pmp_get() may return an error if the given entry, given by the caller
of is_pmp_entry_mapped(), is invalid. This results in the output
parameters for pmp_get() being uninitialized. To avoid using garbage
values, check the result and return early if necessary.
This issue is not being hit because at the moment
is_pmp_entry_mapped() is only being called from a single site with a
valid hardcoded value.
Signed-off-by: Carlos López <carlos.lopezr4096@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The fwt_hart_state struct inciludes a flexible array member, so its
allocation size will be that of the struct itself, plus that of each
of the members in the array. When calculating this size, instead of
taking the size of the struct, the size of a pointer to it was taken,
which is incorrect. Luckily, this happenned to not produce memory
corruption because the size of the non-flexible members of the struct
is the same as the size of a pointer.
Signed-off-by: Carlos López <carlos.lopezr4096@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In several dbtr functions, we first check that the dbtr trigger is not
NULL and that its state is what we expect. However, it only makes
sense to perform the second check if the dbtr trigger is not NULL.
Othwerwise we will dereference a NULL pointer. Thus, change the
condition so that it shortcuts to the first check if necessary.
Signed-off-by: Carlos López <carlos.lopezr4096@gmail.com>
Reviewed-By: Anup Patel <anup@brainfault.org>
Currently, OpenSBI reserves the upper 16 bits in mhpmevent for
the Sscofpmf extension.
However, according to the Sscofpmf extension specification[1],
it only defines the upper 8 bits in mhpmevent for privilege mode
inhibit and counter overflow disable. Other bits are defined by
the platform for event selection.
Since vendors might define raw event encoding exceeding 48 bits in
mhpmevent, we should adjust the MHPMEVENT_SSCOF_MASK to support it.
Link: https://github.com/riscvarchive/riscv-count-overflow [1]
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Attempting to access the menvcfg CSR raises an illegal instruction
exception on hardware which implements Sm1p11 or older.
Fixes: e9ee9678ba ("lib: sbi: fwft: add support for SBI_FWFT_PTE_AD_HW_UPDATING")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch updates OpenSBI version to 1.5 as part of
release preparation.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Current Debug Trigger SBI extension proposal suggests to activate
shmem area and obtain its physical address from S-mode software
in the following way:
: If both `shmem_phys_lo` and `shmem_phys_hi` parameters are not
: all-ones bitwise then `shmem_phys_lo` specifies the lower XLEN
: bits and `shmem_phys_hi` specifies the upper XLEN bits of the
: shared memory physical base address. The `shmem_phys_lo` MUST
: be `(XLEN / 8)` byte aligned and the size of shared memory is
: assumed to be `trig_max * (XLEN / 2)` bytes.
For more details see the current version of the proposal:
- https://lists.riscv.org/g/tech-debug/message/1302
On the other hand, on RV32, the M-mode can only access the first 4GB of
the physical address space because M-mode does not have MMU to access
full 34-bit physical address space. Similarly, on RV64, the M-mode can
only access memory addressed by 64 bits.
This commit checks shmem address in function sbi_dbtr_setup_shmem
to make sure that shmem_phys_hi part of the valid address is zero.
Besides, the macro DBTR_SHMEM_MAKE_PHYS is updated to take into
account only low XLEN part.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Error code returned by the ecall handles should use the defines from
sbi_ecall_interface.h rather than sbi_error.h.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As stated by the spec and pointed out by Andrew Jones, the value passed
for MISALIGNED_EXC_DELEG and PTE_AD_HW_UPDATING should be either 0 or 1.
Add check for these values and return SBI_EINVAL if not.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The SBI FWFT extension defines a set of function that can be called
to control the configuration of some platform features (misaligned
trap delegation, etc). This patch implements sbi_fwft_set() and
sbi_fwft_get() as defined in the specification [1].
Link: https://lists.riscv.org/g/tech-prs/message/924 [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add support for SBI_FWFT_PTE_AD_HW_UPDATING based on SVADU presence.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add support for SBI_FWFT_MISALIGNED_EXC_DELEG withing FWFT support. This
support allows to delegate misaligned accesses traps.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add support for Svade and Svadu extensions. When both are present in the
device tree, the M-mode firmware should select the Svade extension
to comply with the RVA23 profile, which mandates Svade and lists Svadu as
an optional extension.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Like PMP, the behaviors to configure PMA will be different from
RV64 and RV32. RV64 uses two Andes custom CSRs, pmacfg0 and pmacfg2,
but RV32 uses four Andes custom CSRs, pmacfg0 ~ pmacfg3. This patch
adds support to PMA for RV32.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch refines the Andes PMA related code. The main change is
refactor andes_pma_[read|write]_cfg() and andes_pma_[read|write]_addr()
into new functions andes_pma_[read|write]_num().
Also, fix some coding style problems.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When used to read characters from the terminal (e.g., when the SBI
console is used via ecall from linux with `console=hvc0`), we must
acknowledge receipt of each character to "pop" it off the LiteUART
hardware queue, and allow the next character to be made available.
Fixes: 52af6e4b ("lib: utils: Add LiteX UART support")
Suggested-by: Dolu1990 <charles.papon.90@gmail.com>
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In DT, multiple reset devices may use the same driver, and they
may have different priorities. If rc is returned after the first
initialization, the highest priority device may be lost.
Fixes: a73ff043e9 (lib: utils/reset: Fix fdt_reset to search for more dt nodes)
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If there are multiple dt nodes, the previous code only tries to match
the first one, which may lose initialization.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When the dt node has a status property and the value is not ok or
okay, skip initializing reset.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If there are multiple dt nodes, the previous code only tries to match
the first one, which may lose initialization.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When the dt node has a status property and the value is not ok or
okay, skip initializing serial.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When the dt node has a status property and the value is not ok or
okay, skip initializing irqchip.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When the dt node has a status property and the value is not ok or
okay, skip initializing timer.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When the dt node has a status property and the value is not ok or
okay, skip initializing ipi.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
During Linux AIA driver review, the APLIC DT property for interrupt
delegation was renamed to "riscv,delegation" so let's use the new DT
property name and fallback to old DT property name if the new DT
property name is not available.
Fixes: 34612193af ("lib: utils/irqchip: Add FDT based driver for APLIC")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
"gpio-poweroff" and "gpio-restart" always set gpio to high to
active the function, but some chips need a low signal to active.
Fortunately, it can be achieved by setting GPIO_FLAG_ACTIVE_LOW
for the gpio. Implement this flag support for the gpio library
so the gpio reset can function well.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The spec states that a6, a7, flags and sepc are writable but the
implementation was not allowing that. Add support for these 4 writable
attributes.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add extra sanity checks to prevent the caller getting the invalid result from
imsic_get_data() or imsic_get_target_file() when imsic is not initialized
correctly.
Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Bring back FW_TEXT_START as an optional parameter to allow users
explicitly specify compile time address for loading debug symbols.
When not specified, the FW_TEXT_START is assumed to be 0.
Fixes: d4d2582eef ("firmware: remove FW_TEXT_START")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Clément Léger <cleger@rivosinc.com>
The current mlevel imsic check is only for the platform, which
may cause hart without imsic in the platform to trigger an
illegal instruction exception when initializing imsic. For
example, the platform contains a management hart that only
supports wired interrupts.
This patch will check if each hart supports Smaia extension
before doing imsic initialization to avoid triggering illegal
instruction exceptions.
Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The Sophgo CV18XX/SG200X series SoCs have a standard C906
core. Add support for it.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the sbi_sse_exit() gets event in a loop but does not put
it back after use. This results in global events remaining locked
causing hangs on sub-sequent calls to sse_event_get() for global
events.
Fixes: c8cdf01d8f ("lib: sbi: Add support for Supervisor Software Events extension")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
SG2042 uses an onboard MCU to provide reset function.
Add reset driver to support this onboard MCU.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The inline function can simplify the code by setting some call
restrictions. This ensures logical smoothness
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Modify the return value of the sbi_dbtr_shmem_disabled function to
bool to make the semantics clearer.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The previous code detected shmem_phys_hi and shmem_phys_lo as two
addresses. fix this bug
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Obtaining a 64-bit address under rv64 does not require combining
32-bit registers
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
After getting hart_shmem_base, dbtr_thishart_state_ptr cannot be
empty. So remove check code.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
When only phys_hi is equal to SBI_DBTR_SHMEM_INVALID_ADDR, it may be
a legal address. The old code would modify the legal address.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
As Guo Ren said from the kernel mailing list [1], future T-Head CPUs,
including the newer versions of T-Head C908, will feature standard
Sscofpmf extension. For these CPUs, T-Head's implementation of PMU
Overflow Interrupts may not needed anymore. In this case, we shouldn't
apply T-Head PMU for all T-Head CPUs. Thus, this patch separated T-Head PMU
errata.
[1] https://lore.kernel.org/linux-riscv/Zh9sUUUT09LZb0MO@gmail.com/
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
To make the framework suit all Andes CPUs, change all occurrences of
andes45 to andes.
In addition, we fix some coding style problems and remove an unused
macro in andes.h.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add spinlock protection to avoid race condition on assigned_harts
during domain context switching. Also, rename/add variables for
accessing the corresponding domain of target/current context.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Although Mstatus.MPV is set, before executing mret, access to VS mode
registers should use the actual register addresses, not the pseudonyms
of S registers.
Signed-off-by: Pope B.Lei <popeblei@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When registering an SSE event, check for the handler_entry_pc to belong
to supervisor mode domain using sbi_domain_check_addr_range().
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Rather then passing 1 to sbi_domain_check_addr_range() for supervisor
mode, use PRV_S.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Move the enable callback call before sending the IPI. Even though the
event is locked and no race condition can happen, this is more logical.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The list loop below that check is actually not looping if the list is
empty so there was no need for this check.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Rather than checking 32bits overflow with some absolute value, check the
value to be different from the cast itself.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
There was a naming incoherency between enabled events list lock/unlock.
Rename sse_hart_unlock() to sse_enabled_event_unlock() to be coherent
and reword comments above lock()/unlock() functions.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Implement the test which covers some of the functions from the
`riscv_locks.h` file. This test consists of 3 test cases:
1) For lock/unlock functions
2) Unsuccessful trylock (the lock was previously taken)
3) Successful trylock (the lock is free and can be taken)
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Implement the test which covers some of the functions from the
`riscv_atomic.h` header file. The test contains 9 test cases:
1) atomic read/write test
2) add/return test
3) sub/return test
4) cmpxchg test
5) atomic_xchg test
6) atomic_raw_set_bit test
7) atomic_raw_clear_bit test
8) atomic_set_bit test
9) atomic_clear_bit test
Some of the test cases operate on the `test_atomic` variable. It gets
initialized in the suite init function.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Allow to define an init function for the test suite. It could help us
to initialize global variable once, and use them in multiple test cases
after the initialization.
For instance, if multiple test cases use the same atomic_t var, it
could be helpful to call ATOMIC_INIT once during the suite
initialization.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now opensbi can run at any address via dynamic relocation. We can
remove FW_TEXT_START.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
After calling fdt_node_offset_by_compatible() we must check its return
value and not an unrelated value.
Addresses-Coverity-ID: 1584993 Logically dead code
Fixes: 67ce5a763c ("platform: generic: Add support for specify coldboot harts in DT")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sse_event_get() may return NULL. We should not dereference the return value
in sbi_sse_exit() without checking.
Fixes: c8cdf01d8f ("lib: sbi: Add support for Supervisor Software Events extension")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_hart_ext[] array is missing these two extensions ids. It is
expected that this array contains all the extensions declaration at the
same index of the SBI_HART_EXT_* define. Without this, when adding a new
extension, there is a mismatch between ids and extension names and it
can even display corrupted extension names.
Addresses-Coverity-ID: 1584994 Out-of-bounds read
Fixes: 6bb6b61c27 ("lib: sbi: Add support for smcsrind and smcdeleg")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The rule included from auto.conf.cmd adds a dependency on every Kconfig
file, so these two Kconfig files do not need to be specified again here.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
The .config file may be manually edited or copied from another location.
Since genconfig.py is responsible for generating auto.conf (the Makefile
fragment) and autoconf.h (the C header) from .config, it must be run any
time .config changes, not just when running menuconfig.
Fixes: 662e631cce ("Makefile: Add initial kconfig support for each platform")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
SCOUNTEREN and SENVCFG may not be supported on certain RISC-V core,
so check the existence of these CSRs via privilege spec version to
prevent illegal instructions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, all non-coldboot HARTs busy spin in wait_for_coldboot()
until the entire coldboot init sequence is completed.
This means:
1) On QEMU, all non-coldboot HARTs will eat host CPU time and
also slow down the coldboot HART until the entire coldboot
init sequence is completed.
2) On real HW, all non-coldboot HARTs will consume more CPU
power until the entire coldboot init sequence is completed.
To address this, wake up all non-coldboot HARTs as early as
possible in the coldboot init sequence.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
On QEMU virt machine with large number of HARTs, some of the HARTs
randomly fail to come out of wait_for_coldboot() due to one of the
following race-conditions:
1) Failing HARTs are not able to acquire the coldboot_lock and
update the coldboot_hartmask in wait_for_coldboot() before
the coldboot HART acquires the coldboot_lock and sends IPI
in wake_coldboot_harts() hence the failing HARTs never
receive IPI from the coldboot HART.
2) Failing HARTs acquire the coldbood_lock and update the
coldboot_hartmask before coldboot HART does sbi_scratch_init()
so the sbi_hartmask_set_hartid() does not update the
coldboot_hartmask on the failing HARTs hence they never
receive IPI from the coldboot HART.
To address this, use a simple busy-loop in wait_for_coldboot() for
polling on coldboot_done flag.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The address of the local scratch area is stored in each hart's mscratch
CSR. It is more efficient to read the CSR than to compute the address
from the hart ID.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The address of the local scratch area is stored in each hart's mscratch
CSR. It is more efficient to read the CSR than to compute the address
from the hart ID.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Avoid using C types and casts if sbi/sbi_byteorder.h is included in
assembly code
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add SSE callbacks registration to PMU driver in order to disable
interrupt delegation for PMU interrupts. When interrupts are
undelegated send the PMU SSE event upon LCOFIP IRQ.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The SBI SSE extension defines a set of function that can be called to
register and handle supervisor sofwtare events. This patch implements
all of the functionality defined in the specification.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This extension [1] allows to deliver events from SBI to supervisor via
a software mechanism. This extension defines events (either local or
global) which are signaled by the SBI on specific signal sources (IRQ,
exceptions, etc) and are injected to be executed in supervisor mode.
[1] https://lists.riscv.org/g/tech-prs/message/798
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
All T-Head CSRs are already defined in thead/c9xx_encoding.h.
Let's reuse the values from there instead of redefining them with
a slightly different name.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Anup Patel <anup@brainfault.org>
We should store test object files list in the `libsbi-objs-y` Makefile
variable, not in `libsbitests-objs-y`. Update the documentation
correspondingly.
Since we don't use the `console_dev` static variable directly in the
`sbi_console_test` unit test anymore, remove the paragraph which says
that we do.
Fixes: 86224ec36a ("docs/writing_tests: Update tests paths")
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_trap_error() should dump state of all in-flight traps upon
failure in a nested trap so extend it accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
The struct sbi_trap_context already has the information needed by
sbi_illegal_insn_handler() so directly pass struct sbi_trap_context
pointer to this function.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
The struct sbi_trap_context already has the information needed by
misaligned load/store and access fault load/store handlers so directly
pass struct sbi_trap_context pointer to these functions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Club the struct sbi_trap_regs and struct sbi_trap_info a new
struct sbi_trap_context (aka trap context) which must be saved
by low-level trap handler before calling sbi_trap_handler().
To track nested traps, the struct sbi_scratch points to the current
trap context and the trap context has pointer to pervious context
of previous trap.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
To track nested traps, the struct sbi_scratch needs a pointer the
current trap context so add trap_context pointer in struct sbi_context.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Over the years, no uses of sbi_trap_exit() have been found so remove
it and also remove related code from fw_base.S and sbi_scratch.h.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
In the only places this value is used, it duplicates mepc from
struct sbi_trap_regs.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since the tests should be moved to the lib/sbi/tests directory, the
documentation should be updated correspondingly. So, update the paths
where they have to be changed.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Move all of the SBIUnit-related code into the lib/sbi/tests directory.
Update 'Makefile' to index objects from the tests subdirectory.
I don't think creating the full separate list of Makefile variables
(libsbitests-objs-path-y, libsbitests-object-mks, etc. as it is done for
libsbiutils) is necessary for the tests because:
1) `lib/sbi/tests/objects.mk` is already indexed into
'libsbi-objects-mks' since the find expression for the libsbi-object-mks
variable looks for objects.mk files in the nested directories as well).
2) Tests are tightly coupled with the `lib/sbi/` sources, therefore it
may be reasonable to store the list of lib/sbi and lib/sbi/tests object
files together in the libsbi-objs-path-y variable.
Additionally, update relative paths in the tests where necessary.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sbi_load/store_access_handler now tries to call platform emulators
if defined. Otherwise, redirects the fault. If the platform code
returns failure, this means the H/S/U has accessed the emulated
devices in an unexpected manner, which is very likely caused by
buggy code in H/S/U. We redirect the fault, so lower privileged
level can get notified, and act accordingly. (E.g., oops in Linux)
We let the handler truly fail if the trap was originated from M mode.
In this case, something must be very wrong and we should just fail.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch allows the platform to define load/store emulators. This
enables a platform to trap-and-emulate special devices or filter
access to existing physical devices.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch abstracts out the instruction decoding part of misaligned ld/st
fault handlers, so it can be reused by ld/st access fault handlers.
Also Added lb/lbu/sb decoding. (previously unreachable by misaligned fault)
sbi_trap_emulate_load/store is now the common handler which takes a `emu`
parameter that is responsible for emulating the misaligned or access fault.
The `emu` callback is expected to fixup the fault, and based on the return
code of `emu`, sbi_trap_emulate_load/store will:
r/wlen => the fixup is successful and regs/mepc needs to be updated.
0 => the fixup is successful, but regs/mepc should be left untouched
(this is usually used if `emu` does `sbi_trap_redirect`)
-err => failed, sbi_trap_error will be called
For now, load/store access faults are blindly redirected. It will be
enhanced in the following patches.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This simplifies both handlers such that when the handler needs to
redirect the original trap, it's readily available.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sbi_trap_redirect now uses const pointer to `trap`.
This ensures the caller that we never change `trap` in sbi_trap_redirect.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The domain context management component in OpenSBI provides basic CPU
context management routines for existing OpenSBI domain. As domain
extension, it was initially designed to facilitate the suspension
and resumption of domains, enabling secure domains to efficiently
share CPU resources.
The patch also provides an addition to the OpenSBI domain to provide
updates on hart-domain assignment and declarations of contexts within
the domain.
Signed-off-by: Qingyu Shang <2931013282@sjtu.edu.cn>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Tested-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add the test suite covering some of the functions from
lib/sbi/sbi_console.c: putc, puts and printf. The test covers a variety
of format specifiers for printf and different strings and characters for
putc and puts.
In order to do that, the test "mocks" the sbi_console_device structure
by setting the 'console_dev' variable to the virtual console.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Add test suite covering all of the functions from lib/sbi/sbi_bitmap.c:
__bitmap_and, __bitmap_or and __bitmap_xor.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
This patch introduces all of the SBIUnit macros and functions which
can be used during the test development process. Also, it defines
the 'run_all_tests' function, which is being called during the
'init_coldboot' right after printing the boot hart information.
Also, add the CONFIG_SBIUNIT Kconfig entry in order to be able to
turn the tests on and off. When the CONFIG_SBIUNIT is disabled,
the tests and all related code is excluded completely on the
compilation stage.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
This patch contains the documentation for SBIUnit. It describes:
- What is SBIUnit
- Simple test writing scenario
- How we can cover static functions
- How we can "mock" structures in order to test the functions which
operate on them
- SBIUnit API Reference
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
The same detection was done twice when setting mtvec and trap_exit.
Merging can reduce code size.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Added exception handling for compressed instructions C.LHU, C.LH, and
C.SH from the zcb extension to the sbi_misaligned_ldst library.
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Smcsrind allows generic indirect CSR access mechanism while
Smcdeleg allows delegating hpmcounters in Supervisor mode.
Enable both extensions and set the appropriate bits in mstateen
and menvcfg.
Co-developed-by: Kaiwen Xue <kaiwenxue1@gmail.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Hart state should change back to hart stop when hsm_device_hart_start()
or sbi_ipi_raw_send() fails to perform hart start.
Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Adding relocatable address brings new configuration options for jump
and payload firmwares. Describe these new options in documentation.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since jump and payload firmware support relocatable address, make
general platform use runtime relocatable address.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The fw_payload.bin has the same issue as described in previous patch.
But only FW_PAYLOAD_FDT_ADDR is affected.
Add FW_PAYLOAD_FDT_OFFSET to identify relocatable payload fdt address.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If FW_PIC=y is defined, the fw_jump.bin will be broken if
FW_TEXT_START is wrong. This is not the desired behavior.
Add two new variables to identify relocatable jump address:
FW_JUMP_OFFSET and FW_JUMP_FDT_ADDR. To keep the existing
ABI, FW_JUMP_ADDR and FW_JUMP_FDT_ADDR is prefered if they
are defined.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The function starfive_jh7110_inst_init() initialize some power
management unit address and clock addresses, needed for the reset
driver. It doesn't do anything else, and also the reset driver doesn't
work without calling this function. Thus, it does not make much sense
that this function is independent from pm_reset_init().
Delete the separate call to starfive_jh7110_inst_init(), and instead
just call this function inside pm_reset_init().
Doing this also fixes another problem: if starfive_jh7110_inst_init()
returns an error code, it gets propagated to final_init() and OpenSBI
hangs. This hang is not necessary, because failures within
starfive_jh7110_inst_init() only mean OpenSBI cannot perform reboot or
shutdown, but the system can still function normally.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Jh7110's reset driver needs power management device and clock controller
device to work. Currently, the driver proceed anyway without these
devices, and invalid addresses (jh7110_inst.pmu_reg_base and
jh7110_inst.clk_reg_base) are used during reboot, which causes
unpredictable broken behaviors.
If these devices are not present, return -SBI_ENODEV.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
OpenSBI uses the device tree compatible string "stf,axp15060-regulator"
for the regulator node. However, the string used by U-Boot (and Linux)
is actually "x-powers,axp15060". As OpenSBI gets the device tree from
U-Boot, this causes the regulator device to be undetected, and OpenSBI
does not use this device to perform board reset/shutdown.
Rename this device tree compatible string to match U-Boot (and Linux).
Signed-off-by: Nam Cao <namcao@linutronix.de>
Acked-by: Minda Chen <minda.chen@starfivetech.com>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
pmic_ops() is only called if a compatible device is found in device
tree. It is redundant for this function to check the compability again.
Remove this check.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The current code gets the I2C offset address using the device tree node
name: it get the I2C device index from the 4th character in the node
name (for example, "i2c5" -> i2c device 5). However, the device tree
node's name in U-Boot is actually just "i2c" without the number, so the
current code cannot be used with the device tree from U-Boot.
Get the I2C offset address from the "clocks" property instead.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Minda Chen <minda.chen@starfivetech.com>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Starfive names the system clock device tree node "starfive,jh7110-clkgen"
in all their git repositories. However, a different name is used in
upstream U-Boot (and also Linux): "starfive,jh7110-syscrg". Since
OpenSBI gets the device tree from U-Boot, this inconsistency leads the
problem that OpenSBI doesn't know the system clock device exists.
Correct this name to keep the consistency.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Acked-by: Minda Chen <minda.chen@starfivetech.com>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If trap earlier before sbi_pmu_init done, some path would call
sbi_pmu_ctr_incr_fw, then it would go wrong:
1. if phs_ptr_offset is zero, then it get a wrong pmu state ptr
2. if phs_ptr_offset is ok, but we didn't call pmu_set_hart_state_ptr
it would be NULL POINT
Of course, the above situation will not occur at present, but it is
reasonable to check before using.
Signed-off-by: yang.zhang <yang.zhang@hexintek.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch move documentation of "system-suspend-test" from
docs/domain_support.md to docs/opensbi_config.md
Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch update generic_domains_init() so that "system-suspend-test"
is parsed from "/chosen/opensbi-config" DT node.
Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch add docs/opensbi_config.md which describes the
"/chosen/opensbi-config" DT node and properties
Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Added support for the generic platform to specify the set of coldboot
hart in DT. If not specified in DT, all harts are allowed to coldboot
as before.
The functions related to sbi_hartmask are not available before coldboot,
so I used bitmap, and added a new bitmap_test() function to test whether
a certain bit of the bitmap is set.
Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
lwu exists under the current rv64 and should also exist under the rv128
in the future, so I modified the conditions of conditional compilation
so that it can adapt to the future situation
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
With a bare-metal linkers (e.g. riscv64-elf-ld), there exists no
dynsym section. The dynsym section is not used by OpenSBI but
discarding it makes linkers with dynamic library support unhappy.
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Reviewed-by: Anup Patel <anup@brainfault.org>
While writing to the dynsym is futile, the --exclude-libs options is not
recognized by all linkers (e.g. riscv64-elf-ld.bfd).
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Reviewed-by: Anup Patel <anup@brainfault.org>
Support for that option will be added in LLVM 18:
23ce536840
Clang 17.0.6, however, will error when passed the
`-mstrict-align` flag.
We should only use the flag if it is supported.
Signed-off-by: Kalle Wachsmuth <kalle.wachsmuth@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>
When calling '_reset_regs', it'll reset all registers except some
specific registers (ra, a0, a1, and a2).
Both boot HART and non-boot HARTs will execute the '_start_warm'
function. Therefore, when '_reset_regs' is called in '_start_warm', it
will reset all registers except some specific registers (ra, a0, a1 and
a2) for both boot HART and non-boot HARTs.
Signed-off-by: Zhang Runmin <fmrt19zrmin@163.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The trigger allocation function uses bit shift instead of mask to check the
mapped status of the triggers. This causes index 0 to be return always. As a
result, the older triggers are overwritten.
Use the mask for MAPPED field in state word to check if the trigger is mapped.
Fixes: 97f234f15 ("lib: sbi: Introduce the SBI debug triggers extension support")
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch adds functions to register ecalls for debug triggers
and handler to handle the debug trigger function IDs.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch adds defines for SBI debug trigger extension and
function IDs to access the extension.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
RISC-V Debug specification includes Sdtrig ISA extension
which describes Trigger Module. Triggers can cause
a breakpoint exception or trace action without execution
of a special instruction. They can be used to implement
hardware breakpoints and watchpoints for native debugging.
