;
-
-  //shift level
-  level = level >> (8-(this_clic->num_config_bits));
-
-  //shift level right to mask off priority bits
-  level = level>>(this_clic->num_config_bits-nlbits); //this_clic->nmbits which is always 0 for now.
-
-  return level;
-}
-
-//sets an interrupt priority based encoding of nmbits, nlbits
-uint8_t clic_set_int_priority( clic_instance_t * this_clic, uint32_t source, uint8_t priority) {
-  //priority bits = num_config_bits - nlbits
-  //extract nlbits
-  uint8_t nlbits = clic_get_cliccfg(this_clic);
-  nlbits = (nlbits >>1) & 0x7;
-
-  uint8_t priority_bits = this_clic->num_config_bits-nlbits;
-  if(priority_bits = 0) {
-    //no bits to set
-    return 0;
-  }
-  //mask off unused bits
-  priority = priority >> (8-priority_bits);
-  //shift into the correct bit position
-  priority = priority << (8-(this_clic->num_config_bits));
-
-  //write to clicintcfg
-  uint8_t current_intcfg = clic_get_intcfg(this_clic, source);
-  clic_set_intcfg(this_clic, source, (current_intcfg | priority));
-  return current_intcfg;
-}
-
-//gets an interrupt priority based encoding of nmbits, nlbits
-uint8_t clic_get_int_priority( clic_instance_t * this_clic, uint32_t source) {
-  uint8_t priority;
-  priority = clic_get_intcfg(this_clic, source);
-
-  //extract nlbits
-  uint8_t nlbits = clic_get_cliccfg(this_clic);
-  nlbits = (nlbits >>1) & 0x7;
-
-  //shift left to mask off level bits
-  priority = priority << nlbits;
-
-  //shift priority
-  priority = priority >> (8-((this_clic->num_config_bits)+nlbits));
-
- return priority;
-}
-
-

hello-world/bsp/drivers/clic/clic_driver.h

@@ -1,44 +0,0 @@
-// See LICENSE file for licence details
-
-#ifndef PLIC_DRIVER_H
-#define PLIC_DRIVER_H
-
-
-__BEGIN_DECLS
-
-#include "platform.h"
-
-typedef void (*interrupt_function_ptr_t) (void);
-
-typedef struct __clic_instance_t
-{
-  uintptr_t hart_addr;
-  interrupt_function_ptr_t* vect_table;
-  uint32_t num_config_bits;
-  uint32_t num_sources;  
-} clic_instance_t;
-
-// Note that there are no assertions or bounds checking on these
-// parameter values.
-void clic_init (clic_instance_t * this_clic, uintptr_t hart_addr, interrupt_function_ptr_t* vect_table, interrupt_function_ptr_t default_handler, uint32_t num_irq,uint32_t num_config_bits);
-void clic_install_handler (clic_instance_t * this_clic, uint32_t source, interrupt_function_ptr_t handler);
-void clic_enable_interrupt (clic_instance_t * this_clic, uint32_t source);
-void clic_disable_interrupt (clic_instance_t * this_clic, uint32_t source);
-void clic_set_pending(clic_instance_t * this_clic, uint32_t source);
-void clic_clear_pending(clic_instance_t * this_clic, uint32_t source);
-void clic_set_intcfg (clic_instance_t * this_clic, uint32_t source, uint32_t intcfg);
-uint8_t clic_get_intcfg (clic_instance_t * this_clic, uint32_t source);
-void clic_set_cliccfg (clic_instance_t * this_clic, uint32_t cfg);
-uint8_t clic_get_cliccfg  (clic_instance_t * this_clic);
-//sets an interrupt level based encoding of nmbits, nlbits
-uint8_t clic_set_int_level( clic_instance_t * this_clic, uint32_t source, uint8_t level);
-//get an interrupt level based encoding of nmbits, nlbits
-uint8_t clic_get_int_level( clic_instance_t * this_clic, uint32_t source);
-//sets an interrupt priority based encoding of nmbits, nlbits
-uint8_t clic_set_int_priority( clic_instance_t * this_clic, uint32_t source, uint8_t priority);
-//sets an interrupt priority based encoding of nmbits, nlbits
-uint8_t clic_get_int_priority( clic_instance_t * this_clic, uint32_t source);
-
-__END_DECLS
-
-#endif

hello-world/bsp/drivers/fe300prci/fe300prci_driver.c

@@ -1,252 +0,0 @@
-// See LICENSE file for license details
-
-#include "platform.h"
-
-#ifdef PRCI_CTRL_ADDR
-#include "fe300prci/fe300prci_driver.h"
-#include <unistd.h>
-
-#define rdmcycle(x)  {				       \
-    uint32_t lo, hi, hi2;			       \
-    __asm__ __volatile__ ("1:\n\t"		       \
-			  "csrr %0, mcycleh\n\t"       \
-			  "csrr %1, mcycle\n\t"	       \
-			  "csrr %2, mcycleh\n\t"		\
-			  "bne  %0, %2, 1b\n\t"			\
-			  : "=r" (hi), "=r" (lo), "=r" (hi2)) ;	\
-    *(x) = lo | ((uint64_t) hi << 32); 				\
-  }
-
-uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq)
-{
-
-  uint32_t start_mtime = CLINT_REG(CLINT_MTIME);
-  uint32_t end_mtime = start_mtime + mtime_ticks + 1;
-
-  // Make sure we won't get rollover.
-  while (end_mtime < start_mtime){
-    start_mtime = CLINT_REG(CLINT_MTIME);
-    end_mtime = start_mtime + mtime_ticks + 1;
-  }
-
-  // Don't start measuring until mtime edge.
-  uint32_t tmp = start_mtime;
-  do {
-    start_mtime = CLINT_REG(CLINT_MTIME);
-  } while (start_mtime == tmp);
-  
-  uint64_t start_mcycle;
-  rdmcycle(&start_mcycle);
-  
-  while (CLINT_REG(CLINT_MTIME) < end_mtime) ;
-  
-  uint64_t end_mcycle;
-  rdmcycle(&end_mcycle);
-  uint32_t difference = (uint32_t) (end_mcycle - start_mcycle);
-
-  uint64_t freq = ((uint64_t) difference * mtime_freq) / mtime_ticks;
-  return (uint32_t) freq & 0xFFFFFFFF;
-  
-}
- 
-
-void PRCI_use_hfrosc(int div, int trim)
-{
-  // Make sure the HFROSC is running at its default setting
-  // It is OK to change this even if we are running off of it.
-  
-  PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1));
-
-  while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0);
-  
-  PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1);
-}
-
-void PRCI_use_pll(int refsel, int bypass,
-			 int r, int f, int q, int finaldiv,
-			 int hfroscdiv, int hfrosctrim)
-{
-  // Ensure that we aren't running off the PLL before we mess with it.
-  if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) {
-    // Make sure the HFROSC is running at its default setting
-    PRCI_use_hfrosc(4, 16);
-  }
-  
-  // Set PLL Source to be HFXOSC if desired.
-  uint32_t config_value = 0;
-
-  config_value |= PLL_REFSEL(refsel);
-  
-  if (bypass) {
-    // Bypass
-    config_value |= PLL_BYPASS(1);
-
-    PRCI_REG(PRCI_PLLCFG) = config_value;
-
-    // If we don't have an HFXTAL, this doesn't really matter.
-    // Set our Final output divide to divide-by-1:
-    PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
-  } else {
-  
-    // To overclock, use the hfrosc
-    if (hfrosctrim >= 0 && hfroscdiv >= 0) {
-      PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
-    }
-    
-    // Set DIV Settings for PLL
-    
-    // (Legal values of f_REF are 6-48MHz)
-
-    // Set DIVR to divide-by-2 to get 8MHz frequency
-    // (legal values of f_R are 6-12 MHz)
-
-    config_value |= PLL_BYPASS(1);
-    config_value |= PLL_R(r);
-
-    // Set DIVF to get 512Mhz frequncy
-    // There is an implied multiply-by-2, 16Mhz.
-    // So need to write 32-1
-    // (legal values of f_F are 384-768 MHz)
-    config_value |= PLL_F(f);
-
-    // Set DIVQ to divide-by-2 to get 256 MHz frequency
-    // (legal values of f_Q are 50-400Mhz)
-    config_value |= PLL_Q(q);
-
-    // Set our Final output divide to divide-by-1:
-    if (finaldiv == 1){
-      PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
-    } else {
-      PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV(finaldiv-1));
-    }
-
-    PRCI_REG(PRCI_PLLCFG) = config_value;
-
-    // Un-Bypass the PLL.
-    PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1);
-
-    // Wait for PLL Lock
-    // Note that the Lock signal can be glitchy.
-    // Need to wait 100 us
-    // RTC is running at 32kHz.
-    // So wait 4 ticks of RTC.
-    uint32_t now = CLINT_REG(CLINT_MTIME);
-    while (CLINT_REG(CLINT_MTIME) - now < 4) ;
-    
-    // Now it is safe to check for PLL Lock
-    while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0);
-
-  }
-
-  // Switch over to PLL Clock source
-  PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1);
-
-  // If we're running off HFXOSC, turn off the HFROSC to
-  // save power.
-  if (refsel) {
-    PRCI_REG(PRCI_HFROSCCFG) &= ~ROSC_EN(1);
-  }
-  
-}
-
-void PRCI_use_default_clocks()
-{
-  // Turn off the LFROSC
-  AON_REG(AON_LFROSC) &= ~ROSC_EN(1);
-
-  // Use HFROSC
-  PRCI_use_hfrosc(4, 16);
-}
-
-void PRCI_use_hfxosc(uint32_t finaldiv)
-{
-  
-  PRCI_use_pll(1, // Use HFXTAL
-	       1, // Bypass = 1
-	       0, // PLL settings don't matter
-	       0, // PLL settings don't matter
-	       0, // PLL settings don't matter
-	       finaldiv,
-	       -1,
-	       -1);
-}
-
-// This is a generic function, which
-// doesn't span the entire range of HFROSC settings.
-// It only adjusts the trim, which can span a hundred MHz or so.
-// This function does not check the legality of the PLL settings
-// at all, and it is quite possible to configure invalid PLL settings
-// this way.
-// It returns the actual measured CPU frequency.
-
-uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target )
-{
-
-  uint32_t hfrosctrim = 0;
-  uint32_t hfroscdiv = 4;
-  uint32_t prev_trim = 0;
-
-  // In this function we use PLL settings which
-  // will give us a 32x multiplier from the output
-  // of the HFROSC source to the output of the
-  // PLL. We first measure our HFROSC to get the
-  // right trim, then finally use it as the PLL source.
-  // We should really check here that the f_cpu
-  // requested is something in the limit of the PLL. For
-  // now that is up to the user.
-
-  // This will undershoot for frequencies not divisible by 16.
-  uint32_t desired_hfrosc_freq = (f_cpu/ 16);
-
-  PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
-  
-  // Ignore the first run (for icache reasons)
-  uint32_t cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
-
-  cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
-  uint32_t prev_freq = cpu_freq;
-  
-  while ((cpu_freq < desired_hfrosc_freq) && (hfrosctrim < 0x1F)){
-    prev_trim = hfrosctrim;
-    prev_freq = cpu_freq;
-    hfrosctrim ++;
-    PRCI_use_hfrosc(hfroscdiv, hfrosctrim);
-    cpu_freq = PRCI_measure_mcycle_freq(3000, RTC_FREQ);
-  } 
-
-  // We couldn't go low enough
-  if (prev_freq > desired_hfrosc_freq){
-    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
-    cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ);
-    return cpu_freq;
-  }
-  
-  // We couldn't go high enough
-  if (cpu_freq < desired_hfrosc_freq){
-    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
-    cpu_freq = PRCI_measure_mcycle_freq(1000, RTC_FREQ);
-    return cpu_freq;
-  }
-
-  // Check for over/undershoot
-  switch(target) {
-  case(PRCI_FREQ_CLOSEST):
-    if ((desired_hfrosc_freq - prev_freq) < (cpu_freq - desired_hfrosc_freq)) {
-      PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
-    } else {
-      PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, hfrosctrim);
-    }
-    break;
-  case(PRCI_FREQ_UNDERSHOOT):
-    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, prev_trim);
-    break;
-  default:
-    PRCI_use_pll(0, 0, 1, 31, 1, 1, hfroscdiv, hfrosctrim);
-  }
-
-  cpu_freq =  PRCI_measure_mcycle_freq(1000, RTC_FREQ);
-  return cpu_freq;
-
-}
-
-#endif

