Some of the external firmwares using OpenSBI as library are facing
issues with the weak memcpy() and memset() aliases in libsbi.a so
we move these to fw_base.S. This way mapping of implicit memcpy()
or memset() calls to sbi_memcpy() or sbi_memset() will only be done
for OpenSBI firmwares.
(Refer, https://github.com/riscv-software-src/opensbi/issues/234)
In addition, we also add memmove() and memcmp() mappings in fw_base.S
because as-per the GCC documentation the freestanding environment must
provide memcpy(), memmove(), memset(), and memcmp().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The commit 69d7e53 disables the -m(no-)save-restore option for
clang, but clang11 supports this option. This patch uses the
output information of the compiler to check whether the compiler
supports this option.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When compiling with -Os option along with -ffreestanding, both GCC
and clang will add implicit calls to memcpy() and memset() for stack
variables initialized in declaration.
The C standard as per Clause 4, the compiler cannot necessarily
assume that anything beyond:
* float.h
* iso646.h
* limits.h
* stdalign.h
* stdarg.h
* stdbool.h
* stddef.h
* stdint.h
* stdnoreturn.h
* fenv.h
* math.h
* and the numeric conversion functions of stdlib.h.
This patch maps memcpy() and memset() as weak-alias of sbi_memcpy()
and sbi_memset() respectively so that implicit calls to memcpy()
and memset() will compile properly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
The riscv target of CLANG-10 (or lower) does not support the
-m(no-)save-restore option so we get compile warnings. This patch
fixes compile warning by using -m(no-)save-restore option only
for GCC.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
We should check if SSCOF extension is present,
before applying inhibit mask and clearing overflow,
otherwise undesirable value can be written
in MHPMEVENT_N CSR.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
This commit makes Spike usable as QEMU (in fact, those are based on
QEMU examples).
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
RISC-V privilege specification does not specify how to encode the event ID.
Therefore, each platform is allowed to customize its own encoding rule.
The common encoding methods are as follow, directly assigning a number to an
event, or every bit in the mphmevent CSR controls one specified event or
mixes the above two methods.
To enable OpenSBI to support the above three encoding methods simultaneously,
this patch repurpose the dt property "riscv,raw-event-to-mhpmcounters". The
"riscv,raw-event-to-mhpmcounters" will describes the one or multiple raw
events that could be counted by a set of counters. But, the column number
of "riscv,raw-event-to-mhpmcounters" is extended from 2 to 3. The 1st column
(64bit) is the ID of the raw events. The 2nd column (64bit) represents a
select_mask now to represent the bits used for event ID encoding.
If a platform directly encodes each raw PMU event as a unique ID,
the value of select_mask will be 0xffffffff_ffffffff.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Atish Patra<atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
BUG and BUG_ON are not informative and are rather lazy interfaces, only
telling the user that something went wrong in a given function, but not
what, requiring the user to find the sources corresponding to their
firmware (which may not be available) and figure out how that BUG(_ON)
was hit. Even SBI_ASSERT in its current form, which does include the
condition that triggered it in the output, isn't necessarily very
informative. In some cases, the error may be fixable by the user, but
they need to know the problem in order to have any hope of fixing it.
It's also a nuisance for developers, whose development trees may have
changed significantly since the release in question being used, and so
line numbers can make it harder for them to understand which error case
a user has hit.
This patch introduces a new sbi_panic function which is printf-like,
allowing detailed error messages to be printed to the console. BUG and
BUG_ON are removed, since the former is just a worse form of sbi_panic
and the latter is a worse version of SBI_ASSERT. Finally, SBI_ASSERT is
augmented to take a set of arguments to pass to sbi_panic on failure,
used like so (sbi_boot_print_hart's current error case, which currently
manually calls sbi_printf and sbi_hart_hang):
SBI_ASSERT(xlen >= 1, ("Error %d getting MISA XLEN\n", xlen));
The existing users of BUG are replaced with calls to sbi_panic along
with informative error messages. BUG_ON and SBI_ASSERT were unused (and,
in the case of SBI_ASSERT, remain unused).
Many existing users of sbi_hart_hang should be converted to use either
sbi_panic or SBI_ASSERT after this commit.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
A recent commit (b28f0700) turns to read from CSR_MCOUNTINHIBIT after
checking the SBI_HART_HAS_MCOUNTINHIBIT HART feature, which leaves the
mctr_inhbt uninitialized in pmu_ctr_find_hw().
As a result, compiler will complain:
error: 'mctr_inhbt' may be used uninitialized in this function.
This commit resolves the issue by assigning an initial value to mctr_inhbt.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Add support for the UART provided by the LiteX SoC
framework (https://github.com/enjoy-digital/litex),
based on its FDT info (described in the Linux tree at
Documentation/devicetree/bindings/serial/litex,liteuart.yaml).
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We should clear A bits in prot variable before enabling A_NA4 or A_NAPOT.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
da9063 PMIC can be used to reset/shutdown the
Sifive Unmatched board.
shutdown is done simply by writing SHUTDOWN bit to
DA9063_REG_CONTROL_F register.
reset via setting WAKEUP bit in DA9063_REG_CONTROL_F
register followed by masking POWER and POWER1 domains
and setting STANDBY bit in DA9063_REG_CONTROL_A,
originally discovered by Alexandre Ghiti on linux-riscv
maillists.
Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
We should ensure that pmpcfg0.pmp0cfg is set to zero before using
pmpaddr0 CSR for detecting implemented PMP address bits.
Fixes: bf21632860 ("lib: sbi: Detect PMP granularity and number
of address bits")
Signed-off-by: Vasan VS <vasan.vs@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
As per the DT schema rules, the prefix should be vendor. As the PMU
properties are generic for all vendors, change the prefix to riscv
instead of pmu.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Some platforms such as hifive unmatched doesn't implement mcountinhibit
csr. However, it has hardware events that can be monitored using 2
hpmcounter it has (i.e. mhpmcounter3 & mhpmcounter4).
Currently, PMU extension disabled if mcountinhibit is absent. That's not
really necessary as long as the supervisor OS keeps track of the delta
value of the counters. Without mcountinhibit, the delta value won't be
entirely accurate because the counters are freely running. However, that
should be fine to produce an approximate counter value which can help
performance analysis. Perf sampling won't work though as sscof extension
is not present in hifive unmatched.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The mhpm bits represent the number of bits available in mhpmcounter
while counter width describes a zero indexed value. Fix the counter width
calculation.
Fixes: 13d40f21d5 ("lib: sbi: Add PMU support")
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The hardware solely relies on the event selector value in mhpmevent
to figure out what event to monitor using that counter. It should be
reset when counter reset happens.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
A platform may use programmable counters for cycle/instret events.
The priv spec allows that provided that cycle/instret also report those
events in addition to the programmable counters. We should allow that
functionality in OpenSBI.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
OpenSBI doesn't use any counters for its own usage. Thus, all the counters
can be made accessible for lower privilege mode always. However, the
mcountinhibit must be set so that the counter doesn't increment.
As a result, we don't have to enable/disable mcounteren at every start/stop.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
This patch adds sscofpmf extension in pmu module which includes
following things.
1. Enable overflow irq when starting a counter.
2. Setting the correct event filters passed from supervisor.
3. Delegating the overflow interrupt to the supervisor.
4. Add RV32 support for sscofpmf.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Sscofpmf ISA extension introduces PMU counter overflow and filtering support.
It introduces a read only `scountovf` csr that can be used to detect if
a hart supports this extension at runtime. However, this feature is only
useful if the hart already supports mcounteren and mcountinhibit.
Add a dynamic detection mechanism and boot time print message if sscofpmf
is present.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The Sscofpmf extension introduces mhpmevent[h] csrs to handle filtering
/overflow bits in RV32. There is no way to read/write mcountinhibit
using mcountinhibit csr using a variable.
Updated the support to read/write mhpmevent[h] and mcountinhibit csr.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The initialization of a reset driver may fail for various reasons, like
a PMIC based reset driver not finding the required I2C driver. The return
code of the init routine may take other error values than -ENODEV.
If the initialization of a reset driver fails, this should not lead to the
board hanging. It is enough that the reset driver does not call
sbi_system_reset_add_device() to avoid invoking the driver for a device
that could not be initialized.
Change the return type of fdt_reset_init() to void.
Print a message if an error occurs.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Move the fdt_reset_init() invocation from generic_early_init() to
generic_final_init(). This allows to print error messages.
Ignore the return value of fdt_reset_init() as we should not stop booting
due to failure to initialize reset drivers.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Moving the sbi_boot_print_general() call after the
sbi_platform_final_init() call allows to print devices initialized in the
latter.
To keep the overall print sequence the same also move
sbi_boot_print_domains().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Convert static array to sbi_list.
This removes size limitation, makes add/remove more efficient and
saves space.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The parameter passed to HFENCE.GVMA instruction in rs1 register
is guest physical address right shifted by 2 (i.e. divided by 4).
Unfortunately, we overlooked the semantics of rs1 registers for
HFENCE.GVMA instruction and never right shifted guest physical
address by 2. This issue did not manifest for hypervisors till
now because all H-extension implementations (such as QEMU, Spike,
Rocket Core FPGA, etc) we tried till now were conservatively
flushing everything upon any HFENCE.GVMA instruction.
This patch fixes GPA passed to __sbi_hfence_gvma_vmid_gpa()
and __sbi_hfence_gvma_gpa() functions.
Fixes: 331ff6a162 ("lib: Support stage1 and stage2 tlb flushing")
Reported-by: Ian Huang <ihuang@ventanamicro.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
This simply adds an helper to get fdt address which is more explicit than
sbi_scratch_thishart_arg1_ptr.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Although we have PRILX to help us print unsigned long without
considering the 32bit/64bit differences, there are still some
places using 08lx and 016lx manually --- leading to redundant code.
This commit fixes the issue by using PRILX all the time.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Now that sbi_system support multiple system reset devices, we should
register separate devices for GPIO restart and GPIO poweroff because
DT describes these as separate devices with different compatible
strings.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
The T-HEAD PLIC implementation requires setting a delegation bit
to allow access from S-mode. Now that the T-HEAD PLIC has its own
compatible string, set this bit automatically from the PLIC driver,
instead of reaching into the PLIC's MMIO space from another driver.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When we are doing opensbi development, we want to know the build time
and compiler info for debug purpose.
To enable this message, please add "BUILD_INFO=y", like:
```
make BUILD_INFO=y
```
NOTE: Using `BUILD_INFO=y` without specifying SOURCE_DATE_EPOCH will
violate "reproducible builds". So it's ONLY for development and debug
purpose, and should NOT be used in a product which follows "reproducible
builds".
Signed-off-by: Wei Fu <wefu@redhat.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The SBI specification requires that sbi_system_reset() returns
SBI_ERR_INVALID_PARAM if reset_type or reset_reason are not valid.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Instead of saving context only for default non-retentive suspend,
we should save context for all non-retentive suspend types.
Fixes: 74756891cc ("lib: sbi: Implement SBI HSM suspend function")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Let's make system_reset_check returning priority instead of only
true/false. In that case 0 - means not supported, and anything above
means priority that makes existing reset handlers being used in first
place, unless it is decided to lower their priority.
The handler with the most priority wins.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
To support different handlers for different types of resets, we are
adding a sbi_list of restart handlers.
Instead of sbi_system_reset_set_device we use
sbi_system_reset_add_device to reflect the actual meaning.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The GPIO reset driver supports reset and poweroff. But not all boards
support both. gpio_system_reset_check() must detect this situation.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We should use sbi_timer_mdelay() instead of custom gpio_mdelay() in
the gpio reset driver.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We now have frequency of the timer device provided by the platform
support so we can emulate desired delay using a loop where the number
loop iterations are based on timer frequency.
This patch provides sbi_timer_delay_loop() for above purpose.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We now have frequency in timer device instance provided by platform
so let's print timer frequency as part of the boot prints.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Generic mdelay() and udelay() functions can be provided by the
sbi_timer framework if timer frequency is available in the timer
instance provided by the platform support or timer driver.
This patch adds timer frequency (timer_freq) member in the
struct sbi_timer_device for above purpose.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add fdt_parse_timebase_frequency() function which can be used
by ACLINT mtimer driver and platform code to get timebase frequency.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We use BUG() macro in csr_read_num(), csr_write_num(), and
misa_string() functions for unhandled cases.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Three macros are added. One is called BUG, which is used to put in an
unreachable branch. One is called BUG_ON, which is used to check bugs
and assert conditions are opposite. One is called SBI_ASSERT, used for
assertion checking.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The original version of ctz will cause an endless loop, if the parameter
passed in is 0. This commit fixes this bug.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
One of the watchdogs in the D1 SoC provides a "soft reset" function,
which allows software to immediately reset the entire SoC. Add a driver
so it can implement the SBI system reset function.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
In preparation for adding a new fdt_reset driver, ensure the existing
lists are sorted alphabetically.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
sbi_platform_get_features_str() uses sbi_snprintf() to construct the
features_str. However, it passes the wrong length value (i.e., the nfstr),
which should be (nfstr-offset) as the starting point of str (i.e.,
features_str + offset) changes.
This commit also checks the return value of snprintf, and handles the
corner case that the string buffer is full.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
As other exported fifo functions, we should check whether the fifo is
valid in sbi_fifo_is_empty and sbi_fifo_is_full. To this end, this patch
changes the retval from bool to int, and the two functions will return
SBI_EINVAL in the case the fifo is invalid.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Avoid getting messages from multiple harts (using dprintf and printf)
concurrently with a spinlock serializaing calls to sbi_dprintf(),
sbi_printf() and sbi_puts()
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
It can be useful to make SBI v0.2 or newer ecalls from this payload
for testing purposes. To support this, convert the macros to use the
extension/function parameter convention.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
commit 764a17d852 ("lib: sbi: Implement firmware counters") added
switch cases for CAUSE_LOAD_ACCESS and CAUSE_STORE_ACCESS. This caused
them to stop being redirected to U or S mode, as that is handled in the
default switch case. As a result, an error in userspace could cause the
system to hang. Fix this by allowing the acces fault case to fall
through to the default case.
Fixes: 764a17d852 ("lib: sbi: Implement firmware counters")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
In sbi_ecall_rfence_handler, it will compare the funcid with
REMOTE_HFENCE_GVMA and REMOTE_HFENCE_VVMA_ASID. Later it check
whether the misa includes H-extension. This checking is incomplete
which misses REMOTE_HFENCE_GVMA_VMID and REMOTE_HFENCE_VVMA.