The SBI Debut Trigger extension (Draft v6) can be found at:
https://lists.riscv.org/g/tech-debug/topic/99825362#1302
This patch is an initial implementation of SBI Debug
Trigger Extension (Draft v6) in OpenSBI.
The following features are supported:
* mcontrol, mcontrol6 triggers
* Breakpoint and trace actions
NOTE: Chained triggers are not supported
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Detect if debug triggers, sdtrig extension, is supported
by the CPU. The support is detected by access traps and
ISA string parsing.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch introduces Mcontrol and M6 control register
encodings along with macros to manipulate them.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Introduce cpu_to_lle and lle_to_cpu macros which invoke
correct word length cpu_to_le<64/32> conversion based on
__riscv_xlen.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch updates OpenSBI version to 1.4 as part of
release preparation.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
OpenSBI uses time CSR if Zicntr extension present which causes
it to crash on an older QEMU because QEMU generates Zicntr in
the ISA string for unleashed machine which only has CYCLE and
INSTRET counters.
Fixes: 776770d2ad ("lib: sbi: Using one array to define the
name of extensions")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The parser will fail if the timer is clint timer and has regname
property. As the regname is only meaningful for aclint, it is more
robust to only check regname for aclint timer.
Fixes: 6112d58 ("lib: utils/fdt: Allow to use reg-names when parsing ACLINT")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
There is a problem with judging whether the current hart belongs to
hmask. If cur_hartid minus hbase is greater than BITS_PER_LONG, the
previous hmask will also have a bit cleared incorrectly, which will
cause some harts to lose ipi.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
On platforms with Smepmp, the previous booting stage must enter
OpenSBI with mseccfg.MML == 0. This allows OpenSBI to configure
it's own M-mode only regions without depending on the previous
booting stage.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The SBI_ETRAP error code was introduced only for doing trap
redirection in generic sbi_ecall_handler(). Now the trap
redirection is moved into sbi_ecall_legacy.c and SBI_ETRAP
error code is only used in this source file so let us remove
it.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Some of the upcoming SBI extensions (such as SSE) will directly
update register state so improve the prototype of ecall handler
to accommodate this. Further, this flexibility allows us to
push the trap redirection from sbi_ecall_handler() to the
sbi_ecall_legacy_handler().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
On platforms with Smepmp, the MMIO regions accessed by M-mode need
to be explicitly marked with M-mode only read/write or shared (both
(M-mode and S-mode) read/write permission.
If the above is not done then runtime PLIC access from M-mode on
platforms with Smepmp will result in access fault when further
results in CPU hotplug not working.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let's use SBI_TLB_INFO_SIZE instead of hard-coded 0x40 in
fw_platform_calculate_heap_size() to fine tune the heap size
required for per-hart TLB fifos.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us reduce the size of struct sbi_tlb_info by doing the
following:
1) Change the data type of asid and vmid fields to uint16_t
2) Replace local_fn() function pointer with an enum
Based on the above, the size of struct sbi_tlb_info is reduced
by 16 bytes on RV64 and 4 bytes on RV32.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Enable access to some extensions through menvcfg and show them in "Boot
HART ISA Extensions" if they are present in the device tree.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Define an array sbi_hart_ext to map extension ID and name , and use it
for ISA parsing and printing out the supported extensions.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We can enhance the code by creating 2 unified interface with macro for
privilege mode and extensions detection, which relies on supported
privilege modes and CSRs.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The original code has multiple conversions between hartid and
hartindex. Can call sbi_hartmask_set_hartindex directly to
avoid conversion.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sbi_ipi_event_create() disallows registering an IPI event with a NULL
.process callback, so the function pointer will never be NULL here.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>
An IPI sent to the local hart can be processed directly instead of
triggering the IPI device. This is more efficient, and it avoids a
deadlock when the .sync callback is defined. Since interrupts are
disabled while handling an ecall, the IPI would not get delivered
until the next mret, but sbi_ipi_sync() is called before then.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Currently, failures in sbi_ipi_send() are silently ignored, which makes
them difficult to debug. Instead, abort sending the IPI and pass back
the error, but still synchronize any IPIs already sent.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The tlb_update() callback is called for each destination hart.
Move the size check earlier, so it is executed only once.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the fdt_parse_aclint_node() follows a fixed order to parse
ACLINT timer. This may cause the undesirable result when the ACLINT
device does not support mtime without adding an empty entry for it in
the DT.
To be robust, make fdt_parse_aclint_node() support "reg-names" property,
so it can parse the DT in an order independent way. For compatibility,
fdt_parse_aclint_node() only use "reg-names" when parsing ACLINT timer,
and will fallback to the old way if "reg-names" property is not found.
Link: https://lore.kernel.org/all/20231114-skedaddle-precinct-66c8897227bb@squawk/
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup patel <anup@brainfault.org>
When warmboot via HSM, coolboot has been completed and
wait_for_coldboot can be skipped to speed up.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Previous patch introduced a change that using hart count as the default
number of tlb entries in the fifo. This makes the default tlb fifo size
grow in square with the number of harts. So the default heap size is
not enough to allocate tlb fifo when the hart count is big.
Fixes: 52fd64b ("platform: Uses hart count as the default size of tlb info")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Current interruptible hart mask doesn't include the hart which HSM state
is SBI_HSM_STATE_RESUME_PENDING. So when there is a request to send an
IPI to the hart which is in the resume process, this hart would miss the
IPI forever. Put the SBI_HSM_STATE_RESUME_PENDING hart in the
interruptible hart mask to fix the issue.
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The counter info should only return valid hardware counters for the ones
set in the counter mask. Otherwise, it will report incorrect number of
hardware counters to the supervisor if the platform has discontiguous
counters.
Fixes: c744ed77b1 ("lib: sbi_pmu: Enable noncontigous hpm event and counters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
OpenSBI doesn't support SBI PMU snapshot yet as there is not much benefit
unless the multiple counters overflow at the same time.
Just add the definition and return not supported error at this moment. The
default returned error is also not supported. Thus, no functional change
intended.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Multiple harts may try to send IPI to a particular target hart A
in which case the send_ipi() should be called only when the old
value of the hart A ipi_type is zero.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Simplify atomic-related bit operations through __atomic intrinsics.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The original code returns the value of the word before modification.
When modifying the upper 32 bits under RV64, the value returned via
int return will have no meaning. Corrected to return the value of the
bit. And modify the function description.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
lr/sc is part of the A extension. If the A extension is not supported,
lr/sc cannot be used. So remove xchg/cmpxchg.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add PMU node example for event index to counter index mapping
and selector value translation of Andes' CPUs.
Currently, there are 4 HPM counters that can be used to monitor
all of the events for each hart.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
The valid entry count is tracking by hw_event_count so there
is no need to check the whole table.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
To allow platform override pmu_init() filling the translation table
fdt_pmu_evt_select[] when PMU node doesn't provide such information,
we need to share the table and its entry counter with other .c file.
We also define the structures of PMU property in fdt_helper.h, so we
can initialize the mappings in arrays.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We will need is_andes(45) in the following patch,
so factor out the code that parses marchid to make
it reusable for checking any Andes CPU variants.
Also improves the comment in ae350_hart_start().
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add a Kconfig option to control PMU fixup, so the next
stage software can dump the PMU node including event
mapping information for debugging purposes.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Before the ratification of Sscofpmf, the Andes PMU extension
was designed to support the sampling and filtering with hardware
performance counters (zihpm), it works with the current SBI PMU
extension and Linux SBI PMU driver.
We implement 1) the PMU device callbacks that update the
corresponding bits on custom CSRs, 2) extentions_init() to detect
the hardware support of Andes PMU and initialize the per-hart
PMU related CSR, and 3) pmu_init() to register PMU device and
populate event mappings.
Also define a andes_pmu_setup() function which is in preparation
for adding default PMU mappings in andes_hpm.h
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add support for custom PMU extensions to set inhibit bits
on custom CSRs by introducing the PMU device callback
hw_counter_filter_mode(). This allows the perf tool to
restrict event counting under a specified privileged
mode by appending a modifier, e.g. perf record -e event:k
to count events only happening in kernel mode.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch makes the following changes:
- As sbi_platform_pmu_init() returns a negative error code on
failure, let sbi_pmu_init() print out the error code with
sbi_dprintf().
- In order to distinguish the SBI_EFAIL error returned by
sbi_pmu_add_*_counter_map(), return SBI_ENOENT to indicate
that fdt_pmu_setup() failed to locate "riscv,pmu" node, and
generic_pmu_init() ignores such case.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The old scheme doesn't allow sending hart0 self-IPI as the
corresponding bit on pending register is hardwired to 0, this
could lead to unhandle IPIs on SMP systems, esp. on single-core.
Furthermore, the limitation of old scheme is 8-core, instead of
reserving source hart information, we assign bit (x + 1) as the
enable and pending bit of hartx, this also expands the bootable
hart number.
The following diagram shows the enable bits of the new scheme
on 32-core Andes platform.
Pending regs: 0x1000 x---0---0---0---0------0---0
Pending hart ID: 0 1 2 3 ... 30 31
Interrupt ID: 0 1 2 3 4 ... 31 32
| | | | | | |
Enable regs: 0x2000 x---1---0---0---0-...--0---0---> hart0
| | | | | | |
0x2080 x---0---1---0---0-...--0---0---> hart1
| | | | | | |
0x2100 x---0---0---1---0-...--0---0---> hart2
| | | | | | |
0x2180 x---0---0---0---1-...--0---0---> hart3
. . . . . . .
. . . . . . .
. . . . . . .
0x2f00 x---0---0---0---0-...--1---0---> hart30
| | | | | | |
0x2f80 x---0---0---0---0-...--0---1---> hart31
<-------- word 0 -------><--- word 1 --->
To send IPI to hart0, for example, another hart (including hart0
itself) will set bit 1 of first word on the pending register.
We also fix indentation in andes_plicsw.h along with this patch.
Fixes: ce7c490719 ("lib: utils/ipi: Add Andes fdt ipi driver support")
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Randolph <randolph@andestech.com>
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005665.html
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, there are no barriers before or after the ipi_clear()
device callback which forces ipi_clear() device callback to always
use non-relaxed MMIO writes.
Instead of above, we use wmb() in after the ipi_clear() device
callback which pairs with the wmb() done before the ipi_send()
device callback. This also allows device ipi_clear() callback
to use relaxed MMIO writes.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reported-by: Bo Gan <ganboing@gmail.com>
Currently, we have a smp_wmb() between atomic_raw_set_bit() and
ipi_send() device callback whereas the MMIO writes done by the
device ipi_send() callback will also include a barrier.
We can avoid unnecessary/redundant barriers described above by
allowing relaxed MMIO writes in device ipi_send() callback. To
achieve this, we simply use wmb() instead of smp_wmb() before
calling device ipi_send().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reported-by: Bo Gan <ganboing@gmail.com>
Each APLIC CLRIE register allows disabling 32 interrupt sources at
a time by writing -1 so no need to write CLRIE register separately
for each interrupt source.
Fixes: 99792653de ("lib: utils/irqchip: Add APLIC initialization library")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
total_ctrs is bounded by
SBI_PMU_FW_CTR_MAX + SBI_PMU_HW_CTR_MAX) == 48
which exceeds BITS_PER_LONG on 32 bit systems.
Iterating over the bits of &cmask results in a buffer overflow when looking
for a bit >= BITS_PER_LONG.
Adjust the iterators in sbi_pmu_ctr_start() and sbi_pmu_ctr_stop()
accordingly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_hart_map_saddr() must create PMP mapping of size greater
than or equal to PMP granularity otherwise PMP mapping does not
work when size parameter less than sbi_hart_pmp_granularity(scratch).
Fixes: 6e44ef686a ("lib: sbi: Add functions to map/unmap shared memory")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
For some debuggers that do not implement SYSWRITEC and SYSREADC
operations, we have to use SYSWRITE and SYSREAD.
Instead of implementing semihosting_putc() using SYSWRITE, let us
simply remove semihosting_putc() because console_putc/console_puts
are now interchangeable.
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
console_puts/console_putc should replace each other, but the previous
sbi_putc can only use console_putc. This patch addresses this problem.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
In the future there may be a lot of ISA extensions, a 'long' may not
be able to accommodate, changed to an array for the future.
Addresses-Coverity-ID: 1568357 Out-of-bounds access
Fixes: 6259b2ec2d ("lib: utils/fdt: Fix fdt_parse_isa_extensions()
implementation")
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If ISA extension Zkr is available, set
mseccfg.sseed=1
mseccfg.useed=0
This enables access to the seed CSR in S-mode but not in U-mode.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
- Add Zkr as extension in sbi_hart_extensions enum
- Return "zkr" string for Zkr extension from sbi_hart_extension_id2string
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Define macros to access the sseed and the useed bit in the machine
security configuration register (mseccfg).
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As the domain will reject a new memory region which has a sub-regions
already in the domain, even the new region is bigger and has the same
flags. This problem can be solved by relaxing region restriction and
rechecking when adding and sanitizing domains.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Swapping domain region is a common operation when sorting domain region,
so separate it as a function to make code clean.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The quirks checking will cause ACLINT step into a CLINT code path, this
is not expected when ACLINT needs custom quirks.
Add a new quirk to identify custom ACLINT, and apply the general quirks
after applying CLINT specific quirks.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In the past, we used fdt_reset_thead to help customers with prototype
verification. However, with the emergence of the Big-little SoC system,
it can no longer meet the demand. Therefore, we use zero_stage_boot
instead of fdt_reset_thead. It cleans up the opensbi code and ends the
disputation of reset_sample's dts.
This patch removes the fdt_reset_thead component and updates the related
doc.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
It's wrong to put the fence after setting the boot status flag because
all relocation operations must be finished before setting the status
flag. So, this fence must be put before the setting status flag, and
there is no use in putting a fence between _start_warm and setting
status flag.
Also, nop can't delay other harts too much, so use div instead, just
like Linux cpu_relax. Current opensbi force enables “M” Standard
Extension, and mul instructions have been used in the fw_base.S.
After the above two fixes, the boot hart index param of the
fw_dynamic_info could be guaranteed properly for all platforms.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
For some debuggers that do not implement SYSWRITEC and SYSREADC
operations, we can use SYSWRITE and SYSREAD instead like the
implementation of semihosting_getc().
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For platform with high number of harts, it is better to auto detect a
suitable number of entries in tlb fifo. Since allocating tlb entry for
all online harts can reduce the wait time significantly, using the
number of the online harts can make most platforms happy. This auto
detection can avoid most duplicate code for setting tlb fifo size.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Flushing the tlb entries can solve the thead tlb problem, but flushing
it by address will miss something and lead to a exception in some rare
cases, and this is more common for sg2042.
To solve this problem, flush the tlb entries by asid in the custom trap
handler to ensure it is refreshed.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Per the SBI specification, the effects of these functions are limited to
a specific ASID and/or VMID. This applies even when flushing the entire
address space.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since all the SoC with thead c9xx cores need this initialization at now,
initialize the c9xx pmu in the thead generic platform by default.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Separate the implement of T-HEAD c9xx errata to allow any platform
with bug related to c9xx cores can use it.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Separate the implement of T-HEAD c9xx pmu to allow any platform with
c9xx cores can use it.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The CSR encoding for t-head c9xx cores is shared across all the
platforms with these cores. So move header thead_c9xx.h to the
thead subdir.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since commit 112daa2e64 ("lib: sbi: Maximize the use of HART index in
sbi_domain") the platform parameter is unused.
Fixes: 112daa2e64 ("lib: sbi: Maximize the use of HART index in sbi_domain")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that SBI v2.0 specification is frozen, we change spec version
implemented by OpenSBI to v2.0.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Unlike C.LWSP/C.LDSP, these encodings can be used with the zero
register, so checking that the rs2 field is non-zero is unnecessary.
Additionally, the previous check was incorrect since it was checking
the immediate field of the instruction instead of the rs2 field.
Signed-off-by: Amanieu d'Antras <amanieu@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
RISC-V privileged specification v1.12 introduced the mconfigptr CSR
which will hold the physical address of a configuration data
structure.
Signed-off-by: Yangjie Zhang <jay1273062855@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
"Zicsr" isa extension has been separated from "I" extension.
This patch add the isa requirement of "Zicsr" extension in
platform requirements documentation.
Signed-off-by: Yangjie Zhang <jay1273062855@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In starfive_gpio_direction_output() readl() is called twice to read the
gpio direction register. The result of the first read is discarded.
Remove the redundant read.
Fixes: 908be1b85c ("gpio/starfive: add gpio driver and support gpio reset")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sbi_pmu_ctr_cfg_match() receives data from a lower privilege level mode.
We must catch maliciously wrong values.
We already check against total_ctrs. But we do not check that total_ctrs is
less than SBI_PMU_HW_CTR_MAX + SBI_PMU_FW_CTR_MAX.
Check that the number of hardware counters is in the valid range.
Addresses-Coverity-ID: 1566114 Out-of-bounds write
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The define is hard to read. The continue statement does not do what was
intended.
* Remove do {} while (false);
* Change the name to set_multi_letter_ext
- Other local macros are lower case too.
- Refer to the fact that this is only used for multi-letter extensions.
Addresses-Coverity-ID: 1568359 Unexpected control flow
Fixes: d72f5f1747 ("lib: utils: Add detection of Smepmp from ISA string in FDT")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
hart_exts == NULL can only occur if offset and node address lead to an
overflow resulting in exactly NULL. As we don't catch other values of
overflow it does not make sense to treat this one as special.
Addresses-Coverity-ID: 1568355 Logically dead code
Addresses-Coverity-ID: 1568358 Logically dead code
Fixes: 6259b2ec2d ("lib: utils/fdt: Fix fdt_parse_isa_extensions() implementation")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
'1' is a 32 bit integer. When shifting it by more than 31 bits it becomes
zero and we get an incorrect return value.
Addresses-Coverity-ID: 1568356 Bad bit shift operation
Fixes: 296e70d69d ("lib: sbi: Extend sbi_hartmask to support both hartid and hartindex")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The added memory region should start from the base address.
Otherwise, the range will be shifted by reg_offset and not
able to merge consecutive NAPOT regions in the root domain,
resulting in wasted PMP entries.
Fixes: e8bc1621 ("lib: utils/serial: Add shared regions for
serial drivers")
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The base of .text is defined by `FW_TEXT_START`, not `FW_TEXT_BASE`.
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since everything is statically linked, we don't need to expose symbols
for dynamic linking.
For a default build this saves about 2 KiB of useless read only data in
.dynsym, .dynstr, .hash, .gnu.hash sections.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since everything is statically linked, we won't actually have
R_RISCV_{32,64} relocations. No need to handle these.
Fixes: 0f20e8adcf ("firmware: Support position independent execution")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The .rela.dyn section should be exactly the size of the relocations,
without padding. On RV64, .rela* sections are already aligned and
there's no need for padding. On RV32, this adds padding up to 4 bytes,
which, if present, confuses the relocation loop into processing an extra
entry past the end of .rela*, and it crashes with an invalid memory
access.
Fixes: 0f20e8adcf ("firmware: Support position independent execution")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The TLB entries remain functional all the time once added in T-HEAD th1520
and Sophgo sg2042 (even if the MMU is then disabled afterwards). If there
are some stale TLB entries that contains the address of SBI, it will cause
unexpected memory access and issue a illegal instruction error. To avoid
this, a TLB flush is needed to drop these TLB entries before any memory
access in the trap handler.
To handle this workaroud, add a custom trap handler with executing TLB flush
first in the T-HEAD platform to fix affected socs.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The syscon region used by OpenSBI should be marked as a shared
read-write region between M-mode and SU-mode.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
The serial driver regions used by OpenSBI should be marked as a shared
read-write regions between M-mode and SU-mode as those are accessed
by earlycon and the corresponding tty serial drivers running in 'S' mode.
When the smepmp extension is enabled, PMP entries for these shared regions
will get programmed.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Based on sections 4.c and 4.d in Ch.2 of the Smepmp spec the PMP entries
must be programmed as below:
1. Program M-only entries
2. Enable mseccfg.MML
3. Program shared-region entries
4. Program SU-only entries
Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The Smepmp read-only shared region must have pmpcfg.L, pmpcfg.R,
pmpcfg.W, and pmpcfg.X bits set so sbi_hart_get_smepmp_flags()
must return pmp_flags accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
The mseccfg.MML bit is a sticky bit which remains unchanged once set
so no need to clear it in sbi_hart_smepmp_configure().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Let us factor-out Smepmp configuaration as separate function so
that code is more readable.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
The macros to test permissions must perform an exact match of all the
bits in the input with the desired permission bits. Otherwise, the check
returns false positives in those cases where only some of the desired
permissions are set in the input.
Fixes: 6c202c5 ("include: sbi: Add Smepmp specific access flags for PMP
entries")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_hartmask_for_each_hart() macro is slow and has only one user
so let us completely remove the sbi_hartmask_for_each_hart() macro.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us maximize the use of HART index in sbi_domain because hartindex
based hartmask access and sbi_scratch lookup is faster.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The sbi_scratch_last_hartid() macro is not of much use on platforms
with really sparse hartids so let us replace use of this macro with
other approaches.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us prefer hartindex over hartid in IPI framework which in-turn
forces IPI users to also prefer hartindex.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The sbi_hartid_to_scratch() involves translating hartid to hartindex
which is expensive so let's use sbi_hartindex_to_scratch() instead.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Currently, the sbi_hartmask is indexed by hartid which puts a
limit on hartid to be less than SBI_HARTMASK_MAX_BITS.
We extend the sbi_hartmask implementation to use hartindex and
support updating sbi_hartmask using hartid. This removes the
limit on hartid and existing code works largely unmodified.
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The hartid to hartindex mapping is now tracked in sbi_scratch so we
don't need sbi_platform_hart_index() and sbi_platform_hart_invalid()
functions hence let us remove them.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We introduce HART index and related helper functions in sbi_scratch
where HART index is contiguous and each HART index maps to a physical
HART id such that 0 <= HART index and HART index < SBI_HARTMASK_MAX_BITS.
The HART index to HART id mapping follows the index2id mapping provided
by the platform. If the platform does not provide index2id mapping then
identity mapping is assumed.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We found the mstatus.FS status is not set correctly after the SET_F64_REG()
and SET_F32_REG(). We should set mstatus.FS dirty after we emulate the FPU
instructions.
Co-developed-by: Roy Lin <roy.lin@sifive.com>
Signed-off-by: Roy Lin <roy.lin@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If the system is defined from tlb_fifo_num_entries, the scratch may be
too small to hold the fifo, so it is alloc through the heap.
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Xing Xiaoguang <xiaoguang.xing@sophgo.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For some platforms with a particularly high number of harts, if the
tlb fifo is too small, it case harts to wait. Platforms should be
allowed to specify the size of the tlb fifo.
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Xing Xiaoguang <xiaoguang.xing@sophgo.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
After the hardware hpm counter is stopped, it should not raise any new
interrupt as it is already stopped. So add the hw_counter_disable_irq
callback to allow the custom pmu device to control this behavior.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Samuel Holland <samuel@sholland.org>
T-HEAD c9xx pmu needs to clear OV bits of MCOUNTEROF in any condition
to avoid unnecessary OF interrupts.
In addition, the S-mode SCOUNTEROF only have OF bit set when the related
bits of MCOUNTERWEN is set, so also configure MCOUNTERWEN to allow kernel
to access valid SCOUNTEROF.
Signed-off-by: Haijiao Liu <haijiao.liu@sophgo.com>
Co-authored-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Samuel Holland <samuel@sholland.org>
When detecting features of PMU, the hpm counter may be written to some
value, this will cause some unexpected behavior in some cases. So ensure
the hpm counter is updated before starting the counter and the related
interrupt.
Signed-off-by: Haijiao Liu <haijiao.liu@sophgo.com>
Co-authored-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Samuel Holland <samuel@sholland.org>
The previous definition had the assumption that the machine word length
is equal to the word length of LONG. Remove this assumption and add a
static check to prevent errors in subsequent modifications.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As the the "Console Putchar" extension is already legacy and may
be removed in the furture. So replace it with the SBI v2.0 "DBCN"
extension.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
After supporting noncontigous hpm event and counters in opensbi, the
number of hpm counters can be calculated by the mhpm_mask. So this field
is unnecessary and can be removed to save some space.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
grep (at least my version, grep-3.8-3.fc38.x86_64) warns with
"grep: warning: stray \ before -". Fix the warning by making
the command line input to grep less ambiguous.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This adds the support for ISA extension smcntrpmf. When some inhibit flags
are set by a lower privilege mode for new CSRs added by smcntrpmf, OpenSBI
sets the appropriate values correspondingly.
Signed-off-by: Kaiwen Xue <kaiwenx@andrew.cmu.edu>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Attempting to build OpenSBI with clang 16 and the following command:
$ make LLVM=1 PLATFORM=generic
Results in the following error:
AS platform/generic/firmware/fw_dynamic.o
/tmp/fw_dynamic-d000a6.s:429:9: error: symbol '_fw_start' can not be undefined in a subtraction expression
.dword _fw_rw_start - _fw_start
Work around this issue by eliminating the __fw_rw_offset variable and
performing the offset calculation at run-time instead. This takes
advantage of the fact that the a4 register contains the value of
_fw_start.
Signed-off-by: Mitchell Horne <mhorne@FreeBSD.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cycle and instructions are hardware events instead of firmware ones. Fix
the typo in the name of this function.
Signed-off-by: Kaiwen Xue <kaiwenx@andrew.cmu.edu>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Anup patel <anup@brainfault.org>
Currently, the fdt_parse_isa_extensions() tries to parse the ISA
string once for each HART. This ISA string parsing can fail for
secondary HARTs if the FDT memory is already overwritten by the
supervisor OS.
To tackle this issue, we improve the fdt_parse_isa_extensions()
implementation to pre-parse ISA string for all HARTs during
cold boot.
Fixes: d72f5f1747 ("lib: utils: Add detection of Smepmp from ISA
string in FDT")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-By: Mayuresh Chitale<mchitale@ventanamicro.com>
Platforms may implement hpm events/counters non contiguously but the current
implementation assumes them to be always contigous. Add a bitmap that
captures the hpm events/counters as implemented in the hardware and use
it to set the max limit of hardware counters visible to the OS. Counters
not implemented in the hardware can't be used by the OS because those
wont be described in the DT.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Nowadays, most of the editor use files or directories begin with dot to
store some settings. So let git ignore these files and directories to
reduce potential mistakes.
