setup ultra_trail fw based on bare-metal-bsp
This commit is contained in:
parent
9c0047b3ea
commit
cffa693e29
|
|
@ -2,7 +2,7 @@
|
|||
|
||||
#include "platform.h"
|
||||
|
||||
#ifdef PRCI_BASE_ADDR
|
||||
#ifdef PRCI_CTRL_ADDR
|
||||
#include "fe300prci/fe300prci_driver.h"
|
||||
#include <unistd.h>
|
||||
|
||||
|
|
|
|||
|
|
@ -55,7 +55,7 @@ OBJDUMP := $(TOOL_DIR)$(TRIPLET)-objdump
|
|||
|
||||
|
||||
$(TARGET): $(LINK_OBJS) $(LINK_DEPS)
|
||||
$(LD) $(LINK_OBJS) $(LDFLAGS) $(LIBWRAP) -o $@
|
||||
$(LD) $(LINK_OBJS) $(LDFLAGS) -o $@
|
||||
$(OBJDUMP) -d -S $(TARGET) > $(TARGET).dis
|
||||
|
||||
$(ASM_OBJS): %.o: %.S $(HEADERS)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,81 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef _SIFIVE_HIFIVE1_H
|
||||
#define _SIFIVE_HIFIVE1_H
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
/****************************************************************************
|
||||
* GPIO Connections
|
||||
*****************************************************************************/
|
||||
|
||||
// These are the GPIO bit offsets for the RGB LED on HiFive1 Board.
|
||||
// These are also mapped to RGB LEDs on the Freedom E300 Arty
|
||||
// FPGA
|
||||
// Dev Kit.
|
||||
|
||||
#define RED_LED_OFFSET 22
|
||||
#define GREEN_LED_OFFSET 19
|
||||
#define BLUE_LED_OFFSET 21
|
||||
|
||||
// These are the GPIO bit offsets for the differen digital pins
|
||||
// on the headers for both the HiFive1 Board and the Freedom E300 Arty FPGA Dev Kit.
|
||||
#define PIN_0_OFFSET 16
|
||||
#define PIN_1_OFFSET 17
|
||||
#define PIN_2_OFFSET 18
|
||||
#define PIN_3_OFFSET 19
|
||||
#define PIN_4_OFFSET 20
|
||||
#define PIN_5_OFFSET 21
|
||||
#define PIN_6_OFFSET 22
|
||||
#define PIN_7_OFFSET 23
|
||||
#define PIN_8_OFFSET 0
|
||||
#define PIN_9_OFFSET 1
|
||||
#define PIN_10_OFFSET 2
|
||||
#define PIN_11_OFFSET 3
|
||||
#define PIN_12_OFFSET 4
|
||||
#define PIN_13_OFFSET 5
|
||||
//#define PIN_14_OFFSET 8 //This pin is not connected on either board.
|
||||
#define PIN_15_OFFSET 9
|
||||
#define PIN_16_OFFSET 10
|
||||
#define PIN_17_OFFSET 11
|
||||
#define PIN_18_OFFSET 12
|
||||
#define PIN_19_OFFSET 13
|
||||
|
||||
// These are *PIN* numbers, not
|
||||
// GPIO Offset Numbers.
|
||||
#define PIN_SPI1_SCK (13u)
|
||||
#define PIN_SPI1_MISO (12u)
|
||||
#define PIN_SPI1_MOSI (11u)
|
||||
#define PIN_SPI1_SS0 (10u)
|
||||
#define PIN_SPI1_SS1 (14u)
|
||||
#define PIN_SPI1_SS2 (15u)
|
||||
#define PIN_SPI1_SS3 (16u)
|
||||
|
||||
#define SS_PIN_TO_CS_ID(x) \
|
||||
((x==PIN_SPI1_SS0 ? 0 : \
|
||||
(x==PIN_SPI1_SS1 ? 1 : \
|
||||
(x==PIN_SPI1_SS2 ? 2 : \
|
||||
(x==PIN_SPI1_SS3 ? 3 : \
|
||||
-1)))))
|
||||
|
||||
|
||||
// These buttons are present only on the Freedom E300 Arty Dev Kit.
|
||||
#ifdef HAS_BOARD_BUTTONS
|
||||
#define BUTTON_0_OFFSET 15
|
||||
#define BUTTON_1_OFFSET 30
|
||||
#define BUTTON_2_OFFSET 31
|
||||
|
||||
#define INT_DEVICE_BUTTON_0 (INT_GPIO_BASE + BUTTON_0_OFFSET)
|
||||
#define INT_DEVICE_BUTTON_1 (INT_GPIO_BASE + BUTTON_1_OFFSET)
|
||||
#define INT_DEVICE_BUTTON_2 (INT_GPIO_BASE + BUTTON_2_OFFSET)
|
||||
|
||||
#endif
|
||||
|
||||
#define HAS_HFXOSC 1
|
||||
#define HAS_LFROSC_BYPASS 1
|
||||
|
||||
#define RTC_FREQ 32768
|
||||
|
||||
void write_hex(int fd, unsigned long int hex);
|
||||
|
||||
#endif /* _SIFIVE_HIFIVE1_H */
|
||||
|
|
@ -0,0 +1,157 @@
|
|||
OUTPUT_ARCH( "riscv" )
|
||||
|
||||
ENTRY( _start )
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rxai!w) : ORIGIN = 0x20400000, LENGTH = 512M
|
||||
ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
|
||||
}
|
||||
|
||||
PHDRS
|
||||
{
|
||||
flash PT_LOAD;
|
||||
ram_init PT_LOAD;
|
||||
ram PT_NULL;
|
||||
}
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
__stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
|
||||
|
||||
.init :
|
||||
{
|
||||
KEEP (*(SORT_NONE(.init)))
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.text :
|
||||
{
|
||||
*(.text.unlikely .text.unlikely.*)
|
||||
*(.text.startup .text.startup.*)
|
||||
*(.text .text.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.fini :
|
||||
{
|
||||
KEEP (*(SORT_NONE(.fini)))
|
||||
} >flash AT>flash :flash
|
||||
|
||||
PROVIDE (__etext = .);
|
||||
PROVIDE (_etext = .);
|
||||
PROVIDE (etext = .);
|
||||
|
||||
. = ALIGN(4);
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
|
||||
KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
|
||||
KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.ctors :
|
||||
{
|
||||
/* gcc uses crtbegin.o to find the start of
|
||||
the constructors, so we make sure it is
|
||||
first. Because this is a wildcard, it
|
||||
doesn't matter if the user does not
|
||||
actually link against crtbegin.o; the
|
||||
linker won't look for a file to match a
|
||||
wildcard. The wildcard also means that it
|
||||
doesn't matter which directory crtbegin.o
|
||||
is in. */
|
||||
KEEP (*crtbegin.o(.ctors))
|
||||
KEEP (*crtbegin?.o(.ctors))
|
||||
/* We don't want to include the .ctor section from
|
||||
the crtend.o file until after the sorted ctors.
