Because *out needs to reserve a byte to hold '\0', no more characters
should be added to the buffer when *out has one byte left, and the
buffer size *out_len should not be modified. this patch prevents
the correction of *out_len when *out_len is 1.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When doing width = width - strlen(string) in prints there is no need
to consider the case that witdh may be less than 0. This is because
the code to do filling needs to be executed under the condition that
width > 0.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The information of sg/b/letbase can be obtained by the type character,
simplifying the parameter by passing the type directly.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The space flag is used to add a space before positive numbers, and
apostrophe is used to print the thousand separator. Add code to
ignore these two flags
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Adds + flags for print, prefixing positive numbers with + when this
flags is present
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Left alignment and padding '0' should not exist at the same time,
this patch skips padding.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The flags for print should be able to appear in any order. The
previous code required the order to be fixed.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
After the loop to find the hartid is launched, assigning -1 to
index will fail in the subsequent compare instruction bge. Fix
This.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
A final check of all DT nodes does not necessarily find a match, so
SBI_ENODEV needs to be returned. Optimize removal of current_driver.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
console is not a required peripheral. So it should return success when
the console does not exist.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
No need to do a fully comprehensive count, just find a supported reset
or suspend type
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We have redundant semicolon at quite a few places so let's remove it.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When tlb_fifo is full, it will wait and affect the ipi update to
other harts. This patch is optimized.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
tlb_process_count is only used when count=1, so refactor to
tlb_process_once and add the return value to be reused in
tlb_process
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
The original sbi_ipi will be processed by hart by hart, after optimization,
send ipi first and finally wait together.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Originally, the process and sync of sbi_tlb need to wait for each other.
Evasion by atomic addition and subtraction.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Because firmware is split into rw/rx segments, it cannot be recorded
by a root_fw_region. This problem is solved by adding a flag
fw_region_inited to sbi_domain.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When building with GCC-10 or older versions, it throws the following
error:
CC-DEP platform/generic/lib/utils/fdt/fdt_fixup.dep
CC platform/generic/lib/utils/fdt/fdt_fixup.o
lib/utils/fdt/fdt_fixup.c: In function 'fdt_reserved_memory_fixup':
lib/utils/fdt/fdt_fixup.c:376:2: error: label at end of compound statement
376 | next_entry:
| ^~~~~~~~~~
Remove the goto statement.
Resolves: https://github.com/riscv-software-src/opensbi/issues/288
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
When order is equal to __riscv_xlen, the shift operation will not perform
any operation, which will cause reg->base & (BIT(reg->order) - 1) to always
be 0, and the condition has not been established.
This patch fixes this bug.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Corrected the same parameter of writel_relaxed in sun20i_d1_riscv_cfg_init
to be u32 for a while and u64 for a while.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
uart->reg_offset and uart->reg_io_width are only used on uart8250 and
not required on other platforms. Remove for sifive and gaisler.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If the csr's operation comes from M mode, it should not be forwarded
to low-privilege processing, this patch fixes this problem.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add static detection to prevent the modification of struct fw_dynamic_info
from forgetting the modification of FW_DYNAMIC_INFO_xxx_OFFSET
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add static detection to prevent the modification of struct sbi_scratch
from forgetting the modification of SBI_SCRATCH_xxx_OFFSET
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add static detection to prevent the modification of struct sbi_platform
from forgetting the modification of SBI_PLATFORM_xxx_OFFSET
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
On 128-bit machines, sbi_load_xx/sbi_store_xx needs to be improved.
Through this conditional compile, the corresponding implementation
can be prompted to be added.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
lwu exists under the current rv64 and should also exist under the rv128
in the future, so I modified the conditions of conditional compilation
so that it can adapt to the future situation
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
pmp_set/pmp_get calculates the location of the CSR register separately
through conditional compilation. In the case of non-32-bit and 64-bit,
we can report an error directly through #error without putting it at
runtime
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The commit 69d7e53 disables the -m(no-)save-restore option for
clang, but clang11 supports this option. This patch uses the
output information of the compiler to check whether the compiler
supports this option.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We should clear A bits in prot variable before enabling A_NA4 or A_NAPOT.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We use BUG() macro in csr_read_num(), csr_write_num(), and
misa_string() functions for unhandled cases.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Three macros are added. One is called BUG, which is used to put in an
unreachable branch. One is called BUG_ON, which is used to check bugs
and assert conditions are opposite. One is called SBI_ASSERT, used for
assertion checking.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The original version of ctz will cause an endless loop, if the parameter
passed in is 0. This commit fixes this bug.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The previous code uses _start as the load address, this default .entry is
the first segment, using _fw_start does not need to make this assumption.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The unsigned length may be 4 bytes or 8 bytes, amoadd.w only applies
to 4 bytes hence this patch.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
csr_read_allowed/csr_read_allowed requires trap.case to detect the results,
but if no exception occurs, the value of trap.case will remain unchanged,
which makes the detection results unreliable. Add code to initialize
trap.case to 0.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There are two copies of the same abnormal exit code, this patch deletes one
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The old code may corrupt the code of the waiting hart hence this patch
keeps waiting HART within relocation code range at time of relocation.
Signed-off-by: Xiang W <wxjstz@126.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
This patch extends relocation to handle overlapping load and link
addresses.
The updated relocation will work fine in most cases except when the
relocate copy loop itself falls in overlapping load and link addresses.
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
When I tried to start opensbi with coreboot, I found that aligning to a 16-byte
boundary would make a copy error.
Corrected to align to an machine word length boundary.
Signed-off-by: Xiang Wang <wxjstz@126.com>
Multi-core communication via memory requires the addition of a barrier
instructions to ensure cache coherency.
Signed-off-by: Xiang Wang <wxjstz@126.com>