hello-world/bsp/drivers/fe300prci/fe300prci_driver.h

@@ -1,79 +0,0 @@
-// See LICENSE file for license details
-
-#ifndef _FE300PRCI_DRIVER_H_
-#define _FE300PRCI_DRIVER_H_
-
-__BEGIN_DECLS
-
-#include <unistd.h>
-
-typedef enum prci_freq_target {
-  
-  PRCI_FREQ_OVERSHOOT,
-  PRCI_FREQ_CLOSEST,
-  PRCI_FREQ_UNDERSHOOT
-
-} PRCI_freq_target;
-
-/* Measure and return the approximate frequency of the 
- * CPU, as given by measuring the mcycle counter against 
- * the mtime ticks.
- */
-uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq);
-
-/* Safely switch over to the HFROSC using the given div
- * and trim settings.
- */
-void PRCI_use_hfrosc(int div, int trim);
-
-/* Safely switch over to the 16MHz HFXOSC,
- * applying the finaldiv clock divider (1 is the lowest
- * legal value).
- */
-void PRCI_use_hfxosc(uint32_t finaldiv);
-
-/* Safely switch over to the PLL using the given
- * settings.
- * 
- * Note that not all combinations of the inputs are actually
- * legal, and this function does not check for their
- * legality ("safely" means that this function won't turn off
- * or glitch the clock the CPU is actually running off, but
- * doesn't protect against you making it too fast or slow.)
- */
-
-void PRCI_use_pll(int refsel, int bypass,
-			 int r, int f, int q, int finaldiv,
-			 int hfroscdiv, int hfrosctrim);
-
-/* Use the default clocks configured at reset.
- * This is ~16Mhz HFROSC and turns off the LFROSC
- * (on the current FE310 Dev Platforms, an external LFROSC is 
- * used as it is more power efficient).
- */
-void PRCI_use_default_clocks();
-
-/* This routine will adjust the HFROSC trim
- * while using HFROSC as the clock source, 
- * measure the resulting frequency, then
- * use it as the PLL clock source, 
- * in an attempt to get over, under, or close to the 
- * requested frequency. It returns the actual measured 
- * frequency. 
- *
- * Note that the requested frequency must be within the 
- * range supported by the PLL so not all values are 
- * achievable with this function, and not all 
- * are guaranteed to actually work. The PLL
- * is rated higher than the hardware.
- * 
- * There is no check on the desired f_cpu frequency, it
- * is up to the user to specify something reasonable.
- */
-
-uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target);
-
-__END_DECLS
-
-#endif
-  

hello-world/bsp/drivers/plic/plic_driver.c

@@ -1,127 +0,0 @@
-// See LICENSE for license details.
-
-#include "sifive/devices/plic.h"
-#include "plic/plic_driver.h"
-#include "platform.h"
-#include "encoding.h"
-#include <string.h>
-
-
-// Note that there are no assertions or bounds checking on these
-// parameter values.
-
-void volatile_memzero(uint8_t * base, unsigned int size)
-{
-  volatile uint8_t * ptr;
-  for (ptr = base; ptr < (base + size); ptr++){
-    *ptr = 0;
-  }
-}
-
-void PLIC_init (
-                plic_instance_t * this_plic,
-                uintptr_t         base_addr,
-                uint32_t num_sources,
-                uint32_t num_priorities
-                )
-{
-  
-  this_plic->base_addr = base_addr;
-  this_plic->num_sources = num_sources;
-  this_plic->num_priorities = num_priorities;
-  
-  // Disable all interrupts (don't assume that these registers are reset).
-  unsigned long hart_id = read_csr(mhartid);
-  volatile_memzero((uint8_t*) (this_plic->base_addr +
-                               PLIC_ENABLE_OFFSET +
-                               (hart_id << PLIC_ENABLE_SHIFT_PER_TARGET)),
-                   (num_sources + 8) / 8);
-  
-  // Set all priorities to 0 (equal priority -- don't assume that these are reset).
-  volatile_memzero ((uint8_t *)(this_plic->base_addr +
-                                PLIC_PRIORITY_OFFSET),
-                    (num_sources + 1) << PLIC_PRIORITY_SHIFT_PER_SOURCE);
-
-  // Set the threshold to 0.
-  volatile plic_threshold* threshold = (plic_threshold*)
-    (this_plic->base_addr +
-     PLIC_THRESHOLD_OFFSET +
-     (hart_id << PLIC_THRESHOLD_SHIFT_PER_TARGET));
-
-  *threshold = 0;
-  
-}
-
-void PLIC_set_threshold (plic_instance_t * this_plic,
-			 plic_threshold threshold){
-
-  unsigned long hart_id = read_csr(mhartid);  
-  volatile plic_threshold* threshold_ptr = (plic_threshold*) (this_plic->base_addr +
-                                                              PLIC_THRESHOLD_OFFSET +
-                                                              (hart_id << PLIC_THRESHOLD_SHIFT_PER_TARGET));
-
-  *threshold_ptr = threshold;
-
-}
-  
-
-void PLIC_enable_interrupt (plic_instance_t * this_plic, plic_source source){
-
-  unsigned long hart_id = read_csr(mhartid);
-  volatile uint8_t * current_ptr = (volatile uint8_t *)(this_plic->base_addr +
-                                                        PLIC_ENABLE_OFFSET +
-                                                        (hart_id << PLIC_ENABLE_SHIFT_PER_TARGET) +
-                                                        (source >> 3));
-  uint8_t current = *current_ptr;
-  current = current | ( 1 << (source & 0x7));
-  *current_ptr = current;
-
-}
-
-void PLIC_disable_interrupt (plic_instance_t * this_plic, plic_source source){
-  
-  unsigned long hart_id = read_csr(mhartid);
-  volatile uint8_t * current_ptr = (volatile uint8_t *) (this_plic->base_addr +
-                                                         PLIC_ENABLE_OFFSET +
-                                                         (hart_id << PLIC_ENABLE_SHIFT_PER_TARGET) +
-                                                         (source >> 3));
-  uint8_t current = *current_ptr;
-  current = current & ~(( 1 << (source & 0x7)));
-  *current_ptr = current;
-  
-}
-
-void PLIC_set_priority (plic_instance_t * this_plic, plic_source source, plic_priority priority){
-
-  if (this_plic->num_priorities > 0) {
-    volatile plic_priority * priority_ptr = (volatile plic_priority *)
-      (this_plic->base_addr +
-       PLIC_PRIORITY_OFFSET +
-       (source << PLIC_PRIORITY_SHIFT_PER_SOURCE));
-    *priority_ptr = priority;
-  }
-}
-
-plic_source PLIC_claim_interrupt(plic_instance_t * this_plic){
-  
-  unsigned long hart_id = read_csr(mhartid);
-
-  volatile plic_source * claim_addr = (volatile plic_source * )
-    (this_plic->base_addr +
-     PLIC_CLAIM_OFFSET +
-     (hart_id << PLIC_CLAIM_SHIFT_PER_TARGET));
-
-  return  *claim_addr;
-  
-}
-
-void PLIC_complete_interrupt(plic_instance_t * this_plic, plic_source source){
-  
-  unsigned long hart_id = read_csr(mhartid);
-  volatile plic_source * claim_addr = (volatile plic_source *) (this_plic->base_addr +
-                                                                PLIC_CLAIM_OFFSET +
-                                                                (hart_id << PLIC_CLAIM_SHIFT_PER_TARGET));
-  *claim_addr = source;
-  
-}
-