|
||||
The .ctor section from the crtend file contains the
|
||||
end of ctors marker and it must be last */
|
||||
KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
|
||||
KEEP (*(SORT(.ctors.*)))
|
||||
KEEP (*(.ctors))
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.dtors :
|
||||
{
|
||||
KEEP (*crtbegin.o(.dtors))
|
||||
KEEP (*crtbegin?.o(.dtors))
|
||||
KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
|
||||
KEEP (*(SORT(.dtors.*)))
|
||||
KEEP (*(.dtors))
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.lalign :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE( _data_lma = . );
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.dalign :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE( _data = . );
|
||||
} >ram AT>flash :ram_init
|
||||
|
||||
.data :
|
||||
{
|
||||
*(.rdata)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.r.*)
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
. = ALIGN(8);
|
||||
PROVIDE( __global_pointer$ = . + 0x800 );
|
||||
*(.sdata .sdata.*)
|
||||
*(.gnu.linkonce.s.*)
|
||||
. = ALIGN(8);
|
||||
*(.srodata.cst16)
|
||||
*(.srodata.cst8)
|
||||
*(.srodata.cst4)
|
||||
*(.srodata.cst2)
|
||||
*(.srodata .srodata.*)
|
||||
} >ram AT>flash :ram_init
|
||||
|
||||
. = ALIGN(4);
|
||||
PROVIDE( _edata = . );
|
||||
PROVIDE( edata = . );
|
||||
|
||||
PROVIDE( _fbss = . );
|
||||
PROVIDE( __bss_start = . );
|
||||
.bss :
|
||||
{
|
||||
*(.sbss*)
|
||||
*(.gnu.linkonce.sb.*)
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
} >ram AT>ram :ram
|
||||
|
||||
. = ALIGN(8);
|
||||
PROVIDE( _end = . );
|
||||
PROVIDE( end = . );
|
||||
|
||||
.stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
|
||||
{
|
||||
PROVIDE( _heap_end = . );
|
||||
. = __stack_size;
|
||||
PROVIDE( _sp = . );
|
||||
} >ram AT>ram :ram
|
||||
}
|
||||
|
|
@ -0,0 +1,238 @@
|
|||
#include <stdint.h>
|
||||
#include <stdio.h>
|
||||
#include <unistd.h>
|
||||
|
||||
#include "../hifive1/platform.h"
|
||||
#include "encoding.h"
|
||||
|
||||
extern int main(int argc, char** argv);
|
||||
extern void trap_entry();
|
||||
|
||||
static unsigned long mtime_lo(void)
|
||||
{
|
||||
return *(volatile unsigned long *)(CLINT_CTRL_ADDR + CLINT_MTIME);
|
||||
}
|
||||
|
||||
#ifdef __riscv32
|
||||
|
||||
static uint32_t mtime_hi(void)
|
||||
{
|
||||
return *(volatile uint32_t *)(CLINT_CTRL_ADDR + CLINT_MTIME + 4);
|
||||
}
|
||||
|
||||
uint64_t get_timer_value()
|
||||
{
|
||||
while (1) {
|
||||
uint32_t hi = mtime_hi();
|
||||
uint32_t lo = mtime_lo();
|
||||
if (hi == mtime_hi())
|
||||
return ((uint64_t)hi << 32) | lo;
|
||||
}
|
||||
}
|
||||
|
||||
#else /* __riscv32 */
|
||||
|
||||
uint64_t get_timer_value()
|
||||
{
|
||||
return mtime_lo();
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
unsigned long get_timer_freq()
|
||||
{
|
||||
return 32768;
|
||||
}
|
||||
|
||||
static void use_hfrosc(int div, int trim)
|
||||
{
|
||||
// Make sure the HFROSC is running at its default setting
|
||||
PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1));
|
||||
while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0) ;
|
||||
PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1);
|
||||
}
|
||||
|
||||
static void use_pll(int refsel, int bypass, int r, int f, int q)
|
||||
{
|
||||
// Ensure that we aren't running off the PLL before we mess with it.
|
||||
if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) {
|
||||
// Make sure the HFROSC is running at its default setting
|
||||
use_hfrosc(4, 16);
|
||||
}
|
||||
|
||||
// Set PLL Source to be HFXOSC if available.
|
||||
uint32_t config_value = 0;
|
||||
|
||||
config_value |= PLL_REFSEL(refsel);
|
||||
|
||||
if (bypass) {
|
||||
// Bypass
|
||||
config_value |= PLL_BYPASS(1);
|
||||
|
||||
PRCI_REG(PRCI_PLLCFG) = config_value;
|
||||
|
||||
// If we don't have an HFXTAL, this doesn't really matter.
|
||||
// Set our Final output divide to divide-by-1:
|
||||
PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
|
||||
} else {
|
||||
// In case we are executing from QSPI,
|
||||
// (which is quite likely) we need to
|
||||
// set the QSPI clock divider appropriately
|
||||
// before boosting the clock frequency.
|
||||
|
||||
// Div = f_sck/2
|
||||
SPI0_REG(SPI_REG_SCKDIV) = 8;
|
||||
|
||||
// Set DIV Settings for PLL
|
||||
// Both HFROSC and HFXOSC are modeled as ideal
|
||||
// 16MHz sources (assuming dividers are set properly for
|
||||
// HFROSC).
|
||||
// (Legal values of f_REF are 6-48MHz)
|
||||
|
||||
// Set DIVR to divide-by-2 to get 8MHz frequency
|
||||
// (legal values of f_R are 6-12 MHz)
|
||||
|
||||
config_value |= PLL_BYPASS(1);
|
||||
config_value |= PLL_R(r);
|
||||
|
||||
// Set DIVF to get 512Mhz frequncy
|
||||
// There is an implied multiply-by-2, 16Mhz.
|
||||
// So need to write 32-1
|
||||
// (legal values of f_F are 384-768 MHz)
|
||||
config_value |= PLL_F(f);
|
||||
|
||||
// Set DIVQ to divide-by-2 to get 256 MHz frequency
|
||||
// (legal values of f_Q are 50-400Mhz)
|
||||
config_value |= PLL_Q(q);
|
||||
|
||||
// Set our Final output divide to divide-by-1:
|
||||
PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
|
||||
|
||||
PRCI_REG(PRCI_PLLCFG) = config_value;
|
||||
|
||||
// Un-Bypass the PLL.
|
||||
PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1);
|
||||
|
||||
// Wait for PLL Lock
|
||||
// Note that the Lock signal can be glitchy.
|
||||
// Need to wait 100 us
|
||||
// RTC is running at 32kHz.
|
||||
// So wait 4 ticks of RTC.