Add dot match to ignore any editor file and there are two exceptions:
- .gitignore
- .clang-format
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The functionality of SiFive Test reset driver is easily available
through Syscon reset driver so let us remove the SiFive Test driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us have common FDT based reset driver for syscon reboot and
poweroff. The device tree bindings for syscon reboot and poweroff
are already available in the Linux kernel sources.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Let us add a simple FDT based system regmap driver which follows the
device tree bindings already defined in the Linux kernel.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add a simple FDT based regmap framework which is built on top of
generic regmap library. The phandle of FDT regmap DT node is treated
as unique regmap ID. The FDT based regmap drivers will be probed
on-demand from fdt_regmap_get_by_phandle() and fdt_regmap_get()
called by the regmap client drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add generic regmap access library which is independent of
hardware description format (FDT or ACPI). The OpenSBI platform
support or regmap drivers can register regmap instances which
can be discovered by different regmap clients based on the
unique ID of regmap instances.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The "driver" pointer in struct i2c_adapter is not used anywhere
so let us remove it.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Because the CSR names in the spec are mseccfg and mseccfgh. Remove
CSR_MSECCFG_LOWER and CSR_MSECCFG_UPPER and directly define
CSR_MSECCFG and CSR_MSECCFGH.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
commit 68e66106120f ("SUSP: Add SBI_ERR_DENIED") of the SBI spec adds
a new error code, SBI_ERR_DENIED, which is returned when entry criteria
has not be meant. Update the system suspend implementation to return
this error when it has detected that not all harts are in the STOPPED
state.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
With Smepmp enabled, it is necessary for shared memory from
S/U mode to be mapped/unmapped before and after read/write
of the memory region. This patch maps the debug console
shared memory before accessing it.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When Smepmp is enabled, M-mode will need to map/unmap the
shared memory before it can read/write to it. This patch
adds functions to create dynamic short-lived mappings.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
- If Smepmp is enabled, the access flags of an entry are determined based on
truth table defined in Smepmp.
- First PMP entry (index 0) is reserved.
- Existing boot PMP entries start from index 1.
- Since enabling Smepmp revokes the access privileges of the M-mode software
on S/U-mode region, first PMP entry is used to map/unmap the shared memory
between M and S/U-mode. This allows a temporary access window for the M-mode
software to read/write to S/U-mode memory region.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Configure PMP at last when all other initializations have been done.
Because if SMEPMP is detected, M-mode access to the S/U space will be
rescinded.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since pmp entries have implicit priority on index, previous entries will
deny access to SU on M-mode region. Also, M-mode will not have access to
SU region while previous entries will allow access to M-mode regions.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
- Add function to parse ISA string in FDT.
- Set Smepmp feature bit in extensions if "smepmp" string is found in ISA string.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Smepmp specification defines a truth table based on which the access is allowed to
different modes. This patch adds different flags based on this truth table.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
- Add a function to disable a given PMP entry.
- Add a function to check if a given entry is disabled.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, we see following compile error in the designeware GPIO driver
for RV32 systems:
lib/utils/gpio/fdt_gpio_designware.c:115:20: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
115 | chip->dr = (void *)addr + (bank * 0xc);
| ^
lib/utils/gpio/fdt_gpio_designware.c:116:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
116 | chip->ext = (void *)addr + (bank * 4) + 0x50;
We fix the above error using an explicit type-cast to 'unsigned long'.
Fixes: 7828eebaaa ("gpio/desginware: add Synopsys DesignWare APB GPIO support")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Fix special case: sbi_snprintf(out, out_len, ...) when out_len equal
1, The previous code will not fill the buffer with any char.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
A single scan of the format char may add multiple characters to the
tbuf, causing a buffer overflow. You should check if tbuf is full in
printc so that it does not cause a buffer overflow.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Because *out needs to reserve a byte to hold '\0', no more characters
should be added to the buffer when *out has one byte left, and the
buffer size *out_len should not be modified. this patch prevents
the correction of *out_len when *out_len is 1.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When doing width = width - strlen(string) in prints there is no need
to consider the case that witdh may be less than 0. This is because
the code to do filling needs to be executed under the condition that
width > 0.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The information of sg/b/letbase can be obtained by the type character,
simplifying the parameter by passing the type directly.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The space flag is used to add a space before positive numbers, and
apostrophe is used to print the thousand separator. Add code to
ignore these two flags
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Adds + flags for print, prefixing positive numbers with + when this
flags is present
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Left alignment and padding '0' should not exist at the same time,
this patch skips padding.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The flags for print should be able to appear in any order. The
previous code required the order to be fixed.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Fix Priv spec version typo in commit d4b563c881 ("lib: sbi: Remove MCOUNTEREN
and SCOUNTEREN hart features").
At least Priv spec v1.11 is required for [m|s]counteren and mcountinhibit CSRs.
Fixes: d4b563c881 ("lib: sbi: Remove MCOUNTEREN and SCOUNTEREN hart features")
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The hart_pmu_get_allowed_bits() function detects implemented bits
of mhpm counters so let us rename this function accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Let us follow alphabetical order for HART ISA extension so that
it is simpler to maintain.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Recently ratified Zihpm ISA extension covers all [m]hpm* CSRs
so we add Zihpm as a HART ISA extension in OpenSBI.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Recently ratified Zicntr ISA extension covers cycle, time and
instret CSRs so we replace the "time" ISA extension with "zicntr"
ISA extension in OpenSBI.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The cold_init() functions of ACLINT drivers should skip the HART
if sbi_hartid_to_scratch() returns NULL because we might be dealing
with a HART that is disabled in the device tree.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Add a driver for the Synopsys DesignWare APB GPIO IP block found in many
SoCs.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
On a misconfigured system we could access phs->active_events[] out of
bounds. Check that num_hw_ctrs is less or equal SBI_PMU_HW_CTR_MAX.
Addresses-Coverity-ID: 1566113 ("Out-of-bounds read")
Addresses-Coverity-ID: 1566114 ("Out-of-bounds write")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Do not ignore register A2 (high bits of physical address) in the dbcn
handler (RV64).
Signed-off-by: Gianluca Guida <gianluca@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The fdt_reset_thead driver needs to modify the __reset_thead_csr_stub
text region for the secondary harts booting. After that, the
sbi_hart_pmp_configure may lock down the text region with M_READABLE &
M_EXECUTABLE attributes in the future. Currently, the M_READABLE &
M_EXECUtABLE have no effect on m-mode, the L-bit in pmpcfg csr is
useless for the current opensbi scenario. See:
Priv-isa-spec 3.7.1.2. Locking and Privilege Mode
When the L bit is clear, any M-mode access matching the PMP entry will
succeed; the R/W/X permissions apply only to S and U modes.
That's why current fdt_reset_thead could still work well after commit:
230278dcf1 ("lib: sbi: Add separate entries for firmware RX and RW
regions"). So this patch fixes up a fake bug for the M-mode permission
setting of the future.
Fixes: 230278dcf1 ("lib: sbi: Add separate entries for firmware RX and RW regions")
Link: http://lists.infradead.org/pipermail/opensbi/2023-June/005176.html
Reported-by: Jessica Clarke <jrtc27@jrtc27.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
After the loop to find the hartid is launched, assigning -1 to
index will fail in the subsequent compare instruction bge. Fix
This.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This reverts commit 6966ad0abe ("platform/lib: Allow the OS to map the
regions that are protected by PMP").
It was thought at the time of this commit that allowing the kernel to map
PMP protected regions was safe but it is actually not: for example, the
hibernation process will try to access any linear mapping page and then
will fault on such mapped PMP regions [1]. Another issue is that the
device tree specification [2] states that a !no-map region must be
declared as EfiBootServicesData/Code in the EFI memory map which would make
the PMP protected regions reclaimable by the kernel. And to circumvent
this, RISC-V edk2 diverges from the DT specification to declare those
regions as EfiReserved.
The no-map attribute was removed to allow the kernel to use hugepages
larger than 2MB to map the linear mapping to improve the performance but
actually a recent talk from Mike Rapoport [3] stated that the
performance benefit was marginal.
For all those reasons, let's mark all the PMP protected regions as "no-map".
[1] https://lore.kernel.org/linux-riscv/CAAYs2=gQvkhTeioMmqRDVGjdtNF_vhB+vm_1dHJxPNi75YDQ_Q@mail.gmail.com/
[2] "3.5.4 /reserved-memory and UEFI" https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4-rc1/devicetree-specification-v0.4-rc1.pdf
[3] https://lwn.net/Articles/931406/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Over-time a lot of organizations and individuals have contributed to
the OpenSBI project so let us add copyright RISC-V International to
respect the contributions from all RISC-V members.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
We do have an official OpenSBI logo which was designed few months ago
and was also approved by RISC-V International. Lets add this logo
under docs and also use it in the top-level README.md
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Instead of using a global array indexed by hartid, we should use
scratch space to save per-HART IMSIC pointer and IMSIC file number.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
The imsic_map_hartid_to_data() already checks hartid before using
so we don't need to check in imsic_update_hartid_table().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Instead of using a global array indexed by hartid, we should use
scratch space to save per-HART PLIC pointer and PLIC context numbers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Instead of using a global array indexed by hartid, we should use
scratch space to save per-HART MTIMER pointer.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Instead of using a global array indexed by hartid, we should use
scratch space to save per-HART MSWI pointer.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Let's use heap allocation in FDT domain parsing instead of using
a fixed size global array.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Let's use heap allocation in ACLINT MTIMER driver instead of using
a fixed size global array.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Let's use heap allocation in PLIC, APLIC, and IMSIC irqchip drivers
instead of using a fixed size global array.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Let's use heap allocation in ACLINT MSWI driver instead of using
a fixed size global array.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Let's use heap allocation in DesignWare and SiFive I2C drivers
instead of using a fixed size global array.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Let's use heap allocation in SiFive and Starfive GPIO drivers
instead of using a fixed size global array.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Instead of using a global array indexed by hartid, we should use
scratch space to save per-HART domain pointer.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Let's use heap allocation in root domain creation instead of using
a fixed size global array.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Instead of using a global array for per-HART PMU state, we should
use heap to on-demand allocate per-HART PMU state when the HART
is initialized in cold boot or warm boot path.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
The scratch space being a scarce resource so let us print it's
size and usage at boot time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
We provide simple heap allocator to manage the heap space provided
by OpenSBI firmware and platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
We extend struct sbi_platform and struct sbi_scratch to allow platforms
specify the heap size to the OpenSBI firmwares. The OpenSBI firmwares
will use this information to determine the location of heap and provide
heap base address in per-HART scratch space.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reading and writing a data type in scratch space is a very common
use-case so let us add related helper macros in sbi_scratch.h.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The spec says sbi_system_suspend() will return SBI_ERR_INVALID_PARAM
when "sleep_type is reserved or is platform-specific and unimplemented"
and SBI_ERR_NOT_SUPPORTED when sleep_type "is not reserved and is
implemented, but the platform does not support it due to one or more
missing dependencies." Ensure SBI_ERR_INVALID_PARAM is returned for
reserved sleep types and that the system suspend driver can choose
which of the two error types to return itself by returning an error
from its check function rather than a boolean.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The parameter checks in aclint_mswi_cold_init() don't guard against a
buffer overrun.
mswi_hartid2data is defined as an array of SBI_HARTMASK_MAX_BITS entries.
The current check allows
mswi->hart_count = ACLINT_MSWI_MAX_HARTS
mswi->first_hartid = SBI_HARTMASK_MAX_BITS - 1.
With these values mswi_hartid2data will be accessed at index
SBI_HARTMASK_MAX_BITS + SBI_HARTMASK_MAX_BITS - 2.
We have to check the sum of mswi->first_hartid and mswi->hart_count.
Furthermore mswi->hart_count = 0 would not make much sense.
Addresses-Coverity-ID: 1529705 ("Out-of-bounds write")
Fixes: 5a049fe1d6 ("lib: utils/ipi: Add ACLINT MSWI library")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
A final check of all DT nodes does not necessarily find a match, so
SBI_ENODEV needs to be returned. Optimize removal of current_driver.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
console is not a required peripheral. So it should return success when
the console does not exist.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Adds the `-L` flag (follow symlinks) to the `cp` commands used to
install `libsbi.a` and `include/sbi/*`.
This should make no difference in regular compilation. However,
it does make a difference when compiling with bazel. Namely,
bazel's sandboxing will turn all the source files into symlinks.
After installation with `cp` the destination files will be
symlinks pointing to the sandbox symlinks. As the sandbox files
are removed when compilation ends, the just-copied symlinks
become dangling symlinks.
The resulting include files will be
unusable due to the dangling symlink issues. Adding `-L` when
copying ensures that the files obtained by executing the `install`
targets are always dereferenced to files, rather than symlinks,
eliminating this issue.
Signed-off-by: Filip Filmar <fmil@google.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
With the introduction of the register_extensions callback the
range members (extid_start and extid_end) may now change and it
has become a bit subtle as to when a probe function should be
implemented. Document all the members and their relationship to
the register_extensions callback.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When a probe implementation just returns zero for not available and
one for available then we don't need it, as the extension won't be
registered at all if it would return zero and the Base extension
probe function will already set out_val to 1 if not probe function
is implemented. Currently all probe functions only return zero or
one, so remove them all.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
No need to do a fully comprehensive count, just find a supported reset
or suspend type
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When an extension implements a probe function it means there's a
chance that the extension is not available. Use this function in the
register_extensions callback to determine if the extension should be
registered at all. Where the probe implementation is simple, just
open code the check.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The absence of a probe implementation means that the extension is
always available. Remove the implementation for the PMU extension,
which does no checking, and indeed even has a comment saying it's
always available.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The vendor extension ID range is large, but at runtime at most
a single ID will be available. Narrow the range in the
register_extensions callback. After narrowing, we no longer
need to check that the extension ID is correct in the other
callbacks, as those callbacks will never be invoked with
anything other than the single ID.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Rather than registering all extensions on their behalf in
sbi_ecall_init(), introduce another extension callback and
invoke that instead. For now, implement each callback by
simply registering the extension, which means this patch
has no intended functional change. In later patches, extension
callbacks will be modified to choose when to register and to
possibly narrow the extension ID range prior to registering.
When an extension range needs to remove IDs, leaving gaps, then
multiple invocations of sbi_ecall_register_extension() may be
used. In summary, later patches for current extensions and the
introductions of future extensions will use the new callback to
ensure that only valid extension IDs from the initial range,
which are also available, will be registered.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We have redundant semicolon at quite a few places so let's remove it.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since sbi_pmu_init is called after sbi_console_init,
the sbi_printf can be called when sbi_pmu_init fails.
Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The legacy console getchar SBI call returns character value in
the sbiret.error field so the "SBI_SUCCESS < ret" check in
sbi_ecall_handler() results in unwanted error prints for the
legacy console getchar SBI call. Let's suppress these unwanted
error prints.
Fixes: 67b2a40892 ("lib: sbi: sbi_ecall: Check the range of
SBI error")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
As per the SBI specification, we should "unconditionally select the first
counter from the set of counters specified by the counter_idx_base and
counter_idx_mask", so implement this behaviour.
Suggested-by: Atish Patra <atishp@atishpatra.org>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Those events are enabled by default and should not be reset afterwards
since when using SBI_PMU_CFG_FLAG_SKIP_MATCH, it leads to unaccessible
counters after the first use.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The codes currently skip the very first relocation entry, but later
reference the elements in the relocation entry using minus offsets.
Change to use positive offsets so that there is no need to skip the
first relocation entry.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>
I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.
IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC (which is based on Andes AX45MP core) due to this reason IP blocks
using DMA will fail.
As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.
SBI_EXT_ANDES_IOCP_SW_WORKAROUND checks if the IOCP errata should be
applied to handle cache management.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
When tlb_fifo is full, it will wait and affect the ipi update to
other harts. This patch is optimized.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
tlb_process_count is only used when count=1, so refactor to
tlb_process_once and add the return value to be reused in
tlb_process
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
The original sbi_ipi will be processed by hart by hart, after optimization,
send ipi first and finally wait together.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Originally, the process and sync of sbi_tlb need to wait for each other.
Evasion by atomic addition and subtraction.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
fdt_reserved_memory_fixup() uses filtered_order[PMP_COUNT]. The index
must not reach PMP_COUNT.
Fixes: 199189bd1c ("lib: utils: Mark only the largest region as reserved in FDT")
Addresses-Coverity-ID: 1536994 ("Out-of-bounds write")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When using `PLATFORM=generic` defaults, the kernel is loaded at
`FW_JUMP_ADDR`, and the FDT is loaded at `FW_JUMP_FDT_ADDR.
Therefore, the maximum kernel size before `FW_JUMP_FDT_ADDR` must
be increased is `$(( FW_JUMP_FDT_ADDR - FW_JUMP_ADDR ))`.
The example calculation assumes `rv64`, and is wrong to boot
(off by 0x200000). Fix it and update it for the general case.
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The bits encoded in event_idx[19:16] indicate the event type, with
an offset of 16 instead of 20.
Fixes: 13d40f21d5 ("lib: sbi: Add PMU support")
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Implement SBI CPPC extension. This extension is only available when
OpenSBI platform provides a CPPC device to generic library.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If mip.SEIP bit is not cleared then on HiFive Unmatched board it causes
spurious external interrupts. This breaks the boot up of HiFive Unmatched
board. Hence it is required to bring the mip CSR to a known state during
hart init and avoid spurious interrupts.
Fixes: d9e7368 ("firmware: Not to clear all the MIP")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
It possible that a platform supports hart hotplug (i.e. both hart_start
and hart_stop callbacks available) and all harts are start simultaneously
at platform boot-time. In this situation, the sbi_hsm_hart_start() will
call hsm_device_hart_start() for secondary harts at platform boot-time
which will fail because secondary harts were already started.
To fix above, we call hsm_device_hart_start() from sbi_hsm_hart_start()
only when entry_count is same as init_count for the secondary hart.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We introduce sbi_entry_count() function which counts the number
of times a HART enters OpenSBI via cold-boot or warm-boot path.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Because firmware is split into rw/rx segments, it cannot be recorded
by a root_fw_region. This problem is solved by adding a flag
fw_region_inited to sbi_domain.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since commit 50d4fde1c5 ("lib: Remove redundant sbi_platform_ipi_clear()
calls"), the IPI sent from the boot hart in wake_coldboot_harts() is not
cleared in the secondary harts until they reach sbi_ipi_init(). However,
sbi_hsm_init() and sbi_hsm_hart_wait() are called earlier, so a secondary
hart might enter sbi_hsm_hart_wait() with an already pending IPI.
sbi_hsm_hart_wait() makes sure the hart leaves the loop only when it is
actually ready, so a pending unrelated IPI should not cause safety issues.
However, it might be inefficient on certain hardware, because it prevents
"wfi" from stalling the hart even if the hardware supports this, making the
hart needlessly spin in a "busy-wait" loop.
This behaviour can be observed, for example, in a QEMU VM (QEMU 7.2.0) with
"-machine virt" running a Linux guest. Inserting delays in
sbi_hsm_hart_start() allows reproducing the issue more reliably.
The comment in wait_for_coldboot() suggests that the initial IPI is needed
in the warm resume path, so let us clear it before init_warm_startup()
only.
To do this, sbi_ipi_raw_clear() was created similar to sbi_ipi_raw_send().
Signed-off-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When a boot hart executes sbi_hsm_hart_start() to start a secondary hart,
next_arg1, next_addr and next_mode for the latter are stored in the scratch
area after the state has been set to SBI_HSM_STATE_START_PENDING.
The secondary hart waits in the loop with wfi() in sbi_hsm_hart_wait() at
that time. However, "wfi" instruction is not guaranteed to wait for an
interrupt to be received by the hart, it is just a hint for the CPU.
According to RISC-V Privileged Architectures spec. v20211203, even an
implementation of "wfi" as "nop" is legal.
So, the secondary might leave the loop in sbi_hsm_hart_wait() as soon as
its state has been set to SBI_HSM_STATE_START_PENDING, even if it got no
IPI or it got an IPI unrelated to sbi_hsm_hart_start(). This could lead to
the following race condition when booting Linux, for example:
Boot hart (#0) Secondary hart (#1)
runs Linux startup code waits in sbi_hsm_hart_wait()
sbi_ecall(SBI_EXT_HSM,
SBI_EXT_HSM_HART_START,
...)
enters sbi_hsm_hart_start()
sets state of hart #1 to START_PENDING
leaves sbi_hsm_hart_wait()
runs to the end of init_warmboot()
returns to scratch->next_addr
(next_addr can be garbage here)
sets next_addr, etc. for hart #1
(no good: hart #1 has already left)
sends IPI to hart #1
(no good either)
If this happens, the secondary hart jumps to a wrong next_addr at the end
of init_warmboot(), which leads to a system hang or crash.
To reproduce the issue more reliably, one could add a delay in
sbi_hsm_hart_start() after setting the hart's state but before sending
IPI to that hart:
hstate = atomic_cmpxchg(&hdata->state, SBI_HSM_STATE_STOPPED,
SBI_HSM_STATE_START_PENDING);
...
+ sbi_timer_mdelay(10);
init_count = sbi_init_count(hartid);
rscratch->next_arg1 = arg1;
rscratch->next_addr = saddr;
The issue can be reproduced, for example, in a QEMU VM with '-machine virt'
and 2 or more CPUs, with Linux as the guest OS.
This patch moves writing of next_arg1, next_addr and next_mode for the
secondary hart before setting its state to SBI_HSM_STATE_START_PENDING.
In theory, it is possible that two or more harts enter sbi_hsm_hart_start()
for the same target hart simultaneously. To make sure the current hart has
exclusive access to the scratch area of the target hart at that point, a
per-hart 'start_ticket' is used. It is initially 0. The current hart tries
to acquire the ticket first (set it to 1) at the beginning of
sbi_hsm_hart_start() and only proceeds if it has successfully acquired it.
The target hart reads next_addr, etc., and then the releases the ticket
(sets it to 0) before calling sbi_hart_switch_mode(). This way, even if
some other hart manages to enter sbi_hsm_hart_start() after the ticket has
been released but before the target hart jumps to next_addr, it will not
cause problems.
atomic_cmpxchg() already has "acquire" semantics, among other things, so
no additional barriers are needed in hsm_start_ticket_acquire(). No hart
can perform or observe the update of *rscratch before setting of
'start_ticket' to 1.
atomic_write() only imposes ordering of writes, so an explicit barrier is
needed in hsm_start_ticket_release() to ensure its "release" semantics.
This guarantees that reads of scratch->next_addr, etc., in
sbi_hsm_hart_start_finish() cannot happen after 'start_ticket' has been
released.
Signed-off-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Move them into sbi_hsm_hart_start_finish() and sbi_hsm_hart_resume_finish()
to make them easier to manage.
This will be used by subsequent patches.
Suggested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Platform specific firmware event handler may leverage the hartid to program
per hart specific registers for a given counter.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add fw_counter_write_value API for platform specific firmware events
which separates setting the counter's initial value from starting the
counter. This is required so that the fw_event_data array can be reused
to save the event data received.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For all platform specific firmware event operations use the dedicated
event code (0xFFFF) when matching against the input firmware event.
Furthermore save the real platform specific firmware event code received as
the event data for future use.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Update fw_event_validate_code, fw_counter_match_code and fw_counter_start
ops which used a 32 bit event code to use the 64 bit event data instead.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Rename and reuse fw_counter_value array to save both the counter values
for the SBI firmware events and event data for the SBI platform specific
firmware events.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
We reserve space for SBI implementation specific custom firmware
events which can be used by M-mode firmwares and HS-mode hypervisors
for their own use. This reserved space is intentionally large to
ensure that SBI implementation has enough space to accommodate
platform specific firmware events as well.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
To support 64 bit firmware counters on RV32 systems, we implement
sbi_pmu_counter_fw_read_hi() which returns the upper 32 bits of
the firmware counter value. On RV64 (or higher) systems, this
function will always return zero.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch adds a callback to fetch the number of bits implemented for a
custom firmware counter. If the callback fails or is not implemented then
width defaults to 63.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The Cadence driver does not use the RX byte status feature and hence can
be advertised to be compatible with cdns,uart-r1p8 as well.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
add reboot and poweroff support. The whole reboot and shutdown
pm op includes shutdown jh7110 pmu device power domain
and access on board pmic register through I2C.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Starfive JH7110 I2C IP is synopsys designware.
Minimum StarFIve I2C driver to read/send bytes over I2C bus.
This allows querying information and perform operation of onboard PMIC,
as well as power-off and reset.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add a new make command line option "make DEBUG=1" to prevent compiler
optimizations using -O2.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When the system-suspend-test property is present in the domain config
node as shown below, implement system suspend with a simple 5 second
delay followed by a WFI. This allows testing system suspend when the
low-level firmware doesn't support it.
/ {
chosen {
opensbi-domains {
compatible = "opensbi,domain,config";
system-suspend-test;
};
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Fill the implementation of the system suspend ecall. A platform
implementation of the suspend callbacks is still required for this
to do anything.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Only privileged domains should be allowed to suspend the entire
system. Give the root domain this property by default and allow
other domains to be given the property by specifying it in the
DT.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add the SUSP extension probe and ecall support, but for now the
system suspend function is just a stub.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
A coming patch can make use of a few internal hsm functions if
we export them.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
While non-retentive suspend is not allowed for M-mode, the comment
at the top of sbi_hsm_hart_suspend() implied suspend wasn't allowed
for M-mode at all. Move the comment above the mode check which is
inside a suspend type is non-retentive check.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
HSM functions define when SBI_ERR_INVALID_PARAM should be returned.
Ensure it's not used for reasons that don't meet the definitions by
using the catch-all code, SBI_ERR_FAILED, for those reasons instead.
Also, in one case sbi_hart_suspend() may have returned SBI_ERR_DENIED,
which isn't defined for that function at all. Use SBI_ERR_FAILED for
that case too.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When a state change fails there's no need to restore the original
state as it remains the same.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Remove some redundant code by creating an invalid state detection
macro.
No functional change intended.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
commit 3e2f573e70 ("lib: utils: Disallow non-root domains from adding M-mode regions")
added access permission check in __fdt_parse_region(). With the
existing DT example in the doc OpenSBI won't boot anymore.
