updates bsp

.gitignore

@@ -151,3 +151,6 @@ compile_commands.json
 CTestTestfile.cmake
 *.dump
 
+.vscode/c_cpp_properties.json
+semihosting_test/build/semihosting_test
+semihosting_test/build/Makefile

CMakeLists.txt

@@ -1,19 +1,172 @@
+cmake_minimum_required(VERSION 3.12)
+
+# Set default RISC-V toolchain if not specified
+if(NOT DEFINED RISCV_TOOLCHAIN_PATH)
+    set(RISCV_TOOLCHAIN_PATH "/opt/shared/cross-toolchains/gcc13/CentOS/riscv64-unknown-elf/bin" CACHE STRING "Path to RISC-V toolchain")
+endif()
+
+# Allow override of compiler executables
+if(NOT DEFINED RISCV_GCC)
+    set(RISCV_GCC "/opt/shared/cross-toolchains/gcc13/CentOS/riscv64-unknown-elf/bin/riscv64-unknown-elf-gcc" CACHE STRING "RISC-V GCC compiler")
+endif()
+
+if(NOT DEFINED RISCV_GXX)
+    set(RISCV_GXX "${RISCV_TOOLCHAIN_PATH}/riscv64-unknown-elf-g++" CACHE STRING "RISC-V G++ compiler")
+endif()
+
+if(NOT DEFINED RISCV_OBJCOPY)
+    set(RISCV_OBJCOPY "${RISCV_TOOLCHAIN_PATH}/riscv64-unknown-elf-objcopy" CACHE STRING "RISC-V objcopy")
+endif()
+
+if(NOT DEFINED RISCV_OBJDUMP)
+    set(RISCV_OBJDUMP "${RISCV_TOOLCHAIN_PATH}/riscv64-unknown-elf-objdump" CACHE STRING "RISC-V objdump")
+endif()
+
+# Set the compilers
+set(CMAKE_C_COMPILER ${RISCV_GCC})
+set(CMAKE_CXX_COMPILER ${RISCV_GXX})
+
+project(Firmware)
+
+# Define supported configurations
+set(SUPPORTED_BOARDS iss)
+set(SUPPORTED_ISAS "rv32i;rv32im;rv32imc;rv64i;rv64im;rv64imc;imc")
+set(SUPPORTED_ABIS "ilp32;ilp32f;lp64;lp64f")
+
+# Build target options
+option(BUILD_HELLO_WORLD "Build hello-world example" ON)
+option(BUILD_DHRYSTONE "Build dhrystone benchmark" OFF)
+option(BUILD_COREMARK "Build coremark benchmark" OFF)
+option(BUILD_ALL "Build all targets" OFF)
+
+# If BUILD_ALL is ON, enable all targets
+if(BUILD_ALL)
+    set(BUILD_HELLO_WORLD ON)
+    set(BUILD_DHRYSTONE ON)
+    set(BUILD_COREMARK ON)
+endif()
+
+# Set default values and validate configurations
 if(NOT DEFINED BOARD)
-	set(BOARD iss)
+    set(BOARD iss CACHE STRING "Target board")
 endif()
+
 if(NOT DEFINED ISA)
-	set(ISA imc)
+    set(ISA rv32imc CACHE STRING "Target ISA")
 endif()
-message(STATUS "Building firmware using ${BOARD} board configuration")
-add_custom_target(fw-hello-world ALL 
-	COMMAND make -C ${riscvfw_SOURCE_DIR}/hello-world BOARD=${BOARD} ISA=${ISA}
-	USES_TERMINAL
-	WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})
-add_custom_target(fw-dhrystone ALL 
-	COMMAND make -C ${riscvfw_SOURCE_DIR}/benchmarks/dhrystone BOARD=${BOARD} ISA=${ISA}
-    USES_TERMINAL
-    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})
-add_custom_target(fw-coremark ALL 
-	COMMAND make -C ${riscvfw_SOURCE_DIR}/benchmarks/coremark BOARD=${BOARD} ISA=${ISA}
-    USES_TERMINAL
-    WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR})
+
+if(NOT DEFINED RISCV_ABI)
+    if(ISA MATCHES "^rv64")
+        set(RISCV_ABI "lp64" CACHE STRING "RISC-V ABI")
+    else()
+        set(RISCV_ABI "ilp32" CACHE STRING "RISC-V ABI")
+    endif()
+endif()
+
+# Validate configurations
+if(NOT BOARD IN_LIST SUPPORTED_BOARDS)
+    message(FATAL_ERROR "Invalid BOARD specified. Supported boards: ${SUPPORTED_BOARDS}")
+endif()
+
+if(NOT ISA IN_LIST SUPPORTED_ISAS)
+    message(FATAL_ERROR "Invalid ISA specified(${ISA}). Supported ISAs: ${SUPPORTED_ISAS}")
+endif()
+
+if(NOT RISCV_ABI IN_LIST SUPPORTED_ABIS)
