Commit 4813a20420 ("lib: sbi_init: Call hart init and timer init
before platform early init") reordered the cold/warm boot sequence so
that sbi_timer_init() runs before sbi_platform_early_init().
The SG2042 platform workaround that merges the 16 separate timer
regions into a single domain memregion was previously performed in
early_init(). After the reordering the MTIMER driver therefore adds
the individual regions first, defeating the purpose of the combined
region (and wasting PMP entries).
Move the addition of the combined memregion into extensions_init(),
which is invoked from sbi_hart_init() and consequently still executes
before sbi_timer_init().
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Signed-off-by: Xiang W <wangxiang@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260721150844.741606-1-wangxiang@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
Some T-Head based processors, for example the Sophgo SG2044, have a
JTLB errata that requires special handling of certain TLB maintenance
instructions (sfence.vma).
Introduce a sbi_tlb_local_operations structure so platforms can provide
custom local TLB flush implementations. Use it to implement the JTLB
workaround on affected SoCs (currently Sophgo SG2044).
Signed-off-by: Xiang W <wangxiang@iscas.ac.cn>
Signed-off-by: Han Gao <gaohan@iscas.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260617112925.1144190-2-wangxiang@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
PMU_AP_CORE2_IDLE_CFG and PMU_AP_CORE3_IDLE_CFG are not continuous with
PMU_AP_CORE0_IDLE_CFG and PMU_AP_CORE1_IDLE_CFG. They are at PMU AP
base + 0x160 and + 0x164, matching the vendor OpenSBI definitions. After
fixing these addresses, the intermediate cluster offset macros are
redundant now, so define the wakeup and idle registers directly as
PMU_AP_BASE offsets. This makes the actual register addresses easier to
inspect and compare against the vendor code.
C1_RVBADDR_HI_ADDR is also corrected according to the vendor OpenSBI
definition. This was tested by writing an invalid value to the corrected
address, which prevents cluster1 CPUs from coming online, while doing
the same with the old address does not affect SMP boot.
Fixes: 1f84ec2a ("platform: generic: spacemit: add K1")
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Link: https://lore.kernel.org/r/20260623-k1-fix-addr-v1-1-3dbde8c03bd6@pigmoral.tech
Signed-off-by: Anup Patel <anup@brainfault.org>
During warm reset, my EIC770X/Hifive Premier P550 can sometimes
encounter memory corruption issue crashing Linux boot. Currently the
issue is mitigated by having a sbi_printf before writing to the reset
register. I analyzed the issue further since then. From the SoC
datasheet[1], it's recommended to implement power-down flow as:
a. Designate a primary core, and let it broadcast requests to other
cores to execute a CEASE insn. Primary core also notifies an
"Externel Agent" to start monitoring.
b. Primary core waits for other cores to CEASE before it CEASEs.
c. "External Agent" waits for primary core to CEASE before resets
the Core Complex.
It's possible that EIC770X can trigger undefined behavior if the core
complex is reset while the harts are actively running. The sbi_printf
in the reset handler effectively hides the problem by delaying the
reset -- by the time sbi_printf finishes, all other harts will have
already landed in the loop in sbi_hsm_hart_wait(), which parks the hart.
Without the sbi_printf, I confirmed that other harts haven't reached
sbi_hsm_hart_wait yet before current hart resets the SoC. (by debugging)
To safely reset, and inspired by the datasheet, the warm reset logic
in eic770x.c now use the current hart as both primary core and the
"External Agent", and other harts as secondary cores. It leverages
the HSM framework and a new eic770x_hsm device to CEASE other harts,
and wait for them to CEASE before resets the SoC. with the sbi_printf
before reset removed, and this logic in place, stress test shows that
the memory corruption issue no longer occurs.
The new eic770x_hsm device is only used for the reset-CEASE logic at
the moment, and may be extended to a fully functional HSM device in
the future.
[1] https://github.com/eswincomputing/EIC7700X-SoC-Technical-Reference-Manual
Fixes: e5797e0688 ("platform: generic: eswin: add EIC7700")
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260605075708.96-3-ganboing@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Instead of parsing ISA extensions separately for each hart in the
generic_extensions_init() function, it is better to parse ISA extensions
for all available harts in the cold boot path. Also, this allows us
to remove fdt_isa_bitmap from scratch space and directly initialize
"extensions" in struct sbi_hart_features for each hart.