Let's update the DT example so that it can work out of the box.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
The region access permission check in __fdt_parse_region() can be
simplified as masking SBI_DOMAIN_MEMREGION_{M,SU}_ACCESS_MASK is
enough.
While we are here, update the confusing comments to match the codes.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
On the Renesas RZ/Five SoC by default we want to configure 128MiB of memory
ranging from 0x58000000 as a non-cacheable + bufferable region in the PMA
and populate this region as PMA reserve DT node with shared DMA pool and
no-map flags set so that Linux drivers requesting any DMA'able memory go
through this region.
PMA node passed to the above stack:
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
I/O Coherence Port (IOCP) provides an AXI interface for connecting
external non-caching masters, such as DMA controllers. The accesses
from IOCP are coherent with D-Caches and L2 Cache.
IOCP is a specification option and is disabled on the Renesas RZ/Five
SoC due to this reason IP blocks using DMA will fail.
The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
block that allows dynamic adjustment of memory attributes in the runtime.
It contains a configurable amount of PMA entries implemented as CSR
registers to control the attributes of memory locations in interest.
Below are the memory attributes supported:
* Device, Non-bufferable
* Device, bufferable
* Memory, Non-cacheable, Non-bufferable
* Memory, Non-cacheable, Bufferable
* Memory, Write-back, No-allocate
* Memory, Write-back, Read-allocate
* Memory, Write-back, Write-allocate
* Memory, Write-back, Read and Write-allocate
More info about PMA (section 10.3):
Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
As a workaround for SoCs with IOCP disabled CMO needs to be handled by
software. Firstly OpenSBI configures the memory region as
"Memory, Non-cacheable, Bufferable" and passes this region as a global
shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
allocations happen from this region and synchronization callbacks are
implemented to synchronize when doing DMA transactions.
Example PMA region passed as a DT node from OpenSBI:
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
pma_resv0@58000000 {
compatible = "shared-dma-pool";
reg = <0x0 0x58000000 0x0 0x08000000>;
no-map;
linux,dma-default;
};
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As-per the SBI specification, the lower 24bits of the SBI vendor
extension id is same as lower 24bits of the mvendorid CSR.
We update the SBI vendor extension id checking based on above.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
According to the description in "riscv-state-enable[0]", to access
h/scontext in S-Mode, we need to enable the 57th bit.
If it is not enabled, an "illegal instruction" error will occur.
Link: a28bfae443/content.adoc [0]
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In docs/firmware/fw.md, there's a configuration parameter called
FW_TEXT_ADDR, which actually should be FW_TEXT_START, so fix it.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When building with GCC-10 or older versions, it throws the following
error:
CC-DEP platform/generic/lib/utils/fdt/fdt_fixup.dep
CC platform/generic/lib/utils/fdt/fdt_fixup.o
lib/utils/fdt/fdt_fixup.c: In function 'fdt_reserved_memory_fixup':
lib/utils/fdt/fdt_fixup.c:376:2: error: label at end of compound statement
376 | next_entry:
| ^~~~~~~~~~
Remove the goto statement.
Resolves: https://github.com/riscv-software-src/opensbi/issues/288
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
In sbi_domain_finalize(), when locating the coldboot hart's domain,
the coldboot hart's scratch->arg1 will be overwritten by the domain
configuration. However scratch->arg1 holds the FDT address of the
coldboot hart, and is still being accessed by fdt_get_address() in
later boot process. scratch->arg1 could then contain completely
garbage and lead to a crash.
To fix this, we change fdt_get_address() to return root domain's
next_arg1 as the FDT pointer.
Resolves: https://github.com/riscv-software-src/opensbi/issues/281
Fixes: b1678af210 ("lib: sbi: Add initial domain support")
Reported-by: Marouene Boubakri <marouene.boubakri@nxp.com>
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
The code calls various macros from riscv_asm.h which is not directly
included. Fix such dependency.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
The code calls various macros from riscv_asm.h and sbi_scratch.h
which are not directly included. Fix such dependency.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
The code calls sbi_scratch_thishart_ptr() from sbi_scratch.h which
is not directly included. Fix such dependency.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_printf() is slow for semihosting because it prints one
character at a time. To speed-up sbi_printf() for semihosting,
we use a temporary buffer and nputs().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
We add console_puts() callback in the console device which allows
console drivers (such as semihosting) to implement a specialized
way to output character string.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
We implement SBI debug console extension as one of the replacement
SBI extensions. This extension is only available when OpenSBI platform
provides a console device to generic library.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
The BSWAPx() macros won't do any swapping for big-endian host
because the EXTRACT_BYTE() macro will pickup bytes in reverse
order. Also, the EXTRACT_BYTE() will generate compile error
for constants.
To fix this, we get remove the EXTRACT_BYTE() macro and re-write
BSWAPx() using simple mask and shift operations.
Fixes: 09b34d8cca ("include: Add support for byteorder/endianness
conversion")
Reported-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
If any variable/memory-location follows certain
endianness then its important to annotate it properly
so that proper conversion can be done before read/write
from that variable/memory.
Also, use these new typedefs in libfdt_env.h for deriving
its own custom fdtX_t types
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
FDT follows big-endian and CPU can be little or big
endian as per the implementation.
libfdt_env.h defines function for conversion between
fdt and cpu byteorder according to the endianness.
Currently, libfdt_env.h defines custom byte swapping
macros and then undefines them. Instead, use the generic
endianness conversion functions
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since we don't currently create these, changes to fw_base.ldS do not
cause the preprocessed fw_*.elf.ld files to be rebuilt, and thus
incremental builds can end up failing with missing symbols if crossing
the recent commits that introduced _fw_rw_offset and then replaced it
with _fw_rw_start.
Reported-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sbi_domain_for_each() requires domidx_to_domain_table[] to be
null-terminated. Allocate one extra element which will always
be null.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In commit 230278dcf, RX and RW regions were marked separately.
When the RW region grows (e.g. with more harts) and it isn't a
power-of-two, sbi_domain_memregion_init will upgrade the region
to the next power-of-two. This will make RX and RW both start
at the same base address, like so (with 64 harts):
Domain0 Region01 : 0x0000000080000000-0x000000008001ffff M: (R,X) S/U: ()
Domain0 Region02 : 0x0000000080000000-0x00000000800fffff M: (R,W) S/U: ()
This doesn't break the permission enforcement because of static
priorities in PMP but makes the kernel complain about the regions
overlapping each other. Like so:
[ 0.000000] OF: reserved mem: OVERLAP DETECTED!
[ 0.000000] mmode_resv0@80000000 (0x0000000080000000--0x0000000080020000) \
overlaps with mmode_resv1@80000000 (0x0000000080000000--0x0000000080100000)
To fix this warning, among the multiple regions having same base
address but different sizes, add only the largest region as reserved
region during fdt fixup.
Fixes: 230278dcf (lib: sbi: Add separate entries for firmware RX and RW regions)
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If we use the csr_write to restore the MIP, we may clear the SEIP.
In generic behavior of QEMU, if the pending bits of PLIC are set and we
clear the SEIP, the QEMU may not set it back immediately. It may cause
the interrupts won't be handled anymore until the new interrupts arrived
and QEMU set the bits back.
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In generic behavior of QEMU, if the pending bits of PLIC are still set and
we clear the SEIP, the QEMU may not set the SEIP back immediately and the
interrupt may not be handled anymore until the new interrupts arrived and
QEMU set the SEIP back which is a generic behavior in QEMU.
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Signed-off-by: Jim Shu <jim.shu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
It seems BFD just does totally nonsensical things for SHN_ABS symbols
when producing position-independent outputs (both -pie and -shared)
for various historical reasons, and so SHN_ABS symbols are still
subject to relocation as far as BFD is concerned (except AArch64,
which fixes it in limited cases that don’t apply here...).
The above affects the _fw_rw_offset provided through fw_base.ldS
linker script which results in OpenSBI firmware failing to boot
when loaded at an address different from FW_TEXT_START.
Fixes: c10e3fe5f9 ("firmware: Add RW section offset in scratch")
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add D1's nonretentive suspend state to the devicetree so S-mode software
knows about it and can use it.
Latency and power measurements were taken on an Allwinner Nezha board:
- Entry latency was measured from the beginning of sbi_ecall_handler()
to before the call to wfi() in sun20i_d1_hart_suspend().
- Exit latency was measured from the beginning of sbi_init() to before
the call to sbi_hart_switch_mode() in init_warmboot().
- There was a 17.5 mW benefit from non-retentive suspend compared to
WFI, with a 170 mW cost during the 107 us entry/exit period. This
provides a break-even point around 1040 us. Residency includes entry
latency, so round this up to 1100 us.
- The hardware power sequence latency (after the WFI) is assumed to be
negligible, so set the wakeup latency to the exit latency.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Since the availability and latency properties of CPU idle states depend
on the specific SBI HSM implementation, it is appropriate that the idle
states are added to the devicetree at runtime by that implementation.
This helper function adds a platform-provided array of idle states to
the devicetree, following the SBI idle state binding.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Renesas RZ/Five RISC-V SoC has Instruction local memory and Data local
memory (ILM & DLM) mapped between region 0x30000 - 0x4FFFF. When a
virtual address falls within this range, the MMU doesn't trigger a page
fault; it assumes the virtual address is a physical address which can
cause undesired behaviours for statically linked applications/libraries.
To avoid this, add the ILM/DLM memory regions to the root domain region
of the PMPU with permissions set to 0x0 for S/U modes so that any access
to these regions gets blocked and for M-mode we grant full access (R/W/X).
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add two entries for firmware in the root domain:
1. TEXT: fw_start to _fw_rw_offset with RX permissions
2. DATA: _fw_rw_offset to fw_size with RW permissions
These permissions are still not enforced from M-mode but lay
the ground work for enforcing them for M-mode. SU-mode don't
have any access to these regions.
Sample output:
Domain0 Region01 : 0x0000000080000000-0x000000008001ffff M: (R,X) S/U: ()
Domain0 Region02 : 0x0000000080020000-0x000000008003ffff M: (R,W) S/U: ()
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Print the RW section offset when firmware base and size is
being printed.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add the RW section offset, provided by _fw_rw_offset symbol,
to the scratch structure. This will be used to program
separate pmp entry for RW section.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the dynsym and reladyn sections are under RW data.
They are moved to the Read-only/Executable region.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Split the RO/RX and RW sections so that they can have
independent pmp entries with required permissions. The
split size is ensured to be a power-of-2 as required by
pmp.
_fw_rw_offset symbol marks the beginning of the data
section.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The commit 9e0ba090 introduced more fine grained permissions for memory
regions and did not update the fdt_reserved_memory_fixup() function. As
a result, the fdt_reserved_memory_fixup continued to use the older coarse
permissions which causes the reserved memory node to be not inserted
into the DT.
To fix the above issue, we correct the flags used for memory region
permission checks in the fdt_reserved_memory_fixup() function.
Fixes: 9e0ba090 ("include: sbi: Fine grain the permissions for M and SU modes")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add hart_start() and hart_stop() callbacks for the multi-core ae350
platform, it utilizes the ATCSMU to put the harts into power-gated
deep sleep mode. The programming sequence is stated as below:
1. Set the wakeup events to PCSm_WE
2. Set the sleep command to PCSm_CTL
3. Set the reset vector to HARTm_RESET_VECTOR_{LO|HI}
4. Write back and invalidate D-cache by executing the CCTL command L1D_WBINVAL_ALL
5. Disable I/D-cache by clearing mcache_ctl.{I|D}C_EN
6. Disable D-cache coherency by clearing mcache_ctl_.DC_COHEN
7. Wait for mcache_ctl.DC_COHSTA to be cleared to ensure the previous step is completed
8. Execute WFI
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch adds atcsmu support for Andes AE350 platforms. The SMU
provides system management capabilities, including clock, reset
and power control based on power domain partitions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Make use of generic warm-boot path when platform hart_stop callback
returns SBI_ENOTSUPP, in case certain hart can not turn off its
power domain, or it detects some error occured in power management
unit, it can fall through warm-boot flow and wait for interrupt in
sbi_hsm_hart_wait().
Also improves comment in sbi_hsm_hart_wait().
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The two referenced commits passed incorrect bounds to the PLIC save/
restore functions, causing out-of-bounds memory access. The functions
expect "num" to be the 1-based number of interrupt sources, equivalent
to the "riscv,ndev" devicetree property. Thus, "num" must be strictly
smaller than the 0-based size of the array storing the register values.
However, the referenced commits incorrectly passed in the unmodified
size of the array as "num". Fix this by reducing PLIC_SOURCES (matching
"riscv,ndev" on this platform), while keeping the same array sizes.
Addresses-Coverity-ID: 1530251 ("Out-of-bounds access")
Addresses-Coverity-ID: 1530252 ("Out-of-bounds access")
Fixes: 8509e46ca6 ("lib: utils/irqchip: plic: Ensure no out-of-bound access in priority save/restore helpers")
Fixes: 9a2eeb4aae ("lib: utils/irqchip: plic: Ensure no out-of-bound access in context save/restore helpers")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Updated the various permissions bits available for domains
defined in DT node and restrictions on them.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
The M-mode regions can only be added to the root domain. The non-root
domains shouldn't be able to add them from FDT.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
With the finer permission semantics, the region access
permissions must be displayed separately for M and SU mode.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Use the fine grained permission bits to decide if the region
permissions are to be enforced on all modes. Also use the new
permission bits for deciding on R/W/X bits in pmpcfg register.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Split the permissions for M-mode and SU-mode. This would
help if different sections of OpenSBI need to be given
different permissions and if M-mode has different permisssions
than the SU-mode over a region.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
The RISC-V convention for the privilege mode is capital letter, like
'M-mode', instead of 'm-mode'.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
'priv' argument of sbi_hsm_hart_start() and sbi_hsm_hart_suspend()
may mislead people to think it stands for 'privilege mode', but it
is not. Change it to 'arg1' to clearly indicate the a1 register.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We add a generic platform override callback to allow platform specific
selection of cold boot HART.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We add an optional cold_boot_allowed() platform callback which allows
platform support to decide which HARTs can do cold boot initialization.
If this platform callback is not available then any HART can do cold
boot initialization.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
commit 6dde43584f ("lib: utils/sys: Extend HTIF library to allow custom base address")
forgot to update do_tohost_fromhost() codes for RV32, which still
accesses the HTIF registers using the ELF symbol address directly.
Fixes: 6dde43584f ("lib: utils/sys: Extend HTIF library to allow custom base address")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
-N option coalesce all sections into single LOAD segment which causes
data and other sections to have executable permission causing warning
with new binutils ld 2.39.
New ld emits warning when any segment have all three permissions RWX.
ld.bfd: warning: test.elf has a LOAD segment with RWX permissions
ld.bfd: warning: fw_dynamic.elf has a LOAD segment with RWX permissions
ld.bfd: warning: fw_jump.elf has a LOAD segment with RWX permissions
ld.bfd: warning: fw_payload.elf has a LOAD segment with RWX permissions
This option was added in below commit -
commit: eeab92f242 ("Makefile: Convert to a more standard format")
Removing -N option allows to have text and rodata into one LOAD
segment and other sections into separate LOAD segment which prevents
RWX permissions on single LOAD segment. Here X == E
Current
LOAD 0x0000000000000120 0x0000000080000000 0x0000000080000000
0x000000000001d4d0 0x0000000000032ed8 RWE 0x10
-N removed
LOAD 0x0000000000001000 0x0000000080000000 0x0000000080000000
0x00000000000198cc 0x00000000000198cc R E 0x1000
LOAD 0x000000000001b000 0x000000008001a000 0x000000008001a000
0x00000000000034d0 0x0000000000018ed8 RW 0x1000
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Samuel Holland <samuel@sholland.org>
C language standard uses true/false for the boolean type.
Let's switch to that for better language compatibility.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Since commit b28f070, it is possible for platforms to run perf monitoring
even if mcountinhibit is not supported. Sampling still won't be possible
though as it requires sscofpmf extension.
Update the docs to remove the restriction.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
event-to-mhpmevent was deprecated and replaced by
riscv,event-to-mhpmevent, but a reference remains to the old name.
Replace it with the new one.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The first PMU binding example does not terminate properties with a ;,
which is invalid. Noticed while converting the binding to yaml.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
As we already added the quirk for lacking mtime register to MTIMER
driver, add T-Head C9xx CLINT compatible to it and wire the quirk.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>
T-Head developers surely have a different understanding of time CSR and
CLINT's mtime register with SiFive ones, that they did not implement
the mtime register at all -- as shown in openC906 source code, their
time CSR value is just exposed at the top of their processor IP block
and expects an external continous counter, which makes it not
overrideable, and thus mtime register is not implemented, even not for
reading. However, if CLINTEE is not enabled in T-Head's MXSTATUS
extended CSR, these systems still rely on the mtimecmp registers to
generate timer interrupts. This makes it necessary to implement T-Head
C9xx CLINT support in OpenSBI MTIMER driver, which skips implementing
reading mtime register and falls back to default code that reads time
CSR.
Add a quirk into MTIMER driver, which represents a mtime register is
lacking and time CSR value should be used instead.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>
Althoug the MTIMER part of a C9xx CLINT differs from a SiFive one, the
MSWI part is compliant.
Add T-Head C9xx CLINT compatible string to fdt_ipi_mswi code, sharing
the same codepath with SiFive CLINT.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently the context save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.
Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
plic->num_src holds the number of interrupt sources without interrupt
source 0 but the interrupt enable register includes a bit for the
interrupt source 0 in the first word.
Fixes: 415ecf28f7 ("lib: irqchip/plic: Add context save/restore helpers")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
The number of interrupt enable register in words was once correct,
but was wrongly changed to have an off-by-one error since
commit 8c362e7d06 ("lib: irqchip/plic: Factor out a context init function").
Fixes: 8c362e7d06 ("lib: irqchip/plic: Factor out a context init function")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Currently the priority save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.
Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add compatible string for Andestech NCEPLIC100 found on Renesas RZ/Five SoC
which is equipped with AX45MP AndesCore.
While at it drop the comma after the sentinel as it does not make sense to
have a comma after a sentinel, as any new elements must be added before the
sentinel.
dts example (Single-core AX45MP):
soc: soc {
....
plic: interrupt-controller@12c00000 {
compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
#interrupt-cells = <2>;
#address-cells = <0>;
riscv,ndev = <511>;
interrupt-controller;
reg = <0x0 0x12c00000 0 0x400000>;
clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
power-domains = <&cpg>;
resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
};
....
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Not all systems have bash at a fixed location like /bin/bash.
FreeBSD, for example, would typically have it at /usr/local/bin/bash.
When building OpenSBI on freebsd system, the build breaks.
Its advisable to use: #!/usr/bin/env bash
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As per section 3.7.2 of RISC-V Privileged Specification,
PMP settings must be synchronized with the virtual memory
system after PMP settings have been written.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If fdt_getprop() returns NULL, this indicates an error. In this case lenp
is set to an error code. But even if lenp = 0 we should not continue.
If fdt_getprop() returns a wider value than we expect this is a separate
error condition.
In both cases the device-tree is invalid.
Addresses-Coverity-ID: 1529703 ("Dereference after null check")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For 'reg->order == __riscv_xlen' the term 'BIT(reg->order)' is undefined.
Addresses-Coverity-ID: 1529706 ("Bad bit shift operation")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
It makes sense to use fdt_match_node() instead of fdt_find_match()
in fw_platform_lookup_special() as we already have the start offset
to search from.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The andes-specific files have been moved to generic platform so we
can drop this line.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Update compile option and platform compatible string for AE350 and
add it to the generic platform list.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
We move andes directory to platform/generic as the necessary fdt
drivers are available, the users can enable the console, timer, ipi,
irqchip and reset devices by adding device tree nodes stated in the
docs/platform/andes-ae350.md.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
The t3 register stores the address of _load_end. If relocation is not
required, it is unnecessary to calculate the address of _load_end.
This can reduce the operation time of two instructions.
Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
cpu_offset and cpu_intc_offset must be int to detect failed invocations of
fdt_node_offset_by_phandle() or fdt_parent_offset().
After determining cpu_offset we have to check this value and not
cpu_intc_offset.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
cpu_offset, cpu_intc_offset must be int to discover failed invocations of
fdt_node_offset_by_phandle() or fdt_parent_offset().
After determining cpu_offset we have to check this value and not
cpu_intc_offset.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
When order is equal to __riscv_xlen, the shift operation will not perform
any operation, which will cause reg->base & (BIT(reg->order) - 1) to always
be 0, and the condition has not been established.
This patch fixes this bug.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If the path where this repo is located contains the platform name on
it, the original Makefile replaced its occurrences from the path making
it an invalid path. This commit prevents this behavior replacing only
the last part of the path as intended.
Signed-off-by: Alejandro Cabrera Aldaya <aldaya@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
I don't know why but `echo -n` didn't work for me. macOS supports
the `-n` option but it doesn't work in the makefile. What it does
instead is it literally writes `-n` to the file and then also
leaves a newline at the end.
I'm using GNU Make 4.4 (`gmake` from Homebrew).
Signed-off-by: KaDiWa <kalle.wachsmuth@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Corrected the same parameter of writel_relaxed in sun20i_d1_riscv_cfg_init
to be u32 for a while and u64 for a while.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Split up sbi_ecall_replace so that each extension is in its individual
file.
Also reorganize the corresponding section in lib/sbi/objects.mk so
that it is grouped by extension, now that the object file targets are
split up.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We fix the following semihosting compile error observed using LLVM:
lib/utils/serial/semihosting.c:158:12: error: result of comparison of constant -1 with expression of type 'char' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
ret = ch > -1 ? ch : -1;
~~ ^ ~~
Fixes: 7f09fba86e ("lib: utils/serial: add semihosting support")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
uart->reg_offset and uart->reg_io_width are only used on uart8250 and
not required on other platforms. Remove for sifive and gaisler.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For each SBI extension, we:
- Add a Kconfig option for it
- Add the extension to sbi_ecall_exts only if the extension is enabled
- Add the corresponding sbi_ecall_* object file only if the extension is
enabled
Special cases are as follows:
- The legacy extensions are lumped together as one 'big' extension, as
has always been the case in OpenSBI code.
- The platform-defined vendor extensions are regarded as one extension.
- The Base extension cannot be disabled.
- sbi_ecall_replace implements multiple extensions, so it's not easy to
avoid linking it in. Enable it always, and use #ifdef to
disable/enable individual extensions.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Instead of hard-coding the list of extensions in C code, use carray to
generate the list of extensions.
Using carray makes adding and removing extensions slightly cleaner. This
also paves the way for using Kconfig to disable unneeded extensions.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add back the missing rules needed to build carray files in lib/sbi. This
allows future usage of carray in lib/sbi.
Fixes: de80e9337d ("Makefile: Compile lib/utils sources separately for each platform")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since
commit 9c07c513aa ("firmware:Remove FW_PAYLOAD_FDT_PATH compile-time option"),
the section where FDT would be embedded in has changed from *.text* to *.rodata*,
but some places in fw_payload.md and fw.md are still *.text*.
This patch updates the document.
Signed-off-by: Yangjie Zhang <pyjmstr@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add cscope support so that running `make cscope` will generate/update
cscope files used for source code browsing, while running `make
distclean` will remove the cscope files.
Also add entry in .gitignore to ignore generated cscope files.
Signed-off-by: Tan En De <ende.tan@linux.starfivetech.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
We update ae350 documentation to add details about platform device tree.
The nodes and their properties must be provided to properly initialize
data of underlying hardware and access their mmio registers.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add domains_init platform hook for Andes AE350, users can add domain
description in device tree and select FDT domain support in Kconfig
to achieve system-level partitioning.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Move Andes PLICSW ipi device to fdt ipi framework, this patch is based
on Leo's modified IPI scheme on PLICSW.
Current IPI scheme uses bit 0 of pending reigster on PLICSW to send IPI
from hart 0 to hart 7, but bit 0 needs to be hardwired to 0 according
to spec. After some investigation, self-IPI seems to be seldom or never
used, so we re-order the IPI scheme to support 8 core platforms.
dts example (Quad-core AX45MP):
plicsw: interrupt-controller@e6400000 {
compatible = "andestech,plicsw";
reg = <0x00000000 0xe6400000 0x00000000 0x00400000>;
interrupts-extended = <&CPU0_intc 3
&CPU1_intc 3
&CPU2_intc 3
&CPU3_intc 3>;
interrupt-controller;
#address-cells = <2>;
#interrupt-cells = <2>;
};
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch adds fw_platform_init() to initialize ae350 platform.name
and platform.hart_count by parsing device tree.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Andes PLIC is compatible with plic driver. The PLIC base address and
number of source can be obtained by parsing the device tree.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The boot-time cache operations have been handled by U-boot SPL, so we
can drop duplicate code.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch generalizes the logic to add a memory range with desired
alignment and flags of consecutive regions to the root domain.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
With the T-HEAD C9XX cores being designed before or during ratification
of the SSCOFPMF extension, they implement a PMU extension that behaves
very similar but not equal to it by providing overflow interrupts though
in a slightly different registers format.
The sun20i-d1 is using this core. So implement the necessary overrides
to allow its pmu to be used via the standard sbi-pmu extension.
For now it's also the only soc using this core, so keep the additional
code in the d1-space for now.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Init of non-standard extensions is a platform-specific thing,
so allow generic platforms to do this via a platform-override.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The platform-specific extension_init callback is supposed to
set specific things for the platform opensbi is running on.
So it's also the right place to override specific hart_features
if needed - when it's know that autodetection has provided
wrong results for example.
Suggested-by: Atish Patra <atishp@atishpatra.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Platforms may need to override auto-detected hart features
in their override functions. So move the hart_features
struct to the sbi_hart.h header allowing us to pass it over
to platform-handlers.
Suggested-by: Atish Patra <atishp@atishpatra.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Don't spread checking for pmu extensions through the code
but instead introduce a sbi-pmu function that other code can
call to get the correct information about the existence of the
pmu interrupt.
Add a sbi_pmu_device override function to allow overridung this
bit as well if needed.
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch does following fixes in fdt_pmu_setup():
1) If any of the event mapping DT property is absent or too small
then don't skip parsing of other DT properties.
2) Return failure if sbi_pmu_add_hw_event_counter_map() fails.
3) Return failure if sbi_pmu_add_raw_event_counter_map() fails.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
If a particular misaligned load or store cannot be emulated at all, for
the redirected trap, trap.gva is set to 0, but it should be the same as
mstatus[h].GVA of the original trap. Fix this so that if the trap is
destined for HS-mode, hstatus.GVA is then set correctly.