+    message(FATAL_ERROR "Invalid ABI specified. Supported ABIs: ${SUPPORTED_ABIS}")
+endif()
+
+# Set RISC-V architecture based on ISA
+if(ISA MATCHES "^rv")
+    set(RISCV_ARCH ${ISA})
+else()
+    # Default to rv32 for backward compatibility
+    set(RISCV_ARCH "rv32${ISA}")
+endif()
+
+# Set BSP base directory
+set(BSP_BASE "${CMAKE_CURRENT_SOURCE_DIR}/bare-metal-bsp")
+
+# Global compile definitions
+add_compile_definitions(BOARD_${BOARD})
+
+# RISC-V specific compiler flags
+set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -O2 -g -march=${RISCV_ARCH}_zicsr_zifencei -mabi=${RISCV_ABI} -mcmodel=medany")
+set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -O2 -g -march=${RISCV_ARCH}_zicsr_zifencei -mabi=${RISCV_ABI} -mcmodel=medany")
+#set(CMAKE_ASM_COMPILER riscv64-unknown-elf-as)
+set(CMAKE_ASM_FLAGS "${CMAKE_ASM_FLAGS} -O2 -g -march=${RISCV_ARCH}_zicsr_zifencei -mabi=${RISCV_ABI} -mcmodel=medany")
+
+# Optional: Enable semihosting support
+option(SEMIHOSTING "Enable semihosting support" OFF)
+if(SEMIHOSTING)
+    add_compile_definitions(SEMIHOSTING)
+endif()
+
+#create interface library for propagating compile options
+#add_library(global_compile_options INTERFACE)
+
+# Compile options
+#target_compile_options(global_compile_options INTERFACE
+#    -march=${RISCV_ARCH}_zicsr_zifencei
+ #   -mabi=${RISCV_ABI}
+ #   -mcmodel=medany
+ #   -O2
+ #   -g
+  #  -ffunction-sections
+  #  -fdata-sections
+#)
+
+
+
+message(STATUS "Building firmware with configuration:")
+message(STATUS "  Board: ${BOARD}")
+message(STATUS "  ISA: ${ISA} (Architecture: ${RISCV_ARCH})")
+message(STATUS "  ABI: ${RISCV_ABI}")
+message(STATUS "  Semihosting: ${SEMIHOSTING}")
+message(STATUS "  Toolchain:")
+message(STATUS "    Path: ${RISCV_TOOLCHAIN_PATH}")
+message(STATUS "    C Compiler: ${CMAKE_C_COMPILER}")
+message(STATUS "    C++ Compiler: ${CMAKE_CXX_COMPILER}")
+message(STATUS "Targets to build:")
+message(STATUS "  hello-world: ${BUILD_HELLO_WORLD}")
+message(STATUS "  dhrystone: ${BUILD_DHRYSTONE}")
+message(STATUS "  coremark: ${BUILD_COREMARK}")
+
+
+add_subdirectory(bare-metal-bsp)
+
+# Add subdirectories based on build options
+if(BUILD_HELLO_WORLD)
+    add_subdirectory(hello-world)
+endif()
+
+
+if(BUILD_DHRYSTONE)
+    add_subdirectory(benchmarks/dhrystone)
+endif()
+
+if(BUILD_COREMARK)
+    add_subdirectory(benchmarks/coremark)
+endif()
+
+# Create an all-inclusive target only if BUILD_ALL is ON
+if(BUILD_ALL)
+    add_custom_target(fw-common ALL
+        DEPENDS 
+            hello-world
+            dhrystone
+            coremark
+    )
+endif()
+
+# Print build instructions
+message(STATUS "")
+message(STATUS "Build instructions:")
+message(STATUS "  Build all targets:           cmake -DBUILD_ALL=ON ..")
+message(STATUS "  Build specific target:       cmake -DBUILD_HELLO_WORLD=ON -DBUILD_DHRYSTONE=OFF -DBUILD_COREMARK=OFF ..")
+message(STATUS "  Configure board:             cmake -DBOARD=iss ..")
+message(STATUS "  Configure ISA:               cmake -DISA=rv32imc ..")
+message(STATUS "  Configure ABI:               cmake -DRISCV_ABI=ilp32 ..")
+message(STATUS "  Enable semihosting:          cmake -DSEMIHOSTING=ON ..")
+message(STATUS "  Set toolchain path:          cmake -DRISCV_TOOLCHAIN_PATH=/path/to/toolchain ..")
+message(STATUS "  Set specific compiler:       cmake -DRISCV_GCC=/path/to/riscv-gcc -DRISCV_GXX=/path/to/riscv-g++ ..")