hello-world/bsp/drivers/plic/plic_driver.h

@@ -1,51 +0,0 @@
-// See LICENSE file for licence details
-
-#ifndef PLIC_DRIVER_H
-#define PLIC_DRIVER_H
-
-
-__BEGIN_DECLS
-
-#include "platform.h"
-
-typedef struct __plic_instance_t
-{
-  uintptr_t base_addr;
-
-  uint32_t num_sources;
-  uint32_t num_priorities;
-  
-} plic_instance_t;
-
-typedef uint32_t plic_source;
-typedef uint32_t plic_priority;
-typedef uint32_t plic_threshold;
-
-void PLIC_init (
-                plic_instance_t * this_plic,
-                uintptr_t         base_addr,
-                uint32_t num_sources,
-                uint32_t num_priorities
-                );
-
-void PLIC_set_threshold (plic_instance_t * this_plic,
-			 plic_threshold threshold);
-  
-void PLIC_enable_interrupt (plic_instance_t * this_plic,
-			    plic_source source);
-
-void PLIC_disable_interrupt (plic_instance_t * this_plic,
-			     plic_source source);
-  
-void PLIC_set_priority (plic_instance_t * this_plic,
-			plic_source source,
-			plic_priority priority);
-
-plic_source PLIC_claim_interrupt(plic_instance_t * this_plic);
-
-void PLIC_complete_interrupt(plic_instance_t * this_plic,
-			     plic_source source);
-
-__END_DECLS
-
-#endif

hello-world/bsp/env/common.mk

@@ -1,66 +0,0 @@
-# See LICENSE for license details.
-
-ifndef _SIFIVE_MK_COMMON
-_SIFIVE_MK_COMMON := # defined
-
-.PHONY: all
-all: $(TARGET)
-
-include $(BSP_BASE)/libwrap/libwrap.mk
-
-ENV_DIR = $(BSP_BASE)/env
-PLATFORM_DIR = $(ENV_DIR)/$(BOARD)
-
-ASM_SRCS += $(ENV_DIR)/start.S
-ASM_SRCS += $(ENV_DIR)/entry.S
-C_SRCS += $(PLATFORM_DIR)/init.c
-
-LINKER_SCRIPT := $(PLATFORM_DIR)/$(LINK_TARGET).lds
-
-INCLUDES += -I$(BSP_BASE)/include
-INCLUDES += -I$(BSP_BASE)/drivers/
-INCLUDES += -I$(ENV_DIR)
-INCLUDES += -I$(PLATFORM_DIR)
-
-TOOL_DIR ?= $(BSP_BASE)/../toolchain/bin
-
-LDFLAGS += -T $(LINKER_SCRIPT) -nostartfiles
-LDFLAGS += -L$(ENV_DIR) --specs=nano.specs
-
-ASM_OBJS := $(ASM_SRCS:.S=.o)
-C_OBJS   := $(C_SRCS:.c=.o)
-CXX_OBJS := $(CXX_SRCS:.cpp=.o)
-
-LINK_OBJS += $(ASM_OBJS) $(C_OBJS) $(CXX_OBJS)
-LINK_DEPS += $(LINKER_SCRIPT)
-
-CLEAN_OBJS += $(TARGET) $(LINK_OBJS)
-
-CFLAGS += -march=$(RISCV_ARCH)
-CFLAGS += -mabi=$(RISCV_ABI)
-CFLAGS += -mcmodel=medany
-
-TRIPLET?=riscv64-unknown-elf
-CXX=$(TOOL_DIR)/$(TRIPLET)-c++
-CC=$(TOOL_DIR)/$(TRIPLET)-gcc
-LD=$(TOOL_DIR)/$(TRIPLET)-gcc
-AR=$(TOOL_DIR)/$(TRIPLET)-ar
-
-
-$(TARGET): $(LINK_OBJS) $(LINK_DEPS)
-	$(LD) $(LINK_OBJS) $(LDFLAGS) $(LIBWRAP) -o $@
-	
-$(ASM_OBJS): %.o: %.S $(HEADERS)
-	$(CC) $(CFLAGS) $(INCLUDES) -c -o $@ $<
-
-$(C_OBJS): %.o: %.c $(HEADERS)
-	$(CC) $(CFLAGS) $(INCLUDES) -include sys/cdefs.h -c -o $@ $<
-
-$(CXX_OBJS): %.o: %.cpp $(HEADERS)
-	$(CXX) $(CFLAGS) $(CXXFLAGS) $(INCLUDES) -include sys/cdefs.h -c -o $@ $<
-
-.PHONY: clean
-clean:
-	rm -f $(CLEAN_OBJS) $(LIBWRAP)
-
-endif # _SIFIVE_MK_COMMON

hello-world/bsp/env/coreip-e2-arty/flash.lds

@@ -1,161 +0,0 @@
-OUTPUT_ARCH( "riscv" )
-
-ENTRY( _start )
-
-MEMORY
-{
-  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
-  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 64K
-}
-
-PHDRS
-{
-  flash PT_LOAD;
-  ram_init PT_LOAD;
-  ram PT_NULL;
-}
-
-SECTIONS
-{
-  __stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
-
-  .init           :
-  {
-    KEEP (*(SORT_NONE(.init)))
-  } >flash AT>flash :flash
-
-  .text           :
-  {
-    *(.text.unlikely .text.unlikely.*)
-    *(.text.startup .text.startup.*)
-    *(.text .text.*)
-    *(.gnu.linkonce.t.*)
-  } >flash AT>flash :flash
-
-  .fini           :
-  {
-    KEEP (*(SORT_NONE(.fini)))
-  } >flash AT>flash :flash
-
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-
-  .rodata         :
-  {
-    *(.rdata)
-    *(.rodata .rodata.*)
-    *(.gnu.linkonce.r.*)
-  } >flash AT>flash :flash
-
-  . = ALIGN(4);
-
-  .preinit_array  :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } >flash AT>flash :flash
-
-  .init_array     :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
-    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } >flash AT>flash :flash
-
-  .fini_array     :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
-    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } >flash AT>flash :flash
-
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } >flash AT>flash :flash
-
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } >flash AT>flash :flash
-
-  .lalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data_lma = . );
-  } >flash AT>flash :flash
-
-  .dalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data = . );
-  } >ram AT>flash :ram_init
-
-  .data          :
-  {
-    *(.data .data.*)
-    *(.gnu.linkonce.d.*)
-    . = ALIGN(8);
-    PROVIDE( __global_pointer$ = . + 0x800 );
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-    . = ALIGN(8);
-    *(.srodata.cst16)
-    *(.srodata.cst8)
-    *(.srodata.cst4)
-    *(.srodata.cst2)
-    *(.srodata .srodata.*)
-  } >ram AT>flash :ram_init
-
-  . = ALIGN(4);
-  PROVIDE( _edata = . );
-  PROVIDE( edata = . );
-
-  PROVIDE( _fbss = . );
-  PROVIDE( __bss_start = . );
-  .bss            :
-  {
-    *(.sbss*)
-    *(.gnu.linkonce.sb.*)
-    *(.bss .bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN(4);
-  } >ram AT>ram :ram
-
-  . = ALIGN(8);
-  PROVIDE( _end = . );
-  PROVIDE( end = . );
-
-  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
-  {
-    PROVIDE( _heap_end = . );
-    . = __stack_size;
-    PROVIDE( _sp = . );
-  } >ram AT>ram :ram
-}

hello-world/bsp/env/coreip-e2-arty/init.c

@@ -1,98 +0,0 @@
-//See LICENSE for license details.
-#include <stdint.h>
-#include <stdio.h>
-#include <unistd.h>
-
-#include "platform.h"
-#include "encoding.h"
-
-#define CPU_FREQ 32000000
-#define XSTR(x) #x
-#define STR(x) XSTR(x)
-
-extern int main(int argc, char** argv);
-
-unsigned long get_cpu_freq()
-{
-  return CPU_FREQ;
-}
-
-unsigned long get_timer_freq()
-{
-  return get_cpu_freq();
-}
-
-uint64_t get_timer_value()
-{
-#if __riscv_xlen == 32
-  while (1) {
-    uint32_t hi = read_csr(mcycleh);
-    uint32_t lo = read_csr(mcycle);
-    if (hi == read_csr(mcycleh))
-      return ((uint64_t)hi << 32) | lo;
-  }
-#else
-  return read_csr(mcycle);
-#endif
-}
-
-static void uart_init(size_t baud_rate)
-{
-  UART0_REG(UART_REG_DIV) = (get_cpu_freq() ) / baud_rate - 1;
-  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
-}
-
-
-typedef void (*interrupt_function_ptr_t) (void);
-interrupt_function_ptr_t localISR[CLIC_NUM_INTERRUPTS] __attribute__((aligned(64)));
-
-
-void trap_entry(void) __attribute__((interrupt, aligned(64)));
-void trap_entry(void)
-{
-  unsigned long mcause = read_csr(mcause);
-  unsigned long mepc = read_csr(mepc);
-  if (mcause & MCAUSE_INT)  {
-    localISR[mcause & MCAUSE_CAUSE] ();
-  } else {
-    while(1); 
-  }
-}
-
-#ifdef CLIC_DIRECT
-#else
-void default_handler(void)__attribute__((interrupt));;
-#endif
-void default_handler(void)
-{
-  puts("default handler\n");
-  while(1);
-}
-
-void _init()
-{
-#ifndef NO_INIT
-  uart_init(115200);
-
-  puts("core freq at " STR(CPU_FREQ) " Hz\n");
-
-//initialize vector table
-  int i=0;
-  while(i<CLIC_NUM_INTERRUPTS)	{
-    localISR[i++] = default_handler;
-  }
-  
-  write_csr(mtvt, localISR);
-
-#ifdef CLIC_DIRECT
-  write_csr(mtvec, ((unsigned long)&trap_entry | MTVEC_CLIC));
-#else
-  write_csr(mtvec, ((unsigned long)&trap_entry | MTVEC_CLIC_VECT));
-#endif
-
-#endif
-}
-
-void _fini()
-{
-}