Fixes: 1c4ce74f51 ("lib: sbi: Set gva when creating sbi_trap_info")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The GVA bit is in mstatus on RV64, and in mstatush in RV32. Refactor
code handling this in sbi_trap_handler into a helper function to extract
GVA from sbi_trap_regs, so that future code accessing GVA can be
XLEN-agnostic.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Extend example for Unmatched board to provide SBI PMU bindings
for generalized and cache event's where they are applicable.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
bitmap for MHPMCOUNTERx should be 0x18 and not 0x0c, we check
against SBI_PMU_FIXED_CTR_MASK which assumes than first 3 bits are
dedicated to mcycle, mtime and minstret, u74 has 2 hardware counters.
Reported-by: Zhang Xin <zhangxin.xa@gmail.com>
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_pmu.h should only include minimal required headers whereas
sbi_pmu.c should include all required headers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Let us print the platform PMU device name at the boot-time so that users
know whether the underlying platform has custom per-HART PMU operations.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We extend SBI PMU implementation to allow custom PMU device operations
which a platform can use for platform specific quirks.
The custom PMU device operations added by this patch include:
1) Operations to allow a platform implement custom firmware events.
These custom firmware events can be SBI vendor extension related
events or platform specific per-HART events are not possible to
count through HPM CSRs.
2) Operations to allow a platform implement custom way for enabling
(or disabling) an overflow interrupt (e.g. T-Head C9xx).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Currently, we have 32 elements (i.e. SBI_PMU_FW_EVENT_MAX) array of
"struct sbi_pmu_fw_event" for each of 128 possible HARTs
(i.e. SBI_HARTMASK_MAX_BITS).
To reduce memory usage of OpenSBI, we update FW counter implementation
as follows:
1) Remove SBI_PMU_FW_EVENT_MAX
2) Remove "struct sbi_pmu_fw_event"
3) Create per-HART bitmap of XLEN bits to track FW counters
which are started on each HART
4) Create per-HART uint64_t array to track values of FW
counters on each HART.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
As-per SBI specification, all firmware counters are always 64 bits
wide so let us update the SBI PMU implementation to reflect this fact.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The "read a firmware counter" SBI call should only work for firmware
counters so let us replace sbi_pmu_ctr_read() with sbi_pmu_ctr_fw_read()
which works only on firmware counters.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
sideleg and sedeleg csrs are not part of riscv isa spec
anymore, these csrs were part of N extension which
is removed from the riscv isa specification.
These commits removed all traces of these csrs from
riscv spec (https://github.com/riscv/riscv-isa-manual) -
commit f8d27f805b65 ("Remove or downgrade more references to N extension (#674)")
commit b6cade07034d ("Remove N extension chapter for now")
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In case of missing "FENCE.TSO" instruction implementation,
opensbi can emulate the "FENCE.TSO" with "FENCE RW,RW", but
mepc was not incremented to continue from the next instruction
causing infinite trap.
Fixes: cb8271c8 ("lib: sbi_illegal_insn: Add emulation for fence.tso")
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
The privileged spec specifies that on a trap to HS-mode, hstatus.GVA
should be set to 1 if stval is written with a guest virtual address, and
to 0 otherwise. Implement this by setting hstatus.GVA to trap->gva when
redirecting traps to HS-mode.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The hypervisor CSRs hstatus, htval, htinst should always be set if the
trap is to be taken in HS-mode, regardless of which mode it came from.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In some cases the sbi_trap_info argument passed to sbi_trap_redirect is
created from scratch by filling its fields. Since we previously added a
gva field to struct sbi_trap_info, initialize gva in these cases also.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The machine mode GVA field is available if the hypervisor extension is
implemented, and indicates if mtval is a guest virtual address. Add a
gva field to sbi_trap_info for this, and in __sbi_expected_trap_hext,
save mstatus[h].GVA to it, so that gva indicates if tval is a guest
virtual address. If the hypervisor extension is not implemented, always
set gva to 0.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The machine mode GVA field is in mstatus for RV64 and mstatush for RV32,
and is available if the hypervisor extension is available. If an
exception occurs, we may need to redirect the trap to HS-mode, in which
case, hstatus.GVA should be set to same as the machine mode GVA bit.
Add MSTATUS_GVA for RV64, MSTATUSH_GVA for RV32, and their SHIFT
encodings. The SHIFT index is helpful in assembly code, since field
extraction can be implemented in only one register. In pseudocode:
- For RV32: gva = (mstatus >> MSTATUS_GVA_SHIFT) & 1;
- For RV64: gva = (mstatush >> MSTATUSH_GVA_SHIFT) & 1;
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We update all documentation files to:
1) Remove references to platform specific config.mk file since it is
has been removed.
2) Add details about platform specific configs/defconfig and Kconfig
files mandatory for each platform.
3) Add required packages in top-level README.md
4) Fix typo releated to object.mk in docs/platform/platform.md
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update generic platform to use kconfig for enabling/disabling
platform overrides. We also enable all platform overrides in generic
platform defconfig.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update gpio drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate gpio
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update i2c drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate i2c
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update irqchip drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate irqchip
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update ipi drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate ipi
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update timer drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate timer
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update system drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate system
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update reset drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate reset
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update serial drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate serial
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Currently, if same build directory is used to compile two different
platforms then lib/utils objects are shared for these platforms.
We will be having platform specific configs to enable/disable drivers
in lib/utils and select compile time options for lib/utils sources.
This means lib/utils sources will now be compiled in a platform
specific way.
To tackle above, we update top-level Makefile as follows:
1) Don't create libsbiutils.a anymore because this can't be shared
between platforms.
2) Compile lib/utils sources separately for each platform.
3) Add comments showing which make rules are for lib/sbi, lib/utils,
firmware, and platform sources.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We extend the top-level makefile to allow kconfig based configuration
for each platform where each platform has it's own set of configs with
"defconfig" being the default config.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We adopt Kconfiglib v14.1.0 sources under scripts directory so that
top-level OpenSBI makefile can directly use Kconfiglib scripts without
expecting users to install a particular version of Kconfiglib on their
build system.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Read long long arguments directly using va_arg. Remove original hack for
RV32 that read a long long arg as two long args.
This un-breaks the case on RV64 where e.g. the long long is followed by
an odd number of ints:
sbi_printf("%d %lld", (int) 1, (long long) 2LL);
Also remove the acnt variable, which is now unused.
Signed-off-by: dramforever <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
RISC-V doesn't generate exceptions on divide-by-zero, but the result,
all bits set, is not likely what people expect either. In all cases
where we divide by baudrate there's a chance it's zero (when the DT
it came from is "bad"). To avoid difficult to debug situations, leave
baudrate dependent registers alone when baudrate is zero, as, also in
all cases, it appears we can skip initialization of those registers
and still [hopefully] have a functioning UART.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
While it doesn't look like there are any current cases of using
uninitialized data, let's zero all the UART data members to be
safe. Zero may not actually be better than a random number in
some cases, so all structure members should still be validated
before use, but at least zero is usually easier to debug than
some random stack garbage...
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Factor out the common code used by the fdt UART node parsers,
allowing us to drop duplicate code.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
fw_event_map represents array of firmware events. It should initialized
for maximum number of firmware events not counters.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The active_events array is accessed with counter ID passed from the supervisor
software before the counter ID bound check. This may cause a buffer overrun
if a supervisor passes an invalid counter ID.
Fix this by moving the access part after the bound check.
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, there is no sanity check for firmware event code. We don't see
any issue as Linux kernel driver does a bound check on firmware events
already. However, OpenSBI can't assume sane supervisor mode software
always. Thus, an invalid event idx can cause a buffer overflow error.
For hardware events, the match will fail for invalid event code anyways.
However, a search is unecessary if event code is invalid.
Add a event ID validation function to solve the issue.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The current implementation computes the possible counter range
by doing a left shift of counter base. However, this may overflow depending
on the counter base value. In case of overflow, the highest counter id
may be computed incorrectly. As per the SBI specification, the respective
function should return an error if any of the counter is not valid.
Fix the counter index check by avoiding left shifting while doing the
sanity checks. Without the shift, the implementation just iterates
over the counter mask and computes the correct counter index by adding
the base to it.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
printc would happily write to 'out' even when 'out_len' was zero,
potentially overflowing buffers. Rework printc to not do that and
also ensure the null byte is written at the last position when
necessary, as stated in the snprintf man page. Also, panic if
sprintf or snprintf are called with NULL output strings (except
the special case of snprintf having a NULL output string and
a zero output size, allowing it to be used to get the number of
characters that would have been written). Finally, rename a
goto label which clashed with 'out'.
Fixes: 9e8ff05cb6 ("Initial commit.")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The age old version of Shakti UART was upgraded long back, but we missed
updating the driver in OpenSBI. The old version of UART is not supported
anymore, hence removed the inline comment which is also outdated now.
Signed-off-by: Prasanna T <ptprasanna@gmail.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
MPV bit is set when the value of next_virt boolean variable equals
true. Since the value of next_virt is either 0 or 1, we can set
MPV bit without if-else logic.
Signed-off-by: Che-Chia Chang <alvinga@andestech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If the ecall SBI_EXT_HSM_HART_START is called it might try to wake the
secondary hart using sbi_ipi_raw_send() to send an IPI to the hart.
This can fail if there is no IPI device but no error is returned from
sbi_ipi_raw_send() so the ecall returns as if the action completed and
the caller continues without noticing (in the case of Linux it just hangs
waiting for the secondary hart to become active)
Fix this by changing sbi_ipi_raw_send() to return and error, and if an
error is returned, then return it via SBI_EXT_HSM_HART_START call.
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Motivation: Suppose a peripheral needs to be configured to transmit
data. There is an SFR bit which indicates that the peripheral is ready
to transmit. The firmware should check the bit and will only transmit
data when the peripheral is ready. When the firmware starts polling the
SFR, the peripheral could be busy transmitting/receiving other data so
the firmware must wait till that completes. Assuming that there is no
other way, the firmware shouldn't wait indefinitely.
The function sbi_timer_waitms_until() will constantly check whether a
certain condition is satisfied, or timeout occurs. It can be used for
the cases when a timeout is required.
Signed-off-by: Adnan Rahman Chowdhury <adnan.chowdhury@sifive.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
OpenSBI explicitly assumes that there is no pmu hardware counter with
index 1: hardware uses that bit for TM control. So OpenSBI filters
out that index in sanity checks. However OpenSBI also excludes that
counter when reports total amount of hardware counters to Linux. As
a result, Linux uses incomplete counters mask excluding the highest
available counter.
Return accurate number of counters, update the firmware counter
starting index, fix range checks that include num_hw_ctrs.
The simple test is to make sure that there is no counter multiplexing
in the following command:
$ perf stat -e \
r8000000000000000,r8000000000000001,r8000000000000002,r8000000000000003, \
r8000000000000004,r8000000000000005,r8000000000000006,r8000000000000007, \
r8000000000000008,r8000000000000009,r800000000000000a,r800000000000000b, \
r800000000000000c,r800000000000000d,r800000000000000e,r800000000000000f \
ls
Note that 16 firmware events with 16 counters won't require multiplexing.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Now that SBI v1.0 specification is ratified, we change spec verion
implemented by OpenSBI to v1.0.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The allwinner,sun20i-d1-clint compatible string is not documented in any
official binding, so it should not be used by drivers.
The MSWI in the D1 CLINT is compatible with the ACLINT specification, so
it can take advantage of generic driver support. However, that is only
possible if the MSWI and MTIMER are split into separate DT nodes. This
means the final binding for this device is likely to be incompatible
with what is implemented here.
Remove this compatible string from the driver to prevent it from
appearing in a stable version and causing future issues.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
The second invocation of plic_context_init() incorrectly calls the
function with m_cntx_id instead of s_cntx_id. This breaks systems which
only have 1 external interrupt per hart.
Fixes: 8c362e7 ("lib: irqchip/plic: Factor out a context init function")
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
The CLINT in the Allwinner D1 SoC apparently does not support 64-bit
MMIO access. A property was added to support this quirk (and that
property was copied to the ACLINT MTIMER code). However, since this
difference in behavior makes the D1 CLINT incompatible with the SiFive
CLINT's programming interface, a better solution is to use a separate
compatible string.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Based on architecture review committee feedback, the [m|s|vs]seteienum,
[m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clreipnum CSRs are
removed in the latest AIA draft v0.3.0 specification.
(Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)
These CSRs were mostly for software convenience and software can always
use [m|s|vs]iselect and [m|s|vs]ireg CSRs to update the IMSIC interrupt
file bits.
We update the IMSIC programming as-per above to match the latest AIA
draft specification.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We should not change trap->tval to mepc because mtval already points to
the faulting portion of the emulated instruction fetch, which is also
what stval is expected to be.
In addition, htinst is only allowed to be zero for instruction access
faults or page faults, and is only allowed to be zero or a
psuedoinstruction for instruction guest-page faults. Fix trap->tinst for
these cases.
Signed-off-by: dramforever <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If there is an exception while emulating a misaligned load/store, fixup
uptrap.tinst before redirecting. Otherwise, HS-mode software may receive
an htinst describing the lbu/sb instruction that faulted during
emulation[1].
[1]: https://github.com/riscv-software-src/opensbi/issues/258
Signed-off-by: dramforever <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add psuedoinstruction encodings written to mtinst/htinst for faults
caused by implicit memory access for VS-stage address translation
Signed-off-by: dramforever <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Allwinner D1 contains a "PPU" power domain controller which can
automatically power down/up the CPU power domain. This power domain
includes the C906 core along with its CLINT and PLIC.
This HSM implementation supports non-retentive hart suspend by:
1) Saving/restoring state that is lost during hart suspend,
2) Performing cache maintenance before/after hart suspend,
3) Configuring wakeup sources before hart suspend, and
4) Asking the PPU to power down the hart when it enters WFI.
Since this HSM implementation is for a single-core SoC, it does not need
to worry about concurrency or saving multiple instances of state.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
The delegation bit is lost along with the rest of the PLIC state when
the CPU power domain in the Allwinner D1 is powered down, so the PLIC
needs to be re-delegated to S-mode during the hart resume path.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
These functions save/restore the state of the PLIC associated with the
current hart. The context save/restore functions only manipulate a
single context, since most likely the M-mode context is unused and does
not need to be saved.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
These can be used by platform code to save the PLIC priority state, if
it would otherwise be lost during non-retentive suspend. The platform
is responsible for allocating all necessary storage.
As a space optimization, store the saved priority values as 8-bit
integers, since that is large enough to hold any priority value on the
relevant platforms.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
These can be used by platform code to save the PLIC context state, if
it would otherwise be lost during non-retentive suspend. The platform
is responsible for allocating all necessary storage.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
This simplifies both the callers and the callees by removing duplicated
code and consolidating the error handling. It also fixes two bugs in the
process:
1) ie_words was one too large when plic->num_src was a multiple of 32.
2) plic_set_ie takes a 32-bit mask, not a Boolean value, so the FPGA
platforms previously only enabled one out of every 32 interrupts.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
None of the functions modify the passed-in plic_data, so mark it const.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
The suspend code needs to know the resume address for two reasons:
1) Programming some hardware register or management firmware. Here we
assume the hardware/firmware maintains its state between suspends,
so it only needs to be programmed once at startup.
2) When a non-retentive suspend request ends up being retentive, due
to lack of hardware support, pending interrupt, or for some other
reason. However, the behavior here is not platform-dependent, and
this can be handled in the generic hart suspend function.
Since neither situation requires the platform-level suspend function to
know the resume address, stop passing it to that function. Instead,
handle the non-retentive to retentive situation generically.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Non-retentive suspend states may require platform-specific actions
during resume. For example, firmware may need to save and restore the
values of custom CSRs. Add a hook to support this.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Allow the vendor_ext_check and vendor_ext_provider APIs of the
generic platform to be overridden by other platforms
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
HS-mode software can choose what exceptions to delegate to VS-mode using
the hedeleg CSR. Synthetic VS/VU-mode exceptions should also honor
hedeleg. They should be redirected to VS-mode if and only if delegated
by HS-mode.
Signed-off-by: dramforever <dramforever@live.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The device's timer_value callback is already the right prototype to use
for the get_time_val function pointer.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Match data stores hardware attributes which do not change at runtime, so
it does not need to be mutable. Make it const.
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
If the csr's operation comes from M mode, it should not be forwarded
to low-privilege processing, this patch fixes this problem.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The function returns the highest hart-id of the harts actually used in
the system (enabled). Change the name to reflect this fact.
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If an FDT node contains a "status" property and this property is not
"ok" or "okay", this node should be ignored. Introduce a function that
checks this.
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Let us move SiFive platform overrides for FU540 and FU740 into a separate
directory so better maintainability. Other SoC vendors can also create
their own directory under platform/generic.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Instead of having platform override module list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Instead of having FDT gpio driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Instead of having FDT i2c adapter driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Instead of having FDT ipi driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Instead of having FDT irqchip driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Instead of having FDT timer driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Instead of having FDT serial driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Instead of having FDT reset driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Generating C array at compile time based on details provided by
objects.mk is a very useful feature which will help us compile
only a subset of drivers or modules.
We add a bash script (carray.sh) which takes array details and
object/variable list from command-line to generate a C source
containing array of object/variable pointers. We also extend
top-level makefile to use carray.sh whenever specified through
objects.mk.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The generated C source could be anywhere within build directory so
let us update the make rule to comple generated C source accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add platform specific extensions_init() callback which allows
platforms to populate HART extensions for each HART. For example,
the generic platform can populate HART extensions from HART ISA
string described in DeviceTree.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add sbi_hart_update_extension() function which allow platforms
to enable/disable hart extensions.
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Currently, the hart_detect_features() is called everytime a hart
is stopped and started again which is unnecessary work.
We update hart_detect_features() to detect hart features only
once for each hart.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Since past few years, we have been using "hart features" in OpenSBI
to represent all optionalities and multi-letter extensions defined
by the RISC-V specifications.
The RISC-V profiles specification has taken a different approach and
started assigning extension names for all optionalities which did not
have any extension name previously.
(Refer, https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc)
Inspired from the RISC-V profiles specification, we convert OpenSBI
hart features into hart extensions. Going forward, we align the
extension naming with RISC-V profiles specification. Currently, only
"time CSR" and "AIA CSR" have not been assigned extension name but
for everything else we have a name.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The AIA feature detection uses unnecessary goto which is not need
and AIA case in sbi_hart_feature_id2string() does not break. This
patch fixes both issues in AIA feature detection.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
If a hart implements privileged spec v1.12 (or higher) then we can
safely assume that menvcfg CSR is present and we don't need MENVCFG
as a hart feature.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
If a hart implements privileged spec v1.11 (or higher) then we can
safely assume that mcountinhibit CSR is present and we don't need
MCOUNTINHIBT as a hart feature.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
If a hart implements privileged spec v1.10 (or higher) then we can
safely assume that [m|s]counteren CSR are present and we don't need
MCOUNTEREN and SCOUNTEREN as hart features.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The ISA string printed at boot time is not the complete ISA string
representing all single letter and multi-letter extensions rather
it is base ISA string derived from misa CSR so let us update the
boot print accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Both 's' and 'u' are not treated as ISA extensions since these are
privilege modes so let's remove it from misa_string() output.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
It is possible to guess privileged spec versions based on the CSRs
that where introduced in different privileged spec versions. In
future, if we are not able guess privileged spec version then we
can have platform provide it.
We add privileged spec version as per-hart feature and try to guess
it based on presence of mcounteren, mcountinhibit, and menvcfg CSRs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
MHPMEVENT3H-31H are defined in sscofpmf extension. Thus, they should be
accessed only if sscofpmf is present.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The mhpmevent3h to mhpmevent31h CSRs are available on RV32 only when
Sscofpmf extension is available so mstatus_init() should set this
CSRs only when Sscofpmf extension is available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Recently, Sstc extension was ratified. It defines stimecmp which allows
the supervisor mode to directly update the timecmp value without the
need of the SBI call. The hardware also can inject the S-mode timer
interrupt direclty to the supervisor without going through the M-mode.
To maintain backward compatibility with the older software, SBI call
now uses stimecmp directly if the hardware supports.
Implement the Sstc extension.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The current DT binding description is misleading and confusing. Clarify
the text and provide more examples.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The OpenSBI hart init function hart_detect_features() try to read
important CSRs but reasign the last read value to the variable that
initially contains write probe value. So for series of CSRs (like
PMPADDRx) the second CSR probe value will became the initial value of
first probing CSR. To avoid of this issue the CSR read value should be
saved in different variable. In this configuration the count of PMP
will detect rightly if any PMPADDR is hardwired to zero.
Signed-off-by: Dmitry Dunaev <dunaich@mail.ru>
Signed-off-by: Anup Patel <anup@brainfault.org>
Accordind to the RISC-V privileged specification, the VS filed is
mstatus[10:9] instead of mstatus[24:23]. Modify the MSTATUS_VS
to the correct value.
Reported-by: I-Cheng Cheng <i-cheng.cheng@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
reg-offset property is used for offset to apply to the mapbase
from the start of the registers in 8250 UART. In Linux kernel,
it has been handled in 8250 UART driver.
dt-bindings:
<linux>/Documentation/devicetree/bindings/serial/8250.yaml
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When mstateen registers are implemented, the AIA related
configurations need to be done in mstateen for the IMSIC
initialization to succeed.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Extend HART feature detection to discover Smstateen CSRs at boot-time
and configure mstateen envcfg bit depending on availability of
menvcfg CSR.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Smstateen extension provides a mechanism to plug potential
covert channels which are opened by extensions that add to
processor state that may not get context-switched.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The menvcfg.PBMTE bit is read-only zero when Svpbmt extension is not
available so we try to enable menvcfg.PBMTE bit irrespective whether
Svpbmt is available or not.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The bits to configure/enable Zicbo[m|z] extensions in the menvcfg
CSR are WARL. We try to enable these bits irrespective whether
these extensions are available or not because writes to these
bits will be ignored if these extensions are not available.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add the menvcfg CSR as a HART feature and detect it at boot time
using traping mechanism.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The latest RISC-V privileged specification introduces xenvcfg CSRs
to enable/disable certain features/extensions for lower privilege
modes. This patch adds defines for these new [m|h|s]envcfg CSRs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Add static detection to prevent the modification of struct fw_dynamic_info
from forgetting the modification of FW_DYNAMIC_INFO_xxx_OFFSET
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add static detection to prevent the modification of struct sbi_scratch
from forgetting the modification of SBI_SCRATCH_xxx_OFFSET
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add static detection to prevent the modification of struct sbi_platform
from forgetting the modification of SBI_PLATFORM_xxx_OFFSET
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
On 128-bit machines, sbi_load_xx/sbi_store_xx needs to be improved.
Through this conditional compile, the corresponding implementation
can be prompted to be added.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
lwu exists under the current rv64 and should also exist under the rv128
in the future, so I modified the conditions of conditional compilation
so that it can adapt to the future situation
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
pmp_set/pmp_get calculates the location of the CSR register separately
through conditional compilation. In the case of non-32-bit and 64-bit,
we can report an error directly through #error without putting it at
runtime
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Initial commit of the xlnx-uartlite device and FDT support. This was
tested by running OpenSBI on a modified QEMU virt machine using the
xlnx-uartlite for serial.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the external interrupt handling is scattered between
sbi_init and sbi_trap. This patch moves all external interrupt
handling into a simple framework called sbi_irqchip.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We should disable APLIC DT nodes in fdt_fixups() which are not
accessible to the next booting stage based on currently assigned
domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple FDT irqchip driver for APLIC so that generic platform (and
other FDT based platforms) can utilize common APLIC initialization library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple APLIC initialization library which is independent of
hardware description format (FDT or ACPI). This APLIC initialization
library can be used by custom OpenSBI platform support to setup
APLIC domains.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We should disable IMSIC DT nodes in fdt_fixups() which are not
accessible to the next booting stage based on currently assigned
domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple FDT irqchip driver for IMSIC so that generic platform
(and other FDT based platforms) can utilize common IMIC library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple IMSIC library which is independent of hardware description
format (FDT or ACPI). This IMSIC library can be used by custom OpenSBI
platform support to setup IMSIC for external interrupts.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We can have IPIs based on external interrupts provided by devices
such as AIA IMSIC so we should enable mie.MEIE bit at appropriate
places in generic library.
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We introduce nascent_init() platform callback which will allow
platforms to do very early initialization of platform specific
per-HART CSRs and per-HART devices.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We can have multiple FDT irqchip drivers to be probed when a RISC-V
system has different types of interrupt controller in a hierarchy.
This will be certainly the case when a RISC-V system has both
RISC-V AIA IMSIC and RISC-V AIA APLIC implemented.
We extend simple FDT irqchip framework to allow multiple FDT
irqchip drivers to be used for same RISC-V platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
This patch adds sbi_trap_set_external_irqfn() API which can be used by
OpenSBI platform code to set a callback function for external interrupts.
The RISC-V AIA IMSIC driver will use this API to implement inter-processor
interrupts on-top-of MSIs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The RISC-V AIA specification improves handling of per-HART local
interrupts in a backward compatible manner. This patch adds defines
for the new RISC-V AIA CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Previously, it was rounded down and that gives suboptimal results when
non-standard clock sources or baud rates are used.
Signed-off-by: Jakub Luzny <jakub.luzny@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In a systems that provide strings.h and it is included
together with sbi_bitops.h the compilation error appears.
The ffs() and fls() are provided by strings.h
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
From version 2.38, binutils default to ISA spec version 20191213. This
means that the csr read/write (csrr*/csrw*) instructions and fence.i
instruction has separated from the `I` extension, become two standalone
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
this causes the following build failure:
CC lib/sbi/sbi_tlb.o
<<BUILDDIR>>/lib/sbi/sbi_tlb.c: Assembler messages:
<<BUILDDIR>>/lib/sbi/sbi_tlb.c:190: Error: unrecognized opcode `fence.i'
make: *** [Makefile:431: <<BUILDDIR>>/build/lib/sbi/sbi_tlb.o] Error 1
The fix is to specify those extensions explicitly in -march. However as
older binutils version do not support this, we first need to detect
that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the mhpmevent CSRs are untouched during hart init during
cold/warm boot. Ideally, we should clear out all the bits except
overflow and MINH bit. That is required to disable overflow
interrupt and inhibit counting in M-mode to avoid any spurious
interrupts before perf start.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
PMU overflow interrupt should be disabled durinig initial configuration of
counters. They should be enabled while starting counters.
