313 Commits
v1.4 ... v1.6

Author SHA1 Message Date
Anup Patel
bd613dd921 include: Bump-up version to 1.6
Update the OpenSBI version to 1.6 as part of release preparation.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
2024-12-24 15:28:18 +05:30
Anup Patel
7150db29d7 lib: utils: Fix irqchip registration for PLIC and APLIC
Currently, the same irqchip instance is registered for multiple PLIC
and APLIC instances which causes the sbi_list_for_each_entry() loop
in the sbi_irqchip_init() to hang at boot-time.

To address the above issue, register a separate irqchip instance for
each PLIC and APLIC instance.

Fixes: 2dd6eaf680 ("lib: sbi_irqchip: Call driver warm_init from SBI core")
Reported-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-12-24 14:06:09 +05:30
Anup Patel
551ac0f2d4 lib: sbi: Improve the alignment of boot-time prints
Addition of "Experimental SBI Extensions" to the boot-time prints
disturbs the alignment of other prints so adjust all boot-time
prints accordingly.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-24 12:00:47 +05:30
Anup Patel
06754612f3 lib: sbi: Print list of available SBI extensions at boot-time
Add boot-time prints for list of available standard and experimental
SBI extensions.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-22 11:16:13 +05:30
Michael Neuling
d539d64a23 include: sbi: Fix compiling with C23 enabled compilers
C23 pre-defines bool so we need to gate our defines.

Signed-off-by: Michael Neuling <michaelneuling@tenstorrent.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-21 21:38:50 +05:30
Michael Neuling
91196d76b7 inclue: sbi_utils: Cleanup int vs bool in semihosting_init() definitions
This is needed for a future patches to enable the new C23 language dialect.

Signed-off-by: Michael Neuling <michaelneuling@tenstorrent.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-21 21:21:59 +05:30
Samuel Holland
8d8cc9507b lib: utils: Mark RPMI drivers as experimental
These drivers were merged on an experimental basis without the RPMI
specification being frozen. As a result, they may not be compatible with
the frozen version of the RPMI protocol. Additionally, their devicetree
bindings have not been reviewed and are subject to change. Warn the user
that these drivers make no compatibility guarantees, and that their
behavior and devicetree bindings may change incompatibly in future
versions of OpenSBI.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-21 18:22:47 +05:30
Samuel Holland
0c5dc12d73 platform: generic: Initialize console before other drivers
Initialize serial drivers first, so messages printed by other drivers do
not need to use the early console buffer.

Suggested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-21 18:21:50 +05:30
Xiang W
f069301654 lib: utils: Improve rpmi_cppc_fc_db_trigger() for RV32
Improve 64-bit operation under rv32 and remove db_val_u32_hi
in rpmi_cppc_fc_db_trigger().

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-19 11:02:30 +05:30
Atish Patra
51dbc57fc7 lib: sbi_pmu: Verify the raw events first during event info
The raw events have same event_idx. Thus, the event info sanity check
only relies on the select mask. The raw event check should be done first
so that regular hardware events can be verified using event idx range
check.

Fixes: e434584216 ("lib: sbi_pmu: Implement SBI PMU event info function")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-15 14:13:12 +05:30
Atish Patra
0928ca21bc lib: sbi_pmu: Fix the sanity check condition for hw event map
The hardware event map function invoked from platform code should
exclude any raw events as there is a separate function for the raw
events.

Fixes: d8a483fc7f ("lib: sbi_pmu: PMU raw event v2 support")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-15 14:06:52 +05:30
Ben Dooks
39532d11e9 scripts/carray: change to using single awk invocation to generate .c
The shell script makes multiple call-outs to awk to get information
from the configuration file. It would be easier to just write the
whole thing in one .awk script and have the makefile altered to call
that instead.

There should be no functional difference other than the script type
and has been tested with PLATFORM=generic build. This should be both
quicker and easier to understand.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-15 12:39:59 +05:30
Ben Dooks
2c76548cba script/carry.sh: send error to stderr
Send the errors to stderr, otherwise they end up being
written to the file the script was redirecting to in the
Makefile

Also, use EOF block to make it easier to redirect

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-15 12:30:50 +05:30
Ben Dooks
a36cd1b043 Makefile: remove carry output if scripts/carray.sh fails
If the script fails, we end up trying to build either
an empty or damaged .c file. Just remove it and let
gcc fail on non-existent file.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-15 12:30:47 +05:30
Ben Dooks
c7866d99fe top: add ~ files to .gitignore
Ignore temporary files, and avoid accidentally adding
them to a commit.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-15 12:30:45 +05:30
Clément Léger
b47fcd01b3 lib: sbi: sse: Fix a6 and a7 register content upon injection
The specification states that a6 contains the current hart id and
a7 contains the entry argument. This was inverted in the current
implementation.

Reported-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-15 11:53:53 +05:30
Clément Léger
851e301098 lib: sbi: fix GLOBAL_PLAT_DEFINE
Fix GLOBAL_PLAT_0_START/END definitions. The specification states that
the beginning of the range is 0xc000 and the end is 0xffff.

Reported-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-15 11:52:57 +05:30
Anup Patel
5545602f77 Makefile: Don't enable V-extension using -march option
Enabling V-extension using -march option causes OpenSBI boot-time
hang with LLVM compiler.

As a work-around, don't enable V-extension using -march option and
instead use a custom OpenSBI specific define inform availability of
V-extension to lib/sbi/sbi_trap_v_ldst.c.

Fixes: c2acc5e5b0 ("lib: sbi_misaligned_ldst: Add handling of vector load/store")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-12-15 11:30:48 +05:30
Anup Patel
74c6ea014d lib: utils/fdt_cppc_rpmi: Fix compile error with LLVM
The following error is observed when compiling fdt_cppc_rpmi
driver using LLVM:

lib/utils/cppc/fdt_cppc_rpmi.c:87:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
   87 |                 u64 db_val_u64 = 0;

To fix the above issue, move the variable declaration at the
start of function.

Fixes: 591a98bdd5 ("lib: utils/cppc: Add RPMI CPPC driver")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-12-15 11:28:13 +05:30
Nylon Chen
c2acc5e5b0 lib: sbi_misaligned_ldst: Add handling of vector load/store
Add misaligned load/store handling for the vector extension
to the sbi_misaligned_ldst library.

This implementation is inspired from the misaligned_vec_ldst
implementation in the riscv-pk project.

Co-developed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-06 17:43:06 +05:30
Rahul Pathak
c5a8b15e39 lib: utils/mpxy: Add RPMI client driver for MPXY
Add a generic RPMI mailbox client driver which provides a MPXY channel.
Initially, this driver only supports RPMI clock service group but can
be extended to support multiple RPMI service groups.

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:57 +05:30
Anup Patel
32577ec3a1 lib: utils: Add simple FDT based MPXY driver framework
The generic platform can have multiple MPXY drivers so add a simple
FDT based MPXY driver framework.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:54 +05:30
Anup Patel
e67d91cdcc lib: sbi: Implement SBI MPXY extension
Implement the SBI MPXY extension which provides an SBI interface to
the supervisor software for send messages via MPXY framework.

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:52 +05:30
Rahul Pathak
7939bf1329 lib: sbi: Add SBI Message Proxy (MPXY) framework
Introduce SBI Message Proxy (MPXY) framework which allows platform specific
code or drivers to register message protocol specific channels.

This framework enables the supervisor software to send messages belonging
to different message protocols via OpenSBI firmware.

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:50 +05:30
Subrahmanya Lingappa
591a98bdd5 lib: utils/cppc: Add RPMI CPPC driver
Add RPMI based driver for CPPC register read, write and probe.

Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Co-developed-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:47 +05:30
Anup Patel
54e632b72e lib: utils: Add simple FDT based CPPC driver framework
The generic platform can have multiple CPPC drivers so add a simple
FDT based CPPC driver framework.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:45 +05:30
Subrahmanya Lingappa
33ee9b8240 lib: utils/hsm: Add RPMI HSM driver
The RPMI HSM service group provides set of routine to query and control
power states of a Hart. Add RPMI based Hart State Management (HSM) driver.

Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:43 +05:30
Anup Patel
ff4769bf08 lib: utils: Add simple FDT based HSM driver framework
The generic platform can have multiple HSM drivers so add a simple
FDT based HSM driver framework.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:40 +05:30
Anup Patel
9d760b810e lib: utils/fdt: Allow dynamic registration of FDT fixup callbacks
It should possible to fixup FDT from any part of OpenSBI so add
fdt_register_general_fixup() which allows dynamic registration of
FDT fixup callbacks.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:38 +05:30
Subrahmanya Lingappa
fdd7263536 lib: sbi: Add optional resume address to hart suspend
Add an optional resume address to the platform specific hart suspend call.

Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:35 +05:30
Subrahmanya Lingappa
13f55f33a1 lib: utils/suspend: Add RPMI system suspend driver
Add RPMI based system suspend driver.

To test this, execute the follwoing in Linux:
 $ echo mem > /sys/power/state

To wake up, execute the following command on qemu monitor terminal:
 (qemu) system_wakeup

Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:32 +05:30
Anup Patel
3676324b0e lib: utils: Add simple FDT based system suspend driver framework
The generic platform can have multiple system suspend drivers so add a
simple FDT based system suspend driver framework.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:29 +05:30
Rahul Pathak
6a26726e08 lib/utils: reset: Add RPMI System Reset driver
Add RPMI based driver for system reset and enable it in the generic
platform defconfig

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:27 +05:30
Rahul Pathak
91f46fb47e lib/utils: Add RPMI messaging protocol and shared memory transport support
The RISC-V Platform Management Interface (RPMI) defines a messaging protocol
and shared memory based transport for bi-directional communication with an
on-chip or external microcontroller.

To support RPMI in OpenSBI, add:
1) The RPMI messaging protocol defines and helper macros
2) A FDT mailbox driver for the RPMI shared memory transport

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:21 +05:30
Anup Patel
2244a34f0d lib: utils/mailbox: Add simple FDT based mailbox framework
Add a simple FDT based mailbox framework which is built on top of the generic
mailbox library. The phandle of FDT mailbox DT node is treated as the unique
mailbox controller ID which is required by the generic mailbox library. The
FDT based mailbox drivers will be probed on-demand from fdt_mailbox_request_chan()
called by the mailbox client drivers.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:19 +05:30
Anup Patel
ad846a7cb8 lib: utils/mailbox: Add generic mailbox library
Add generic mailbox library which is independent of hardware description
format. The OpenSBI platform support or mailbox drivers can register
mailbox controller instances which can be discovered and used by different
mailbox client drivers. Each mailbox controller instance has a unique ID
which can be used by mailbox client drivers for find the mailbox controller
instance. The mailbox client drivers will typically request a mailbox channel
from the mailbox controller and use it to do data transfer with the remote
end of mailbox channel.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:13 +05:30
Rahul Pathak
b49d67b70f lib: Increase ROOT_REGION_MAX to accomodate more memregions
As more drivers adding memregions into root domain, the current static limit
of ROOT_REGION_MAX is not sufficient. Increase the limit to accomodate more
memregions.

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-12-06 09:26:11 +05:30
Atish Patra
e434584216 lib: sbi_pmu: Implement SBI PMU event info function
Allow the supervisor software to query about the event using the
new function. This supports both firmware and hardware events.
The hardware event presence is verified hw_event_map which is populated
via PMU device tree node. The firmware event presence is checked through
event validation function which should take care of both standard and
platform firmware events.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-02 09:52:55 +05:30
Atish Patra
05970d273c lib: sbi_pmu: Add SBI PMU event info function details.
The SBI v3.0 introduced a new function to query about the events
without invoking CFG_MATCH. This allows supervisor software to
identify which events are supported on the platform with single
SBI call instead of a CFG_MATCH for each event.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-02 09:52:52 +05:30
Atish Patra
cf196d80aa lib: sbi_pmu: Remove redundant check for fw events
The pmu_validate_event already has the same check for fw events.
The validate function is called prior to the current function
to find a counter for firmware. That's why, the redudant
check can be removed from the find counter function.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-02 09:52:50 +05:30
Atish Patra
d8a483fc7f lib: sbi_pmu: PMU raw event v2 support
As per the updated ISA specification and SBI PMU v3.0, lower 56
bits are available for the platform to implement mhpmeventX
encoding. Implement the PMU raw event V2 support defined in SBI
v3.0 which allows more bits for platforms to encode the raw events.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-02 09:52:04 +05:30
Igor Melnikov
40e725da03 Makefile: Fix POSIX grep for multiple patterns
grep -e "-mstrict-align\|-mno-unaligned-access" makes use of GNU grep's
backslash-escaped alternation operator \| which is available in basic
regular expression syntax (BRE) mode.

However, in POSIX grep's BRE mode | is an ordinary character which, when
backslash-escaped, matches itself. Therefore, the search pattern becomes
a plain string '-mstrict-align|-mno-unaligned-access' which obviously
never matches the expected error and CC_SUPPORT_STRICT_ALIGN is always set
to y.

When cross-compiling with LLVM on amd64-unknown-openbsd7.6 host for
riscv64-unknown-elf target this results in a compilation error:

clang: error: unsupported option '-mno-unaligned-access' for target
'riscv64-unknown-elf'

Using multiple -e options for this case maintains consistent behaviour
across different grep implementations and fixes the issue.

Signed-off-by: Igor Melnikov <imel@purelymail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-01 12:32:18 +05:30
Samuel Holland
a387a8dff0 lib: utils/timer: Use fdt_driver for initialization
The timer driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_timer_init() performs a
best-effort initialization of all matching DT nodes.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:57:20 +05:30
Samuel Holland
a524f0a507 lib: utils/serial: Use fdt_driver for initialization
The serial driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_serial_init() first
attempts to match the chosen stdout device, and upon failure matches the
first available serial device in the DT. It is a fatal error if no such
device is found. This matches the behavior of fdt_driver_init_one().

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:52:58 +05:30
Samuel Holland
6d9ad492db lib: utils/reset: Use fdt_driver for initialization
The reset driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_reset_init() performs a
best-effort initialization of all matching DT nodes. Platform-specific
logic expects exactly one DT node to match a single driver. This is
accomplished by using fdt_driver_init_one() with a local list containing
that one driver.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:48:17 +05:30
Samuel Holland
1f8db2f18f lib: utils/regmap: Use fdt_driver for initialization
The regmap driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. It always initializes the driver for a
specific DT node.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:45:29 +05:30
Samuel Holland
5fa510c5f6 lib: utils/ipi: Use fdt_driver for initialization
The ipi driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_ipi_init() performs a
best-effort initialization of all matching DT nodes.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:42:05 +05:30
Samuel Holland
333133edaa lib: utils/i2c: Use fdt_driver for initialization
The i2c driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. It always initializes the driver for a
specific DT node.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:38:05 +05:30
Samuel Holland
bef8f9b806 lib: utils/gpio: Use fdt_driver for initialization
FDT gpio drivers have an extra .xlate operation, so they need to embed
the `struct fdt_driver` inside the subsystem-specific type. The gpio
subsystem always initializes the driver for a specific DT node.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:29:12 +05:30
Samuel Holland
10df2d6fb5 scripts/carray.sh: Allow referencing a struct member
It can be useful to embed the objects referenced by a carray inside
another struct. To avoid type punning, the generated carray code must
use the correct type for the enclosing struct and member access to
compute the desired object address.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:23:36 +05:30
Samuel Holland
bb008e5d27 scripts/carray.sh: Avoid useless use of cat
awk(1) takes input files as positional arguments, so there is no need
to read the file with cat(1).

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:17:54 +05:30
Samuel Holland
1ccc52c427 lib: utils/fdt: Add helpers for generic driver initialization
Currently, each driver subsystem contains its own code for matching
drivers against the platform's devicetree blob. This bloats firmware
size because the several FDT scanning loops are almost exact copies of
each other, and is confusing because the loops do have some subtle
differences. Furthermore, the existing match algorithm is inefficient:
it scans the FDT structure separately for each driver in the list. A
faster algorithm scans the FDT blob only once, matching all drivers in
the list for each `compatible` property seen.

Add new helpers implementing this faster algorithm. Since they must
iterate through the list of drivers, the driver structure cannot be
opaque. However, since the driver list is an array of pointers, the
`struct fdt_driver` can be embedded in a subsystem-specific driver
structure if needed. These three helpers cover all existing use cases
for driver initialization within OpenSBI.

An additional benefit of centralized driver initialization is the
consistent use of fdt_node_is_enabled().

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:13:05 +05:30
Samuel Holland
df1c100001 treewide: Make carray arrays const and NULL-terminated
This allows the compiler to generate significantly better code, because
it does not have to maintain either the loop counter or loop limit. Plus
there are half as many symbols to relocate. This also simplifies passing
carray arrays to helper functions.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 17:09:17 +05:30
Nick Hu
23ef9c5f00 sbi: fwft: clear the config lock when warm boot
The hotplug cpu should clear the fwft config's SBI_FWFT_SET_FLAG_LOCK
in the warm boot flow otherwise the cpu can't set the menvcfg.sse by
SBI_EXT_FWFT_SET sbi call and cause the illegal instruction when
accessing the CSR_SSP in kernel.

Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 12:13:38 +05:30
Samuel Holland
111772353f lib: sbi_irqchip: Set the IRQ handler when registering a chip
In addition to saving some code size, this moves the decision about
setting the top-level external interrupt handler to the irqchip core,
not the specific driver, which would be needed to support chained
interrupt handlers.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 11:51:56 +05:30
Samuel Holland
678f5909a3 platform: Drop irqchip warm init and exit hooks
Now that driver lifecycle is managed from within the SBI irqchip core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 11:46:36 +05:30
Samuel Holland
2dd6eaf680 lib: sbi_irqchip: Call driver warm_init from SBI core
Currently, each platform keeps track of which irqchip driver is in use
and calls its warm init function. Since the generic platform may use
multiple irqchip drivers, it has logic to track an array of drivers.

The code is simplified and made common across platforms by treating warm
init and exit as properties of the driver, not the platform. Then the
platform's only role is to select and prepare a driver during cold boot.

For now, only add a .warm_init hook, since none of the existing drivers
need an .exit hook. It could be added in the future if needed.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 11:40:17 +05:30
Samuel Holland
e3e5686ef9 lib: sbi_irqchip: Register devices during cold init
Have the SBI irqchip core keep track of registered irqchip devices. This
is useful for any callbacks the irqchip driver may have, such as for
warm initialization, the external interrupt handler function, and any
future support for handling external interrupts (beyond IPIs) in M-mode.

This improves on the tracking done in fdt_irqchip.c, as it tracks device
instances, not just drivers, so callbacks can target a specific device.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 11:37:25 +05:30
Samuel Holland
56fddce83f lib: utils/irqchip: Move per-hart data from fdt_plic to plic
The per-hart PLIC pointer is not really specific to FDT platforms. Move
it into the main driver and drop the extra wrapper functions.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 11:35:01 +05:30
Samuel Holland
c6c22f00f4 lib: utils/irqchip: plic: Common PM save/restore
Move the PLIC save/restore functions inside the driver, so they can be
reused on any platform that needs them. The memory needed to store the
PLIC context is also allocated by the driver. The PM data cannot be
completely encapsulated, as some platforms (including Allwinner D1) need
to program the IRQ enable status to a sideband interrupt controller for
wakeup capability.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 11:28:38 +05:30
Samuel Holland
69448a0790 lib: utils/irqchip: plic: Provide a hartindex to context map
This removes platform-specific arguments to plic_warm_irqchip_init(),
which makes the driver independent from the platform after cold init,
and allows for further refactoring.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 09:36:46 +05:30
Samuel Holland
c26e3fd2ed lib: utils/irqchip: plic: Move delegation to base PLIC driver
This needs to be in the base PLIC driver as part of the power management
save/restore flow.

This is also in preparation for moving the PLIC information in the
scratch area to the base PLIC driver. After that change, the FDT PLIC
layer will be unable to look up the `struct plic_data` after cold boot.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 09:35:11 +05:30
Samuel Holland
a786aed08d lib: utils/irqchip: plic: Allow enabling IRQs by default
Unlike other platforms, Ariane and OpenPiton enable all IRQs by default.
This was described in commit b44e844880 ("Add support for Ariane FPGA
SoC") as "due to some issue of the design." Add this workaround behind a
flag in plic_warm_irqchip_init(), so every platform can use the same
warm init function.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-28 09:35:10 +05:30
Samuel Holland
86d2c1797a platform: Drop IPI warm init and exit hooks
Now that the SBI IPI core clears IPIs at warm boot in a generic way,
none of the drivers or platforms use these hooks, and we can remove
them. Platforms need only to initialize the driver once during cold
init. If other hooks are needed in the future, they can be added to
struct sbi_ipi_device.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-11 18:21:04 +05:30
Samuel Holland
693afc818f lib: sbi_ipi: Move initial IPI clear to sbi_ipi_init()
sbi_ipi_init() expects the platform warm init function to clear IPIs
on the local hart, but there is already a generic function to do this.
After this change, none of the existing drivers need a warm init
callback.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-11 18:18:35 +05:30
Samuel Holland
be9752a071 lib: sbi_ipi: Make .ipi_clear always target the current hart
All existing users of this operation target the current hart, and it
seems unlikely that a future user will need to clear the pending IPI
status of a remote hart. Simplify the logic by changing .ipi_clear (and
its wrapper sbi_ipi_raw_clear()) to always operate on the current hart.

This incidentally fixes a bug introduced in commit 78c667b6fc ("lib:
sbi: Prefer hartindex over hartid in IPI framework"), which changed the
.ipi_clear parameter from a hartid to a hart index, but failed to update
the warm_init functions to match.

Fixes: 78c667b6fc ("lib: sbi: Prefer hartindex over hartid in IPI framework")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-11 18:17:15 +05:30
Zhang RunMin
db8f03e512 include: sbi: Fix typo error
Fix typo in comments describing SBI_SCRATCH_FW_HEAP_SIZE_OFFSET.

Signed-off-by: Zhang RunMin <runmin.zhang@ingenic.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-11 17:53:32 +05:30
Inochi Amaoto
5d4e3fb2ee platform: introduce DT-based configurable heap size
The default heap size will work for most platforms, but for some
special platforms, the heap is too small to hold all the information
or is too big so that it take too much ram. Introduce configurable
heap should solve this problem and make all generic platforms happy.

Add DT-based heap-size for the generic platform.

Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-11 17:48:45 +05:30
Inochi Amaoto
dcb68dd17d platform: ensure enough heap size with debug triggers extension
DBTR introduce a big heap allocation to store hart state, this is
allocated percpu and needs big space when CPU number is high.

Increase the percpu part to fix this problem, and decrease the
fixed part to avoid too big heap size.

Fixes: 97f234f (lib: sbi: Introduce the SBI debug triggers extension support)
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-11 17:40:22 +05:30
Tim Hutt
701948bdec docs: add example of building the Linux kernel
Slightly expand the QEMU docs to explain how to build the flat Linux kernel image.

Signed-off-by: Tim Hutt <tdhutt@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-09 14:30:41 +05:30
Kele Zhang
0171cfcc70 Makefile: enable --gc-sections
The --gc-sections option enables the linker to perform garbage
collection of unreferenced code and data, thereby reducing the binary
size.

The -ffunction-sections option will place each function into a separate
section, so it is necessary to add .text.* to the linker script.

Signed-off-by: Kele Zhang <zhangcola2003@gmail.com>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-06 16:29:39 +05:30
Hui Min Mina Chou
369c64517e top: Add .editorconfig to set basic coding styles
EditorConfig [1] ensures consistent coding styles for developers
collaborating on the same project across various editors and IDEs. By
adopting the Linux project's .editorconfig settings [2] and applying
them to OpenSBI, it helps users maintain uniform indentation across
different IDEs and version control systems, improving development
efficiency.

The main difference from Linux project is the addition of
'trim_trailing_whitespace = true', which removes trailing whitespace
before newlines. This change affects only three files in OpenSBI, but
it improves overall code consistency.

 $ grep -nr "\s$" --include={*.{c,dts,h,lds,ldS,mk,s,S.py},Kconfig,Makefile,Makefile.*} .
 ./include/sbi_utils/fdt/fdt_fixup.h:4: * Implement platform specific DT fixups on top of libfdt.
 ./platform/generic/platform.c:79: * The fw_platform_coldboot_harts_init() function is called by fw_platform_init()
 ./platform/generic/platform.c:81: * according to the DT property "cold-boot-harts" in "/chosen/opensbi-config"

Link: https://editorconfig.org/ [1]
Link: https://lore.kernel.org/lkml/ZbAbmchIO8Cd5hNd@surfacebook.localdomain/T/ [2]
Signed-off-by: Hui Min Mina Chou <minachou@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-06 16:25:37 +05:30
Samuel Holland
9782b8847d lib: utils/regmap: Use FDT node offset as regmap ID
Since the FDT is not modified during driver initialization, node offsets
are just as suitable as phandles for use as identifiers: they are stable
and unique. With this change, it is no longer necessary to pass the
phandle to the driver init functions, so these init functions now use
the same prototype as other kinds of drivers.

This matches what is already done for I2C adapters.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-05 17:54:41 +05:30
Samuel Holland
d71150ee70 lib: utils/gpio: Use FDT node offset as GPIO chip ID
Since the FDT is not modified during driver initialization, node offsets
are just as suitable as phandles for use as identifiers: they are stable
and unique. With this change, it is no longer necessary to pass the
phandle to the driver init functions, so these init functions now use
the same prototype as other kinds of drivers.

This matches what is already done for I2C adapters.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-05 17:54:39 +05:30
Samuel Holland
598cf961d8 lib: utils/gpio: Remove fdt_gpio_driver() function
This function looks up a chip's driver by matching known drivers against
chip->driver, but that is equivalent to using chip->driver directly.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-05 17:54:37 +05:30
Samuel Holland
99b01ab610 platform: Drop timer warm init and exit hooks
Now that driver lifecycle is managed from within the SBI timer core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-05 17:39:31 +05:30
Samuel Holland
4500828743 lib: sbi_timer: Call driver warm_init from SBI core
Currently, the platform's timer device is tracked in two places: the
core SBI implementation has `timer_dev`, and the FDT timer layer has
`current_driver`. The latter is used for warm initialization of the
timer device. However, this warm init is not specific to FDT-based
platforms; other platforms call exactly the same functions from the
same point in the boot sequence.

The code is simplified and made common across platforms by treating warm
init and exit as properties of the driver, not the platform. Then the
platform's only role is to select and prepare a driver during cold boot.

For now, only add a .warm_init hook, since none of the existing drivers
need an .exit hook. It could be added in the future if needed.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-11-05 17:29:13 +05:30
Vladimir Kondratiev
1a2e507d23 lib: sbi: fix number of PMP entries detection
CSR_PMPADDRn lower bits may read all-0 or all-1, depending on
the configuration. For TOR it is all-0, for NAPOT - all-1.

Thus if PMP entry was pre-configured as NAPOT, original code would
stop scanning because value read back not equal to the written one.

Mask lower bits before comparison to fix this

Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-10-28 11:05:14 +05:30
Samuel Holland
62447cd7aa include: sbi: Optimize reads of mhartid and mscratch
csr_read() is marked as volatile and clobbering memory, which is
generally the safe thing to do. However, these two CSRs do not have any
side effects, and the values returned do not change between calls. The
compiler can generate better code if we allow it to reorder calls to
these functions and cache the return value. Introduce csr_read_relaxed()
for this use case.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-10-28 10:51:37 +05:30
Samuel Holland
3e0c170397 lib: utils/gpio: designware: Allocate chips on the heap
This reduces firmware size for SoCs which do not use this driver.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-10-28 10:40:25 +05:30
Clément Léger
c46a937fd9 lib: sbi: add Smdbltrp ISA extension support
Add support for the Smdbltrp[1] ISA extension. First thing to do is
clearing MDT on entry after setting the first MTVEC (since MDT is
reset to 1). Additionally, during trap handling, clear MDT once all
critical CSRs have been saved and in return path, restore MSTATUS/H
before restoring MEPC to avoid taking another trap which would clobber
it.

Link: https://github.com/riscv/riscv-double-trap/releases/download/v0.56/riscv-double-trap.pdf [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-26 00:00:12 +05:30
Clément Léger
3bc86854ab lib: sbi: implement firmware feature SBI_FWFT_DOUBLE_TRAP
Add support for double trap firmware feature.

Link: https://lists.riscv.org/g/tech-prs/message/985 [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 23:59:27 +05:30
Clément Léger
b2f77f5fa8 lib: sbi: fwft: factorize menvcfg read/write
MENVCFG access will be used as well for double trap, landing pad and
shadow stack fwft support. Factorize that in a common function.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 23:58:58 +05:30
Clément Léger
b0a7e4b853 lib: sbi: send a double trap SSE event to supervisor
In case the double trap handler is called and the double trap happened
in supervisor mode, send a double trap SSE event.

NOTE: this commit depends on the ratification of the new SSE event
id for double trap [1].

Link: https://lists.riscv.org/g/tech-prs/message/985 [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 23:58:39 +05:30
Clément Léger
9c78593269 lib: sbi: add Ssdbltrp ISA extension support
Add Ssdbltrp trap handler support for S-mode double trap handling. If
the trap is received while in VS-mode, then the trap is redirected to
S-mode. If caught while in HS-mode, then an error is returned to the top
trap handler which will panic.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 23:58:00 +05:30
Clément Léger
80656bdb1d lib: sbi: factorize previous mode computation
Previous privilege mode retrieval from mstatus is done at different
places, factorize it rather than copy/pasting it again.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 23:53:18 +05:30
Clément Léger
daa282573f lib: sbi: factorize previous virtualization mode read from regs
The same pattern is used at multiple places to verify in which mode
the exception was actually taken. Factorize it.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 23:52:51 +05:30
Himanshu Chauhan
b919daf495 lib: sbi: Add support to mask/unmask SSE events
Add functions to globally mask/unmask supervisor software events
on the calling hart.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-10-25 23:04:43 +05:30
Anup Patel
ebbd276146 docs: Remove hartindex_to_context_table from domain_support.md
The hartindex_to_context_table field is no longer part of sbi_domain
so remove related documentation from domain_support.md.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-10-25 23:00:15 +05:30
Anup Patel
f609fd8584 lib: sbi_domain: Use domain data support for per-domain hart context
The per-domain hartindex_to_context_table[] is yet another per-domain
data required for implementing hart entry into (or exit from) domain.

Use the recently added domain data support for per-domain hart context
so that a dedicated hartindex_to_context_table[] in struct sbi_domain
is not needed.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
2024-10-25 23:00:10 +05:30
Anup Patel
81d79913a0 lib: sbi: Introduce domain data
Different parts of OpenSBI require their own per-domain data so
introduce domain data (or sbi_domain_data) which can be registered
by any part of OpenSBI. Using the domain data, the domain framework
will create a data pointer for every domain which can be used to
maintain some per-domain state.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
2024-10-25 23:00:07 +05:30
Anup Patel
65d4e9be95 include: sbi: Remove cyclic include in sbi_domain_context.h
The sbi_domain_context.h includes sbi_domain.h and the sbi_domain.h
also includes sbi_domain_context.h. Remove this cyclic include in
sbi_domain_context.h.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 23:00:04 +05:30
Anup Patel
2d517fce9b lib: utils/fdt: Use sbi_domain_memregion_init() when parsing domains
Use sbi_domain_memregion_init() at the time of parsing domains from
FDT so that sbi_domain_memregion_init() is always used for setting
up all memregions.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 23:00:02 +05:30
Anup Patel
36c1e4064f lib: sbi_domain: Make sbi_domain_root_add_memregion() as local function
The sbi_domain_root_add_memregion() is only used within sbi_domain
implementation so rename and make it a local function.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 23:00:00 +05:30
Anup Patel
dc5d747af8 lib: utils/irqchip: Use sbi_domain_root_add_memrange() for APLIC
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update APLIC driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 22:59:58 +05:30
Anup Patel
abc68e881d lib: utils/irqchip: Use sbi_domain_root_add_memrange() for IMSIC
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update IMSIC driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 22:59:56 +05:30
Anup Patel
8576ca4234 lib: utils/ipi: Use sbi_domain_root_add_memrange() for ACLINT mswi
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update ACLINT mswi driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-10-25 22:59:54 +05:30
Xiang W
2ffa0a153d lib: sbi: fix missing high 32bits when sbi_cppc_write on rv32
sbi_cppc_write was writing to the a1 register only, which under rv32
would cause the high 32 bits to always be 0. This patch fixes that.

Closes: https://github.com/riscv-software-src/opensbi/issues/334

Signed-off-by: Xiang W <wxjstz@126.com>
Reported-by: Wesley Norris <repnop@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-27 13:09:51 +05:30
dong.yang
3e141a6950 firmware: fw_base.S: fix multi-core boot bug.
In a multi-core startup scenario, if both _try_lottery and
_wait_for_boot_hart use the data in the _boot_status address, when
a CPU enters OpenSBI later than boot hart set the _boot_status to
BOOT_STATUS_BOOT_HART_DONE, the CPU will modify _boot_status to 1
by amoswap.w and will never be awakened in _wait_for_boot_hart.
So let _try_lottery and _boot_status use data from two addresses.

Fixes: 8151105af5 ("firmware: fw_base.S: Remove _relocate_lottery")
Signed-off-by: dong.yang <dong.yang@sophgo.com>
Reviewed-by: Xing Xiaoguang <xiaoguang.xing@sophgo.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-27 11:05:37 +05:30
Elyes Haouas
7b3de48cd5 include: sbi: Don't unconditionally define '__always_inline'
Update __always_inline macro define to fix opensbi upstream
build for coreboot.
Refer, https://qa.coreboot.org/job/coreboot-gerrit/257449/testReport/junit/(root)/clang/EMULATION_QEMU_RISCV_RV64_/

Closes: https://github.com/riscv-software-src/opensbi/issues/366
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-09-27 10:52:32 +05:30
Samuel Holland
bfa9f9aee7 Makefile: Make .carray.c files depend on carray.sh
Force carray C source files to be regenerated when the script changes,
since their contents depend on the script's output.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-27 10:47:51 +05:30
Samuel Holland
cae230c935 lib: utils/ipi: Fix hartid wrongly used as hart index
Since commit 78c667b6fc ("lib: sbi: Prefer hartindex over hartid in
IPI framework"), The .ipi_clear callback functions take a hart index,
not a hartid. However, these warm_init functions were never updated.