Fix the issue by updating the checking range.
Signed-off-by: Dong Du <Dd_nirvana@sjtu.edu.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We simplify MTIMER synchronization as follows:
1) Detect MTIMER devices with unique (or non-shared) MTIME
register at boot-time
2) Select first MTIMER device with no associated HART as our
reference MTIMER device
3) Only synchronize MTIMER devices with unique (or non-shared)
MTIME register using reference MTIMER device
4) Directly update the MTIME register at time of synchronization
because MTIME is a read/write register.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have ACLINT MTIMER devices which only support 32-bit MMIO
accesses on RV64 system so this patch adds a boolean DT property
"mtimer,no-64bit-mmio" to detect this from MTIMER DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_parse_aclint_node() is used to parse DT node for SiFive
CLINT, ACLINT MTIMER, and ACLINT MSWI devices.
The ACLINT MTIMER has undergone following changes:
1) MTIMER DT node now requires separate addresses in for MTIME
register and MTIMECMPx registers in the reg DT property.
2) MTIMER DT node might have no interrupts-extended DT property
when the MTIMER device has no associated HARTs (i.e. the
MTIMER device has no MTIMECMPx registers)
This patch extends fdt_parse_aclint_node() to handle above
mentioned changes in ACLINT MTIMER DT bindings.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add "index" parameter to fdt_get_node_addr_size() API so that
calling function can specify index of desired register set. This
will allow fdt_get_node_addr_size() to handle DT nodes with
multiple register sets.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend the ACLINT library to support separate base addresses
for MTIME and MTIMECMP registers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The maximum address and size encoded in DT are 64-bit numbers, so we
should use uint64_t for 'addr' and 'size' in fdt_get_node_addr_size().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The generic GPIO reset driver has two entries in the match table:
"gpio-poweroff", "gpio-reset". Only the first entry is considered by
fdt_reset_init().
Define "gpio-poweroff" and "gpio-reset" as compatibility strings of two
separate reset drivers. They still can share code.
Fixes: e3d6919d10 ("lib: utils/reset: Add generic GPIO reset driver")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The previous code uses _start as the load address, this default .entry is
the first segment, using _fw_start does not need to make this assumption.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When generating code with -mno-relax, GCC puts .option norelax in
the generated assembly, and so doesn’t bother passing on -mno-relax
to the assembler. This has the unfortunate effect that, when using
GCC to assemble hand-written assembly, -mno-relax does nothing,
and we have to pass -Wa,-mno-relax to manually forward it to the
assembler.
This is an old GCC bug that was fixed [1] recently. For the time
being, let's pass "-Wa,-mno-relax" to ASFLAGS for the GCC + LLD
combination to work, e.g.:
$ make CC=riscv64-unknown-elf-gcc LLVM=1 PLATFORM=generic
[1] 3b0a7d624e
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Recent FW_PIC=y changes actually require toolchains with PIE support
and it is on by default. Existing doc uses a GNU bare-metal toolchain
as examples but it does not support PIE.
Replace references of bare-metal toolchain prefix with Linux toolchain
prefix everywhere in documentation.
Also indicate that "riscv64-unknown-freebsd-" as an alternative to
"riscv64-linux-" GNU toolchain.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
FW_PIC=y is on by default, but the doc is missing when this was
introduced. Add some description for it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This updates documentation to describe parameters passed to firmware
from previous booting stage, and corresponding address alignment
requirement.
This also fixes a typo in fw_dynamic.md (it's => its).
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
If the device tree is at an address that is not __SIZEOF_POINTER__
aligned, the fdt relocation code tries to align both source and
destination address to __SIZEOF_POINTER__ before the memory copy.
But such alignment can lead to unexpected results if either source
or destination address is not aligned.
In fact libfdt requires that the device tree must be at an 8-byte
aligned address. Hence remove the unhelpful alignment codes.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The fields are of type unsigned long and are not pointers. While this
happens to be the same for RV32/RV64, it is not correct when compiling
for a CHERI-RISC-V system where pointers are twice the size of long.
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We add generic GPIO reset driver inspired from gpio-restart
and gpio-poweroff drivers of Linux kernel.
Signed-off-by: Green Wan <green.wan@sifive.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add a minimal SiFive GPIO driver so that we can do GPIO based
system power-off and reset.
Signed-off-by: Green Wan <green.wan@sifive.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add a simple FDT based GPIO framework which is built on top
of generic GPIO library. The phandle of FDT GPIO chip DT node
is treated as unique GPIO chip ID required by the generic GPIO
library. The FDT based GPIO chip drivers will be probed on-demand
from fdt_gpio_pin_get() called by the GPIO client drivers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add generic GPIO configuration library which is independent of
hardware description format (FDT or ACPI). The OpenSBI platform
support or GPIO drivers can register GPIO chip instances which
can be discovered and used by different GPIO clients. Each GPIO
chip instance has a unique ID which can be used by GPIO clients
to lookup GPIO chip instance.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The libfdt project does not have a generic API to parse phandle
with args from a DT node so we add fdt_parse_phandle_with_args()
for this purpose. This new API will be useful to FDT based drivers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We only need libgcc for 64-bit division on RV32. Whilst GCC toolchains
bundle libgcc, Clang toolchains tend not to ship libclang_rt.builtins
given every compiler is a cross-compiler for every target and so you
would need a silly number of builds of it, with only the native library
available; only vendor-provided Clang toolchains specifically for bare
metal cross-compiling are likely to provide it.
Thus, import part of FreeBSD's implementation of the division support
functions needed and stop linking against libgcc.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Anup Patel <anup.patel@wdc.com>
This is intended to mirror the Linux kernel. Building with CC=clang will
use Clang as the compiler but default to using the existing binutils.
Building with LLVM=1 will default to using Clang and LLVM binutils.
Whilst GCC will accept the -N linker option and forward it on to the
linker, Clang will not, and so in order to support both compilers we
must use -Wl, to forward it to the linker as is required for most other
linker options.
Note that there is currently a bug when using Clang as the compiler and
riscv64-linux-gnu-ld as the linker for FW_PIC=y. At first glance this
appears to be a bug in GNU binutils, but this could also be Clang or
OpenSBI at fault in some subtle way. Thus, for now, advise that this
combination be avoided.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Anup Patel <anup.patel@wdc.com>
Bare-metal GNU ld does not support PIE, so if using it this will result
in a failure to build. Instead, default to FW_PIC=n if not supported.
Note that an explicit FW_PIC=y is not overridden, to ensure the build
fails rather than silently producing a position-dependent binary.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When using Clang with a bare-metal triple, -pie does not get passed to
the linker as it's not normally a thing that makes sense, unlike GCC
which will unconditionally forward it on and potentially result in a
linker error. However, LLD does support it, and manually forwarding it
on works as desired, so do so to fully support FW_PIC with Clang and
LLD.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The -N linker option is supposed to make .text writable, but GNU ld and
LLD differ in interpreting what that means. GNU ld will happily let you
have relocations in it, but LLD will see that the input section is
read-only (even though the output section is writable) and give an
error. It's unclear if either of them intend to have that behaviour in
this edge case, but regardless there's no reason not to just put the
data in a writable .data section.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
These are mutually exclusive. GNU as and LLVM both let later binding
directives override earlier ones so this works as intended, but LLVM 12
turned this into a warning as there's no good reason to do such a thing
and could be a potential bug. Thus, remove the redundant and incorrect
.globl directive for fw_platform_init.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The sbi_pmu_exit() crashes on systems not having MCOUNTINHIBIT csr
so to fix this we check SBI_HART_HAS_MCOUNTINHIBIT feature in
sbi_pmu_exit() and do nothing if it is not available.
Fixes: 13d40f21d5 ("lib: sbi: Add PMU support")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Avoid using a magic number, instead use a macro for the version of
struct fw_dynamic_info.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The sanity checks on the magic and version was already done in
fw_boot_hart(), which happens before fw_save_info() is called.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
At present in the rendered platform guide, all instances of <xyz>
are missing. Use < and > to replace <> to make them visible.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Before entering _scratch_init(), register t3 already holds a copy
of the firmware end address, hence there is no need to calculate
it again. This reduces 3 instructions in each _scratch_init() loop.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Add PMU support for generic platform. Generic platform solely relies on
the device tree to parse all pmu related information. If any event is
not described in device tree, generic platform will not support it.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Follow the standard conventon for static function names:
All global functions should be start with sbi_<module name>_
All static functions should be start with <module name>_
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V SBI v0.3 specification defines a set of firmware events that can
provide additional information about the current firmware context. All
of the firmware event monitoring are enabled now. The firmware
events must be defined as raw perf event with MSB set as specified in the
specification.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V SBI specfication 0.3 defines a PMU extension that allows supervisor
mode to start/stop/configure pmu related events. This patch implements
all of the functionality defined in the specification.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The PMU DT node bindings are defined in docs/pmu_support.md
Add few fdt helper functions to parse the DT node and update the
event-counter mapping tables.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V SBI v0.3 specification defined a PMU extension to configure/start/stop
the hardware/firmware pmu events.
Implement PMU support in OpenSBI library. The implementation is agnostic of
event to counter mapping & mhpmevent value configuration. That means, it
expects platform hooks will be used to set up the mapping and provide
the mhpmevent value at runtime.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
A platform hook to initialize PMU allows platform vendors to provide
their own mechanism to define pmu event-counter mappings in addition
to the DT based approach.
Another platform hook that allows platform vendors customize the
final mhpmevent value configuration.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Currently, csr_read/write_num functions are used to read/write PMP related
CSRs where CSR value is decided at runtime. Expand this function to include
PMU related CSRs as well.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Currently, all bits in mcountern are enabled unconditionally at boot time.
With SBI PMU extension, all the programmable counters should enabled only
during performance monitoring for a particular event. However, this is done
only if mcountinhibit is implemented because the supervisor mode can not
start/stop any event without mcountinhibit.
Similarly, supervisor should take care enabling scounteren which allows
U-mode to access programmable pmu counters. All the non-programmable ones
(CY, TM, IR) should be enabled in M-mode because some userspace may rely on
builtins such as __builtin_readcyclecounter. Supervisor OS can still disable
them during initial configuration.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V privilege specification allows the implementation to have less
than 64 bits.
Add a function to detect the number of implemented bits in mhpmcounter
dynamically at runtime.
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V ISA specification v1.11 defined mcountinhibit CSR that allows
software to stop any counter from incrementing. The SBI PMU extension
depends on this CSR support in hardware.
Define mcountinhibit as a hart specific feature and detect it at runtime.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
SBI PMU extension requires a firmware to be aware of the event to
counter/mhpmevent mappings supported by the hardware. One approach
is to encode that information in the device tree.
Define a device tree binding that allows a hardware to describe
all the PMU mappings required in concise format.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
fw_platform_init() fills platform.name without considering the
ending null character. Fix it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
FW_PIC is on by default. Hence no need to explicitly require it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Unify all the file and function names of 'sifive_test' device, to use
the same prefix. This is also a preparatory patch for upcoming sifive
reset device.
Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The ACLINT devices are backward compatible with SiFive CLINT
so we replace all CLINT library usage in various platforms
with ACLINT library. As a result of this replacement, the
CLINT library is not used by any part of OpenSBI hence we
remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add a new FDT based ACLINT MTIMER driver which works for
both CLINT device and standalone ACLINT MTIMER device.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add a new FDT based ACLINT MSWI IPI driver which works for both
CLINT device and standalone ACLINT MSWI device.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add fdt_parse_aclint_node() which can parse both ACLINT and
CLINT DT nodes. This means fdt_parse_clint_node() is not required
anymore so we remove it as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add common ACLINT MSWI library similar to the CLINT library
so that OpenSBI platforms can use it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add common ACLINT MTIMER library similar to the CLINT library
so that OpenSBI platforms can use it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Don't assign an unused value to variable index.
Use operator '-=' where applicable.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Compiling wake_coldboot_harts() with GCC 11 and -Wextra yields:
lib/sbi/sbi_init.c:208:27:
error: comparison of integer expressions of different signedness:
‘int’ and ‘u32’ {aka ‘unsigned int’} [-Werror=sign-compare]
208 | for (int i = 0; i <= sbi_scratch_last_hartid(); i++) {
| ^~
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Compiling sbi_tlb_entry_process() with GCC 11 and -Wextra yields:
lib/sbi/sbi_tlb.c: In function ‘sbi_tlb_process_count’:
lib/sbi/sbi_tlb.c:206:31:
error: comparison of integer expressions of different signedness:
‘u32’ {aka ‘unsigned int’} and ‘int’ [-Werror=sign-compare]
206 | if (deq_count > count)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Current, GET_F64_REG() macro does not generate correct inline
assembly for the RV32 systems. This patch provides separate
definitions of GET_F64_REG() macro for RV32 and RV64 systems.
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
If property csr-copy does not exist, fdt_getprop() will return NULL and cnt
will have a random value from the stack.
Call clone_csrs() only if cnt is initialized to a non-zero value.
Fixes: 49e422c5ad ("lib: utils: reset: Add T-HEAD sample platform reset driver")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
In sbi_scratch_init() we determine the last hart. The index of the last
hart cannot exceed SBI_HARTMASK_MAX_BITS - 1. We should not initialize
last_hartid_having_scratch to a higher number to avoid buffer overflows
when using this value before calling sbi_scratch_init().
When allocating scratch memory in sbi_scratch_alloc_offset() we zero out
the allocated memory for all harts except for the last one. We should not
skip the last hart.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
plicsw_ipi_sync() is a forward declaration but without the actual
implementation. Drop it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Fix several places in the docmentation that are missing spaces.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
- %s/CLINT/PLICSW
- replace '.' with a space
- add a space around * in plicsw_cold_ipi_init()
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The parameter owner of function sbi_scratch_alloc_offset() is never used.
The scratch memory is small. We should not use it for debug information in
future. Hence eliminate the parameter.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The value of the /chosen/stdout-path devicetree property is used to
determine the UART used by openSBI. According to the devicetree
specification the value may contain a hyphen, e.g.
chosen {
stdout-path = "/serial@f00:115200";
};
If the character ':' is present, it terminates the path of the device.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should try other FDT drivers when we see SBI_ENODEV returned
by cold_init() of FDT driver.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We can merge region B onto region A only if base of region A is
aligned to region A order + 1.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Use strncmp() instead of strcmp() in __fixup_find_domain_offset()
so that it compiles fine when linking with external firmware (such
as EDK2).