|
||||
uint32_t now = mtime_lo();
|
||||
while (mtime_lo() - now < 4) ;
|
||||
|
||||
// Now it is safe to check for PLL Lock
|
||||
while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0) ;
|
||||
}
|
||||
|
||||
// Switch over to PLL Clock source
|
||||
PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1);
|
||||
}
|
||||
|
||||
static void use_default_clocks()
|
||||
{
|
||||
// Turn off the LFROSC
|
||||
AON_REG(AON_LFROSC) &= ~ROSC_EN(1);
|
||||
|
||||
// Use HFROSC
|
||||
use_hfrosc(4, 16);
|
||||
}
|
||||
|
||||
static unsigned long __attribute__((noinline)) measure_cpu_freq(size_t n)
|
||||
{
|
||||
unsigned long start_mtime, delta_mtime;
|
||||
unsigned long mtime_freq = get_timer_freq();
|
||||
|
||||
// Don't start measuruing until we see an mtime tick
|
||||
unsigned long tmp = mtime_lo();
|
||||
do {
|
||||
start_mtime = mtime_lo();
|
||||
} while (start_mtime == tmp);
|
||||
|
||||
unsigned long start_mcycle = read_csr(mcycle);
|
||||
|
||||
do {
|
||||
delta_mtime = mtime_lo() - start_mtime;
|
||||
} while (delta_mtime < n);
|
||||
|
||||
unsigned long delta_mcycle = read_csr(mcycle) - start_mcycle;
|
||||
|
||||
return (delta_mcycle / delta_mtime) * mtime_freq
|
||||
+ ((delta_mcycle % delta_mtime) * mtime_freq) / delta_mtime;
|
||||
}
|
||||
|
||||
unsigned long get_cpu_freq()
|
||||
{
|
||||
static uint32_t cpu_freq;
|
||||
|
||||
if (!cpu_freq) {
|
||||
// warm up I$
|
||||
measure_cpu_freq(1);
|
||||
// measure for real
|
||||
cpu_freq = measure_cpu_freq(10);
|
||||
}
|
||||
|
||||
return cpu_freq;
|
||||
}
|
||||
|
||||
static void uart_init(size_t baud_rate)
|
||||
{
|
||||
GPIO_REG(GPIO_IOF_SEL) &= ~IOF0_UART0_MASK;
|
||||
GPIO_REG(GPIO_IOF_EN) |= IOF0_UART0_MASK;
|
||||
UART0_REG(UART_REG_DIV) = get_cpu_freq() / baud_rate - 1;
|
||||
UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
|
||||
}
|
||||
|
||||
|
||||
|
||||
#ifdef USE_PLIC
|
||||
extern void handle_m_ext_interrupt();
|
||||
#endif
|
||||
|
||||
#ifdef USE_M_TIME
|
||||
extern void handle_m_time_interrupt();
|
||||
#endif
|
||||
|
||||
uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
|
||||
{
|
||||
if (0){
|
||||
#ifdef USE_PLIC
|
||||
// External Machine-Level interrupt from PLIC
|
||||
} else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
|
||||
handle_m_ext_interrupt();
|
||||
#endif
|
||||
#ifdef USE_M_TIME
|
||||
// External Machine-Level interrupt from PLIC
|
||||
} else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
|
||||
handle_m_time_interrupt();
|
||||
#endif
|
||||
}
|
||||
else {
|
||||
write(1, "trap\n", 5);
|
||||
_exit(1 + mcause);
|
||||
}
|
||||
return epc;
|
||||
}
|
||||
|
||||
void _init()
|
||||
{
|
||||
|
||||
#ifndef NO_INIT
|
||||
use_default_clocks();
|
||||
use_pll(0, 0, 1, 31, 1);
|
||||
uart_init(115200);
|
||||
|
||||
printf("core freq at %d Hz\n", get_cpu_freq());
|
||||
|
||||
write_csr(mtvec, &trap_entry);
|
||||
if (read_csr(misa) & (1 << ('F' - 'A'))) { // if F extension is present
|
||||
write_csr(mstatus, MSTATUS_FS); // allow FPU instructions without trapping
|
||||
write_csr(fcsr, 0); // initialize rounding mode, undefined at reset
|
||||
}
|
||||
#endif
|
||||
|
||||
}
|
||||
|
||||
void _fini()
|
||||
{
|
||||
}
|
||||
|
|
@ -0,0 +1,169 @@
|
|||
OUTPUT_ARCH( "riscv" )
|
||||
|
||||
ENTRY( _start )
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rxai!w) : ORIGIN = 0x20400000, LENGTH = 512M
|
||||
ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 512K
|
||||
}
|
||||
|
||||
PHDRS
|
||||
{
|
||||
flash PT_LOAD;
|
||||
ram_init PT_LOAD;
|
||||
ram PT_NULL;
|
||||
}
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
__stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
|
||||
|
||||
.init :
|
||||
{
|
||||
KEEP (*(SORT_NONE(.init)))
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.text :
|
||||
{
|
||||
*(.text.unlikely .text.unlikely.*)
|
||||
*(.text.startup .text.startup.*)
|
||||
*(.text .text.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.fini :
|
||||
{
|
||||
KEEP (*(SORT_NONE(.fini)))
|
||||
} >flash AT>flash :flash
|
||||
|
||||
PROVIDE (__etext = .);
|
||||
PROVIDE (_etext = .);
|
||||
PROVIDE (etext = .);
|
||||
|
||||
.rodata :
|
||||
{
|
||||
*(.rdata)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.r.*)
|
||||
} >flash AT>flash :flash
|
||||
|
||||
. = ALIGN(4);
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
|
||||
KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
|
||||
KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.ctors :
|
||||
{
|
||||
/* gcc uses crtbegin.o to find the start of
|
||||
the constructors, so we make sure it is
|
||||
first. Because this is a wildcard, it
|
||||
doesn't matter if the user does not
|
||||
actually link against crtbegin.o; the
|
||||
linker won't look for a file to match a
|
||||
wildcard. The wildcard also means that it
|
||||
doesn't matter which directory crtbegin.o
|
||||
is in. */
|
||||
KEEP (*crtbegin.o(.ctors))
|
||||
KEEP (*crtbegin?.o(.ctors))
|
||||
/* We don't want to include the .ctor section from
|
||||
the crtend.o file until after the sorted ctors.
|
||||
The .ctor section from the crtend file contains the
|
||||
end of ctors marker and it must be last */
|
||||
KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
|
||||
KEEP (*(SORT(.ctors.*)))
|
||||
KEEP (*(.ctors))
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.dtors :
|
||||
{
|
||||
KEEP (*crtbegin.o(.dtors))
|
||||
KEEP (*crtbegin?.o(.dtors))
|
||||
KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
|
||||
KEEP (*(SORT(.dtors.*)))
|
||||
KEEP (*(.dtors))
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.except :
|
||||
{
|
||||
*(.gcc_except_table.*)
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.lalign :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE( _data_lma = . );
|
||||
} >flash AT>flash :flash
|
||||
|
||||
.dalign :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE( _data = . );
|
||||
} >ram AT>flash :ram_init
|
||||
|
||||
.data :
|
||||
{
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
. = ALIGN(8);
|
||||
PROVIDE( __global_pointer$ = . + 0x800 );
|
||||
*(.sdata .sdata.*)
|
||||
*(.gnu.linkonce.s.*)
|
||||
. = ALIGN(8);
|
||||
*(.srodata.cst16)
|
||||
*(.srodata.cst8)
|
||||
*(.srodata.cst4)
|
||||
*(.srodata.cst2)
|
||||
*(.srodata .srodata.*)
|
||||
} >ram AT>flash :ram_init
|
||||
|
||||
. = ALIGN(4);
|
||||
PROVIDE( _edata = . );
|
||||
PROVIDE( edata = . );
|
||||
|
||||
PROVIDE( _fbss = . );
|
||||
PROVIDE( __bss_start = . );
|
||||
.bss :
|
||||
{
|
||||
*(.sbss*)
|
||||
*(.gnu.linkonce.sb.*)
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
. = ALIGN(4);
|
||||
} >ram AT>ram :ram
|
||||
|
||||
. = ALIGN(8);
|
||||
PROVIDE( _end = . );
|
||||
PROVIDE( end = . );
|
||||
|
||||
.stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
|
||||
{
|
||||
PROVIDE( _heap_end = . );
|
||||
. = __stack_size;
|
||||
PROVIDE( _sp = . );
|
||||
} >ram AT>ram :ram
|
||||
|
||||
PROVIDE( tohost = 0xfffffff0 );
|
||||
PROVIDE( fromhost = 0xfffffff8 );
|
||||
}
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
adapter_khz 10000
|
||||
|
||||
interface ftdi
|
||||
ftdi_device_desc "Dual RS232-HS"
|
||||
ftdi_vid_pid 0x0403 0x6010
|
||||
|
||||
ftdi_layout_init 0x0008 0x001b
|
||||
ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
|
||||
|
||||
#Reset Stretcher logic on FE310 is ~1 second long
|
||||
#This doesn't apply if you use
|
||||
# ftdi_set_signal, but still good to document
|
||||
#adapter_nsrst_delay 1500
|
||||
|
||||
set _CHIPNAME riscv
|
||||
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
|
||||
|
||||
set _TARGETNAME $_CHIPNAME.cpu
|
||||
target create $_TARGETNAME riscv -chain-position $_TARGETNAME
|
||||
$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
|
||||
|
||||
flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
|
||||
init
|
||||
#reset -- This type of reset is not implemented yet
|
||||
if {[ info exists pulse_srst]} {
|
||||
ftdi_set_signal nSRST 0
|
||||
ftdi_set_signal nSRST z
|
||||
#Wait for the reset stretcher
|
||||
#It will work without this, but
|
||||
#will incur lots of delays for later commands.