Signed-off-by: Anup Patel <anup.patel@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260521082625.1520870-3-anup.patel@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The payload for FW_PAYLOAD needs to be placed at a 2M/4M aligned address
(for 64/32 bit systems) and the current makefile uses FW_PAYLOAD_OFFSET
to achieve this. This only works if FW_TEXT_START is already 2M/4M
aligned. Most existing physical/virtual platforms have used a
FW_TEXT_START of 0x0 or 0x80000000, so this hasn't been an issue so far.
If, for example, FW_TEXT_START is 0x80000, the payload would end up
placed at 0x280000 on a 64 bit system, which isn't a 2M aligned
address.
Update the makefile to use FW_PAYLOAD_ALIGN instead. This will ensure
that the address picked for the payload is 2M/4M aligned irrespective of
where FW_TEXT_START is.
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260508-payload_alignment-v1-1-6628b4ec1ed3@oss.tenstorrent.com
Signed-off-by: Anup Patel <anup@brainfault.org>
PMP functions that deal with hart PMP CSRs are given a sbi_hart_ prefix,
to distinguish from RISC-V PMP encoding functions.
The is_pmp_entry_mapped() function is changed a little more, to align
with other PMP conventions, and made to return a bool to make it more
obvious that it returns a bool and not an SBI_ return code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260430045528.420437-8-npiggin@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a simple SpacemiT I2C driver for basic byte transfers over the I2C
bus, prioritizing simplicity over performance. The driver operates in
PIO mode and does not use interrupts, FIFO, or DMA.
The controller is reset at the start of each transaction to ensure a
known initial state, regardless of prior configuration by the kernel.
This also avoids the need for additional error recovery code.
This will be used for communication with onboard PMIC to reset and
power-off the board.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20260419150857.2705843-2-aurelien@aurel32.net
Signed-off-by: Anup Patel <anup@brainfault.org>
Set a default MMIO region with a single SmePMP entry, which allows us
to save entries for M-mode only devices. The default entry has M-/S-mode
shared permission, so system-level resource protection, such as RISC-V
World extension and WorldGuard checker, will be introduced to protect
M-mode only region access from lower privilege modes.
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Yu-Chien Peter Lin <peter.lin@sifive.com>
Link: https://lore.kernel.org/r/20260224031733.3817148-3-peter.lin@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI code arranges domain PMP regions in a way that last entry is
all-inclusive "0..~0 RWX" and the rest of entries are not programmed.
This causes a problem for the eyeq7h.
CPU can issue speculative prefetches to non-existent addresses. If this
access goes to the system NOC, it is mis-interpreted as an access
violation and error is reported, forcing system reset.
To prevent such a speculative transaction to leave a CPU cluster,
block it using PMP, by restricting memory region to physically present
memory. To achieve this, on early init:
- update flags for the last all-inclusive "0..~0 RWX" entry to be
inaccessible MMIO. MMIO serves to set up PMA attributes to uncached
non-prefetchable, preventing transactions to reach system NOC
- add an all-permissive entry matching DRAM.
Resulting memory regions:
Domain0 Region00 : 0x0000000800100000-0x000000080013ffff M: (F,R,X) S/U: ()
Domain0 Region01 : 0x0000000800100000-0x00000008001fffff M: (F,R,W) S/U: ()
Domain0 Region02 : 0x0000000048700000-0x000000004870ffff M: (I,R,W) S/U: ()
Domain0 Region03 : 0x0000000067480000-0x000000006748ffff M: (I,R,W) S/U: ()
Domain0 Region04 : 0x0000000067500000-0x000000006750ffff M: (I,R,W) S/U: ()
Domain0 Region05 : 0x0000000048740000-0x000000004875ffff M: (I,R,W) S/U: ()
Domain0 Region06 : 0x00000000674c0000-0x00000000674dffff M: (I,R,W) S/U: ()
Domain0 Region07 : 0x0000000067540000-0x000000006755ffff M: (I,R,W) S/U: ()
Domain0 Region08 : 0x0000000000000000-0x000000007fffffff M: (I,R,W) S/U: (R,W)
Domain0 Region09 : 0x0000000800000000-0x00000008ffffffff M: () S/U: (R,W,X)
Domain0 Region10 : 0x0000001000000000-0x0000001fffffffff M: (I) S/U: (R,W)
Domain0 Region11 : 0x0000000000000000-0xffffffffffffffff M: (I) S/U: ()
Here Region09 covers DRAM, region 11 set to non-accessible
uncached no-prefetch for the entire address range
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260223-for-upstream-eyeq7h-v3-21-621d004d1a21@mobileye.com
Signed-off-by: Anup Patel <anup@brainfault.org>
CPU clusters 1 and 2 cannot access NCORE registers through AUX ports.