Fixes: 730f01bb41 ("lib: sbi: Support sscofpmf extension in OpenSBI")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The counter mapping in DT may be incorrect if all the counters specified
in the mapping are actually not physically present in the hardware.
OpenSBI should only keep a mapping of counters enabled in hardware and
defined in DT. This assume that all the programmable hpmcounters are
consecutive as it doesn't make sense to build a system with sparse
hpmcounters.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Using "void *" in arithmetic causes errors with strict compiler settings:
"error: pointer of type 'void *' used in arithmetic [-Werror=pointer-arith]"
Avoid these by calculating on "char *" where 1-byte data size is assumed.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When the watchdog is running the HiFive Unmatched board does not reboot
properly and shuts down itself a few seconds after reboot, in the early
stages of the u-boot loading. On a Linux kernel this happens when the
da9063_wdt module is loaded. This does not happen if the module is
unloaded before reboot or if the watchdog module is loaded with
"stop_on_reboot=1".
Fix that by stopping the watchdog before attempting to reset the board.
This is done by zeroing the TWDSCALE field of CONTROL_D register, unless
it was already set to 0.
Reported-by: Tianon Gravi <tianon@debian.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Nikita Shubin <n.shubin@yadro.com>
Tested-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
da9063_reset() and da9063_shutdown() take the chip address in argument
(like similar functions), but in practice use the da9063 global struct
instead. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Some of RISC-V emulators provide HTIF at fixed base address so for
such emulators users have to hard-code HTIF base address in the
linker script.
To address this problem, we let users optionally provide fixed HTIF
base address via platform support (or device tree).
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Currently, the ACLINT MSWI size check is forcing size to be at least
0x4000. This is inappropriate check because most systems will never
utilize full 16KB for a single ACLINT MSWI device so instead we should
check that ACLINT MSWI size is enough for on the associated HARTs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Some of the external firmwares using OpenSBI as library are facing
issues with the weak memcpy() and memset() aliases in libsbi.a so
we move these to fw_base.S. This way mapping of implicit memcpy()
or memset() calls to sbi_memcpy() or sbi_memset() will only be done
for OpenSBI firmwares.
(Refer, https://github.com/riscv-software-src/opensbi/issues/234)
In addition, we also add memmove() and memcmp() mappings in fw_base.S
because as-per the GCC documentation the freestanding environment must
provide memcpy(), memmove(), memset(), and memcmp().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The commit 69d7e53 disables the -m(no-)save-restore option for
clang, but clang11 supports this option. This patch uses the
output information of the compiler to check whether the compiler
supports this option.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When compiling with -Os option along with -ffreestanding, both GCC
and clang will add implicit calls to memcpy() and memset() for stack
variables initialized in declaration.
The C standard as per Clause 4, the compiler cannot necessarily
assume that anything beyond:
* float.h
* iso646.h
* limits.h
* stdalign.h
* stdarg.h
* stdbool.h
* stddef.h
* stdint.h
* stdnoreturn.h
* fenv.h
* math.h
* and the numeric conversion functions of stdlib.h.
This patch maps memcpy() and memset() as weak-alias of sbi_memcpy()
and sbi_memset() respectively so that implicit calls to memcpy()
and memset() will compile properly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
The riscv target of CLANG-10 (or lower) does not support the
-m(no-)save-restore option so we get compile warnings. This patch
fixes compile warning by using -m(no-)save-restore option only
for GCC.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
We should check if SSCOF extension is present,
before applying inhibit mask and clearing overflow,
otherwise undesirable value can be written
in MHPMEVENT_N CSR.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
This commit makes Spike usable as QEMU (in fact, those are based on
QEMU examples).
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
RISC-V privilege specification does not specify how to encode the event ID.
Therefore, each platform is allowed to customize its own encoding rule.
The common encoding methods are as follow, directly assigning a number to an
event, or every bit in the mphmevent CSR controls one specified event or
mixes the above two methods.
To enable OpenSBI to support the above three encoding methods simultaneously,
this patch repurpose the dt property "riscv,raw-event-to-mhpmcounters". The
"riscv,raw-event-to-mhpmcounters" will describes the one or multiple raw
events that could be counted by a set of counters. But, the column number
of "riscv,raw-event-to-mhpmcounters" is extended from 2 to 3. The 1st column
(64bit) is the ID of the raw events. The 2nd column (64bit) represents a
select_mask now to represent the bits used for event ID encoding.
If a platform directly encodes each raw PMU event as a unique ID,
the value of select_mask will be 0xffffffff_ffffffff.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Atish Patra<atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
BUG and BUG_ON are not informative and are rather lazy interfaces, only
telling the user that something went wrong in a given function, but not
what, requiring the user to find the sources corresponding to their
firmware (which may not be available) and figure out how that BUG(_ON)
was hit. Even SBI_ASSERT in its current form, which does include the
condition that triggered it in the output, isn't necessarily very
informative. In some cases, the error may be fixable by the user, but
they need to know the problem in order to have any hope of fixing it.
It's also a nuisance for developers, whose development trees may have
changed significantly since the release in question being used, and so
line numbers can make it harder for them to understand which error case
a user has hit.
This patch introduces a new sbi_panic function which is printf-like,
allowing detailed error messages to be printed to the console. BUG and
BUG_ON are removed, since the former is just a worse form of sbi_panic
and the latter is a worse version of SBI_ASSERT. Finally, SBI_ASSERT is
augmented to take a set of arguments to pass to sbi_panic on failure,
used like so (sbi_boot_print_hart's current error case, which currently
manually calls sbi_printf and sbi_hart_hang):
SBI_ASSERT(xlen >= 1, ("Error %d getting MISA XLEN\n", xlen));
The existing users of BUG are replaced with calls to sbi_panic along
with informative error messages. BUG_ON and SBI_ASSERT were unused (and,
in the case of SBI_ASSERT, remain unused).
Many existing users of sbi_hart_hang should be converted to use either
sbi_panic or SBI_ASSERT after this commit.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
A recent commit (b28f0700) turns to read from CSR_MCOUNTINHIBIT after
checking the SBI_HART_HAS_MCOUNTINHIBIT HART feature, which leaves the
mctr_inhbt uninitialized in pmu_ctr_find_hw().
As a result, compiler will complain:
error: 'mctr_inhbt' may be used uninitialized in this function.
This commit resolves the issue by assigning an initial value to mctr_inhbt.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Add support for the UART provided by the LiteX SoC
framework (https://github.com/enjoy-digital/litex),
based on its FDT info (described in the Linux tree at
Documentation/devicetree/bindings/serial/litex,liteuart.yaml).
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We should clear A bits in prot variable before enabling A_NA4 or A_NAPOT.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
da9063 PMIC can be used to reset/shutdown the
Sifive Unmatched board.
shutdown is done simply by writing SHUTDOWN bit to
DA9063_REG_CONTROL_F register.
reset via setting WAKEUP bit in DA9063_REG_CONTROL_F
register followed by masking POWER and POWER1 domains
and setting STANDBY bit in DA9063_REG_CONTROL_A,
originally discovered by Alexandre Ghiti on linux-riscv
maillists.
Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
We should ensure that pmpcfg0.pmp0cfg is set to zero before using
pmpaddr0 CSR for detecting implemented PMP address bits.
Fixes: bf21632860 ("lib: sbi: Detect PMP granularity and number
of address bits")
Signed-off-by: Vasan VS <vasan.vs@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
As per the DT schema rules, the prefix should be vendor. As the PMU
properties are generic for all vendors, change the prefix to riscv
instead of pmu.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Some platforms such as hifive unmatched doesn't implement mcountinhibit
csr. However, it has hardware events that can be monitored using 2
hpmcounter it has (i.e. mhpmcounter3 & mhpmcounter4).
Currently, PMU extension disabled if mcountinhibit is absent. That's not
really necessary as long as the supervisor OS keeps track of the delta
value of the counters. Without mcountinhibit, the delta value won't be
entirely accurate because the counters are freely running. However, that
should be fine to produce an approximate counter value which can help
performance analysis. Perf sampling won't work though as sscof extension
is not present in hifive unmatched.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The mhpm bits represent the number of bits available in mhpmcounter
while counter width describes a zero indexed value. Fix the counter width
calculation.
Fixes: 13d40f21d5 ("lib: sbi: Add PMU support")
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The hardware solely relies on the event selector value in mhpmevent
to figure out what event to monitor using that counter. It should be
reset when counter reset happens.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
A platform may use programmable counters for cycle/instret events.
The priv spec allows that provided that cycle/instret also report those
events in addition to the programmable counters. We should allow that
functionality in OpenSBI.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
OpenSBI doesn't use any counters for its own usage. Thus, all the counters
can be made accessible for lower privilege mode always. However, the
mcountinhibit must be set so that the counter doesn't increment.
As a result, we don't have to enable/disable mcounteren at every start/stop.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
This patch adds sscofpmf extension in pmu module which includes
following things.
1. Enable overflow irq when starting a counter.
2. Setting the correct event filters passed from supervisor.
3. Delegating the overflow interrupt to the supervisor.
4. Add RV32 support for sscofpmf.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Sscofpmf ISA extension introduces PMU counter overflow and filtering support.
It introduces a read only `scountovf` csr that can be used to detect if
a hart supports this extension at runtime. However, this feature is only
useful if the hart already supports mcounteren and mcountinhibit.
Add a dynamic detection mechanism and boot time print message if sscofpmf
is present.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The Sscofpmf extension introduces mhpmevent[h] csrs to handle filtering
/overflow bits in RV32. There is no way to read/write mcountinhibit
using mcountinhibit csr using a variable.
Updated the support to read/write mhpmevent[h] and mcountinhibit csr.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The initialization of a reset driver may fail for various reasons, like
a PMIC based reset driver not finding the required I2C driver. The return
code of the init routine may take other error values than -ENODEV.
If the initialization of a reset driver fails, this should not lead to the
board hanging. It is enough that the reset driver does not call
sbi_system_reset_add_device() to avoid invoking the driver for a device
that could not be initialized.
Change the return type of fdt_reset_init() to void.
Print a message if an error occurs.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Move the fdt_reset_init() invocation from generic_early_init() to
generic_final_init(). This allows to print error messages.
Ignore the return value of fdt_reset_init() as we should not stop booting
due to failure to initialize reset drivers.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Moving the sbi_boot_print_general() call after the
sbi_platform_final_init() call allows to print devices initialized in the
latter.
To keep the overall print sequence the same also move
sbi_boot_print_domains().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Convert static array to sbi_list.
This removes size limitation, makes add/remove more efficient and
saves space.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The parameter passed to HFENCE.GVMA instruction in rs1 register
is guest physical address right shifted by 2 (i.e. divided by 4).
Unfortunately, we overlooked the semantics of rs1 registers for
HFENCE.GVMA instruction and never right shifted guest physical
address by 2. This issue did not manifest for hypervisors till
now because all H-extension implementations (such as QEMU, Spike,
Rocket Core FPGA, etc) we tried till now were conservatively
flushing everything upon any HFENCE.GVMA instruction.
This patch fixes GPA passed to __sbi_hfence_gvma_vmid_gpa()
and __sbi_hfence_gvma_gpa() functions.
Fixes: 331ff6a162 ("lib: Support stage1 and stage2 tlb flushing")
Reported-by: Ian Huang <ihuang@ventanamicro.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
This simply adds an helper to get fdt address which is more explicit than
sbi_scratch_thishart_arg1_ptr.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Although we have PRILX to help us print unsigned long without
considering the 32bit/64bit differences, there are still some
places using 08lx and 016lx manually --- leading to redundant code.
This commit fixes the issue by using PRILX all the time.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Now that sbi_system support multiple system reset devices, we should
register separate devices for GPIO restart and GPIO poweroff because
DT describes these as separate devices with different compatible
strings.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
The T-HEAD PLIC implementation requires setting a delegation bit
to allow access from S-mode. Now that the T-HEAD PLIC has its own
compatible string, set this bit automatically from the PLIC driver,
instead of reaching into the PLIC's MMIO space from another driver.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When we are doing opensbi development, we want to know the build time
and compiler info for debug purpose.
To enable this message, please add "BUILD_INFO=y", like:
```
make BUILD_INFO=y
```
NOTE: Using `BUILD_INFO=y` without specifying SOURCE_DATE_EPOCH will
violate "reproducible builds". So it's ONLY for development and debug
purpose, and should NOT be used in a product which follows "reproducible
builds".
Signed-off-by: Wei Fu <wefu@redhat.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The SBI specification requires that sbi_system_reset() returns
SBI_ERR_INVALID_PARAM if reset_type or reset_reason are not valid.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Instead of saving context only for default non-retentive suspend,
we should save context for all non-retentive suspend types.
Fixes: 74756891cc ("lib: sbi: Implement SBI HSM suspend function")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Let's make system_reset_check returning priority instead of only
true/false. In that case 0 - means not supported, and anything above
means priority that makes existing reset handlers being used in first
place, unless it is decided to lower their priority.
The handler with the most priority wins.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
To support different handlers for different types of resets, we are
adding a sbi_list of restart handlers.
Instead of sbi_system_reset_set_device we use
sbi_system_reset_add_device to reflect the actual meaning.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The GPIO reset driver supports reset and poweroff. But not all boards
support both. gpio_system_reset_check() must detect this situation.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We should use sbi_timer_mdelay() instead of custom gpio_mdelay() in
the gpio reset driver.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We now have frequency of the timer device provided by the platform
support so we can emulate desired delay using a loop where the number
loop iterations are based on timer frequency.
This patch provides sbi_timer_delay_loop() for above purpose.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We now have frequency in timer device instance provided by platform
so let's print timer frequency as part of the boot prints.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Generic mdelay() and udelay() functions can be provided by the
sbi_timer framework if timer frequency is available in the timer
instance provided by the platform support or timer driver.
This patch adds timer frequency (timer_freq) member in the
struct sbi_timer_device for above purpose.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add fdt_parse_timebase_frequency() function which can be used
by ACLINT mtimer driver and platform code to get timebase frequency.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We use BUG() macro in csr_read_num(), csr_write_num(), and
misa_string() functions for unhandled cases.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Three macros are added. One is called BUG, which is used to put in an
unreachable branch. One is called BUG_ON, which is used to check bugs
and assert conditions are opposite. One is called SBI_ASSERT, used for
assertion checking.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The original version of ctz will cause an endless loop, if the parameter
passed in is 0. This commit fixes this bug.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
One of the watchdogs in the D1 SoC provides a "soft reset" function,
which allows software to immediately reset the entire SoC. Add a driver
so it can implement the SBI system reset function.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
In preparation for adding a new fdt_reset driver, ensure the existing
lists are sorted alphabetically.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
sbi_platform_get_features_str() uses sbi_snprintf() to construct the
features_str. However, it passes the wrong length value (i.e., the nfstr),
which should be (nfstr-offset) as the starting point of str (i.e.,
features_str + offset) changes.
This commit also checks the return value of snprintf, and handles the
corner case that the string buffer is full.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
As other exported fifo functions, we should check whether the fifo is
valid in sbi_fifo_is_empty and sbi_fifo_is_full. To this end, this patch
changes the retval from bool to int, and the two functions will return
SBI_EINVAL in the case the fifo is invalid.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Avoid getting messages from multiple harts (using dprintf and printf)
concurrently with a spinlock serializaing calls to sbi_dprintf(),
sbi_printf() and sbi_puts()
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
It can be useful to make SBI v0.2 or newer ecalls from this payload
for testing purposes. To support this, convert the macros to use the
extension/function parameter convention.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
commit 764a17d852 ("lib: sbi: Implement firmware counters") added
switch cases for CAUSE_LOAD_ACCESS and CAUSE_STORE_ACCESS. This caused
them to stop being redirected to U or S mode, as that is handled in the
default switch case. As a result, an error in userspace could cause the
system to hang. Fix this by allowing the acces fault case to fall
through to the default case.
Fixes: 764a17d852 ("lib: sbi: Implement firmware counters")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
In sbi_ecall_rfence_handler, it will compare the funcid with
REMOTE_HFENCE_GVMA and REMOTE_HFENCE_VVMA_ASID. Later it check
whether the misa includes H-extension. This checking is incomplete
which misses REMOTE_HFENCE_GVMA_VMID and REMOTE_HFENCE_VVMA.
Fix the issue by updating the checking range.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We simplify MTIMER synchronization as follows:
1) Detect MTIMER devices with unique (or non-shared) MTIME
register at boot-time
2) Select first MTIMER device with no associated HART as our
reference MTIMER device
3) Only synchronize MTIMER devices with unique (or non-shared)
MTIME register using reference MTIMER device
4) Directly update the MTIME register at time of synchronization
because MTIME is a read/write register.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have ACLINT MTIMER devices which only support 32-bit MMIO
accesses on RV64 system so this patch adds a boolean DT property
"mtimer,no-64bit-mmio" to detect this from MTIMER DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_parse_aclint_node() is used to parse DT node for SiFive
CLINT, ACLINT MTIMER, and ACLINT MSWI devices.
The ACLINT MTIMER has undergone following changes:
1) MTIMER DT node now requires separate addresses in for MTIME
register and MTIMECMPx registers in the reg DT property.
2) MTIMER DT node might have no interrupts-extended DT property
when the MTIMER device has no associated HARTs (i.e. the
MTIMER device has no MTIMECMPx registers)
This patch extends fdt_parse_aclint_node() to handle above
mentioned changes in ACLINT MTIMER DT bindings.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add "index" parameter to fdt_get_node_addr_size() API so that
calling function can specify index of desired register set. This
will allow fdt_get_node_addr_size() to handle DT nodes with
multiple register sets.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend the ACLINT library to support separate base addresses
for MTIME and MTIMECMP registers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The maximum address and size encoded in DT are 64-bit numbers, so we
should use uint64_t for 'addr' and 'size' in fdt_get_node_addr_size().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The generic GPIO reset driver has two entries in the match table:
"gpio-poweroff", "gpio-reset". Only the first entry is considered by
fdt_reset_init().
Define "gpio-poweroff" and "gpio-reset" as compatibility strings of two
separate reset drivers. They still can share code.
Fixes: e3d6919d10 ("lib: utils/reset: Add generic GPIO reset driver")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The previous code uses _start as the load address, this default .entry is
the first segment, using _fw_start does not need to make this assumption.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When generating code with -mno-relax, GCC puts .option norelax in
the generated assembly, and so doesn’t bother passing on -mno-relax
to the assembler. This has the unfortunate effect that, when using
GCC to assemble hand-written assembly, -mno-relax does nothing,
and we have to pass -Wa,-mno-relax to manually forward it to the
assembler.
This is an old GCC bug that was fixed [1] recently. For the time
being, let's pass "-Wa,-mno-relax" to ASFLAGS for the GCC + LLD
combination to work, e.g.:
$ make CC=riscv64-unknown-elf-gcc LLVM=1 PLATFORM=generic
[1] 3b0a7d624e
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Recent FW_PIC=y changes actually require toolchains with PIE support
and it is on by default. Existing doc uses a GNU bare-metal toolchain
as examples but it does not support PIE.
Replace references of bare-metal toolchain prefix with Linux toolchain
prefix everywhere in documentation.
Also indicate that "riscv64-unknown-freebsd-" as an alternative to
"riscv64-linux-" GNU toolchain.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
FW_PIC=y is on by default, but the doc is missing when this was
introduced. Add some description for it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This updates documentation to describe parameters passed to firmware
from previous booting stage, and corresponding address alignment
requirement.
This also fixes a typo in fw_dynamic.md (it's => its).
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
If the device tree is at an address that is not __SIZEOF_POINTER__
aligned, the fdt relocation code tries to align both source and
destination address to __SIZEOF_POINTER__ before the memory copy.
But such alignment can lead to unexpected results if either source
or destination address is not aligned.
In fact libfdt requires that the device tree must be at an 8-byte
aligned address. Hence remove the unhelpful alignment codes.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The fields are of type unsigned long and are not pointers. While this
happens to be the same for RV32/RV64, it is not correct when compiling
for a CHERI-RISC-V system where pointers are twice the size of long.
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We add generic GPIO reset driver inspired from gpio-restart
and gpio-poweroff drivers of Linux kernel.
Signed-off-by: Green Wan <green.wan@sifive.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add a minimal SiFive GPIO driver so that we can do GPIO based
system power-off and reset.
Signed-off-by: Green Wan <green.wan@sifive.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add a simple FDT based GPIO framework which is built on top
of generic GPIO library. The phandle of FDT GPIO chip DT node
is treated as unique GPIO chip ID required by the generic GPIO
library. The FDT based GPIO chip drivers will be probed on-demand
from fdt_gpio_pin_get() called by the GPIO client drivers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add generic GPIO configuration library which is independent of
hardware description format (FDT or ACPI). The OpenSBI platform
support or GPIO drivers can register GPIO chip instances which
can be discovered and used by different GPIO clients. Each GPIO
chip instance has a unique ID which can be used by GPIO clients
to lookup GPIO chip instance.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The libfdt project does not have a generic API to parse phandle
with args from a DT node so we add fdt_parse_phandle_with_args()
for this purpose. This new API will be useful to FDT based drivers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We only need libgcc for 64-bit division on RV32. Whilst GCC toolchains
bundle libgcc, Clang toolchains tend not to ship libclang_rt.builtins
given every compiler is a cross-compiler for every target and so you
would need a silly number of builds of it, with only the native library
available; only vendor-provided Clang toolchains specifically for bare
metal cross-compiling are likely to provide it.
Thus, import part of FreeBSD's implementation of the division support
functions needed and stop linking against libgcc.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Anup Patel <anup.patel@wdc.com>
This is intended to mirror the Linux kernel. Building with CC=clang will
use Clang as the compiler but default to using the existing binutils.
Building with LLVM=1 will default to using Clang and LLVM binutils.
Whilst GCC will accept the -N linker option and forward it on to the
linker, Clang will not, and so in order to support both compilers we
must use -Wl, to forward it to the linker as is required for most other
linker options.
Note that there is currently a bug when using Clang as the compiler and
riscv64-linux-gnu-ld as the linker for FW_PIC=y. At first glance this
appears to be a bug in GNU binutils, but this could also be Clang or
OpenSBI at fault in some subtle way. Thus, for now, advise that this
combination be avoided.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Anup Patel <anup.patel@wdc.com>
Bare-metal GNU ld does not support PIE, so if using it this will result
in a failure to build. Instead, default to FW_PIC=n if not supported.
Note that an explicit FW_PIC=y is not overridden, to ensure the build
fails rather than silently producing a position-dependent binary.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When using Clang with a bare-metal triple, -pie does not get passed to
the linker as it's not normally a thing that makes sense, unlike GCC
which will unconditionally forward it on and potentially result in a
linker error. However, LLD does support it, and manually forwarding it
on works as desired, so do so to fully support FW_PIC with Clang and
LLD.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The -N linker option is supposed to make .text writable, but GNU ld and
LLD differ in interpreting what that means. GNU ld will happily let you
have relocations in it, but LLD will see that the input section is
read-only (even though the output section is writable) and give an
error. It's unclear if either of them intend to have that behaviour in
this edge case, but regardless there's no reason not to just put the
data in a writable .data section.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
These are mutually exclusive. GNU as and LLVM both let later binding
directives override earlier ones so this works as intended, but LLVM 12
turned this into a warning as there's no good reason to do such a thing
and could be a potential bug. Thus, remove the redundant and incorrect
.globl directive for fw_platform_init.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The sbi_pmu_exit() crashes on systems not having MCOUNTINHIBIT csr
so to fix this we check SBI_HART_HAS_MCOUNTINHIBIT feature in
sbi_pmu_exit() and do nothing if it is not available.
Fixes: 13d40f21d5 ("lib: sbi: Add PMU support")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Avoid using a magic number, instead use a macro for the version of
struct fw_dynamic_info.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The sanity checks on the magic and version was already done in
fw_boot_hart(), which happens before fw_save_info() is called.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
At present in the rendered platform guide, all instances of <xyz>
are missing. Use < and > to replace <> to make them visible.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Before entering _scratch_init(), register t3 already holds a copy
of the firmware end address, hence there is no need to calculate
it again. This reduces 3 instructions in each _scratch_init() loop.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Add PMU support for generic platform. Generic platform solely relies on
the device tree to parse all pmu related information. If any event is
not described in device tree, generic platform will not support it.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Follow the standard conventon for static function names:
All global functions should be start with sbi_<module name>_
All static functions should be start with <module name>_
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V SBI v0.3 specification defines a set of firmware events that can
provide additional information about the current firmware context. All
of the firmware event monitoring are enabled now. The firmware
events must be defined as raw perf event with MSB set as specified in the
specification.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V SBI specfication 0.3 defines a PMU extension that allows supervisor
mode to start/stop/configure pmu related events. This patch implements
all of the functionality defined in the specification.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The PMU DT node bindings are defined in docs/pmu_support.md
Add few fdt helper functions to parse the DT node and update the
event-counter mapping tables.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V SBI v0.3 specification defined a PMU extension to configure/start/stop
the hardware/firmware pmu events.
Implement PMU support in OpenSBI library. The implementation is agnostic of
event to counter mapping & mhpmevent value configuration. That means, it
expects platform hooks will be used to set up the mapping and provide
the mhpmevent value at runtime.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
A platform hook to initialize PMU allows platform vendors to provide
their own mechanism to define pmu event-counter mappings in addition
to the DT based approach.
Another platform hook that allows platform vendors customize the
final mhpmevent value configuration.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Currently, csr_read/write_num functions are used to read/write PMP related
CSRs where CSR value is decided at runtime. Expand this function to include
PMU related CSRs as well.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Currently, all bits in mcountern are enabled unconditionally at boot time.
With SBI PMU extension, all the programmable counters should enabled only
during performance monitoring for a particular event. However, this is done
only if mcountinhibit is implemented because the supervisor mode can not
start/stop any event without mcountinhibit.
Similarly, supervisor should take care enabling scounteren which allows
U-mode to access programmable pmu counters. All the non-programmable ones
(CY, TM, IR) should be enabled in M-mode because some userspace may rely on
builtins such as __builtin_readcyclecounter. Supervisor OS can still disable
them during initial configuration.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V privilege specification allows the implementation to have less
than 64 bits.
Add a function to detect the number of implemented bits in mhpmcounter
dynamically at runtime.