Signed-off-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Synopsys DesignWare APB UART is seen on the StarFive JH7100 SoC.
Its programming interface is compatible with the existing 8250
UART driver. Simply add its compatible string to the driver makes
it work with the StarFive JH7100 SoC on a BeagleV board.
With this patch, the generic platform firmware can be used out of
the box on the BeagleV board.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
spin_lock_check already returned bool in the source file but not in the
header. With some toolchains that causes an error, as it should.
Because it and related functions all essentially return a bool, we can
use this opportunity to change them.
Signed-off-by: Daniel Schaefer <git@danielschaefer.me>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Now that SiFive HiFive Unleashed board is using the generic platform
support in OpenSBI, let's remove the old non-generic one.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The upstream U-Boot/QEMU have been using generic platform for SiFive
HiFive Unleashed board for some time. Let's document sifive_fu540 as
one of the supported targets for "generic" platform.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch adds support for the UART used by the NOEL-V processor.
Cobham Gaisler's NOEL-V RISC-V processor IP is available under GPL
and commercial license and is described in more detail at
https://www.gaisler.com/noelv.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
With latest U-Boot upstream (v2021.07 in development), the defconfig
name has been changed to sifive_unleashed_defconfig. Update the doc.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We extend the boot-time prints to show various devices provided
(or registered) by the platform support. This will help users
verify hardware devices available for OpenSBI firmwares.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having hsm_start(), hsm_stop() and hsm_suspend()
callbacks in platform operations, it will be much simpler for
HSM driver to directly register these operations as a device
to the sbi_hsm implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having system_reset_check() and system_reset() callbacks
in platform operations, it will be much simpler for reset driver to
directly register these operations as a device to the sbi_system
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having ipi_send() and ipi_clear() callbacks in
platform operations, it will be much simpler for ipi driver
to directly register these operations as a device to sbi_ipi
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having timer_value(), timer_event_start(), and
timer_event_stop() callbacks in platform operations, it will
be much simpler for timer driver to directly register these
operations as device to the sbi_timer implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having console_putc() and console_getc() callbacks in
platform operations, it will be much simpler for console driver to
directly register these operations as device to the sbi_console
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We now have sbi_domain_root_add_memregion() which allows platform
support to add root domain regions at boot-time so let's remove
the domains_root_regions() platform callback which was added
for this purpose.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We could use platform/generic instead, and won't use
platform/thead/c910 again.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Let's have FW_PIC enabled by default so that OpenSBI firmware
can by default run from any physical address.
Tested with qemu_rv32 & rv64, T-HEAD all hardwares.
Suggested-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Tested-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We should decrement root_memregs_count by one after merging two
memregions otherwise new memregion added after a merge will be
appended after last sentinel memregion of zero order.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Figure out CLINT has_64bit_mmio from DT node and using antonym for
compatibility.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The sbi_domain_memregion_initfw() is no longer used outside
sbi_domain.c so let's make it a local function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We should copy over all restricted memregions from the root domain
to the domains populated from FDT. These restricted root memregions
are typically firmware memregion and M-mode only mmio memregions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We make the the root domain instance global variable so that
platform support and drivers can iterate over the root domain
regions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The CLINT memory should not be accessed by the supervisor-mode
software so let's protect it by adding CLINT memregion to the
root domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We should allow platform support to add more root memory regions
before domains are finalized. This will help platform support to
protect critical M-mode only resources.
This patch adds sbi_domain_root_add_memregion() API for above
described purpose.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds sbi_domain_memregion_init() helper API which can
be used by platform support to initialize a domain memory region
before adding it to the root domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The domains are boot-time system-level partitions so we should
allow platform support to register domains only before hart
domain assignments are finalized.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Updates link in platforms documentation to point to the correct
OpenPiton document.
Signed-off-by: hasheddan <georgedanielmangum@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The unsigned length may be 4 bytes or 8 bytes, amoadd.w only applies
to 4 bytes hence this patch.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Replace the test-and-set spinlock implementation with ticket locks
in order to get fairness (in form of FIFO order).
The implementation uses a 32-bit wide struct, which consists of
two 16-bit counters (owner and next). This is inspired by similar
spinlock implementations on other architectures.
This allows that the code works for both, RV32 and RV64.
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The current implementation of SPIN_LOCK_INIT() provides the spinlock
to be initialized as reference. This does not allow a direct
initialization of the spinlock object at the creation site.
Let's pass the spinlock directly instead (like Linux does as well)
and adjust all users of the macro (in fact there is only one user).
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The __aligned(x) macro is a common wrapper around compiler's
aligned attribute, which allow to define the minimum alignement
of a data type. Let's add this macro.
Signed-off-by: Christoph Muellner <cmuellner@linux.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The "add sp, a0, zero" instruction in the trap restore path is redundant
and can be avoided if TRAP_RESTORE_xyz() assembly macros use a0 as the
base register instead of sp.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
csr_read_allowed/csr_read_allowed requires trap.case to detect the results,
but if no exception occurs, the value of trap.case will remain unchanged,
which makes the detection results unreliable. Add code to initialize
trap.case to 0.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There are two copies of the same abnormal exit code, this patch deletes one
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Current fdt_plic_fixup() only does necessary fix-up against the legacy
"riscv,plic0" node. The upstream Linux kernel defines its official DT
bindings which uses "sifive,plic-1.0.0" as the compatible string and
we should check that first, and if not present fall back to legacy.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
At present fdt_plic_fixup() accepts a 'compat' parameter for PLIC
compatible string. In preparation to support the new DT bindings,
drop this and use "riscv,plic0" directly in fdt_plic_fixup().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings")
adds the official DT bindings for CLINT, which uses "sifive,clint0"
as the compatible string. "riscv,clint0" is now legacy and has to
be kept for backward compatibility of legacy systems.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
GCC has already a predefined macro __ASSEMBLER__ therefore, it can be
used without the need to define a new flag with -D__ASSEMBLY__.
This is useful when adding the library to projects having a build
system such one can build without the need to make changes.
THe build system does not use the Makefile in the sources tree.
Signed-off-by: Marouene Boubakri <marouene.boubakri@nxp.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The trap handler sbi_emulate_csr_read() invokes hpm_allowed() which reads
CSR 0x306 (mcounteren). The K210 does not support CSR 0x306. While trying
to handle a trap occurring in S-mode code this creates an additional trap
in M-mode. This results in failure to redirect to S-mode and the system
hanging in sbi_hart_hang().
In hart_detect_features() we have already determined if CSR 0x306 is
available and stored that information in the scratch area. We can use this
information to decide if CSR 0x306 shall be accessed in hpm_allowed() and
thus avoid the M-mode trap.
Likewise if CSR scounteren is not available we have to avoid reading CSR
0x106.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Enable OpenSBI to support position independent execution. Because the
position independent code will cause an additional GOT reference when
accessing the global variables, it will reduce performance a bit. Therefore,
the position independent execution is disabled by default. Users can
through specifying "FW_PIC=y" on the make command to enable this feature.
In theory, after enabling position-independent execution, the OpenSBI
can run at arbitrary address with appropriate alignment. Therefore, the
original relocation mechanism will be skipped. In other words, OpenSBI will
directly run at the load address without any code movement.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When OpenSBI is compiled as fPIE mode, the assembler will translate "la"
to GOT reference pattern. It will cause to cost an additional load
instruction when obtaining the symbol address. However, if the symbol
locates within the positive or negative 2GB region, we can use "lla"
instead of "la" to avoid unneeded GOT references. This patch assumes that
the OpenSBI image excluding the payload does not exceed 2GB. Based on
this assumption, all "la" instructions are replaced by "lla" to avoid
performance degradation when compiling as fPIE mode.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The SBI function IDs for RFENCE extension must match the SBI specification.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_platform_ipi_clear() called from wait_for_coldboot() and
sbi_hsm_hart_wait() is redundant because IPI will be automatically
cleared by sbi_platform_ipi_init() called from sbi_ipi_init().
Further, wait_for_coldboot() is common for warm startup and warm
resume path so the sbi_platform_ipi_clear() called in warm resume
path cause resuming HART to miss an IPI injected other HART to
wakeup the HART.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The OpenSBI SBI implementation is now compliant with latest draft
SBI v0.3 specification so let's upgrade SBI implementation version.
This will also help HSM suspend function detection in S-mode because
HSM suspend function is only present when HSM extension is present
and SBI implementation version is 0.3 (or higher).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch implements the SBI HSM suspend function. Using this
new SBI call, the S-mode software can put calling HART in platform
specific suspend (i.e. low-power) state. For a successful retentive
suspend, the SBI call will return without errors upon resuming
whereas for a successful non-retentive suspend, the SBI call will
resume from a user provided resume address.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add hart_suspend() callback in platform operations which will
be used by HSM implementation to enter retentive or non-retentive
suspend state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add sbi_hart_reinit() function which will re-initialize HART CSRs
assuming HART features are already detected. This new function will
be useful in re-initializing HART after it resumes from HSM SUSPENDED
state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hsm_hart_start() and sbi_hsm_hart_stop() functions should
only return error codes as defined by the SBI specification.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hsm_hart_started() function is only used by sbi_hsm_hart_stop()
for checking state of calling HART and current domain assignment.
The atomic_cmpxchg() called by sbi_hsm_hart_stop() will check state of
calling hart anyway and domain assignment can be checked by other domain
function such as sbi_domain_is_assigned_hart().
This means sbi_hsm_hart_started() is redundant and can be removed.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
A hart can take interrupt in the new HSM states introduced by the
SBI HSM suspend function (such as SUSPENDED state) so we rename
sbi_hsm_hart_started_mask() to something more generic such as
sbi_hsm_hart_interruptible_mask().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We replace the use of SBI_STATE_xyz defines with SBI_HSM_STATE_xyz
defines because the HSM state defines are complete enough to implement
HSM state machine in OpenSBI. As a result of this, we can now remove
sbi_hsm_hart_state_to_status() function because it is now redundant
and sbi_hsm_hart_get_state() can directly return HSM state or error.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We simplify HSM state define names so that these defines can directly
replace SBI_HART_xyz defines used by SBI HSM implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Implement rebooting the K210 via the system reset extension.
All reset types are treated in the same way.
A request for shutdown results in a reboot.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This clint driver init functions were incorrectly used in
template platform which resulted in compile error. This patch
fixes clint driver function usage in template platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We don't need to pack struct sbi_platform and sbi_platform_operations
because GCC ensures member offsets match member data type irrespective
to the target system (RV32 or RV64). This also allows GCC to generate
more optimized instruction sequence when accessing members of struct
sbi_platform and struct sbi_platform_operations.
Reported-by: Paul Campbell <taniwha@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
All members in struct sbi_scrach are of machine word size so no need
to pack this structure. This also allows GCC to generate more optimized
instruction sequence when accessing members of struct sbi_scratch.
Reported-by: Paul Campbell <taniwha@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
All members in struct sbi_trap_regs are of machine word size so
no need to pack this structure. This also allows GCC to generate
more optimized instruction sequence when accessing members of
struct sbi_trap_regs.
Reported-by: Paul Campbell <taniwha@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the root domain memory regions are fixed in generic
code but some of the platforms may want to explicitly define
memory regions for the root domain.
This patch adds optional domains_root_regions() platform callback
which platforms can use to provide platform specific root domain
memory regions. Due to this changes, the root domain should also
undergo all sanity checks (just like regular domain) so we use
sbi_domain_register() to register root domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Fix uart_putc implementation.
Due to a bug in the IP, this went unnoticed.
Use macros instead of magic numbers to make the code
more readable.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently, we have fixed TLB flush types supported by the
remote TLB library. This approach is not flexible and does
not allow custom local TLB flush function. For example,
after updating PMP entries on a set of HARTs at runtime,
we have to flush TLB on these HARTs as well.
To support custom local TLB flush function, we replace the
"type" field of "struct sbi_tlb_info" with a local TLB flush
function pointer. We also provide definitions of standard TLB
flush operations (such as fence_i, sfence.vma, hfence.vvma,
hfence.gvma, etc).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We introduce sbi_trap_exit() API which can help non-firmware
(i.e. generic or platform) code to force exit trap/interrupt
handling and resume execution at context pointed by parameter
"const struct sbi_trap_regs *regs".
This new sbi_trap_exit() API will help Keystone Enclave project
to resume execution of enclave from custom SBI call handler.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We had added args pointer in ecall handler to ensure that ecall
handler only implements functionality and does not deal with
SBI calling convention. This also helped us to keep SBI calling
convention related code in one place at sbi_ecall_handler().
The Keystone Enclavce project needs access to the trap regsiters
in their ecall handler so that they can context switch enclaves
in custom SBI calls. To help the Keystone Enclave project, we
replace the args pointer in ecall handler parameter with a const
pointer to trap registers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The misaligned load emulation does not sign-extend values correctly
due to missing sign typecast in value passed to the SET_RD() macro.
A very easy way to reproduce this issue is to load 16-bit value
0xff1e from a byte aligned address using LH instruction on hardware
lacking misaligned load/store.
This patch fixes sbi_misaligned_load_handler() for above issue.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The domain_get() platform callback function is now redundant
because fdt_domain_populate() register new domain explicitly
using the sbi_domain_register() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_domain_get() function is now redundant because the
fdt_domains_populate() function can explicitly register new
domains using the sbi_domain_register() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add sbi_domain_register() function to help platform code register
a new domain explicitly instead of depending on domain_get() platform
callback. This function will eventually help us completely remove the
domain_get() platform callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend fdt_iterate_each_domain() and fdt_iterate_each_memregion()
functions to allow underlying iteration function to fail. This will
help us catch more domain misconfiguration issues at boot time.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The generic platform should populate domains from FDT using the
domain FDT helper routines.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add various helper routines to populate domains, iterate domains,
iterate domain memregions, and parse HART to domain assignment from
the FDT.
These helper routines can be used by platform support code and FDT
fixup code.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch adds domain device tree binding documentation in the
OpenSBI domain support documentation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We introduce domains_init() platform operation which can be used by
platform support to initialize/populate domains in the coldboot path.