benchmarks/coremark/CMakeLists.txt

@@ -0,0 +1,66 @@
+cmake_minimum_required(VERSION 3.12)
+project(coremark C)
+
+# Include BSP libwrap
+include(${BSP_BASE}/libwrap/CMakeLists.txt)
+
+# Source files
+set(SOURCES
+    core_portme.c
+    cvt.c
+    ee_printf.c
+    cm/core_list_join.c
+    cm/core_main.c
+    cm/core_matrix.c
+    cm/core_state.c
+    cm/core_util.c
+)
+
+# Create executable
+add_executable(coremark ${SOURCES})
+
+# Include directories
+target_include_directories(coremark PRIVATE
+    ${BSP_BASE}/include
+    ${BSP_BASE}/drivers
+    ${BSP_BASE}/env
+    ${CMAKE_CURRENT_SOURCE_DIR}
+    ${CMAKE_CURRENT_SOURCE_DIR}/cm
+)
+
+# Link with libwrap
+target_link_libraries(coremark PRIVATE
+    LIBWRAP_TGC
+)
+
+# Add compile definitions
+target_compile_definitions(coremark PRIVATE
+    BOARD_${BOARD}
+    PERFORMANCE_RUN=1
+    ITERATIONS=1000
+    COMPILER_FLAGS="${CMAKE_C_FLAGS}"
+    COMPILER_VERSION="${CMAKE_C_COMPILER_VERSION}"
+)
+
+# Set compile options
+target_compile_options(coremark PRIVATE
+    -march=${RISCV_ARCH}_zicsr_zifencei
+    -mabi=${RISCV_ABI}
+    -mcmodel=medany
+    -ffunction-sections
+    -fdata-sections
+    -O2  # Optimization level for benchmarking
+)
+
+# Set linker options
+target_link_options(coremark PRIVATE
+    -T${BSP_BASE}/env/${BOARD}/link.ld
+    -nostartfiles
+    -Wl,--gc-sections
+    ${LIBWRAP_TGC_LDFLAGS}
+)
+
+# Install target
+install(TARGETS coremark
+    RUNTIME DESTINATION bin
+)

benchmarks/dhrystone/.gitignore

@@ -1,2 +1,3 @@
 dhrystone
 /dhrystone.dis
+build/

benchmarks/dhrystone/CMakeLists.txt

@@ -0,0 +1,21 @@
+cmake_minimum_required(VERSION 3.21)
+project(dhrystone C)
+set(TARGET dhrystone)
+set(CMAKE_BUILD_TYPE Release)
+set(ITERATIONS 50000) # 20000 for TGC
+
+add_executable(${TARGET} dhry_1.c dhry_2.c dhry_stubs.c)
+target_include_directories(${TARGET} PRIVATE ${CMAKE_CURRENT_LIST_DIR})
+target_compile_options(${TARGET} PRIVATE -fno-inline -fno-builtin-printf -fno-common -Wno-implicit -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las)
+target_compile_definitions(${TARGET} PRIVATE ITERATIONS=${ITERATIONS} HZ=32768 TIME NO_INIT)
+
+set(BOARD "iss" CACHE STRING "Target board")
+add_subdirectory(../../bare-metal-bsp bsp)
+target_link_libraries(${TARGET} PRIVATE bsp)
+target_link_options(${TARGET} PRIVATE LINKER:--wrap=scanf)
+include(CMakePrintHelpers)
+cmake_print_properties(TARGETS ${TARGET} PROPERTIES COMPILE_DEFINITIONS COMPILE_OPTIONS LINK_OPTIONS INTERFACE_LINK_OPTIONS)
+
+add_custom_command(TARGET ${TARGET} POST_BUILD
+        COMMAND ${CMAKE_OBJDUMP} -S  ${TARGET}.elf > ${TARGET}.dis
+        COMMENT "Creating disassembly for ${TARGET}")