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V ISA specification v1.11 defined mcountinhibit CSR that allows
software to stop any counter from incrementing. The SBI PMU extension
depends on this CSR support in hardware.
Define mcountinhibit as a hart specific feature and detect it at runtime.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
SBI PMU extension requires a firmware to be aware of the event to
counter/mhpmevent mappings supported by the hardware. One approach
is to encode that information in the device tree.
Define a device tree binding that allows a hardware to describe
all the PMU mappings required in concise format.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
fw_platform_init() fills platform.name without considering the
ending null character. Fix it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
FW_PIC is on by default. Hence no need to explicitly require it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Unify all the file and function names of 'sifive_test' device, to use
the same prefix. This is also a preparatory patch for upcoming sifive
reset device.
Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The ACLINT devices are backward compatible with SiFive CLINT
so we replace all CLINT library usage in various platforms
with ACLINT library. As a result of this replacement, the
CLINT library is not used by any part of OpenSBI hence we
remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add a new FDT based ACLINT MTIMER driver which works for
both CLINT device and standalone ACLINT MTIMER device.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add a new FDT based ACLINT MSWI IPI driver which works for both
CLINT device and standalone ACLINT MSWI device.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add fdt_parse_aclint_node() which can parse both ACLINT and
CLINT DT nodes. This means fdt_parse_clint_node() is not required
anymore so we remove it as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add common ACLINT MSWI library similar to the CLINT library
so that OpenSBI platforms can use it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add common ACLINT MTIMER library similar to the CLINT library
so that OpenSBI platforms can use it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Don't assign an unused value to variable index.
Use operator '-=' where applicable.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Compiling wake_coldboot_harts() with GCC 11 and -Wextra yields:
lib/sbi/sbi_init.c:208:27:
error: comparison of integer expressions of different signedness:
‘int’ and ‘u32’ {aka ‘unsigned int’} [-Werror=sign-compare]
208 | for (int i = 0; i <= sbi_scratch_last_hartid(); i++) {
| ^~
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Compiling sbi_tlb_entry_process() with GCC 11 and -Wextra yields:
lib/sbi/sbi_tlb.c: In function ‘sbi_tlb_process_count’:
lib/sbi/sbi_tlb.c:206:31:
error: comparison of integer expressions of different signedness:
‘u32’ {aka ‘unsigned int’} and ‘int’ [-Werror=sign-compare]
206 | if (deq_count > count)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Current, GET_F64_REG() macro does not generate correct inline
assembly for the RV32 systems. This patch provides separate
definitions of GET_F64_REG() macro for RV32 and RV64 systems.
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
If property csr-copy does not exist, fdt_getprop() will return NULL and cnt
will have a random value from the stack.
Call clone_csrs() only if cnt is initialized to a non-zero value.
Fixes: 49e422c5ad ("lib: utils: reset: Add T-HEAD sample platform reset driver")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
In sbi_scratch_init() we determine the last hart. The index of the last
hart cannot exceed SBI_HARTMASK_MAX_BITS - 1. We should not initialize
last_hartid_having_scratch to a higher number to avoid buffer overflows
when using this value before calling sbi_scratch_init().
When allocating scratch memory in sbi_scratch_alloc_offset() we zero out
the allocated memory for all harts except for the last one. We should not
skip the last hart.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
plicsw_ipi_sync() is a forward declaration but without the actual
implementation. Drop it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Fix several places in the docmentation that are missing spaces.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
- %s/CLINT/PLICSW
- replace '.' with a space
- add a space around * in plicsw_cold_ipi_init()
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The parameter owner of function sbi_scratch_alloc_offset() is never used.
The scratch memory is small. We should not use it for debug information in
future. Hence eliminate the parameter.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The value of the /chosen/stdout-path devicetree property is used to
determine the UART used by openSBI. According to the devicetree
specification the value may contain a hyphen, e.g.
chosen {
stdout-path = "/serial@f00:115200";
};
If the character ':' is present, it terminates the path of the device.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should try other FDT drivers when we see SBI_ENODEV returned
by cold_init() of FDT driver.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We can merge region B onto region A only if base of region A is
aligned to region A order + 1.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Use strncmp() instead of strcmp() in __fixup_find_domain_offset()
so that it compiles fine when linking with external firmware (such
as EDK2).
Signed-off-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Synopsys DesignWare APB UART is seen on the StarFive JH7100 SoC.
Its programming interface is compatible with the existing 8250
UART driver. Simply add its compatible string to the driver makes
it work with the StarFive JH7100 SoC on a BeagleV board.
With this patch, the generic platform firmware can be used out of
the box on the BeagleV board.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
spin_lock_check already returned bool in the source file but not in the
header. With some toolchains that causes an error, as it should.
Because it and related functions all essentially return a bool, we can
use this opportunity to change them.
Signed-off-by: Daniel Schaefer <git@danielschaefer.me>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Now that SiFive HiFive Unleashed board is using the generic platform
support in OpenSBI, let's remove the old non-generic one.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The upstream U-Boot/QEMU have been using generic platform for SiFive
HiFive Unleashed board for some time. Let's document sifive_fu540 as
one of the supported targets for "generic" platform.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch adds support for the UART used by the NOEL-V processor.
Cobham Gaisler's NOEL-V RISC-V processor IP is available under GPL
and commercial license and is described in more detail at
https://www.gaisler.com/noelv.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
With latest U-Boot upstream (v2021.07 in development), the defconfig
name has been changed to sifive_unleashed_defconfig. Update the doc.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We extend the boot-time prints to show various devices provided
(or registered) by the platform support. This will help users
verify hardware devices available for OpenSBI firmwares.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having hsm_start(), hsm_stop() and hsm_suspend()
callbacks in platform operations, it will be much simpler for
HSM driver to directly register these operations as a device
to the sbi_hsm implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having system_reset_check() and system_reset() callbacks
in platform operations, it will be much simpler for reset driver to
directly register these operations as a device to the sbi_system
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having ipi_send() and ipi_clear() callbacks in
platform operations, it will be much simpler for ipi driver
to directly register these operations as a device to sbi_ipi
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having timer_value(), timer_event_start(), and
timer_event_stop() callbacks in platform operations, it will
be much simpler for timer driver to directly register these
operations as device to the sbi_timer implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having console_putc() and console_getc() callbacks in
platform operations, it will be much simpler for console driver to
directly register these operations as device to the sbi_console
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We now have sbi_domain_root_add_memregion() which allows platform
support to add root domain regions at boot-time so let's remove
the domains_root_regions() platform callback which was added
for this purpose.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We could use platform/generic instead, and won't use
platform/thead/c910 again.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Let's have FW_PIC enabled by default so that OpenSBI firmware
can by default run from any physical address.
Tested with qemu_rv32 & rv64, T-HEAD all hardwares.
Suggested-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Tested-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We should decrement root_memregs_count by one after merging two
memregions otherwise new memregion added after a merge will be
appended after last sentinel memregion of zero order.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Figure out CLINT has_64bit_mmio from DT node and using antonym for
compatibility.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The sbi_domain_memregion_initfw() is no longer used outside
sbi_domain.c so let's make it a local function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We should copy over all restricted memregions from the root domain
to the domains populated from FDT. These restricted root memregions
are typically firmware memregion and M-mode only mmio memregions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We make the the root domain instance global variable so that
platform support and drivers can iterate over the root domain
regions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The CLINT memory should not be accessed by the supervisor-mode
software so let's protect it by adding CLINT memregion to the
root domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We should allow platform support to add more root memory regions
before domains are finalized. This will help platform support to
protect critical M-mode only resources.
This patch adds sbi_domain_root_add_memregion() API for above
described purpose.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds sbi_domain_memregion_init() helper API which can
be used by platform support to initialize a domain memory region
before adding it to the root domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The domains are boot-time system-level partitions so we should
allow platform support to register domains only before hart
domain assignments are finalized.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Updates link in platforms documentation to point to the correct
OpenPiton document.
Signed-off-by: hasheddan <georgedanielmangum@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The unsigned length may be 4 bytes or 8 bytes, amoadd.w only applies
to 4 bytes hence this patch.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Replace the test-and-set spinlock implementation with ticket locks
in order to get fairness (in form of FIFO order).
The implementation uses a 32-bit wide struct, which consists of
two 16-bit counters (owner and next). This is inspired by similar
spinlock implementations on other architectures.
This allows that the code works for both, RV32 and RV64.
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The current implementation of SPIN_LOCK_INIT() provides the spinlock
to be initialized as reference. This does not allow a direct
initialization of the spinlock object at the creation site.
Let's pass the spinlock directly instead (like Linux does as well)
and adjust all users of the macro (in fact there is only one user).
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The __aligned(x) macro is a common wrapper around compiler's
aligned attribute, which allow to define the minimum alignement
of a data type. Let's add this macro.
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The "add sp, a0, zero" instruction in the trap restore path is redundant
and can be avoided if TRAP_RESTORE_xyz() assembly macros use a0 as the
base register instead of sp.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
csr_read_allowed/csr_read_allowed requires trap.case to detect the results,
but if no exception occurs, the value of trap.case will remain unchanged,
which makes the detection results unreliable. Add code to initialize
trap.case to 0.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There are two copies of the same abnormal exit code, this patch deletes one
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Current fdt_plic_fixup() only does necessary fix-up against the legacy
"riscv,plic0" node. The upstream Linux kernel defines its official DT
bindings which uses "sifive,plic-1.0.0" as the compatible string and
we should check that first, and if not present fall back to legacy.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
At present fdt_plic_fixup() accepts a 'compat' parameter for PLIC
compatible string. In preparation to support the new DT bindings,
drop this and use "riscv,plic0" directly in fdt_plic_fixup().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings")
adds the official DT bindings for CLINT, which uses "sifive,clint0"
as the compatible string. "riscv,clint0" is now legacy and has to
be kept for backward compatibility of legacy systems.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
GCC has already a predefined macro __ASSEMBLER__ therefore, it can be
used without the need to define a new flag with -D__ASSEMBLY__.
This is useful when adding the library to projects having a build
system such one can build without the need to make changes.
THe build system does not use the Makefile in the sources tree.
Signed-off-by: Marouene Boubakri <marouene.boubakri@nxp.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The trap handler sbi_emulate_csr_read() invokes hpm_allowed() which reads
CSR 0x306 (mcounteren). The K210 does not support CSR 0x306. While trying
to handle a trap occurring in S-mode code this creates an additional trap
in M-mode. This results in failure to redirect to S-mode and the system
hanging in sbi_hart_hang().
In hart_detect_features() we have already determined if CSR 0x306 is
available and stored that information in the scratch area. We can use this
information to decide if CSR 0x306 shall be accessed in hpm_allowed() and
thus avoid the M-mode trap.
Likewise if CSR scounteren is not available we have to avoid reading CSR
0x106.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Enable OpenSBI to support position independent execution. Because the
position independent code will cause an additional GOT reference when
accessing the global variables, it will reduce performance a bit. Therefore,
the position independent execution is disabled by default. Users can
through specifying "FW_PIC=y" on the make command to enable this feature.
In theory, after enabling position-independent execution, the OpenSBI
can run at arbitrary address with appropriate alignment. Therefore, the
original relocation mechanism will be skipped. In other words, OpenSBI will
directly run at the load address without any code movement.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When OpenSBI is compiled as fPIE mode, the assembler will translate "la"
to GOT reference pattern. It will cause to cost an additional load
instruction when obtaining the symbol address. However, if the symbol
locates within the positive or negative 2GB region, we can use "lla"
instead of "la" to avoid unneeded GOT references. This patch assumes that
the OpenSBI image excluding the payload does not exceed 2GB. Based on
this assumption, all "la" instructions are replaced by "lla" to avoid
performance degradation when compiling as fPIE mode.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The SBI function IDs for RFENCE extension must match the SBI specification.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_platform_ipi_clear() called from wait_for_coldboot() and
sbi_hsm_hart_wait() is redundant because IPI will be automatically
cleared by sbi_platform_ipi_init() called from sbi_ipi_init().
Further, wait_for_coldboot() is common for warm startup and warm
resume path so the sbi_platform_ipi_clear() called in warm resume
path cause resuming HART to miss an IPI injected other HART to
wakeup the HART.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The OpenSBI SBI implementation is now compliant with latest draft
SBI v0.3 specification so let's upgrade SBI implementation version.
This will also help HSM suspend function detection in S-mode because
HSM suspend function is only present when HSM extension is present
and SBI implementation version is 0.3 (or higher).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch implements the SBI HSM suspend function. Using this
new SBI call, the S-mode software can put calling HART in platform
specific suspend (i.e. low-power) state. For a successful retentive
suspend, the SBI call will return without errors upon resuming
whereas for a successful non-retentive suspend, the SBI call will
resume from a user provided resume address.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add hart_suspend() callback in platform operations which will
be used by HSM implementation to enter retentive or non-retentive
suspend state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add sbi_hart_reinit() function which will re-initialize HART CSRs
assuming HART features are already detected. This new function will
be useful in re-initializing HART after it resumes from HSM SUSPENDED
state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hsm_hart_start() and sbi_hsm_hart_stop() functions should
only return error codes as defined by the SBI specification.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hsm_hart_started() function is only used by sbi_hsm_hart_stop()
for checking state of calling HART and current domain assignment.
The atomic_cmpxchg() called by sbi_hsm_hart_stop() will check state of
calling hart anyway and domain assignment can be checked by other domain
function such as sbi_domain_is_assigned_hart().
This means sbi_hsm_hart_started() is redundant and can be removed.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
A hart can take interrupt in the new HSM states introduced by the
SBI HSM suspend function (such as SUSPENDED state) so we rename
sbi_hsm_hart_started_mask() to something more generic such as
sbi_hsm_hart_interruptible_mask().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We replace the use of SBI_STATE_xyz defines with SBI_HSM_STATE_xyz
defines because the HSM state defines are complete enough to implement
HSM state machine in OpenSBI. As a result of this, we can now remove
sbi_hsm_hart_state_to_status() function because it is now redundant
and sbi_hsm_hart_get_state() can directly return HSM state or error.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We simplify HSM state define names so that these defines can directly
replace SBI_HART_xyz defines used by SBI HSM implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Implement rebooting the K210 via the system reset extension.
All reset types are treated in the same way.
A request for shutdown results in a reboot.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This clint driver init functions were incorrectly used in
template platform which resulted in compile error. This patch
fixes clint driver function usage in template platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We don't need to pack struct sbi_platform and sbi_platform_operations
because GCC ensures member offsets match member data type irrespective
to the target system (RV32 or RV64). This also allows GCC to generate
more optimized instruction sequence when accessing members of struct
sbi_platform and struct sbi_platform_operations.
Reported-by: Paul Campbell <taniwha@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
All members in struct sbi_scrach are of machine word size so no need
to pack this structure. This also allows GCC to generate more optimized
instruction sequence when accessing members of struct sbi_scratch.
Reported-by: Paul Campbell <taniwha@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
All members in struct sbi_trap_regs are of machine word size so
no need to pack this structure. This also allows GCC to generate
more optimized instruction sequence when accessing members of
struct sbi_trap_regs.
Reported-by: Paul Campbell <taniwha@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the root domain memory regions are fixed in generic
code but some of the platforms may want to explicitly define
memory regions for the root domain.
This patch adds optional domains_root_regions() platform callback
which platforms can use to provide platform specific root domain
memory regions. Due to this changes, the root domain should also
undergo all sanity checks (just like regular domain) so we use
sbi_domain_register() to register root domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Fix uart_putc implementation.
Due to a bug in the IP, this went unnoticed.
Use macros instead of magic numbers to make the code
more readable.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently, we have fixed TLB flush types supported by the
remote TLB library. This approach is not flexible and does
not allow custom local TLB flush function. For example,
after updating PMP entries on a set of HARTs at runtime,
we have to flush TLB on these HARTs as well.
To support custom local TLB flush function, we replace the
"type" field of "struct sbi_tlb_info" with a local TLB flush
function pointer. We also provide definitions of standard TLB
flush operations (such as fence_i, sfence.vma, hfence.vvma,
hfence.gvma, etc).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We introduce sbi_trap_exit() API which can help non-firmware
(i.e. generic or platform) code to force exit trap/interrupt
handling and resume execution at context pointed by parameter
"const struct sbi_trap_regs *regs".
This new sbi_trap_exit() API will help Keystone Enclave project
to resume execution of enclave from custom SBI call handler.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We had added args pointer in ecall handler to ensure that ecall
handler only implements functionality and does not deal with
SBI calling convention. This also helped us to keep SBI calling
convention related code in one place at sbi_ecall_handler().
The Keystone Enclavce project needs access to the trap regsiters
in their ecall handler so that they can context switch enclaves
in custom SBI calls. To help the Keystone Enclave project, we
replace the args pointer in ecall handler parameter with a const
pointer to trap registers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The misaligned load emulation does not sign-extend values correctly
due to missing sign typecast in value passed to the SET_RD() macro.
A very easy way to reproduce this issue is to load 16-bit value
0xff1e from a byte aligned address using LH instruction on hardware
lacking misaligned load/store.
This patch fixes sbi_misaligned_load_handler() for above issue.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The domain_get() platform callback function is now redundant
because fdt_domain_populate() register new domain explicitly
using the sbi_domain_register() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_domain_get() function is now redundant because the
fdt_domains_populate() function can explicitly register new
domains using the sbi_domain_register() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add sbi_domain_register() function to help platform code register
a new domain explicitly instead of depending on domain_get() platform
callback. This function will eventually help us completely remove the
domain_get() platform callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend fdt_iterate_each_domain() and fdt_iterate_each_memregion()
functions to allow underlying iteration function to fail. This will
help us catch more domain misconfiguration issues at boot time.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The generic platform should populate domains from FDT using the
domain FDT helper routines.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add various helper routines to populate domains, iterate domains,
iterate domain memregions, and parse HART to domain assignment from
the FDT.
These helper routines can be used by platform support code and FDT
fixup code.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch adds domain device tree binding documentation in the
OpenSBI domain support documentation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We introduce domains_init() platform operation which can be used by
platform support to initialize/populate domains in the coldboot path.
The domains_init() is called late in the coldboot sequence from the
sbi_domain_finalize() so sbi_printf() can be used by platform support
to print errors/warnings at time of populating domains.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add error prints in sbi_domain_finalize() and sanitize_domain()
to help debug domain configuration issues.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
If coldboot HART is assigned to a domain then we should use coldboot
HART as the boot HART of the domain. This allows coldboot HART to
continue boot sequence even when it is assigned to some non-root domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should use lower bits for domain memory region access permissions
and higher bits for other domain memory region attributes. This helps
us use same bit assignment for parsing domain memory region access
permissions from device tree.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_domain_finalize() should auto start a domain only if the
boot HART is withing limits (i.e. less than SBI_HARTMASK_MAX_BITS).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The domain_count check in sbi_domain_finalize() for newly discovered
domain is incorrect and should be reversed.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
There has been typo in automatic domain boot hart startup
for non-root domains so this patch fixes it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should check and access N-extension CSRs in sbi_hart_switch_mode()
when next_mode is u-mode because N-extension is optional.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
On RV32 systems, we have two CSRs for M-mode status (MSTATUS and
MSTATUSH) when H-extension is implemented. This means we have to
save/restore MSTATUSH for RV32 systems only when H-extension is
implemented. The current _trap_handler() has extra instructions
(roughly 10) for conditional save/restore of MSTATUSH CSR.
These extra instructions in RV32 _trap_handler() can be avoided
if we create separate low-level trap handler for RV32 systems
having H-extension. This patch optimizes low-level trap handler
for RV32 systems accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The SBI SRST extension has been accepted and merged in the latest
SBI v0.3-draft specification.
(Refer, https://github.com/riscv/riscv-sbi-doc)
It allows to S-mode software to request system shutdown, cold reboot,
and warm reboot.
This patch implements SBI SRST extension as a replacement of the
legacy sbi_shutdown() call of SBI v0.1 specification.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
To implement the SBI SRST extension, we need two platform operations
for system reset:
1) system_reset_check() - This operation will check whether given
reset type and reason are supported by the platform
2) system_reset() - This operation will do the actual platform
system reset and it will not return if reset type and reason
are supported by the platform
This patch updates system reset related code everywhere as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Few platforms have dummy system reset functions so let's remove
these dummy system reset functions to allow generic code deal
with it in the right way.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can now use the standard SBI SRST extension reset types instead
of the opensbi specific (SBI_PLATFORM_RESET_xyz) reset types hence
remove related opensbi specific defines. The "platform_" prefix of
the reset type parameter of sbi_system_reset() function should also
be removed.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend the SBI ecall interface header for the SBI SRST extension
recently accepted in SBI specification v0.3-draft.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, we have all boot prints at the end of cold boot sequence
which means if there is any failure in cold boot sequence before
boot prints then we don't get any print.
This patch improves boot prints in cold boot sequence as follows:
1. We divide the boot prints into multiple parts and print it
from different locations after sbi_console_init()
2. We throw an error print if there is any failure in cold boot
sequence after sbi_console_init()
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When PLATFORM_RISCV_ABI and PLATFORM_RISCV_ISA are not specified,
we force "-mabi=lp64 -march=rv64gc" for RV64 and force "-mabi=ilp32
-march=rv32gc" for RV32. This can prevent users from using the
toolchain default "-mabi" and "-march" options.
To allow using toolchain defaults, we add compile-time option
PLATFORM_RISCV_TOOLCHAIN_DEFAULT which when enabled forces the
top-level makefile to use toolchain default ABI and ISA string.
To enable the option, pass "PLATFORM_RISCV_TOOLCHAIN_DEFAULT=1"
to top-level make.
Reported-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We know about pmp granularity and number of bits supported by PMP.
Show those information in the boot time info print
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As per RISC-V privilege specification, a platform may choose to implement
a coarser granularity scheme for PMP addresses. In that case, we shouldn't
allow any pmp region size smaller than the platform supports. A platform
may not also implement all the bits for a PMP address specified in the priv
specification.
The pmp range granularity and address bits should be detected dynamically
before detecing PMP regions. Any pmp modification request beyond these detected
value must not succeed.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The "reg" property in a device node may not be the correct address always.
If a parent node defines a "ranges" property, the child address need to be
translated with respect to parents address. If the ranges property is not
present, it will just use 1:1 translation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We add initial documentation for OpenSBI domain support to help
RISC-V platform vendors achieve system-level partitioning.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend boot prints to display details of each domain. In the
process, we remove sbi_hart_pmp_dump() because it shows redundant
information which domain details already show.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The PMP configuration on each HART should be only based on the memory
regions of the assigned domain because each domain includes a memory
region to protect the underlying firmware.
This patch updates the sbi_hart_pmp_configure() function accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hart_pmp_get() and sbi_hart_pmp_check_addr() functions
are not used anymore hence this patch removes these functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_cpu_fixup() should disable a HART in DT if the HART
is not assigned to the current HART domain. This patch updates
fdt_cpu_fixup() accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that each HART is mapped to a domain having a set of memory
regions, we update fdt_reserved_memory_fixup() to use domain memory
regions for adding reserved memory nodes in device tree.
We also change reserved memory node name prefix from "mmode_pmp"
to "mmode_resv" because domain memory regions can impact other
hardware configurations (such as IOPMP, etc) along with PMP.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_system_reset() should issue platform system reset only if
domain of current HART is allowed to do system reset.
This patch extends sbi_system_reset() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Instead of calling sbi_hsm_hart_get_state() in a loop, we can simply
call a new inline __sbi_hsm_hart_get_state() which only takes "hartid"
and enforce domain checks using sbi_domain_assigned_hartmask().
This patch optimizes sbi_hsm_hart_started_mask() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hsm_hart_start() should consider the domain under which we
are trying to start the HART. This will help ensure that HART A can
start HART B only if both HARTs A and B belong to the same domain.
We also have a special case when we bring-up boot HART of non-root
domains in sbi_domain_finalize() where we should skip domain checks
in sbi_hsm_hart_start(). To achieve this, sbi_hsm_hart_start() should
do domain checks only when domain parameter is non-NULL.
This patch extends sbi_hsm_hart_start() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hsm_hart_started_mask() API should take one more parameter
to allow caller specify domain under which started_mask is being
generated. Further, the sbi_hsm_hart_started_mask() depends on
sbi_hsm_hart_get_state() which also should return HART state under
specified domain.
This patch updates both sbi_hsm_hart_started_mask() and
sbi_hsm_hart_get_state() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
An OpenSBI domain is a logical entity representing a set of HARTs
and a set of memory regions for these HARTs.
The OpenSBI domains support will allow OpenSBI platforms and previous
booting stage (i.e. U-Boot SPL, Coreboot, etc) to partition a system
into multiple domains where each domain will run it's own software.
For inter-domain isolation, OpenSBI will eventually use various HW
features such as PMP, ePMP, IOPMP, SiFive shield, etc but initial
implementation only use HW PMP support.
This patch provides initial implementation of OpenSBI domains where
we have a root/default domain and OpenSBI platforms can provide
non-root/custom domains using domain_get() callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hartmask_test_hart() does not modify hartmask so the
hartmask pointer parameter should be declared const.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The hartid parameter of sbi_hart_init() is not used anywhere in
sbi_hart_init() implementation so let's remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We factor-out PMP configuration from sbi_hart_init() as a separate
sbi_hart_pmp_configure() function and do the PMP configuration very
late in coldboot and warmboot path just before platform_final_init().
Eventually, this enable us to configure PMP totally based on OpenSBI
domain where OpenSBI domains can be parsed from device-tree in any of
the platform operations except platform_final_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The pmp_region_xyz() callbacks are not required in sbi_platform_operations
because we will be using OpenSBI domain memory regions to program the
PMP CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The sbi_ecall.h and sbi_trap.h are not required to be included in
sbi_platform.h hence we remove it. This way sources requiring
these headers will have to explicitly include it thereby reducing
implicit includes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The Kendryte K210 platform has built-in DTB and does not provides
FW_PAYLOAD_FDT_ADDR. This means the FDT fixups will be done on
the built-in DTB in absence of FW_PAYLOAD_FDT_ADDR. This patch
adds some padding in built-in DTB for FDT fixups.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend d2c.sh to allow padding zeros in output C source when
converting DTB to C source. Using this feature, platforms can
create extra room for in-place FDT fixups on built-in DTBs.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The FW_PAYLOAD_FDT_PATH compile-time option is replaced by
FW_FDT_PATH compile-time option which is more flexible and
common across all OpenSBI firmwares.