The domains_init() is called late in the coldboot sequence from the
sbi_domain_finalize() so sbi_printf() can be used by platform support
to print errors/warnings at time of populating domains.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add error prints in sbi_domain_finalize() and sanitize_domain()
to help debug domain configuration issues.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
If coldboot HART is assigned to a domain then we should use coldboot
HART as the boot HART of the domain. This allows coldboot HART to
continue boot sequence even when it is assigned to some non-root domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should use lower bits for domain memory region access permissions
and higher bits for other domain memory region attributes. This helps
us use same bit assignment for parsing domain memory region access
permissions from device tree.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_domain_finalize() should auto start a domain only if the
boot HART is withing limits (i.e. less than SBI_HARTMASK_MAX_BITS).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The domain_count check in sbi_domain_finalize() for newly discovered
domain is incorrect and should be reversed.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
There has been typo in automatic domain boot hart startup
for non-root domains so this patch fixes it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should check and access N-extension CSRs in sbi_hart_switch_mode()
when next_mode is u-mode because N-extension is optional.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
On RV32 systems, we have two CSRs for M-mode status (MSTATUS and
MSTATUSH) when H-extension is implemented. This means we have to
save/restore MSTATUSH for RV32 systems only when H-extension is
implemented. The current _trap_handler() has extra instructions
(roughly 10) for conditional save/restore of MSTATUSH CSR.
These extra instructions in RV32 _trap_handler() can be avoided
if we create separate low-level trap handler for RV32 systems
having H-extension. This patch optimizes low-level trap handler
for RV32 systems accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The SBI SRST extension has been accepted and merged in the latest
SBI v0.3-draft specification.
(Refer, https://github.com/riscv/riscv-sbi-doc)
It allows to S-mode software to request system shutdown, cold reboot,
and warm reboot.
This patch implements SBI SRST extension as a replacement of the
legacy sbi_shutdown() call of SBI v0.1 specification.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
To implement the SBI SRST extension, we need two platform operations
for system reset:
1) system_reset_check() - This operation will check whether given
reset type and reason are supported by the platform
2) system_reset() - This operation will do the actual platform
system reset and it will not return if reset type and reason
are supported by the platform
This patch updates system reset related code everywhere as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Few platforms have dummy system reset functions so let's remove
these dummy system reset functions to allow generic code deal
with it in the right way.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can now use the standard SBI SRST extension reset types instead
of the opensbi specific (SBI_PLATFORM_RESET_xyz) reset types hence
remove related opensbi specific defines. The "platform_" prefix of
the reset type parameter of sbi_system_reset() function should also
be removed.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend the SBI ecall interface header for the SBI SRST extension
recently accepted in SBI specification v0.3-draft.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, we have all boot prints at the end of cold boot sequence
which means if there is any failure in cold boot sequence before
boot prints then we don't get any print.
This patch improves boot prints in cold boot sequence as follows:
1. We divide the boot prints into multiple parts and print it
from different locations after sbi_console_init()
2. We throw an error print if there is any failure in cold boot
sequence after sbi_console_init()
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When PLATFORM_RISCV_ABI and PLATFORM_RISCV_ISA are not specified,
we force "-mabi=lp64 -march=rv64gc" for RV64 and force "-mabi=ilp32
-march=rv32gc" for RV32. This can prevent users from using the
toolchain default "-mabi" and "-march" options.
To allow using toolchain defaults, we add compile-time option
PLATFORM_RISCV_TOOLCHAIN_DEFAULT which when enabled forces the
top-level makefile to use toolchain default ABI and ISA string.
To enable the option, pass "PLATFORM_RISCV_TOOLCHAIN_DEFAULT=1"
to top-level make.
Reported-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We know about pmp granularity and number of bits supported by PMP.
Show those information in the boot time info print
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As per RISC-V privilege specification, a platform may choose to implement
a coarser granularity scheme for PMP addresses. In that case, we shouldn't
allow any pmp region size smaller than the platform supports. A platform
may not also implement all the bits for a PMP address specified in the priv
specification.
The pmp range granularity and address bits should be detected dynamically
before detecing PMP regions. Any pmp modification request beyond these detected
value must not succeed.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The "reg" property in a device node may not be the correct address always.
If a parent node defines a "ranges" property, the child address need to be
translated with respect to parents address. If the ranges property is not
present, it will just use 1:1 translation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We add initial documentation for OpenSBI domain support to help
RISC-V platform vendors achieve system-level partitioning.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend boot prints to display details of each domain. In the
process, we remove sbi_hart_pmp_dump() because it shows redundant
information which domain details already show.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The PMP configuration on each HART should be only based on the memory
regions of the assigned domain because each domain includes a memory
region to protect the underlying firmware.
This patch updates the sbi_hart_pmp_configure() function accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hart_pmp_get() and sbi_hart_pmp_check_addr() functions
are not used anymore hence this patch removes these functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_cpu_fixup() should disable a HART in DT if the HART
is not assigned to the current HART domain. This patch updates
fdt_cpu_fixup() accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that each HART is mapped to a domain having a set of memory
regions, we update fdt_reserved_memory_fixup() to use domain memory
regions for adding reserved memory nodes in device tree.
We also change reserved memory node name prefix from "mmode_pmp"
to "mmode_resv" because domain memory regions can impact other
hardware configurations (such as IOPMP, etc) along with PMP.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_system_reset() should issue platform system reset only if
domain of current HART is allowed to do system reset.
This patch extends sbi_system_reset() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Instead of calling sbi_hsm_hart_get_state() in a loop, we can simply
call a new inline __sbi_hsm_hart_get_state() which only takes "hartid"
and enforce domain checks using sbi_domain_assigned_hartmask().
This patch optimizes sbi_hsm_hart_started_mask() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hsm_hart_start() should consider the domain under which we
are trying to start the HART. This will help ensure that HART A can
start HART B only if both HARTs A and B belong to the same domain.
We also have a special case when we bring-up boot HART of non-root
domains in sbi_domain_finalize() where we should skip domain checks
in sbi_hsm_hart_start(). To achieve this, sbi_hsm_hart_start() should
do domain checks only when domain parameter is non-NULL.
This patch extends sbi_hsm_hart_start() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hsm_hart_started_mask() API should take one more parameter
to allow caller specify domain under which started_mask is being
generated. Further, the sbi_hsm_hart_started_mask() depends on
sbi_hsm_hart_get_state() which also should return HART state under
specified domain.
This patch updates both sbi_hsm_hart_started_mask() and
sbi_hsm_hart_get_state() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
An OpenSBI domain is a logical entity representing a set of HARTs
and a set of memory regions for these HARTs.
The OpenSBI domains support will allow OpenSBI platforms and previous
booting stage (i.e. U-Boot SPL, Coreboot, etc) to partition a system
into multiple domains where each domain will run it's own software.
For inter-domain isolation, OpenSBI will eventually use various HW
features such as PMP, ePMP, IOPMP, SiFive shield, etc but initial
implementation only use HW PMP support.
This patch provides initial implementation of OpenSBI domains where
we have a root/default domain and OpenSBI platforms can provide
non-root/custom domains using domain_get() callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hartmask_test_hart() does not modify hartmask so the
hartmask pointer parameter should be declared const.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The hartid parameter of sbi_hart_init() is not used anywhere in
sbi_hart_init() implementation so let's remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We factor-out PMP configuration from sbi_hart_init() as a separate
sbi_hart_pmp_configure() function and do the PMP configuration very
late in coldboot and warmboot path just before platform_final_init().
Eventually, this enable us to configure PMP totally based on OpenSBI
domain where OpenSBI domains can be parsed from device-tree in any of
the platform operations except platform_final_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The pmp_region_xyz() callbacks are not required in sbi_platform_operations
because we will be using OpenSBI domain memory regions to program the
PMP CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The sbi_ecall.h and sbi_trap.h are not required to be included in
sbi_platform.h hence we remove it. This way sources requiring
these headers will have to explicitly include it thereby reducing
implicit includes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The Kendryte K210 platform has built-in DTB and does not provides
FW_PAYLOAD_FDT_ADDR. This means the FDT fixups will be done on
the built-in DTB in absence of FW_PAYLOAD_FDT_ADDR. This patch
adds some padding in built-in DTB for FDT fixups.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend d2c.sh to allow padding zeros in output C source when
converting DTB to C source. Using this feature, platforms can
create extra room for in-place FDT fixups on built-in DTBs.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The FW_PAYLOAD_FDT_PATH compile-time option is replaced by
FW_FDT_PATH compile-time option which is more flexible and
common across all OpenSBI firmwares.
This patch removes FW_PAYLOAD_FDT_PATH and updates related
documentation to use FW_FDT_PATH.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, only FW_PAYLOAD has mechanism to embed external
FDT using FW_PAYLOAD_FDT_PATH compile-time option.
This patch adds a common FW_FDT_PATH compile-time option to
embed external FDT for all OpenSBI firmwares (i.e FW_JUMP,
FW_PAYLOAD, and FW_DYNAMIC).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the make rules for ELF, BIN and LD script are little
generic to allowing ELF, BIN and LD script to be anywhere in the
build directory. For OpenSBI firmwares, the ELF, BIN, and LD script
are always platform specific so we update make rules accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
HiFive unleashed currently implements fewer than 56 bits of physical
address so existing PMP CSR detection is broken.
PMP address register encodes bits 55-2 of a 56-bit physical address,
Not all physical address bits may be implemented, So just check
minimum 1 bit.
Fixes: 74d1db7062 ("lib: sbi: Improve PMP CSR detection and
progamming")
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently, the generic platform fw_platform_init() marks non-MMU
HARTs (e.g. E-core on SiFive Unleashed) as invalid. This means
such non-MMU HARTs won't be allowed to go ahead by sbi_init().
The sbi_init() now has a check for next stage privilege mode when
selecting coldboot HART. This check will force non-MMU HARTS (i.e.
HARTs without S-mode) to proceed in warmboot path and wait in the
HSM STOPPED state. This means we don't need to mark non-MMU HARTs
as invalid in generic platform fw_platform_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The coldboot HART jumps to the next booting stage at the end of
init_coldboot() so it is absolutely necessary for coldboot HART
to support the privilege mode expected by the next booting stage.
We extend the coldboot HART selection in sbi_init() to ensure that
the selected coldboot HART always supports privilege mode specified
in scratch space (i.e. scratch->next_mode). This will further help
us allow E-core (without MMU) on SiFive Unleashed and PolarFire
ICICLE boards to proceed further and wait in HSM STOPPED state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_cpu_fixup() should work fine even if HARTs without MMU
are not marked invalid by platform support code.
In future, we plan to treat HARTs without MMU as valid in the
generic platform support so that we can hold these HARTs in
HSM STOPPED state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend sbi_hart_pmp_check_addr() API so that users can specify
privilege mode of the address for checking PMP access permissions.
To achieve this, we end-up converting "unsigned long *size" parameter
to "unsigned long *log2len" for pmp_get() implementation so that we
can deal with regions of "1UL << __riscv_xlen" size in a special case
in sbi_hart_pmp_check_addr() implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_scratch already has provision to specify the next stage mode
so we can leverage this to specify start mode to sbi_hsm_hart_start().
In future, this will be useful in providing SBI calls to U-mode on
embedded cores where we M-mode and U-mode but no S-mode.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should allow M-mode to M-mode ECALLs because:
1. No other mode can handle M-mode ECALLs
2. In future, we can allow M-mode baremetal application (not
linked to OpenSBI) running independently and cooperatively
without corrupting OpenSBI M-mode state (CSRs and memory).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We rename CAUSE_HYPERVISOR_ECALL to CAUSE_SUPERVISOR_ECALL and
CAUSE_SUPERVISOR_ECALL to CAUSE_VIRTUAL_SUPERVISOR_ECALL so that
it matches latest RISC-V privilege spec.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The VS-mode ecall is supposed to be handled by HS-mode so
sbi_trap_handler() should fallback to default case for
VS-mode ecall trap.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We improve HPM CSR read/write emulation as follows:
1. Fail for unimplemented counters so that trap is redirected
to S-mode which can further help debugging S-mode software.
2. Check permissions in both MCOUNTEREN and SCOUNTEREN for
HS-mode and U-mode.
3. Don't check permissions for TIME CSR because we emulate
TIME CSR for both Host (HS/U-mode) and Guest (VS/VU-mode).
Also, faster TIME CSR read is very helpful for good
performance of S-mode software.
4. Don't emulate S-mode CSR read/write to M-mode HPM CSRs
because these should not be accessible to S-mode software.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch does following cosmentic changes to riscv_encoding.h:
1. Re-organize CSR defines to match CSR listing in latest RISC-V
privilege spec
2. Rename CSR_HCOUNTERNEN to CSR_HCOUNTEREN
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
A RISC-V platform can leave unimplemented MHPM counters hard-wired
to zero. We extend hart_detect_features() to detect MHPM counters
which are accessible and not hard-wired to zero. We also print
number of available MHPM counters as part of boot prints.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
As-per latest RISC-V privilege spec up to 64 PMP entries are supported.
Implementations may implement zero, 16, or 64 PMP CSRs. All PMP CSR
fields are WARL and may be hardwired to zero.
This patch improves PMP CSR detection and progamming considering
above facts.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The SBI_HART_HAS_PMP feature is redundant because we already
have number of PMP regions returned by sbi_hart_pmp_count().
Checking whether PMP is supported for a HART can be simply done
by checking non-zero value returned by sbi_hart_pmp_count().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The Kendryte K210 follows RISC-V v1.9 spec so MTVAL has instruction
address (instead of instruction encoding) on illegal instruction trap.
To handle above case, we fix sbi_illegal_insn_handler() without any
impact on RISC-V v1.10 (or higher) systems. This achieved by exploiting
the fact that program counter (and instruction address) is always 2-byte
aligned in RISC-V world.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have thundering hurd problem with coldboot_lock where the
boot HART can potentially starve trying to acquire coldboot_lock
because some of the non-boot HARTs are continuously acquiring and
releasing coldboot_lock. This can happen if MIP.MSIP bit is already
set for some of the non-boot HARTs.
To avoid thundering hurd problem for coldboot_lock, we use the
__smp_load_acquire() and __smp_store_release() for coldboot_done
flag and use coldboot_lock only for coldboot_wait_hmask.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
When passing the device tree to the next stage we should apply necessary
device tree fix-ups first. These include:
* fix up the CPU node in the device tree
* fix up the PLIC node in the device tree
* fix up the reserved memory node in the device tree
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When redirecting from VS/VU-mode to HS-mode, hstatus.SPVP was set
to the value of mstatus.SPP, as according to the specification both
flags should be set to the same value.