Fixes: 78c667b6fc ("lib: sbi: Prefer hartindex over hartid in IPI framework")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-27 10:42:24 +05:30
Samuel Holland
9155024972 lib: sbi: Remove unused hartid parameters
None of these functions use their hartid parameter.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-26 16:29:29 +05:30
Samuel Holland
3962be84d4 lib: sbi: Update sbi_{entry,init}_count() to take a hart index
All callers already have the hartindex available, so this removes a
hartid to hartindex conversion.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-26 16:29:27 +05:30
Samuel Holland
9f86524b58 lib: sbi: Update sbi_domain_is_assigned_hart() to take a hart index
This removes redundant hartid to hartindex conversions from four call
sites and provides a net reduction in code size.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-26 16:29:25 +05:30
Samuel Holland
fe153c5516 lib: sbi: Use sbi_hartmask in sbi_hsm_hart_interruptible_mask()
This removes several hartid/hartindex conversions, as well as two loops
through the mask for broadcast IPIs.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-26 16:28:18 +05:30
Samuel Holland
ebe0f31446 lib: sbi: Update __sbi_hsm_hart_get_state() to take a hart index
This removes some hartindex conversions in sbi_system_suspend(), but is
mostly intended to support refactoring sbi_hsm_hart_interruptible_mask()
to work exclusively with struct sbi_hartmask.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-26 11:30:04 +05:30
Samuel Holland
97b8038916 lib: sbi: Simplify halt broadcast logic
Use the IPI .update callback to exclude the local hart. This allows
reusing the normal logic for broadcasting an IPI to all active harts.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-26 11:16:53 +05:30
Samuel Holland
633e7cbd50 lib: sbi_ecall_legacy: Use SBI v0.2 encoding for "all harts"
This simplifies the logic so that sbi_hsm_hart_interruptible_mask() is
only called from one place (sbi_ipi_send_many()). A minor functional
change is that the legacy functions can now affect more than XLEN harts
when targeting all harts.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-26 10:44:34 +05:30
Samuel Holland
7f5fa9f9a4 lib: utils/irqchip: Look up IMSIC data by hart index
This avoids needing to map a hartid to a hart index.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-25 18:06:59 +05:30
Samuel Holland
d73a4c741c lib: sbi_sse: Cache the event's target hart index
This avoids needing to map the target hartid to a hart index when
enabling or disabling an event, and provides a net code size reduction.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-25 18:04:25 +05:30
Samuel Holland
15c4e285db lib: sbi: Use current_hartindex() where possible
This avoids calls to the expensive sbi_hartid_to_hartindex() function
and also makes the firmware smaller.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-25 12:03:30 +05:30
Samuel Holland
9d7a983060 include: sbi: Store the hart index in struct sbi_scratch
This is a more efficient way to get the index of the current hart than
calling a function to loop through the hartindex -> hartid lookup table.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-25 12:00:47 +05:30
Samuel Holland
4ac1818197 lib: sbi_init: Remove obsolete hartid check
This check has been obsolete since commit c51f02cf14 ("include:
sbi_platform: Introduce HART index to HART id table"). It originally
filtered out harts that were disabled in the FDT, but those harts are
omitted from the hart_index2id table, so they will hang in fw_base.S
after the "Find HART index" loop and never enter sbi_init().

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-25 10:55:30 +05:30
Samuel Holland
7c40909159 firmware: Simplify FDT header endianness conversion
Reduce the code size by using single-byte loads instead of bit
manipulation. This method also does the right thing on (hypothetical)
big-endian systems.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-25 09:46:35 +05:30
Deepak Gupta
7179e36ce7 lib: sbi: fwft: implement landing pad and shadow stack fwft interface
Supervisor software can enable control flow integrity features for itself
using fwft feature `SBI_FWFT_LANDING_PAD` and `SBI_FWFT_SHADOW_STACK`.
This patch implements the mechanism to enable both these fwft.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
2024-09-23 19:02:48 +05:30
Deepak Gupta
110524441a lib: sbi: sw check exception delegation
zicfiss and zicfilp introduces new exception (cause=18). Delegate this
exception to S mode because cfi violations in U / S will be reported
via this exception.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
2024-09-23 18:59:24 +05:30
Deepak Gupta
c0804ed49a lib: sbi: add zicfilp/zicfiss and elp cfi state reflect back in status
This patch adds support to check for zicfilp / zicfiss extension.

zicfilp record status of hart's ELP state in *status csr. Missing landing
pad sets MPELP in mstatus. When SBI is redirecting back to S/VS/HS, SPELP
is set in sstatus/vsstatus.

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-09-23 18:58:04 +05:30
Deepak Gupta
6758a756c4 include: adding support for Zicfilp / Zicfiss encodings
Zicfilp / Zicfiss extension (see link) introduces b2 (LPE) in menvcfg CSR to
enable landing pads and b3 (SSE) in menvcfg CSR to enable shadow stack and
landing pad for privilege less than M. Additionally extension introduces new
bits in *status for recording landing pad state and a new exception type
`software check exception` with cause=0x12.

Link: https://github.com/riscv/riscv-cfi

Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-09-23 18:55:07 +05:30
Zong Li
570b9ae89a include: sbi_bitops: add ULL version for BIT and GENMASK
Add BIT_ULL and GENMASK_ULL for dealing with 64-bits data on
32-bits CPU, then we don't need to separate the operation to
low part and high part. For instance, the MMIO register is
64 bits wide.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-23 18:33:02 +05:30
Samuel Holland
040fcf49ab lib: sbi_domain_context: Fix file permissions
These C source files should not be marked as executable.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-23 18:26:47 +05:30
Samuel Holland
beef2f6937 lib: sbi: Respect scounteren when emulating the time CSR
This optimization creates a correctness issue, as it prevents supervisor
software from restricting VS-mode or U-mode access to the time CSR for
its own purposes.

Closes: https://github.com/riscv-software-src/opensbi/issues/370
Fixes: ebc8ebc0f8 ("lib: sbi: Improve HPM CSR read/write emulation")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-23 18:12:39 +05:30
Atish Patra
00093a2000 docs: Remove github PR as an option
OpenSBI development workflow is mailing list based from the
beginning. Initially, github PRs were added as an option but it turned
out that it is not feasible to support both github PR and mailing list
based workflows. Hence, all the PRs has been redirected to use the
mailing list from a long time. In fact, it is source of confusion to
have both options.

Update the documentation to reflect the reality.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-23 17:55:30 +05:30
Samuel Holland
1cb234b1c9 lib: sbi: fwft: add support for SBI_FWFT_POINTER_MASKING_PMLEN
Add support for controlling the pointer masking mode on harts which
support the Smnpm extension. This extension can only exist on harts
where XLEN >= 64 bits. This implementation selects the mode with the
smallest PMLEN that satisfies the caller's requested lower bound.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-23 17:50:40 +05:30
Samuel Holland
ebfaf1974e lib: sbi: Fix writes to emulated 32-bit htimedelta CSR
Writes to the low half CSR should not affect the high half of the value.
Make this separation explicit by writing to the delta in memory as two
adjacent XLEN-sized values.

Fixes: 1e9f88889f ("lib: Emulate HTIMEDELTA CSR for platforms not having TIME CSR")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-20 21:52:06 +05:30
Samuel Holland
65f04badf7 lib: sbi: Use a linked list to track domains
This removes the compile-time limit on the number of domains. It also
reduces firmware size by about 200 bytes by removing the lookup table.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-20 21:40:32 +05:30
Samuel Holland
792715e4f3 include: sbi_domain: Fix incorrect comments
These comments are inaccurate as of commit db56341dfa ("lib: sbi:
Allow platforms to provide root domain memory regions"), which modified
root domain registration to go through sbi_domain_register() like other
domains.

Fixes: db56341dfa ("lib: sbi: Allow platforms to provide root domain memory regions")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-09-20 21:16:41 +05:30
Anup Patel
c4940a9517 platform: generic: Fix fw_platform_coldboot_harts_init() function
It is possible that the OpenSBI config DT node is present but
the "cold-boot-harts" DT property is not present. In this case,
the fw_platform_coldboot_harts_init() will do nothing which
in-turn causes OpenSBI firmware hang at boot time.

To address the above issue, fallback to the default approach
when the "cold-boot-harts" DT property is not present.

Fixes: 67ce5a763c ("platform: generic: Add support for specify coldboot harts in DT")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-08-27 10:52:03 +05:30
Zhang RunMin
ef4520b1c6 lib: Delete redundant ulong
In `csr_read_allowed` and `csr_write_allowed` macros, has already
converted second param to `ulong`. So delete redundant `ulong`
where uses csr_read/write_allowed macros.

Signed-off-by: Zhang RunMin <runmin.zhang@ingenic.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 14:42:14 +05:30
Gregor Haas
b0ad9e0bdd lib: utils: fdt_domain: Make opensbi-domain optional in CPU node
The domain_support.md documentation states that "the HART to domain instance
assignment can be parsed from the device tree using *optional* DT property
opensbi-domain in each CPU DT node". However, the current implementation does
not treat this parameter as optional when determining which HARTs to assign to
a freshly discovered domain from the device tree, causing an effect where every
HART in the system must be explicitly assigned to a domain only if a domain is
specified in the device tree. Instead, this patch simply ignores CPUs that do
not specify a domain, and does not attempt to assign them into the recently
discovered domain.

Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 14:08:00 +05:30
Daniel Henrique Barboza
c5b6ebd141 Makefile: fix OPENSBI_VERSION_GIT build with submodules
When building OpenSBI via a submodule, OPENSBI_VERSION_GIT can be left
unset in case '.git' isn't a dir. This is the case when building OpenSBI
as a QEMU submodule:

$ cat .git
gitdir: ../../.git/modules/roms/opensbi

As a result, building OpenSBI tag v1.5.1 in QEMU will result in a binary
that will have "OpenSBI v1.5" as a banner.

Use "git rev-parse --git-dir" instead of checking if '.git' is a dir to
detect if the current dir is a git repo.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:59:05 +05:30
Clément Léger
70f3441452 lib: sse: remove unused sse_inject_out() parameter
This parameters was a remnant of a previous version, remove it now that
it is unused.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:15:58 +05:30
Yu Chien Peter Lin
a44df8024b util: atcsmu.c: modify sbi_printf() formatting
Beautify multi-line printing.

Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:10:36 +05:30
Leo Yu-Chi Liang
f7a625884c util: atcsmu.c: fix typo "%s/hard/hart/"
%s/hard/hart

Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:10:35 +05:30
Samuel Holland
8cb7f89d7c lib: utils/fdt: Add fdt_get_address_rw() helper
Help tracking the lifecycle of the FDT blob by indicating which parts of
the firmware modify it, and thus invalidate any previously-obtained
offsets or pointers to data inside the blob.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:03:04 +05:30
Samuel Holland
c36801841e lib: utils/serial: Pass the FDT to fdt_serial_init()
Indicate that this function does not modify the FDT blob, and
deduplicate the call to fdt_get_address().

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:03:01 +05:30
Samuel Holland
fa6dfce017 lib: utils/reset: Pass the FDT to fdt_reset_init()
Indicate that this function does not modify the FDT blob, and
deduplicate the call to fdt_get_address().

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:58 +05:30
Samuel Holland
6e5db7b09c platform: generic: Pass FDT to early/final_init overrides
Several of these override functions access the FDT blob. Explicitly
indicate which callbacks are allowed to modify the FDT blob by passing
the parameter as a possibly-const pointer. This also reduces code size
by deduplicating the call to fdt_get_address().

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:54 +05:30
Samuel Holland
3f964652d9 platform: generic: Constify FDT pointers in fw_platform_init()
Indicate that none of these functions modify the devicetree by
constifying the parameter type.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:51 +05:30
Samuel Holland
b15cc7715a lib: utils/timer: Constify FDT pointers in parsing functions
Indicate that none of these functions modify the devicetree by
constifying the parameter type.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:48 +05:30
Samuel Holland
bd76eb4950 lib: utils/serial: Constify FDT pointers in parsing functions
Indicate that none of these functions modify the devicetree by
constifying the parameter type.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:46 +05:30
Samuel Holland
57a0479302 lib: utils/reset: Constify FDT pointers in parsing functions
Indicate that none of these functions modify the devicetree by
constifying the parameter type.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:42 +05:30
Samuel Holland
1bbda9b26f lib: utils/regmap: Constify FDT pointers in parsing functions
Indicate that none of these functions modify the devicetree by
constifying the parameter type.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:39 +05:30
Samuel Holland
7df1c8126f lib: utils/irqchip: Constify FDT pointers in parsing functions
Indicate that none of these functions modify the devicetree by
constifying the parameter type.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:36 +05:30
Samuel Holland
d561418f22 lib: utils/ipi: Constify FDT pointers in parsing functions
Indicate that none of these functions modify the devicetree by
constifying the parameter type.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:33 +05:30
Samuel Holland
039e810437 lib: utils/i2c: Constify FDT pointers in parsing functions
Indicate that none of these functions modify the devicetree by
constifying the parameter type.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:28 +05:30
Samuel Holland
c585354380 lib: utils/gpio: Constify FDT pointers in parsing functions
Indicate that none of these functions modify the devicetree by
constifying the parameter type.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:27 +05:30
Samuel Holland
33ba4e0567 lib: utils/fdt: Constify FDT parsing functions
Distinguish between functions which modify the devicetree and those
which only extract information from it. Other than the iterators in
fdt_domain.c, this is a mechanical conversion.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:25 +05:30
Samuel Holland
f229a32828 lib: utils/regmap: Fix typo in comment
Balance the quotation marks; double quotes are idiomatic here.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:23 +05:30
Samuel Holland
bcb81f0cbe lib: utils/fdt: Fix fdt_add_cpu_idle_states() prototype
The function prototype should use the same parameter name as the
documentation and the function definition.

Fixes: 33bf917460 ("lib: utils: Add fdt_add_cpu_idle_states() helper function")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-24 13:02:21 +05:30
Yu Chien Peter Lin
56183ca609 lib: utils: fdt_domain: Use consistent device-tree address when next-arg1 is missing
The diagram shown below illustrates the boot-flow involving OP-TEE OS
initialization.

    (1)-----------+
     | U-Boot SPL |
     +------------+
         |
         v
    (2)-------------------------------------------------------------+
     | OpenSBI (fw_dynamic)                                         |
     |                (4)------------------------+                  |
     |                 | optee dispatcher driver |                  |
     +-----------------+-------^---------|-------+------------------+
M-mode   |                     |         |
---------+--[trusted domain]---+----.----+--[untrusted domain]-------
S-mode   |  (coldboot domain)  |    |    |
         v                     |    |    v
    (3)---------------------------+ |(5)----------------------------+
     | OP-TEE OS                  | | | U-Boot                      |
     +----------------------------+ | +-----------------------------+
                                    |    |
                                    |    v
                                    |(6)----------------------------+
                                    | | Linux                       |
                                    | +-----------------------------+

As OP-TEE OS has device-tree node fixups that need to be passed
through to the next boot stages, e.g. the reserved memory node:

  reserved-memory {
    #address-cells = <2>;
    #size-cells = <2>;
    ranges;
    optee_core@f1000000 {
      no-map;
      reg = <0x0 0xf1000000   // OP-TEE OS base address
             0x0 0x01000000>;
    };
    <...>
  };

Instead of using 0x0 as the default value, allow identical next-arg1
to be used by non-coldboot domain (i.e., untrusted domain) when the
property is not provided.

Also, update the description of next-arg1 property in the document.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-23 14:17:29 +05:30
Ben Zong-You Xie
3d1f53b173 platform: generic: andes: add a new Andes SBI call to free a PMA entry
Add a new Andes SBI call to free a PMA entry, and reset the memory
attributes for the corresponding NAPOT region.

Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-23 14:10:30 +05:30
Ben Zong-You Xie
aa56084c4d platform: generic: andes: add a new Andes SBI call to set up a PMA entry
Implement a new Andes SBI call, which is to set up a NAPOT region
with given memory attributes.

Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-23 14:08:19 +05:30
Ben Zong-You Xie
4a72abb5f4 platform: generic: andes: add Andes SBI call to probe Andes PMA feature
Add a new Andes SBI call to check whether PPMA is supported by hardware
or not.

Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-23 14:05:39 +05:30
Ben Zong-You Xie
17100394f9 platform: generic: Kconfig: add the description for Andes PMA feature
Describe Andes PPMA in the config option, and select it for AE350
platform.

Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-23 14:03:45 +05:30
Dongdong Zhang
d4322eebd0 lib: sbi: Enhance CSR Handling in system_opcode_insn
- Completed TODO in `system_opcode_insn` to ensure CSR read/write
  instruction handling.
- Refactored to use new macros `GET_RS1_NUM` and `GET_CSR_NUM`.
- Updated `GET_RM` macro and replaced hardcoded funct3 values with
  constants (`CSRRW`, `CSRRS`, `CSRRC`, etc.).
- Removed redundant `GET_RM` from `riscv_fp.h`.
- Improved validation and error handling for CSR instructions.

This patch enhances the clarity and correctness of CSR handling
in `system_opcode_insn`.

Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-23 13:36:49 +05:30
Gregor Haas
b9c091ed89 lib: sbi: Implement aligned memory allocators
This change adds a simple implementation of sbi_aligned_alloc(), for future use
in allocating aligned memory for SMMTT tables.

Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-09 08:51:27 +05:30
Gregor Haas
cda0014795 lib: sbi: Allocate from beginning of heap blocks
In the next commit, we'll add a new sbi_memalign() function. In order to
allocate aligned memory, we'll sometimes need to allocate from the middle of a
heap block, effectively splitting it in two. Allocating from the beginning of a
heap block in the nonaligned case more closely matches this behavior, reducing
the complexity of understanding the heap implementation.

Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-09 08:51:26 +05:30
Gregor Haas
8b898c4e50 lib: sbi: Support multiple heaps
The upcoming SMMTT implementation will require some larger contiguous memory
regions for the memory tracking tables. We plan to specify the memory region
for these tables as a reserved-memory node in the device tree, and then
dynamically allocate individual tables out of this region. These changes to the
SBI heap allocator will allow us to explicitly create and allocate from a
dedicated heap tied to the table memory region.

Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-09 08:51:24 +05:30
Carlos López
6a090ee9dc lib: sbi: check result of pmp_get() in is_pmp_entry_mapped()
pmp_get() may return an error if the given entry, given by the caller
of is_pmp_entry_mapped(), is invalid. This results in the output
parameters for pmp_get() being uninitialized. To avoid using garbage
values, check the result and return early if necessary.

This issue is not being hit because at the moment
is_pmp_entry_mapped() is only being called from a single site with a
valid hardcoded value.

Signed-off-by: Carlos López <carlos.lopezr4096@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-02 08:45:10 +05:30
Carlos López
41bb668315 lib: sbi: fwft: fix incorrect size passed to sbi_zalloc()
The fwt_hart_state struct inciludes a flexible array member, so its
allocation size will be that of the struct itself, plus that of each
of the members in the array. When calculating this size, instead of
taking the size of the struct, the size of a pointer to it was taken,
which is incorrect. Luckily, this happenned to not produce memory
corruption because the size of the non-flexible members of the struct
is the same as the size of a pointer.

Signed-off-by: Carlos López <carlos.lopezr4096@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-02 08:45:07 +05:30
Carlos López
d2353c9e22 lib: sbi: dbtr: fix potential NULL pointer dereferences
In several dbtr functions, we first check that the dbtr trigger is not
NULL and that its state is what we expect. However, it only makes
sense to perform the second check if the dbtr trigger is not NULL.
Othwerwise we will dereference a NULL pointer. Thus, change the
condition so that it shortcuts to the first check if necessary.

Signed-off-by: Carlos López <carlos.lopezr4096@gmail.com>
Reviewed-By: Anup Patel <anup@brainfault.org>
2024-08-02 08:45:05 +05:30
Eric Lin
df997c6e55 include: Adjust Sscofpmf mhpmevent mask for upper 8 bits
Currently, OpenSBI reserves the upper 16 bits in mhpmevent for
the Sscofpmf extension.

However, according to the Sscofpmf extension specification[1],
it only defines the upper 8 bits in mhpmevent for privilege mode
inhibit and counter overflow disable. Other bits are defined by
the platform for event selection.

Since vendors might define raw event encoding exceeding 48 bits in
mhpmevent, we should adjust the MHPMEVENT_SSCOF_MASK to support it.

Link: https://github.com/riscvarchive/riscv-count-overflow [1]
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-08-02 08:43:27 +05:30
Anup Patel
bb7267a07f lib: sbi: Introduce an early console buffer for caching early prints
The console device is registered by platform only in early_init()
callback so any prints before this point will be lost. Introduce an
early console buffer for caching prints before platform early_init().

For crashes before platform early_init(), users can simply dump the
contents of the console_early_buffer[] string using a debugger. The
relative address of the console_early_buffer[] string can be found
using following two commands:

CONSOLE_EARLY_FIFO_ADDR=`${CROSS_COMPILE}objdump -D \
build/platform/generic/firmware/fw_dynamic.elf | \
grep "<console_early_fifo>:" | awk '{print $1}'`

${CROSS_COMPILE}objdump -R build/platform/generic/firmware/fw_dynamic.elf | \
grep $CONSOLE_EARLY_FIFO_ADDR | awk '{print $3}'

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-07-24 12:18:41 +05:30
Anup Patel
d35c76a766 include: sbi: Add macros to create FIFO as local or global variable
The FIFO data structure is quite handy of variety of use-case so add
SBI_FIFO_INITIALIZER() and SBI_FIFO_DEFINE() helper macros to create
FIFO as local or global variable.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-07-24 12:18:39 +05:30
Anup Patel
94c3c53a56 lib: sbi: Allow forceful queueing of data in sbi_fifo_enqueue()
Extend sbi_fifo_enqueue() to allow forceful queueing by droping
data from the tail.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-07-24 12:18:36 +05:30
Anup Patel
9a275fc153 lib: sbi: Optimize fifo enqueue/dequeue for basic data types
Don't use sbi_memcpy() for basic data types in fifo enqueue/dequeue
instead use direct type-cast and assignment.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-07-24 12:18:35 +05:30
Anup Patel
119b15a553 lib: sbi: Remove sbi_console_init() and console_init() platform callback
Now that all platforms have been updated to initialize serial console
device in early_init(), the sbi_console_init() and console_init()
platform callback are redundant hence remove them.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-07-24 12:18:33 +05:30
Anup Patel
9e8a18fd0d platform: Setup serial console device in early_init()
The sbi_console_init() does not do any special initialization so
setup serial console device in early_init() so that console prints
work as early as possible.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-07-24 12:18:31 +05:30
Samuel Holland
4afb57c9eb lib: sbi_hsm: Save/restore menvcfg only when it exists
Attempting to access the menvcfg CSR raises an illegal instruction
exception on hardware which implements Sm1p11 or older.

Fixes: e9ee9678ba ("lib: sbi: fwft: add support for SBI_FWFT_PTE_AD_HW_UPDATING")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-07-24 10:42:46 +05:30
Conor Dooley
f7a92f6b67 lib: utils/fdt: Add support for parsing riscv,isa-extensions
A new property has been added, with an extensive rationale at [1], that
can be used in place of "riscv,isa" to indicate what extensions are
supported by a given platform that is a list of strings rather than a
single string. There are some differences between the new property,
"riscv,isa-extensions" and the incumbent "riscv,isa" - chief among them
for the sake of parsing being the list of strings, as opposed to a
string. Another advantage is strictly defined meanings for each string
in a dt-binding, rather than deriving meaning from RVI standards. This
may likely to some divergence over time, but, at least for now, there's
no relevant differences between the two for an M-Mode program.

Add support for the new property in OpenSBI, prioritising it, before
falling back to the, now deprecated, "riscv,isa" property if it is not
present.

Link: https://lore.kernel.org/all/20230702-eats-scorebook-c951f170d29f@spud/ [1]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-07-23 11:12:56 +05:30
Dongdong Zhang
b7e7e66026 lib: tests: add math test suite
This patch introduces a new math test suite to the SBI unit
tests. The changes include:

* Updating lib/sbi/tests/objects.mk to include
  math_test_suite and sbi_math_test.o.
* Adding a new file lib/sbi/tests/sbi_math_test.c which
  contains tests for log2roundup function using various cases.

The addition of this test suite ensures that mathematical
functions are verified and work as expected.

Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-07-23 10:17:51 +05:30
Dongdong Zhang
c5c1d04346 lib: tests: enhance test output with colored pass/fail messages
This patch improves the readability of the SBI unit test
output by adding color-coded status messages.

Adding ANSI color codes for green (pass) and red (fail)
in sbi_unit_test.c.

Now, the test results will be displayed in green for passed
tests and red for failed tests, making it easier to quickly
distinguish between them.

Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-07-23 10:13:50 +05:30
Ivan Orlov
0a66754295 docs: writing tests: update cleaning instructions
After the changes introduced by the previous patches are applied, there
is no need of the manual removal of the `build/` directory every time
new test is added. Running `make clean` should be enough to regenerate
the carray-related files.

Update the documentation correspondingly.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-07-04 12:11:52 +05:30
Ben Dooks
1ede0cab0e Makefile: remove any .carray.c during clean
Now we've renamed the carray output files to .carray.c
we can now use find to remove them.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-07-04 12:11:50 +05:30
Ben Dooks
fd9e8b17ed Makefile: change to using .carray.c for carray files
We would like to clean any files generated by the carray
scripts by just searching for the filename as the current
make system turns f.carray into f.o. Change to make the
make system turn f.carray into f.carray.o

note, command to go through .mk files changing the .o
in the .mk files is:
find . -type f -name "*.carray" | xargs -t -I fname /bin/bash -x -c ' fn=`basename -s .carray fname`; echo "$fn"; sed -i `dirname fname `/objects.mk -e s/"$fn".o/"$fn".carray.o/g'

Link: https://patchwork.ozlabs.org/project/opensbi/patch/20240401213438.590209-2-ivan.orlov0322@gmail.com/
Reported-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-07-04 12:11:45 +05:30
Ivan Orlov
75ad25ab59 scripts/carray.sh: Add comment to generated files
Add a comment about where auto-generated file came from to the carray.sh
output. This should help avoiding confusion for the developers looking
at the build artifacts and finding .c files there.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-07-04 10:52:37 +05:30
Samuel Holland
d8608e615f lib: sbi_emulate_csr: Do not log illegal CSR accesses
Illegal CSR accesses from lower privilege modes are delegated to S-mode
and do not necessarily indicate a bug. Supervisor software may want to
emulate some CSRs, or may intentionally disable access to certain
existing CSRs, and thus will expect traps when those CSRs are accessed.

For example, Linux disables sstatus.VS by default in order to detect
when userspace first accesses vector register state; this includes the
CSRs defined by the V extesion. As a result, if the first vector
instruction in a process is a CSR access, OpenSBI will log the illegal
instruction exception, even though there is no unexpected or erroneous
behavior occurring.

Since the illegal instruction exception is delegated to S-mode, S-mode
software should be responsible for reporting the exception, not OpenSBI.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-07-04 10:42:16 +05:30
Dongdong Zhang
c531adbf08 .github: Add repo lockdown GitHub workflow and update .gitignore
This commit adds a new GitHub Actions workflow for repository
lockdown. The workflow triggers when a pull request is opened, and it
notifies the contributor to use the OpenSBI mailing list for patch
reviews.

Additionally, the .gitignore file is updated to include the .github
directory.

Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Anup Patel <anup@branifault.org>
2024-07-04 10:31:39 +05:30
Anup Patel
455de672dd include: Bump-up version to 1.5
This patch updates OpenSBI version to 1.5 as part of
release preparation.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
2024-06-30 14:03:26 +05:30
Sergey Matyukevich
23b7badeee lib: sbi: check incoming dbtr shmem address
Current Debug Trigger SBI extension proposal suggests to activate
shmem area and obtain its physical address from S-mode software
in the following way:

: If both `shmem_phys_lo` and `shmem_phys_hi` parameters are not
: all-ones bitwise then `shmem_phys_lo` specifies the lower XLEN
: bits and `shmem_phys_hi` specifies the upper XLEN bits of the
: shared memory physical base address. The `shmem_phys_lo` MUST
: be `(XLEN / 8)` byte aligned and the size of shared memory is
: assumed to be `trig_max * (XLEN / 2)` bytes.

For more details see the current version of the proposal:
- https://lists.riscv.org/g/tech-debug/message/1302

On the other hand, on RV32, the M-mode can only access the first 4GB of
the physical address space because M-mode does not have MMU to access
full 34-bit physical address space. Similarly, on RV64, the M-mode can
only access memory addressed by 64 bits.

This commit checks shmem address in function sbi_dbtr_setup_shmem
to make sure that shmem_phys_hi part of the valid address is zero.
Besides, the macro DBTR_SHMEM_MAKE_PHYS is updated to take into
account only low XLEN part.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-06-28 08:36:46 +05:30
Jacob Lin
0e45b63471 docs: Fix wrong filename
Correct the compiled FW_PAYLOAD firmware ELF filename.

Signed-off-by: Jacob Lin <lovetaeyeon507@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-28 08:34:15 +05:30
Clément Léger
caae2f7d45 lib: sbi: fwft: return SBI_EINVAL rather than SBI_ERR_INVALID_PARAM
Error code returned by the ecall handles should use the defines from
sbi_ecall_interface.h rather than sbi_error.h.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-26 18:14:49 +05:30
Clément Léger
e8717d1264 lib: sbi: fwft: check feature value to be exactly 1 or 0
As stated by the spec and pointed out by Andrew Jones, the value passed
for MISALIGNED_EXC_DELEG and PTE_AD_HW_UPDATING should be either 0 or 1.
Add check for these values and return SBI_EINVAL if not.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-26 18:13:54 +05:30
Clément Léger
ecef14d573 lib: sbi: implement SBI FWFT extension
The SBI FWFT extension defines a set of function that can be called
to control the configuration of some platform features (misaligned
trap delegation, etc). This patch implements sbi_fwft_set() and
sbi_fwft_get() as defined in the specification [1].

Link: https://lists.riscv.org/g/tech-prs/message/924 [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-19 18:15:28 +05:30
Clément Léger
e9ee9678ba lib: sbi: fwft: add support for SBI_FWFT_PTE_AD_HW_UPDATING
Add support for SBI_FWFT_PTE_AD_HW_UPDATING based on SVADU presence.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-19 18:11:26 +05:30
Clément Léger
c97a1d5891 lib: sbi: fwft: add support for SBI_FWFT_MISALIGNED_EXC_DELEG
Add support for SBI_FWFT_MISALIGNED_EXC_DELEG withing FWFT support. This
support allows to delegate misaligned accesses traps.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-19 18:10:36 +05:30
Clément Léger
aa5a859369 lib: sbi: add support for firmware features extension
This extension allows the software running in supervisor mode to control
the behavior of various features of the SBI [1]. Implement the support
for such extension.

Link: https://lists.riscv.org/g/tech-prs/message/924 [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-19 18:09:22 +05:30
Yong-Xuan Wang
53844c98d0 lib: sbi: Add support for Svade and Svadu extensions
Add support for Svade and Svadu extensions. When both are present in the
device tree, the M-mode firmware should select the Svade extension
to comply with the RVA23 profile, which mandates Svade and lists Svadu as
an optional extension.

Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-18 16:41:32 +05:30
Ben Zong-You Xie
52dcf351cd platform: generic: andes: Add support for RV32 to set up PMA
Like PMP, the behaviors to configure PMA will be different from
RV64 and RV32. RV64 uses two Andes custom CSRs, pmacfg0 and pmacfg2,
but RV32 uses four Andes custom CSRs, pmacfg0 ~ pmacfg3. This patch
adds support to PMA for RV32.

Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-18 16:19:47 +05:30
Ben Zong-You Xie
f09f16430a platform: generic: andes: Refine Andes PMA related code
This patch refines the Andes PMA related code. The main change is
refactor andes_pma_[read|write]_cfg() and andes_pma_[read|write]_addr()
into new functions andes_pma_[read|write]_num().

Also, fix some coding style problems.

Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-18 16:15:22 +05:30
Gabriel Somlo
7830e98785 lib: serial: fix RX path in litex-uart
When used to read characters from the terminal (e.g., when the SBI
console is used via ecall from linux with `console=hvc0`), we must
acknowledge receipt of each character to "pop" it off the LiteUART
hardware queue, and allow the next character to be made available.

Fixes: 52af6e4b ("lib: utils: Add LiteX UART support")
Suggested-by: Dolu1990 <charles.papon.90@gmail.com>
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-13 21:54:09 +05:30
Xiang W
62e178a0a7 lib: utils/reset: Try initializing all reset devices in dt
In DT, multiple reset devices may use the same driver, and they
may have different priorities. If rc is returned after the first
initialization, the highest priority device may be lost.

Fixes: a73ff043e9 (lib: utils/reset: Fix fdt_reset to search for more dt nodes)
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-13 21:48:03 +05:30
Yu Chien Peter Lin
3a94a32580 sbi: sbi_domain_context: Fix trap context for domain context switching
Save/restore sbi_trap_context during domain context switching to
ensure proper trap handling and isolation. This maintains correct
domain-specific state, avoiding context corruption.