|
||||
sleep 1500
|
||||
}
|
||||
halt
|
||||
#flash protect 0 64 last off
|
||||
|
|
@ -0,0 +1,133 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef _SIFIVE_PLATFORM_H
|
||||
#define _SIFIVE_PLATFORM_H
|
||||
|
||||
// Some things missing from the official encoding.h
|
||||
#define MCAUSE_INT 0x80000000
|
||||
#define MCAUSE_CAUSE 0x7FFFFFFF
|
||||
|
||||
#include "sifive/const.h"
|
||||
#include "sifive/devices/aon.h"
|
||||
#include "sifive/devices/clint.h"
|
||||
#include "sifive/devices/gpio.h"
|
||||
#include "sifive/devices/otp.h"
|
||||
#include "sifive/devices/plic.h"
|
||||
#include "sifive/devices/prci.h"
|
||||
#include "sifive/devices/pwm.h"
|
||||
#include "sifive/devices/spi.h"
|
||||
#include "sifive/devices/uart.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Platform definitions
|
||||
*****************************************************************************/
|
||||
|
||||
// Memory map
|
||||
#define MASKROM_MEM_ADDR _AC(0x00001000,UL)
|
||||
#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
|
||||
#define OTP_MEM_ADDR _AC(0x00020000,UL)
|
||||
#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
|
||||
#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
|
||||
#define AON_CTRL_ADDR _AC(0x10000000,UL)
|
||||
#define PRCI_CTRL_ADDR _AC(0x10008000,UL)
|
||||
#define OTP_CTRL_ADDR _AC(0x10010000,UL)
|
||||
#define GPIO_CTRL_ADDR _AC(0x10012000,UL)
|
||||
#define UART0_CTRL_ADDR _AC(0x10013000,UL)
|
||||
#define SPI0_CTRL_ADDR _AC(0x10014000,UL)
|
||||
#define PWM0_CTRL_ADDR _AC(0x10015000,UL)
|
||||
#define UART1_CTRL_ADDR _AC(0x10023000,UL)
|
||||
#define SPI1_CTRL_ADDR _AC(0x10024000,UL)
|
||||
#define PWM1_CTRL_ADDR _AC(0x10025000,UL)
|
||||
#define SPI2_CTRL_ADDR _AC(0x10034000,UL)
|
||||
#define PWM2_CTRL_ADDR _AC(0x10035000,UL)
|
||||
#define SPI0_MEM_ADDR _AC(0x20000000,UL)
|
||||
#define MEM_CTRL_ADDR _AC(0x80000000,UL)
|
||||
|
||||
// IOF masks
|
||||
#define IOF0_SPI1_MASK _AC(0x000007FC,UL)
|
||||
#define SPI11_NUM_SS (4)
|
||||
#define IOF_SPI1_SS0 (2u)
|
||||
#define IOF_SPI1_SS1 (8u)
|
||||
#define IOF_SPI1_SS2 (9u)
|
||||
#define IOF_SPI1_SS3 (10u)
|
||||
#define IOF_SPI1_MOSI (3u)
|
||||
#define IOF_SPI1_MISO (4u)
|
||||
#define IOF_SPI1_SCK (5u)
|
||||
#define IOF_SPI1_DQ0 (3u)
|
||||
#define IOF_SPI1_DQ1 (4u)
|
||||
#define IOF_SPI1_DQ2 (6u)
|
||||
#define IOF_SPI1_DQ3 (7u)
|
||||
|
||||
#define IOF0_SPI2_MASK _AC(0xFC000000,UL)
|
||||
#define SPI2_NUM_SS (1)
|
||||
#define IOF_SPI2_SS0 (26u)
|
||||
#define IOF_SPI2_MOSI (27u)
|
||||
#define IOF_SPI2_MISO (28u)
|
||||
#define IOF_SPI2_SCK (29u)
|
||||
#define IOF_SPI2_DQ0 (27u)
|
||||
#define IOF_SPI2_DQ1 (28u)
|
||||
#define IOF_SPI2_DQ2 (30u)
|
||||
#define IOF_SPI2_DQ3 (31u)
|
||||
|
||||
//#define IOF0_I2C_MASK _AC(0x00003000,UL)
|
||||
|
||||
#define IOF0_UART0_MASK _AC(0x00030000, UL)
|
||||
#define IOF_UART0_RX (16u)
|
||||
#define IOF_UART0_TX (17u)
|
||||
|
||||
#define IOF0_UART1_MASK _AC(0x03000000, UL)
|
||||
#define IOF_UART1_RX (24u)
|
||||
#define IOF_UART1_TX (25u)
|
||||
|
||||
#define IOF1_PWM0_MASK _AC(0x0000000F, UL)
|
||||
#define IOF1_PWM1_MASK _AC(0x00780000, UL)
|
||||
#define IOF1_PWM2_MASK _AC(0x00003C00, UL)
|
||||
|
||||
// Interrupt numbers
|
||||
#define INT_RESERVED 0
|
||||
#define INT_WDOGCMP 1
|
||||
#define INT_RTCCMP 2
|
||||
#define INT_UART0_BASE 3
|
||||
#define INT_UART1_BASE 4
|
||||
#define INT_SPI0_BASE 5
|
||||
#define INT_SPI1_BASE 6
|
||||
#define INT_SPI2_BASE 7
|
||||
#define INT_GPIO_BASE 8
|
||||
#define INT_PWM0_BASE 40
|
||||
#define INT_PWM1_BASE 44
|
||||
#define INT_PWM2_BASE 48
|
||||
|
||||
// Helper functions
|
||||
#define _REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
|
||||
#define _REG32P(p, i) ((volatile uint32_t *) ((p) + (i)))
|
||||
#define AON_REG(offset) _REG32(AON_CTRL_ADDR, offset)
|
||||
#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
|
||||
#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
|
||||
#define OTP_REG(offset) _REG32(OTP_CTRL_ADDR, offset)
|
||||
#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
|
||||
#define PRCI_REG(offset) _REG32(PRCI_CTRL_ADDR, offset)
|
||||
#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
|
||||
#define PWM1_REG(offset) _REG32(PWM1_CTRL_ADDR, offset)
|
||||
#define PWM2_REG(offset) _REG32(PWM2_CTRL_ADDR, offset)
|
||||
#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
|
||||
#define SPI1_REG(offset) _REG32(SPI1_CTRL_ADDR, offset)
|
||||
#define SPI2_REG(offset) _REG32(SPI2_CTRL_ADDR, offset)
|
||||
#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
|
||||
#define UART1_REG(offset) _REG32(UART1_CTRL_ADDR, offset)
|
||||
|
||||
// Misc
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define NUM_GPIO 32
|
||||
|
||||
#define PLIC_NUM_INTERRUPTS 52
|
||||
#define PLIC_NUM_PRIORITIES 7
|
||||
|
||||
#include "hifive1.h"
|
||||
|
||||
unsigned long get_cpu_freq(void);
|
||||
unsigned long get_timer_freq(void);
|
||||
uint64_t get_timer_value(void);
|
||||
|
||||
#endif /* _SIFIVE_PLATFORM_H */
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
# Describes the CPU on this board to the rest of the SDK.
|
||||
RISCV_ARCH := rv32imac
|
||||
RISCV_ABI := ilp32
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
/*
|
||||
* bsp.h
|
||||
*
|
||||
* Created on: 30.07.2018
|
||||
* Author: eyck
|
||||
*/
|
||||
|
||||
#ifndef BSP_H_
|
||||
#define BSP_H_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
#include <fe300prci/fe300prci_driver.h>
|
||||
#include <platform.h>
|
||||
#include <encoding.h>
|
||||
extern void trap_entry();
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* BSP_H_ */
|
||||
|
|
@ -0,0 +1,36 @@
|
|||
// See LICENSE for license details.