benchmarks/dhrystone/Makefile

@@ -15,9 +15,9 @@ else
     RISCV_ABI:=ilp32
 endif
 # '-lgcc -lm' are needed to add softfloat routines
-CFLAGS  := -g -march=$(RISCV_ARCH)_zicsr_zifencei -mabi=$(RISCV_ABI) -mcmodel=medlow -O3 -DITERATIONS=$(ITERATIONS) -DHZ=32768 -DTIME -DNO_INIT -fno-inline -fno-builtin-printf -fno-common -Wno-implicit \
+CFLAGS  := -g -O3 -DITERATIONS=$(ITERATIONS) -DHZ=32768 -DTIME -DNO_INIT -fno-inline -fno-builtin-printf -fno-common -Wno-implicit \
  -funroll-loops -fpeel-loops -fgcse-sm -fgcse-las
-LDFLAGS := -g -march=$(RISCV_ARCH)_zicsr_zifencei -mabi=$(RISCV_ABI) -mcmodel=medlow -Wl,--wrap=scanf -Wl,--wrap=printf -Wl,--wrap=exit -lgcc -lm
+LDFLAGS := -Wl,--wrap=scanf
 
 TOOL_DIR=$(dir $(compiler))
 

benchmarks/dhrystone_run_multiple.py

@@ -1,108 +0,0 @@
-import argparse
-import os
-import shutil
-import subprocess
-import time
-from pathlib import Path
-
-
-def run_command(command, cwd=None):
-    """Run a shell command in the specified directory and return its output."""
-    result = subprocess.run(
-        command,
-        shell=True,
-        cwd=cwd,
-        stdout=subprocess.PIPE,
-        stderr=subprocess.PIPE,
-        check=False,
-    )
-    return result.stdout.decode("utf-8"), result.stderr.decode("utf-8")
-
-
-def build_test_cases(makefile_dir, iterations):
-    """Run the Makefile with the specified iterations."""
-    make_command = f"make clean && make ITERATIONS={iterations}"
-    stdout, stderr = run_command(make_command, cwd=makefile_dir)
-    if stderr:
-        raise RuntimeError(f"Error during make: {stderr}")
-
-
-def main(simulator_path, makefile_dir):
-    # Directory for generated test cases
-    generated_dir = makefile_dir.parent / "workspace"
-    os.makedirs(generated_dir, exist_ok=True)
-
-    # Define the iterations
-    iterations_list = [10, 20, 30]
-    # 15 value up to 6.000.000 evenly apart on a log scale
-    iterations_list = [
-        1,
-        2,
-        4,
-        8,
-        17,
-        34,
-        69,
-        141,
-        287,
-        582,
-        1182,
-        2401,
-        4878,
-        9910,
-        20133,
-        40914,
-        83103,
-        168830,
-        343042,
-        696712,
-        1414641,
-        2874878,
-        5837995,
-    ]
-
-    for iteration in iterations_list:
-        try:
-            # Update the Makefile with the current ITERATIONS value
-            build_test_cases(makefile_dir, iteration)
-        except RuntimeError as e:
-            print(f"Error during compilation with ITERATIONS={iteration}: {e}")
-            continue
-
-        # Run the simulator with the generated test case
-        exe = makefile_dir / "dhrystone.elf"
-        if not exe.is_file():
-            exit(f"{exe} does not exist")
-        verbose_exe = generated_dir / "bin" / f"dhrystone_{iteration}.elf"
-        os.makedirs(verbose_exe.parent, exist_ok=True)
-        shutil.copy(exe, verbose_exe)
-        backends = ["interp", "llvm", "tcc", "asmjit"]
-        for backend in backends:
-            log_file = os.path.join(generated_dir, f"{backend}_{iteration}.log")
-
-            sim_command = f"{simulator_path} -f {exe} --backend {backend}"
-            start_time = time.time()
-            sim_stdout, sim_stderr = run_command(sim_command)
-            end_time = time.time()
-            elapsed_time = end_time - start_time
-
-            # Save the output to the logfile
-            with open(log_file, "w", encoding="utf8") as f:
-                f.write(sim_stdout)
-                if sim_stderr:
-                    f.write(f"\nErrors:\n{sim_stderr}")
-
-            print(
-                f"Ran {backend} in {elapsed_time:.2f} s, Output saved to {backend}_{iteration}.log"
-            )
-
-
-if __name__ == "__main__":
-    parser = argparse.ArgumentParser(
-        description="Run simulations with generated test cases."
-    )
-    parser.add_argument("simulator_path", help="Path to the simulator executable.")
-
-    args = parser.parse_args()
-    dhrystone_path = Path(__file__).parent / "dhrystone"
-    main(args.simulator_path, dhrystone_path)