Fixes: abea949721 ("lib: sbi: Introduce trap context")
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Alvin Chang <alvinga@andestech.com>
Tested-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Yong Li <yong.li@intel.com>
Tested-by: Yong Li <yong.li@intel.com>
2024-06-13 19:21:27 +05:30
Xiang W
a73ff043e9 lib: utils/reset: Fix fdt_reset to search for more dt nodes
If there are multiple dt nodes, the previous code only tries to match
the first one, which may lose initialization.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-13 18:49:51 +05:30
Xiang W
b5c984bd08 lib: utils/reset: Skip initialize reset when dt is not enabled
When the dt node has a status property and the value is not ok or
okay, skip initializing reset.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-13 18:40:38 +05:30
Xiang W
86bbe6c52f lib: utils/serial: Fix fdt_serial to match more dt nodes
If there are multiple dt nodes, the previous code only tries to match
the first one, which may lose initialization.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-13 18:39:37 +05:30
Xiang W
179e00a320 lib: utils/serial: Skip initialize serial when dt is not enabled
When the dt node has a status property and the value is not ok or
okay, skip initializing serial.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-13 18:36:49 +05:30
Xiang W
b1c7c750f7 lib: utils/irqchip: Skip initialize irqchip when dt is not enabled
When the dt node has a status property and the value is not ok or
okay, skip initializing irqchip.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-13 18:33:52 +05:30
Xiang W
5e3ad7d577 lib: utils/timer: Skip initialize timer when dt is not enabled
When the dt node has a status property and the value is not ok or
okay, skip initializing timer.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-13 18:31:40 +05:30
Xiang W
c5be0e1ed1 lib: utils/ipi: Skip initialize ipi when dt is not enabled
When the dt node has a status property and the value is not ok or
okay, skip initializing ipi.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-06-13 18:30:27 +05:30
Anup Patel
df3db6a901 lib: utils/fdt: Fix DT property for APLIC delegation
During Linux AIA driver review, the APLIC DT property for interrupt
delegation was renamed to "riscv,delegation" so let's use the new DT
property name and fallback to old DT property name if the new DT
property name is not available.

Fixes: 34612193af ("lib: utils/irqchip: Add FDT based driver for APLIC")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-06-05 10:54:59 +05:30
Inochi Amaoto
d962db2807 lib: utils/gpio: respect flag GPIO_FLAG_ACTIVE_LOW
"gpio-poweroff" and "gpio-restart" always set gpio to high to
active the function, but some chips need a low signal to active.
Fortunately, it can be achieved by setting GPIO_FLAG_ACTIVE_LOW
for the gpio. Implement this flag support for the gpio library
so the gpio reset can function well.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-23 15:42:52 +05:30
Clément Léger
ae5ef1848d lib: sbi: sse: handle missing writable attributes
The spec states that a6, a7, flags and sepc are writable but the
implementation was not allowing that. Add support for these 4 writable
attributes.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-23 10:53:02 +05:30
Cyan Yang
858754a544 lib: utils/irqchip: Add sanity checks in imsic_get_data() and imsic_get_target_file()
Add extra sanity checks to prevent the caller getting the invalid result from
imsic_get_data() or imsic_get_target_file() when imsic is not initialized
correctly.

Signed-off-by: Cyan Yang <cyan.yang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-23 10:51:29 +05:30
Anup Patel
96f0a2e3ea firmware: Bring back FW_TEXT_START as an optional parameter
Bring back FW_TEXT_START as an optional parameter to allow users
explicitly specify compile time address for loading debug symbols.
When not specified, the FW_TEXT_START is assumed to be 0.

Fixes: d4d2582eef ("firmware: remove FW_TEXT_START")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Clément Léger <cleger@rivosinc.com>
2024-05-23 10:50:23 +05:30
Cheng Yang
e3a30a2c91 lib: utils/irqchip: Check before initializing imsic
The current mlevel imsic check is only for the platform, which
may cause hart without imsic in the platform to trigger an
illegal instruction exception when initializing imsic. For
example, the platform contains a management hart that only
supports wired interrupts.

This patch will check if each hart supports Smaia extension
before doing imsic initialization to avoid triggering illegal
instruction exceptions.

Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-16 10:21:16 +05:30
Inochi Amaoto
2bed4c1c57 platform: generic: thead: add Sophgo CV18XX/SG200X series
The Sophgo CV18XX/SG200X series SoCs have a standard C906
core. Add support for it.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-16 10:18:44 +05:30
Anup Patel
533067d182 lib: sbi: Put event after use in sbi_sse_exit() loop
Currently, the sbi_sse_exit() gets event in a loop but does not put
it back after use. This results in global events remaining locked
causing hangs on sub-sequent calls to sse_event_get() for global
events.

Fixes: c8cdf01d8f ("lib: sbi: Add support for Supervisor Software Events extension")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-05-15 11:54:43 +05:30
Inochi Amaoto
ea9cf6aa28 utils/reset: Add SG2042 hwmon MCU support.
SG2042 uses an onboard MCU to provide reset function.
Add reset driver to support this onboard MCU.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-15 11:47:15 +05:30
Xiang W
1cb792d606 lib: sbi: simplify inline function in sbi_dtbr.c
The inline function can simplify the code by setting some call
restrictions. This ensures logical smoothness

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-13 16:50:49 +05:30
Xiang W
7b37da3cb0 lib: sbi: fix return type of sbi_dbtr_shmem_disabled
Modify the return value of the sbi_dbtr_shmem_disabled function to
bool to make the semantics clearer.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-13 16:40:05 +05:30
Xiang W
e065c3cd5d lib: sbi: Fixed memory permission check in sbi_dbtr_setup_shmem
The previous code detected shmem_phys_hi and shmem_phys_lo as two
addresses. fix this bug

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-05-13 16:39:39 +05:30
Xiang W
7f54527029 lib: sbi: fix DBTR_SHMEM_MAKE_PHYS for RV64
Obtaining a 64-bit address under rv64 does not require combining
32-bit registers

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-05-13 16:38:35 +05:30
Xiang W
744f495653 lib: sbi: Removal unnecessary check dbtr_thishart_state_ptr
After getting hart_shmem_base, dbtr_thishart_state_ptr cannot be
empty. So remove check code.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-05-13 16:37:56 +05:30
Xiang W
4953bd721a lib: sbi: fix hart_shmem_base
When only phys_hi is equal to SBI_DBTR_SHMEM_INVALID_ADDR, it may be
a legal address. The old code would modify the legal address.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
2024-05-13 16:35:20 +05:30
Yangyu Chen
019a8e69a1 platform: generic: thead: add Canaan Kendryte K230
Canaan Kendryte K230 SoC has T-Head C908 cores inside. The dt-binding has
been merged into the linux kernel [1]. However, it has early version of
C908 core which does not have Sscofpmf and need to use T-Head PMU
extension. Thus, we add a K230 compatible string to thead_generic_match
and set quirk for T-Head PMU.

[1] https://lore.kernel.org/linux-riscv/tencent_4D85743622F39109466913393EE2F6C5980A@qq.com/

Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-09 18:10:25 +05:30
Yangyu Chen
33e21c9476 platform: generic: thead: separate T-Head PMU Errata
As Guo Ren said from the kernel mailing list [1], future T-Head CPUs,
including the newer versions of T-Head C908, will feature standard
Sscofpmf extension. For these CPUs, T-Head's implementation of PMU
Overflow Interrupts may not needed anymore. In this case, we shouldn't
apply T-Head PMU for all T-Head CPUs. Thus, this patch separated T-Head PMU
errata.

[1] https://lore.kernel.org/linux-riscv/Zh9sUUUT09LZb0MO@gmail.com/

Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-09 18:09:05 +05:30
Ben Zong-You Xie
2b93ce0954 platform: andes: Change all occurrences of andes45 to andes
To make the framework suit all Andes CPUs, change all occurrences of
andes45 to andes.

In addition, we fix some coding style problems and remove an unused
macro in andes.h.

Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-09 17:57:51 +05:30
Ben Zong-You Xie
f68b3aed9d platform: andes: Rename files with the prefix andes45
Rename files with the prefix andes45 to andes.

Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-09 17:56:50 +05:30
Alvin Chang
17e829129d sbi: sbi_domain_context: Add spinlock for updating domain assigned_harts
Add spinlock protection to avoid race condition on assigned_harts
during domain context switching. Also, rename/add variables for
accessing the corresponding domain of target/current context.

Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 20:11:30 +05:30
Pope B.Lei
1d89a9da64 lib: sbi: Refine the settings for switching to Virtual Supervisor Mode.
Although Mstatus.MPV is set, before executing mret, access to VS mode
registers should use the actual register addresses, not the pseudonyms
of S registers.

Signed-off-by: Pope B.Lei <popeblei@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 18:12:24 +05:30
Clément Léger
033104da08 lib: sbi: sse: check handler entry to belong to supervisor mode
When registering an SSE event, check for the handler_entry_pc to belong
to supervisor mode domain using sbi_domain_check_addr_range().

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 17:31:08 +05:30
Clément Léger
bd007658f8 lib: sbi: sse: use PRV_S instead of hardcoded value for mode
Rather then passing 1 to sbi_domain_check_addr_range() for supervisor
mode, use PRV_S.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 17:29:36 +05:30
Clément Léger
ce3c82cb2e lib: sbi: sse: call enable callback before sending IPI
Move the enable callback call before sending the IPI. Even though the
event is locked and no race condition can happen, this is more logical.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 17:28:44 +05:30
Clément Léger
d528dbfd4b lib: sbi: sse: remove superfluous sbi_list_empty() check
The list loop below that check is actually not looping if the list is
empty so there was no need for this check.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 17:27:31 +05:30
Clément Léger
22ff75099c lib: sbi: sse: simplify 32bits overflow check
Rather than checking 32bits overflow with some absolute value, check the
value to be different from the cast itself.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 17:26:14 +05:30
Clément Léger
7aa80ea495 lib: sbi: sse: rename sse_hart_unlock() to sse_enabled_event_unlock()
There was a naming incoherency between enabled events list lock/unlock.
Rename sse_hart_unlock() to sse_enabled_event_unlock() to be coherent
and reword comments above lock()/unlock() functions.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 17:25:28 +05:30
Clément Léger
c21c99db6a lib: sbi: sse: fix typos, comments and spacing errors
Fix some errors spotted by Samuel while reviewing the SSE implementation.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 17:24:11 +05:30
Ivan Orlov
7b1ed968e4 lib: tests: Add test for spinlocks
Implement the test which covers some of the functions from the
`riscv_locks.h` file. This test consists of 3 test cases:

1) For lock/unlock functions
2) Unsuccessful trylock (the lock was previously taken)
3) Successful trylock (the lock is free and can be taken)

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 11:27:30 +05:30
Ivan Orlov
7bdf41ad1e lib: tests: Add test for atomic_t
Implement the test which covers some of the functions from the
`riscv_atomic.h` header file. The test contains 9 test cases:

1) atomic read/write test
2) add/return test
3) sub/return test
4) cmpxchg test
5) atomic_xchg test
6) atomic_raw_set_bit test
7) atomic_raw_clear_bit test
8) atomic_set_bit test
9) atomic_clear_bit test

Some of the test cases operate on the `test_atomic` variable. It gets
initialized in the suite init function.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 11:27:29 +05:30
Ivan Orlov
f6243d9ce5 lib: tests: Add test suite init function
Allow to define an init function for the test suite. It could help us
to initialize global variable once, and use them in multiple test cases
after the initialization.

For instance, if multiple test cases use the same atomic_t var, it
could be helpful to call ATOMIC_INIT once during the suite
initialization.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-05-07 11:27:13 +05:30
Xiang W
d4d2582eef firmware: remove FW_TEXT_START
Now opensbi can run at any address via dynamic relocation. We can
remove FW_TEXT_START.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
2024-04-10 09:50:24 +05:30
Heinrich Schuchardt
73344d4724 lib: utils: check correct value in fdt_node_offset_by_compatible
After calling fdt_node_offset_by_compatible() we must check its return
value and not an unrelated value.

Addresses-Coverity-ID: 1584993 Logically dead code
Fixes: 67ce5a763c ("platform: generic: Add support for specify coldboot harts in DT")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-10 09:38:26 +05:30
Heinrich Schuchardt
37e1544a86 lib: sbi: sse_event_get() may return NULL
sse_event_get() may return NULL. We should not dereference the return value
in sbi_sse_exit() without checking.

Fixes: c8cdf01d8f ("lib: sbi: Add support for Supervisor Software Events extension")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-10 09:38:24 +05:30
Clément Léger
68bc031a76 lib: sbi: Add missing sscrind and sscfg extensions in sbi_hart_ext[]
The sbi_hart_ext[] array is missing these two extensions ids. It is
expected that this array contains all the extensions declaration at the
same index of the SBI_HART_EXT_* define. Without this, when adding a new
extension, there is a mismatch between ids and extension names and it
can even display corrupted extension names.

Addresses-Coverity-ID: 1584994 Out-of-bounds read
Fixes: 6bb6b61c27 ("lib: sbi: Add support for smcsrind and smcdeleg")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-10 09:33:58 +05:30
Samuel Holland
a7c5c2cbd2 Makefile: Remove unnecessary dependencies
The rule included from auto.conf.cmd adds a dependency on every Kconfig
file, so these two Kconfig files do not need to be specified again here.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
2024-04-08 10:08:20 +05:30
Samuel Holland
268feab294 Makefile: Respect manual changes to .config
The .config file may be manually edited or copied from another location.
Since genconfig.py is responsible for generating auto.conf (the Makefile
fragment) and autoconf.h (the C header) from .config, it must be run any
time .config changes, not just when running menuconfig.

Fixes: 662e631cce ("Makefile: Add initial kconfig support for each platform")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
2024-04-07 12:05:37 +05:30
Yu Chien Peter Lin
29ecda9c20 sbi: sbi_domain_context: Check privilege spec version before accessing S-mode CSRs
SCOUNTEREN and SENVCFG may not be supported on certain RISC-V core,
so check the existence of these CSRs via privilege spec version to
prevent illegal instructions.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-05 18:02:29 +05:30
Anup Patel
7862c244bc lib: sbi: Wakeup non-coldboot HARTs early in the coldboot path
Currently, all non-coldboot HARTs busy spin in wait_for_coldboot()
until the entire coldboot init sequence is completed.

This means:
1) On QEMU, all non-coldboot HARTs will eat host CPU time and
   also slow down the coldboot HART until the entire coldboot
   init sequence is completed.
2) On real HW, all non-coldboot HARTs will consume more CPU
   power until the entire coldboot init sequence is completed.

To address this, wake up all non-coldboot HARTs as early as
possible in the coldboot init sequence.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-04-05 17:48:25 +05:30
Anup Patel
beb0cd177f lib: sbi: Simplify wait_for_coldboot() implementation
On QEMU virt machine with large number of HARTs, some of the HARTs
randomly fail to come out of wait_for_coldboot() due to one of the
following race-conditions:

1) Failing HARTs are not able to acquire the coldboot_lock and
   update the coldboot_hartmask in wait_for_coldboot() before
   the coldboot HART acquires the coldboot_lock and sends IPI
   in wake_coldboot_harts() hence the failing HARTs never
   receive IPI from the coldboot HART.

2) Failing HARTs acquire the coldbood_lock and update the
   coldboot_hartmask before coldboot HART does sbi_scratch_init()
   so the sbi_hartmask_set_hartid() does not update the
   coldboot_hartmask on the failing HARTs hence they never
   receive IPI from the coldboot HART.

To address this, use a simple busy-loop in wait_for_coldboot() for
polling on coldboot_done flag.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
2024-04-05 17:48:23 +05:30
Samuel Holland
f5375bc15e platform: generic: allwinner: Optimize current hart scratch access
The address of the local scratch area is stored in each hart's mscratch
CSR. It is more efficient to read the CSR than to compute the address
from the hart ID.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-05 17:34:25 +05:30
Samuel Holland
b94396c7dd lib: utils/timer: Optimize current hart scratch access
The address of the local scratch area is stored in each hart's mscratch
CSR. It is more efficient to read the CSR than to compute the address
from the hart ID.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-05 17:34:24 +05:30
Vivian Wang
5c9a73565f include: sbi: Support byteorder macros in assembly
Avoid using C types and casts if sbi/sbi_byteorder.h is included in
assembly code

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-05 17:23:51 +05:30
Clément Léger
06fc453ec1 lib: sbi: Add SSE support for PMU events
Add SSE callbacks registration to PMU driver in order to disable
interrupt delegation for PMU interrupts. When interrupts are
undelegated send the PMU SSE event upon LCOFIP IRQ.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-05 17:09:39 +05:30
Clément Léger
09ad21445f lib: sbi: Implement SBI SSE extension
The SBI SSE extension defines a set of function that can be called to
register and handle supervisor sofwtare events. This patch implements
all of the functionality defined in the specification.

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-05 15:49:02 +05:30
Clément Léger
c8cdf01d8f lib: sbi: Add support for Supervisor Software Events extension
This extension [1] allows to deliver events from SBI to supervisor via
a software mechanism. This extension defines events (either local or
global) which are signaled by the SBI on specific signal sources (IRQ,
exceptions, etc) and are injected to be executed in supervisor mode.

[1] https://lists.riscv.org/g/tech-prs/message/798

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-05 15:47:30 +05:30
Xiang W
76d7e9b8ee firmware: remove copy-base relocation
Remove copy-base relocations that are no longer needed.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-04-05 15:05:25 +05:30
Christoph Müllner
5186da687d platform: generic: allwinner: sun20i-d1: Remove duplicated CSR definitions
All T-Head CSRs are already defined in thead/c9xx_encoding.h.
Let's reuse the values from there instead of redefining them with
a slightly different name.

Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-20 11:05:13 +05:30
Ivan Orlov
3b2f89e3d6 docs: writing_tests: Make docs correspond the latest changes
We should store test object files list in the `libsbi-objs-y` Makefile
variable, not in `libsbitests-objs-y`. Update the documentation
correspondingly.

Since we don't use the `console_dev` static variable directly in the
`sbi_console_test` unit test anymore, remove the paragraph which says
that we do.

Fixes: 86224ec36a ("docs/writing_tests: Update tests paths")
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-20 11:02:58 +05:30
Anup Patel
f7d0050755 lib: sbi: Extend sbi_trap_error() to dump state in a nested trap
The sbi_trap_error() should dump state of all in-flight traps upon
failure in a nested trap so extend it accordingly.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
2024-03-19 11:31:41 +05:30
Anup Patel
5b11f16c3c lib: sbi: Pass trap context pointer to sbi_ecall_handler()
To be consistent with other trap handlers, pass trap context pointer
to sbi_ecall_handler().

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
2024-03-19 11:31:39 +05:30
Anup Patel
43d346c0c1 lib: sbi: Remove regs parameter from trap irq handling functions
The trap irq handling functions no longer require regs parameter
so remove it.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
2024-03-19 11:31:35 +05:30
Anup Patel
d84e7eb7f0 lib: sbi: Remove regs paramter of sbi_irqchip_process()
The irqchip handlers will typically not need pointer to trap registers
so remove regs parameter of sbi_irqchip_process().

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
2024-03-19 11:31:33 +05:30
Anup Patel
f414cf931e lib: sbi: Simplify parameters of sbi_illegal_insn_handler()
The struct sbi_trap_context already has the information needed by
sbi_illegal_insn_handler() so directly pass struct sbi_trap_context
pointer to this function.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
2024-03-19 11:31:31 +05:30
Anup Patel
fea33a9334 lib: sbi: Simplify parameters of misaligned and access fault handlers
The struct sbi_trap_context already has the information needed by
misaligned load/store and access fault load/store handlers so directly
pass struct sbi_trap_context pointer to these functions.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
2024-03-19 11:31:28 +05:30
Anup Patel
abea949721 lib: sbi: Introduce trap context
Club the struct sbi_trap_regs and struct sbi_trap_info a new
struct sbi_trap_context (aka trap context) which must be saved
by low-level trap handler before calling sbi_trap_handler().

To track nested traps, the struct sbi_scratch points to the current
trap context and the trap context has pointer to pervious context
of previous trap.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
2024-03-19 11:31:22 +05:30
Anup Patel
60ffc154c8 include: sbi: Add trap_context pointer in struct sbi_scratch
To track nested traps, the struct sbi_scratch needs a pointer the
current trap context so add trap_context pointer in struct sbi_context.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
2024-03-19 11:31:20 +05:30
Anup Patel
ebb697ad8c lib: sbi: Remove sbi_trap_exit() and related code
Over the years, no uses of sbi_trap_exit() have been found so remove
it and also remove related code from fw_base.S and sbi_scratch.h.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
2024-03-19 11:31:18 +05:30
Samuel Holland
2e8517865a lib: sbi: Remove epc from struct sbi_trap_info
In the only places this value is used, it duplicates mepc from
struct sbi_trap_regs.

Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-19 11:31:16 +05:30
Ivan Orlov
86224ec36a docs/writing_tests: Update tests paths
Since the tests should be moved to the lib/sbi/tests directory, the
documentation should be updated correspondingly. So, update the paths
where they have to be changed.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-19 11:20:49 +05:30
Ivan Orlov
5c992a115a lib: tests: Move tests to a separate directory
Move all of the SBIUnit-related code into the lib/sbi/tests directory.
Update 'Makefile' to index objects from the tests subdirectory.

I don't think creating the full separate list of Makefile variables
(libsbitests-objs-path-y, libsbitests-object-mks, etc. as it is done for
libsbiutils) is necessary for the tests because:

1) `lib/sbi/tests/objects.mk` is already indexed into
'libsbi-objects-mks' since the find expression for the libsbi-object-mks
variable looks for objects.mk files in the nested directories as well).

2) Tests are tightly coupled with the `lib/sbi/` sources, therefore it
may be reasonable to store the list of lib/sbi and lib/sbi/tests object
files together in the libsbi-objs-path-y variable.

Additionally, update relative paths in the tests where necessary.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-19 11:20:40 +05:30
Bo Gan
81e3ba77a6 lib: sbi: call platform load/store emulators
sbi_load/store_access_handler now tries to call platform emulators
if defined. Otherwise, redirects the fault. If the platform code
returns failure, this means the H/S/U has accessed the emulated
devices in an unexpected manner, which is very likely caused by
buggy code in H/S/U. We redirect the fault, so lower privileged
level can get notified, and act accordingly. (E.g., oops in Linux)

We let the handler truly fail if the trap was originated from M mode.
In this case, something must be very wrong and we should just fail.

Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-11 10:56:02 +05:30
Bo Gan
ddf3b649f1 include: sbi: add emulate_load/store handler to platform ops
This patch allows the platform to define load/store emulators. This
enables a platform to trap-and-emulate special devices or filter
access to existing physical devices.

Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-11 10:54:14 +05:30
Bo Gan
4c112650bb lib: sbi: abstract out insn decoding to unify mem fault handlers
This patch abstracts out the instruction decoding part of misaligned ld/st
fault handlers, so it can be reused by ld/st access fault handlers.
Also Added lb/lbu/sb decoding. (previously unreachable by misaligned fault)

sbi_trap_emulate_load/store is now the common handler which takes a `emu`
parameter that is responsible for emulating the misaligned or access fault.
The `emu` callback is expected to fixup the fault, and based on the return
code of `emu`, sbi_trap_emulate_load/store will:

  r/wlen => the fixup is successful and regs/mepc needs to be updated.
  0      => the fixup is successful, but regs/mepc should be left untouched
            (this is usually used if `emu` does `sbi_trap_redirect`)
  -err   => failed, sbi_trap_error will be called

For now, load/store access faults are blindly redirected. It will be
enhanced in the following patches.

Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-11 10:50:39 +05:30
Bo Gan
9221fe58d1 lib: sbi: change prototype of sbi_misaligned_load/store_handler
This simplifies both handlers such that when the handler needs to
redirect the original trap, it's readily available.

Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-11 10:48:00 +05:30
Bo Gan
a17600c186 lib: sbi: change prototype of sbi_trap_redirect
sbi_trap_redirect now uses const pointer to `trap`.
This ensures the caller that we never change `trap` in sbi_trap_redirect.

Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-11 10:36:39 +05:30
Bo Gan
2471cf2e6c include: sbi: rename sbi_misaligned_ldst.h to sbi_trap_ldst.h
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-11 10:36:35 +05:30
Bo Gan
c0a63205f8 lib: sbi: rename sbi_misaligned_ldst.c to sbi_trap_ldst.c
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-11 10:36:29 +05:30
Qingyu Shang
e11025c52d lib: sbi: Add initial domain context management support
The domain context management component in OpenSBI provides basic CPU
context management routines for existing OpenSBI domain. As domain
extension, it was initially designed to facilitate the suspension
and resumption of domains, enabling secure domains to efficiently
share CPU resources.

The patch also provides an addition to the OpenSBI domain to provide
updates on hart-domain assignment and declarations of contexts within
the domain.

Signed-off-by: Qingyu Shang <2931013282@sjtu.edu.cn>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Tested-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-10 10:26:42 +05:30
Ivan Orlov
87d8fe7865 lib: tests: Add sbi_console test
Add the test suite covering some of the functions from
lib/sbi/sbi_console.c: putc, puts and printf. The test covers a variety
of format specifiers for printf and different strings and characters for
putc and puts.

In order to do that, the test "mocks" the sbi_console_device structure
by setting the 'console_dev' variable to the virtual console.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
2024-03-10 10:12:52 +05:30
Ivan Orlov
e5f53fdea3 lib: tests: Add a test for sbi_bitmap
Add test suite covering all of the functions from lib/sbi/sbi_bitmap.c:
__bitmap_and, __bitmap_or and __bitmap_xor.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
2024-03-10 10:12:39 +05:30
Ivan Orlov
874fcefdf5 lib: Add SBIUnit testing macros and functions
This patch introduces all of the SBIUnit macros and functions which
can be used during the test development process. Also, it defines
the 'run_all_tests' function, which is being called during the
'init_coldboot' right after printing the boot hart information.

Also, add the CONFIG_SBIUNIT Kconfig entry in order to be able to
turn the tests on and off. When the CONFIG_SBIUNIT is disabled,
the tests and all related code is excluded completely on the
compilation stage.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
2024-03-10 10:05:28 +05:30
Ivan Orlov
b9e4de0641 docs: Add documentation about tests and SBIUnit
This patch contains the documentation for SBIUnit. It describes:

- What is SBIUnit
- Simple test writing scenario
- How we can cover static functions
- How we can "mock" structures in order to test the functions which
operate on them
- SBIUnit API Reference

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
2024-03-10 09:58:57 +05:30
Xiang W
526b9ce079 firmware: fw_base.S: fix _reset_regs
a3 and a4 cannot be reset because used in fw_platform_init.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-09 18:16:04 +05:30
Xiang W
8151105af5 firmware: fw_base.S: Remove _relocate_lottery
Remove _relocate_lottery and use _boot_status instead.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-09 18:14:46 +05:30
Xiang W
187397fd65 firmware: fw_dynamic.S: Remove _bad_dynamic_info
_bad_dynamic_info is same as _start_hang, so remove it.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-09 18:08:58 +05:30
Xiang W
b27b7c6d88 firmware: fw_base: Simplified setup trap handler
The same detection was done twice when setting mtvec and trap_exit.
Merging can reduce code size.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-09 18:04:39 +05:30
Xiang W
fdf5589f04 firmware: fw_base.S: Simplify address get
Simplify address get and remove _link_start _link_end _load_start.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-09 17:54:50 +05:30
Nylon Chen
748bef1f9d lib: sbi_misaligned_ldst: Add handling of C.LHU/C.LH and C.SH
Added exception handling for compressed instructions C.LHU, C.LH, and
C.SH from the zcb extension to the sbi_misaligned_ldst library.

Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-05 09:31:52 +05:30
Yu Chien Peter Lin
bc366780c2 platform: andes: Drop andes_pmu_setup()
andes_pmu_setup() [1] was intended to populate event mapping from
hardcoded arrays, however, this increases firmware size and we should
just use PMU DT node [2] instead.

Link: https://lists.infradead.org/pipermail/opensbi/2023-November/006032.html [1]
Link: https://github.com/riscv-software-src/opensbi/blob/v1.4/docs/pmu_support.md#example-3 [2]
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-04 10:20:46 +05:30
Atish Patra
6bb6b61c27 lib: sbi: Add support for smcsrind and smcdeleg
Smcsrind allows generic indirect CSR access mechanism while
Smcdeleg allows delegating hpmcounters in Supervisor mode.

Enable both extensions and set the appropriate bits in mstateen
and menvcfg.

Co-developed-by: Kaiwen Xue <kaiwenxue1@gmail.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-03-04 10:20:41 +05:30
Joshua Yeong
322b598475 lib: sbi_hsm: Restor hart state to stop when fails to start
Hart state should change back to hart stop when hsm_device_hart_start()
or sbi_ipi_raw_send() fails to perform hart start.

Signed-off-by: Joshua Yeong <joshua.yeong@starfivetech.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-24 18:18:34 +05:30
Inochi Amaoto
96a35db63a docs/firmware: document new options for jump and payload firmwares
Adding relocatable address brings new configuration options for jump
and payload firmwares. Describe these new options in documentation.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-24 16:28:42 +05:30
Inochi Amaoto
2cff7f350f platform: Apply relocatable address
Since jump and payload firmware support relocatable address, make
general platform use runtime relocatable address.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-24 16:00:28 +05:30
Inochi Amaoto
f056939d8a firmware: Add relocatable FW_PAYLOAD_FDT_ADDR
The fw_payload.bin has the same issue as described in previous patch.
But only FW_PAYLOAD_FDT_ADDR is affected.

Add FW_PAYLOAD_FDT_OFFSET to identify relocatable payload fdt address.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-24 15:57:59 +05:30
Inochi Amaoto
7227cddcb4 firmware: Add relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR
If FW_PIC=y is defined, the fw_jump.bin will be broken if
FW_TEXT_START is wrong. This is not the desired behavior.

Add two new variables to identify relocatable jump address:
FW_JUMP_OFFSET and FW_JUMP_FDT_ADDR. To keep the existing
ABI, FW_JUMP_ADDR and FW_JUMP_FDT_ADDR is prefered if they
are defined.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-24 15:56:55 +05:30
Nam Cao
741e941cb1 platform: starfive: call starfive_jh7110_inst_init() in pm_reset_init()
The function starfive_jh7110_inst_init() initialize some power
management unit address and clock addresses, needed for the reset
driver. It doesn't do anything else, and also the reset driver doesn't
work without calling this function. Thus, it does not make much sense
that this function is independent from pm_reset_init().

Delete the separate call to starfive_jh7110_inst_init(), and instead
just call this function inside pm_reset_init().

Doing this also fixes another problem: if starfive_jh7110_inst_init()
returns an error code, it gets propagated to final_init() and OpenSBI
hangs. This hang is not necessary, because failures within
starfive_jh7110_inst_init() only mean OpenSBI cannot perform reboot or
shutdown, but the system can still function normally.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-22 18:19:01 +05:30
Nam Cao
3edf0447df platform: starfive: return error if needed devices are not present
Jh7110's reset driver needs power management device and clock controller
device to work. Currently, the driver proceed anyway without these
devices, and invalid addresses (jh7110_inst.pmu_reg_base and
jh7110_inst.clk_reg_base) are used during reboot, which causes
unpredictable broken behaviors.

If these devices are not present, return -SBI_ENODEV.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-22 18:16:48 +05:30
Nam Cao
80ae0464c1 platform: starfive: rename "stf,axp15060-regulator" -> "x-powers,axp15060"
OpenSBI uses the device tree compatible string "stf,axp15060-regulator"
for the regulator node. However, the string used by U-Boot (and Linux)
is actually "x-powers,axp15060". As OpenSBI gets the device tree from
U-Boot, this causes the regulator device to be undetected, and OpenSBI
does not use this device to perform board reset/shutdown.

Rename this device tree compatible string to match U-Boot (and Linux).

Signed-off-by: Nam Cao <namcao@linutronix.de>
Acked-by: Minda Chen <minda.chen@starfivetech.com>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-22 18:12:30 +05:30
Nam Cao
5335340d97 platform: starfive: remove redundant compatibility check in pmic_ops
pmic_ops() is only called if a compatible device is found in device
tree. It is redundant for this function to check the compability again.
Remove this check.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-22 18:07:49 +05:30
Nam Cao
4d8569df7b platform: starfive: get I2C offset address from clocks property
The current code gets the I2C offset address using the device tree node
name: it get the I2C device index from the 4th character in the node
name (for example, "i2c5" -> i2c device 5). However, the device tree
node's name in U-Boot is actually just "i2c" without the number, so the
current code cannot be used with the device tree from U-Boot.

Get the I2C offset address from the "clocks" property instead.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Minda Chen <minda.chen@starfivetech.com>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-22 18:01:51 +05:30
Nam Cao
034af1f85e platform: starfive: correct system clock device tree node
Starfive names the system clock device tree node "starfive,jh7110-clkgen"
in all their git repositories. However, a different name is used in
upstream U-Boot (and also Linux): "starfive,jh7110-syscrg". Since
OpenSBI gets the device tree from U-Boot, this inconsistency leads the
problem that OpenSBI doesn't know the system clock device exists.

Correct this name to keep the consistency.

Signed-off-by: Nam Cao <namcao@linutronix.de>
Acked-by: Minda Chen <minda.chen@starfivetech.com>
Tested-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-22 17:58:17 +05:30
yang.zhang
88273fe19e lib: sbi_pmu: Before using we should ensure PMU init done
If trap earlier before sbi_pmu_init done, some path would call
sbi_pmu_ctr_incr_fw, then it would go wrong:
1. if phs_ptr_offset is zero, then it get a wrong pmu state ptr
2. if phs_ptr_offset is ok, but we didn't call pmu_set_hart_state_ptr
it would be NULL POINT

Of course, the above situation will not occur at present, but it is
reasonable to check before using.

Signed-off-by: yang.zhang <yang.zhang@hexintek.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-20 16:24:06 +05:30
Cheng Yang
46c8c6582d docs: move documentation of system suspend test.
This patch move documentation of "system-suspend-test" from
docs/domain_support.md to docs/opensbi_config.md

Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-20 16:07:38 +05:30
Cheng Yang
8df836d772 platform: generic: Parse system suspend test from config node.
This patch update generic_domains_init() so that "system-suspend-test"
is parsed from "/chosen/opensbi-config" DT node.

Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-20 16:06:31 +05:30
Cheng Yang
23e7e483ee docs: Add OpenSBI DT configuration guide.
This patch add docs/opensbi_config.md which describes the
"/chosen/opensbi-config" DT node and properties

Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-20 16:05:21 +05:30
Cheng Yang
67ce5a763c platform: generic: Add support for specify coldboot harts in DT
Added support for the generic platform to specify the set of coldboot
hart in DT. If not specified in DT, all harts are allowed to coldboot
as before.

The functions related to sbi_hartmask are not available before coldboot,
so I used bitmap, and added a new bitmap_test() function to test whether
a certain bit of the bitmap is set.