|
||||
#ifndef _RISCV_BITS_H
|
||||
#define _RISCV_BITS_H
|
||||
|
||||
#define likely(x) __builtin_expect((x), 1)
|
||||
#define unlikely(x) __builtin_expect((x), 0)
|
||||
|
||||
#define ROUNDUP(a, b) ((((a)-1)/(b)+1)*(b))
|
||||
#define ROUNDDOWN(a, b) ((a)/(b)*(b))
|
||||
|
||||
#define MAX(a, b) ((a) > (b) ? (a) : (b))
|
||||
#define MIN(a, b) ((a) < (b) ? (a) : (b))
|
||||
#define CLAMP(a, lo, hi) MIN(MAX(a, lo), hi)
|
||||
|
||||
#define EXTRACT_FIELD(val, which) (((val) & (which)) / ((which) & ~((which)-1)))
|
||||
#define INSERT_FIELD(val, which, fieldval) (((val) & ~(which)) | ((fieldval) * ((which) & ~((which)-1))))
|
||||
|
||||
#define STR(x) XSTR(x)
|
||||
#define XSTR(x) #x
|
||||
|
||||
#if __riscv_xlen == 64
|
||||
# define SLL32 sllw
|
||||
# define STORE sd
|
||||
# define LOAD ld
|
||||
# define LWU lwu
|
||||
# define LOG_REGBYTES 3
|
||||
#else
|
||||
# define SLL32 sll
|
||||
# define STORE sw
|
||||
# define LOAD lw
|
||||
# define LWU lw
|
||||
# define LOG_REGBYTES 2
|
||||
#endif
|
||||
#define REGBYTES (1 << LOG_REGBYTES)
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
// See LICENSE for license details.
|
||||
/* Derived from <linux/const.h> */
|
||||
|
||||
#ifndef _SIFIVE_CONST_H
|
||||
#define _SIFIVE_CONST_H
|
||||
|
||||
#ifdef __ASSEMBLER__
|
||||
#define _AC(X,Y) X
|
||||
#define _AT(T,X) X
|
||||
#else
|
||||
#define _AC(X,Y) (X##Y)
|
||||
#define _AT(T,X) ((T)(X))
|
||||
#endif /* !__ASSEMBLER__*/
|
||||
|
||||
#define _BITUL(x) (_AC(1,UL) << (x))
|
||||
#define _BITULL(x) (_AC(1,ULL) << (x))
|
||||
|
||||
#endif /* _SIFIVE_CONST_H */
|
||||
|
|
@ -0,0 +1,88 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef _SIFIVE_AON_H
|
||||
#define _SIFIVE_AON_H
|
||||
|
||||
/* Register offsets */
|
||||
|
||||
#define AON_WDOGCFG 0x000
|
||||
#define AON_WDOGCOUNT 0x008
|
||||
#define AON_WDOGS 0x010
|
||||
#define AON_WDOGFEED 0x018
|
||||
#define AON_WDOGKEY 0x01C
|
||||
#define AON_WDOGCMP 0x020
|
||||
|
||||
#define AON_RTCCFG 0x040
|
||||
#define AON_RTCLO 0x048
|
||||
#define AON_RTCHI 0x04C
|
||||
#define AON_RTCS 0x050
|
||||
#define AON_RTCCMP 0x060
|
||||
|
||||
#define AON_BACKUP0 0x080
|
||||
#define AON_BACKUP1 0x084
|
||||
#define AON_BACKUP2 0x088
|
||||
#define AON_BACKUP3 0x08C
|
||||
#define AON_BACKUP4 0x090
|
||||
#define AON_BACKUP5 0x094
|
||||
#define AON_BACKUP6 0x098
|
||||
#define AON_BACKUP7 0x09C
|
||||
#define AON_BACKUP8 0x0A0
|
||||
#define AON_BACKUP9 0x0A4
|
||||
#define AON_BACKUP10 0x0A8
|
||||
#define AON_BACKUP11 0x0AC
|
||||
#define AON_BACKUP12 0x0B0
|
||||
#define AON_BACKUP13 0x0B4
|
||||
#define AON_BACKUP14 0x0B8
|
||||
#define AON_BACKUP15 0x0BC
|
||||
|
||||
#define AON_PMUWAKEUPI0 0x100
|
||||
#define AON_PMUWAKEUPI1 0x104
|
||||
#define AON_PMUWAKEUPI2 0x108
|
||||
#define AON_PMUWAKEUPI3 0x10C
|
||||
#define AON_PMUWAKEUPI4 0x110
|
||||
#define AON_PMUWAKEUPI5 0x114
|
||||
#define AON_PMUWAKEUPI6 0x118
|
||||
#define AON_PMUWAKEUPI7 0x11C
|
||||
#define AON_PMUSLEEPI0 0x120
|
||||
#define AON_PMUSLEEPI1 0x124
|
||||
#define AON_PMUSLEEPI2 0x128
|
||||
#define AON_PMUSLEEPI3 0x12C
|
||||
#define AON_PMUSLEEPI4 0x130
|
||||
#define AON_PMUSLEEPI5 0x134
|
||||
#define AON_PMUSLEEPI6 0x138
|
||||
#define AON_PMUSLEEPI7 0x13C
|
||||
#define AON_PMUIE 0x140
|
||||
#define AON_PMUCAUSE 0x144
|
||||
#define AON_PMUSLEEP 0x148
|
||||
#define AON_PMUKEY 0x14C
|
||||
|
||||
#define AON_LFROSC 0x070
|
||||
/* Constants */
|
||||
|
||||
#define AON_WDOGKEY_VALUE 0x51F15E
|
||||
#define AON_WDOGFEED_VALUE 0xD09F00D
|
||||
|
||||
#define AON_WDOGCFG_SCALE 0x0000000F
|
||||
#define AON_WDOGCFG_RSTEN 0x00000100
|
||||
#define AON_WDOGCFG_ZEROCMP 0x00000200
|
||||
#define AON_WDOGCFG_ENALWAYS 0x00001000
|
||||
#define AON_WDOGCFG_ENCOREAWAKE 0x00002000
|
||||
#define AON_WDOGCFG_CMPIP 0x10000000
|
||||
|
||||
#define AON_RTCCFG_SCALE 0x0000000F
|
||||
#define AON_RTCCFG_ENALWAYS 0x00001000
|
||||
#define AON_RTCCFG_CMPIP 0x10000000
|
||||
|
||||
#define AON_WAKEUPCAUSE_RESET 0x00
|
||||
#define AON_WAKEUPCAUSE_RTC 0x01
|
||||
#define AON_WAKEUPCAUSE_DWAKEUP 0x02
|
||||
#define AON_WAKEUPCAUSE_AWAKEUP 0x03
|
||||
|
||||
#define AON_RESETCAUSE_POWERON 0x0000
|
||||
#define AON_RESETCAUSE_EXTERNAL 0x0100
|
||||
#define AON_RESETCAUSE_WATCHDOG 0x0200
|
||||
|
||||
#define AON_PMUCAUSE_WAKEUPCAUSE 0x00FF
|
||||
#define AON_PMUCAUSE_RESETCAUSE 0xFF00