However, the assignment of SPVP takes place before SPP itself is
updated, which results in SPVP having an outdated value.
Signed-off-by: Georg Kotheimer <georg.kotheimer@tu-dresden.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently, the low-level trap handler (i.e. _trap_handler()) uses
branch instructions to conditionally setup exception stack based
on which mode trap occured.
This patch implements exception stack setup using xor instructions
which is faster with same number of instructions due to lack of
branch instructions.
The new exception stack setup approach can be best described by the
following pseudocode:
Came_From_M_Mode = ((MSTATUS.MPP < PRV_M) ? 1 : 0) - 1;
Exception_Stack = TP ^ (Came_From_M_Mode & (SP ^ TP))
Came_From_M_Mode = 0 ==> Exception_Stack = TP
Came_From_M_Mode = -1 ==> Exception_Stack = SP
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
If MTINST[0:0] bit is 1 then we have transformed instruction encoding
in MTINST CSR. For transformed instructions, if the MTINST[1:1] bit
is Zero then original trapped instruction was a 16bit instruction
which was converted to 32bit instruction at time of taking trap.
We should use MTINST[1:1] bit to determine correct instruction length
of transformed instruction.
This patch updates misaligned load/store emulation as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Use strncmp instead of using sbi_strcmp directly in fdt_parse_hart_id()
to allow compiling fdt_helper.c by external firmware.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The value assigned to x by the shift assignment in the last if block of
ffs/fls is never read. Remove it.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently 256 bytes is used for the FDT expand size when fixing up
reserved memory node. Increase it to 1024 bytes with an estimated
size of 64 bytes per PMP memory region by 16 regions in total.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Consistently use reference-style markdown links in the README. This
won't show the URL next to the linked text for the [Github] and [U-Boot]
links and link the text "Bootlin toolchain repository" instead of
showing it verbatim with the URL next to it.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
U-Boot v2020.07 release adds SPL support to SiFive HiFive Unleashed.
Update the doc to mention that detailed build instructions are in the
U-Boot doc.
This also adds detailed command line description to show how to boot
U-Boot v2020.07 S-mode payload in the QEMU chapter.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Since QEMU v5.1, if there is no "-bios" option provided, the default
OpenSBI firmware will be loaded by QEMU as the BIOS automatically,
hence to load fw_payload type image, we should explicitly pass the
"-bios" option to QEMU.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Since QEMU v5.1, if there is no "-bios" option provided, the default
OpenSBI firmware will be loaded by QEMU as the BIOS automatically,
hence to load fw_payload type image, we should explicitly pass the
"-bios" option to QEMU.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should only return valid error codes from SBI ecalls as
defined by the RISC-V SBI spec.
To achieve this:
1. We use SBI_Exxxx defines for OpenSBI internal errors with
error values starting from -1000
2. We use SBI_ERR_xxxx defines for errors defined by SBI spec
3. We map some of the SBI_Exxxx defines to SBI_ERR_xxxx defines
which are semantically same
4. We throw a error print and force return error code to
SBI_ERR_FAILED in sbi_ecall_handler() if we see an invalid
error code being returned to S-mode
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
On RV64,"unsigned long" is 64bit and "unsigned int" is 32bit. So in
function "pmp_get" and "pmp_set", if "pmpcfg_shift >= 32", "0xff << pmpcfg_shift"
will go beyond "unsigned int" width. This patch tries to fix this issue.
In function 'pmp_get':
cfgmask = (0xff << pmpcfg_shift);
-->
cfgmask = (0xffUL << pmpcfg_shift);
In function 'pmp_set':
cfgmask = ~(0xff << pmpcfg_shift);
-->
cfgmask = ~(0xffUL << pmpcfg_shift);
Signed-off-by: Liush <liush.damon@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
C-Class is a member of the SHAKTI family of processors from Indian
Institute of Technology - Madras(IIT-M).
It is an extremely configurable and commercial-grade 5-stage in-order
core supporting the standard RV64GCSUN ISA extensions.
https://gitlab.com/shaktiproject/cores/c-class/blob/master/README.md
We add OpenSBI support for Shakti C-class SoC.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Changes are made to support our FPGA evaluation board,
it has DDR memory(0xA0000000-0xB0000000).
* Adapt the config.mk to match FPGA evaluation board DDR memory address
* Since the RISC-V CPU core frequency of FPGA might change, so we use the
fixed TIMER frequency to measure the real CPU core frequency.
* And the UART baudrate has to set to 57600bps for Nuclei FPGA evaluation
board when CPU core frequency is about 8MHz, otherwise the UART input
will not work correctly.
Signed-off-by: Huaqi Fang <578567190@qq.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This is achieved by removing the 'no-map' property from the
'reserved-memory' node when PMP is present, otherwise we keep it as it
offers a small protection if the OS does not map this region at all.
A new callback in platform_override is introduced and allows to fixup the
device-tree. It is used here to override this new default behaviour on
SiFive Fu540 platforms that has an erratum that prevents S-mode software
to access a PMP protected region using 1GB page table mapping.
If PMP is present, telling the OS not to map the reserved regions does not
add much protection since it only avoids access to regions that are already
protected by PMP. But by not allowing the OS to map those regions, it
creates holes in the OS system memory map and prevents the use of
hugepages which would generate, among other benefits, less TLB miss.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The arguments/parameters of __sbi_hfence_gvma_vmid_gpa() and
__sbi_hfence_vvma_asid_va() functions are swapped so we fix it.
Currently, we did not face any issues because QEMU does a full
TLB flush for all HFENCE instructions.
We also improve documentation of HFENCE.GVMA and HFENCE.VVMA
instruction encoding.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch contains the following AE350 specific SBIs:
- get mcache_ctl status
- get mmisc_ctl status
- set mcache_ctl status
- set mmisc_ctl status
- I-cache operation
- D-cache operation
- enable/disable L1-I-cache prefetch
- enable/disable L1-D-cache prefetch
- enable/disable non-blocking load store
- enable/disable write-around
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Reviewed-by: Anup Patel <Anup.Patel@wdc.com>
Reviewed-by: Atish Patra <Atish.Patra@wdc.com>
U-Boot now supports loading Linux kernel image via network and storage
media. Thus, we don't need to use a combined payload containing both
U-Boot & Linux kernel image to boot Linux from U-Boot prompt.
Remove the old documentation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The doxygen config option "USE_MDFILE_AS_MAINPAGE" can be used to set
the main page in doxygen generated pdf. This allows us to remove the
"#mainpage" from the README file which markdown doesn't parse.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
To support RISC-V hypervisor v0.6.1, we:
1. Don't need to explicitly forward WFI traps from VS/VU-mode
2. Have to delegate virtual instruction trap to HS-mode
3. Have to update trap redirection for changes in HSTATUS CSR
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that no platform is using FW_PAYLOAD_FDT mechanism, we
remove related code from Makefile and related documentation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We update kendryte/k210 to use new mechanism of having builtin DTB
where we convert k210.dts to C source and further compile-n-link it
with libplatsbi.a.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, we can only include one DTB as builtin for a platform
using FDT_PAYLOAD_DTB make variable in platform config.mk.
This patch adds new mechanism using which we can convert any DTS
file to C source and futher compile-n-link it with libplatsbi.a.
The generated C source will have the DTB contents as an array
"const char <varprefix>_start[]" where <varprefix> is specified
in platform objects.mk makefile.
Example1
--------
If we have built-in k210.dts and desired <varprefix> is
"dt_k210" then specify following in platform objects.mk:
platform-objs-y += k210.o
platform-varprefix-k210.o = dt_k210
Example2
--------
If we have built-in abc/k210.dts and desired <varprefix> is
"dt_abc_k210" then specify following in platform objects.mk:
platform-objs-y += abc/k210.o
platform-varprefix-abc-k210.o = dt_abc_k210
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
In order to use GCC style defines and macros in DTS, we should
preporcess builtin DTS before converting it to DTB.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the fw_platform_init() does not return anything but we can
further improve by allowing fw_platform_init() to return updated FDT
location.
It is certainly not mandatory for fw_platform_init() to return a new
location of FDT (or modify FDT). In fact, the fw_platform_init() can
always return the original FDT location (i.e. 'arg1') unmodified.
This new capability of fw_platform_init() will allow platforms to:
1. Have multiple built-in FDTs and select one
2. Modify FDT before using based on platform specific straps or OTP
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, we are ORing FW_OPTIONS with the options passed by
previous booting stage to fw_dynamic. This causes confusion
because compiling fw_dynamic with FW_OPTIONS=0x2 does not force
enable boot prints as the U-Boot SPL passes options=0x1 in
fw_dyanmic_info.
The best thing to do is always prefer FW_OPTIONS when available.
This is intuitive for OpenSBI users and easy in debugging.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, fw_prev_arg1() is called after fw_platform_init() which
caused builtin DTB to be not available to fw_platform_init().
To allow builtin DTB available to fw_platform_init(), we should
call fw_save_info() and fw_prev_arg1() before fw_platform_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The make rule for builtin DTB compilation does not consider
out-of-tree platforms so this patch fixes it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have multiple matching DT nodes of the same FDT timer driver
so in this case we should call cold_init() for all matching DT nodes
instead of just first matching DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have multiple matching DT nodes of the same FDT ipi driver
so in this case we should call cold_init() for all matching DT nodes
instead of just first matching DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_clint_node() function which will be used by
fdt_ipi_clint and fdt_timer_clint drivers to parse CLINT details
from DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend CLINT cold init function to have a "struct clint_data *"
parameter pointing to CLINT details. This allows platforms to use
CLINT functions for multiple CLINT instances.
When multiple CLINTs are present, the platform can also provide
one of the CLINT as reference CLINT for other CLINTs. This will
help CLINTs to sync their time value with reference CLINT using
a time_delta computed in warm init function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have multiple matching DT nodes of the same FDT irqchip
driver so in this case we should call cold_init() for all matching
DT nodes instead of just first matching DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend fdt_find_match() implementation by adding node offset
parameter which represents the first node to match from.
The improved fdt_find_match() can be used to find multiple
match nodes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend all PLIC functions to have a "struct plic_data *"
parameter pointing to PLIC details. This allows platforms to
use these functions for multiple PLIC instances.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The "target_hart" and "hart_count" parameters of PLIC cold and
warm init functions are only used for sanity checks and not
required in PLIC initialization.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
It is not mandatory for a RISC-V systems to implement all PMP
regions so we have to check all PMPADDRx CSRs to determine excat
number of supported PMP regions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
This patch does few cosmetic improvements to HART feature detection:
1. Remove sbi_ perfix from HART feature detection functions
because all local/static functions in sbi_hart.c don't have
sbi_ prefix
2. Remove sbi_hart_set_feature() because it's quite small and
local/static in sbi_hart.c
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
It makes more sense to have scratch pointer as parameter in
HART feature APIs because:
1. We already have scratch pointer at places where these APIs
are used.
2. This is consistent with lot of other APIs in sbi_hart.h
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
On platforms with continuous HART ids starting from zero:
0 <= boot HART id < platform HART count
The above co-relation of boot HART id and platform HART count
is true for most RISC-V platfors so it's better to print platform
HART count just before boot HART id.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We do following improvements for get_feature_str():
1. We should return "none" from get_feature_str() no features
available instead of sbi_boot_prints() explicitly handling
failure.
2. We don't need to return failure (just like misa_xlen())
because we are returning "none" for no features and we are
truncating output when space is not available.
3. Based on 1 and 2, the sbi_boot_prints() can be further
simplified.
4. No need for two char[] in sbi_boot_prints()
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should detect HART features in sbi_hart_init() before
mstatus_init(), delegate_traps() and pmp_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, unprivileged access functions uses few additional instructions
which are redundant. It also uses specific registers which are not necessary.
Remove those additional instructions and let the compiler choose the
registers.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We have now clear distinction between platform and hart features.
Modify the boot print messages to print hart specific features in
a string format.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We have now clear distinction between platform and hart features.
Modify the boot print messages to print platform features in a string
format. In the process, this patch moved relatively larger functions
to its own file from platform.h header file.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As per the RISC-V specification, time value can be obtained from a time
CSR implemented in hardware or a MMIO based IP block. Qemu virt machine
already supports timer csr while CLINT provides the timer for other
platforms.
Implement a hart specific timer feature that can be detected at runtime.
As CSR based timer implementation are faster than MMIO address based, it
is always preferred over MMIO based one.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Any platform feature that belongs to a hart, have already been moved to
hart features and are detected at run time. The remaining platform features
are identical to platform default features.
Use the platform default features instead of defining a separate copy of it.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
PMP & performance counters belong to a hart rather than a platform.
In addition to that, these features enable reading/writing from a
particular csr. Thus, they can be detected and set at runtime rather
than compile time.
Move PMP/MCOUNTEREN/SCOUNTEREN features to hart and detect them at runtime.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There may be some features which are hart specific rather than a platform
specific feature. Add a framework to support that.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As per RISC-V ISA, pmp is not mandatory. Currently, we only add reserved
memory node in DT only if PMP is present. That allows supervisor to access
the memory where OpenSBI continue to exist without realizing it for non-pmp
based platforms. It may result in corrupting OpenSBI. That's why OpenSBI
should at least let the supervisor know where it continue to exist.
This a best effort service provided by OpenSBI expecting that supervisor
software is not buggy and properly sets up its memory after parsing the
reserved-memory device tree node.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There may be few common mathematics helper functions which can be used
anywhere in OpenSBI project.
Add a separate math helper function file to add these functions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As RISC-V ISA allows many CSRs such as pmp, s/mcounteren to be optional
in hardware, OpenSBI should provide an option to dynamically detect
these csr access capability at run time.
Implement a csr read/write access check helper macros.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Unprivileged trap handler can be reused for any cases where the executing
code expects a trap.
Rename it to "expected" trap handler as it will be used in other cases in
future.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Doxygen does not support italic text in page title so fix
some of the markdown files accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, all markdown pages are randomly arranged in table of
contents so to fix this we treat top-level README.md as mainpage
and enable Doxygen TREEVIEW.