Signed-off-by: Cheng Yang <yangcheng.work@foxmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-20 15:49:36 +05:30
Xiang W
9c8b18eb01 firmware: fw_base.S: remove _runtime_offset
_runtime_offset is a variable not used elsewhere, so remove it.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-06 12:33:25 +05:30
Xiang W
4c6b7cb76b firmware: fw_base.S: Improve loading u32
lwu exists under the current rv64 and should also exist under the rv128
in the future, so I modified the conditions of conditional compilation
so that it can adapt to the future situation

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-06 12:29:31 +05:30
Leon M. Busch-George
92e8affb31 firmware: always create dynsym section
With a bare-metal linkers (e.g. riscv64-elf-ld), there exists no
dynsym section. The dynsym section is not used by OpenSBI but
discarding it makes linkers with dynamic library support unhappy.

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-05 16:34:44 +05:30
Leon M. Busch-George
d1dad07cb8 Makefile: check for --exclude-libs
While writing to the dynsym is futile, the --exclude-libs options is not
recognized by all linkers (e.g. riscv64-elf-ld.bfd).

Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-05 16:34:44 +05:30
Kalle Wachsmuth
4a76f79ff5 Makefile: don't pass -mstrict-align if not supported
Support for that option will be added in LLVM 18:
23ce536840

Clang 17.0.6, however, will error when passed the
`-mstrict-align` flag.
We should only use the flag if it is supported.

Signed-off-by: Kalle Wachsmuth <kalle.wachsmuth@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Xiang W <wxjstz@126.com>
2024-02-05 16:00:54 +05:30
Zhang Runmin
21caaa3f56 fw_base.S: Fix comment errors
When calling '_reset_regs', it'll reset all registers except some
specific registers (ra, a0, a1, and a2).

Both boot HART and non-boot HARTs will execute the '_start_warm'
function. Therefore, when '_reset_regs' is called in '_start_warm', it
will reset all registers except some specific registers (ra, a0, a1 and
a2) for both boot HART and non-boot HARTs.

Signed-off-by: Zhang Runmin <fmrt19zrmin@163.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-05 10:30:42 +05:30
Himanshu Chauhan
1ec353d504 lib: sbi: Use mask to check the free bit during trigger allocation
The trigger allocation function uses bit shift instead of mask to check the
mapped status of the triggers. This causes index 0 to be return always. As a
result, the older triggers are overwritten.

Use the mask for MAPPED field in state word to check if the trigger is mapped.

Fixes: 97f234f15 ("lib: sbi: Introduce the SBI debug triggers extension support")
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-02-05 10:23:01 +05:30
Himanshu Chauhan
bb90a9ebf6 lib: sbi: Print number of debug triggers found
Print the total number of triggers found on the boot hart.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-01-10 10:55:52 +05:30
Himanshu Chauhan
76a2a15c40 lib: sbi: Implement SBI debug trigger extension
This patch adds functions to register ecalls for debug triggers
and handler to handle the debug trigger function IDs.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-01-10 10:55:50 +05:30
Himanshu Chauhan
fa87ec90a0 include: sbi: Add SBI debug trigger extension related defines
This patch adds defines for SBI debug trigger extension and
function IDs to access the extension.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-01-10 10:55:49 +05:30
Himanshu Chauhan
97f234f15c lib: sbi: Introduce the SBI debug triggers extension support
RISC-V Debug specification includes Sdtrig ISA extension
which describes Trigger Module. Triggers can cause
a breakpoint exception or trace action without execution
of a special instruction. They can be used to implement
hardware breakpoints and watchpoints for native debugging.

The SBI Debut Trigger extension (Draft v6) can be found at:
https://lists.riscv.org/g/tech-debug/topic/99825362#1302

This patch is an initial implementation of SBI Debug
Trigger Extension (Draft v6) in OpenSBI.

The following features are supported:
 * mcontrol, mcontrol6 triggers
 * Breakpoint and trace actions

NOTE: Chained triggers are not supported

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-01-10 10:55:42 +05:30
Himanshu Chauhan
40dac6bcfe lib: sbi: Detect support of debug triggers
Detect if debug triggers, sdtrig extension, is supported
by the CPU. The support is detected by access traps and
ISA string parsing.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-01-10 09:43:37 +05:30
Himanshu Chauhan
24997697ae include: sbi: Introduce debug trigger register encodings
This patch introduces Mcontrol and M6 control register
encodings along with macros to manipulate them.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-01-10 09:43:34 +05:30
Himanshu Chauhan
20ca19ab03 include: sbi: Add TINFO debug trigger CSR
Add the missing TINFO debug trigger CSR.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-01-10 09:43:33 +05:30
Himanshu Chauhan
b752099da8 include: sbi: Introduce common endianess conversion macro
Introduce cpu_to_lle and lle_to_cpu macros which invoke
correct word length cpu_to_le<64/32> conversion based on
__riscv_xlen.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-01-10 09:43:28 +05:30
277 changed files with 14329 additions and 3314 deletions

21
.editorconfig Normal file
View File

@@ -0,0 +1,21 @@
# SPDX-License-Identifier: GPL-2.0-only
# See here for more information about the format and editor support:
# https://editorconfig.org/
root = true
[{*.{c,dts,h,lds,ldS,mk,s,S},Kconfig,Makefile,Makefile.*}]
charset = utf-8
end_of_line = lf
trim_trailing_whitespace = true
insert_final_newline = true
indent_style = tab
indent_size = 8
[*.py]
charset = utf-8
end_of_line = lf
trim_trailing_whitespace = true
insert_final_newline = true
indent_style = space
indent_size = 4

26
.github/workflows/repo-lockdown.yml vendored Normal file
View File

@@ -0,0 +1,26 @@
name: 'Repo Lockdown'
on:
pull_request_target:
types: opened
permissions:
pull-requests: write
jobs:
action:
runs-on: ubuntu-latest
steps:
- uses: dessant/repo-lockdown@v4
with:
pr-comment: |
We have mailing list based patch review so it would be great if you can send these patchs to OpenSBI mailing list.
You need to join OpenSBI mailing list using following link
http://lists.infradead.org/mailman/listinfo/opensbi
Make sure you use "git send-email" to send the patches.
Thanks for your contribution to OpenSBI project.
lock-pr: true
close-pr: true

3
.gitignore vendored
View File

@@ -4,6 +4,8 @@
# exceptions we need even begin with dot
!.clang-format
!.gitignore
!.github
!.editorconfig
# Object files
*.o
@@ -17,3 +19,4 @@ install/
# Development friendly files
tags
cscope*
*~

124
Makefile
View File

@@ -79,6 +79,7 @@ export PYTHONDONTWRITEBYTECODE=1
export KCONFIG_DIR=$(platform_build_dir)/kconfig
export KCONFIG_AUTOLIST=$(KCONFIG_DIR)/auto.list
export KCONFIG_AUTOHEADER=$(KCONFIG_DIR)/autoconf.h
export KCONFIG_AUTOCONFIG=$(KCONFIG_DIR)/auto.conf
export KCONFIG_AUTOCMD=$(KCONFIG_DIR)/auto.conf.cmd
export KCONFIG_CONFIG=$(KCONFIG_DIR)/.config
# Additional exports for include paths in Kconfig files
@@ -90,7 +91,16 @@ endif
# Find library version
OPENSBI_VERSION_MAJOR=`grep "define OPENSBI_VERSION_MAJOR" $(include_dir)/sbi/sbi_version.h | sed 's/.*MAJOR.*\([0-9][0-9]*\)/\1/'`
OPENSBI_VERSION_MINOR=`grep "define OPENSBI_VERSION_MINOR" $(include_dir)/sbi/sbi_version.h | sed 's/.*MINOR.*\([0-9][0-9]*\)/\1/'`
OPENSBI_VERSION_GIT=$(shell if [ -d $(src_dir)/.git ]; then git describe 2> /dev/null; fi)
OPENSBI_VERSION_GIT=
# Detect 'git' presence before issuing 'git' commands
GIT_AVAIL=$(shell command -v git 2> /dev/null)
ifneq ($(GIT_AVAIL),)
GIT_DIR=$(shell git rev-parse --git-dir 2> /dev/null)
ifneq ($(GIT_DIR),)
OPENSBI_VERSION_GIT=$(shell if [ -d $(GIT_DIR) ]; then git describe 2> /dev/null; fi)
endif
endif
# Setup compilation commands
ifneq ($(LLVM),)
@@ -167,11 +177,24 @@ endif
# Check whether the linker supports creating PIEs
OPENSBI_LD_PIE := $(shell $(CC) $(CLANG_TARGET) $(RELAX_FLAG) $(USE_LD_FLAG) -fPIE -nostdlib -Wl,-pie -x c /dev/null -o /dev/null >/dev/null 2>&1 && echo y || echo n)
# Check whether the linker supports --exclude-libs
OPENSBI_LD_EXCLUDE_LIBS := $(shell $(CC) $(CLANG_TARGET) $(RELAX_FLAG) $(USE_LD_FLAG) "-Wl,--exclude-libs,ALL" -x c /dev/null -o /dev/null >/dev/null 2>&1 && echo y || echo n)
# Check whether the compiler supports -m(no-)save-restore
CC_SUPPORT_SAVE_RESTORE := $(shell $(CC) $(CLANG_TARGET) $(RELAX_FLAG) -nostdlib -mno-save-restore -x c /dev/null -o /dev/null 2>&1 | grep -e "-save-restore" >/dev/null && echo n || echo y)
# Check whether the compiler supports -m(no-)strict-align
CC_SUPPORT_STRICT_ALIGN := $(shell $(CC) $(CLANG_TARGET) $(RELAX_FLAG) -nostdlib -mstrict-align -x c /dev/null -o /dev/null 2>&1 | grep -e "-mstrict-align" -e "-mno-unaligned-access" >/dev/null && echo n || echo y)
# Check whether the assembler and the compiler support the Zicsr and Zifencei extensions
CC_SUPPORT_ZICSR_ZIFENCEI := $(shell $(CC) $(CLANG_TARGET) $(RELAX_FLAG) -nostdlib -march=rv$(OPENSBI_CC_XLEN)imafd_zicsr_zifencei -x c /dev/null -o /dev/null 2>&1 | grep "zicsr\|zifencei" > /dev/null && echo n || echo y)
CC_SUPPORT_ZICSR_ZIFENCEI := $(shell $(CC) $(CLANG_TARGET) $(RELAX_FLAG) -nostdlib -march=rv$(OPENSBI_CC_XLEN)imafd_zicsr_zifencei -x c /dev/null -o /dev/null 2>&1 | grep -e "zicsr" -e "zifencei" > /dev/null && echo n || echo y)
# Check whether the assembler and the compiler support the Vector extension
CC_SUPPORT_VECTOR := $(shell $(CC) $(CLANG_TARGET) $(RELAX_FLAG) -nostdlib -march=rv$(OPENSBI_CC_XLEN)gv -dM -E -x c /dev/null 2>&1 | grep -q riscv.*vector && echo y || echo n)
ifneq ($(OPENSBI_LD_PIE),y)
$(error Your linker does not support creating PIEs, opensbi requires this.)
endif
# Build Info:
# OPENSBI_BUILD_TIME_STAMP -- the compilation time stamp
@@ -210,24 +233,28 @@ ifdef PLATFORM
menuconfig: $(platform_src_dir)/Kconfig $(src_dir)/Kconfig
$(CMD_PREFIX)mkdir -p $(KCONFIG_DIR)
$(CMD_PREFIX)$(src_dir)/scripts/Kconfiglib/menuconfig.py $(src_dir)/Kconfig
$(CMD_PREFIX)$(src_dir)/scripts/Kconfiglib/genconfig.py --header-path $(KCONFIG_AUTOHEADER) --sync-deps $(KCONFIG_DIR) --file-list $(KCONFIG_AUTOLIST) $(src_dir)/Kconfig
.PHONY: savedefconfig
savedefconfig: $(platform_src_dir)/Kconfig $(src_dir)/Kconfig
$(CMD_PREFIX)mkdir -p $(KCONFIG_DIR)
$(CMD_PREFIX)$(src_dir)/scripts/Kconfiglib/savedefconfig.py --kconfig $(src_dir)/Kconfig --out $(KCONFIG_DIR)/defconfig
$(KCONFIG_CONFIG): $(platform_src_dir)/configs/$(PLATFORM_DEFCONFIG) $(platform_src_dir)/Kconfig $(src_dir)/Kconfig
$(KCONFIG_CONFIG): $(platform_src_dir)/configs/$(PLATFORM_DEFCONFIG)
$(CMD_PREFIX)mkdir -p $(KCONFIG_DIR)
$(CMD_PREFIX)$(src_dir)/scripts/Kconfiglib/defconfig.py --kconfig $(src_dir)/Kconfig $(platform_src_dir)/configs/$(PLATFORM_DEFCONFIG)
$(KCONFIG_AUTOCONFIG): $(KCONFIG_CONFIG)
$(CMD_PREFIX)$(src_dir)/scripts/Kconfiglib/genconfig.py --header-path $(KCONFIG_AUTOHEADER) --sync-deps $(KCONFIG_DIR) --file-list $(KCONFIG_AUTOLIST) $(src_dir)/Kconfig
$(KCONFIG_AUTOCMD): $(KCONFIG_CONFIG)
$(CMD_PREFIX)mkdir -p $(KCONFIG_DIR)
$(KCONFIG_AUTOHEADER): $(KCONFIG_AUTOCONFIG);
$(KCONFIG_AUTOLIST): $(KCONFIG_AUTOCONFIG);
$(KCONFIG_AUTOCMD): $(KCONFIG_AUTOLIST)
$(CMD_PREFIX)printf "%s: " $(KCONFIG_CONFIG) > $(KCONFIG_AUTOCMD)
$(CMD_PREFIX)cat $(KCONFIG_AUTOLIST) | tr '\n' ' ' >> $(KCONFIG_AUTOCMD)
include $(KCONFIG_CONFIG)
include $(KCONFIG_AUTOCONFIG)
include $(KCONFIG_AUTOCMD)
endif
@@ -270,10 +297,9 @@ ifndef PLATFORM_RISCV_ABI
endif
ifndef PLATFORM_RISCV_ISA
ifneq ($(PLATFORM_RISCV_TOOLCHAIN_DEFAULT), 1)
PLATFORM_RISCV_ISA := rv$(PLATFORM_RISCV_XLEN)imafdc
ifeq ($(CC_SUPPORT_ZICSR_ZIFENCEI), y)
PLATFORM_RISCV_ISA = rv$(PLATFORM_RISCV_XLEN)imafdc_zicsr_zifencei
else
PLATFORM_RISCV_ISA = rv$(PLATFORM_RISCV_XLEN)imafdc
PLATFORM_RISCV_ISA := $(PLATFORM_RISCV_ISA)_zicsr_zifencei
endif
else
PLATFORM_RISCV_ISA = $(OPENSBI_CC_ISA)
@@ -331,23 +357,24 @@ GENFLAGS += $(libsbiutils-genflags-y)
GENFLAGS += $(platform-genflags-y)
GENFLAGS += $(firmware-genflags-y)
CFLAGS = -g -Wall -Werror -ffreestanding -nostdlib -fno-stack-protector -fno-strict-aliasing
ifneq ($(DEBUG),)
CFLAGS += -O0
else
CFLAGS += -O2
CFLAGS = -g -Wall -Werror -ffreestanding -nostdlib -fno-stack-protector -fno-strict-aliasing -ffunction-sections -fdata-sections
CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
# Optionally supported flags
ifeq ($(CC_SUPPORT_VECTOR),y)
CFLAGS += -DOPENSBI_CC_SUPPORT_VECTOR
endif
CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls -mstrict-align
# enable -m(no-)save-restore option by CC_SUPPORT_SAVE_RESTORE
ifeq ($(CC_SUPPORT_SAVE_RESTORE),y)
CFLAGS += -mno-save-restore
endif
ifeq ($(CC_SUPPORT_STRICT_ALIGN),y)
CFLAGS += -mstrict-align
endif
CFLAGS += -mabi=$(PLATFORM_RISCV_ABI) -march=$(PLATFORM_RISCV_ISA)
CFLAGS += -mcmodel=$(PLATFORM_RISCV_CODE_MODEL)
CFLAGS += $(RELAX_FLAG)
CFLAGS += $(GENFLAGS)
CFLAGS += $(platform-cflags-y)
CFLAGS += -fno-pie -no-pie
CFLAGS += -fPIE -pie
CFLAGS += $(firmware-cflags-y)
CPPFLAGS += $(GENFLAGS)
@@ -355,11 +382,15 @@ CPPFLAGS += $(platform-cppflags-y)
CPPFLAGS += $(firmware-cppflags-y)
ASFLAGS = -g -Wall -nostdlib
ASFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls -mstrict-align
# enable -m(no-)save-restore option by CC_SUPPORT_SAVE_RESTORE
ASFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
ASFLAGS += -fPIE
# Optionally supported flags
ifeq ($(CC_SUPPORT_SAVE_RESTORE),y)
ASFLAGS += -mno-save-restore
endif
ifeq ($(CC_SUPPORT_STRICT_ALIGN),y)
ASFLAGS += -mstrict-align
endif
ASFLAGS += -mabi=$(PLATFORM_RISCV_ABI) -march=$(PLATFORM_RISCV_ISA)
ASFLAGS += -mcmodel=$(PLATFORM_RISCV_CODE_MODEL)
ASFLAGS += $(RELAX_FLAG)
@@ -375,8 +406,12 @@ ASFLAGS += $(firmware-asflags-y)
ARFLAGS = rcs
ELFFLAGS += $(USE_LD_FLAG)
ELFFLAGS += -Wl,--gc-sections
ifeq ($(OPENSBI_LD_EXCLUDE_LIBS),y)
ELFFLAGS += -Wl,--exclude-libs,ALL
endif
ELFFLAGS += -Wl,--build-id=none
ELFFLAGS += -Wl,--no-dynamic-linker -Wl,-pie
ELFFLAGS += $(platform-ldflags-y)
ELFFLAGS += $(firmware-ldflags-y)
@@ -390,6 +425,13 @@ MERGEFLAGS += -m elf$(PLATFORM_RISCV_XLEN)lriscv
DTSCPPFLAGS = $(CPPFLAGS) -nostdinc -nostdlib -fno-builtin -D__DTS__ -x assembler-with-cpp
ifneq ($(DEBUG),)
CFLAGS += -O0
ELFFLAGS += -Wl,--print-gc-sections
else
CFLAGS += -O2
endif
# Setup functions for compilation
define dynamic_flags
-I$(shell dirname $(2)) -D__OBJNAME__=$(subst -,_,$(shell basename $(1) .o))
@@ -464,8 +506,8 @@ compile_d2c = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
$(src_dir)/scripts/d2c.sh -i $(6) -a $(D2C_ALIGN_BYTES) -p $(D2C_NAME_PREFIX) -t $(D2C_PADDING_BYTES) > $(1)
compile_carray = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
echo " CARRAY $(subst $(build_dir)/,,$(1))"; \
$(eval CARRAY_VAR_LIST := $(carray-$(subst .c,,$(shell basename $(1)))-y)) \
$(src_dir)/scripts/carray.sh -i $(2) -l "$(CARRAY_VAR_LIST)" > $(1)
$(eval CARRAY_VAR_LIST := $(carray-$(subst .carray.c,,$(shell basename $(1)))-y)) \
$(src_dir)/scripts/carray.sh -i $(2) -l "$(CARRAY_VAR_LIST)" > $(1) || rm $(1)
compile_gen_dep = $(CMD_PREFIX)mkdir -p `dirname $(1)`; \
echo " GEN-DEP $(subst $(build_dir)/,,$(1))"; \
echo "$(1:.dep=$(2)): $(3)" >> $(1)
@@ -490,14 +532,14 @@ $(build_dir)/lib/libsbi.a: $(libsbi-objs-path-y)
$(platform_build_dir)/lib/libplatsbi.a: $(libsbi-objs-path-y) $(libsbiutils-objs-path-y) $(platform-objs-path-y)
$(call compile_ar,$@,$^)
$(build_dir)/%.dep: $(src_dir)/%.carray $(KCONFIG_CONFIG)
$(call compile_gen_dep,$@,.c,$< $(KCONFIG_CONFIG))
$(build_dir)/%.dep: $(src_dir)/%.carray $(KCONFIG_AUTOHEADER)
$(call compile_gen_dep,$@,.c,$< $(KCONFIG_AUTOHEADER))
$(call compile_gen_dep,$@,.o,$(@:.dep=.c))
$(build_dir)/%.c: $(src_dir)/%.carray
$(build_dir)/%.carray.c: $(src_dir)/%.carray $(src_dir)/scripts/carray.sh
$(call compile_carray,$@,$<)
$(build_dir)/%.dep: $(src_dir)/%.c $(KCONFIG_CONFIG)
$(build_dir)/%.dep: $(src_dir)/%.c $(KCONFIG_AUTOHEADER)
$(call compile_cc_dep,$@,$<)
$(build_dir)/%.o: $(src_dir)/%.c
@@ -511,24 +553,24 @@ $(build_dir)/lib/sbi/sbi_init.o: $(libsbi_dir)/sbi_init.c FORCE
$(call compile_cc,$@,$<)
endif
$(build_dir)/%.dep: $(src_dir)/%.S $(KCONFIG_CONFIG)
$(build_dir)/%.dep: $(src_dir)/%.S $(KCONFIG_AUTOHEADER)
$(call compile_as_dep,$@,$<)
$(build_dir)/%.o: $(src_dir)/%.S
$(call compile_as,$@,$<)
# Rules for platform sources
$(platform_build_dir)/%.dep: $(platform_src_dir)/%.carray $(KCONFIG_CONFIG)
$(call compile_gen_dep,$@,.c,$< $(KCONFIG_CONFIG))
$(platform_build_dir)/%.dep: $(platform_src_dir)/%.carray $(KCONFIG_AUTOHEADER)
$(call compile_gen_dep,$@,.c,$< $(KCONFIG_AUTOHEADER))
$(call compile_gen_dep,$@,.o,$(@:.dep=.c))
$(platform_build_dir)/%.c: $(platform_src_dir)/%.carray
$(platform_build_dir)/%.carray.c: $(platform_src_dir)/%.carray $(src_dir)/scripts/carray.sh
$(call compile_carray,$@,$<)
$(platform_build_dir)/%.dep: $(platform_src_dir)/%.c $(KCONFIG_CONFIG)
$(platform_build_dir)/%.dep: $(platform_src_dir)/%.c $(KCONFIG_AUTOHEADER)
$(call compile_cc_dep,$@,$<)
$(platform_build_dir)/%.o: $(platform_src_dir)/%.c $(KCONFIG_CONFIG)
$(platform_build_dir)/%.o: $(platform_src_dir)/%.c $(KCONFIG_AUTOHEADER)
$(call compile_cc,$@,$<)
$(platform_build_dir)/%.dep: $(platform_src_dir)/%.S
@@ -537,8 +579,8 @@ $(platform_build_dir)/%.dep: $(platform_src_dir)/%.S
$(platform_build_dir)/%.o: $(platform_src_dir)/%.S
$(call compile_as,$@,$<)
$(platform_build_dir)/%.dep: $(platform_src_dir)/%.dts $(KCONFIG_CONFIG)
$(call compile_gen_dep,$@,.dtb,$< $(KCONFIG_CONFIG))
$(platform_build_dir)/%.dep: $(platform_src_dir)/%.dts $(KCONFIG_AUTOHEADER)
$(call compile_gen_dep,$@,.dtb,$< $(KCONFIG_AUTOHEADER))
$(call compile_gen_dep,$@,.c,$(@:.dep=.dtb))
$(call compile_gen_dep,$@,.o,$(@:.dep=.c))
@@ -555,26 +597,26 @@ $(platform_build_dir)/%.bin: $(platform_build_dir)/%.elf
$(platform_build_dir)/%.elf: $(platform_build_dir)/%.o $(platform_build_dir)/%.elf.ld $(platform_build_dir)/lib/libplatsbi.a
$(call compile_elf,$@,$@.ld,$< $(platform_build_dir)/lib/libplatsbi.a)
$(platform_build_dir)/%.dep: $(src_dir)/%.ldS $(KCONFIG_CONFIG)
$(platform_build_dir)/%.dep: $(src_dir)/%.ldS $(KCONFIG_AUTOHEADER)
$(call compile_cpp_dep,$@,.ld,$<)
$(platform_build_dir)/%.ld: $(src_dir)/%.ldS
$(call compile_cpp,$@,$<)
$(platform_build_dir)/%.dep: $(src_dir)/%.carray $(KCONFIG_CONFIG)
$(call compile_gen_dep,$@,.c,$< $(KCONFIG_CONFIG))
$(platform_build_dir)/%.dep: $(src_dir)/%.carray $(KCONFIG_AUTOHEADER)
$(call compile_gen_dep,$@,.c,$< $(KCONFIG_AUTOHEADER))
$(call compile_gen_dep,$@,.o,$(@:.dep=.c))
$(platform_build_dir)/%.c: $(src_dir)/%.carray
$(platform_build_dir)/%.carray.c: $(src_dir)/%.carray $(src_dir)/scripts/carray.sh
$(call compile_carray,$@,$<)
$(platform_build_dir)/%.dep: $(src_dir)/%.c $(KCONFIG_CONFIG)
$(platform_build_dir)/%.dep: $(src_dir)/%.c $(KCONFIG_AUTOHEADER)
$(call compile_cc_dep,$@,$<)
$(platform_build_dir)/%.o: $(src_dir)/%.c
$(call compile_cc,$@,$<)
$(platform_build_dir)/%.dep: $(src_dir)/%.S $(KCONFIG_CONFIG)
$(platform_build_dir)/%.dep: $(src_dir)/%.S $(KCONFIG_AUTOHEADER)
$(call compile_as_dep,$@,$<)
$(platform_build_dir)/%.o: $(src_dir)/%.S
@@ -662,6 +704,8 @@ clean:
$(CMD_PREFIX)mkdir -p $(build_dir)
$(if $(V), @echo " RM $(build_dir)/*.o")
$(CMD_PREFIX)find $(build_dir) -type f -name "*.o" -exec rm -rf {} +
$(if $(V), @echo " RM $(build_dir)/*.carray.c")
$(CMD_PREFIX)find $(build_dir) -type f -name "*.carray.c" -exec rm -rf {} +
$(if $(V), @echo " RM $(build_dir)/*.a")
$(CMD_PREFIX)find $(build_dir) -type f -name "*.a" -exec rm -rf {} +
$(if $(V), @echo " RM $(build_dir)/*.elf")

View File

@@ -276,8 +276,7 @@ document.
NOTE: Using Clang with a `riscv*-linux-gnu` GNU binutils linker has been seen
to produce broken binaries with missing relocations; it is therefore currently
recommended that this combination be avoided or *FW_PIC=n* be used to disable
building OpenSBI as a position-independent binary.
recommended that this combination be avoided.
Building with timestamp and compiler info
-----------------------------------------

View File

@@ -1,17 +1,15 @@
OpenSBI Contribution Guideline
==============================
All contributions to OpenSBI can be sent in the following ways:
1. Email patches to the OpenSBI mailing list at `opensbi@lists.infradead.org`
2. GitHub Pull Requests (PRs) to the [OpenSBI main repository]
All contributions to OpenSBI must be sent via email patches to the OpenSBI
mailing list at `opensbi@lists.infradead.org`
To join the OpenSBI mailing list, please visit the [OpenSBI infradead page].
The OpenSBI maintainers prefer patches via the OpenSBI mailing list
(option 1 above) so that they are visible to a wider audience. All
accepted patches on the OpenSBI mailing list will be taken by any of
the OpenSBI maintainers and merged into the [OpenSBI main repository]
using GitHub PRs.
The mailing list based patch approach is preferred over github PRs so that they
are visible to a wider audience. All accepted patches on the OpenSBI mailing
list will be taken by one of the OpenSBI maintainers and merged into the
[OpenSBI main repository].
All contributed work must follow the following rules:
1. OpenSBI code should be written in accordance to the [Linux coding style].
@@ -33,9 +31,6 @@ riscv/opensbi repository. Instead, prefer using a fork of the riscv/opensbi main
repository and branches within that fork to create pull requests.
7. A maintainer cannot merge his own pull requests in the riscv/opensbi main
repository.
8. A pull request must get at least one review from a maintainer.
9. A pull request must spend at least 24 hours in review to allow for other
developers to review.
-----------------------------------------------------------------------

View File

@@ -126,9 +126,6 @@ The DT properties of a domain configuration DT node are as follows:
* **compatible** (Mandatory) - The compatible string of the domain
configuration. This DT property should have value *"opensbi,domain,config"*
* **system-suspend-test** (Optional) - When present, enable a system
suspend test implementation which simply waits five seconds and issues a WFI.
### Domain Memory Region Node
The domain memory region DT node describes details of a memory region and
@@ -181,9 +178,7 @@ The DT properties of a domain instance DT node are as follows:
boot HART of the domain instance.
* **next-arg1** (Optional) - The 64 bit next booting stage arg1 for the
domain instance. If this DT property is not available and coldboot HART
is not assigned to the domain instance then **0x0** is used as default
value. If this DT property is not available and coldboot HART is assigned
to the domain instance then **next booting stage arg1 of coldboot HART**
is not assigned to the domain instance then **next booting stage arg1 of coldboot HART**
is used as default value.
* **next-addr** (Optional) - The 64 bit next booting stage address for the
domain instance. If this DT property is not available and coldboot HART
@@ -237,7 +232,6 @@ be done:
chosen {
opensbi-domains {
compatible = "opensbi,domain,config";
system-suspend-test;
tmem: tmem {
compatible = "opensbi,domain,memregion";

View File

@@ -796,6 +796,8 @@ INPUT = @@SRC_DIR@@/README.md \
@@SRC_DIR@@/docs/platform_requirements.md \
@@SRC_DIR@@/docs/library_usage.md \
@@SRC_DIR@@/docs/domain_support.md \
@@SRC_DIR@@/docs/opensbi_config.md \
@@SRC_DIR@@/docs/writing_tests.md \
@@SRC_DIR@@/docs/firmware \
@@SRC_DIR@@/docs/platform \
@@SRC_DIR@@/include \

View File

@@ -61,20 +61,15 @@ Firmware Configuration and Compilation
All firmware types support the following common compile time configuration
parameters:
* **FW_TEXT_START** - Defines the execution address of the OpenSBI firmware.
This configuration parameter is mandatory.
* **FW_TEXT_START** - Defines the compile time address of the OpenSBI
firmware. This configuration parameter is optional and assumed to be
`0` if not specified.
* **FW_FDT_PATH** - Path to an external flattened device tree binary file to
be embedded in the *.rodata* section of the final firmware. If this option
is not provided then the firmware will expect the FDT to be passed as an
argument by the prior booting stage.
* **FW_FDT_PADDING** - Optional zero bytes padding to the embedded flattened
device tree binary file specified by **FW_FDT_PATH** option.
* **FW_PIC** - "FW_PIC=y" generates position independent executable firmware
images. OpenSBI can run at arbitrary address with appropriate alignment.
Therefore, the original relocation mechanism ("FW_PIC=n") will be skipped.
In other words, OpenSBI will directly run at the load address without any
code movement. This option requires a toolchain with PIE support, and it
is on by default.
Additionally, each firmware type as a set of type specific configuration
parameters. Detailed information for each firmware type can be found in the