|
||||
|
||||
#endif /* _SIFIVE_AON_H */
|
||||
|
|
@ -0,0 +1,30 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef _SIFIVE_CLIC_H
|
||||
#define _SIFIVE_CLIC_H
|
||||
|
||||
#define CLIC_HART0 0x00800000
|
||||
#define CLIC_MSIP 0x0000
|
||||
#define CLIC_MSIP_size 0x4
|
||||
#define CLIC_MTIMECMP 0x4000
|
||||
#define CLIC_MTIMECMP_size 0x8
|
||||
#define CLIC_MTIME 0xBFF8
|
||||
#define CLIC_MTIME_size 0x8
|
||||
|
||||
#define CLIC_INTIP 0x000
|
||||
#define CLIC_INTIE 0x400
|
||||
#define CLIC_INTCFG 0x800
|
||||
#define CLIC_CFG 0xc00
|
||||
|
||||
// These interrupt IDs are consistent across old and new mtvec modes
|
||||
#define SSIPID 1
|
||||
#define MSIPID 3
|
||||
#define STIPID 5
|
||||
#define MTIPID 7
|
||||
#define SEIPID 9
|
||||
#define MEIPID 11
|
||||
#define CSIPID 12
|
||||
#define LOCALINTIDBASE 16
|
||||
|
||||
|
||||
#endif /* _SIFIVE_CLIC_H */
|
||||
|
|
@ -0,0 +1,14 @@
|
|||
// See LICENSE for license details
|
||||
|
||||
#ifndef _SIFIVE_CLINT_H
|
||||
#define _SIFIVE_CLINT_H
|
||||
|
||||
|
||||
#define CLINT_MSIP 0x0000
|
||||
#define CLINT_MSIP_size 0x4
|
||||
#define CLINT_MTIMECMP 0x4000
|
||||
#define CLINT_MTIMECMP_size 0x8
|
||||
#define CLINT_MTIME 0xBFF8
|
||||
#define CLINT_MTIME_size 0x8
|
||||
|
||||
#endif /* _SIFIVE_CLINT_H */
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef _SIFIVE_GPIO_H
|
||||
#define _SIFIVE_GPIO_H
|
||||
|
||||
#define GPIO_INPUT_VAL (0x00)
|
||||
#define GPIO_INPUT_EN (0x04)
|
||||
#define GPIO_OUTPUT_EN (0x08)
|
||||
#define GPIO_OUTPUT_VAL (0x0C)
|
||||
#define GPIO_PULLUP_EN (0x10)
|
||||
#define GPIO_DRIVE (0x14)
|
||||
#define GPIO_RISE_IE (0x18)
|
||||
#define GPIO_RISE_IP (0x1C)
|
||||
#define GPIO_FALL_IE (0x20)
|
||||
#define GPIO_FALL_IP (0x24)
|
||||
#define GPIO_HIGH_IE (0x28)
|
||||
#define GPIO_HIGH_IP (0x2C)
|
||||
#define GPIO_LOW_IE (0x30)
|
||||
#define GPIO_LOW_IP (0x34)
|
||||
#define GPIO_IOF_EN (0x38)
|
||||
#define GPIO_IOF_SEL (0x3C)
|
||||
#define GPIO_OUTPUT_XOR (0x40)
|
||||
|
||||
#endif /* _SIFIVE_GPIO_H */
|
||||
|
|
@ -0,0 +1,23 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef _SIFIVE_OTP_H
|
||||
#define _SIFIVE_OTP_H
|
||||
|
||||
/* Register offsets */
|
||||
|
||||
#define OTP_LOCK 0x00
|
||||
#define OTP_CK 0x04
|
||||
#define OTP_OE 0x08
|
||||
#define OTP_SEL 0x0C
|
||||
#define OTP_WE 0x10
|
||||
#define OTP_MR 0x14
|
||||
#define OTP_MRR 0x18
|
||||
#define OTP_MPP 0x1C
|
||||
#define OTP_VRREN 0x20
|
||||
#define OTP_VPPEN 0x24
|
||||
#define OTP_A 0x28
|
||||
#define OTP_D 0x2C
|
||||
#define OTP_Q 0x30
|
||||
#define OTP_READ_TIMINGS 0x34
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,31 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef PLIC_H
|
||||
#define PLIC_H
|
||||
|
||||
#include <sifive/const.h>
|
||||
|
||||
// 32 bits per source
|
||||
#define PLIC_PRIORITY_OFFSET _AC(0x0000,UL)
|
||||
#define PLIC_PRIORITY_SHIFT_PER_SOURCE 2
|
||||
// 1 bit per source (1 address)
|
||||
#define PLIC_PENDING_OFFSET _AC(0x1000,UL)
|
||||
#define PLIC_PENDING_SHIFT_PER_SOURCE 0
|
||||
|
||||
//0x80 per target
|
||||
#define PLIC_ENABLE_OFFSET _AC(0x2000,UL)
|
||||
#define PLIC_ENABLE_SHIFT_PER_TARGET 7
|
||||
|
||||
|
||||
#define PLIC_THRESHOLD_OFFSET _AC(0x200000,UL)
|
||||
#define PLIC_CLAIM_OFFSET _AC(0x200004,UL)
|
||||
#define PLIC_THRESHOLD_SHIFT_PER_TARGET 12
|
||||
#define PLIC_CLAIM_SHIFT_PER_TARGET 12
|
||||
|
||||
#define PLIC_MAX_SOURCE 1023
|
||||
#define PLIC_SOURCE_MASK 0x3FF
|
||||
|
||||
#define PLIC_MAX_TARGET 15871
|
||||
#define PLIC_TARGET_MASK 0x3FFF
|
||||
|
||||
#endif /* PLIC_H */
|
||||
|
|
@ -0,0 +1,56 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef _SIFIVE_PRCI_H
|
||||
#define _SIFIVE_PRCI_H
|
||||
|
||||
/* Register offsets */
|
||||
|
||||
#define PRCI_HFROSCCFG (0x0000)
|
||||
#define PRCI_HFXOSCCFG (0x0004)
|
||||
#define PRCI_PLLCFG (0x0008)
|
||||
#define PRCI_PLLDIV (0x000C)
|
||||
#define PRCI_PROCMONCFG (0x00F0)
|
||||
|
||||
/* Fields */
|
||||
#define ROSC_DIV(x) (((x) & 0x2F) << 0 )
|
||||
#define ROSC_TRIM(x) (((x) & 0x1F) << 16)
|
||||
#define ROSC_EN(x) (((x) & 0x1 ) << 30)
|
||||
#define ROSC_RDY(x) (((x) & 0x1 ) << 31)
|
||||
|
||||
#define XOSC_EN(x) (((x) & 0x1) << 30)
|
||||
#define XOSC_RDY(x) (((x) & 0x1) << 31)
|
||||
|
||||
#define PLL_R(x) (((x) & 0x7) << 0)
|
||||
// single reserved bit for F LSB.