AUX ports of clusters 1 and 2 are connected to NCORE through east port.
East port has no access to NCORE registers address space.
Re-route NCORE registers range to MEM port by re-configuring MMIO
regions in the GCR. REsulting map is as below. Mind a gap between
regions [1] and [2]; this gap covering NCORE registers now routed
to the default MEM port
Cluster 0: 4 MMIO regions
[0] : 0x0000000000000000-0x000000001fff0000 AUX0 UC|UCA
[1] : 0x0000000020000000-0x00000000677f0000 AUX0 ANY
[2] : 0x0000000080000000-0x0000001fffff0000 AUX0 UC|UCA
[3] : --disabled--
Cluster 1: 4 MMIO regions
[0] : 0x0000000000000000-0x000000001fff0000 AUX0 UC|UCA
[1] : 0x0000000020000000-0x00000000677f0000 AUX0 ANY
[2] : 0x0000000080000000-0x0000001fffff0000 AUX0 UC|UCA
[3] : --disabled--
Cluster 2: 4 MMIO regions
[0] : 0x0000000000000000-0x000000001fff0000 AUX0 UC|UCA
[1] : 0x0000000020000000-0x00000000677f0000 AUX0 ANY
[2] : 0x0000000080000000-0x0000001fffff0000 AUX0 UC|UCA
[3] : --disabled--
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260223-for-upstream-eyeq7h-v3-19-621d004d1a21@mobileye.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Modify the coherence manager register accessors to use the global variable
p8700_cm_info instead of the statically declared GLOBAL_CM_BASE array.
Also use p8700_cm_info to get the number of coherence managers and their
base addresses in mips_p8700_early_init() and mips_p8700_nascent_init().
Clean up the hard-coded values in mips/board.h, access to the coherence
manager is now fully based on information provided by platform compatible
from the device tree.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260223-for-upstream-eyeq7h-v3-9-621d004d1a21@mobileye.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Introduce a structure p8700_cm_info holding the number of coherence
managers and their base addresses found in a particular SoC.
Declare a global pointer to the structure that is set in
mips_p8700_platform_init(), based on the match data of the platform
compatible.
For the match data of the MIPS P8700, a single coherence manager with
a base address of 0x16100000 is declared, identical to what is found
in mips/board.h.
For now, access to the coherence manager register is still based on
the hard-coded values defined in mips/board.h.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260223-for-upstream-eyeq7h-v3-8-621d004d1a21@mobileye.com
Signed-off-by: Anup Patel <anup@brainfault.org>
In the multi-cluster system each cluster has its own CM (Coherency Manager).
Every CM has its "global" memory address where it is accessible from
any bus master.
Initially, all CMs accessible from the local cluster using same "local"
address. Transactions by local address are not routed through system bus
and thus are faster.
Remap CM in every cluster to the local address matching its global address.
Then, every CM is always accessed using same address, but when transaction
initiated from the local cluster it is routed internally.
This removes need for 2 PMP regions covering local address access.
CM accessor functions simplified because there's no need to detect whether
transaction is local or global
Access timer always in cluster 0
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260223-for-upstream-eyeq7h-v3-7-621d004d1a21@mobileye.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Implement a system-wide suspend driver for the Andes AE350 platform.
This driver supports Andes-specific deep sleep (suspend to RAM) and
light sleep (suspend to standby) functionalities via the ATCSMU.
The major differences between deep sleep and light sleep are:
- Power Domain and Resume Path: Deep sleep powers down the core domain.
Consequently, harts waking from deep sleep resume from the reset
vector. Light sleep utilizes clock gating to the core domain; harts
maintain state and resume execution at the instruction immediately
following the WFI instruction.
- Primary Hart Wakeup: In both modes, the primary hart is woken by
UART or RTC alarm interrupts. In deep sleep, the primary hart is
additionally responsible for re-enabling the Last Level Cache (LLC)
and restoring Andes-specific CSRs.
- Secondary Hart Wakeup: In light sleep, secondary harts are woken
by an IPI sent from the primary hart. In deep sleep, they are
woken by an ATCSMU hardware wake-up command. Furthermore,
secondary harts must restore Andes-specific CSRs when returning
from deep sleep.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Link: https://lore.kernel.org/r/20251229071914.1451587-6-ben717@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Ben Zong-You Xie