View File

@@ -31,9 +31,14 @@ follows:
* **FW_JUMP_ADDR** - Address of the entry point of the booting stage to be
executed following OpenSBI firmware. This address generally corresponds
exactly to the address where this next booting stage was loaded. This is a
mandatory parameter. Compilation errors will result from not defining this
address.
exactly to the address where this next booting stage was loaded.
At least one of *FW_JUMP_ADDR* and *FW_JUMP_OFFSET* (see below) should be
defined. Compilation errors will result from not defining one of them.
* **FW_JUMP_OFFSET** - Address offset from the opensbi load address where the
entry point of the next booting stage is located. This offset is used as
relocatable address of the next booting stage entry point. If *FW_JUMP_ADDR*
is also defined, the firmware will prefer *FW_JUMP_ADDR*.
* **FW_JUMP_FDT_ADDR** - Address where the *flattened device tree (FDT file)*
passed by the prior booting stage will be placed in memory before executing
@@ -57,6 +62,12 @@ follows:
echo fdt overlaps kernel, increase FW_JUMP_FDT_ADDR
```
* **FW_JUMP_FDT_OFFSET** - Address offset from the opensbi load address where
the FDT will be passed to the next booting stage. This offset is used
as relocatable address of the FDT passed to the next booting stage. If
*FW_JUMP_FDT_ADDR* is also defined, the firmware will prefer
*FW_JUMP_FDT_ADDR*.
*FW_JUMP* Example
-----------------

View File

@@ -23,7 +23,7 @@ The *FW_PAYLOAD* firmware can be enabled by any of the following methods:
2. Specifying `FW_PAYLOAD=y` in the target platform *objects.mk* configuration
file.
The compiled *FW_PAYLOAD* firmware ELF file is named *fw_jump.elf*. Its
The compiled *FW_PAYLOAD* firmware ELF file is named *fw_payload.elf*. Its
expanded image file is *fw_payload.bin*. Both files are created in the
platform-specific build directory under the
*build/platform/<platform_subdir>/firmware* directory.
@@ -36,8 +36,8 @@ options. These configuration parameters can be defined using either the top
level `make` command line or the target platform *objects.mk* configuration
file. The parameters currently defined are as follows:
* **FW_PAYLOAD_OFFSET** - Offset from *FW_TEXT_START* where the payload binary
will be linked in the final *FW_PAYLOAD* firmware binary image. This
* **FW_PAYLOAD_OFFSET** - Offset from the opensbi load address where the payload
binary will be linked in the final *FW_PAYLOAD* firmware binary image. This
configuration parameter is mandatory if *FW_PAYLOAD_ALIGN* is not defined.
Compilation errors will result from an incorrect definition of
*FW_PAYLOAD_OFFSET* or of *FW_PAYLOAD_ALIGN*, or if neither of these
@@ -62,6 +62,11 @@ file. The parameters currently defined are as follows:
firmware will pass the FDT address passed by the previous booting stage
to the next booting stage.
* **FW_PAYLOAD_FDT_OFFSET** - Address offset from the opensbi load address where
the FDT will be passed to the next booting stage. This offset is used as
relocatable address of the FDT passed to the next booting stage. If
*FW_PAYLOAD_FDT_ADDR* is also defined, the firmware will prefer *FW_PAYLOAD_FDT_ADDR*.
*FW_PAYLOAD* Example
--------------------

91
docs/opensbi_config.md Normal file
View File

@@ -0,0 +1,91 @@
OpenSBI Device Tree Configuration Guideline
==================================
Some configurations of OpenSBI's Generic Platform can be described
in the **device tree (DT) blob** (or flattened device tree) passed
to the OpenSBI firmwares by the previous booting stage. OpenSBI will
parse and use these configurations during the boot phase, but delete
them from the device tree at the end of cold boot.
### OpenSBI Configuration Node
All nodes related to OpenSBI configuration should be under the OpenSBI
configuration DT node. The **/chosen** DT node is the preferred parent
of the OpenSBI configuration DT node.
The DT properties of a domain configuration DT node are as follows:
* **compatible** (Mandatory) - The compatible string of the OpenSBI
configuration. This DT property should have value *"opensbi,config"*
* **cold-boot-harts** (Optional) - If a platform lacks an override
cold_boot_allowed() mechanism, this DT property specifies that a
set of harts is permitted to perform a cold boot. Otherwise, all
harts are allowed to cold boot.
* **heap-size** (Optional) - When present, the specified value is used
as the size of the heap in bytes.
* **system-suspend-test** (Optional) - When present, enable a system
suspend test implementation which simply waits five seconds and issues a WFI.
The OpenSBI Configuration Node will be deleted at the end of cold boot
(replace the node (subtree) with nop tags).
### Example
```text
chosen {
opensbi-config {
compatible = "opensbi,config";
cold-boot-harts = <&cpu1 &cpu2 &cpu3 &cpu4>;
heap-size = <0x400000>;
system-suspend-test;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
timebase-frequency = <10000000>;
cpu0: cpu@0 {
device_type = "cpu";
reg = <0x00>;
compatible = "riscv";
...
};
cpu1: cpu@1 {
device_type = "cpu";
reg = <0x01>;
compatible = "riscv";
...
};
cpu2: cpu@2 {
device_type = "cpu";
reg = <0x02>;
compatible = "riscv";
...
};
cpu3: cpu@3 {
device_type = "cpu";
reg = <0x03>;
compatible = "riscv";
...
};
cpu4: cpu@4 {
device_type = "cpu";
reg = <0x04>;
compatible = "riscv";
...
};
};
uart1: serial@10011000 {
...
};
```

View File

@@ -9,10 +9,9 @@ boards.
By default, the generic FDT platform makes following assumptions:
1. platform FW_TEXT_START is 0x80000000
2. platform features are default
3. platform stack size is default
4. platform has no quirks or work-arounds
1. platform features are default
2. platform stack size is default
3. platform has no quirks or work-arounds
The above assumptions (except 1) can be overridden by adding special platform
callbacks which will be called based on FDT root node compatible string.
@@ -33,10 +32,6 @@ Users of the generic FDT platform will have to ensure that:
To build the platform-specific library and firmware images, provide the
*PLATFORM=generic* parameter to the top level `make` command.
For custom FW_TEXT_START, we can build the platform-specific library and
firmware images by passing *PLATFORM=generic FW_TEXT_START=<custom_text_start>*
parameter to the top level `make` command.
Platform Options
----------------

View File

@@ -56,7 +56,14 @@ qemu-system-riscv64 -M virt -m 256M -nographic \
**Linux Kernel Payload**
Note: We assume that the Linux kernel is compiled using
*arch/riscv/configs/defconfig*.
*arch/riscv/configs/defconfig*. The kernel must be a flattened image (a file
called `Image`) rather than an ELF (`vmlinux`).
Example of building a Linux kernel:
```
make ARCH=riscv CROSS_COMPILE=riscv64-linux- defconfig
make ARCH=riscv CROSS_COMPILE=riscv64-linux- Image
```
Build:
```

127
docs/writing_tests.md Normal file
View File

@@ -0,0 +1,127 @@
Writing tests for OpenSBI
=========================
SBIUnit
-------
SBIUnit is a set of macros and functions which simplify the test development and
automate the test execution and evaluation. All of the SBIUnit definitions are
in the `include/sbi/sbi_unit_test.h` header file, and implementations are
available in `lib/sbi/tests/sbi_unit_test.c`.
Simple SBIUnit test
-------------------
For instance, we would like to test the following function from
`lib/sbi/sbi_string.c`:
```c
size_t sbi_strlen(const char *str)
{
unsigned long ret = 0;
while (*str != '\0') {
ret++;
str++;
}
return ret;
}
```
which calculates the string length.
Create the file `lib/sbi/tests/sbi_string_test.c` with the following content:
```c
#include <sbi/sbi_unit_test.h>
#include <sbi/sbi_string.h>
static void strlen_test(struct sbiunit_test_case *test)
{
SBIUNIT_EXPECT_EQ(test, sbi_strlen("Hello"), 5);
SBIUNIT_EXPECT_EQ(test, sbi_strlen("Hell\0o"), 4);
}
static struct sbiunit_test_case string_test_cases[] = {
SBIUNIT_TEST_CASE(strlen_test),
SBIUNIT_END_CASE,
};
SBIUNIT_TEST_SUITE(string_test_suite, string_test_cases);
```
Then, add the corresponding Makefile entries to `lib/sbi/tests/objects.mk`:
```lang-makefile
...
carray-sbi_unit_tests-$(CONFIG_SBIUNIT) += string_test_suite
libsbi-objs-$(CONFIG_SBIUNIT) += tests/sbi_string_test.o
```
Now, run `make clean` in order to regenerate the carray-related files.
Recompile OpenSBI with the CONFIG_SBIUNIT option enabled and run it in QEMU.
You will see something like this:
```
# make PLATFORM=generic run
...
# Running SBIUNIT tests #
...
## Running test suite: string_test_suite
[PASSED] strlen_test
1 PASSED / 0 FAILED / 1 TOTAL
```
Now let's try to change this test in the way that it will fail:
```c
- SBIUNIT_EXPECT_EQ(test, sbi_strlen("Hello"), 5);
+ SBIUNIT_EXPECT_EQ(test, sbi_strlen("Hello"), 100);
```
`make all` and `make run` it again:
```
...
# Running SBIUNIT tests #
...
## Running test suite: string_test_suite
[SBIUnit] [.../opensbi/lib/sbi/tests/sbi_string_test.c:6]: strlen_test: Condition "(sbi_strlen("Hello")) == (100)" expected to be true!
[FAILED] strlen_test
0 PASSED / 1 FAILED / 1 TOTAL
```
Covering the static functions / using the static definitions
------------------------------------------------------------
SBIUnit also allows you to test static functions. In order to do so, simply
include your test source in the file you would like to test. Complementing the
example above, just add this to the `lib/sbi/sbi_string.c` file:
```c
#ifdef CONFIG_SBIUNIT
#include "tests/sbi_string_test.c"
#endif
```
In this case you should only add a new carray entry pointing to the test suite
to `lib/sbi/tests/objects.mk`:
```lang-makefile
...
carray-sbi_unit_tests-$(CONFIG_SBIUNIT) += string_test_suite
```
You don't have to compile the `sbi_string_test.o` separately, because the
test code will be included into the `sbi_string` object file.
"Mocking" the structures
------------------------
See the example of structure "mocking" in `lib/sbi/tests/sbi_console_test.c`,
where the sbi_console_device structure was mocked to be used in various
console-related functions in order to test them.
API Reference
-------------
All of the `SBIUNIT_EXPECT_*` macros will cause a test case to fail if the
corresponding conditions are not met, however, the execution of a particular
test case will not be stopped.
All of the `SBIUNIT_ASSERT_*` macros will cause a test case to fail and stop
immediately, triggering a panic.

View File

@@ -14,8 +14,8 @@
#include <sbi/sbi_scratch.h>
#include <sbi/sbi_trap.h>
#define BOOT_STATUS_RELOCATE_DONE 1
#define BOOT_STATUS_BOOT_HART_DONE 2
#define BOOT_LOTTERY_ACQUIRED 1
#define BOOT_STATUS_BOOT_HART_DONE 1
.macro MOV_3R __d0, __s0, __d1, __s1, __d2, __s2
add \__d0, \__s0, zero
@@ -31,15 +31,14 @@
add \__d4, \__s4, zero
.endm
/*
* If __start_reg <= __check_reg and __check_reg < __end_reg then
* jump to __pass
*/
.macro BRANGE __start_reg, __end_reg, __check_reg, __jump_lable
blt \__check_reg, \__start_reg, 999f
bge \__check_reg, \__end_reg, 999f
j \__jump_lable
999:
.macro CLEAR_MDT tmp
#if __riscv_xlen == 32
li \tmp, MSTATUSH_MDT
csrc CSR_MSTATUSH, \tmp
#else
li \tmp, MSTATUS_MDT
csrc CSR_MSTATUS, \tmp
#endif
.endm
.section .entry, "ax", %progbits
@@ -55,27 +54,18 @@ _start:
li a7, -1
beq a6, a7, _try_lottery
/* Jump to relocation wait loop if we are not boot hart */
bne a0, a6, _wait_relocate_copy_done
bne a0, a6, _wait_for_boot_hart
_try_lottery:
/* Jump to relocation wait loop if we don't get relocation lottery */
lla a6, _relocate_lottery
li a7, 1
amoadd.w a6, a7, (a6)
bnez a6, _wait_relocate_copy_done
lla a6, _boot_lottery
li a7, BOOT_LOTTERY_ACQUIRED
amoswap.w a6, a7, (a6)
bnez a6, _wait_for_boot_hart
/* Save load address */
lla t0, _load_start
lla t1, _fw_start
REG_S t1, 0(t0)
#ifdef FW_PIC
/* relocate the global table content */
lla t0, _link_start
REG_L t0, 0(t0)
/* t1 shall has the address of _fw_start */
sub t2, t1, t0
lla t3, _runtime_offset
REG_S t2, (t3)
li t0, FW_TEXT_START /* link start */
lla t1, _fw_start /* load start */
sub t2, t1, t0 /* load offset */
lla t0, __rel_dyn_start
lla t1, __rel_dyn_end
beq t0, t1, _relocate_done
@@ -92,103 +82,10 @@ _try_lottery:
3:
addi t0, t0, (REGBYTES * 3)
blt t0, t1, 2b
j _relocate_done
_wait_relocate_copy_done:
j _wait_for_boot_hart
#else
/* Relocate if load address != link address */
_relocate:
lla t0, _link_start
REG_L t0, 0(t0)
lla t1, _link_end
REG_L t1, 0(t1)
lla t2, _load_start
REG_L t2, 0(t2)
beq t0, t2, _relocate_done
sub t3, t1, t0
add t3, t3, t2
lla t4, _relocate_done
sub t4, t4, t2
add t4, t4, t0
blt t2, t0, _relocate_copy_to_upper
_relocate_copy_to_lower:
ble t1, t2, _relocate_copy_to_lower_loop
lla t3, _relocate_lottery
BRANGE t2, t1, t3, _start_hang
lla t3, _boot_status
BRANGE t2, t1, t3, _start_hang
lla t3, _relocate
lla t5, _relocate_done
BRANGE t2, t1, t3, _start_hang
BRANGE t2, t1, t5, _start_hang
BRANGE t3, t5, t2, _start_hang
_relocate_copy_to_lower_loop:
REG_L t3, 0(t2)
REG_S t3, 0(t0)
add t0, t0, __SIZEOF_POINTER__
add t2, t2, __SIZEOF_POINTER__
blt t0, t1, _relocate_copy_to_lower_loop
jr t4
_relocate_copy_to_upper:
ble t3, t0, _relocate_copy_to_upper_loop
lla t2, _relocate_lottery
BRANGE t0, t3, t2, _start_hang
lla t2, _boot_status
BRANGE t0, t3, t2, _start_hang
lla t2, _relocate
lla t5, _relocate_done
BRANGE t0, t3, t2, _start_hang
BRANGE t0, t3, t5, _start_hang
BRANGE t2, t5, t0, _start_hang
_relocate_copy_to_upper_loop:
add t3, t3, -__SIZEOF_POINTER__
add t1, t1, -__SIZEOF_POINTER__
REG_L t2, 0(t3)
REG_S t2, 0(t1)
blt t0, t1, _relocate_copy_to_upper_loop
jr t4
_wait_relocate_copy_done:
lla t0, _fw_start
lla t1, _link_start
REG_L t1, 0(t1)
beq t0, t1, _wait_for_boot_hart
lla t2, _boot_status
lla t3, _wait_for_boot_hart
sub t3, t3, t0
add t3, t3, t1
1:
/* waitting for relocate copy done (_boot_status == 1) */
li t4, BOOT_STATUS_RELOCATE_DONE
REG_L t5, 0(t2)
/* Reduce the bus traffic so that boot hart may proceed faster */
nop
nop
nop
bgt t4, t5, 1b
jr t3
#endif
_relocate_done:
/*
* Mark relocate copy done
* Use _boot_status copy relative to the load address
*/
lla t0, _boot_status
#ifndef FW_PIC
lla t1, _link_start
REG_L t1, 0(t1)
lla t2, _load_start
REG_L t2, 0(t2)
sub t0, t0, t1
add t0, t0, t2
#endif
li t1, BOOT_STATUS_RELOCATE_DONE
REG_S t1, 0(t0)
fence rw, rw
/* At this point we are running from link address */
/* Reset all registers for boot HART */
/* Reset all registers except ra, a0, a1, a2, a3 and a4 for boot HART */
li ra, 0
call _reset_regs
@@ -204,6 +101,14 @@ _bss_zero:
lla s4, _start_hang
csrw CSR_MTVEC, s4
/*
* While at this point, trap handling is rudimentary, if a trap happens,
* it will end up in _start_hang which is enough to hook up a GDB. Clear
* MDT to avoid generating a double trap and thus entering a
* critical-error state.
*/
CLEAR_MDT t0
/* Setup temporary stack */
lla s4, _fw_end
li s5, (SBI_SCRATCH_SIZE * 2)
@@ -319,10 +224,8 @@ _scratch_init:
/* Store hartid-to-scratch function address in scratch space */
lla a4, _hartid_to_scratch
REG_S a4, SBI_SCRATCH_HARTID_TO_SCRATCH_OFFSET(tp)
/* Store trap-exit function address in scratch space */
lla a4, _trap_exit
REG_S a4, SBI_SCRATCH_TRAP_EXIT_OFFSET(tp)
/* Clear tmp0 in scratch space */
/* Clear trap_context and tmp0 in scratch space */
REG_S zero, SBI_SCRATCH_TRAP_CONTEXT_OFFSET(tp)
REG_S zero, SBI_SCRATCH_TMP0_OFFSET(tp)
/* Store firmware options in scratch space */
MOV_3R s0, a0, s1, a1, s2, a2
@@ -333,6 +236,8 @@ _scratch_init:
#endif
REG_S a0, SBI_SCRATCH_OPTIONS_OFFSET(tp)
MOV_3R a0, s0, a1, s1, a2, s2
/* Store hart index in scratch space */
REG_S t1, SBI_SCRATCH_HARTINDEX_OFFSET(tp)
/* Move to next scratch space */
add t1, t1, t2
blt t1, s7, _scratch_init
@@ -357,30 +262,14 @@ _scratch_init:
beq t1, a1, _fdt_reloc_done
/* t0 = source FDT start address */
add t0, a1, zero
/* t2 = source FDT size in big-endian */
#if __riscv_xlen == 64
lwu t2, 4(t0)
#else
lw t2, 4(t0)
#endif
/* t3 = bit[15:8] of FDT size */
add t3, t2, zero
srli t3, t3, 16
and t3, t3, a4
/* t2 = source FDT size (convert from big-endian) */
lbu t2, 7(t0)
lbu t3, 6(t0)
lbu t4, 5(t0)
lbu t5, 4(t0)
slli t3, t3, 8
/* t4 = bit[23:16] of FDT size */
add t4, t2, zero
srli t4, t4, 8
and t4, t4, a4
slli t4, t4, 16
/* t5 = bit[31:24] of FDT size */
add t5, t2, zero
and t5, t5, a4
slli t5, t5, 24
/* t2 = bit[7:0] of FDT size */
srli t2, t2, 24
and t2, t2, a4
/* t2 = FDT size in little-endian */
or t2, t2, t3
or t2, t2, t4
or t2, t2, t5
@@ -415,7 +304,7 @@ _wait_for_boot_hart:
bne t0, t1, _wait_for_boot_hart
_start_warm:
/* Reset all registers for non-boot HARTs */
/* Reset all registers except ra, a0, a1, a2, a3 and a4 for non-boot HART */
li ra, 0
call _reset_regs
@@ -424,7 +313,7 @@ _start_warm:
/* Find HART count and HART stack size */
lla a4, platform
#if __riscv_xlen == 64
#if __riscv_xlen > 32
lwu s7, SBI_PLATFORM_HART_COUNT_OFFSET(a4)
lwu s8, SBI_PLATFORM_HART_STACK_SIZE_OFFSET(a4)
#else
@@ -440,7 +329,7 @@ _start_warm:
beqz s9, 3f
li a4, 0
1:
#if __riscv_xlen == 64
#if __riscv_xlen > 32
lwu a5, (s9)
#else
lw a5, (s9)
@@ -469,27 +358,16 @@ _start_warm:
/* Setup trap handler */
lla a4, _trap_handler
#if __riscv_xlen == 32
csrr a5, CSR_MISA
srli a5, a5, ('H' - 'A')
andi a5, a5, 0x1
beq a5, zero, _skip_trap_handler_rv32_hyp
lla a4, _trap_handler_rv32_hyp
_skip_trap_handler_rv32_hyp:
#endif
beq a5, zero, _skip_trap_handler_hyp
lla a4, _trap_handler_hyp
_skip_trap_handler_hyp:
csrw CSR_MTVEC, a4
#if __riscv_xlen == 32
/* Override trap exit for H-extension */
csrr a5, CSR_MISA
srli a5, a5, ('H' - 'A')
andi a5, a5, 0x1
beq a5, zero, _skip_trap_exit_rv32_hyp
lla a4, _trap_exit_rv32_hyp
csrr a5, CSR_MSCRATCH
REG_S a4, SBI_SCRATCH_TRAP_EXIT_OFFSET(a5)
_skip_trap_exit_rv32_hyp:
#endif
/* Clear MDT here again for all harts */
CLEAR_MDT t0
/* Initialize SBI runtime */
csrr a0, CSR_MSCRATCH
@@ -500,20 +378,10 @@ _skip_trap_exit_rv32_hyp:
.data
.align 3
#ifdef FW_PIC
_runtime_offset:
RISCV_PTR 0
#endif
_relocate_lottery:
_boot_lottery:
RISCV_PTR 0
_boot_status:
RISCV_PTR 0
_load_start:
RISCV_PTR _fw_start
_link_start:
RISCV_PTR FW_TEXT_START
_link_end:
RISCV_PTR _fw_reloc_end
.section .entry, "ax", %progbits
.align 3
@@ -527,7 +395,7 @@ _hartid_to_scratch:
* t2 -> Temporary
*/
lla t2, platform
#if __riscv_xlen == 64
#if __riscv_xlen > 32
lwu t0, SBI_PLATFORM_HART_STACK_SIZE_OFFSET(t2)
lwu t2, SBI_PLATFORM_HART_COUNT_OFFSET(t2)
#else
@@ -611,10 +479,10 @@ memcmp:
xor t0, tp, t0
/* Save original SP on exception stack */
REG_S sp, (SBI_TRAP_REGS_OFFSET(sp) - SBI_TRAP_REGS_SIZE)(t0)
REG_S sp, (SBI_TRAP_REGS_OFFSET(sp) - SBI_TRAP_CONTEXT_SIZE)(t0)
/* Set SP to exception stack and make room for trap registers */
add sp, t0, -(SBI_TRAP_REGS_SIZE)
/* Set SP to exception stack and make room for trap context */
add sp, t0, -(SBI_TRAP_CONTEXT_SIZE)
/* Restore T0 from scratch space */
REG_L t0, SBI_SCRATCH_TMP0_OFFSET(tp)
@@ -674,6 +542,35 @@ memcmp:
REG_S t6, SBI_TRAP_REGS_OFFSET(t6)(sp)
.endm
.macro TRAP_SAVE_INFO have_mstatush have_h_extension
csrr t0, CSR_MCAUSE
REG_S t0, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(cause))(sp)
csrr t0, CSR_MTVAL
REG_S t0, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(tval))(sp)
.if \have_h_extension
csrr t0, CSR_MTVAL2
REG_S t0, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(tval2))(sp)
csrr t0, CSR_MTINST
REG_S t0, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(tinst))(sp)
.if \have_mstatush
csrr t0, CSR_MSTATUSH
srli t0, t0, MSTATUSH_GVA_SHIFT
.else
csrr t0, CSR_MSTATUS
srli t0, t0, MSTATUS_GVA_SHIFT
.endif
and t0, t0, 0x1
.else
REG_S zero, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(tval2))(sp)
REG_S zero, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(tinst))(sp)
li t0, 0
.endif
REG_S t0, (SBI_TRAP_REGS_SIZE + SBI_TRAP_INFO_OFFSET(gva))(sp)
/* We are ready to take another trap, clear MDT */
CLEAR_MDT t0
.endm
.macro TRAP_CALL_C_ROUTINE
/* Call C routine */
add a0, sp, zero
@@ -714,15 +611,18 @@ memcmp:
.endm
.macro TRAP_RESTORE_MEPC_MSTATUS have_mstatush
/* Restore MEPC and MSTATUS CSRs */
REG_L t0, SBI_TRAP_REGS_OFFSET(mepc)(a0)
csrw CSR_MEPC, t0
REG_L t0, SBI_TRAP_REGS_OFFSET(mstatus)(a0)
csrw CSR_MSTATUS, t0
/*
* Restore MSTATUS and MEPC CSRs starting with MSTATUS/H to set MDT
* flags since we can not take a trap now or MEPC would be cloberred
*/
.if \have_mstatush
REG_L t0, SBI_TRAP_REGS_OFFSET(mstatusH)(a0)
csrw CSR_MSTATUSH, t0
.endif
REG_L t0, SBI_TRAP_REGS_OFFSET(mstatus)(a0)
csrw CSR_MSTATUS, t0
REG_L t0, SBI_TRAP_REGS_OFFSET(mepc)(a0)
csrw CSR_MEPC, t0
.endm
.macro TRAP_RESTORE_A0_T0
@@ -736,7 +636,6 @@ memcmp:
.section .entry, "ax", %progbits
.align 3
.globl _trap_handler
.globl _trap_exit
_trap_handler:
TRAP_SAVE_AND_SETUP_SP_T0
@@ -744,9 +643,10 @@ _trap_handler:
TRAP_SAVE_GENERAL_REGS_EXCEPT_SP_T0
TRAP_SAVE_INFO 0 0
TRAP_CALL_C_ROUTINE
_trap_exit:
TRAP_RESTORE_GENERAL_REGS_EXCEPT_A0_T0
TRAP_RESTORE_MEPC_MSTATUS 0
@@ -755,29 +655,39 @@ _trap_exit:
mret
#if __riscv_xlen == 32
.section .entry, "ax", %progbits
.align 3
.globl _trap_handler_rv32_hyp
.globl _trap_exit_rv32_hyp
_trap_handler_rv32_hyp:
.globl _trap_handler_hyp
_trap_handler_hyp:
TRAP_SAVE_AND_SETUP_SP_T0
#if __riscv_xlen == 32
TRAP_SAVE_MEPC_MSTATUS 1
#else
TRAP_SAVE_MEPC_MSTATUS 0
#endif
TRAP_SAVE_GENERAL_REGS_EXCEPT_SP_T0
#if __riscv_xlen == 32
TRAP_SAVE_INFO 1 1
#else
TRAP_SAVE_INFO 0 1
#endif
TRAP_CALL_C_ROUTINE
_trap_exit_rv32_hyp:
TRAP_RESTORE_GENERAL_REGS_EXCEPT_A0_T0
#if __riscv_xlen == 32
TRAP_RESTORE_MEPC_MSTATUS 1
#else
TRAP_RESTORE_MEPC_MSTATUS 0
#endif
TRAP_RESTORE_A0_T0
mret
#endif
.section .entry, "ax", %progbits
.align 3
@@ -786,7 +696,7 @@ _reset_regs:
/* flush the instruction cache */
fence.i
/* Reset all registers except ra, a0, a1 and a2 */
/* Reset all registers except ra, a0, a1, a2, a3 and a4 */
li sp, 0
li gp, 0
li tp, 0
@@ -795,8 +705,6 @@ _reset_regs:
li t2, 0
li s0, 0
li s1, 0
li a3, 0
li a4, 0
li a5, 0
li a6, 0
li a7, 0

View File

@@ -20,6 +20,7 @@
PROVIDE(_text_start = .);
*(.entry)
*(.text)
*(.text.*)
. = ALIGN(8);
PROVIDE(_text_end = .);
}
@@ -38,6 +39,11 @@
. = ALIGN(8);
}
.dynsym :
{
*(.dynsym)
}
. = ALIGN(0x1000); /* Ensure next section is page aligned */
.rela.dyn : {

View File

@@ -11,12 +11,6 @@
#include "fw_base.S"
.section .entry, "ax", %progbits
.align 3
_bad_dynamic_info:
wfi
j _bad_dynamic_info
.section .entry, "ax", %progbits
.align 3
.global fw_boot_hart
@@ -30,10 +24,10 @@ fw_boot_hart:
/* Sanity checks */
li a1, FW_DYNAMIC_INFO_MAGIC_VALUE
REG_L a0, FW_DYNAMIC_INFO_MAGIC_OFFSET(a2)
bne a0, a1, _bad_dynamic_info
bne a0, a1, _start_hang
li a1, FW_DYNAMIC_INFO_VERSION_MAX
REG_L a0, FW_DYNAMIC_INFO_VERSION_OFFSET(a2)
bgt a0, a1, _bad_dynamic_info
bgt a0, a1, _start_hang
/* Read boot HART id */
li a1, FW_DYNAMIC_INFO_VERSION_2

View File

@@ -46,6 +46,10 @@ fw_save_info:
fw_next_arg1:
#ifdef FW_JUMP_FDT_ADDR
li a0, FW_JUMP_FDT_ADDR
#elif defined(FW_JUMP_FDT_OFFSET)
lla a0, _fw_start
li a1, FW_JUMP_FDT_OFFSET
add a0, a0, a1
#else
add a0, a1, zero
#endif
@@ -59,8 +63,16 @@ fw_next_arg1:
* The next address should be returned in 'a0'.
*/
fw_next_addr:
#ifdef FW_JUMP_ADDR
lla a0, _jump_addr
REG_L a0, (a0)
#elif defined(FW_JUMP_OFFSET)
lla a0, _fw_start
li a1, FW_JUMP_OFFSET
add a0, a0, a1
#else
#error "Must define at least FW_JUMP_ADDR or FW_JUMP_OFFSET"
#endif
ret
.section .entry, "ax", %progbits
@@ -86,11 +98,9 @@ fw_options:
add a0, zero, zero
ret
#ifndef FW_JUMP_ADDR
#error "Must define FW_JUMP_ADDR"
#endif
#ifdef FW_JUMP_ADDR
.section .rodata
.align 3
_jump_addr:
RISCV_PTR FW_JUMP_ADDR
#endif

View File

@@ -46,6 +46,10 @@ fw_save_info:
fw_next_arg1:
#ifdef FW_PAYLOAD_FDT_ADDR
li a0, FW_PAYLOAD_FDT_ADDR
#elif defined(FW_PAYLOAD_FDT_OFFSET)
lla a0, _fw_start
li a1, FW_PAYLOAD_FDT_OFFSET
add a0, a0, a1
#else
add a0, a1, zero
#endif

View File

@@ -13,19 +13,10 @@ firmware-cflags-y +=
firmware-asflags-y +=
firmware-ldflags-y +=
ifndef FW_PIC
FW_PIC := $(OPENSBI_LD_PIE)
endif
ifeq ($(FW_PIC),y)
firmware-genflags-y += -DFW_PIC
firmware-asflags-y += -fpic
firmware-cflags-y += -fPIE -pie
firmware-ldflags-y += -Wl,--no-dynamic-linker -Wl,-pie
endif
ifdef FW_TEXT_START
firmware-genflags-y += -DFW_TEXT_START=$(FW_TEXT_START)
else
firmware-genflags-y += -DFW_TEXT_START=0x0
endif
ifdef FW_FDT_PATH
@@ -38,9 +29,15 @@ endif
firmware-bins-$(FW_DYNAMIC) += fw_dynamic.bin
firmware-bins-$(FW_JUMP) += fw_jump.bin
ifdef FW_JUMP_OFFSET
firmware-genflags-$(FW_JUMP) += -DFW_JUMP_OFFSET=$(FW_JUMP_OFFSET)
endif
ifdef FW_JUMP_ADDR
firmware-genflags-$(FW_JUMP) += -DFW_JUMP_ADDR=$(FW_JUMP_ADDR)
endif
ifdef FW_JUMP_FDT_OFFSET
firmware-genflags-$(FW_JUMP) += -DFW_JUMP_FDT_OFFSET=$(FW_JUMP_FDT_OFFSET)
endif
ifdef FW_JUMP_FDT_ADDR
firmware-genflags-$(FW_JUMP) += -DFW_JUMP_FDT_ADDR=$(FW_JUMP_FDT_ADDR)
endif
@@ -59,6 +56,9 @@ ifdef FW_PAYLOAD_ALIGN
firmware-genflags-$(FW_PAYLOAD) += -DFW_PAYLOAD_ALIGN=$(FW_PAYLOAD_ALIGN)
endif
ifdef FW_PAYLOAD_FDT_OFFSET
firmware-genflags-$(FW_PAYLOAD) += -DFW_PAYLOAD_FDT_OFFSET=$(FW_PAYLOAD_FDT_OFFSET)
endif
ifdef FW_PAYLOAD_FDT_ADDR
firmware-genflags-$(FW_PAYLOAD) += -DFW_PAYLOAD_FDT_ADDR=$(FW_PAYLOAD_FDT_ADDR)
endif

View File

@@ -101,6 +101,14 @@
__v; \
})
/* Variant of csr_read() that allows the compiler to cache the value. */
#define csr_read_relaxed(csr) \
({ \
register unsigned long __v; \
__asm__ ("csrr %0, " __ASM_STR(csr) : "=r"(__v)); \
__v; \
})
#define csr_write(csr, val) \
({ \
unsigned long __v = (unsigned long)(val); \
@@ -163,7 +171,7 @@ void csr_write_num(int csr_num, unsigned long val);
} while (0)
/* Get current HART id */
#define current_hartid() ((unsigned int)csr_read(CSR_MHARTID))
#define current_hartid() ((unsigned int)csr_read_relaxed(CSR_MHARTID))
/* determine CPU extension, return non-zero support */
int misa_extension_imp(char ext);

View File

@@ -40,7 +40,11 @@
#define smp_wmb() RISCV_FENCE(w,w)
/* CPU relax for busy loop */
#define cpu_relax() asm volatile ("" : : : "memory")
#define cpu_relax() \
do { \
unsigned long __t; \
__asm__ __volatile__ ("div %0, %0, zero" : "=r" (__t)); \
} while (0)
/* clang-format on */