|
||||
#define PLL_F(x) (((x) & 0x3F) << 4)
|
||||
#define PLL_Q(x) (((x) & 0x3) << 10)
|
||||
#define PLL_SEL(x) (((x) & 0x1) << 16)
|
||||
#define PLL_REFSEL(x) (((x) & 0x1) << 17)
|
||||
#define PLL_BYPASS(x) (((x) & 0x1) << 18)
|
||||
#define PLL_LOCK(x) (((x) & 0x1) << 31)
|
||||
|
||||
#define PLL_R_default 0x1
|
||||
#define PLL_F_default 0x1F
|
||||
#define PLL_Q_default 0x3
|
||||
|
||||
#define PLL_REFSEL_HFROSC 0x0
|
||||
#define PLL_REFSEL_HFXOSC 0x1
|
||||
|
||||
#define PLL_SEL_HFROSC 0x0
|
||||
#define PLL_SEL_PLL 0x1
|
||||
|
||||
#define PLL_FINAL_DIV(x) (((x) & 0x3F) << 0)
|
||||
#define PLL_FINAL_DIV_BY_1(x) (((x) & 0x1 ) << 8)
|
||||
|
||||
#define PROCMON_DIV(x) (((x) & 0x1F) << 0)
|
||||
#define PROCMON_TRIM(x) (((x) & 0x1F) << 8)
|
||||
#define PROCMON_EN(x) (((x) & 0x1) << 16)
|
||||
#define PROCMON_SEL(x) (((x) & 0x3) << 24)
|
||||
#define PROCMON_NT_EN(x) (((x) & 0x1) << 28)
|
||||
|
||||
#define PROCMON_SEL_HFCLK 0
|
||||
#define PROCMON_SEL_HFXOSCIN 1
|
||||
#define PROCMON_SEL_PLLOUTDIV 2
|
||||
#define PROCMON_SEL_PROCMON 3
|
||||
|
||||
#endif // _SIFIVE_PRCI_H
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef _SIFIVE_PWM_H
|
||||
#define _SIFIVE_PWM_H
|
||||
|
||||
/* Register offsets */
|
||||
|
||||
#define PWM_CFG 0x00
|
||||
#define PWM_COUNT 0x08
|
||||
#define PWM_S 0x10
|
||||
#define PWM_CMP0 0x20
|
||||
#define PWM_CMP1 0x24
|
||||
#define PWM_CMP2 0x28
|
||||
#define PWM_CMP3 0x2C
|
||||
|
||||
/* Constants */
|
||||
|
||||
#define PWM_CFG_SCALE 0x0000000F
|
||||
#define PWM_CFG_STICKY 0x00000100
|
||||
#define PWM_CFG_ZEROCMP 0x00000200
|
||||
#define PWM_CFG_DEGLITCH 0x00000400
|
||||
#define PWM_CFG_ENALWAYS 0x00001000
|
||||
#define PWM_CFG_ONESHOT 0x00002000
|
||||
#define PWM_CFG_CMP0CENTER 0x00010000
|
||||
#define PWM_CFG_CMP1CENTER 0x00020000
|
||||
#define PWM_CFG_CMP2CENTER 0x00040000
|
||||
#define PWM_CFG_CMP3CENTER 0x00080000
|
||||
#define PWM_CFG_CMP0GANG 0x01000000
|
||||
#define PWM_CFG_CMP1GANG 0x02000000
|
||||
#define PWM_CFG_CMP2GANG 0x04000000
|
||||
#define PWM_CFG_CMP3GANG 0x08000000
|
||||
#define PWM_CFG_CMP0IP 0x10000000
|
||||
#define PWM_CFG_CMP1IP 0x20000000
|
||||
#define PWM_CFG_CMP2IP 0x40000000
|
||||
#define PWM_CFG_CMP3IP 0x80000000
|
||||
|
||||
#endif /* _SIFIVE_PWM_H */
|
||||
|
|
@ -0,0 +1,80 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef _SIFIVE_SPI_H
|
||||
#define _SIFIVE_SPI_H
|
||||
|
||||
/* Register offsets */
|
||||
|
||||
#define SPI_REG_SCKDIV 0x00
|
||||
#define SPI_REG_SCKMODE 0x04
|
||||
#define SPI_REG_CSID 0x10
|
||||
#define SPI_REG_CSDEF 0x14
|
||||
#define SPI_REG_CSMODE 0x18
|
||||
|
||||
#define SPI_REG_DCSSCK 0x28
|
||||
#define SPI_REG_DSCKCS 0x2a
|
||||
#define SPI_REG_DINTERCS 0x2c
|
||||
#define SPI_REG_DINTERXFR 0x2e
|
||||
|
||||
#define SPI_REG_FMT 0x40
|
||||
#define SPI_REG_TXFIFO 0x48
|
||||
#define SPI_REG_RXFIFO 0x4c
|
||||
#define SPI_REG_TXCTRL 0x50
|
||||
#define SPI_REG_RXCTRL 0x54
|
||||
|
||||
#define SPI_REG_FCTRL 0x60
|
||||
#define SPI_REG_FFMT 0x64
|
||||
|
||||
#define SPI_REG_IE 0x70
|
||||
#define SPI_REG_IP 0x74
|
||||
|
||||
/* Fields */
|
||||
|
||||
#define SPI_SCK_PHA 0x1
|
||||
#define SPI_SCK_POL 0x2
|
||||
|
||||
#define SPI_FMT_PROTO(x) ((x) & 0x3)
|
||||
#define SPI_FMT_ENDIAN(x) (((x) & 0x1) << 2)
|
||||
#define SPI_FMT_DIR(x) (((x) & 0x1) << 3)
|
||||
#define SPI_FMT_LEN(x) (((x) & 0xf) << 16)
|
||||
|
||||
/* TXCTRL register */
|
||||
#define SPI_TXWM(x) ((x) & 0xffff)
|
||||
/* RXCTRL register */
|
||||
#define SPI_RXWM(x) ((x) & 0xffff)
|
||||
|
||||
#define SPI_IP_TXWM 0x1
|
||||
#define SPI_IP_RXWM 0x2
|
||||
|
||||
#define SPI_FCTRL_EN 0x1
|
||||
|
||||
#define SPI_INSN_CMD_EN 0x1
|
||||
#define SPI_INSN_ADDR_LEN(x) (((x) & 0x7) << 1)
|
||||
#define SPI_INSN_PAD_CNT(x) (((x) & 0xf) << 4)
|
||||
#define SPI_INSN_CMD_PROTO(x) (((x) & 0x3) << 8)
|
||||
#define SPI_INSN_ADDR_PROTO(x) (((x) & 0x3) << 10)
|
||||
#define SPI_INSN_DATA_PROTO(x) (((x) & 0x3) << 12)
|
||||
#define SPI_INSN_CMD_CODE(x) (((x) & 0xff) << 16)
|
||||
#define SPI_INSN_PAD_CODE(x) (((x) & 0xff) << 24)
|
||||
|
||||
#define SPI_TXFIFO_FULL (1 << 31)
|
||||
#define SPI_RXFIFO_EMPTY (1 << 31)
|
||||
|
||||
/* Values */
|
||||
|
||||
#define SPI_CSMODE_AUTO 0
|
||||
#define SPI_CSMODE_HOLD 2
|
||||
#define SPI_CSMODE_OFF 3
|
||||
|
||||
#define SPI_DIR_RX 0
|
||||
#define SPI_DIR_TX 1
|
||||
|
||||
#define SPI_PROTO_S 0
|
||||
#define SPI_PROTO_D 1
|
||||
#define SPI_PROTO_Q 2
|
||||
|
||||
#define SPI_ENDIAN_MSB 0
|
||||
#define SPI_ENDIAN_LSB 1
|
||||
|
||||
|
||||
#endif /* _SIFIVE_SPI_H */
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
// See LICENSE for license details.