hello-world/bsp/env/coreip-e2-arty/openocd.cfg

@@ -1,31 +0,0 @@
-# JTAG adapter setup
-adapter_khz     10000
-
-interface ftdi
-ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
-ftdi_vid_pid 0x15ba 0x002a
-
-ftdi_layout_init 0x0808 0x0a1b
-ftdi_layout_signal nSRST -oe 0x0200
-#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
-ftdi_layout_signal LED -data 0x0800
-
-set _CHIPNAME riscv
-jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
-
-set _TARGETNAME $_CHIPNAME.cpu
-
-target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
-$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
-
-# Un-comment these two flash lines if you have a SPI flash and want to write
-# it.
-flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
-init
-if {[ info exists pulse_srst]} {
-  ftdi_set_signal nSRST 0
-  ftdi_set_signal nSRST z
-}
-halt
-#flash protect 0 64 last off
-echo "Ready for Remote Connections"

hello-world/bsp/env/coreip-e2-arty/platform.h

@@ -1,98 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_PLATFORM_H
-#define _SIFIVE_PLATFORM_H
-
-// Some things missing from the official encoding.h
-
-#if __riscv_xlen == 32
-#define MCAUSE_INT         0x80000000UL
-#define MCAUSE_CAUSE       0x000003FFUL
-#else
-#define MCAUSE_INT         0x8000000000000000UL
-#define MCAUSE_CAUSE       0x00000000000003FFUL
-#endif
-
-#define MTVEC_DIRECT       0X00
-#define MTVEC_VECTORED     0x01
-#define MTVEC_CLIC         0x02
-#define MTVEC_CLIC_VECT    0X03
-
-
-#include "sifive/const.h"
-#include "sifive/devices/gpio.h"
-#include "sifive/devices/clint.h"
-#include "sifive/devices/clic.h"
-#include "sifive/devices/pwm.h"
-#include "sifive/devices/spi.h"
-#include "sifive/devices/uart.h"
-
-/****************************************************************************
- * Platform definitions
- *****************************************************************************/
-
-// Memory map
-#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
-#define CLIC_HART0_ADDR _AC(0x02800000,UL)
-#define GPIO_CTRL_ADDR _AC(0x20002000,UL)
-#define PWM0_CTRL_ADDR _AC(0x20005000,UL)
-#define RAM_MEM_ADDR _AC(0x80000000,UL)
-#define RAM_MEM_SIZE _AC(0x10000,UL)
-#define SPI0_CTRL_ADDR _AC(0x20004000,UL)
-#define SPI0_MEM_ADDR _AC(0x40000000,UL)
-#define SPI0_MEM_SIZE _AC(0x20000000,UL)
-#define TESTBENCH_MEM_ADDR _AC(0x20000000,UL)
-#define TESTBENCH_MEM_SIZE _AC(0x10000000,UL)
-//#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
-#define UART0_CTRL_ADDR _AC(0x20000000,UL)
-
-// IOF masks
-
-// Interrupt numbers
-#define RESERVED_INT_BASE 0
-#define UART0_INT_BASE 1
-#define EXTERNAL_INT_BASE 2
-#define SPI0_INT_BASE 6
-#define GPIO_INT_BASE 7
-#define PWM0_INT_BASE 23
-
-// Helper functions
-#define _REG64(p, i) (*(volatile uint64_t *)((p) + (i)))
-#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
-#define _REG16(p, i) (*(volatile uint16_t *)((p) + (i)))
-#define SET_BITS(reg, mask, value) if ((value) == 0) { (reg) &= ~(mask); } else { (reg) |= (mask); }
-#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
-#define CLIC0_REG(offset) _REG32(CLIC_HART0_ADDR, offset)
-#define CLIC0_REG8(offset)   (*(volatile uint8_t *)((CLIC_HART0_ADDR) + (offset)))
-#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
-#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
-#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
-#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
-#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
-#define CLIC0_REG64(offset) _REG64(CLIC_HART0_ADDR, offset)
-#define GPIO_REG64(offset) _REG64(GPIO_CTRL_ADDR, offset)
-#define PWM0_REG64(offset) _REG64(PWM0_CTRL_ADDR, offset)
-#define SPI0_REG64(offset) _REG64(SPI0_CTRL_ADDR, offset)
-#define UART0_REG64(offset) _REG64(UART0_CTRL_ADDR, offset)
-
-// Misc
-
-#define NUM_GPIO 16
-
-#define CLIC_NUM_INTERRUPTS 28 + 16
-
-#ifdef E20
-   #define CLIC_CONFIG_BITS 2
-#else
-   #define CLIC_CONFIG_BITS 4
-#endif
-
-#define HAS_BOARD_BUTTONS
-
-#include "coreplexip-arty.h"
-
-unsigned long get_cpu_freq(void);
-unsigned long get_timer_freq(void);
-uint64_t get_timer_value(void);
-
-#endif /* _SIFIVE_PLATFORM_H */

hello-world/bsp/env/coreip-e2-arty/settings.mk

@@ -1,3 +0,0 @@
-# Describes the CPU on this board to the rest of the SDK.
-RISCV_ARCH := rv32imac
-RISCV_ABI  := ilp32

hello-world/bsp/env/coreip-e2-arty/tim-split.lds

@@ -1,157 +0,0 @@
-OUTPUT_ARCH( "riscv" )
-
-ENTRY( _start )
-
-MEMORY
-{
-  flash (rxai!w) : ORIGIN = 0x80008000, LENGTH = 32K
-  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 32K
-}
-
-PHDRS
-{
-  flash PT_LOAD;
-  ram_init PT_LOAD;
-  ram PT_NULL;
-}
-
-SECTIONS
-{
-  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
-
-  .init           :
-  {
-    KEEP (*(SORT_NONE(.init)))
-  } >flash AT>flash :flash
-
-  .text           :
-  {
-    *(.text.unlikely .text.unlikely.*)
-    *(.text.startup .text.startup.*)
-    *(.text .text.*)
-    *(.gnu.linkonce.t.*)
-  } >flash AT>flash :flash
-
-  .fini           :
-  {
-    KEEP (*(SORT_NONE(.fini)))
-  } >flash AT>flash :flash
-
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-
-  . = ALIGN(4);
-
-  .preinit_array  :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } >flash AT>flash :flash
-
-  .init_array     :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
-    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } >flash AT>flash :flash
-
-  .fini_array     :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
-    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } >flash AT>flash :flash
-
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } >flash AT>flash :flash
-
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } >flash AT>flash :flash
-
-  .lalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data_lma = . );
-  } >flash AT>flash :flash
-
-  .dalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data = . );
-  } >ram AT>flash :ram_init
-
-  .data          :
-  {
-    *(.rdata)
-    *(.rodata .rodata.*)
-    *(.gnu.linkonce.r.*)
-    *(.data .data.*)
-    *(.gnu.linkonce.d.*)
-    . = ALIGN(8);
-    PROVIDE( __global_pointer$ = . + 0x800 );
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-    . = ALIGN(8);
-    *(.srodata.cst16)
-    *(.srodata.cst8)
-    *(.srodata.cst4)
-    *(.srodata.cst2)
-    *(.srodata .srodata.*)
-  } >ram AT>flash :ram_init
-
-  . = ALIGN(4);
-  PROVIDE( _edata = . );
-  PROVIDE( edata = . );
-
-  PROVIDE( _fbss = . );
-  PROVIDE( __bss_start = . );
-  .bss            :
-  {
-    *(.sbss*)
-    *(.gnu.linkonce.sb.*)
-    *(.bss .bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN(4);
-  } >ram AT>ram :ram
-
-  . = ALIGN(8);
-  PROVIDE( _end = . );
-  PROVIDE( end = . );
-
-  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
-  {
-    PROVIDE( _heap_end = . );
-    . = __stack_size;
-    PROVIDE( _sp = . );
-  } >ram AT>ram :ram
-}