249
include/sbi/riscv_dbtr.h Normal file
View File

@@ -0,0 +1,249 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2023 Ventana Micro System, Inc.
*
* Authors:
* Himanshu Chauhan <hchauhan@ventanamicro.com>
*/
#ifndef __RISCV_DBTR_H__
#define __RISCV_DBTR_H__
#define RV_MAX_TRIGGERS 32
enum {
RISCV_DBTR_TRIG_NONE = 0,
RISCV_DBTR_TRIG_LEGACY,
RISCV_DBTR_TRIG_MCONTROL,
RISCV_DBTR_TRIG_ICOUNT,
RISCV_DBTR_TRIG_ITRIGGER,
RISCV_DBTR_TRIG_ETRIGGER,
RISCV_DBTR_TRIG_MCONTROL6,
};
#define RV_DBTR_BIT(_prefix, _name) \
RV_DBTR_##_prefix##_##_name##_BIT
#define RV_DBTR_BIT_MASK(_prefix, _name) \
RV_DBTR_##_prefix##_name##_BIT_MASK
#define RV_DBTR_DECLARE_BIT(_prefix, _name, _val) \
RV_DBTR_BIT(_prefix, _name) = _val
#define RV_DBTR_DECLARE_BIT_MASK(_prefix, _name, _width) \
RV_DBTR_BIT_MASK(_prefix, _name) = \
(((1UL << _width) - 1) << RV_DBTR_BIT(_prefix, _name))
#define CLEAR_DBTR_BIT(_target, _prefix, _bit_name) \
__clear_bit(RV_DBTR_BIT(_prefix, _bit_name), &_target)
#define SET_DBTR_BIT(_target, _prefix, _bit_name) \
__set_bit(RV_DBTR_BIT(_prefix, _bit_name), &_target)
/* Trigger Data 1 */
enum {
RV_DBTR_DECLARE_BIT(TDATA1, DATA, 0),
#if __riscv_xlen == 64
RV_DBTR_DECLARE_BIT(TDATA1, DMODE, 59),
RV_DBTR_DECLARE_BIT(TDATA1, TYPE, 60),
#elif __riscv_xlen == 32
RV_DBTR_DECLARE_BIT(TDATA1, DMODE, 27),
RV_DBTR_DECLARE_BIT(TDATA1, TYPE, 28),
#else
#error "Unknown __riscv_xlen"
#endif
};
enum {
#if __riscv_xlen == 64
RV_DBTR_DECLARE_BIT_MASK(TDATA1, DATA, 59),
#elif __riscv_xlen == 32
RV_DBTR_DECLARE_BIT_MASK(TDATA1, DATA, 27),
#else
#error "Unknown __riscv_xlen"
#endif
RV_DBTR_DECLARE_BIT_MASK(TDATA1, DMODE, 1),
RV_DBTR_DECLARE_BIT_MASK(TDATA1, TYPE, 4),
};
/* MC - Match Control Type Register */
enum {
RV_DBTR_DECLARE_BIT(MC, LOAD, 0),
RV_DBTR_DECLARE_BIT(MC, STORE, 1),
RV_DBTR_DECLARE_BIT(MC, EXEC, 2),
RV_DBTR_DECLARE_BIT(MC, U, 3),
RV_DBTR_DECLARE_BIT(MC, S, 4),
RV_DBTR_DECLARE_BIT(MC, RES2, 5),
RV_DBTR_DECLARE_BIT(MC, M, 6),
RV_DBTR_DECLARE_BIT(MC, MATCH, 7),
RV_DBTR_DECLARE_BIT(MC, CHAIN, 11),
RV_DBTR_DECLARE_BIT(MC, ACTION, 12),
RV_DBTR_DECLARE_BIT(MC, SIZELO, 16),
RV_DBTR_DECLARE_BIT(MC, TIMING, 18),
RV_DBTR_DECLARE_BIT(MC, SELECT, 19),
RV_DBTR_DECLARE_BIT(MC, HIT, 20),
#if __riscv_xlen >= 64
RV_DBTR_DECLARE_BIT(MC, SIZEHI, 21),
#endif
#if __riscv_xlen == 64
RV_DBTR_DECLARE_BIT(MC, MASKMAX, 53),
RV_DBTR_DECLARE_BIT(MC, DMODE, 59),
RV_DBTR_DECLARE_BIT(MC, TYPE, 60),
#elif __riscv_xlen == 32
RV_DBTR_DECLARE_BIT(MC, MASKMAX, 21),
RV_DBTR_DECLARE_BIT(MC, DMODE, 27),
RV_DBTR_DECLARE_BIT(MC, TYPE, 28),
#else
#error "Unknown __riscv_xlen"
#endif
};
enum {
RV_DBTR_DECLARE_BIT_MASK(MC, LOAD, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, STORE, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, EXEC, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, U, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, S, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, RES2, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, M, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, MATCH, 4),
RV_DBTR_DECLARE_BIT_MASK(MC, CHAIN, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, ACTION, 4),
RV_DBTR_DECLARE_BIT_MASK(MC, SIZELO, 2),
RV_DBTR_DECLARE_BIT_MASK(MC, TIMING, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, SELECT, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, HIT, 1),
#if __riscv_xlen >= 64
RV_DBTR_DECLARE_BIT_MASK(MC, SIZEHI, 2),
#endif
RV_DBTR_DECLARE_BIT_MASK(MC, MASKMAX, 6),
RV_DBTR_DECLARE_BIT_MASK(MC, DMODE, 1),
RV_DBTR_DECLARE_BIT_MASK(MC, TYPE, 4),
};
/* MC6 - Match Control 6 Type Register */
enum {
RV_DBTR_DECLARE_BIT(MC6, LOAD, 0),
RV_DBTR_DECLARE_BIT(MC6, STORE, 1),
RV_DBTR_DECLARE_BIT(MC6, EXEC, 2),
RV_DBTR_DECLARE_BIT(MC6, U, 3),
RV_DBTR_DECLARE_BIT(MC6, S, 4),
RV_DBTR_DECLARE_BIT(MC6, RES2, 5),
RV_DBTR_DECLARE_BIT(MC6, M, 6),
RV_DBTR_DECLARE_BIT(MC6, MATCH, 7),
RV_DBTR_DECLARE_BIT(MC6, CHAIN, 11),
RV_DBTR_DECLARE_BIT(MC6, ACTION, 12),
RV_DBTR_DECLARE_BIT(MC6, SIZE, 16),
RV_DBTR_DECLARE_BIT(MC6, TIMING, 20),
RV_DBTR_DECLARE_BIT(MC6, SELECT, 21),
RV_DBTR_DECLARE_BIT(MC6, HIT, 22),
RV_DBTR_DECLARE_BIT(MC6, VU, 23),
RV_DBTR_DECLARE_BIT(MC6, VS, 24),
#if __riscv_xlen == 64
RV_DBTR_DECLARE_BIT(MC6, DMODE, 59),
RV_DBTR_DECLARE_BIT(MC6, TYPE, 60),
#elif __riscv_xlen == 32
RV_DBTR_DECLARE_BIT(MC6, DMODE, 27),
RV_DBTR_DECLARE_BIT(MC6, TYPE, 28),
#else
#error "Unknown __riscv_xlen"
#endif
};
enum {
RV_DBTR_DECLARE_BIT_MASK(MC6, LOAD, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, STORE, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, EXEC, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, U, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, S, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, RES2, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, M, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, MATCH, 4),
RV_DBTR_DECLARE_BIT_MASK(MC6, CHAIN, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, ACTION, 4),
RV_DBTR_DECLARE_BIT_MASK(MC6, SIZE, 4),
RV_DBTR_DECLARE_BIT_MASK(MC6, TIMING, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, SELECT, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, HIT, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, VU, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, VS, 1),
#if __riscv_xlen == 64
RV_DBTR_DECLARE_BIT_MASK(MC6, DMODE, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, TYPE, 4),
#elif __riscv_xlen == 32
RV_DBTR_DECLARE_BIT_MASK(MC6, DMODE, 1),
RV_DBTR_DECLARE_BIT_MASK(MC6, TYPE, 4),
#else
#error "Unknown __riscv_xlen"
#endif
};
#define RV_DBTR_SET_TDATA1_TYPE(_t1, _type) \
do { \
_t1 &= ~RV_DBTR_BIT_MASK(TDATA1, TYPE); \
_t1 |= (((unsigned long)_type \
<< RV_DBTR_BIT(TDATA1, TYPE)) \
& RV_DBTR_BIT_MASK(TDATA1, TYPE)); \
}while (0);
#define RV_DBTR_SET_MC_TYPE(_t1, _type) \
do { \
_t1 &= ~RV_DBTR_BIT_MASK(MC, TYPE); \
_t1 |= (((unsigned long)_type \
<< RV_DBTR_BIT(MC, TYPE)) \
& RV_DBTR_BIT_MASK(MC, TYPE)); \
}while (0);
#define RV_DBTR_SET_MC6_TYPE(_t1, _type) \
do { \
_t1 &= ~RV_DBTR_BIT_MASK(MC6, TYPE); \
_t1 |= (((unsigned long)_type \
<< RV_DBTR_BIT(MC6, TYPE)) \
& RV_DBTR_BIT_MASK(MC6, TYPE)); \
}while (0);
#define RV_DBTR_SET_MC_EXEC(_t1) \
SET_DBTR_BIT(_t1, MC, EXEC)
#define RV_DBTR_SET_MC_LOAD(_t1) \
SET_DBTR_BIT(_t1, MC, LOAD)
#define RV_DBTR_SET_MC_STORE(_t1) \
SET_DBTR_BIT(_t1, MC, STORE)
#define RV_DBTR_SET_MC_SIZELO(_t1, _val) \
do { \
_t1 &= ~RV_DBTR_BIT_MASK(MC, SIZELO); \
_t1 |= ((_val << RV_DBTR_BIT(MC, SIZELO)) \
& RV_DBTR_BIT_MASK(MC, SIZELO)); \
} while(0);
#define RV_DBTR_SET_MC_SIZEHI(_t1, _val) \
do { \
_t1 &= ~RV_DBTR_BIT_MASK(MC, SIZEHI); \
_t1 |= ((_val << RV_DBTR_BIT(MC, SIZEHI)) \
& RV_DBTR_BIT_MASK(MC, SIZEHI)); \
} while(0);
#define RV_DBTR_SET_MC6_EXEC(_t1) \
SET_DBTR_BIT(_t1, MC6, EXEC)
#define RV_DBTR_SET_MC6_LOAD(_t1) \
SET_DBTR_BIT(_t1, MC6, LOAD)
#define RV_DBTR_SET_MC6_STORE(_t1) \
SET_DBTR_BIT(_t1, MC6, STORE)
#define RV_DBTR_SET_MC6_SIZE(_t1, _val) \
do { \
_t1 &= ~RV_DBTR_BIT_MASK(MC6, SIZE); \
_t1 |= ((_val << RV_DBTR_BIT(MC6, SIZE)) \
& RV_DBTR_BIT_MASK(MC6, SIZE)); \
} while(0);
typedef unsigned long riscv_dbtr_tdata1_mcontrol_t;
typedef unsigned long riscv_dbtr_tdata1_mcontrol6_t;
typedef unsigned long riscv_dbtr_tdata1_t;
#endif /* __RISCV_DBTR_H__ */

View File

@@ -32,6 +32,7 @@
#define MSTATUS_TVM _UL(0x00100000)
#define MSTATUS_TW _UL(0x00200000)
#define MSTATUS_TSR _UL(0x00400000)
#define MSTATUS_SPELP _UL(0x00800000)
#define MSTATUS32_SD _UL(0x80000000)
#if __riscv_xlen == 64
#define MSTATUS_UXL _ULL(0x0000000300000000)
@@ -41,12 +42,16 @@
#define MSTATUS_GVA _ULL(0x0000004000000000)
#define MSTATUS_GVA_SHIFT 38
#define MSTATUS_MPV _ULL(0x0000008000000000)
#define MSTATUS_MPELP _ULL(0x0000020000000000)
#define MSTATUS_MDT _ULL(0x0000040000000000)
#else
#define MSTATUSH_SBE _UL(0x00000010)
#define MSTATUSH_MBE _UL(0x00000020)
#define MSTATUSH_GVA _UL(0x00000040)
#define MSTATUSH_GVA_SHIFT 6
#define MSTATUSH_MPV _UL(0x00000080)
#define MSTATUSH_MPELP _UL(0x00000200)
#define MSTATUSH_MDT _UL(0x00000400)
#endif
#define MSTATUS32_SD _UL(0x80000000)
#define MSTATUS64_SD _ULL(0x8000000000000000)
@@ -80,6 +85,8 @@
#define HSTATUS_GVA _UL(0x00000040)
#define HSTATUS_VSBE _UL(0x00000020)
#define MCAUSE_IRQ_MASK (_UL(1) << (__riscv_xlen - 1))
#define IRQ_S_SOFT 1
#define IRQ_VS_SOFT 2
#define IRQ_M_SOFT 3
@@ -205,10 +212,19 @@
#endif
#define MHPMEVENT_SSCOF_MASK _ULL(0xFFFF000000000000)
#define MHPMEVENT_SSCOF_MASK _ULL(0xFF00000000000000)
#define ENVCFG_STCE (_ULL(1) << 63)
#define ENVCFG_PBMTE (_ULL(1) << 62)
#define ENVCFG_ADUE_SHIFT 61
#define ENVCFG_ADUE (_ULL(1) << ENVCFG_ADUE_SHIFT)
#define ENVCFG_CDE (_ULL(1) << 60)
#define ENVCFG_DTE_SHIFT 59
#define ENVCFG_DTE (_ULL(1) << ENVCFG_DTE_SHIFT)
#define ENVCFG_PMM (_ULL(0x3) << 32)
#define ENVCFG_PMM_PMLEN_0 (_ULL(0x0) << 32)
#define ENVCFG_PMM_PMLEN_7 (_ULL(0x2) << 32)
#define ENVCFG_PMM_PMLEN_16 (_ULL(0x3) << 32)
#define ENVCFG_CBZE (_UL(1) << 7)
#define ENVCFG_CBCFE (_UL(1) << 6)
#define ENVCFG_CBIE_SHIFT 4
@@ -216,6 +232,10 @@
#define ENVCFG_CBIE_ILL _UL(0x0)
#define ENVCFG_CBIE_FLUSH _UL(0x1)
#define ENVCFG_CBIE_INV _UL(0x3)
#define ENVCFG_SSE_SHIFT 3
#define ENVCFG_SSE (_UL(1) << ENVCFG_SSE_SHIFT)
#define ENVCFG_LPE_SHIFT 2
#define ENVCFG_LPE (_UL(1) << ENVCFG_LPE_SHIFT)
#define ENVCFG_FIOM _UL(0x1)
/* ===== User-level CSRs ===== */
@@ -224,6 +244,7 @@
#define CSR_USTATUS 0x000
#define CSR_UIE 0x004
#define CSR_UTVEC 0x005
#define CSR_SSP 0x011
/* User Trap Handling (N-extension) */
#define CSR_USCRATCH 0x040
@@ -314,6 +335,9 @@
/* Supervisor Configuration */
#define CSR_SENVCFG 0x10a
/* Supervisor Conter Inhibit */
#define CSR_SCOUNTINHIBIT 0x120
/* Supervisor Trap Handling */
#define CSR_SSCRATCH 0x140
#define CSR_SEPC 0x141
@@ -328,9 +352,14 @@
/* Supervisor Protection and Translation */
#define CSR_SATP 0x180
/* Supervisor-Level Window to Indirectly Accessed Registers (AIA) */
/* Supervisor Indirect Register Alias */
#define CSR_SISELECT 0x150
#define CSR_SIREG 0x151
#define CSR_SIREG2 0x152
#define CSR_SIREG3 0x153
#define CSR_SIREG4 0x155
#define CSR_SIREG5 0x156
#define CSR_SIREG6 0x157
/* Supervisor-Level Interrupts (AIA) */
#define CSR_STOPEI 0x15c
@@ -391,9 +420,14 @@
#define CSR_HVIPRIO1 0x646
#define CSR_HVIPRIO2 0x647
/* VS-Level Window to Indirectly Accessed Registers (H-extension with AIA) */
/* Virtual Supervisor Indirect Alias */
#define CSR_VSISELECT 0x250
#define CSR_VSIREG 0x251
#define CSR_VSIREG2 0x252
#define CSR_VSIREG3 0x253
#define CSR_VSIREG4 0x255
#define CSR_VSIREG5 0x256
#define CSR_VSIREG6 0x257
/* VS-Level Interrupts (H-extension with AIA) */
#define CSR_VSTOPEI 0x25c
@@ -686,6 +720,7 @@
#define CSR_TDATA1 0x7a1
#define CSR_TDATA2 0x7a2
#define CSR_TDATA3 0x7a3
#define CSR_TINFO 0x7a4
/* Debug Mode Registers */
#define CSR_DCSR 0x7b0
@@ -693,9 +728,14 @@
#define CSR_DSCRATCH0 0x7b2
#define CSR_DSCRATCH1 0x7b3
/* Machine-Level Window to Indirectly Accessed Registers (AIA) */
/* Machine Indirect Register Alias */
#define CSR_MISELECT 0x350
#define CSR_MIREG 0x351
#define CSR_MIREG2 0x352
#define CSR_MIREG3 0x353
#define CSR_MIREG4 0x355
#define CSR_MIREG5 0x356
#define CSR_MIREG6 0x357
/* Machine-Level Interrupts (AIA) */
#define CSR_MTOPEI 0x35c
@@ -723,6 +763,12 @@
#define CSR_MVIPH 0x319
#define CSR_MIPH 0x354
/* Vector extension registers */
#define CSR_VSTART 0x8
#define CSR_VL 0xc20
#define CSR_VTYPE 0xc21
#define CSR_VLENB 0xc22
/* ===== Trap/Exception Causes ===== */
#define CAUSE_MISALIGNED_FETCH 0x0
@@ -740,6 +786,8 @@
#define CAUSE_FETCH_PAGE_FAULT 0xc
#define CAUSE_LOAD_PAGE_FAULT 0xd
#define CAUSE_STORE_PAGE_FAULT 0xf
#define CAUSE_DOUBLE_TRAP 0x10
#define CAUSE_SW_CHECK_EXCP 0x12
#define CAUSE_FETCH_GUEST_PAGE_FAULT 0x14
#define CAUSE_LOAD_GUEST_PAGE_FAULT 0x15
#define CAUSE_VIRTUAL_INST_FAULT 0x16
@@ -836,17 +884,377 @@
#define INSN_MATCH_C_FSWSP 0xe002
#define INSN_MASK_C_FSWSP 0xe003
#define INSN_MATCH_C_LHU 0x8400
#define INSN_MASK_C_LHU 0xfc43
#define INSN_MATCH_C_LH 0x8440
#define INSN_MASK_C_LH 0xfc43
#define INSN_MATCH_C_SH 0x8c00
#define INSN_MASK_C_SH 0xfc43
#define INSN_MASK_WFI 0xffffff00
#define INSN_MATCH_WFI 0x10500000
#define INSN_MASK_FENCE_TSO 0xffffffff
#define INSN_MATCH_FENCE_TSO 0x8330000f
#define INSN_MASK_VECTOR_UNIT_STRIDE 0xfdf0707f
#define INSN_MASK_VECTOR_FAULT_ONLY_FIRST 0xfdf0707f
#define INSN_MASK_VECTOR_STRIDE 0xfc00707f
#define INSN_MASK_VECTOR_WHOLE_REG 0xfff0707f
#define INSN_MASK_VECTOR_INDEXED 0xfc00707f
#define INSN_MATCH_VLUXSEG(n, bits) ((((n) - 1) << 29) | 0x04000007 | \
((bits) == 16 ? 5 : (bits) == 32 ? 6 : 7) << 12)
#define INSN_MATCH_VSUXSEG(n, bits) ((((n) - 1) << 29) | 0x04000027 | \
((bits) == 16 ? 5 : (bits) == 32 ? 6 : 7) << 12)
#define INSN_MATCH_VLOXSEG(n, bits) ((((n) - 1) << 29) | 0x0c000007 | \
((bits) == 16 ? 5 : (bits) == 32 ? 6 : 7) << 12)
#define INSN_MATCH_VSOXSEG(n, bits) ((((n) - 1) << 29) | 0x0c000027 | \
((bits) == 16 ? 5 : (bits) == 32 ? 6 : 7) << 12)
#define INSN_MATCH_VLSSEG(n, bits) ((((n) - 1) << 29) | 0x08000007 | \
((bits) == 16 ? 5 : (bits) == 32 ? 6 : 7) << 12)
#define INSN_MATCH_VSSSEG(n, bits) ((((n) - 1) << 29) | 0x08000027 | \
((bits) == 16 ? 5 : (bits) == 32 ? 6 : 7) << 12)
#define INSN_MATCH_VSSEG(n, bits) ((((n) - 1) << 29) | 0x00004027 | \
((bits) == 16 ? 5 : (bits) == 32 ? 6 : 7) << 12)
#define INSN_MATCH_VLSEG(n, bits) ((((n) - 1) << 29) | 0x00004007 | \
((bits) == 16 ? 5 : (bits) == 32 ? 6 : 7) << 12)
#define INSN_MATCH_VLSEGFF(n, bits) ((((n) - 1) << 29) | 0x1000007 | \
((bits) == 16 ? 5 : (bits) == 32 ? 6 : 7) << 12)
#define INSN_MATCH_VLE16V 0x00005007
#define INSN_MATCH_VLE32V 0x00006007
#define INSN_MATCH_VLE64V 0x00007007
#define INSN_MATCH_VSE16V 0x00005027
#define INSN_MATCH_VSE32V 0x00006027
#define INSN_MATCH_VSE64V 0x00007027
#define INSN_MATCH_VLSE16V 0x08005007
#define INSN_MATCH_VLSE32V 0x08006007
#define INSN_MATCH_VLSE64V 0x08007007
#define INSN_MATCH_VSSE16V 0x08005027
#define INSN_MATCH_VSSE32V 0x08006027
#define INSN_MATCH_VSSE64V 0x08007027
#define INSN_MATCH_VLOXEI16V 0x0c005007
#define INSN_MATCH_VLOXEI32V 0x0c006007
#define INSN_MATCH_VLOXEI64V 0x0c007007
#define INSN_MATCH_VSOXEI16V 0x0c005027
#define INSN_MATCH_VSOXEI32V 0x0c006027
#define INSN_MATCH_VSOXEI64V 0x0c007027
#define INSN_MATCH_VLUXEI16V 0x04005007
#define INSN_MATCH_VLUXEI32V 0x04006007
#define INSN_MATCH_VLUXEI64V 0x04007007
#define INSN_MATCH_VSUXEI16V 0x04005027
#define INSN_MATCH_VSUXEI32V 0x04006027
#define INSN_MATCH_VSUXEI64V 0x04007027
#define INSN_MATCH_VLE16FFV 0x01005007
#define INSN_MATCH_VLE32FFV 0x01006007
#define INSN_MATCH_VLE64FFV 0x01007007
#define INSN_MATCH_VL1RE8V 0x02800007
#define INSN_MATCH_VL1RE16V 0x02805007
#define INSN_MATCH_VL1RE32V 0x02806007
#define INSN_MATCH_VL1RE64V 0x02807007
#define INSN_MATCH_VL2RE8V 0x22800007
#define INSN_MATCH_VL2RE16V 0x22805007
#define INSN_MATCH_VL2RE32V 0x22806007
#define INSN_MATCH_VL2RE64V 0x22807007
#define INSN_MATCH_VL4RE8V 0x62800007
#define INSN_MATCH_VL4RE16V 0x62805007
#define INSN_MATCH_VL4RE32V 0x62806007
#define INSN_MATCH_VL4RE64V 0x62807007
#define INSN_MATCH_VL8RE8V 0xe2800007
#define INSN_MATCH_VL8RE16V 0xe2805007
#define INSN_MATCH_VL8RE32V 0xe2806007
#define INSN_MATCH_VL8RE64V 0xe2807007
#define INSN_MATCH_VS1RV 0x02800027
#define INSN_MATCH_VS2RV 0x22800027
#define INSN_MATCH_VS4RV 0x62800027
#define INSN_MATCH_VS8RV 0xe2800027
#define INSN_MASK_VECTOR_LOAD_STORE 0x7f
#define INSN_MATCH_VECTOR_LOAD 0x07
#define INSN_MATCH_VECTOR_STORE 0x27
#define IS_VECTOR_LOAD_STORE(insn) \
((((insn) & INSN_MASK_VECTOR_LOAD_STORE) == INSN_MATCH_VECTOR_LOAD) || \
(((insn) & INSN_MASK_VECTOR_LOAD_STORE) == INSN_MATCH_VECTOR_STORE))
#define IS_VECTOR_INSN_MATCH(insn, match, mask) \
(((insn) & (mask)) == ((match) & (mask)))
#define IS_UNIT_STRIDE_MATCH(insn, match) \
IS_VECTOR_INSN_MATCH(insn, match, INSN_MASK_VECTOR_UNIT_STRIDE)
#define IS_STRIDE_MATCH(insn, match) \
IS_VECTOR_INSN_MATCH(insn, match, INSN_MASK_VECTOR_STRIDE)
#define IS_INDEXED_MATCH(insn, match) \
IS_VECTOR_INSN_MATCH(insn, match, INSN_MASK_VECTOR_INDEXED)
#define IS_FAULT_ONLY_FIRST_MATCH(insn, match) \
IS_VECTOR_INSN_MATCH(insn, match, INSN_MASK_VECTOR_FAULT_ONLY_FIRST)
#define IS_WHOLE_REG_MATCH(insn, match) \
IS_VECTOR_INSN_MATCH(insn, match, INSN_MASK_VECTOR_WHOLE_REG)
#define IS_UNIT_STRIDE_LOAD(insn) ( \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLE16V) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLE32V) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLE64V) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(2, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(3, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(4, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(5, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(6, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(7, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(8, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(2, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(3, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(4, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(5, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(6, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(7, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(8, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(2, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(3, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(4, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(5, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(6, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(7, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VLSEG(8, 64)))
#define IS_UNIT_STRIDE_STORE(insn) ( \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSE16V) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSE32V) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSE64V) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(2, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(3, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(4, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(5, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(6, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(7, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(8, 16)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(2, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(3, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(4, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(5, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(6, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(7, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(8, 32)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(2, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(3, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(4, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(5, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(6, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(7, 64)) || \
IS_UNIT_STRIDE_MATCH(insn, INSN_MATCH_VSSEG(8, 64)))
#define IS_STRIDE_LOAD(insn) ( \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSE16V) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSE32V) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSE64V) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(2, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(3, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(4, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(5, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(6, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(7, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(8, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(2, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(3, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(4, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(5, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(6, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(7, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(8, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(2, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(3, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(4, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(5, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(6, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(7, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VLSSEG(8, 64)))
#define IS_STRIDE_STORE(insn) ( \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSE16V) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSE32V) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSE64V) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(2, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(3, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(4, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(5, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(6, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(7, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(8, 16)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(2, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(3, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(4, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(5, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(6, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(7, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(8, 32)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(2, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(3, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(4, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(5, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(6, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(7, 64)) || \
IS_STRIDE_MATCH(insn, INSN_MATCH_VSSSEG(8, 64)))
#define IS_INDEXED_LOAD(insn) ( \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXEI16V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXEI32V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXEI64V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXEI16V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXEI32V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXEI64V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(2, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(3, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(4, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(5, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(6, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(7, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(8, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(2, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(3, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(4, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(5, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(6, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(7, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(8, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(2, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(3, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(4, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(5, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(6, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(7, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLUXSEG(8, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(2, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(3, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(4, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(5, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(6, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(7, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(8, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(2, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(3, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(4, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(5, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(6, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(7, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(8, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(2, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(3, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(4, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(5, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(6, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(7, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VLOXSEG(8, 64)))
#define IS_INDEXED_STORE(insn) ( \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXEI16V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXEI32V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXEI64V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXEI16V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXEI32V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXEI64V) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(2, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(3, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(4, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(5, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(6, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(7, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(8, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(2, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(3, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(4, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(5, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(6, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(7, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(8, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(2, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(3, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(4, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(5, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(6, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(7, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSUXSEG(8, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(2, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(3, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(4, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(5, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(6, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(7, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(8, 16)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(2, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(3, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(4, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(5, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(6, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(7, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(8, 32)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(2, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(3, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(4, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(5, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(6, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(7, 64)) || \
IS_INDEXED_MATCH(insn, INSN_MATCH_VSOXSEG(8, 64)))
#define IS_FAULT_ONLY_FIRST_LOAD(insn) ( \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLE16FFV) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLE32FFV) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLE64FFV) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(2, 16)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(3, 16)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(4, 16)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(5, 16)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(6, 16)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(7, 16)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(8, 16)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(2, 32)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(3, 32)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(4, 32)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(5, 32)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(6, 32)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(7, 32)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(8, 32)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(2, 64)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(3, 64)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(4, 64)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(5, 64)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(6, 64)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(7, 64)) || \
IS_FAULT_ONLY_FIRST_MATCH(insn, INSN_MATCH_VLSEGFF(8, 64)))
#define IS_WHOLE_REG_LOAD(insn) ( \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL1RE8V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL1RE16V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL1RE32V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL1RE64V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL2RE8V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL2RE16V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL2RE32V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL2RE64V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL4RE8V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL4RE16V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL4RE32V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL4RE64V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL8RE8V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL8RE16V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL8RE32V) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VL8RE64V))
#define IS_WHOLE_REG_STORE(insn) ( \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VS1RV) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VS2RV) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VS4RV) || \
IS_WHOLE_REG_MATCH(insn, INSN_MATCH_VS8RV))
#if __riscv_xlen == 64
/* 64-bit read for VS-stage address translation (RV64) */
#define INSN_PSEUDO_VS_LOAD 0x00003000
/* 64-bit write for VS-stage address translation (RV64) */
#define INSN_PSEUDO_VS_STORE 0x00003020
@@ -862,6 +1270,12 @@
#error "Unexpected __riscv_xlen"
#endif
#define VM_MASK 0x1
#define VIEW_MASK 0x3
#define VSEW_MASK 0x3
#define VLMUL_MASK 0x7
#define VD_MASK 0x1f
#define VS2_MASK 0x1f
#define INSN_16BIT_MASK 0x3
#define INSN_32BIT_MASK 0x1c
@@ -880,6 +1294,12 @@
#endif
#define REGBYTES (1 << LOG_REGBYTES)
#define SH_VSEW 3
#define SH_VIEW 12
#define SH_VD 7
#define SH_VS2 20
#define SH_VM 25
#define SH_MEW 28
#define SH_RD 7
#define SH_RS1 15
#define SH_RS2 20
@@ -917,7 +1337,10 @@
#define REG_PTR(insn, pos, regs) \
(ulong *)((ulong)(regs) + REG_OFFSET(insn, pos))
#define GET_RM(insn) (((insn) >> 12) & 7)
#define GET_RM(insn) ((insn & MASK_FUNCT3) >> SHIFT_FUNCT3)
#define GET_RS1_NUM(insn) ((insn & MASK_RS1) >> 15)
#define GET_CSR_NUM(insn) ((insn & MASK_CSR) >> SHIFT_CSR)
#define GET_RS1(insn, regs) (*REG_PTR(insn, SH_RS1, regs))
#define GET_RS2(insn, regs) (*REG_PTR(insn, SH_RS2, regs))
@@ -929,7 +1352,32 @@
#define IMM_I(insn) ((s32)(insn) >> 20)
#define IMM_S(insn) (((s32)(insn) >> 25 << 5) | \
(s32)(((insn) >> 7) & 0x1f))
#define IS_MASKED(insn) (((insn >> SH_VM) & VM_MASK) == 0)
#define GET_VD(insn) ((insn >> SH_VD) & VD_MASK)
#define GET_VS2(insn) ((insn >> SH_VS2) & VS2_MASK)
#define GET_VIEW(insn) (((insn) >> SH_VIEW) & VIEW_MASK)
#define GET_MEW(insn) (((insn) >> SH_MEW) & 1)
#define GET_VSEW(vtype) (((vtype) >> SH_VSEW) & VSEW_MASK)
#define GET_VLMUL(vtype) ((vtype) & VLMUL_MASK)
#define GET_LEN(view) (1UL << (view))
#define GET_NF(insn) (1 + ((insn >> 29) & 7))
#define GET_VEMUL(vlmul, view, vsew) ((vlmul + view - vsew) & 7)
#define GET_EMUL(vemul) (1UL << ((vemul) >= 4 ? 0 : (vemul)))
#define MASK_FUNCT3 0x7000
#define MASK_RS1 0xf8000
#define MASK_CSR 0xfff00000
#define SHIFT_FUNCT3 12
#define SHIFT_CSR 20
#define CSRRW 1
#define CSRRS 2
#define CSRRC 3
#define CSRRWI 5
#define CSRRSI 6
#define CSRRCI 7
/* clang-format on */

View File

@@ -15,7 +15,6 @@
#include <sbi/sbi_types.h>
#define GET_PRECISION(insn) (((insn) >> 25) & 3)
#define GET_RM(insn) (((insn) >> 12) & 7)
#define PRECISION_S 0
#define PRECISION_D 1

View File

@@ -62,6 +62,11 @@ static inline void bitmap_zero(unsigned long *dst, int nbits)
}
}
static inline int bitmap_test(unsigned long *bmap, int bit)
{
return __test_bit(bit, bmap);
}
static inline void bitmap_zero_except(unsigned long *dst,
int exception, int nbits)
{

View File

@@ -14,6 +14,8 @@
#define BITS_PER_LONG (8 * __SIZEOF_LONG__)
#define BITS_PER_LONG_LONG 64
#define EXTRACT_FIELD(val, which) \
(((val) & (which)) / ((which) & ~((which)-1)))
#define INSERT_FIELD(val, which, fieldval) \
@@ -28,9 +30,13 @@
#define BIT_WORD_OFFSET(bit) ((bit) & (BITS_PER_LONG - 1))
#define BIT_ALIGN(bit, align) (((bit) + ((align) - 1)) & ~((align) - 1))
#define BIT_ULL(nr) (1ULL << (nr))
#define GENMASK(h, l) \
(((~0UL) - (1UL << (l)) + 1) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
#define GENMASK_ULL(h, l) \
(((~0ULL) - (1ULL << (l)) + 1) & (~0ULL >> (BITS_PER_LONG_LONG - 1 - (h))))
/**
* sbi_ffs - find first (less-significant) set bit in a long word.
* @word: The word to search

View File

@@ -7,7 +7,12 @@
#ifndef __SBI_BYTEORDER_H__
#define __SBI_BYTEORDER_H__
#ifdef __ASSEMBLER__
# define _conv_cast(type, val) (val)
#else
# include <sbi/sbi_types.h>
# define _conv_cast(type, val) ((type)(val))
#endif
#define BSWAP16(x) ((((x) & 0x00ff) << 8) | \
(((x) & 0xff00) >> 8))
@@ -25,37 +30,47 @@
(((x) & 0xff00000000000000ULL) >> 56))
#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ /* CPU(little-endian) */
#define cpu_to_be16(x) ((uint16_t)BSWAP16(x))
#define cpu_to_be32(x) ((uint32_t)BSWAP32(x))
#define cpu_to_be64(x) ((uint64_t)BSWAP64(x))
#define cpu_to_be16(x) _conv_cast(uint16_t, BSWAP16(x))
#define cpu_to_be32(x) _conv_cast(uint32_t, BSWAP32(x))
#define cpu_to_be64(x) _conv_cast(uint64_t, BSWAP64(x))
#define be16_to_cpu(x) ((uint16_t)BSWAP16(x))
#define be32_to_cpu(x) ((uint32_t)BSWAP32(x))
#define be64_to_cpu(x) ((uint64_t)BSWAP64(x))
#define be16_to_cpu(x) _conv_cast(uint16_t, BSWAP16(x))
#define be32_to_cpu(x) _conv_cast(uint32_t, BSWAP32(x))
#define be64_to_cpu(x) _conv_cast(uint64_t, BSWAP64(x))
#define cpu_to_le16(x) ((uint16_t)(x))
#define cpu_to_le32(x) ((uint32_t)(x))
#define cpu_to_le64(x) ((uint64_t)(x))
#define cpu_to_le16(x) _conv_cast(uint16_t, (x))
#define cpu_to_le32(x) _conv_cast(uint32_t, (x))
#define cpu_to_le64(x) _conv_cast(uint64_t, (x))
#define le16_to_cpu(x) ((uint16_t)(x))
#define le32_to_cpu(x) ((uint32_t)(x))
#define le64_to_cpu(x) ((uint64_t)(x))
#define le16_to_cpu(x) _conv_cast(uint16_t, (x))
#define le32_to_cpu(x) _conv_cast(uint32_t, (x))
#define le64_to_cpu(x) _conv_cast(uint64_t, (x))
#else /* CPU(big-endian) */
#define cpu_to_be16(x) ((uint16_t)(x))
#define cpu_to_be32(x) ((uint32_t)(x))
#define cpu_to_be64(x) ((uint64_t)(x))
#define cpu_to_be16(x) _conv_cast(uint16_t, (x))
#define cpu_to_be32(x) _conv_cast(uint32_t, (x))
#define cpu_to_be64(x) _conv_cast(uint64_t, (x))
#define be16_to_cpu(x) ((uint16_t)(x))
#define be32_to_cpu(x) ((uint32_t)(x))
#define be64_to_cpu(x) ((uint64_t)(x))
#define be16_to_cpu(x) _conv_cast(uint16_t, (x))
#define be32_to_cpu(x) _conv_cast(uint32_t, (x))
#define be64_to_cpu(x) _conv_cast(uint64_t, (x))
#define cpu_to_le16(x) ((uint16_t)BSWAP16(x))
#define cpu_to_le32(x) ((uint32_t)BSWAP32(x))
#define cpu_to_le64(x) ((uint64_t)BSWAP64(x))
#define cpu_to_le16(x) _conv_cast(uint16_t, BSWAP16(x))
#define cpu_to_le32(x) _conv_cast(uint32_t, BSWAP32(x))
#define cpu_to_le64(x) _conv_cast(uint64_t, BSWAP64(x))
#define le16_to_cpu(x) ((uint16_t)BSWAP16(x))
#define le32_to_cpu(x) ((uint32_t)BSWAP32(x))
#define le64_to_cpu(x) ((uint64_t)BSWAP64(x))
#define le16_to_cpu(x) _conv_cast(uint16_t, BSWAP16(x))
#define le32_to_cpu(x) _conv_cast(uint32_t, BSWAP32(x))
#define le64_to_cpu(x) _conv_cast(uint64_t, BSWAP64(x))
#endif
#if __riscv_xlen == 64
#define cpu_to_lle cpu_to_le64
#define lle_to_cpu le64_to_cpu
#elif __riscv_xlen == 32
#define cpu_to_lle cpu_to_le32
#define lle_to_cpu le32_to_cpu
#else
#error "Unknown __riscv_xlen"
#endif
#endif /* __SBI_BYTEORDER_H__ */