Also, there should not be any text before title of a markdown
page so we move project copyright as separate section in top-level
README.md.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The generic platform provides IPI and timer functionality based on
DT node provided in the FDT passed by previous booting stage. This
patch updates generic platform documentation about IPI and timer
expectations.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The generic platform will try to select serial console based on the
stdout-path DT property in /chosen DT node hence we document this.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The RISC-V ISA string does not follow alphabetical order. Instead,
we have a RISC-V specific ordering of extensions in the RISC-V ISA
string. This patch improves misa_string() implementation to return
a valid RISC-V ISA string.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The HFENCE VVMA instructions flushes TLB based on the VMID
present in HGATP CSR. To handle this, we get the current
VMID for SBI HFENCE VVMA call and we use this current VMID
to do remote TLB HFENCE VVMA on desired set of HARTs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We don't have page table programming in OpenSBI so let's remove
redundant page table related defines from riscv_encoding.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The OpenSBI generic platform works perfectly fine on the QEMU spike
machine and Spike emulator so let's remove dedicated Spike platform
from OpenSBI.
All Spike platform related documentation in OpenSBI will now suggest
using OpenSBI generic platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The OpenSBI generic platform works perfectly fine on the QEMU virt
machine so let's remove dedicated QEMU virt machine platform from
OpenSBI.
All QEMU virt machine related documentation in OpenSBI will now
suggest using OpenSBI generic platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We need to override the remote TLB flush range limit for SiFive FU540
so we add platform override to achieve this.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that we have generic platform which detects hart count from
DTB, we should print platform hart count at boot time.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add generic FDT based platform support which provides platform
specific functionality based on the FDT passed by previous booting
stage.
By default, the generic FDT platform makes following assumptions:
1. platform FW_TEXT_START is 0x80000000
2. platform features are default
3. platform stack size is default
4. platform has no quirks or work-arounds
The above assumptions (except 1) can be overridden by adding special
platform callbacks which will be called based on the FDT root node
compatible string.
By default, we compile OpenSBI generic platform as follows:
$ make PLATFORM=generic
For a non-standard FW_TEXT_START, we can compile OpenSBI generic
platform as follows:
$ make PLATFORM=generic FW_TEXT_START=<non_standard_text_start>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add optional fw_platform_init() function which will allow
platform specific code to update "struct sbi_platform platform"
before it is used.
The fw_platform_init() can be a regular C function so before
callint it we:
1. zero-out BSS section
2. Setup temporary trap handler to catch bugs
3. Setup temporary stack pointer
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple reset framework which will select and use reset driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple serial framework which will select and use serial driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple irqchip framework which will select and use irqchip driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple ipi framework which will select and use ipi driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple timer framework which will select and use timer driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Getting array size of a dynmaic array can be very handy hence
this patch.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We add fdt_parse_plic_node() function which will allow us to parse
a particular DT node as PLIC node. This will be useful in parsing
the DT node which we have found by matching compatible string.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_max_hart_id() API which return max HART id based
on CPU DT nodes. This will be used by generic FDT based drivers in
subsequent patches.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Parsing HART id from a CPU DT node is a common requirement for
RISC-V systems. The newly added fdt_parse_hart_id() also helps
reduce duplicate code between fdt_cpu_fixup() function and
fdt_parse_hart_count() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We add fdt_parse_sifive_uart_node() function which will allow
us to parse a particular DT node as SiFive UART node. This will
be useful in parsing the node pointed by stdout-path.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_get_node_addr_size() will be useful in FDT based simple
driver frameworks so we make it a public function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds FDT match table based node lookup funcitons.
These functions will be useful in implementing simple FDT
based driver frameworks.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_parse_clint() is quite generic and can be used for other
types of devices so we rename it to fdt_parse_compat_addr().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The clint_ipi_sync() was removed long time back hence we remove
redundant declaration from clint.h
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_uart8250_node() function which will allow us
to parse a particular DT node as UART 8250 node. This will be
useful in parsing the node pointed by stdout-path.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The information parsed by fdt_parse_uart8250() API is not complete.
We need to parse reg-shift and reg-io-width for UART 8520 as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This patch factor-out SiFive test device related stuff into
it's own source file from qemu/virt platform. In future, we
can find SiFive test device address from device tree as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can achieve shutdown, cold reboot, and warm reboot using just
one sbi_platform callback so we combine system_reboot() and
system_shutdown() callbacks into one system_reset() callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The default (usually last) PMP region provides S-mode access to
complete memory range not covered by other PMP regions.
Currently, the default PMP region is described as platform specific
PMP region which is not appropriate because all platforms need it
and default PMP region should be part of generic library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Ideally, the SBI implementation ID for OpenSBI should always be
0x1 (as mentioned in SBI v0.2 spec) but external firmware (such
as EDK2) which use OpenSBI as library might want to override the
SBI implementation ID with their custom implementation ID.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Enable vector context in mstatus by updating the corresponding bits
in mstatus if vector extension is supported by the hart.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As per the PLIC specification, maximum priority threshold value is 0x7.
Even though, writing a higher value doesn't cause any error in qemu
hifive unleashed, there may be some implementation which checks the upper
and may result in an illegal access.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch removes scratch parameter from sbi_dprintf() function
because sbi_dprintf() can use sbi_scratch_thishart_ptr() to get
current HART scratch space.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_ipi_send_many() should get current HART scratch pointer
on it's own using eventually hence removing scratch parameter from
sbi_tlb_request().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The patch adds sbi_scratch_last_hartid() API which returns
last HART id having a scratch space. We can use this new API
to optimize places where we iterate over HART id from 0 to
SBI_HARTMASK_MAX_BITS.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should remove the "arch_" prefix from atomic xchg() and cmpxchg()
function names to have consistent naming of all atomic functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The priv parameter in hart_start() platform callback is redundant hence
we remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch simplify sbi_trap_handler() API as follows:
1. Remove current hartid local variable because sbi_trap_handler()
itself does not need it.
2. Remove scratch parameter because none of the functions directly
called by sbi_trap_handler() require it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We remove mcause, scratch and hartid parameters from various
functions for ecall handling because we can always get current
HART id and current scratch pointer using just one CSR access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We remove mcause, scratch and hartid parameters from various functions
for misaligned load/store handling because we can always get current
HART id and current scratch pointer using just one CSR access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We remove mcause, scratch and hartid parameters from various
functions for illegal instruction handling because we can always
get current HART id and current scratch pointer using just one
CSR access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We remove scratch and hartid parameter from various functions
for CSR emulation because we can always get current HART id
and current scratch pointer using just one CSR access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The scratch parameter of sbi_trap_redirect() is not used hence we
remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The scratch parameter of unpriv load/store functions is now redundant
hence we remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch optimize unpriv load/store implementation by having
dedicated unpriv trap handler (just like KVM RISC-V).
As a result of this optimization:
1. We have reduced roughly 13+ instruction in all unpriv load/store
functions. The reduced instruction also include two function calls.
2. Per-HART trap info pointer in scratch space is now redundant
hence removed.
3. The sbi_trap_handler() is now much cleaner because we don't have
to handle unpriv load/store traps.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the fdt_cpu_fixup() implementation assumes:
1. We have one CPU DT for each HART under /cpus DT node
2. The CPU DT nodes are named sequentially (i.e cpu@0,
cpu@1, ...) which is not true for discontinuous and
sparse HART ids (i.e. cpu@0, cpu@4, cpu@5). Generally,
CPU DT node are named based on HART id and not HART
index
If any of the above assumptions are violated then the
fdt_cpu_fixup() will not work.
This improves fdt_cpu_fixup() implementation and makes
it independent of above assumptions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch extends/revamps create-binary-archive.sh to allow creating
unified binary tar ball containing both RV32 and RV64 images. Users
can also create "RV32 only" or "RV64 only" tar balls as well.
Few example commands are as follows:
./scripts/create-binary-archive.sh (Build both RV32 & RV64 images)
./scripts/create-binary-archive.sh -x 32 (Build RV32 only images)
./scripts/create-binary-archive.sh -x 64 (Build RV64 only images)
Signed-off-by: Anup Patel <anup.patel@wdc.com>
HSM_STOP will trigger multiple executions of sbi_init, atomic_add_return may
trigger coldboot_lottery overflow
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
OpenPiton is designed to run on different FPGAs with different
configurations. Use the fdt parser to retrieve the required values
from device tree instead of using fixed values.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
FDT helper file contain both fdt fixup and parsing functions.
Split the fixup related functions to a separate file for a better code
organization.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Different DT based platforms from the sam family may reuse IP blocks with
different configurations. These different configurations can be obtained
by parsing the device tree.
Add a FDT parser framework that can parse various device configurations from
device tree. Currently, the parsing algorithms doesn't cover all the use cases
or possible combination of DT configurations. It will be improved over time.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
OpenPiton is a research platform from Princeton University [1].
"OpenPiton is the world's first open source, general purpose,
multithreaded manycore processor. It is a tiled manycore
framework scalable from one to 1/2 billion cores."
Add OpenSBI support for OpenPiton. As it is based on ariane core,
it reuses the platform code from arine project.
[1]. https://github.com/PrincetonUniversity/openpiton
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
All the common PLIC specific macros are already defined in plic.c.
Remove it from platform code. While at it, Fix the other coding style
issues.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Commit 71d2b837c4 (lib: Move all coldboot wait APIs to sbi_init.c)
caused a regression while moving the code from sbi_hart.c to sbi_init.c.
As per original commit text, WFI can be implemented as a NOP according
to the RISC-V privilege specification. Software should ensure that
relevant interrupt pending bits are set. Otherwise, loop back to WFI.
Fix the regression by applying the original patch to sbi_init.c.
Fixes: 71d2b837c4 ("lib: Move all coldboot wait APIs to sbi_init.c")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The original code does not prevent the following scenarios:
> sbi_ecall_register_extension(ext1); /* extension id (70-80) */
> sbi_ecall_register_extension(ext2); /* extension id (50-100) */
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The FU540_ENABLED_HART_MASK compile time option was added for initial
bring-up on SiFive Unleashed. This option is redundant now because
disabled_hart_mask is already removed. Based on this rationale, we
remove FU540_ENABLED_HART_MASK compile time option.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
A platform can have discontinuous and/or sparse HART ids so we
cannot always assume a set of HARTs with continuous HART ids.
This patch adds support for discontinuous and sparse HART ids by
introducing HART index to HART id table. This table has platform
hart_count entries and it maps HART index to HART id.
The HART index to HART id table has only two restrictions:
1. HART index < sbi_platform hart_count
2. HART id < SBI_HARTMASK_MAX_BITS
Example1:
Let's say we have a platform with 2 HART ids 11 and 22, for such a
a platform:
hart_count = 2
hart_index2id[0] = 11
hart_index2id[1] = 22
Example2:
Let's say we have a platform with 5 HARTs ids 0, 1, 2, 3, and 4
but out of these HART with id 0 is not usable so for such a platform:
hart_count = 5
hart_index2id[0] = -1U
hart_index2id[1] = 1
hart_index2id[2] = 2
hart_index2id[3] = 3
hart_index2id[4] = 4
OR
hart_count = 4
hart_index2id[0] = 1
hart_index2id[1] = 2
hart_index2id[2] = 3
hart_index2id[3] = 4
With HART index to HART id table in place, the hart_disabled()
callback is now redundant so we remove it as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We don't need to use sbi_platform_hart_count() in sbi_init and
sbi_scratch because checking sbi_platform_hart_disabled() or
return value of sbi_hartid_to_scratch() is sufficient.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Checking return value of sbi_hartid_to_scratch() is sufficient
so no need to explicitly check for disabled HART using the
sbi_platform_hart_disabled() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The scratch parameter in sbi_hsm_hart_started_mask() API is now
redundant hence removing it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We remove usage of sbi_platform_hart_count() API from sbi_hsm
so that discontinuous and sparse HART ids can be supported.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
As a step towards supporting discontinuous and sparse HART ids, we
don't set hartid_to_scratch table for disabled HARTs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_platform_hart_disabled() should return TRUE for HART id
greater than platform hart count.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The sbi_hartid_to_scratch() API can fail for non-existent HARTs so
all uses of sbi_hartid_to_scratch() API should check return value.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch simplify HART id to scratch macro as follows:
1. Remove current "scratch" pointer argument because now we
use HART id to scratch table
2. Rename sbi_hart_id_to_scratch() to sbi_hartid_to_scratch()
to have macro name consistent with the name of callback
in struct sbi_scratch
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Instead of calling hartid_to_scratch() callback every time when
we want sbi_scratch pointer from HART id, we create a table of
sbi_scratch pointers and use that to get sbi_scratch pointer.
As a result of HART id to scratch table, the conversion of
HART id to sbi_scratch pointer is just 2-3 instructions which
was 9 instructions previously.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Platform andes/ae350, ariane-fpga, qemu/virt and sifive/fu540 codes
have been updated to call this general DT fix-up helper.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This adds a general device tree fix-up helper to do all required
device tree fix-ups for a typical platform.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This replaces the FU540 specific cpu0 node "status" property fix-up
with the newly introduced generic fdt_cpu_fixup() helper.
Unlike previous logic, the helper routine does not test the "mmu-type"
property to determine which node we should fix up, instead it uses
sbi_platform_hart_disabled() API.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Add a helper routine to updates the "status" property of a CPU node
in the device tree to "disabled" if that hart is in disabled state.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As of today the upstream U-Boot & Linux kernel ships a device tree
that already has "stdout-path" properly set in the "/chosen" node.
This is the same with the QEMU 'sifive_u' machine. Hence the codes
to fix up the "stdout-path" in OpenSBI is not necessary.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This calls fdt_reserved_memory_fixup() helper in the platform's
final_init() routine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This calls fdt_reserved_memory_fixup() helper in the platform's
final_init() routine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This calls fdt_reserved_memory_fixup() helper in the platform's
final_init() routine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This calls fdt_reserved_memory_fixup() helper in the platform's
final_init() routine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that we have a dedicated fdt_helper.c file for DT releated
helper routines, move plic_fdt_fixup() codes from plic.c to
fdt_helper.c and rename it to fdt_plic_fixup() at the same time,
to keep name consistency in the same file.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Adjust the order of include header files in alphabetical order in
platform codes. Also remove unnecessary inclusions.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Add a helper routine to insert a child node of the reserved memory
node in the device tree that describes the protected memory region
done by OpenSBI via PMP.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Pull fdt_addresses.o in for fdt_address_cells() & fdt_size_cells().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently pmp_get() returns the log2 length of the PMP memory
region size. The caller has to calculate the size based on that
and the same codes are duplicated.