hello-world/bsp/env/coreip-e2-arty/tim.lds

@@ -1,161 +0,0 @@
-OUTPUT_ARCH( "riscv" )
-
-ENTRY( _start )
-
-MEMORY
-{
-  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 64K
-}
-
-PHDRS
-{
-  ram PT_LOAD;
-  ram_init PT_LOAD;
-  ram PT_NULL;
-}
-
-SECTIONS
-{
-  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
-
-  .init           :
-  {
-    KEEP (*(SORT_NONE(.init)))
-  } >ram AT>ram :ram
-
-  .text           :
-  {
-    *(.text.unlikely .text.unlikely.*)
-    *(.text.startup .text.startup.*)
-    *(.text .text.*)
-    *(.gnu.linkonce.t.*)
-  } >ram AT>ram :ram
-
-  .fini           :
-  {
-    KEEP (*(SORT_NONE(.fini)))
-  } >ram AT>ram :ram
-
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-
-  .rodata         :
-  {
-    *(.rdata)
-    *(.rodata .rodata.*)
-    *(.gnu.linkonce.r.*)
-  } >ram AT>ram :ram
-
-  . = ALIGN(4);
-
-  .preinit_array  :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } >ram AT>ram :ram
-
-  .init_array     :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
-    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } >ram AT>ram :ram
-
-  .fini_array     :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
-    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } >ram AT>ram :ram
-
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } >ram AT>ram :ram
-
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } >ram AT>ram :ram
-
-  .lalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data_lma = . );
-  } >ram AT>ram :ram
-
-  .dalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data = . );
-  } >ram AT>ram :ram_init
-
-  .data          :
-  {
-    *(.data .data.*)
-    *(.gnu.linkonce.d.*)
-    . = ALIGN(8);
-    PROVIDE( __global_pointer$ = . + 0x800 );
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-    . = ALIGN(8);
-    *(.srodata.cst16)
-    *(.srodata.cst8)
-    *(.srodata.cst4)
-    *(.srodata.cst2)
-    *(.srodata .srodata.*)
-  } >ram AT>ram :ram_init
-
-  . = ALIGN(4);
-  PROVIDE( _edata = . );
-  PROVIDE( edata = . );
-
-  PROVIDE( _fbss = . );
-  PROVIDE( __bss_start = . );
-  .bss            :
-  {
-    *(.sbss*)
-    *(.gnu.linkonce.sb.*)
-    *(.bss .bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN(4);
-  } >ram AT>ram :ram
-
-  . = ALIGN(8);
-  PROVIDE( _end = . );
-  PROVIDE( end = . );
-
-  .stack :
-  {
-    . = ALIGN(8);
-    . += __stack_size;
-    PROVIDE( _sp = . );
-    PROVIDE( _heap_end = . );
-  } >ram AT>ram :ram
-}

hello-world/bsp/env/coreplexip-arty.h

@@ -1,102 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_COREPLEXIP_ARTY_H
-#define _SIFIVE_COREPLEXIP_ARTY_H
-
-#include <stdint.h>
-
-/****************************************************************************
- * GPIO Connections
- *****************************************************************************/
-
-// These are the GPIO bit offsets for the directly driven
-// RGB LEDs on the Freedom Exx Coreplex IP Evaluation Arty FPGA Dev Kit.
-// Additional RGB LEDs are driven by the 3 PWM outputs.
-
-#define RED_LED_OFFSET   0
-#define GREEN_LED_OFFSET 1
-#define BLUE_LED_OFFSET  2
-
-// Switch 3 is used as a GPIO input. (Switch 0 is used to set
-// the reset vector, the other switches are unused).
-
-#define SW_3_OFFSET      3
-
-// These are the buttons which are mapped as inputs.
-
-#define HAS_BOARD_BUTTONS
-
-#define BUTTON_0_OFFSET  4
-#define BUTTON_1_OFFSET  5
-#define BUTTON_2_OFFSET  6
-#define BUTTON_3_OFFSET  7
-
-// These are the bit offsets for the different GPIO pins
-// mapped onto the PMOD A header.
-
-#define JA_0_OFFSET 8
-#define JA_1_OFFSET 9
-#define JA_2_OFFSET 10
-#define JA_3_OFFSET 11
-#define JA_4_OFFSET 12
-#define JA_5_OFFSET 13
-#define JA_6_OFFSET 14
-#define JA_7_OFFSET 15
-
-// The below gives a mapping between global interrupt
-// sources and their number. Note that on the coreplex
-// deliverable, the io_global_interrupts go directly into
-// the PLIC. The evaluation image on the FPGA mimics a
-// system with peripheral devices which are driving the
-// global interrupt lines.
-// So, on this image, in order to get an interrupt from
-// e.g. pressing BUTTON_0:
-// 1) Steps which are external to the delivery coreplex:
-//   a) The corresponding GPIO pin must be configured as in input
-//   b) The "interrupt on fall" bit must be set for the GPIO pin
-// 2) Steps which would also need to be performed for the delivery coreplex:
-//   a) The corresponding global interrupt, priority, and threshold must be configured in the PLIC.
-//   b) The external interrupt bit must be enabled in MSTATUS
-//   c) Interrupts must be enabled globally in the core.
-
-// Any of the above GPIO pins can be used as global interrupt
-// sources by adding their offset to the INT_GPIO_BASE.
-// For example, the buttons are shown here:
-
-#define INT_DEVICE_BUTTON_0 (GPIO_INT_BASE + BUTTON_0_OFFSET)
-#define INT_DEVICE_BUTTON_1 (GPIO_INT_BASE + BUTTON_1_OFFSET)
-#define INT_DEVICE_BUTTON_2 (GPIO_INT_BASE + BUTTON_2_OFFSET)
-#define INT_DEVICE_BUTTON_3 (GPIO_INT_BASE + BUTTON_3_OFFSET)
-
-// In addition, the Switches are mapped directly to
-// the PLIC (without going through the GPIO Peripheral).
-
-#define INT_EXT_DEVICE_SW_0 (EXTERNAL_INT_BASE + 0)
-#define INT_EXT_DEVICE_SW_1 (EXTERNAL_INT_BASE + 1)
-#define INT_EXT_DEVICE_SW_2 (EXTERNAL_INT_BASE + 2)
-#define INT_EXT_DEVICE_SW_3 (EXTERNAL_INT_BASE + 3)
-
-// This gives the mapping from inputs to LOCAL interrupts.
-
-#define LOCAL_INT_SW_0   0 
-#define LOCAL_INT_SW_1   1
-#define LOCAL_INT_SW_2   2 
-#define LOCAL_INT_SW_3   3
-#define LOCAL_INT_BTN_0  4
-#define LOCAL_INT_BTN_1  5
-#define LOCAL_INT_BTN_2  6
-#define LOCAL_INT_BTN_3  7
-#define LOCAL_INT_JA_0   8
-#define LOCAL_INT_JA_1   9
-#define LOCAL_INT_JA_2   10
-#define LOCAL_INT_JA_3   11
-#define LOCAL_INT_JA_4   12
-#define LOCAL_INT_JA_5   13
-#define LOCAL_INT_JA_6   14
-#define LOCAL_INT_JA_7   15
-
-#define RTC_FREQ 32768
-
-void write_hex(int fd, unsigned long int hex);
-
-#endif /* _SIFIVE_COREPLEXIP_ARTY_H */

hello-world/bsp/env/coreplexip-e31-arty/dhrystone.lds

@@ -1,157 +0,0 @@
-OUTPUT_ARCH( "riscv" )
-
-ENTRY( _start )
-
-MEMORY
-{
-  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
-  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
-}
-
-PHDRS
-{
-  flash PT_LOAD;
-  ram_init PT_LOAD;
-  ram PT_NULL;
-}
-
-SECTIONS
-{
-  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
-
-  .init           :
-  {
-    KEEP (*(SORT_NONE(.init)))
-  } >flash AT>flash :flash
-
-  .text           :
-  {
-    *(.text.unlikely .text.unlikely.*)
-    *(.text.startup .text.startup.*)
-    *(.text .text.*)
-    *(.gnu.linkonce.t.*)
-  } >flash AT>flash :flash
-
-  .fini           :
-  {
-    KEEP (*(SORT_NONE(.fini)))
-  } >flash AT>flash :flash
-
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-
-  . = ALIGN(4);
-
-  .preinit_array  :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } >flash AT>flash :flash
-
-  .init_array     :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
-    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } >flash AT>flash :flash
-
-  .fini_array     :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
-    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } >flash AT>flash :flash
-
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } >flash AT>flash :flash
-
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } >flash AT>flash :flash
-
-  .lalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data_lma = . );
-  } >flash AT>flash :flash
-
-  .dalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data = . );
-  } >ram AT>flash :ram_init
-
-  .data          :
-  {
-    *(.rdata)
-    *(.rodata .rodata.*)
-    *(.gnu.linkonce.r.*)
-    *(.data .data.*)
-    *(.gnu.linkonce.d.*)
-    . = ALIGN(8);
-    PROVIDE( __global_pointer$ = . + 0x800 );
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-    . = ALIGN(8);
-    *(.srodata.cst16)
-    *(.srodata.cst8)
-    *(.srodata.cst4)
-    *(.srodata.cst2)
-    *(.srodata .srodata.*)
-  } >ram AT>flash :ram_init
-
-  . = ALIGN(4);
-  PROVIDE( _edata = . );
-  PROVIDE( edata = . );
-
-  PROVIDE( _fbss = . );
-  PROVIDE( __bss_start = . );
-  .bss            :
-  {
-    *(.sbss*)
-    *(.gnu.linkonce.sb.*)
-    *(.bss .bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN(4);
-  } >ram AT>ram :ram
-
-  . = ALIGN(8);
-  PROVIDE( _end = . );
-  PROVIDE( end = . );
-
-  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
-  {
-    PROVIDE( _heap_end = . );
-    . = __stack_size;
-    PROVIDE( _sp = . );
-  } >ram AT>ram :ram
-}