View File

@@ -58,8 +58,6 @@ void sbi_console_set_device(const struct sbi_console_device *dev);
struct sbi_scratch;
int sbi_console_init(struct sbi_scratch *scratch);
#define SBI_ASSERT(cond, args) do { \
if (unlikely(!(cond))) \
sbi_panic args; \

125
include/sbi/sbi_dbtr.h Normal file
View File

@@ -0,0 +1,125 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2023 Ventana Micro Systems, Inc.
*
* Authors:
* Himanshu Chauhan <hchauhan@ventanamicro.com>
*/
#ifndef __SBI_DBTR_H__
#define __SBI_DBTR_H__
#include <sbi/riscv_dbtr.h>
#include <sbi/sbi_types.h>
struct sbi_domain;
enum {
RV_DBTR_DECLARE_BIT(TS, MAPPED, 0), /* trigger mapped to hw trigger */
RV_DBTR_DECLARE_BIT(TS, U, 1),
RV_DBTR_DECLARE_BIT(TS, S, 2),
RV_DBTR_DECLARE_BIT(TS, VU, 3),
RV_DBTR_DECLARE_BIT(TS, VS, 4),
RV_DBTR_DECLARE_BIT(TS, HAVE_TRIG, 5), /* H/w dbtr details available */
RV_DBTR_DECLARE_BIT(TS, HW_IDX, 8), /* Hardware index of trigger */
};
enum {
RV_DBTR_DECLARE_BIT_MASK(TS, MAPPED, 1),
RV_DBTR_DECLARE_BIT_MASK(TS, U, 1),
RV_DBTR_DECLARE_BIT_MASK(TS, S, 1),
RV_DBTR_DECLARE_BIT_MASK(TS, VU, 1),
RV_DBTR_DECLARE_BIT_MASK(TS, VS, 1),
RV_DBTR_DECLARE_BIT_MASK(TS, HAVE_TRIG, 1),
RV_DBTR_DECLARE_BIT_MASK(TS, HW_IDX, (__riscv_xlen-9)),
};
#if __riscv_xlen == 64
#define SBI_DBTR_SHMEM_INVALID_ADDR 0xFFFFFFFFFFFFFFFFUL
#elif __riscv_xlen == 32
#define SBI_DBTR_SHMEM_INVALID_ADDR 0xFFFFFFFFUL
#else
#error "Unexpected __riscv_xlen"
#endif
struct sbi_dbtr_shmem {
unsigned long phys_lo;
unsigned long phys_hi;
};
struct sbi_dbtr_trigger {
unsigned long index;
unsigned long type_mask;
unsigned long state;
unsigned long tdata1;
unsigned long tdata2;
unsigned long tdata3;
};
struct sbi_dbtr_data_msg {
unsigned long tstate;
unsigned long tdata1;
unsigned long tdata2;
unsigned long tdata3;
};
struct sbi_dbtr_id_msg {
unsigned long idx;
};
struct sbi_dbtr_hart_triggers_state {
struct sbi_dbtr_trigger triggers[RV_MAX_TRIGGERS];
struct sbi_dbtr_shmem shmem;
u32 total_trigs;
u32 available_trigs;
u32 hartid;
u32 probed;
};
#define TDATA1_GET_TYPE(_t1) \
EXTRACT_FIELD(_t1, RV_DBTR_BIT_MASK(TDATA1, TYPE))
/* Set the hardware index of trigger in logical trigger state */
#define SET_TRIG_HW_INDEX(_state, _idx) \
do { \
_state &= ~RV_DBTR_BIT_MASK(TS, HW_IDX); \
_state |= (((unsigned long)_idx \
<< RV_DBTR_BIT(TS, HW_IDX)) \
& RV_DBTR_BIT_MASK(TS, HW_IDX)); \
}while (0);
/** SBI shared mem messages layout */
struct sbi_dbtr_shmem_entry {
struct sbi_dbtr_data_msg data;
struct sbi_dbtr_id_msg id;
};
#define SBI_DBTR_SHMEM_ALIGN_MASK ((__riscv_xlen / 8) - 1)
/** Initialize debug triggers */
int sbi_dbtr_init(struct sbi_scratch *scratch, bool coldboot);
/** SBI DBTR extension functions */
int sbi_dbtr_supported(void);
int sbi_dbtr_setup_shmem(const struct sbi_domain *dom, unsigned long smode,
unsigned long shmem_phys_lo,
unsigned long shmem_phys_hi);
int sbi_dbtr_num_trig(unsigned long trig_tdata1, unsigned long *out);
int sbi_dbtr_read_trig(unsigned long smode,
unsigned long trig_idx_base, unsigned long trig_count);
int sbi_dbtr_install_trig(unsigned long smode,
unsigned long trig_count, unsigned long *out);
int sbi_dbtr_uninstall_trig(unsigned long trig_idx_base,
unsigned long trig_idx_mask);
int sbi_dbtr_enable_trig(unsigned long trig_idx_base,
unsigned long trig_idx_mask);
int sbi_dbtr_update_trig(unsigned long smode,
unsigned long trig_idx_base,
unsigned long trig_idx_mask);
int sbi_dbtr_disable_trig(unsigned long trig_idx_base,
unsigned long trig_idx_mask);
int sbi_dbtr_get_total_triggers(void);
#endif

View File

@@ -10,8 +10,12 @@
#ifndef __SBI_DOMAIN_H__
#define __SBI_DOMAIN_H__
#include <sbi/riscv_locks.h>
#include <sbi/sbi_list.h>
#include <sbi/sbi_types.h>
#include <sbi/sbi_hartmask.h>
#include <sbi/sbi_domain_context.h>
#include <sbi/sbi_domain_data.h>
struct sbi_scratch;
@@ -156,22 +160,18 @@ struct sbi_domain_memregion {
unsigned long flags;
};
/** Maximum number of domains */
#define SBI_DOMAIN_MAX_INDEX 32
/** Representation of OpenSBI domain */
struct sbi_domain {
/**
* Logical index of this domain
* Note: This set by sbi_domain_finalize() in the coldboot path
*/
/** Node in linked list of domains */
struct sbi_dlist node;
/** Internal state of per-domain data */
struct sbi_domain_data_priv data_priv;
/** Logical index of this domain */
u32 index;
/**
* HARTs assigned to this domain
* Note: This set by sbi_domain_init() and sbi_domain_finalize()
* in the coldboot path
*/
/** HARTs assigned to this domain */
struct sbi_hartmask assigned_harts;
/** Spinlock for accessing assigned_harts */
spinlock_t assigned_harts_lock;
/** Name of this domain */
char name[64];
/** Possible HARTs in this domain */
@@ -200,20 +200,19 @@ extern struct sbi_domain root;
/** Get pointer to sbi_domain from HART index */
struct sbi_domain *sbi_hartindex_to_domain(u32 hartindex);
/** Update HART local pointer to point to specified domain */
void sbi_update_hartindex_to_domain(u32 hartindex, struct sbi_domain *dom);
/** Get pointer to sbi_domain for current HART */
#define sbi_domain_thishart_ptr() \
sbi_hartindex_to_domain(sbi_hartid_to_hartindex(current_hartid()))
sbi_hartindex_to_domain(current_hartindex())
/** Index to domain table */
extern struct sbi_domain *domidx_to_domain_table[];
/** Get pointer to sbi_domain from index */
#define sbi_index_to_domain(__index) \
domidx_to_domain_table[__index]
/** Head of linked list of domains */
extern struct sbi_dlist domain_list;
/** Iterate over each domain */
#define sbi_domain_for_each(__i, __d) \
for ((__i) = 0; ((__d) = sbi_index_to_domain(__i)); (__i)++)
#define sbi_domain_for_each(__d) \
sbi_list_for_each_entry(__d, &domain_list, node)
/** Iterate over each memory region of a domain */
#define sbi_domain_for_each_memregion(__d, __r) \
@@ -222,20 +221,19 @@ extern struct sbi_domain *domidx_to_domain_table[];
/**
* Check whether given HART is assigned to specified domain
* @param dom pointer to domain
* @param hartid the HART ID
* @param hartindex the HART index
* @return true if HART is assigned to domain otherwise false
*/
bool sbi_domain_is_assigned_hart(const struct sbi_domain *dom, u32 hartid);
bool sbi_domain_is_assigned_hart(const struct sbi_domain *dom, u32 hartindex);
/**
* Get ulong assigned HART mask for given domain and HART base ID
* Get the assigned HART mask for given domain
* @param dom pointer to domain
* @param hbase the HART base ID
* @return ulong possible HART mask
* Note: the return ulong mask will be set to zero on failure.
* @param mask the output hartmask to fill
* @return 0 on success and SBI_Exxx (< 0) on failure
*/
ulong sbi_domain_get_assigned_hartmask(const struct sbi_domain *dom,
ulong hbase);
int sbi_domain_get_assigned_hartmask(const struct sbi_domain *dom,
struct sbi_hartmask *mask);
/**
* Initialize a domain memory region based on it's physical
@@ -295,16 +293,6 @@ void sbi_domain_dump_all(const char *suffix);
int sbi_domain_register(struct sbi_domain *dom,
const struct sbi_hartmask *assign_mask);
/**
* Add a memory region to the root domain
* @param reg pointer to the memory region to be added
*
* @return 0 on success
* @return SBI_EALREADY if memory region conflicts with the existing one
* @return SBI_EINVAL otherwise
*/
int sbi_domain_root_add_memregion(const struct sbi_domain_memregion *reg);
/**
* Add a memory range with its flags to the root domain
* @param addr start physical address of memory range

View File

@@ -0,0 +1,41 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) IPADS@SJTU 2023. All rights reserved.
*/
#ifndef __SBI_DOMAIN_CONTEXT_H__
#define __SBI_DOMAIN_CONTEXT_H__
#include <sbi/sbi_types.h>
struct sbi_domain;
/**
* Enter a specific domain context synchronously
* @param dom pointer to domain
*
* @return 0 on success and negative error code on failure
*/
int sbi_domain_context_enter(struct sbi_domain *dom);
/**
* Exit the current domain context, and then return to the caller
* of sbi_domain_context_enter or attempt to start the next domain
* context to be initialized
*
* @return 0 on success and negative error code on failure
*/
int sbi_domain_context_exit(void);
/**
* Initialize domain context support
*
* @return 0 on success and negative error code on failure
*/
int sbi_domain_context_init(void);
/* Deinitialize domain context support */
void sbi_domain_context_deinit(void);
#endif // __SBI_DOMAIN_CONTEXT_H__

View File

@@ -0,0 +1,93 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Ventana Micro Systems Inc.
*/
#ifndef __SBI_DOMAIN_DATA_H__
#define __SBI_DOMAIN_DATA_H__
#include <sbi/sbi_types.h>
#include <sbi/sbi_list.h>
struct sbi_domain;
/** Maximum domain data per-domain */
#define SBI_DOMAIN_MAX_DATA_PTRS 32
/** Representation of per-domain data */
struct sbi_domain_data_priv {
/** Array of domain data pointers indexed by domain data identifier */
void *idx_to_data_ptr[SBI_DOMAIN_MAX_DATA_PTRS];
};
/** Representation of a domain data */
struct sbi_domain_data {
/**
* Head is used for maintaining data list
*
* Note: initialized by domain framework
*/
struct sbi_dlist head;
/**
* Identifier which used to locate per-domain data
*
* Note: initialized by domain framework
*/
unsigned long data_idx;
/** Size of per-domain data */
unsigned long data_size;
/** Optional callback to setup domain data */
int (*data_setup)(struct sbi_domain *dom,
struct sbi_domain_data *data, void *data_ptr);
/** Optional callback to cleanup domain data */
void (*data_cleanup)(struct sbi_domain *dom,
struct sbi_domain_data *data, void *data_ptr);
};
/**
* Get per-domain data pointer for a given domain
* @param dom pointer to domain
* @param data pointer to domain data
*
* @return per-domain data pointer
*/
void *sbi_domain_data_ptr(struct sbi_domain *dom, struct sbi_domain_data *data);
/**
* Setup all domain data for a domain
* @param dom pointer to domain
*
* @return 0 on success and negative error code on failure
*
* Note: This function is used internally within domain framework.
*/
int sbi_domain_setup_data(struct sbi_domain *dom);
/**
* Cleanup all domain data for a domain
* @param dom pointer to domain
*
* Note: This function is used internally within domain framework.
*/
void sbi_domain_cleanup_data(struct sbi_domain *dom);
/**
* Register a domain data
* @param hndl pointer to domain data
*
* @return 0 on success and negative error code on failure
*
* Note: This function must be used only in cold boot path.
*/
int sbi_domain_register_data(struct sbi_domain_data *data);
/**
* Unregister a domain data
* @param hndl pointer to domain data
*
* Note: This function must be used only in cold boot path.
*/
void sbi_domain_unregister_data(struct sbi_domain_data *data);
#endif

View File

@@ -18,7 +18,7 @@
#define SBI_OPENSBI_IMPID 1
struct sbi_trap_regs;
struct sbi_trap_info;
struct sbi_trap_context;
struct sbi_ecall_return {
/* Return flag to skip register update */
@@ -30,6 +30,8 @@ struct sbi_ecall_return {
struct sbi_ecall_extension {
/* head is used by the extension list */
struct sbi_dlist head;
/* short name of the extension */
char name[8];
/*
* extid_start and extid_end specify the range for this extension. As
* the initial range may be wider than the valid runtime range, the
@@ -38,6 +40,8 @@ struct sbi_ecall_extension {
*/
unsigned long extid_start;
unsigned long extid_end;
/* flag showing whether given extension is experimental or not */
bool experimental;
/*
* register_extensions
*
@@ -83,11 +87,13 @@ void sbi_ecall_set_impid(unsigned long impid);
struct sbi_ecall_extension *sbi_ecall_find_extension(unsigned long extid);
void sbi_ecall_get_extensions_str(char *exts_str, int exts_str_size, bool experimental);
int sbi_ecall_register_extension(struct sbi_ecall_extension *ext);
void sbi_ecall_unregister_extension(struct sbi_ecall_extension *ext);
int sbi_ecall_handler(struct sbi_trap_regs *regs);
int sbi_ecall_handler(struct sbi_trap_context *tcntx);
int sbi_ecall_init(void);

View File

@@ -12,6 +12,8 @@
/* clang-format off */
#include <sbi/sbi_types.h>
/* SBI Extension IDs */
#define SBI_EXT_0_1_SET_TIMER 0x0
#define SBI_EXT_0_1_CONSOLE_PUTCHAR 0x1
@@ -32,6 +34,10 @@
#define SBI_EXT_DBCN 0x4442434E
#define SBI_EXT_SUSP 0x53555350
#define SBI_EXT_CPPC 0x43505043
#define SBI_EXT_DBTR 0x44425452
#define SBI_EXT_SSE 0x535345
#define SBI_EXT_FWFT 0x46574654
#define SBI_EXT_MPXY 0x4D505859
/* SBI function IDs for BASE extension*/
#define SBI_EXT_BASE_GET_SPEC_VERSION 0x0
@@ -104,6 +110,44 @@
#define SBI_EXT_PMU_COUNTER_FW_READ 0x5
#define SBI_EXT_PMU_COUNTER_FW_READ_HI 0x6
#define SBI_EXT_PMU_SNAPSHOT_SET_SHMEM 0x7
#define SBI_EXT_PMU_EVENT_GET_INFO 0x8
/* SBI function IDs for DBTR extension */
#define SBI_EXT_DBTR_NUM_TRIGGERS 0x0
#define SBI_EXT_DBTR_SETUP_SHMEM 0x1
#define SBI_EXT_DBTR_TRIGGER_READ 0x2
#define SBI_EXT_DBTR_TRIGGER_INSTALL 0x3
#define SBI_EXT_DBTR_TRIGGER_UPDATE 0x4
#define SBI_EXT_DBTR_TRIGGER_UNINSTALL 0x5
#define SBI_EXT_DBTR_TRIGGER_ENABLE 0x6
#define SBI_EXT_DBTR_TRIGGER_DISABLE 0x7
/* SBI function IDs for FW feature extension */
#define SBI_EXT_FWFT_SET 0x0
#define SBI_EXT_FWFT_GET 0x1
enum sbi_fwft_feature_t {
SBI_FWFT_MISALIGNED_EXC_DELEG = 0x0,
SBI_FWFT_LANDING_PAD = 0x1,
SBI_FWFT_SHADOW_STACK = 0x2,
SBI_FWFT_DOUBLE_TRAP = 0x3,
SBI_FWFT_PTE_AD_HW_UPDATING = 0x4,
SBI_FWFT_POINTER_MASKING_PMLEN = 0x5,
SBI_FWFT_LOCAL_RESERVED_START = 0x6,
SBI_FWFT_LOCAL_RESERVED_END = 0x3fffffff,
SBI_FWFT_LOCAL_PLATFORM_START = 0x40000000,
SBI_FWFT_LOCAL_PLATFORM_END = 0x7fffffff,
SBI_FWFT_GLOBAL_RESERVED_START = 0x80000000,
SBI_FWFT_GLOBAL_RESERVED_END = 0xbfffffff,
SBI_FWFT_GLOBAL_PLATFORM_START = 0xc0000000,
SBI_FWFT_GLOBAL_PLATFORM_END = 0xffffffff,
};
#define SBI_FWFT_GLOBAL_FEATURE_BIT (1 << 31)
#define SBI_FWFT_PLATFORM_FEATURE_BIT (1 << 30)
#define SBI_FWFT_SET_FLAG_LOCK (1 << 0)
/** General pmu event codes specified in SBI PMU extension */
enum sbi_pmu_hw_generic_events_t {
@@ -205,6 +249,7 @@ enum sbi_pmu_event_type_id {
SBI_PMU_EVENT_TYPE_HW = 0x0,
SBI_PMU_EVENT_TYPE_HW_CACHE = 0x1,
SBI_PMU_EVENT_TYPE_HW_RAW = 0x2,
SBI_PMU_EVENT_TYPE_HW_RAW_V2 = 0x3,
SBI_PMU_EVENT_TYPE_FW = 0xf,
SBI_PMU_EVENT_TYPE_MAX,
};
@@ -215,12 +260,19 @@ enum sbi_pmu_ctr_type {
SBI_PMU_CTR_TYPE_FW,
};
struct sbi_pmu_event_info {
uint32_t event_idx;
uint32_t output;
uint64_t event_data;
};
/* Helper macros to decode event idx */
#define SBI_PMU_EVENT_IDX_MASK 0xFFFFF
#define SBI_PMU_EVENT_IDX_TYPE_OFFSET 16
#define SBI_PMU_EVENT_IDX_TYPE_MASK (0xF << SBI_PMU_EVENT_IDX_TYPE_OFFSET)
#define SBI_PMU_EVENT_IDX_CODE_MASK 0xFFFF
#define SBI_PMU_EVENT_RAW_IDX 0x20000
#define SBI_PMU_EVENT_RAW_V2_IDX 0x30000
#define SBI_PMU_EVENT_IDX_INVALID 0xFFFFFFFF
@@ -293,6 +345,92 @@ enum sbi_cppc_reg_id {
SBI_CPPC_NON_ACPI_LAST = SBI_CPPC_TRANSITION_LATENCY,
};
/* SBI Function IDs for SSE extension */
#define SBI_EXT_SSE_READ_ATTR 0x00000000
#define SBI_EXT_SSE_WRITE_ATTR 0x00000001
#define SBI_EXT_SSE_REGISTER 0x00000002
#define SBI_EXT_SSE_UNREGISTER 0x00000003
#define SBI_EXT_SSE_ENABLE 0x00000004
#define SBI_EXT_SSE_DISABLE 0x00000005
#define SBI_EXT_SSE_COMPLETE 0x00000006
#define SBI_EXT_SSE_INJECT 0x00000007
#define SBI_EXT_SSE_HART_UNMASK 0x00000008
#define SBI_EXT_SSE_HART_MASK 0x00000009
/* SBI SSE Event Attributes. */
enum sbi_sse_attr_id {
SBI_SSE_ATTR_STATUS = 0x00000000,
SBI_SSE_ATTR_PRIO = 0x00000001,
SBI_SSE_ATTR_CONFIG = 0x00000002,
SBI_SSE_ATTR_PREFERRED_HART = 0x00000003,
SBI_SSE_ATTR_ENTRY_PC = 0x00000004,
SBI_SSE_ATTR_ENTRY_ARG = 0x00000005,
SBI_SSE_ATTR_INTERRUPTED_SEPC = 0x00000006,
SBI_SSE_ATTR_INTERRUPTED_FLAGS = 0x00000007,
SBI_SSE_ATTR_INTERRUPTED_A6 = 0x00000008,
SBI_SSE_ATTR_INTERRUPTED_A7 = 0x00000009,
SBI_SSE_ATTR_MAX = 0x0000000A
};
#define SBI_SSE_ATTR_STATUS_STATE_OFFSET 0
#define SBI_SSE_ATTR_STATUS_STATE_MASK 0x3
#define SBI_SSE_ATTR_STATUS_PENDING_OFFSET 2
#define SBI_SSE_ATTR_STATUS_INJECT_OFFSET 3
#define SBI_SSE_ATTR_CONFIG_ONESHOT (1 << 0)
#define SBI_SSE_ATTR_INTERRUPTED_FLAGS_STATUS_SPP BIT(0)
#define SBI_SSE_ATTR_INTERRUPTED_FLAGS_STATUS_SPIE BIT(1)
#define SBI_SSE_ATTR_INTERRUPTED_FLAGS_HSTATUS_SPV BIT(2)
#define SBI_SSE_ATTR_INTERRUPTED_FLAGS_HSTATUS_SPVP BIT(3)
enum sbi_sse_state {
SBI_SSE_STATE_UNUSED = 0,
SBI_SSE_STATE_REGISTERED = 1,
SBI_SSE_STATE_ENABLED = 2,
SBI_SSE_STATE_RUNNING = 3,
};
/* SBI SSE Event IDs. */
#define SBI_SSE_EVENT_LOCAL_RAS 0x00000000
#define SBI_SSE_EVENT_LOCAL_DOUBLE_TRAP 0x00000001
#define SBI_SSE_EVENT_LOCAL_PLAT_0_START 0x00004000
#define SBI_SSE_EVENT_LOCAL_PLAT_0_END 0x00007fff
#define SBI_SSE_EVENT_GLOBAL_RAS 0x00008000
#define SBI_SSE_EVENT_GLOBAL_PLAT_0_START 0x0000c000
#define SBI_SSE_EVENT_GLOBAL_PLAT_0_END 0x0000ffff
#define SBI_SSE_EVENT_LOCAL_PMU 0x00010000
#define SBI_SSE_EVENT_LOCAL_PLAT_1_START 0x00014000
#define SBI_SSE_EVENT_LOCAL_PLAT_1_END 0x00017fff
#define SBI_SSE_EVENT_GLOBAL_PLAT_1_START 0x0001c000
#define SBI_SSE_EVENT_GLOBAL_PLAT_1_END 0x0001ffff
#define SBI_SSE_EVENT_LOCAL_PLAT_2_START 0x00024000
#define SBI_SSE_EVENT_LOCAL_PLAT_2_END 0x00027fff
#define SBI_SSE_EVENT_GLOBAL_PLAT_2_START 0x0002c000
#define SBI_SSE_EVENT_GLOBAL_PLAT_2_END 0x0002ffff
#define SBI_SSE_EVENT_LOCAL_SOFTWARE 0xffff0000
#define SBI_SSE_EVENT_LOCAL_PLAT_3_START 0xffff4000
#define SBI_SSE_EVENT_LOCAL_PLAT_3_END 0xffff7fff
#define SBI_SSE_EVENT_GLOBAL_SOFTWARE 0xffff8000
#define SBI_SSE_EVENT_GLOBAL_PLAT_3_START 0xffffc000
#define SBI_SSE_EVENT_GLOBAL_PLAT_3_END 0xffffffff
#define SBI_SSE_EVENT_GLOBAL_BIT (1 << 15)
#define SBI_SSE_EVENT_PLATFORM_BIT (1 << 14)
/* SBI function IDs for MPXY extension */
#define SBI_EXT_MPXY_SET_SHMEM 0x0
#define SBI_EXT_MPXY_GET_CHANNEL_IDS 0x1
#define SBI_EXT_MPXY_READ_ATTRS 0x2
#define SBI_EXT_MPXY_WRITE_ATTRS 0x3
#define SBI_EXT_MPXY_SEND_MSG_WITH_RESP 0x4
#define SBI_EXT_MPXY_SEND_MSG_NO_RESP 0x5
#define SBI_EXT_MPXY_GET_NOTIFICATION_EVENTS 0x6
/* SBI base specification related macros */
#define SBI_SPEC_VERSION_MAJOR_OFFSET 24
#define SBI_SPEC_VERSION_MAJOR_MASK 0x7f
@@ -313,8 +451,12 @@ enum sbi_cppc_reg_id {
#define SBI_ERR_ALREADY_STARTED -7
#define SBI_ERR_ALREADY_STOPPED -8
#define SBI_ERR_NO_SHMEM -9
#define SBI_ERR_INVALID_STATE -10
#define SBI_ERR_BAD_RANGE -11
#define SBI_ERR_TIMEOUT -12
#define SBI_ERR_IO -13
#define SBI_LAST_ERR SBI_ERR_NO_SHMEM
#define SBI_LAST_ERR SBI_ERR_BAD_RANGE
/* clang-format on */

View File

@@ -24,16 +24,19 @@
#define SBI_EALREADY_STARTED SBI_ERR_ALREADY_STARTED
#define SBI_EALREADY_STOPPED SBI_ERR_ALREADY_STOPPED
#define SBI_ENO_SHMEM SBI_ERR_NO_SHMEM
#define SBI_EINVALID_STATE SBI_ERR_INVALID_STATE
#define SBI_EBAD_RANGE SBI_ERR_BAD_RANGE
#define SBI_ETIMEOUT SBI_ERR_TIMEOUT
#define SBI_ETIMEDOUT SBI_ERR_TIMEOUT
#define SBI_EIO SBI_ERR_IO
#define SBI_ENODEV -1000
#define SBI_ENOSYS -1001
#define SBI_ETIMEDOUT -1002
#define SBI_EIO -1003
#define SBI_EILL -1004
#define SBI_ENOSPC -1005
#define SBI_ENOMEM -1006
#define SBI_EUNKNOWN -1007
#define SBI_ENOENT -1008
#define SBI_EILL -1002
#define SBI_ENOSPC -1003
#define SBI_ENOMEM -1004
#define SBI_EUNKNOWN -1005
#define SBI_ENOENT -1006
/* clang-format on */

View File

@@ -23,6 +23,18 @@ struct sbi_fifo {
u16 tail;
};
#define SBI_FIFO_INITIALIZER(__queue_mem, __entries, __entry_size) \
{ .queue = __queue_mem, \
.qlock = SPIN_LOCK_INITIALIZER, \
.num_entries = __entries, \
.entry_size = __entry_size, \
.avail = 0, \
.tail = 0, \
}
#define SBI_FIFO_DEFINE(__name, __queue_mem, __entries, __entry_size) \
struct sbi_fifo __name = SBI_FIFO_INITIALIZER(__queue_mem, __entries, __entry_size)
enum sbi_fifo_inplace_update_types {
SBI_FIFO_SKIP,
SBI_FIFO_UPDATED,
@@ -30,7 +42,7 @@ enum sbi_fifo_inplace_update_types {
};
int sbi_fifo_dequeue(struct sbi_fifo *fifo, void *data);
int sbi_fifo_enqueue(struct sbi_fifo *fifo, void *data);
int sbi_fifo_enqueue(struct sbi_fifo *fifo, void *data, bool force);
void sbi_fifo_init(struct sbi_fifo *fifo, void *queue_mem, u16 entries,
u16 entry_size);
int sbi_fifo_is_empty(struct sbi_fifo *fifo);

23
include/sbi/sbi_fwft.h Normal file
View File

@@ -0,0 +1,23 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Rivos Inc.
*
* Authors:
* Clément Léger <cleger@rivosinc.com>
*/
#ifndef __SBI_FW_FEATURE_H__
#define __SBI_FW_FEATURE_H__
#include <sbi/sbi_ecall_interface.h>
struct sbi_scratch;
int sbi_fwft_set(enum sbi_fwft_feature_t feature, unsigned long value,
unsigned long flags);
int sbi_fwft_get(enum sbi_fwft_feature_t feature, unsigned long *out_val);
int sbi_fwft_init(struct sbi_scratch *scratch, bool cold_boot);
#endif

View File

@@ -53,6 +53,28 @@ enum sbi_hart_extensions {
SBI_HART_EXT_ZICBOM,
/** Hart has Svpbmt extension */
SBI_HART_EXT_SVPBMT,
/** Hart has debug trigger extension */
SBI_HART_EXT_SDTRIG,
/** Hart has Smcsrind extension */
SBI_HART_EXT_SMCSRIND,
/** Hart has Smcdeleg extension */
SBI_HART_EXT_SMCDELEG,
/** Hart has Sscsrind extension */
SBI_HART_EXT_SSCSRIND,
/** Hart has Ssccfg extension */
SBI_HART_EXT_SSCCFG,
/** Hart has Svade extension */
SBI_HART_EXT_SVADE,
/** Hart has Svadu extension */
SBI_HART_EXT_SVADU,
/** Hart has Smnpm extension */
SBI_HART_EXT_SMNPM,
/** HART has zicfilp extension */
SBI_HART_EXT_ZICFILP,
/** HART has zicfiss extension */
SBI_HART_EXT_ZICFISS,
/** Hart has Ssdbltrp extension */
SBI_HART_EXT_SSDBLTRP,
/** Maximum index of Hart extension */
SBI_HART_EXT_MAX,

View File

@@ -127,6 +127,18 @@ static inline void sbi_hartmask_clear_all(struct sbi_hartmask *dstp)
bitmap_zero(sbi_hartmask_bits(dstp), SBI_HARTMASK_MAX_BITS);
}
/**
* *dstp = *srcp
* @param dstp the hartmask destination
* @param srcp the hartmask source
*/
static inline void sbi_hartmask_copy(struct sbi_hartmask *dstp,
const struct sbi_hartmask *srcp)
{
bitmap_copy(sbi_hartmask_bits(dstp), sbi_hartmask_bits(srcp),
SBI_HARTMASK_MAX_BITS);
}
/**
* *dstp = *src1p & *src2p
* @param dstp the hartmask result

View File

@@ -12,16 +12,41 @@
#include <sbi/sbi_types.h>
/* Opaque declaration of heap control struct */
struct sbi_heap_control;
/* Global heap control structure */
extern struct sbi_heap_control global_hpctrl;
/* Alignment of heap base address and size */
#define HEAP_BASE_ALIGN 1024
struct sbi_scratch;
/** Allocate from heap area */
void *sbi_malloc(size_t size);
void *sbi_malloc_from(struct sbi_heap_control *hpctrl, size_t size);
static inline void *sbi_malloc(size_t size)
{
return sbi_malloc_from(&global_hpctrl, size);
}
/** Allocate aligned from heap area */
void *sbi_aligned_alloc_from(struct sbi_heap_control *hpctrl,
size_t alignment,size_t size);
static inline void *sbi_aligned_alloc(size_t alignment, size_t size)
{
return sbi_aligned_alloc_from(&global_hpctrl, alignment, size);
}
/** Zero allocate from heap area */
void *sbi_zalloc(size_t size);
void *sbi_zalloc_from(struct sbi_heap_control *hpctrl, size_t size);
static inline void *sbi_zalloc(size_t size)
{
return sbi_zalloc_from(&global_hpctrl, size);
}
/** Allocate array from heap area */
static inline void *sbi_calloc(size_t nitems, size_t size)
@@ -29,19 +54,48 @@ static inline void *sbi_calloc(size_t nitems, size_t size)
return sbi_zalloc(nitems * size);
}
static inline void *sbi_calloc_from(struct sbi_heap_control *hpctrl,
size_t nitems, size_t size)
{
return sbi_zalloc_from(hpctrl, nitems * size);
}
/** Free-up to heap area */
void sbi_free(void *ptr);
void sbi_free_from(struct sbi_heap_control *hpctrl, void *ptr);
static inline void sbi_free(void *ptr)
{
return sbi_free_from(&global_hpctrl, ptr);
}
/** Amount (in bytes) of free space in the heap area */
unsigned long sbi_heap_free_space(void);
unsigned long sbi_heap_free_space_from(struct sbi_heap_control *hpctrl);
static inline unsigned long sbi_heap_free_space(void)
{
return sbi_heap_free_space_from(&global_hpctrl);
}
/** Amount (in bytes) of used space in the heap area */
unsigned long sbi_heap_used_space(void);
unsigned long sbi_heap_used_space_from(struct sbi_heap_control *hpctrl);
static inline unsigned long sbi_heap_used_space(void)
{
return sbi_heap_used_space_from(&global_hpctrl);
}
/** Amount (in bytes) of reserved space in the heap area */
unsigned long sbi_heap_reserved_space(void);
unsigned long sbi_heap_reserved_space_from(struct sbi_heap_control *hpctrl);
static inline unsigned long sbi_heap_reserved_space(void)
{
return sbi_heap_reserved_space_from(&global_hpctrl);
}
/** Initialize heap area */
int sbi_heap_init(struct sbi_scratch *scratch);
int sbi_heap_init_new(struct sbi_heap_control *hpctrl, unsigned long base,
unsigned long size);
int sbi_heap_alloc_new(struct sbi_heap_control **hpctrl);
#endif