Update this function to return decoded size directly.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We now support building sifive/fu540 as a 32-bit platform. Add it
in the 32-bit platform list of binary archive script.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As of today all platforms use 8KB of per-HART stack hence there is
no need for each platform to define its own macro or use the magic
number. Create one macro for all platforms. Platform still can use
its own version if needed.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The template platform codes should set per-HART stack size to 8KB
to avoid possible mistakes of future platform ports.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Recent commit
4a603eb ("platform: kendryte/k210: Set per-HART stack size to 8KB")
forgot to update ariane-fpga codes, and the following commit
678c3c3 ("include: sbi_scratch: Set per-HART scratch size to 4KB")
changed the per-HART scratch size to 4KB, which potentially breaks
ariane-fpga platform.
This patch set per-HART stack size of ariane-fpga to 8KB for consistency.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The default install directory is not being removed correctly by
distclean make target due to recent changes. This patch fixes
distclean make target to fix default install directory removal.
Fixes: 82ae8e8fe2 ("makefile: Do setup of the install target
more flexible")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_current_hartid() being a regular function is quite
expensive because for callers it is a function call instead
of a direct CSR read. This patch converts sbi_current_hartid()
into a macro in riscv_asm.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that sbi_hart_id_to_scratch() is optimized, we don't need
the "if ()" statement. Also, the hstate local variable is
redundant so we remove that as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch optimizes _hartid_to_scratch() in following ways:
1. Use caller saved registers instead of callee saved registers
so that we don't need to save/restore registers on stack
2. Remove second redundant mul instruction by re-arranging
instructions
Overall, we reduce 9 instructions in _hartid_to_scratch()
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The sbi_hart_id_to_scratch() just forwards call to firmware specific
hartid_to_scratch() callback so we make sbi_hart_id_to_scratch() as
macro in sbi_scratch.h instead of regular function in sbi_hart.c.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Add two macros in preparation to sync libfdt codes to latest v1.5.1
release from upstream.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We currently have TRUE/FALSE, but it could be convenient to have
true/false as well.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Compile time checks of __riscv_compressed can only check if OpenSBI is
being compiled using compressed instructions or not. Checking this macro
does not indicate if an instruction that generated a misaligned trap is
a compressed instruction or not.
Since the misaligned trap handling code inspects instructions _C_ bits
to detect compressed instructions, we can remove all static checks on
__riscv_compressed and dissociate hanlding of misaligned traps and
OpenSBI compilation.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Upstream U-Boot now have SMP support and doesn't require any additional
patches for HiFive Unleashed.
Update the documentation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The HART available mask and related APIs are now totally redundant
because of more extensive HART state machine implemented by sbi_hsm.
Due to above, we remove HART available mask and related APIs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This patch replaces use of sbi_hart_available_mask() API with
sbi_hsm_hart_started_mask() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This patch replaces use of sbi_hart_available_mask() API with
sbi_hsm_hart_started_mask() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This patch replaces use of sbi_hart_available_mask() API with
sbi_hsm_hart_started_mask API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This patch introduce sbi_hsm_hart_started_mask() API as
a replacement of sbi_hart_available_mask() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The disabled_hard_mask in sbi_platform is only 64bits wide so we
cannot disable a HART with HARTID > 63. To tackle this, we remove
disabled_hart_mask and replace it with hart_disabled() platform
callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The coldboot_wait_bitmap is of fixed size and has __riscv_xlen
bits. This limits us to scale beyond __riscv_xlen HARTs hence
we replace coldboot_wait_bitmap with coldboot_wait_hmask which
is of type struct sbi_hartmask.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The coldboot wait APIs are only used by sbi_init.c so no point in
having coldboot related code in sbi_hart.c.
As per-above rationale, we move all coldboot wait related APIs to
sbi_init.c as static/local functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Instead of using single ulong as source mask for sbi_tlb_info,
we use sbi_hartmask. This way sbi_tlb_info can easily scale
for large number of HARTs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We introduce SBI_TLB_INFO_INIT() helper macro to help easy
initialization of struct sbi_tlb_info which is passed to the
sbi_tlb_request() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We only allow HARTs with HARTID less than SBI_HARTMASK_MAX_BITS in
sbi_init() function so that sbi_hartmask can safely used across
OpenSBI sources.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add a simple hartmask library to create and maintain HART mask
in different parts of OpenSBI sources. This new library is build
as wrapper library on-top-of bitmap library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple bitmap library which will help us create and maintain
bitmaps. It will also help us create a simple HART mask library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This fixes various coding style issues found in the serial codes.
No functional changes.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This fixes various coding style issues found in the SBI codes.
No functional changes.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently, the per-HART scratch size is 256 bytes on RV32 and
512 bytes on RV64. This patch set per-HART scratch size to 4KB
(4096 bytes) for both RV32 and RV64 so that we don't run-out
of scratch space anytime soon.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
All platform except kendryte/k210 use 8KB of per-HART stack hence
this patch set per-HART stack size of kendryte/k210 to 8KB for
consistency.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch extends our bit operation library with mechanism to:
1. Iteratively traverse bits
2. Set bit
3. Clear bit
4. Change bit
5. ... other helpful functions ...
Most the above is adopted from Xvisor sources.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The right location for all bits related defines and macros is
sbi_bitops.h hence this patch. With this patch, the sbi_bits.h
is redundant so we remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
There has already been a commit to master which added 32-bit specific
fdt/payload addresses for the sifive/fu540 platform [0]. This commit
introduces another change for using sifive/fu540 as a 32-bit platform.
On 32-bit platforms, cores with the SV32 MMU type should not be
disabled. For this reason, this commit also allows using this MMU type
on the sifive/fu540 platform.
Alternatively it would also be possible to only allow SV39 and SV48 if
`__riscv_xlen == 64` and SV32 if `__riscv_xlen == 32`. Removing the
check entirely would also be an option.
[0]: 66fb729a1e
Signed-off-by: Sören Tempel <tempel@uni-bremen.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
As per the RISC-V privilege specification, WFI can be implemented as
a NOP. Software should ensure that relevant interrupt pending bits
are set. Otherwise, loop back to WFI.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
SBI HSM extension defines possible hart status values in the
specification.
Define all possible status values. Add a helper function to
convert hart state to status because hart states are internal
to OpenSBI only and may not match the status values defined in
the specification.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch adds support for hart hotplug in OpenSBI using a generic WFI
based approach. Hart hotplug can be achieved via SBI HSM extension which
allows supervisor mode software to start or stop any harts anytime.
Any platform wishes to implement platform specific hart hotplug must
implement both hart_start and hart_stop in addition to enable platform
feature SBI_PLATFORM_HAS_HART_HOTPLUG.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
A platform may have a specific method to bring-up secondary harts for the
first time but may rely on generic WFI based approach for hart hotplug in
absence of a platform specific hart hotplug method.
Define a platform feature flag for such platforms. The platform needs to
implement platform specific bring-up method in hart_start and not define
hart_stop method in this case. They must only define
SBI_PLATFORM_HAS_HART_SECONDARY_BOOT.
SBI_PLATFORM_HAS_HART_HOTPLUG should only be defined when the platform
intend to support both hart_start and hart_stop and do not intend to rely
on generic WFI based approach.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We don't need to separately call sbi_ipi_send() for current HART
in sbi_ipi_send_many(). Instead, we can simplify the for-loop in
sbi_ipi_send_many() and call sbi_ipi_send() for all HARTs in the
for-loop itself.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
As per the latest SBI specification, all online harts should receive
IPI if hbase is set to -1.
Set the target mask to all available hart mask if hbase is -1.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There is a typo in atomic operations code which prevents the
usage of riscv atomic instructions even if it is supported.
Fix the typo.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
For testing 32-bit SiFive specific drivers with QEMU riscv32, add
32-bit specific FW_JUMP_FDT_ADDR and FW_PAYLOAD_OFFSET.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We print MIDELEG and MEDELEG CSRs as part of boot prints so that
boot log shows the interrupts and exceptions delegated to S-mode.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The MIDELEG and MEDELEG CSR checks at end of delegate_traps() were
added for initial bring-up on SiFive Unleashed and QEMU. These
checks are not required any more and in-future these checks can
cause failures because some of the MIDELEG/MEDELEG bits will be
hard-wired to 0 or 1.
For related discussion, refer github issue:
https://github.com/riscv/opensbi/issues/157
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When building 32-bit OpenSBI images, we get:
lib/utils/sys/htif.c: In function '__check_fromhost':
lib/utils/sys/htif.c:12:31: error: left shift count >= width of type
[-Werror=shift-count-overflow]
#define HTIF_DATA_MASK ((1UL << HTIF_DATA_BITS) - 1)
^~
Fixes: c2f23cc6ed ("platform: Add Spike initial support")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This reverts commit 897b8fbdd9.
We are seeing compile errors using newlib based GCC cross-toolchain
so we restore back old ctz() implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
- make title underline the same length as the title itself
- satisfy the 80 character per line rule as much as possible
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
- make title underline the same length as the title itself
- put all URLs at the end of the doc
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Various styles fixes including:
- satisfy the 80 character per line rule as much as possible
- make title underline the same length as the title itself
- remove the redundant FPGA (was FPGA FPGA SoC)
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Various styles fixes including:
- satisfy the 80 character per line rule as much as possible
- remove unnecessary spaces between words
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
- put all URLs at the end of the doc
- satisfy the 80 character per line rule as much as possible
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch adds documentation to build and run OpenSBI on
Spike simulator and QEMU Spike machine.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The Spike platform support works perfectly fine on QEMU RV64 Spike
machine and Spike emulator.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This patch removes stale options from config.mk files of
Ariane FPGA and QEMU virt platform support.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
To initialize PLIC in sane state, we should:
1. set maximum threshold value of M-mode PLIC contexts
2. set maximum threshold value of S-mode PLIC contexts
3. set irq priorities to miniumum
Fix the comment and initialize the threshold/priorities correctly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
As per the SBI specification, the return value in sbiret is undefined
if not explicitly described in the function. However, supervisor may
check this value by mistake and get a garbage value.
Initialize it to zero to avoid nasty supervisor bugs.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Document that when U-Boot v2020.01 (or higher) is used as the payload,
we need adjust the instructions a little bit when testing OpenSBI with
QEMU 'sifive_u' machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
With QEMU v4.2 RISC-V changes to improve the emulation fidelity
of 'sifive_u' machine, OpenSBI v0.4 / U-Boot v2019.10 / Linux
kernel v5.3 images built for the SiFive HiFive Unleashed board
can be used out of the box without any special hack. Hence there
is no need for us to continue supporting such a special target in
OpenSBI. Going forward, sifive/fu540 platform can be used on both
real hardware and QEMU 'sifive_u' machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
On macOS the readlink command does not include a -f flag. Instead default
to using GNU readlink (which is often installed as greadlink).
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
It was reported that tlb range flush is not working on fu540.
Only tlb full flush seems to work on fu540 probably due to some
hardware errata.
Set the tlb flush limit to zero so that all tlb flush requests
are converted to full flush.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
If a platform requires to perform a tlb full flush, they should set
the tlb_range_flush_limit value to zero. However, corresponding platform
API ignore the value and continue to return the default value.
Add a platform ops to retrieve platform specific tlb range flush limit.
The platform variable becomes redundant in presence of the platform ops.
Take this opportunity to remove the variable as well.
The default is still set to smallest page size in RISC-V (4KB), as there
is no way to figure out a best value for all platforms. Individual platform
should set it to the optimal value for their platform.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch factor-out SBI base extension into its own source
for better modularity of SBI implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch factor-out SBI vendor extension into its own source
for better modularity of SBI implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch factor-out SBI replacement extensions (such as RFENCE,
IPI, and TIME) into its own source for better modularity of SBI
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch factor-out SBI legacy extension into its own source
for better modularity of SBI implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch extends our SBI ecall implementation to allow
dynamic registration of various SBI extensions. Using this
dynamic registration we can break-up SBI ecall implementation
into multiple files and even register experimental/custom
SBI extensions from platform code.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the remote TLB management is initialized via IPI init
which is counter intuitive. This patch initializes remote TLB
management directly from init_coldboot() and init_warmboot()
after IPI init is done.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch drops _fifo from the name of various sbi_tlb_fifo_xyz()
functions because all these functions deal with remote TLB managment
and FIFO is the per-HART data structure used internally by remote
TLB implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch introduces sbi_ipi_event_create/destroy() APIs and
struct sbi_ipi_event_ops for creating/destroying IPI events
at runtime based of event operations.
This new APIs will help platform code and utils code to create
custom IPI events which are not part of generic OpenSBI library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Instead of directly calling sbi_ipi_send_many(), we introduce
sbi_tlb_fifo_request() for halting a set of HARTs.
This way in future we can assign any IPI event number for remote
FENCE within sbi_tlb.c only.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Instead of directly calling sbi_ipi_send_many(), we introduce
sbi_ipi_send_halt() for halting a set of HARTs.
This way in future we can assign any IPI event number for HART
halting within sbi_ipi.c only.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Instead of directly calling sbi_ipi_send_many(), we introduce
sbi_ipi_send_smode() for injecting S-mode software interrupts.
This way in future we can assign any IPI event number for S-mode
IPIs within sbi_ipi.c only.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The struct sbi_ipi_data is only used in sbi_ipi.c so move it
to sbi_ipi.c from sbi_ipi.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch fixes a minor typo in comment for SBI_SCRATCH_SIZE define.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch adds T-HEAD C910 to RV64 platform list in the binary
archive script.
Signed-off-by: Liu Yibin <yibin_liu@c-sky.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Since all harts share the same plic/clint address now, setting
them during cold boot is just fine.
Signed-off-by: Liu Yibin <yibin_liu@c-sky.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Since all harts share the same L2 cache now, there's
no need to Enable L2 cache in warm boot.
Signed-off-by: Liu Yibin <yibin_liu@c-sky.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Move the .align directives after switching the section. We want to align
the start of the current section, not the end of the previous section.
This also obsoletes the misguided workaround of disabling relaxation.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
With U-Boot v2020.01, the SiFive FU540 DTB required by U-Boot is
embedded in U-Boot binary itself so we don't need to do anything
special for U-Boot v2020.01 as payload to OpenSBI firmware.
