T-Head developers surely have a different understanding of time CSR and
CLINT's mtime register with SiFive ones, that they did not implement
the mtime register at all -- as shown in openC906 source code, their
time CSR value is just exposed at the top of their processor IP block
and expects an external continous counter, which makes it not
overrideable, and thus mtime register is not implemented, even not for
reading. However, if CLINTEE is not enabled in T-Head's MXSTATUS
extended CSR, these systems still rely on the mtimecmp registers to
generate timer interrupts. This makes it necessary to implement T-Head
C9xx CLINT support in OpenSBI MTIMER driver, which skips implementing
reading mtime register and falls back to default code that reads time
CSR.
Add a quirk into MTIMER driver, which represents a mtime register is
lacking and time CSR value should be used instead.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>
Althoug the MTIMER part of a C9xx CLINT differs from a SiFive one, the
MSWI part is compliant.
Add T-Head C9xx CLINT compatible string to fdt_ipi_mswi code, sharing
the same codepath with SiFive CLINT.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently the context save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.
Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
plic->num_src holds the number of interrupt sources without interrupt
source 0 but the interrupt enable register includes a bit for the
interrupt source 0 in the first word.
Fixes: 415ecf28f7 ("lib: irqchip/plic: Add context save/restore helpers")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
The number of interrupt enable register in words was once correct,
but was wrongly changed to have an off-by-one error since
commit 8c362e7d06 ("lib: irqchip/plic: Factor out a context init function").
Fixes: 8c362e7d06 ("lib: irqchip/plic: Factor out a context init function")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Currently the priority save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.
Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add compatible string for Andestech NCEPLIC100 found on Renesas RZ/Five SoC
which is equipped with AX45MP AndesCore.
While at it drop the comma after the sentinel as it does not make sense to
have a comma after a sentinel, as any new elements must be added before the
sentinel.
dts example (Single-core AX45MP):
soc: soc {
....
plic: interrupt-controller@12c00000 {
compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
#interrupt-cells = <2>;
#address-cells = <0>;
riscv,ndev = <511>;
interrupt-controller;
reg = <0x0 0x12c00000 0 0x400000>;
clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
power-domains = <&cpg>;
resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
};
....
};
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Not all systems have bash at a fixed location like /bin/bash.
FreeBSD, for example, would typically have it at /usr/local/bin/bash.
When building OpenSBI on freebsd system, the build breaks.
Its advisable to use: #!/usr/bin/env bash
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As per section 3.7.2 of RISC-V Privileged Specification,
PMP settings must be synchronized with the virtual memory
system after PMP settings have been written.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If fdt_getprop() returns NULL, this indicates an error. In this case lenp
is set to an error code. But even if lenp = 0 we should not continue.
If fdt_getprop() returns a wider value than we expect this is a separate
error condition.
In both cases the device-tree is invalid.
Addresses-Coverity-ID: 1529703 ("Dereference after null check")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For 'reg->order == __riscv_xlen' the term 'BIT(reg->order)' is undefined.
Addresses-Coverity-ID: 1529706 ("Bad bit shift operation")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
It makes sense to use fdt_match_node() instead of fdt_find_match()
in fw_platform_lookup_special() as we already have the start offset
to search from.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The andes-specific files have been moved to generic platform so we
can drop this line.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Update compile option and platform compatible string for AE350 and
add it to the generic platform list.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
We move andes directory to platform/generic as the necessary fdt
drivers are available, the users can enable the console, timer, ipi,
irqchip and reset devices by adding device tree nodes stated in the
docs/platform/andes-ae350.md.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
The t3 register stores the address of _load_end. If relocation is not
required, it is unnecessary to calculate the address of _load_end.
This can reduce the operation time of two instructions.
Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
cpu_offset and cpu_intc_offset must be int to detect failed invocations of
fdt_node_offset_by_phandle() or fdt_parent_offset().
After determining cpu_offset we have to check this value and not
cpu_intc_offset.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
cpu_offset, cpu_intc_offset must be int to discover failed invocations of
fdt_node_offset_by_phandle() or fdt_parent_offset().
After determining cpu_offset we have to check this value and not
cpu_intc_offset.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
When order is equal to __riscv_xlen, the shift operation will not perform
any operation, which will cause reg->base & (BIT(reg->order) - 1) to always
be 0, and the condition has not been established.
This patch fixes this bug.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If the path where this repo is located contains the platform name on
it, the original Makefile replaced its occurrences from the path making
it an invalid path. This commit prevents this behavior replacing only
the last part of the path as intended.
Signed-off-by: Alejandro Cabrera Aldaya <aldaya@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
I don't know why but `echo -n` didn't work for me. macOS supports
the `-n` option but it doesn't work in the makefile. What it does
instead is it literally writes `-n` to the file and then also
leaves a newline at the end.
I'm using GNU Make 4.4 (`gmake` from Homebrew).
Signed-off-by: KaDiWa <kalle.wachsmuth@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Corrected the same parameter of writel_relaxed in sun20i_d1_riscv_cfg_init
to be u32 for a while and u64 for a while.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Split up sbi_ecall_replace so that each extension is in its individual
file.
Also reorganize the corresponding section in lib/sbi/objects.mk so
that it is grouped by extension, now that the object file targets are
split up.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We fix the following semihosting compile error observed using LLVM:
lib/utils/serial/semihosting.c:158:12: error: result of comparison of constant -1 with expression of type 'char' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
ret = ch > -1 ? ch : -1;
~~ ^ ~~
Fixes: 7f09fba86e ("lib: utils/serial: add semihosting support")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
uart->reg_offset and uart->reg_io_width are only used on uart8250 and
not required on other platforms. Remove for sifive and gaisler.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For each SBI extension, we:
- Add a Kconfig option for it
- Add the extension to sbi_ecall_exts only if the extension is enabled
- Add the corresponding sbi_ecall_* object file only if the extension is
enabled
Special cases are as follows:
- The legacy extensions are lumped together as one 'big' extension, as
has always been the case in OpenSBI code.
- The platform-defined vendor extensions are regarded as one extension.
- The Base extension cannot be disabled.
- sbi_ecall_replace implements multiple extensions, so it's not easy to
avoid linking it in. Enable it always, and use #ifdef to
disable/enable individual extensions.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Instead of hard-coding the list of extensions in C code, use carray to
generate the list of extensions.
Using carray makes adding and removing extensions slightly cleaner. This
also paves the way for using Kconfig to disable unneeded extensions.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add back the missing rules needed to build carray files in lib/sbi. This
allows future usage of carray in lib/sbi.
Fixes: de80e9337d ("Makefile: Compile lib/utils sources separately for each platform")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since
commit 9c07c513aa ("firmware:Remove FW_PAYLOAD_FDT_PATH compile-time option"),
the section where FDT would be embedded in has changed from *.text* to *.rodata*,
but some places in fw_payload.md and fw.md are still *.text*.
This patch updates the document.
Signed-off-by: Yangjie Zhang <pyjmstr@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add cscope support so that running `make cscope` will generate/update
cscope files used for source code browsing, while running `make
distclean` will remove the cscope files.
Also add entry in .gitignore to ignore generated cscope files.
Signed-off-by: Tan En De <ende.tan@linux.starfivetech.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
We update ae350 documentation to add details about platform device tree.
The nodes and their properties must be provided to properly initialize
data of underlying hardware and access their mmio registers.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add domains_init platform hook for Andes AE350, users can add domain
description in device tree and select FDT domain support in Kconfig
to achieve system-level partitioning.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