benchmarks/visualize_runtimes.py

@@ -1,86 +0,0 @@
-import argparse
-import os
-import re
-from pathlib import Path
-
-import plotly.express as px
-import yaml
-
-
-def parse_logs(log_dir):
-    results = []
-    for filename in os.listdir(log_dir):
-        if filename.endswith(".log"):
-            filepath = os.path.join(log_dir, filename)
-            with open(filepath, "r", encoding="utf8") as file:
-                for line in file:
-                    if (
-                        "Executed" in line
-                        and "instructions" in line
-                        and "during" in line
-                        and "resulting in" in line
-                    ):
-                        parts = line.split()
-                        instructions = int(parts[3])
-                        time_idx = parts.index("during") + 1
-                        time = int(parts[time_idx].rstrip("ms"))
-                        mips_idx = parts.index("resulting") + 2
-                        mips = float(parts[mips_idx].rstrip("MIPS"))
-                        backend, iterations, _ = re.split(r"[_.]", filename)
-
-                        results.append(
-                            {
-                                "backend": backend,
-                                "run_count": int(iterations),
-                                "instructions": instructions,
-                                "time": time,
-                                "mips": mips,
-                            }
-                        )
-    return results
-
-
-def write_yaml(results, output_file):
-    with open(output_file, "w", encoding="utf8") as file:
-        yaml.dump(results, file)
-
-
-def visualize_mips_over_instructions(yaml_file):
-    # Read data from YAML file
-    with open(yaml_file, "r", encoding="utf8") as file:
-        data = yaml.safe_load(file)
-
-    # Extract instructions and MIPS values
-    run_count = [entry["run_count"] for entry in data]
-    mips = [entry["mips"] for entry in data]
-    backends = [entry["backend"] for entry in data]
-    # Create scatter plot using Plotly Express
-    fig = px.line(
-        x=run_count,
-        y=mips,
-        color=backends,
-        labels={"x": "Dhrystone Iterations", "y": "MIPS", "color": "Backend"},
-        title="MIPS over Amount of Dhrystone Iterations",
-        log_x=True,
-    )
-    fig.show()
-
-
-def main():
-    parser = argparse.ArgumentParser(
-        description="""
-        Parse log files and extract relevant information. Create a 'results.yaml' file and visualize it.
-        Intended to be run after 'dhrystone_run_multiple.py'"""
-    )
-    parser.add_argument("log_dir", help="Path to the directory containing log files.")
-    args = parser.parse_args()
-
-    result_file = Path(__file__).parent / "results.yaml"
-    if not result_file.is_file():
-        results = parse_logs(args.log_dir)
-        write_yaml(results, result_file)
-    visualize_mips_over_instructions(result_file)
-
-
-if __name__ == "__main__":
-    main()

hello-world/.gitignore

@@ -1,2 +1,3 @@
 /hello
 /hello.dis
+build/

hello-world/CMakeLists.txt

@@ -0,0 +1,12 @@
+cmake_minimum_required(VERSION 3.21)
+project(hello-world C)
+set(TARGET hello)
+add_executable(${TARGET} hello.c)
+
+set(BOARD "iss" CACHE STRING "Target board")
+add_subdirectory(../bare-metal-bsp bsp)
+target_link_libraries(${TARGET} PRIVATE bsp)
+
+add_custom_command(TARGET ${TARGET} POST_BUILD
+        COMMAND ${CMAKE_OBJDUMP} -S  ${TARGET}.elf > ${TARGET}.dis
+        COMMENT "Creating disassembly for ${TARGET}")