This patch updates SiFive FU540 documenation assuming we use
latest U-Boot v2020.01 release.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
T-head c910 is a generic FPGA platform so we cannot
define PMP configuration for it in OpenSBI because
PMP configuration tend to be SOC specific.
Signed-off-by: Liu Yibin <yibin_liu@c-sky.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Add OPENSBI_EXTERNAL_SBI_TYPES macro to allow external definitions of data
types and common macros. Also move some common definitions from sbi_bits.h to sbi_types.h.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
this is a stand-alone/baremetal application, therefore demanding
-ffreestanding would help it compile with hosted toolchains e.g. ( linux
toolchains ), it also ensures that it won't be using platform
optimizations like inlining mem* str* functions which gcc might decide
especially with wrapper string functions in opensbi code
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We add sbi_init_count() API which provides number of times a
given HART completed init sequence (warmboot/coldboot).
This will be very useful in debugging. With upcoming SBI HSM
extension, it will also help in implementing one-time init
code for each HART.
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should zero-out memory allocated from extra scratch space using
sbi_scratch_alloc_offset() API hence this patch. This will not
impact performance because we mostly allocate from extra scratch
space only at cold boot time.
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We improve sbi_system_reboot() an sbi_system_shutdown() by:
1. Calling halt IPI to all harts (except current HART) before
calling platform reboot/shutdown hook.
2. Calling sbi_exit() instead of sbi_hang() in-case platform
reboot/shutdown hook failed.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Instead of doing sbi_hang() we should do sbi_exit() upon
halt IPI.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, sbi_hart_wait_for_coldboot() leaves MIE.MSIP bit
set when it returns which is not correct because MIE.MSIP
should be left enabled only by sbi_ipi_init().
This patch does save/restore of MIE CSR to ensure that MIE
CSR is in original state after sbi_hart_wait_for_coldboot()
returns.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add sbi_ipi_exit() API for exit path handling in sbi_exit()
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add sbi_timer_exit() API for OpenSBI exit path handling in
sbi_exit() implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch adds system-level early_exit and final_exit APIs
with corresponding platform hooks. These new APIs will be
primarily used by sbi_exit() in OpenSBI exit path.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch adds initial implementation of sbi_exit() API which
can be used to perform OpenSBI exit sequence for current HART.
The sbi_exit() implementation will be further extended by
subsequent patches.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We remove unnecessary checks related to hart hotplug and disabled
hart in coldboot and warmboot init path.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
It is possible to have a CLINT implementation which supports
only 32bit MMIO accesses on RV64 system so this patch extends
our CLINT driver such that platform code can specify whether
CLINT supports 64bit MMIO access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra<atish.patra@wdc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
This patch updates FW_JUMP and FW_PAYLOAD documentation for the
case where FW_xyz_FDT_ADDR is not specified.
Signed-off-by: Liu Yibin <yibin_liu@c-sky.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The state of a0, a1, and a2 registers in fw_prev_arg1() and
fw_next_arg1() is same as passed by previous booting stage
so we add this info in comments for both these functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Function fw_next_arg1 in firmware/fw_jump.S:59 and
firmware/fw_payload.S:63 should return real dtb
address(if specified in a1) in a0, in case we don't
want to specify FW_xyz_FDT_ADDR when compiling.
Signed-off-by: Liu Yibin <yibin_liu@c-sky.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The hypervisor specification support hfence calls which can be used
issue tlb flush requests at both level of address translation. Currently,
these requests are issued only via SBI which are defined in v0.2.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently, the toolchains do not have support for hfence instruction.
Hence, the instruction are hardcode until we have toolchain support.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch adds new IPI extension which replaces ipi related
v0.1 extensions. This also adds a new API for ipi sending as trap
handling is not necessary in v0.2 SBI IPI related extensions.
It also modifies the IPI sending code which now accepts hart mask as a value
instead of S-mode virtual address. Thus, the caller should set it to exact hart
mask value everytime.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch adds support for TIME extension which replaces v0.1
timer extension.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We just need to distinguish only between FENCE and non FENCE related
IPIs as all of the fence related requests are handled via fifo now.
Remove the unnecessary IPI types related to individual fence types.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Take this opportunity to move the enums to macros as enums make
sbi_ecall_interface.h unusable in assembly files.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We should use MTINST CSR in misaligned load/store emulation whenever
possible to avoid unpriv read in getting trapped instruction. This will
improve preformance on HW having proper implementation of MTINST CSR.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The hypervisor v0.5 spec introduces two new CSRs for both M-mode
and HS-mode which need to be considered when redirecting traps
hence this patch.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
We should treat load guest page fault in sbi_get_insn() as
fetch guest patch fault.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We have two new trap CSRs namely mtval2 and mtinst when
RISC-V hypervisor extension is available hence we extend
struct sbi_trap_info accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
As-per RISC-V hypervisor v0.5 spec, we have new guest page faults
which need to be delegated to HS-mode.
Also, we can have bits in in MIDELEG and MEDELEG hardwired to 1
which means we need to fix the sainty check on these CSRs at the
end of delegate_traps() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
With RISC-V H-extension v0.5 draft, we have special support for guest
external interrupts so this patch adds related defines which were
missed-out previously.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
GCC-9 will throw a warning when using the %s format specifier with a
possible NULL parameter and since -Werror is used, the compilation breaks
for GCC-9.
In function 'sbi_boot_prints',
inlined from 'init_coldboot' at <redacted>/opensbi/lib/sbi/sbi_init.c:107:3,
inlined from 'sbi_init' at <redacted>/opensbi/lib/sbi/sbi_init.c:189:3:
<redacted>/opensbi/lib/sbi/sbi_init.c:56:2: error: '%s' directive argument is null [-Werror=format-overflow=]
56 | sbi_printf("Platform Name : %s\n", sbi_platform_name(plat));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This is one way to fix this, currently there is nothing in the tree
checking for `sbi_platfrom_name() == NULL` so we can just return "Unknown"
instead of NULL on failure.
Signed-off-by: Martin Pietryka <martin@pietryka.at>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Tested-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
On some platforms, misa may not be implemented. On such a platform,
reading misa will get 0. At this time, platform is required to
implement a non-standard function to detect the CPU's capabilities.
Therefore, this modification add interfaces for non-standard function.
The MXL field of misa is always at the highest two bits, whether it
is a 32-bit 64-bit or a 128-bit machine. Therefore, this modification
fixes the use of a fixed offset to detect the machine length.
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The out_tcause and out_tval parameters are not sufficient for most
sbi_ecall functions because this will grow in-future when we support
RISC-V hypervisor v0.5 draft. We replace these parameters with out_trap
which is a pointer to struct sbi_trap_info.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The unpriv APIs can be useful to external firmware and out-of-tree
platform support code.
This patch adds "sbi_" prefix to unpriv load/store APIs and rename
struct riscv_unpriv to struct sbi_trap_info everywhere. We also
place struct sbi_trap_info in sbi/sbi_trap.h so that we can use
it for sbi_trap_redirect() as well.
Overall, this patch will make naming of unpriv APIs consistent
with other OpenSBI APIs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We don't need to set VSSTATUS.MXR bit in get_insn() for
unpriv instruction read because MSTATUS.MXR bit applies
to both "Stage1" and "Stage2" page tables.
This also allows us to remove the "virt" parameter of
get_insn() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We simplify struct unpriv_trap by removing ilen member. This
can be achieved by ensuring that at all unpriv load/store
instructions are 4 bytes long using GCC assembler option.
Additionally, this also reduces few instructions from unpriv
load/store functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Building the date and time into the binary means the OpenSBI isn't
reproducible. We don't really need the time so let's remove it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
It has been reported that link address range of previous booting stage
(such as U-Boot SPL) can overlap the link address rage of FW_DYNAMIC.
This means self-relocation in FW_DYNAMIC can potentially corrupt
previous booting stage if any of the secondary HART enter FW_DYNAMIC
before primary HART.
To tackle this, we add preferred boot HART field (i.e boot_hart) in
struct fw_dyanmic_info. We use this field to force secondary HARTs
into relocation wait loop till preferred/primary boot HART enters
FW_DYNAMIC completes self-relocation. If preferred boot HART is not
available then we fall back to relocation lottery approach.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The riscv_encoding.h is shared with assembly sources so we use
_UL() and _ULL() for register fields related defines.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch sync-up encoding header with the latest privilege
specifications draft v1.12 and hypervisor specifications draft v0.5.
The MSTATUS.MTL and HSTATUS.STL bits are not present anymore and
will be removed by another patch series for hypervisor v0.5-draft.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Instead of forcing HART0 to do the relocation and scratch init
work, we should have an atomic lottery to decide which HART does
the relocation and scratch init.
This way any HART can be boot/main HART.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We get following compile error for FW_PAYLOAD with latest GCC
binutils:
fw_payload.o(.text+0x1961): 15 bytes required for alignment to 16-byte
boundary, but only 14 present
Further investigating, it turn-out to be a known issue with RISC-V
GCC binutils.
(Refer, https://github.com/riscv/riscv-gnu-toolchain/issues/298)
As a work-around, we disable relaxation when including DTB and
PAYLOAD binary in fw_payload.S.
Reported-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
2019-10-28 20:11:42 +05:30
258 changed files with 19031 additions and 5017 deletions
[coreboot](https://www.coreboot.org/) is a free/libre and open source firmware platform support multiple hardware architectures( x86, ARMv7, arm64, PowerPC64, MIPS and RISC-V) and diverse hardware models. In RISC-V world, coreboot currently support HiFive Unleashed with OpenSBI as a payload to boot GNU/Linux:
[coreboot] is a free/libre and open source firmware platform support multiple
hardware architectures(x86, ARMv7, arm64, PowerPC64, MIPS and RISC-V) and
diverse hardware models. In RISC-V world, coreboot currently support HiFive
Unleashed with OpenSBI as a payload to boot GNU/Linux:
```
SiFive HiFive unleashed's original firmware boot process:
The upstreaming work is still in progress. There's a [documentation](https://github.com/hardenedlinux/embedded-iot_profile/blob/master/docs/riscv/hifiveunleashed_coreboot_notes-en.md) about how to build [out-of-tree code](https://github.com/hardenedlinux/coreboot-HiFiveUnleashed) to load OpenSBI.
The upstreaming work is still in progress. There's a [documentation] about how
The FU540-C000 is the world’s first 4+1 64-bit RISC-V SoC from SiFive.
The HiFive Unleashed development platform is based on FU540-C000 and capable
of running Linux.
@@ -8,103 +8,53 @@ With QEMU v4.2 or above release, the 'sifive_u' machine can be used to test
OpenSBI image built for the real hardware as well.
To build platform specific library and firmwares, provide the
*PLATFORM=sifive/fu540* parameter to the top level `make` command.
*PLATFORM=generic* parameter to the top level `make` command.
Platform Options
----------------
As hart0 in the FU540 doesn't have an MMU, only harts 1-4 boot by default.
A hart mask i.e. *FU540_ENABLED_HART_MASK* compile time option is provided
to select any other hart for booting. Please keep in mind that this is not
a generic option and it can only be specified for FU540 platform in the
following way:
```
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=Image FU540_ENABLED_HART_MASK=0x02
```
This will let the board boot only hart1 instead of default 1-4.
The *SiFive FU540 SoC* platform does not have any platform-specific
options.
Building SiFive Fu540 Platform
-----------------------------
------------------------------
In order to boot SMP Linux in U-Boot, Linux v5.1 (or higher) and latest
U-Boot v2019.04 (or higher) should be used.
U-Boot v2020.01 (or higher) should be used.
**Linux Kernel Payload**
The HiFive Unleashed device tree(DT) is merged in Linux v5.2 release. This
DT (device tree) is not backward compatible with the DT passed from FSBL.
To use Linux v5.2 (or higher, the pre-built DTB (DT binary) from Linux v5.2
To use Linux v5.2 (or higher), the pre-built DTB (DT binary) from Linux v5.2
(or higher) should be used to build SiFive FU540 OpenSBI binaries by using
the compile time option *FW_PAYLOAD_FDT_PATH*.
the compile time option *FW_FDT_PATH*.
```
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image
make PLATFORM=generic FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image
or
(For Linux v5.2 or higher)
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image FW_PAYLOAD_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel>
make PLATFORM=generic FW_PAYLOAD_PATH=<linux_build_directory>/arch/riscv/boot/Image FW_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel>
```
**U-Boot Payload**
The command-line example here assumes that U-Boot was compiled using the
sifive_fu540_defconfig configuration and with U-Boot v2019.04 (or higher)
having SMP support. From, Linux v5.2 (or higher) device tree is hosted in
Linux kernel and compiled as a part of Linux kernel build process.
The detailed U-Boot booting guide is avaialble at [U-Boot](https://gitlab.denx.de/u-boot/u-boot/blob/master/doc/board/sifive/fu540.rst)
sifive_fu540_defconfig configuration and with U-Boot v2020.01, and up to
v2021.04. sifive_unleashed_defconfig shall be used with v2021.07 or above.
```
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot.bin
or
(For U-Boot which follows Linux v5.2 (or higher) DT bindings)
make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=<u-boot_build_dir>/u-boot.bin FW_PAYLOAD_FDT_PATH=<hifive-unleashed-a00.dtb path from Linux kernel>
```
Generate the uImage from Linux Image.
```
mkimage -A riscv -O linux -T kernel -C none -a 0x80200000 -e 0x80200000 -n Linux -d \
<linux_build_directory>/arch/riscv/boot/Image \
<linux_build_directory>/arch/riscv/boot/uImage
```
**U-Boot & Linux Kernel as a single payload**
A single monolithic image containing both U-Boot & Linux can also be used if
network boot setup is not available.
1. Generate the uImage from Linux Image.
```
mkimage -A riscv -O linux -T kernel -C none -a 0x80200000 -e 0x80200000 -n Linux -d \
<linux_build_directory>/arch/riscv/boot/Image \
<linux_build_directory>/arch/riscv/boot/uImage
```
2. Create a temporary image with u-boot.bin as the first payload. The
command-line example here assumes that U-Boot was compiled using
* Copyright (c) 2020 Western Digital Corporation or its affiliates.
*
* Authors:
* Anup Patel <anup.patel@wdc.com>
*/
#ifndef __SYS_SIFIVE_TEST_H__
#define __SYS_SIFIVE_TEST_H__
#include<sbi/sbi_types.h>
intsifive_test_init(unsignedlongbase);
#endif
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