|
||||
|
||||
#ifndef _SIFIVE_UART_H
|
||||
#define _SIFIVE_UART_H
|
||||
|
||||
/* Register offsets */
|
||||
#define UART_REG_TXFIFO 0x00
|
||||
#define UART_REG_RXFIFO 0x04
|
||||
#define UART_REG_TXCTRL 0x08
|
||||
#define UART_REG_RXCTRL 0x0c
|
||||
#define UART_REG_IE 0x10
|
||||
#define UART_REG_IP 0x14
|
||||
#define UART_REG_DIV 0x18
|
||||
|
||||
/* TXCTRL register */
|
||||
#define UART_TXEN 0x1
|
||||
#define UART_TXWM(x) (((x) & 0xffff) << 16)
|
||||
|
||||
/* RXCTRL register */
|
||||
#define UART_RXEN 0x1
|
||||
#define UART_RXWM(x) (((x) & 0xffff) << 16)
|
||||
|
||||
/* IP register */
|
||||
#define UART_IP_TXWM 0x1
|
||||
#define UART_IP_RXWM 0x2
|
||||
|
||||
#endif /* _SIFIVE_UART_H */
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
// See LICENSE for license details.
|
||||
#ifndef _SECTIONS_H
|
||||
#define _SECTIONS_H
|
||||
|
||||
extern unsigned char _rom[];
|
||||
extern unsigned char _rom_end[];
|
||||
|
||||
extern unsigned char _ram[];
|
||||
extern unsigned char _ram_end[];
|
||||
|
||||
extern unsigned char _ftext[];
|
||||
extern unsigned char _etext[];
|
||||
extern unsigned char _fbss[];
|
||||
extern unsigned char _ebss[];
|
||||
extern unsigned char _end[];
|
||||
|
||||
#endif /* _SECTIONS_H */
|
||||
|
|
@ -0,0 +1,65 @@
|
|||
#ifndef SIFIVE_SMP
|
||||
#define SIFIVE_SMP
|
||||
|
||||
// The maximum number of HARTs this code supports
|
||||
#ifndef MAX_HARTS
|
||||
#define MAX_HARTS 32
|
||||
#endif
|
||||
#define CLINT_END_HART_IPI CLINT_CTRL_ADDR + (MAX_HARTS*4)
|
||||
|
||||
// The hart that non-SMP tests should run on
|
||||
#ifndef NONSMP_HART
|
||||
#define NONSMP_HART 0
|
||||
#endif
|
||||
|
||||
/* If your test cannot handle multiple-threads, use this:
|
||||
* smp_disable(reg1)
|
||||
*/
|
||||
#define smp_disable(reg1, reg2) \
|
||||
csrr reg1, mhartid ;\
|
||||
li reg2, NONSMP_HART ;\
|
||||
beq reg1, reg2, hart0_entry ;\
|
||||
42: ;\
|
||||
wfi ;\
|
||||
j 42b ;\
|
||||
hart0_entry:
|
||||
|
||||
/* If your test needs to temporarily block multiple-threads, do this:
|
||||
* smp_pause(reg1, reg2)
|
||||
* ... single-threaded work ...
|
||||
* smp_resume(reg1, reg2)
|
||||
* ... multi-threaded work ...
|
||||
*/
|
||||
|
||||
#define smp_pause(reg1, reg2) \
|
||||
li reg2, 0x8 ;\
|
||||
csrw mie, reg2 ;\
|
||||
csrr reg2, mhartid ;\
|
||||
bnez reg2, 42f
|
||||
|
||||
#define smp_resume(reg1, reg2) \
|
||||
li reg1, CLINT_CTRL_ADDR ;\
|
||||
41: ;\
|
||||
li reg2, 1 ;\
|
||||
sw reg2, 0(reg1) ;\
|
||||
addi reg1, reg1, 4 ;\
|
||||
li reg2, CLINT_END_HART_IPI ;\
|
||||
blt reg1, reg2, 41b ;\
|
||||
42: ;\
|
||||
wfi ;\
|
||||
csrr reg2, mip ;\
|
||||
andi reg2, reg2, 0x8 ;\
|
||||
beqz reg2, 42b ;\
|
||||
li reg1, CLINT_CTRL_ADDR ;\
|
||||
csrr reg2, mhartid ;\
|
||||
slli reg2, reg2, 2 ;\
|
||||
add reg2, reg2, reg1 ;\
|
||||
sw zero, 0(reg2) ;\
|
||||
41: ;\
|
||||
lw reg2, 0(reg1) ;\
|
||||
bnez reg2, 41b ;\
|
||||
addi reg1, reg1, 4 ;\
|
||||
li reg2, CLINT_END_HART_IPI ;\
|
||||
blt reg1, reg2, 41b
|
||||
|
||||
#endif
|
||||
|
|
@ -7,12 +7,13 @@
|
|||
|
||||
#include "platform.h"
|
||||
#include "stub.h"
|
||||
#include "weak_under_alias.h"
|
||||
|
||||
ssize_t __wrap_read(int fd, void* ptr, size_t len)
|
||||
{
|
||||
uint8_t * current = (uint8_t *)ptr;
|
||||
volatile uint32_t * uart_rx = (uint32_t *)(UART0_BASE_ADDR + UART_REG_RXFIFO);
|
||||
volatile uint8_t * uart_rx_cnt = (uint8_t *)(UART0_BASE_ADDR + UART_REG_RXCTRL + 2);
|
||||
volatile uint32_t * uart_rx = (uint32_t *)(UART0_CTRL_ADDR + UART_REG_RXFIFO);
|
||||
volatile uint8_t * uart_rx_cnt = (uint8_t *)(UART0_CTRL_ADDR + UART_REG_RXCTRL + 2);
|
||||
|
||||
ssize_t result = 0;
|
||||
|
||||
|
|
@ -28,3 +29,4 @@ ssize_t __wrap_read(int fd, void* ptr, size_t len)
|
|||
|
||||
return _stub(EBADF);
|
||||
}
|
||||
weak_under_alias(read);
|
||||
|
|
|
|||
|
|
@ -0,0 +1,7 @@
|
|||
#ifndef _BSP_LIBWRAP_WEAK_UNDER_ALIAS_H
|
||||
#define _BSP_LIBWRAP_WEAK_UNDER_ALIAS_H
|
||||
|
||||
#define weak_under_alias(name) \
|
||||
extern __typeof (__wrap_##name) __wrap__##name __attribute__ ((weak, alias ("__wrap_"#name)))
|
||||
|
||||
#endif
|
||||
|
|
@ -7,6 +7,7 @@
|
|||
|
||||
#include "platform.h"
|
||||
#include "stub.h"
|
||||
#include "weak_under_alias.h"
|
||||
|
||||
ssize_t __wrap_write(int fd, const void* ptr, size_t len)
|
||||
{
|
||||
|
|
@ -27,3 +28,4 @@ ssize_t __wrap_write(int fd, const void* ptr, size_t len)
|
|||
|
||||
return _stub(EBADF);
|
||||
}
|
||||
weak_under_alias(write);
|
||||
|
|
|
|||
Loading…
Reference in New Issue