This patch removes FW_PAYLOAD_FDT_PATH and updates related
documentation to use FW_FDT_PATH.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, only FW_PAYLOAD has mechanism to embed external
FDT using FW_PAYLOAD_FDT_PATH compile-time option.
This patch adds a common FW_FDT_PATH compile-time option to
embed external FDT for all OpenSBI firmwares (i.e FW_JUMP,
FW_PAYLOAD, and FW_DYNAMIC).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the make rules for ELF, BIN and LD script are little
generic to allowing ELF, BIN and LD script to be anywhere in the
build directory. For OpenSBI firmwares, the ELF, BIN, and LD script
are always platform specific so we update make rules accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
HiFive unleashed currently implements fewer than 56 bits of physical
address so existing PMP CSR detection is broken.
PMP address register encodes bits 55-2 of a 56-bit physical address,
Not all physical address bits may be implemented, So just check
minimum 1 bit.
Fixes: 74d1db7062 ("lib: sbi: Improve PMP CSR detection and
progamming")
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently, the generic platform fw_platform_init() marks non-MMU
HARTs (e.g. E-core on SiFive Unleashed) as invalid. This means
such non-MMU HARTs won't be allowed to go ahead by sbi_init().
The sbi_init() now has a check for next stage privilege mode when
selecting coldboot HART. This check will force non-MMU HARTS (i.e.
HARTs without S-mode) to proceed in warmboot path and wait in the
HSM STOPPED state. This means we don't need to mark non-MMU HARTs
as invalid in generic platform fw_platform_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The coldboot HART jumps to the next booting stage at the end of
init_coldboot() so it is absolutely necessary for coldboot HART
to support the privilege mode expected by the next booting stage.
We extend the coldboot HART selection in sbi_init() to ensure that
the selected coldboot HART always supports privilege mode specified
in scratch space (i.e. scratch->next_mode). This will further help
us allow E-core (without MMU) on SiFive Unleashed and PolarFire
ICICLE boards to proceed further and wait in HSM STOPPED state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_cpu_fixup() should work fine even if HARTs without MMU
are not marked invalid by platform support code.
In future, we plan to treat HARTs without MMU as valid in the
generic platform support so that we can hold these HARTs in
HSM STOPPED state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend sbi_hart_pmp_check_addr() API so that users can specify
privilege mode of the address for checking PMP access permissions.
To achieve this, we end-up converting "unsigned long *size" parameter
to "unsigned long *log2len" for pmp_get() implementation so that we
can deal with regions of "1UL << __riscv_xlen" size in a special case
in sbi_hart_pmp_check_addr() implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_scratch already has provision to specify the next stage mode
so we can leverage this to specify start mode to sbi_hsm_hart_start().
In future, this will be useful in providing SBI calls to U-mode on
embedded cores where we M-mode and U-mode but no S-mode.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should allow M-mode to M-mode ECALLs because:
1. No other mode can handle M-mode ECALLs
2. In future, we can allow M-mode baremetal application (not
linked to OpenSBI) running independently and cooperatively
without corrupting OpenSBI M-mode state (CSRs and memory).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We rename CAUSE_HYPERVISOR_ECALL to CAUSE_SUPERVISOR_ECALL and
CAUSE_SUPERVISOR_ECALL to CAUSE_VIRTUAL_SUPERVISOR_ECALL so that
it matches latest RISC-V privilege spec.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The VS-mode ecall is supposed to be handled by HS-mode so
sbi_trap_handler() should fallback to default case for
VS-mode ecall trap.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We improve HPM CSR read/write emulation as follows:
1. Fail for unimplemented counters so that trap is redirected
to S-mode which can further help debugging S-mode software.
2. Check permissions in both MCOUNTEREN and SCOUNTEREN for
HS-mode and U-mode.
3. Don't check permissions for TIME CSR because we emulate
TIME CSR for both Host (HS/U-mode) and Guest (VS/VU-mode).
Also, faster TIME CSR read is very helpful for good
performance of S-mode software.
4. Don't emulate S-mode CSR read/write to M-mode HPM CSRs
because these should not be accessible to S-mode software.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch does following cosmentic changes to riscv_encoding.h:
1. Re-organize CSR defines to match CSR listing in latest RISC-V
privilege spec
2. Rename CSR_HCOUNTERNEN to CSR_HCOUNTEREN
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
A RISC-V platform can leave unimplemented MHPM counters hard-wired
to zero. We extend hart_detect_features() to detect MHPM counters
which are accessible and not hard-wired to zero. We also print
number of available MHPM counters as part of boot prints.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
As-per latest RISC-V privilege spec up to 64 PMP entries are supported.
Implementations may implement zero, 16, or 64 PMP CSRs. All PMP CSR
fields are WARL and may be hardwired to zero.
This patch improves PMP CSR detection and progamming considering
above facts.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The SBI_HART_HAS_PMP feature is redundant because we already
have number of PMP regions returned by sbi_hart_pmp_count().
Checking whether PMP is supported for a HART can be simply done
by checking non-zero value returned by sbi_hart_pmp_count().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The Kendryte K210 follows RISC-V v1.9 spec so MTVAL has instruction
address (instead of instruction encoding) on illegal instruction trap.
To handle above case, we fix sbi_illegal_insn_handler() without any
impact on RISC-V v1.10 (or higher) systems. This achieved by exploiting
the fact that program counter (and instruction address) is always 2-byte
aligned in RISC-V world.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have thundering hurd problem with coldboot_lock where the
boot HART can potentially starve trying to acquire coldboot_lock
because some of the non-boot HARTs are continuously acquiring and
releasing coldboot_lock. This can happen if MIP.MSIP bit is already
set for some of the non-boot HARTs.
To avoid thundering hurd problem for coldboot_lock, we use the
__smp_load_acquire() and __smp_store_release() for coldboot_done
flag and use coldboot_lock only for coldboot_wait_hmask.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
When passing the device tree to the next stage we should apply necessary
device tree fix-ups first. These include:
* fix up the CPU node in the device tree
* fix up the PLIC node in the device tree
* fix up the reserved memory node in the device tree
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When redirecting from VS/VU-mode to HS-mode, hstatus.SPVP was set
to the value of mstatus.SPP, as according to the specification both
flags should be set to the same value.
However, the assignment of SPVP takes place before SPP itself is
updated, which results in SPVP having an outdated value.
Signed-off-by: Georg Kotheimer <georg.kotheimer@tu-dresden.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently, the low-level trap handler (i.e. _trap_handler()) uses
branch instructions to conditionally setup exception stack based
on which mode trap occured.
This patch implements exception stack setup using xor instructions
which is faster with same number of instructions due to lack of
branch instructions.
The new exception stack setup approach can be best described by the
following pseudocode:
Came_From_M_Mode = ((MSTATUS.MPP < PRV_M) ? 1 : 0) - 1;
Exception_Stack = TP ^ (Came_From_M_Mode & (SP ^ TP))
Came_From_M_Mode = 0 ==> Exception_Stack = TP
Came_From_M_Mode = -1 ==> Exception_Stack = SP
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
If MTINST[0:0] bit is 1 then we have transformed instruction encoding
in MTINST CSR. For transformed instructions, if the MTINST[1:1] bit
is Zero then original trapped instruction was a 16bit instruction
which was converted to 32bit instruction at time of taking trap.
We should use MTINST[1:1] bit to determine correct instruction length
of transformed instruction.
This patch updates misaligned load/store emulation as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Use strncmp instead of using sbi_strcmp directly in fdt_parse_hart_id()
to allow compiling fdt_helper.c by external firmware.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The value assigned to x by the shift assignment in the last if block of
ffs/fls is never read. Remove it.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently 256 bytes is used for the FDT expand size when fixing up
reserved memory node. Increase it to 1024 bytes with an estimated
size of 64 bytes per PMP memory region by 16 regions in total.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Consistently use reference-style markdown links in the README. This
won't show the URL next to the linked text for the [Github] and [U-Boot]
links and link the text "Bootlin toolchain repository" instead of
showing it verbatim with the URL next to it.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
U-Boot v2020.07 release adds SPL support to SiFive HiFive Unleashed.
Update the doc to mention that detailed build instructions are in the
U-Boot doc.
This also adds detailed command line description to show how to boot
U-Boot v2020.07 S-mode payload in the QEMU chapter.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Since QEMU v5.1, if there is no "-bios" option provided, the default
OpenSBI firmware will be loaded by QEMU as the BIOS automatically,
hence to load fw_payload type image, we should explicitly pass the
"-bios" option to QEMU.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Since QEMU v5.1, if there is no "-bios" option provided, the default
OpenSBI firmware will be loaded by QEMU as the BIOS automatically,
hence to load fw_payload type image, we should explicitly pass the
"-bios" option to QEMU.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should only return valid error codes from SBI ecalls as
defined by the RISC-V SBI spec.
To achieve this:
1. We use SBI_Exxxx defines for OpenSBI internal errors with
error values starting from -1000
2. We use SBI_ERR_xxxx defines for errors defined by SBI spec
3. We map some of the SBI_Exxxx defines to SBI_ERR_xxxx defines
which are semantically same
4. We throw a error print and force return error code to
SBI_ERR_FAILED in sbi_ecall_handler() if we see an invalid
error code being returned to S-mode
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
On RV64,"unsigned long" is 64bit and "unsigned int" is 32bit. So in
function "pmp_get" and "pmp_set", if "pmpcfg_shift >= 32", "0xff << pmpcfg_shift"
will go beyond "unsigned int" width. This patch tries to fix this issue.
In function 'pmp_get':
cfgmask = (0xff << pmpcfg_shift);
-->
cfgmask = (0xffUL << pmpcfg_shift);
In function 'pmp_set':
cfgmask = ~(0xff << pmpcfg_shift);
-->
cfgmask = ~(0xffUL << pmpcfg_shift);
Signed-off-by: Liush <liush.damon@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
C-Class is a member of the SHAKTI family of processors from Indian
Institute of Technology - Madras(IIT-M).
It is an extremely configurable and commercial-grade 5-stage in-order
core supporting the standard RV64GCSUN ISA extensions.
https://gitlab.com/shaktiproject/cores/c-class/blob/master/README.md
We add OpenSBI support for Shakti C-class SoC.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Changes are made to support our FPGA evaluation board,
it has DDR memory(0xA0000000-0xB0000000).
* Adapt the config.mk to match FPGA evaluation board DDR memory address
* Since the RISC-V CPU core frequency of FPGA might change, so we use the
fixed TIMER frequency to measure the real CPU core frequency.
* And the UART baudrate has to set to 57600bps for Nuclei FPGA evaluation
board when CPU core frequency is about 8MHz, otherwise the UART input
will not work correctly.
Signed-off-by: Huaqi Fang <578567190@qq.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This is achieved by removing the 'no-map' property from the
'reserved-memory' node when PMP is present, otherwise we keep it as it
offers a small protection if the OS does not map this region at all.
A new callback in platform_override is introduced and allows to fixup the
device-tree. It is used here to override this new default behaviour on
SiFive Fu540 platforms that has an erratum that prevents S-mode software
to access a PMP protected region using 1GB page table mapping.
If PMP is present, telling the OS not to map the reserved regions does not
add much protection since it only avoids access to regions that are already
protected by PMP. But by not allowing the OS to map those regions, it
creates holes in the OS system memory map and prevents the use of
hugepages which would generate, among other benefits, less TLB miss.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The arguments/parameters of __sbi_hfence_gvma_vmid_gpa() and
__sbi_hfence_vvma_asid_va() functions are swapped so we fix it.
Currently, we did not face any issues because QEMU does a full
TLB flush for all HFENCE instructions.
We also improve documentation of HFENCE.GVMA and HFENCE.VVMA
instruction encoding.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch contains the following AE350 specific SBIs:
- get mcache_ctl status
- get mmisc_ctl status
- set mcache_ctl status
- set mmisc_ctl status
- I-cache operation
- D-cache operation
- enable/disable L1-I-cache prefetch
- enable/disable L1-D-cache prefetch
- enable/disable non-blocking load store
- enable/disable write-around
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Reviewed-by: Anup Patel <Anup.Patel@wdc.com>
Reviewed-by: Atish Patra <Atish.Patra@wdc.com>
U-Boot now supports loading Linux kernel image via network and storage
media. Thus, we don't need to use a combined payload containing both
U-Boot & Linux kernel image to boot Linux from U-Boot prompt.
Remove the old documentation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The doxygen config option "USE_MDFILE_AS_MAINPAGE" can be used to set
the main page in doxygen generated pdf. This allows us to remove the
"#mainpage" from the README file which markdown doesn't parse.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
To support RISC-V hypervisor v0.6.1, we:
1. Don't need to explicitly forward WFI traps from VS/VU-mode
2. Have to delegate virtual instruction trap to HS-mode
3. Have to update trap redirection for changes in HSTATUS CSR
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that no platform is using FW_PAYLOAD_FDT mechanism, we
remove related code from Makefile and related documentation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We update kendryte/k210 to use new mechanism of having builtin DTB
where we convert k210.dts to C source and further compile-n-link it
with libplatsbi.a.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, we can only include one DTB as builtin for a platform
using FDT_PAYLOAD_DTB make variable in platform config.mk.
This patch adds new mechanism using which we can convert any DTS
file to C source and futher compile-n-link it with libplatsbi.a.
The generated C source will have the DTB contents as an array
"const char <varprefix>_start[]" where <varprefix> is specified
in platform objects.mk makefile.
Example1
--------
If we have built-in k210.dts and desired <varprefix> is
"dt_k210" then specify following in platform objects.mk:
platform-objs-y += k210.o
platform-varprefix-k210.o = dt_k210
Example2
--------
If we have built-in abc/k210.dts and desired <varprefix> is
"dt_abc_k210" then specify following in platform objects.mk:
platform-objs-y += abc/k210.o
platform-varprefix-abc-k210.o = dt_abc_k210
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
In order to use GCC style defines and macros in DTS, we should
preporcess builtin DTS before converting it to DTB.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the fw_platform_init() does not return anything but we can
further improve by allowing fw_platform_init() to return updated FDT
location.
It is certainly not mandatory for fw_platform_init() to return a new
location of FDT (or modify FDT). In fact, the fw_platform_init() can
always return the original FDT location (i.e. 'arg1') unmodified.
This new capability of fw_platform_init() will allow platforms to:
1. Have multiple built-in FDTs and select one
2. Modify FDT before using based on platform specific straps or OTP
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, we are ORing FW_OPTIONS with the options passed by
previous booting stage to fw_dynamic. This causes confusion
because compiling fw_dynamic with FW_OPTIONS=0x2 does not force
enable boot prints as the U-Boot SPL passes options=0x1 in
fw_dyanmic_info.
The best thing to do is always prefer FW_OPTIONS when available.
This is intuitive for OpenSBI users and easy in debugging.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, fw_prev_arg1() is called after fw_platform_init() which
caused builtin DTB to be not available to fw_platform_init().
To allow builtin DTB available to fw_platform_init(), we should
call fw_save_info() and fw_prev_arg1() before fw_platform_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The make rule for builtin DTB compilation does not consider
out-of-tree platforms so this patch fixes it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have multiple matching DT nodes of the same FDT timer driver
so in this case we should call cold_init() for all matching DT nodes
instead of just first matching DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have multiple matching DT nodes of the same FDT ipi driver
so in this case we should call cold_init() for all matching DT nodes
instead of just first matching DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_clint_node() function which will be used by
fdt_ipi_clint and fdt_timer_clint drivers to parse CLINT details
from DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend CLINT cold init function to have a "struct clint_data *"
parameter pointing to CLINT details. This allows platforms to use
CLINT functions for multiple CLINT instances.
When multiple CLINTs are present, the platform can also provide
one of the CLINT as reference CLINT for other CLINTs. This will
help CLINTs to sync their time value with reference CLINT using
a time_delta computed in warm init function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have multiple matching DT nodes of the same FDT irqchip
driver so in this case we should call cold_init() for all matching
DT nodes instead of just first matching DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend fdt_find_match() implementation by adding node offset
parameter which represents the first node to match from.
The improved fdt_find_match() can be used to find multiple
match nodes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend all PLIC functions to have a "struct plic_data *"
parameter pointing to PLIC details. This allows platforms to
use these functions for multiple PLIC instances.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The "target_hart" and "hart_count" parameters of PLIC cold and
warm init functions are only used for sanity checks and not
required in PLIC initialization.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
It is not mandatory for a RISC-V systems to implement all PMP
regions so we have to check all PMPADDRx CSRs to determine excat
number of supported PMP regions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
This patch does few cosmetic improvements to HART feature detection:
1. Remove sbi_ perfix from HART feature detection functions
because all local/static functions in sbi_hart.c don't have
sbi_ prefix
2. Remove sbi_hart_set_feature() because it's quite small and
local/static in sbi_hart.c
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
It makes more sense to have scratch pointer as parameter in
HART feature APIs because:
1. We already have scratch pointer at places where these APIs
are used.
2. This is consistent with lot of other APIs in sbi_hart.h
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
On platforms with continuous HART ids starting from zero:
0 <= boot HART id < platform HART count
The above co-relation of boot HART id and platform HART count
is true for most RISC-V platfors so it's better to print platform
HART count just before boot HART id.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We do following improvements for get_feature_str():
1. We should return "none" from get_feature_str() no features
available instead of sbi_boot_prints() explicitly handling
failure.
2. We don't need to return failure (just like misa_xlen())
because we are returning "none" for no features and we are
truncating output when space is not available.
3. Based on 1 and 2, the sbi_boot_prints() can be further
simplified.
4. No need for two char[] in sbi_boot_prints()
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should detect HART features in sbi_hart_init() before
mstatus_init(), delegate_traps() and pmp_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, unprivileged access functions uses few additional instructions
which are redundant. It also uses specific registers which are not necessary.
Remove those additional instructions and let the compiler choose the
registers.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We have now clear distinction between platform and hart features.
Modify the boot print messages to print hart specific features in
a string format.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We have now clear distinction between platform and hart features.
Modify the boot print messages to print platform features in a string
format. In the process, this patch moved relatively larger functions
to its own file from platform.h header file.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As per the RISC-V specification, time value can be obtained from a time
CSR implemented in hardware or a MMIO based IP block. Qemu virt machine
already supports timer csr while CLINT provides the timer for other
platforms.
Implement a hart specific timer feature that can be detected at runtime.
As CSR based timer implementation are faster than MMIO address based, it
is always preferred over MMIO based one.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Any platform feature that belongs to a hart, have already been moved to
hart features and are detected at run time. The remaining platform features
are identical to platform default features.
Use the platform default features instead of defining a separate copy of it.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
PMP & performance counters belong to a hart rather than a platform.
In addition to that, these features enable reading/writing from a
particular csr. Thus, they can be detected and set at runtime rather
than compile time.
Move PMP/MCOUNTEREN/SCOUNTEREN features to hart and detect them at runtime.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There may be some features which are hart specific rather than a platform
specific feature. Add a framework to support that.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As per RISC-V ISA, pmp is not mandatory. Currently, we only add reserved
memory node in DT only if PMP is present. That allows supervisor to access
the memory where OpenSBI continue to exist without realizing it for non-pmp
based platforms. It may result in corrupting OpenSBI. That's why OpenSBI
should at least let the supervisor know where it continue to exist.
This a best effort service provided by OpenSBI expecting that supervisor
software is not buggy and properly sets up its memory after parsing the
reserved-memory device tree node.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There may be few common mathematics helper functions which can be used
anywhere in OpenSBI project.
Add a separate math helper function file to add these functions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As RISC-V ISA allows many CSRs such as pmp, s/mcounteren to be optional
in hardware, OpenSBI should provide an option to dynamically detect
these csr access capability at run time.
Implement a csr read/write access check helper macros.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Unprivileged trap handler can be reused for any cases where the executing
code expects a trap.
Rename it to "expected" trap handler as it will be used in other cases in
future.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Doxygen does not support italic text in page title so fix
some of the markdown files accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, all markdown pages are randomly arranged in table of
contents so to fix this we treat top-level README.md as mainpage
and enable Doxygen TREEVIEW.
Also, there should not be any text before title of a markdown
page so we move project copyright as separate section in top-level
README.md.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The generic platform provides IPI and timer functionality based on
DT node provided in the FDT passed by previous booting stage. This
patch updates generic platform documentation about IPI and timer
expectations.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The generic platform will try to select serial console based on the
stdout-path DT property in /chosen DT node hence we document this.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The RISC-V ISA string does not follow alphabetical order. Instead,
we have a RISC-V specific ordering of extensions in the RISC-V ISA
string. This patch improves misa_string() implementation to return
a valid RISC-V ISA string.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The HFENCE VVMA instructions flushes TLB based on the VMID
present in HGATP CSR. To handle this, we get the current
VMID for SBI HFENCE VVMA call and we use this current VMID
to do remote TLB HFENCE VVMA on desired set of HARTs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We don't have page table programming in OpenSBI so let's remove
redundant page table related defines from riscv_encoding.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The OpenSBI generic platform works perfectly fine on the QEMU spike
machine and Spike emulator so let's remove dedicated Spike platform
from OpenSBI.
All Spike platform related documentation in OpenSBI will now suggest
using OpenSBI generic platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The OpenSBI generic platform works perfectly fine on the QEMU virt
machine so let's remove dedicated QEMU virt machine platform from
OpenSBI.
All QEMU virt machine related documentation in OpenSBI will now
suggest using OpenSBI generic platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We need to override the remote TLB flush range limit for SiFive FU540
so we add platform override to achieve this.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that we have generic platform which detects hart count from
DTB, we should print platform hart count at boot time.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add generic FDT based platform support which provides platform
specific functionality based on the FDT passed by previous booting
stage.
By default, the generic FDT platform makes following assumptions:
1. platform FW_TEXT_START is 0x80000000
2. platform features are default
3. platform stack size is default
4. platform has no quirks or work-arounds
The above assumptions (except 1) can be overridden by adding special
platform callbacks which will be called based on the FDT root node
compatible string.
By default, we compile OpenSBI generic platform as follows:
$ make PLATFORM=generic
For a non-standard FW_TEXT_START, we can compile OpenSBI generic
platform as follows:
$ make PLATFORM=generic FW_TEXT_START=<non_standard_text_start>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add optional fw_platform_init() function which will allow
platform specific code to update "struct sbi_platform platform"
before it is used.
The fw_platform_init() can be a regular C function so before
callint it we:
1. zero-out BSS section
2. Setup temporary trap handler to catch bugs
3. Setup temporary stack pointer
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple reset framework which will select and use reset driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple serial framework which will select and use serial driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple irqchip framework which will select and use irqchip driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple ipi framework which will select and use ipi driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple timer framework which will select and use timer driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Getting array size of a dynmaic array can be very handy hence
this patch.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We add fdt_parse_plic_node() function which will allow us to parse
a particular DT node as PLIC node. This will be useful in parsing
the DT node which we have found by matching compatible string.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_max_hart_id() API which return max HART id based
on CPU DT nodes. This will be used by generic FDT based drivers in
subsequent patches.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Parsing HART id from a CPU DT node is a common requirement for
RISC-V systems. The newly added fdt_parse_hart_id() also helps
reduce duplicate code between fdt_cpu_fixup() function and
fdt_parse_hart_count() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We add fdt_parse_sifive_uart_node() function which will allow
us to parse a particular DT node as SiFive UART node. This will
be useful in parsing the node pointed by stdout-path.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_get_node_addr_size() will be useful in FDT based simple
driver frameworks so we make it a public function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds FDT match table based node lookup funcitons.
These functions will be useful in implementing simple FDT
based driver frameworks.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_parse_clint() is quite generic and can be used for other
types of devices so we rename it to fdt_parse_compat_addr().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The clint_ipi_sync() was removed long time back hence we remove
redundant declaration from clint.h
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_uart8250_node() function which will allow us
to parse a particular DT node as UART 8250 node. This will be
useful in parsing the node pointed by stdout-path.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The information parsed by fdt_parse_uart8250() API is not complete.
We need to parse reg-shift and reg-io-width for UART 8520 as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This patch factor-out SiFive test device related stuff into
it's own source file from qemu/virt platform. In future, we
can find SiFive test device address from device tree as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can achieve shutdown, cold reboot, and warm reboot using just
one sbi_platform callback so we combine system_reboot() and
system_shutdown() callbacks into one system_reset() callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The default (usually last) PMP region provides S-mode access to
complete memory range not covered by other PMP regions.
Currently, the default PMP region is described as platform specific
PMP region which is not appropriate because all platforms need it
and default PMP region should be part of generic library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-27 13:57:27 +05:30
403 changed files with 42604 additions and 5958 deletions
@@ -8,7 +8,7 @@ With QEMU v4.2 or above release, the 'sifive_u' machine can be used to test
OpenSBI image built for the real hardware as well.
To build platform specific library and firmwares, provide the
*PLATFORM=sifive/fu540* parameter to the top level `make` command.
*PLATFORM=generic* parameter to the top level `make` command.
Platform Options
----------------
@@ -27,50 +27,28 @@ U-Boot v2020.01 (or higher) should be used.
The HiFive Unleashed device tree(DT) is merged in Linux v5.2 release. This
DT (device tree) is not backward compatible with the DT passed from FSBL.
To use Linux v5.2 (or higher, the pre-built DTB (DT binary) from Linux v5.2
To use Linux v5.2 (or higher), the pre-built DTB (DT binary) from Linux v5.2
(or higher) should be used to build SiFive FU540 OpenSBI binaries by using
the compile time option *FW_PAYLOAD_FDT_PATH*.
the compile time option *FW_FDT_PATH*.
```
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image
make PLATFORM=generic FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image
or
(For Linux v5.2 or higher)
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image FW_PAYLOAD_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel>
make PLATFORM=generic FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image FW_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel>
```
**U-Boot Payload**
The command-line example here assumes that U-Boot was compiled using the
sifive_fu540_defconfig configuration and with U-Boot v2020.01 (or higher).
The detailed U-Boot booting guide is avaialble at [U-Boot].
sifive_fu540_defconfig configuration and with U-Boot v2020.01, and up to
v2021.04. sifive_unleashed_defconfig shall be used with v2021.07 or above.
```
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot-dtb.bin
```
**U-Boot & Linux Kernel as a single payload**
A single monolithic image containing both U-Boot & Linux can also be used if
network boot setup is not available.
1. Create a temporary image with u-boot-dtb.bin as the first payload. The
command-line example here assumes that U-Boot was compiled using
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