hello-world/bsp/env/coreplexip-e31-arty/flash.lds

@@ -1,161 +0,0 @@
-OUTPUT_ARCH( "riscv" )
-
-ENTRY( _start )
-
-MEMORY
-{
-  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
-  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
-}
-
-PHDRS
-{
-  flash PT_LOAD;
-  ram_init PT_LOAD;
-  ram PT_NULL;
-}
-
-SECTIONS
-{
-  __stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
-
-  .init           :
-  {
-    KEEP (*(SORT_NONE(.init)))
-  } >flash AT>flash :flash
-
-  .text           :
-  {
-    *(.text.unlikely .text.unlikely.*)
-    *(.text.startup .text.startup.*)
-    *(.text .text.*)
-    *(.gnu.linkonce.t.*)
-  } >flash AT>flash :flash
-
-  .fini           :
-  {
-    KEEP (*(SORT_NONE(.fini)))
-  } >flash AT>flash :flash
-
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-
-  .rodata         :
-  {
-    *(.rdata)
-    *(.rodata .rodata.*)
-    *(.gnu.linkonce.r.*)
-  } >flash AT>flash :flash
-
-  . = ALIGN(4);
-
-  .preinit_array  :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } >flash AT>flash :flash
-
-  .init_array     :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
-    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } >flash AT>flash :flash
-
-  .fini_array     :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
-    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } >flash AT>flash :flash
-
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } >flash AT>flash :flash
-
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } >flash AT>flash :flash
-
-  .lalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data_lma = . );
-  } >flash AT>flash :flash
-
-  .dalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data = . );
-  } >ram AT>flash :ram_init
-
-  .data          :
-  {
-    *(.data .data.*)
-    *(.gnu.linkonce.d.*)
-    . = ALIGN(8);
-    PROVIDE( __global_pointer$ = . + 0x800 );
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-    . = ALIGN(8);
-    *(.srodata.cst16)
-    *(.srodata.cst8)
-    *(.srodata.cst4)
-    *(.srodata.cst2)
-    *(.srodata .srodata.*)
-  } >ram AT>flash :ram_init
-
-  . = ALIGN(4);
-  PROVIDE( _edata = . );
-  PROVIDE( edata = . );
-
-  PROVIDE( _fbss = . );
-  PROVIDE( __bss_start = . );
-  .bss            :
-  {
-    *(.sbss*)
-    *(.gnu.linkonce.sb.*)
-    *(.bss .bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN(4);
-  } >ram AT>ram :ram
-
-  . = ALIGN(8);
-  PROVIDE( _end = . );
-  PROVIDE( end = . );
-
-  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
-  {
-    PROVIDE( _heap_end = . );
-    . = __stack_size;
-    PROVIDE( _sp = . );
-  } >ram AT>ram :ram
-}

hello-world/bsp/env/coreplexip-e31-arty/init.c

@@ -1,122 +0,0 @@
-//See LICENSE for license details.
-#include <stdint.h>
-#include <stdio.h>
-#include <unistd.h>
-
-#include "platform.h"
-#include "encoding.h"
-
-#define CPU_FREQ 65000000
-#define XSTR(x) #x
-#define STR(x) XSTR(x)
-
-#ifndef VECT_IRQ
-  #define TRAP_ENTRY trap_entry
-#else
-  #define TRAP_ENTRY vtrap_entry
-#endif
-
-extern int main(int argc, char** argv);
-extern void TRAP_ENTRY();
-
-unsigned long get_cpu_freq()
-{
-  return CPU_FREQ;
-}
-
-unsigned long get_timer_freq()
-{
-  return get_cpu_freq();
-}
-
-uint64_t get_timer_value()
-{
-#if __riscv_xlen == 32
-  while (1) {
-    uint32_t hi = read_csr(mcycleh);
-    uint32_t lo = read_csr(mcycle);
-    if (hi == read_csr(mcycleh))
-      return ((uint64_t)hi << 32) | lo;
-  }
-#else
-  return read_csr(mcycle);
-#endif
-}
-
-static void uart_init(size_t baud_rate)
-{
-  UART0_REG(UART_REG_DIV) = (get_cpu_freq() / 2) / baud_rate - 1;
-  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
-}
-
-
-#ifdef USE_PLIC
-extern void handle_m_ext_interrupt();
-#endif
-
-#ifdef USE_M_TIME
-extern void handle_m_time_interrupt();
-#endif
-
-#ifdef USE_LOCAL_ISR
-typedef void (*my_interrupt_function_ptr_t) (void);
-extern my_interrupt_function_ptr_t localISR[];
-#endif
-
-#ifndef VECT_IRQ
-uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc) __attribute__((noinline));
-uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
-{
-  if (0){
-#ifdef USE_PLIC
-    // External Machine-Level interrupt from PLIC
-  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
-    handle_m_ext_interrupt();
-#endif
-#ifdef USE_M_TIME
-    // External Machine-Level interrupt from PLIC
-  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
-    handle_m_time_interrupt();
-#endif
-#ifdef USE_LOCAL_ISR
-  } else if (mcause & MCAUSE_INT) {
-    localISR[mcause & MCAUSE_CAUSE] ();
-#endif
-  }
-  else {
-    write(1, "Unhandled Trap:\n", 16);
-    _exit(1 + mcause);
-  }
-  return epc;
-}
-#endif 
-
-#ifdef USE_CLIC
-void trap_entry(void) __attribute__((interrupt("SiFive-CLIC-preemptible"), aligned(64)));
-void trap_entry(void)
-{
-  unsigned long mcause = read_csr(mcause);
-  unsigned long mepc = read_csr(mepc);
-  handle_trap(mcause, mepc);
-}
-#endif
-
-void _init()
-{
-  #ifndef NO_INIT
-  uart_init(115200);
-
-  puts("core freq at " STR(CPU_FREQ) " Hz\n");
-
-#ifdef USE_CLIC
-  write_csr(mtvec, ((unsigned long)&trap_entry | MTVEC_CLIC));
-#else
-  write_csr(mtvec, ((unsigned long)&TRAP_ENTRY | MTVEC_VECTORED));
-#endif
-
-  #endif
-}
-
-void _fini()
-{
-}

hello-world/bsp/env/coreplexip-e31-arty/openocd.cfg

@@ -1,31 +0,0 @@
-# JTAG adapter setup
-adapter_khz     10000
-
-interface ftdi
-ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
-ftdi_vid_pid 0x15ba 0x002a
-
-ftdi_layout_init 0x0808 0x0a1b
-ftdi_layout_signal nSRST -oe 0x0200
-#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
-ftdi_layout_signal LED -data 0x0800
-
-set _CHIPNAME riscv
-jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
-
-set _TARGETNAME $_CHIPNAME.cpu
-
-target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
-$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
-
-# Un-comment these two flash lines if you have a SPI flash and want to write
-# it.
-flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
-init
-if {[ info exists pulse_srst]} {
-  ftdi_set_signal nSRST 0
-  ftdi_set_signal nSRST z
-}
-halt
-#flash protect 0 64 last off
-echo "Ready for Remote Connections"

hello-world/bsp/env/coreplexip-e31-arty/platform.h

@@ -1,100 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_PLATFORM_H
-#define _SIFIVE_PLATFORM_H
-
-// Some things missing from the official encoding.h
-
-#if __riscv_xlen == 32
-#define MCAUSE_INT         0x80000000UL
-#define MCAUSE_CAUSE       0x000003FFUL
-#else
-#define MCAUSE_INT         0x8000000000000000UL
-#define MCAUSE_CAUSE       0x00000000000003FFUL
-#endif
-
-#ifdef VECT_IRQ
-    #define MTVEC_VECTORED     0x01
-#else 
-    #define MTVEC_VECTORED     0x00
-#endif
-#define MTVEC_CLIC             0x02
-#define IRQ_M_LOCAL        16
-#define MIP_MLIP(x)        (1 << (IRQ_M_LOCAL + x))
-
-#include "sifive/const.h"
-#include "sifive/devices/clint.h"
-#include "sifive/devices/gpio.h"
-#include "sifive/devices/plic.h"
-#include "sifive/devices/pwm.h"
-#include "sifive/devices/spi.h"
-#include "sifive/devices/uart.h"
-
-/****************************************************************************
- * Platform definitions
- *****************************************************************************/
-
-// Memory map
-#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
-#define GPIO_CTRL_ADDR _AC(0x20002000,UL)
-#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
-#define PWM0_CTRL_ADDR _AC(0x20005000,UL)
-#define RAM_MEM_ADDR _AC(0x80000000,UL)
-#define RAM_MEM_SIZE _AC(0x10000,UL)
-#define SPI0_CTRL_ADDR _AC(0x20004000,UL)
-#define SPI0_MEM_ADDR _AC(0x40000000,UL)
-#define SPI0_MEM_SIZE _AC(0x20000000,UL)
-#define TESTBENCH_MEM_ADDR _AC(0x20000000,UL)
-#define TESTBENCH_MEM_SIZE _AC(0x10000000,UL)
-#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
-#define UART0_CTRL_ADDR _AC(0x20000000,UL)
-
-// IOF masks
-
-// Interrupt numbers
-#define RESERVED_INT_BASE 0
-#define UART0_INT_BASE 1
-#define EXTERNAL_INT_BASE 2
-#define SPI0_INT_BASE 6
-#define GPIO_INT_BASE 7
-#define PWM0_INT_BASE 23
-
-// Helper functions
-#define _REG64(p, i) (*(volatile uint64_t *)((p) + (i)))
-#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
-#define _REG16(p, i) (*(volatile uint16_t *)((p) + (i)))
-// Bulk set bits in `reg` to either 0 or 1.
-// E.g. SET_BITS(MY_REG, 0x00000007, 0) would generate MY_REG &= ~0x7
-// E.g. SET_BITS(MY_REG, 0x00000007, 1) would generate MY_REG |= 0x7
-#define SET_BITS(reg, mask, value) if ((value) == 0) { (reg) &= ~(mask); } else { (reg) |= (mask); }
-#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
-#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
-#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
-#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
-#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
-#define TRAPVEC_TABLE_REG(offset) _REG32(TRAPVEC_TABLE_CTRL_ADDR, offset)
-#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
-#define CLINT_REG64(offset) _REG64(CLINT_CTRL_ADDR, offset)
-#define GPIO_REG64(offset) _REG64(GPIO_CTRL_ADDR, offset)
-#define PLIC_REG64(offset) _REG64(PLIC_CTRL_ADDR, offset)
-#define PWM0_REG64(offset) _REG64(PWM0_CTRL_ADDR, offset)
-#define SPI0_REG64(offset) _REG64(SPI0_CTRL_ADDR, offset)
-#define TRAPVEC_TABLE_REG64(offset) _REG64(TRAPVEC_TABLE_CTRL_ADDR, offset)
-#define UART0_REG64(offset) _REG64(UART0_CTRL_ADDR, offset)
-
-// Misc
-
-#define NUM_GPIO 16
-
-#define PLIC_NUM_INTERRUPTS 28
-#define PLIC_NUM_PRIORITIES 7
-
-#define HAS_BOARD_BUTTONS
-
-#include "coreplexip-arty.h"
-
-unsigned long get_cpu_freq(void);
-unsigned long get_timer_freq(void);
-uint64_t get_timer_value(void);
-
-#endif /* _SIFIVE_PLATFORM_H */

hello-world/bsp/env/coreplexip-e31-arty/scratchpad.lds

@@ -1,161 +0,0 @@
-OUTPUT_ARCH( "riscv" )
-
-ENTRY( _start )
-
-MEMORY
-{
-  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
-}
-
-PHDRS
-{
-  ram PT_LOAD;
-  ram_init PT_LOAD;
-  ram PT_NULL;
-}
-
-SECTIONS
-{
-  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
-
-  .init           :
-  {
-    KEEP (*(SORT_NONE(.init)))
-  } >ram AT>ram :ram
-
-  .text           :
-  {
-    *(.text.unlikely .text.unlikely.*)
-    *(.text.startup .text.startup.*)
-    *(.text .text.*)
-    *(.gnu.linkonce.t.*)
-  } >ram AT>ram :ram
-
-  .fini           :
-  {
-    KEEP (*(SORT_NONE(.fini)))
-  } >ram AT>ram :ram
-
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-
-  .rodata         :
-  {
-    *(.rdata)
-    *(.rodata .rodata.*)
-    *(.gnu.linkonce.r.*)
-  } >ram AT>ram :ram
-
-  . = ALIGN(4);
-
-  .preinit_array  :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } >ram AT>ram :ram
-
-  .init_array     :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
-    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } >ram AT>ram :ram
-
-  .fini_array     :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
-    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } >ram AT>ram :ram
-
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } >ram AT>ram :ram
-
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } >ram AT>ram :ram
-
-  .lalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data_lma = . );
-  } >ram AT>ram :ram
-
-  .dalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data = . );
-  } >ram AT>ram :ram_init
-
-  .data          :
-  {
-    *(.data .data.*)
-    *(.gnu.linkonce.d.*)
-    . = ALIGN(8);
-    PROVIDE( __global_pointer$ = . + 0x800 );
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-    . = ALIGN(8);
-    *(.srodata.cst16)
-    *(.srodata.cst8)
-    *(.srodata.cst4)
-    *(.srodata.cst2)
-    *(.srodata .srodata.*)
-  } >ram AT>ram :ram_init
-
-  . = ALIGN(4);
-  PROVIDE( _edata = . );
-  PROVIDE( edata = . );
-
-  PROVIDE( _fbss = . );
-  PROVIDE( __bss_start = . );
-  .bss            :
-  {
-    *(.sbss*)
-    *(.gnu.linkonce.sb.*)
-    *(.bss .bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN(4);
-  } >ram AT>ram :ram
-
-  . = ALIGN(8);
-  PROVIDE( _end = . );
-  PROVIDE( end = . );
-
-  .stack :
-  {
-    . = ALIGN(8);
-    . += __stack_size;
-    PROVIDE( _sp = . );
-    PROVIDE( _heap_end = . );
-  } >ram AT>ram :ram
-}

hello-world/bsp/env/coreplexip-e31-arty/settings.mk

@@ -1,3 +0,0 @@
-# Describes the CPU on this board to the rest of the SDK.
-RISCV_ARCH := rv32imac
-RISCV_ABI  := ilp32

hello-world/bsp/env/coreplexip-e51-arty/dhrystone.lds

@@ -1,157 +0,0 @@
-OUTPUT_ARCH( "riscv" )
-
-ENTRY( _start )
-
-MEMORY
-{
-  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
-  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
-}
-
-PHDRS
-{
-  flash PT_LOAD;
-  ram_init PT_LOAD;
-  ram PT_NULL;
-}
-
-SECTIONS
-{
-  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
-
-  .init           :
-  {
-    KEEP (*(SORT_NONE(.init)))
-  } >flash AT>flash :flash
-
-  .text           :
-  {
-    *(.text.unlikely .text.unlikely.*)
-    *(.text.startup .text.startup.*)
-    *(.text .text.*)
-    *(.gnu.linkonce.t.*)
-  } >flash AT>flash :flash
-
-  .fini           :
-  {
-    KEEP (*(SORT_NONE(.fini)))
-  } >flash AT>flash :flash
-
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-
-  . = ALIGN(4);
-
-  .preinit_array  :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } >flash AT>flash :flash
-
-  .init_array     :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
-    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } >flash AT>flash :flash
-
-  .fini_array     :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
-    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } >flash AT>flash :flash
-
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } >flash AT>flash :flash
-
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } >flash AT>flash :flash
-
-  .lalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data_lma = . );
-  } >flash AT>flash :flash
-
-  .dalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data = . );
-  } >ram AT>flash :ram_init
-
-  .data          :
-  {
-    *(.rdata)
-    *(.rodata .rodata.*)
-    *(.gnu.linkonce.r.*)
-    *(.data .data.*)
-    *(.gnu.linkonce.d.*)
-    . = ALIGN(8);
-    PROVIDE( __global_pointer$ = . + 0x800 );
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-    . = ALIGN(8);
-    *(.srodata.cst16)
-    *(.srodata.cst8)
-    *(.srodata.cst4)
-    *(.srodata.cst2)
-    *(.srodata .srodata.*)
-  } >ram AT>flash :ram_init
-
-  . = ALIGN(4);
-  PROVIDE( _edata = . );
-  PROVIDE( edata = . );
-
-  PROVIDE( _fbss = . );
-  PROVIDE( __bss_start = . );
-  .bss            :
-  {
-    *(.sbss*)
-    *(.gnu.linkonce.sb.*)
-    *(.bss .bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN(4);
-  } >ram AT>ram :ram
-
-  . = ALIGN(8);
-  PROVIDE( _end = . );
-  PROVIDE( end = . );
-
-  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
-  {
-    PROVIDE( _heap_end = . );
-    . = __stack_size;
-    PROVIDE( _sp = . );
-  } >ram AT>ram :ram
-}

hello-world/bsp/env/coreplexip-e51-arty/flash.lds

@@ -1,161 +0,0 @@
-OUTPUT_ARCH( "riscv" )
-
-ENTRY( _start )
-
-MEMORY
-{
-  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
-  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
-}
-
-PHDRS
-{
-  flash PT_LOAD;
-  ram_init PT_LOAD;
-  ram PT_NULL;
-}
-
-SECTIONS
-{
-  __stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
-
-  .init           :
-  {
-    KEEP (*(SORT_NONE(.init)))
-  } >flash AT>flash :flash
-
-  .text           :
-  {
-    *(.text.unlikely .text.unlikely.*)
-    *(.text.startup .text.startup.*)
-    *(.text .text.*)
-    *(.gnu.linkonce.t.*)
-  } >flash AT>flash :flash
-
-  .fini           :
-  {
-    KEEP (*(SORT_NONE(.fini)))
-  } >flash AT>flash :flash
-
-  PROVIDE (__etext = .);
-  PROVIDE (_etext = .);
-  PROVIDE (etext = .);
-
-  .rodata         :
-  {
-    *(.rdata)
-    *(.rodata .rodata.*)
-    *(.gnu.linkonce.r.*)
-  } >flash AT>flash :flash
-
-  . = ALIGN(4);
-
-  .preinit_array  :
-  {
-    PROVIDE_HIDDEN (__preinit_array_start = .);
-    KEEP (*(.preinit_array))
-    PROVIDE_HIDDEN (__preinit_array_end = .);
-  } >flash AT>flash :flash
-
-  .init_array     :
-  {
-    PROVIDE_HIDDEN (__init_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
-    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
-    PROVIDE_HIDDEN (__init_array_end = .);
-  } >flash AT>flash :flash
-
-  .fini_array     :
-  {
-    PROVIDE_HIDDEN (__fini_array_start = .);
-    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
-    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
-    PROVIDE_HIDDEN (__fini_array_end = .);
-  } >flash AT>flash :flash
-
-  .ctors          :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*crtbegin?.o(.ctors))
-    /* We don't want to include the .ctor section from
-       the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  } >flash AT>flash :flash
-
-  .dtors          :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*crtbegin?.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  } >flash AT>flash :flash
-
-  .lalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data_lma = . );
-  } >flash AT>flash :flash
-
-  .dalign         :
-  {
-    . = ALIGN(4);
-    PROVIDE( _data = . );
-  } >ram AT>flash :ram_init
-
-  .data          :
-  {
-    *(.data .data.*)
-    *(.gnu.linkonce.d.*)
-    . = ALIGN(8);
-    PROVIDE( __global_pointer$ = . + 0x800 );
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-    . = ALIGN(8);
-    *(.srodata.cst16)
-    *(.srodata.cst8)
-    *(.srodata.cst4)
-    *(.srodata.cst2)
-    *(.srodata .srodata.*)
-  } >ram AT>flash :ram_init
-
-  . = ALIGN(4);
-  PROVIDE( _edata = . );
-  PROVIDE( edata = . );
-
-  PROVIDE( _fbss = . );
-  PROVIDE( __bss_start = . );
-  .bss            :
-  {
-    *(.sbss*)
-    *(.gnu.linkonce.sb.*)
-    *(.bss .bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . = ALIGN(4);
-  } >ram AT>ram :ram
-
-  . = ALIGN(8);
-  PROVIDE( _end = . );
-  PROVIDE( end = . );
-
-  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
-  {
-    PROVIDE( _heap_end = . );
-    . = __stack_size;
-    PROVIDE( _sp = . );
-  } >ram AT>ram :ram
-}

hello-world/bsp/env/coreplexip-e51-arty/init.c

@@ -1,122 +0,0 @@
-//See LICENSE for license details.
-#include <stdint.h>
-#include <stdio.h>
-#include <unistd.h>
-
-#include "platform.h"
-#include "encoding.h"
-
-#define CPU_FREQ 65000000
-#define XSTR(x) #x
-#define STR(x) XSTR(x)
-
-#ifndef VECT_IRQ
-  #define TRAP_ENTRY trap_entry
-#else
-  #define TRAP_ENTRY vtrap_entry
-#endif
-
-extern int main(int argc, char** argv);
-extern void TRAP_ENTRY();
-
-unsigned long get_cpu_freq()
-{
-  return CPU_FREQ;
-}
-
-unsigned long get_timer_freq()
-{
-  return get_cpu_freq();
-}
-
-uint64_t get_timer_value()
-{
-#if __riscv_xlen == 32
-  while (1) {
-    uint32_t hi = read_csr(mcycleh);
-    uint32_t lo = read_csr(mcycle);
-    if (hi == read_csr(mcycleh))
-      return ((uint64_t)hi << 32) | lo;
-  }
-#else
-  return read_csr(mcycle);
-#endif
-}
-
-static void uart_init(size_t baud_rate)
-{
-  UART0_REG(UART_REG_DIV) = (get_cpu_freq() / 2) / baud_rate - 1;
-  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
-}
-
-
-#ifdef USE_PLIC
-extern void handle_m_ext_interrupt();
-#endif
-
-#ifdef USE_M_TIME
-extern void handle_m_time_interrupt();
-#endif
-
-#ifdef USE_LOCAL_ISR
-typedef void (*my_interrupt_function_ptr_t) (void);
-extern my_interrupt_function_ptr_t localISR[];
-#endif
-
-#ifndef VECT_IRQ
-uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc) __attribute__((noinline));
-uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
-{
-  if (0){
-#ifdef USE_PLIC
-    // External Machine-Level interrupt from PLIC
-  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
-    handle_m_ext_interrupt();
-#endif
-#ifdef USE_M_TIME
-    // External Machine-Level interrupt from PLIC
-  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
-    handle_m_time_interrupt();
-#endif
-#ifdef USE_LOCAL_ISR
-  } else if (mcause & MCAUSE_INT) {
-    localISR[mcause & MCAUSE_CAUSE] ();
-#endif
-  }
-  else {
-    write(1, "Unhandled Trap:\n", 16);
-    _exit(1 + mcause);
-  }
-  return epc;
-}
-#endif 
-
-#ifdef USE_CLIC
-void trap_entry(void) __attribute__((interrupt("SiFive-CLIC-preemptible"), aligned(64)));
-void trap_entry(void)
-{
-  unsigned long mcause = read_csr(mcause);
-  unsigned long mepc = read_csr(mepc);
-  handle_trap(mcause, mepc);
-}
-#endif
-
-void _init()
-{
-  #ifndef NO_INIT
-  uart_init(115200);
-
-  puts("core freq at " STR(CPU_FREQ) " Hz\n");
-
-#ifdef USE_CLIC
-  write_csr(mtvec, ((unsigned long)&trap_entry | MTVEC_CLIC));
-#else
-  write_csr(mtvec, ((unsigned long)&TRAP_ENTRY | MTVEC_VECTORED));
-#endif
-
-  #endif
-}
-
-void _fini()
-{
-}

hello-world/bsp/env/coreplexip-e51-arty/openocd.cfg

@@ -1,31 +0,0 @@
-# JTAG adapter setup
-adapter_khz     10000
-
-interface ftdi
-ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
-ftdi_vid_pid 0x15ba 0x002a
-
-ftdi_layout_init 0x0808 0x0a1b
-ftdi_layout_signal nSRST -oe 0x0200
-#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
-ftdi_layout_signal LED -data 0x0800
-
-set _CHIPNAME riscv
-jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
-
-set _TARGETNAME $_CHIPNAME.cpu
-
-target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
-$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
-
-# Un-comment these two flash lines if you have a SPI flash and want to write
-# it.
-flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
-init
-if {[ info exists pulse_srst]} {
-  ftdi_set_signal nSRST 0
-  ftdi_set_signal nSRST z
-}
-halt
-#flash protect 0 64 last off
-echo "Ready for Remote Connections"

hello-world/bsp/env/coreplexip-e51-arty/platform.h

@@ -1,100 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_PLATFORM_H
-#define _SIFIVE_PLATFORM_H
-
-// Some things missing from the official encoding.h
-
-#if __riscv_xlen == 32
-#define MCAUSE_INT         0x80000000UL
-#define MCAUSE_CAUSE       0x000003FFUL
-#else
-#define MCAUSE_INT         0x8000000000000000UL
-#define MCAUSE_CAUSE       0x00000000000003FFUL
-#endif
-
-#ifdef VECT_IRQ
-    #define MTVEC_VECTORED     0x01
-#else 
-    #define MTVEC_VECTORED     0x00
-#endif
-#define MTVEC_CLIC             0x02
-#define IRQ_M_LOCAL        16
-#define MIP_MLIP(x)        (1 << (IRQ_M_LOCAL + x))
-
-#include "sifive/const.h"
-#include "sifive/devices/clint.h"
-#include "sifive/devices/gpio.h"
-#include "sifive/devices/plic.h"
-#include "sifive/devices/pwm.h"
-#include "sifive/devices/spi.h"
-#include "sifive/devices/uart.h"
-
-/****************************************************************************
- * Platform definitions
- *****************************************************************************/
-
-// Memory map
-#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
-#define GPIO_CTRL_ADDR _AC(0x20002000,UL)
-#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
-#define PWM0_CTRL_ADDR _AC(0x20005000,UL)
-#define RAM_MEM_ADDR _AC(0x80000000,UL)
-#define RAM_MEM_SIZE _AC(0x10000,UL)
-#define SPI0_CTRL_ADDR _AC(0x20004000,UL)
-#define SPI0_MEM_ADDR _AC(0x40000000,UL)
-#define SPI0_MEM_SIZE _AC(0x20000000,UL)
-#define TESTBENCH_MEM_ADDR _AC(0x20000000,UL)
-#define TESTBENCH_MEM_SIZE _AC(0x10000000,UL)
-#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
-#define UART0_CTRL_ADDR _AC(0x20000000,UL)
-
-// IOF masks
-
-// Interrupt numbers
-#define RESERVED_INT_BASE 0
-#define UART0_INT_BASE 1
-#define EXTERNAL_INT_BASE 2
-#define SPI0_INT_BASE 6
-#define GPIO_INT_BASE 7
-#define PWM0_INT_BASE 23
-
-// Helper functions
-#define _REG64(p, i) (*(volatile uint64_t *)((p) + (i)))
-#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
-#define _REG16(p, i) (*(volatile uint16_t *)((p) + (i)))
-// Bulk set bits in `reg` to either 0 or 1.
-// E.g. SET_BITS(MY_REG, 0x00000007, 0) would generate MY_REG &= ~0x7
-// E.g. SET_BITS(MY_REG, 0x00000007, 1) would generate MY_REG |= 0x7
-#define SET_BITS(reg, mask, value) if ((value) == 0) { (reg) &= ~(mask); } else { (reg) |= (mask); }
-#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
-#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
-#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
-#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
-#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
-#define TRAPVEC_TABLE_REG(offset) _REG32(TRAPVEC_TABLE_CTRL_ADDR, offset)
-#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
-#define CLINT_REG64(offset) _REG64(CLINT_CTRL_ADDR, offset)
-#define GPIO_REG64(offset) _REG64(GPIO_CTRL_ADDR, offset)
-#define PLIC_REG64(offset) _REG64(PLIC_CTRL_ADDR, offset)
-#define PWM0_REG64(offset) _REG64(PWM0_CTRL_ADDR, offset)
-#define SPI0_REG64(offset) _REG64(SPI0_CTRL_ADDR, offset)
-#define TRAPVEC_TABLE_REG64(offset) _REG64(TRAPVEC_TABLE_CTRL_ADDR, offset)
-#define UART0_REG64(offset) _REG64(UART0_CTRL_ADDR, offset)
-
-// Misc
-
-#define NUM_GPIO 16
-
-#define PLIC_NUM_INTERRUPTS 28
-#define PLIC_NUM_PRIORITIES 7
-
-#define HAS_BOARD_BUTTONS
-
-#include "coreplexip-arty.h"
-
-unsigned long get_cpu_freq(void);
-unsigned long get_timer_freq(void);
-uint64_t get_timer_value(void);
-
-#endif /* _SIFIVE_PLATFORM_H */