View File

@@ -10,6 +10,7 @@
#ifndef __SBI_HSM_H__
#define __SBI_HSM_H__
#include <sbi/sbi_hartmask.h>
#include <sbi/sbi_types.h>
/** Hart state managment device */
@@ -39,8 +40,12 @@ struct sbi_hsm_device {
*
* For successful non-retentive suspend, the hart will resume from
* the warm boot entry point.
*
* NOTE: mmode_resume_addr(resume address) is optional hence it
* may or may not be honored by the platform. If its not honored
* then platform must ensure to resume from the warmboot address.
*/
int (*hart_suspend)(u32 suspend_type);
int (*hart_suspend)(u32 suspend_type, ulong mmode_resume_addr);
/**
* Perform platform-specific actions to resume from a suspended state.
@@ -58,7 +63,7 @@ const struct sbi_hsm_device *sbi_hsm_get_device(void);
void sbi_hsm_set_device(const struct sbi_hsm_device *dev);
int sbi_hsm_init(struct sbi_scratch *scratch, u32 hartid, bool cold_boot);
int sbi_hsm_init(struct sbi_scratch *scratch, bool cold_boot);
void __noreturn sbi_hsm_exit(struct sbi_scratch *scratch);
int sbi_hsm_hart_start(struct sbi_scratch *scratch,
@@ -72,10 +77,10 @@ int sbi_hsm_hart_suspend(struct sbi_scratch *scratch, u32 suspend_type,
ulong raddr, ulong rmode, ulong arg1);
bool sbi_hsm_hart_change_state(struct sbi_scratch *scratch, long oldstate,
long newstate);
int __sbi_hsm_hart_get_state(u32 hartid);
int __sbi_hsm_hart_get_state(u32 hartindex);
int sbi_hsm_hart_get_state(const struct sbi_domain *dom, u32 hartid);
int sbi_hsm_hart_interruptible_mask(const struct sbi_domain *dom,
ulong hbase, ulong *out_hmask);
struct sbi_hartmask *mask);
void __sbi_hsm_suspend_non_ret_save(struct sbi_scratch *scratch);
void __noreturn sbi_hsm_hart_start_finish(struct sbi_scratch *scratch,
u32 hartid);

View File

@@ -12,8 +12,8 @@
#include <sbi/sbi_types.h>
struct sbi_trap_regs;
struct sbi_trap_context;
int sbi_illegal_insn_handler(ulong insn, struct sbi_trap_regs *regs);
int sbi_illegal_insn_handler(struct sbi_trap_context *tcntx);
#endif

View File

@@ -16,9 +16,9 @@ struct sbi_scratch;
void __noreturn sbi_init(struct sbi_scratch *scratch);
unsigned long sbi_entry_count(u32 hartid);
unsigned long sbi_entry_count(u32 hartindex);
unsigned long sbi_init_count(u32 hartid);
unsigned long sbi_init_count(u32 hartindex);
void __noreturn sbi_exit(struct sbi_scratch *scratch);

View File

@@ -26,8 +26,8 @@ struct sbi_ipi_device {
/** Send IPI to a target HART index */
void (*ipi_send)(u32 hart_index);
/** Clear IPI for a target HART index */
void (*ipi_clear)(u32 hart_index);
/** Clear IPI for the current hart */
void (*ipi_clear)(void);
};
enum sbi_ipi_update_type {
@@ -87,7 +87,7 @@ void sbi_ipi_process(void);
int sbi_ipi_raw_send(u32 hartindex);
void sbi_ipi_raw_clear(u32 hartindex);
void sbi_ipi_raw_clear(void);
const struct sbi_ipi_device *sbi_ipi_get_device(void);

View File

@@ -10,20 +10,22 @@
#ifndef __SBI_IRQCHIP_H__
#define __SBI_IRQCHIP_H__
#include <sbi/sbi_list.h>
#include <sbi/sbi_types.h>
struct sbi_scratch;
struct sbi_trap_regs;
/**
* Set external interrupt handling function
*
* This function is called by OpenSBI platform code to set a handler for
* external interrupts
*
* @param fn function pointer for handling external irqs
*/
void sbi_irqchip_set_irqfn(int (*fn)(struct sbi_trap_regs *regs));
/** irqchip hardware device */
struct sbi_irqchip_device {
/** Node in the list of irqchip devices */
struct sbi_dlist node;
/** Initialize per-hart state for the current hart */
int (*warm_init)(struct sbi_irqchip_device *dev);
/** Handle an IRQ from this irqchip */
int (*irq_handle)(void);
};
/**
* Process external interrupts
@@ -33,7 +35,10 @@ void sbi_irqchip_set_irqfn(int (*fn)(struct sbi_trap_regs *regs));
*
* @param regs pointer for trap registers
*/
int sbi_irqchip_process(struct sbi_trap_regs *regs);
int sbi_irqchip_process(void);
/** Register an irqchip device to receive callbacks */
void sbi_irqchip_add_device(struct sbi_irqchip_device *dev);
/** Initialize interrupt controllers */
int sbi_irqchip_init(struct sbi_scratch *scratch, bool cold_boot);

View File

@@ -1,23 +0,0 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2019 Western Digital Corporation or its affiliates.
*
* Authors:
* Anup Patel <anup.patel@wdc.com>
*/
#ifndef __SBI_MISALIGNED_LDST_H__
#define __SBI_MISALIGNED_LDST_H__
#include <sbi/sbi_types.h>
struct sbi_trap_regs;
int sbi_misaligned_load_handler(ulong addr, ulong tval2, ulong tinst,
struct sbi_trap_regs *regs);
int sbi_misaligned_store_handler(ulong addr, ulong tval2, ulong tinst,
struct sbi_trap_regs *regs);
#endif

183
include/sbi/sbi_mpxy.h Normal file
View File

@@ -0,0 +1,183 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Ventana Micro Systems Inc.
*
* Authors:
* Rahul Pathak <rpathak@ventanamicro.com>
*/
#ifndef __SBI_MPXY_H__
#define __SBI_MPXY_H__
#include <sbi/sbi_list.h>
struct sbi_scratch;
#define SBI_MPXY_MSGPROTO_VERSION(Major, Minor) ((Major << 16) | Minor)
enum sbi_mpxy_attr_id {
/* Standard channel attributes managed by MPXY framework */
SBI_MPXY_ATTR_MSG_PROT_ID = 0x00000000,
SBI_MPXY_ATTR_MSG_PROT_VER = 0x00000001,
SBI_MPXY_ATTR_MSG_MAX_LEN = 0x00000002,
SBI_MPXY_ATTR_MSG_SEND_TIMEOUT = 0x00000003,
SBI_MPXY_ATTR_MSG_COMPLETION_TIMEOUT = 0x00000004,
SBI_MPXY_ATTR_CHANNEL_CAPABILITY = 0x00000005,
SBI_MPXY_ATTR_SSE_EVENT_ID = 0x00000006,
SBI_MPXY_ATTR_MSI_CONTROL = 0x00000007,
SBI_MPXY_ATTR_MSI_ADDR_LO = 0x00000008,
SBI_MPXY_ATTR_MSI_ADDR_HI = 0x00000009,
SBI_MPXY_ATTR_MSI_DATA = 0x0000000A,
SBI_MPXY_ATTR_EVENTS_STATE_CONTROL = 0x0000000B,
SBI_MPXY_ATTR_STD_ATTR_MAX_IDX,
/* Message protocol specific attributes, managed by
* message protocol driver */
SBI_MPXY_ATTR_MSGPROTO_ATTR_START = 0x80000000,
SBI_MPXY_ATTR_MSGPROTO_ATTR_END = 0xffffffff
};
/**
* SBI MPXY Message Protocol IDs
*/
enum sbi_mpxy_msgproto_id {
SBI_MPXY_MSGPROTO_RPMI_ID = 0x00000000,
SBI_MPXY_MSGPROTO_MAX_IDX,
/** Vendor specific message protocol IDs */
SBI_MPXY_MSGPROTO_VENDOR_START = 0x80000000,
SBI_MPXY_MSGPROTO_VENDOR_END = 0xffffffff
};
enum SBI_EXT_MPXY_SHMEM_FLAGS {
SBI_EXT_MPXY_SHMEM_FLAG_OVERWRITE = 0b00,
SBI_EXT_MPXY_SHMEM_FLAG_OVERWRITE_RETURN = 0b01,
SBI_EXT_MPXY_SHMEM_FLAG_MAX_IDX
};
struct sbi_mpxy_msi_info {
/* MSI target address low 32-bit */
u32 msi_addr_lo;
/* MSI target address high 32-bit */
u32 msi_addr_hi;
/* MSI data */
u32 msi_data;
};
/**
* Channel attributes.
* NOTE: The sequence of attribute fields are as per the
* defined sequence in the attribute table in spec(or as
* per the enum sbi_mpxy_attr_id).
*/
struct sbi_mpxy_channel_attrs {
/* Message protocol ID */
u32 msg_proto_id;
/* Message protocol Version */
u32 msg_proto_version;
/* Message protocol maximum message data length(bytes) */
u32 msg_data_maxlen;
/* Message protocol message send timeout
* in microseconds */
u32 msg_send_timeout;
/* Message protocol message response timeout in
* microseconds. Its the aggregate of msg_send_timeout
* and the timeout in receiving the response */
u32 msg_completion_timeout;
/* Bit array for channel capabilities */
u32 capability;
u32 sse_event_id;
u32 msi_control;
struct sbi_mpxy_msi_info msi_info;
/* Events State Control */
u32 eventsstate_ctrl;
};
/** A Message proxy channel accessible through SBI interface */
struct sbi_mpxy_channel {
/** List head to a set of channels */
struct sbi_dlist head;
u32 channel_id;
struct sbi_mpxy_channel_attrs attrs;
/**
* Read message protocol attributes
* NOTE: inmem requires little-endian byte-ordering
*/
int (*read_attributes)(struct sbi_mpxy_channel *channel,
u32 *outmem,
u32 base_attr_id,
u32 attr_count);
/**
* Write message protocol attributes
* NOTE: outmem requires little-endian byte-ordering
*/
int (*write_attributes)(struct sbi_mpxy_channel *channel,
u32 *inmem,
u32 base_attr_id,
u32 attr_count);
/**
* Send a message and wait for response
* NOTE: msgbuf requires little-endian byte-ordering
*/
int (*send_message_with_response)(struct sbi_mpxy_channel *channel,
u32 msg_id, void *msgbuf, u32 msg_len,
void *respbuf, u32 resp_max_len,
unsigned long *resp_len);
/** Send message without response */
int (*send_message_without_response)(struct sbi_mpxy_channel *channel,
u32 msg_id, void *msgbuf, u32 msg_len);
/**
* Get notifications events if supported on a channel
* NOTE: eventsbuf requires little-endian byte-ordering
*/
int (*get_notification_events)(struct sbi_mpxy_channel *channel,
void *eventsbuf, u32 bufsize,
unsigned long *events_len);
/**
* Callback to enable the events state reporting
* in the message protocol implementation
*/
void (*switch_eventsstate)(u32 enable);
};
/** Register a Message proxy channel */
int sbi_mpxy_register_channel(struct sbi_mpxy_channel *channel);
/** Initialize Message proxy subsystem */
int sbi_mpxy_init(struct sbi_scratch *scratch);
/** Check if some Message proxy channel is available */
bool sbi_mpxy_channel_available(void);
/** Set Message proxy shared memory on the calling HART */
int sbi_mpxy_set_shmem(unsigned long shmem_size,
unsigned long shmem_phys_lo,
unsigned long shmem_phys_hi,
unsigned long flags);
/** Get channel IDs list */
int sbi_mpxy_get_channel_ids(u32 start_index);
/** Read MPXY channel attributes */
int sbi_mpxy_read_attrs(u32 channel_id, u32 base_attr_id, u32 attr_count);
/** Write MPXY channel attributes */
int sbi_mpxy_write_attrs(u32 channel_id, u32 base_attr_id, u32 attr_count);
/**
* Send a message over a MPXY channel.
* In case if response is not expected, resp_data_len will be NULL.
*/
int sbi_mpxy_send_message(u32 channel_id, u8 msg_id,
unsigned long msg_data_len,
unsigned long *resp_data_len);
/** Get Message proxy notification events */
int sbi_mpxy_get_notification_events(u32 channel_id,
unsigned long *events_len);
#endif

View File

@@ -48,11 +48,13 @@
#include <sbi/sbi_error.h>
#include <sbi/sbi_scratch.h>
#include <sbi/sbi_version.h>
#include <sbi/sbi_trap_ldst.h>
struct sbi_domain_memregion;
struct sbi_ecall_return;
struct sbi_trap_regs;
struct sbi_hart_features;
union sbi_ldst_data;
/** Possible feature flags of a platform */
enum sbi_platform_features {
@@ -109,18 +111,11 @@ struct sbi_platform_operations {
/** Get platform specific mhpmevent value */
uint64_t (*pmu_xlate_to_mhpmevent)(uint32_t event_idx, uint64_t data);
/** Initialize the platform console */
int (*console_init)(void);
/** Initialize the platform interrupt controller during cold boot */
int (*irqchip_init)(void);
/** Initialize the platform interrupt controller for current HART */
int (*irqchip_init)(bool cold_boot);
/** Exit the platform interrupt controller for current HART */
void (*irqchip_exit)(void);
/** Initialize IPI for current HART */
int (*ipi_init)(bool cold_boot);
/** Exit IPI for current HART */
void (*ipi_exit)(void);
/** Initialize IPI during cold boot */
int (*ipi_init)(void);
/** Get tlb flush limit value **/
u64 (*get_tlbr_flush_limit)(void);
@@ -128,10 +123,11 @@ struct sbi_platform_operations {
/** Get tlb fifo num entries*/
u32 (*get_tlb_num_entries)(void);
/** Initialize platform timer for current HART */
int (*timer_init)(bool cold_boot);
/** Exit platform timer for current HART */
void (*timer_exit)(void);
/** Initialize platform timer during cold boot */
int (*timer_init)(void);
/** Initialize the platform Message Proxy(MPXY) driver */
int (*mpxy_init)(void);
/** Check if SBI vendor extension is implemented or not */
bool (*vendor_ext_check)(void);
@@ -139,6 +135,13 @@ struct sbi_platform_operations {
int (*vendor_ext_provider)(long funcid,
struct sbi_trap_regs *regs,
struct sbi_ecall_return *out);
/** platform specific handler to fixup load fault */
int (*emulate_load)(int rlen, unsigned long addr,
union sbi_ldst_data *out_val);
/** platform specific handler to fixup store fault */
int (*emulate_store)(int wlen, unsigned long addr,
union sbi_ldst_data in_val);
};
/** Platform default per-HART stack size for exception/interrupt handling */
@@ -146,7 +149,7 @@ struct sbi_platform_operations {
/** Platform default heap size */
#define SBI_PLATFORM_DEFAULT_HEAP_SIZE(__num_hart) \
(0x8000 + 0x800 * (__num_hart))
(0x8000 + 0x1000 * (__num_hart))
/** Representation of a platform */
struct sbi_platform {
@@ -541,98 +544,59 @@ static inline uint64_t sbi_platform_pmu_xlate_to_mhpmevent(const struct sbi_plat
}
/**
* Initialize the platform console
* Initialize the platform interrupt controller during cold boot
*
* @param plat pointer to struct sbi_platform
*
* @return 0 on success and negative error code on failure
*/
static inline int sbi_platform_console_init(const struct sbi_platform *plat)
{
if (plat && sbi_platform_ops(plat)->console_init)
return sbi_platform_ops(plat)->console_init();
return 0;
}
/**
* Initialize the platform interrupt controller for current HART
*
* @param plat pointer to struct sbi_platform
* @param cold_boot whether cold boot (true) or warm_boot (false)
*
* @return 0 on success and negative error code on failure
*/
static inline int sbi_platform_irqchip_init(const struct sbi_platform *plat,
bool cold_boot)
static inline int sbi_platform_irqchip_init(const struct sbi_platform *plat)
{
if (plat && sbi_platform_ops(plat)->irqchip_init)
return sbi_platform_ops(plat)->irqchip_init(cold_boot);
return sbi_platform_ops(plat)->irqchip_init();
return 0;
}
/**
* Exit the platform interrupt controller for current HART
* Initialize the platform IPI support during cold boot
*
* @param plat pointer to struct sbi_platform
*/
static inline void sbi_platform_irqchip_exit(const struct sbi_platform *plat)
{
if (plat && sbi_platform_ops(plat)->irqchip_exit)
sbi_platform_ops(plat)->irqchip_exit();
}
/**
* Initialize the platform IPI support for current HART
*
* @param plat pointer to struct sbi_platform
* @param cold_boot whether cold boot (true) or warm_boot (false)
*
* @return 0 on success and negative error code on failure
*/
static inline int sbi_platform_ipi_init(const struct sbi_platform *plat,
bool cold_boot)
static inline int sbi_platform_ipi_init(const struct sbi_platform *plat)
{
if (plat && sbi_platform_ops(plat)->ipi_init)
return sbi_platform_ops(plat)->ipi_init(cold_boot);
return sbi_platform_ops(plat)->ipi_init();
return 0;
}
/**
* Exit the platform IPI support for current HART
* Initialize the platform timer during cold boot
*
* @param plat pointer to struct sbi_platform
*/
static inline void sbi_platform_ipi_exit(const struct sbi_platform *plat)
{
if (plat && sbi_platform_ops(plat)->ipi_exit)
sbi_platform_ops(plat)->ipi_exit();
}
/**
* Initialize the platform timer for current HART
*
* @param plat pointer to struct sbi_platform
* @param cold_boot whether cold boot (true) or warm_boot (false)
*
* @return 0 on success and negative error code on failure
*/
static inline int sbi_platform_timer_init(const struct sbi_platform *plat,
bool cold_boot)
static inline int sbi_platform_timer_init(const struct sbi_platform *plat)
{
if (plat && sbi_platform_ops(plat)->timer_init)
return sbi_platform_ops(plat)->timer_init(cold_boot);
return sbi_platform_ops(plat)->timer_init();
return 0;
}
/**
* Exit the platform timer for current HART
* Initialize the platform Message Proxy drivers
*
* @param plat pointer to struct sbi_platform
*
* @return 0 on success and negative error code on failure
*/
static inline void sbi_platform_timer_exit(const struct sbi_platform *plat)
static inline int sbi_platform_mpxy_init(const struct sbi_platform *plat)
{
if (plat && sbi_platform_ops(plat)->timer_exit)
sbi_platform_ops(plat)->timer_exit();
if (plat && sbi_platform_ops(plat)->mpxy_init)
return sbi_platform_ops(plat)->mpxy_init();
return 0;
}
/**
@@ -675,6 +639,50 @@ static inline int sbi_platform_vendor_ext_provider(
return SBI_ENOTSUPP;
}
/**
* Ask platform to emulate the trapped load
*
* @param plat pointer to struct sbi_platform
* @param rlen length of the load: 1/2/4/8...
* @param addr virtual address of the load. Platform needs to page-walk and
* find the physical address if necessary
* @param out_val value loaded
*
* @return 0 on success and negative error code on failure
*/
static inline int sbi_platform_emulate_load(const struct sbi_platform *plat,
int rlen, unsigned long addr,
union sbi_ldst_data *out_val)
{
if (plat && sbi_platform_ops(plat)->emulate_load) {
return sbi_platform_ops(plat)->emulate_load(rlen, addr,
out_val);
}
return SBI_ENOTSUPP;
}
/**
* Ask platform to emulate the trapped store
*
* @param plat pointer to struct sbi_platform
* @param wlen length of the store: 1/2/4/8...
* @param addr virtual address of the store. Platform needs to page-walk and
* find the physical address if necessary
* @param in_val value to store
*
* @return 0 on success and negative error code on failure
*/
static inline int sbi_platform_emulate_store(const struct sbi_platform *plat,
int wlen, unsigned long addr,
union sbi_ldst_data in_val)
{
if (plat && sbi_platform_ops(plat)->emulate_store) {
return sbi_platform_ops(plat)->emulate_store(wlen, addr,
in_val);
}
return SBI_ENOTSUPP;
}
#endif
#endif

View File

@@ -11,6 +11,7 @@
#define __SBI_PMU_H__
#include <sbi/sbi_types.h>
#include <sbi/sbi_trap.h>
struct sbi_scratch;
@@ -141,6 +142,8 @@ int sbi_pmu_ctr_start(unsigned long cidx_base, unsigned long cidx_mask,
unsigned long flags, uint64_t ival);
int sbi_pmu_ctr_get_info(uint32_t cidx, unsigned long *ctr_info);
int sbi_pmu_event_get_info(unsigned long shmem_lo, unsigned long shmem_high,
unsigned long num_events, unsigned long flags);
unsigned long sbi_pmu_num_ctr(void);
@@ -150,4 +153,6 @@ int sbi_pmu_ctr_cfg_match(unsigned long cidx_base, unsigned long cidx_mask,
int sbi_pmu_ctr_incr_fw(enum sbi_pmu_fw_event_code_id fw_id);
void sbi_pmu_ovf_irq();
#endif

View File

@@ -22,7 +22,7 @@
#define SBI_SCRATCH_FW_RW_OFFSET (2 * __SIZEOF_POINTER__)
/** Offset of fw_heap_offset member in sbi_scratch */
#define SBI_SCRATCH_FW_HEAP_OFFSET (3 * __SIZEOF_POINTER__)
/** Offset of fw_heap_size_offset member in sbi_scratch */
/** Offset of fw_heap_size member in sbi_scratch */
#define SBI_SCRATCH_FW_HEAP_SIZE_OFFSET (4 * __SIZEOF_POINTER__)
/** Offset of next_arg1 member in sbi_scratch */
#define SBI_SCRATCH_NEXT_ARG1_OFFSET (5 * __SIZEOF_POINTER__)
@@ -36,14 +36,16 @@
#define SBI_SCRATCH_PLATFORM_ADDR_OFFSET (9 * __SIZEOF_POINTER__)
/** Offset of hartid_to_scratch member in sbi_scratch */
#define SBI_SCRATCH_HARTID_TO_SCRATCH_OFFSET (10 * __SIZEOF_POINTER__)
/** Offset of trap_exit member in sbi_scratch */
#define SBI_SCRATCH_TRAP_EXIT_OFFSET (11 * __SIZEOF_POINTER__)
/** Offset of trap_context member in sbi_scratch */
#define SBI_SCRATCH_TRAP_CONTEXT_OFFSET (11 * __SIZEOF_POINTER__)
/** Offset of tmp0 member in sbi_scratch */
#define SBI_SCRATCH_TMP0_OFFSET (12 * __SIZEOF_POINTER__)
/** Offset of options member in sbi_scratch */
#define SBI_SCRATCH_OPTIONS_OFFSET (13 * __SIZEOF_POINTER__)
/** Offset of hartindex member in sbi_scratch */
#define SBI_SCRATCH_HARTINDEX_OFFSET (14 * __SIZEOF_POINTER__)
/** Offset of extra space in sbi_scratch */
#define SBI_SCRATCH_EXTRA_SPACE_OFFSET (14 * __SIZEOF_POINTER__)
#define SBI_SCRATCH_EXTRA_SPACE_OFFSET (15 * __SIZEOF_POINTER__)
/** Maximum size of sbi_scratch (4KB) */
#define SBI_SCRATCH_SIZE (0x1000)
@@ -77,12 +79,14 @@ struct sbi_scratch {
unsigned long platform_addr;
/** Address of HART ID to sbi_scratch conversion function */
unsigned long hartid_to_scratch;
/** Address of trap exit function */
unsigned long trap_exit;
/** Address of current trap context */
unsigned long trap_context;
/** Temporary storage */
unsigned long tmp0;
/** Options for OpenSBI library */
unsigned long options;
/** Index of the hart */
unsigned long hartindex;
};
/**
@@ -130,10 +134,10 @@ _Static_assert(
"struct sbi_scratch definition has changed, please redefine "
"SBI_SCRATCH_HARTID_TO_SCRATCH_OFFSET");
_Static_assert(
offsetof(struct sbi_scratch, trap_exit)
== SBI_SCRATCH_TRAP_EXIT_OFFSET,
offsetof(struct sbi_scratch, trap_context)
== SBI_SCRATCH_TRAP_CONTEXT_OFFSET,
"struct sbi_scratch definition has changed, please redefine "
"SBI_SCRATCH_TRAP_EXIT_OFFSET");
"SBI_SCRATCH_TRAP_CONTEXT_OFFSET");
_Static_assert(
offsetof(struct sbi_scratch, tmp0)
== SBI_SCRATCH_TMP0_OFFSET,
@@ -155,7 +159,7 @@ enum sbi_scratch_options {
/** Get pointer to sbi_scratch for current HART */
#define sbi_scratch_thishart_ptr() \
((struct sbi_scratch *)csr_read(CSR_MSCRATCH))
((struct sbi_scratch *)csr_read_relaxed(CSR_MSCRATCH))
/** Get Arg1 of next booting stage for current HART */
#define sbi_scratch_thishart_arg1_ptr() \
@@ -202,6 +206,10 @@ do { \
= (__type)(__ptr); \
} while (0)
/** Get the hart index of the current hart */
#define current_hartindex() \
(sbi_scratch_thishart_ptr()->hartindex)
/** Last HART index having a sbi_scratch pointer */
extern u32 last_hartindex_having_scratch;

95
include/sbi/sbi_sse.h Normal file
View File

@@ -0,0 +1,95 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2023 Rivos Systems.
*/
#ifndef __SBI_SSE_H__
#define __SBI_SSE_H__
#include <sbi/sbi_types.h>
#include <sbi/sbi_list.h>
#include <sbi/riscv_locks.h>
struct sbi_scratch;
struct sbi_trap_regs;
struct sbi_ecall_return;
#define EXC_MODE_PP_SHIFT 0
#define EXC_MODE_PP BIT(EXC_MODE_PP_SHIFT)
#define EXC_MODE_PV_SHIFT 1
#define EXC_MODE_PV BIT(EXC_MODE_PV_SHIFT)
#define EXC_MODE_SSTATUS_SPIE_SHIFT 2
#define EXC_MODE_SSTATUS_SPIE BIT(EXC_MODE_SSTATUS_SPIE_SHIFT)
struct sbi_sse_cb_ops {
/**
* Called when hart_id is changed on the event.
*/
void (*set_hartid_cb)(uint32_t event_id, unsigned long hart_id);
/**
* Called when the SBI_EXT_SSE_COMPLETE is invoked on the event.
*/
void (*complete_cb)(uint32_t event_id);
/**
* Called when the SBI_EXT_SSE_REGISTER is invoked on the event.
*/
void (*register_cb)(uint32_t event_id);
/**
* Called when the SBI_EXT_SSE_UNREGISTER is invoked on the event.
*/
void (*unregister_cb)(uint32_t event_id);
/**
* Called when the SBI_EXT_SSE_ENABLE is invoked on the event.
*/
void (*enable_cb)(uint32_t event_id);
/**
* Called when the SBI_EXT_SSE_DISABLE is invoked on the event.
*/
void (*disable_cb)(uint32_t event_id);
};
/* Set the callback operations for an event
* @param event_id Event identifier (SBI_SSE_EVENT_*)
* @param cb_ops Callback operations
* @return 0 on success, error otherwise
*/
int sbi_sse_set_cb_ops(uint32_t event_id, const struct sbi_sse_cb_ops *cb_ops);
/* Inject an event to the current hard
* @param event_id Event identifier (SBI_SSE_EVENT_*)
* @param regs Registers that were used on SBI entry
* @return 0 on success, error otherwise
*/
int sbi_sse_inject_event(uint32_t event_id);
void sbi_sse_process_pending_events(struct sbi_trap_regs *regs);
int sbi_sse_init(struct sbi_scratch *scratch, bool cold_boot);
void sbi_sse_exit(struct sbi_scratch *scratch);
/* Interface called from sbi_ecall_sse.c */
int sbi_sse_register(uint32_t event_id, unsigned long handler_entry_pc,
unsigned long handler_entry_arg);
int sbi_sse_unregister(uint32_t event_id);
int sbi_sse_hart_mask(void);
int sbi_sse_hart_unmask(void);
int sbi_sse_enable(uint32_t event_id);
int sbi_sse_disable(uint32_t event_id);
int sbi_sse_complete(struct sbi_trap_regs *regs, struct sbi_ecall_return *out);
int sbi_sse_inject_from_ecall(uint32_t event_id, unsigned long hart_id,
struct sbi_ecall_return *out);
int sbi_sse_read_attrs(uint32_t event_id, uint32_t base_attr_id,
uint32_t attr_count, unsigned long output_phys_lo,
unsigned long output_phys_hi);
int sbi_sse_write_attrs(uint32_t event_id, uint32_t base_attr_id,
uint32_t attr_count, unsigned long input_phys_lo,
unsigned long input_phys_hi);
#endif

View File

@@ -28,6 +28,9 @@ struct sbi_timer_device {
/** Stop timer event for current HART */
void (*timer_event_stop)(void);
/** Initialize timer device for current HART */
int (*warm_init)(void);
};
struct sbi_scratch;
@@ -78,8 +81,10 @@ u64 sbi_timer_get_delta(void);
/** Set timer delta value for current HART */
void sbi_timer_set_delta(ulong delta);
#if __riscv_xlen == 32
/** Set upper 32-bits of timer delta value for current HART */
void sbi_timer_set_delta_upper(ulong delta_upper);
#endif
/** Start timer event for current HART */
void sbi_timer_event_start(u64 next_event);

View File

@@ -87,20 +87,18 @@
/** Last member index in sbi_trap_regs */
#define SBI_TRAP_REGS_last 35
/** Index of epc member in sbi_trap_info */
#define SBI_TRAP_INFO_epc 0
/** Index of cause member in sbi_trap_info */
#define SBI_TRAP_INFO_cause 1
#define SBI_TRAP_INFO_cause 0
/** Index of tval member in sbi_trap_info */
#define SBI_TRAP_INFO_tval 2
#define SBI_TRAP_INFO_tval 1
/** Index of tval2 member in sbi_trap_info */
#define SBI_TRAP_INFO_tval2 3
#define SBI_TRAP_INFO_tval2 2
/** Index of tinst member in sbi_trap_info */
#define SBI_TRAP_INFO_tinst 4
#define SBI_TRAP_INFO_tinst 3
/** Index of gva member in sbi_trap_info */
#define SBI_TRAP_INFO_gva 5
#define SBI_TRAP_INFO_gva 4
/** Last member index in sbi_trap_info */
#define SBI_TRAP_INFO_last 6
#define SBI_TRAP_INFO_last 5
/* clang-format on */
@@ -114,9 +112,15 @@
/** Size (in bytes) of sbi_trap_info */
#define SBI_TRAP_INFO_SIZE SBI_TRAP_INFO_OFFSET(last)
/** Size (in bytes) of sbi_trap_context */
#define SBI_TRAP_CONTEXT_SIZE (SBI_TRAP_REGS_SIZE + \
SBI_TRAP_INFO_SIZE + \
__SIZEOF_POINTER__)
#ifndef __ASSEMBLER__
#include <sbi/sbi_types.h>
#include <sbi/sbi_scratch.h>
/** Representation of register state at time of trap/interrupt */
struct sbi_trap_regs {
@@ -194,8 +198,6 @@ struct sbi_trap_regs {
/** Representation of trap details */
struct sbi_trap_info {
/** epc Trap program counter */
unsigned long epc;
/** cause Trap exception cause */
unsigned long cause;
/** tval Trap value */
@@ -208,6 +210,16 @@ struct sbi_trap_info {
unsigned long gva;
};
/** Representation of trap context saved on stack */
struct sbi_trap_context {
/** Register state */
struct sbi_trap_regs regs;
/** Trap details */
struct sbi_trap_info trap;
/** Pointer to previous trap context */
struct sbi_trap_context *prev_context;
};
static inline unsigned long sbi_regs_gva(const struct sbi_trap_regs *regs)
{
/*
@@ -224,12 +236,35 @@ static inline unsigned long sbi_regs_gva(const struct sbi_trap_regs *regs)
#endif
}
static inline bool sbi_regs_from_virt(const struct sbi_trap_regs *regs)
{
#if __riscv_xlen == 32
return (regs->mstatusH & MSTATUSH_MPV) ? true : false;
#else
return (regs->mstatus & MSTATUS_MPV) ? true : false;
#endif
}
static inline int sbi_mstatus_prev_mode(unsigned long mstatus)
{
return (mstatus & MSTATUS_MPP) >> MSTATUS_MPP_SHIFT;
}
int sbi_trap_redirect(struct sbi_trap_regs *regs,
struct sbi_trap_info *trap);
const struct sbi_trap_info *trap);
struct sbi_trap_regs *sbi_trap_handler(struct sbi_trap_regs *regs);
static inline struct sbi_trap_context *sbi_trap_get_context(struct sbi_scratch *scratch)
{
return (scratch) ? (void *)scratch->trap_context : NULL;
}
void __noreturn sbi_trap_exit(const struct sbi_trap_regs *regs);
static inline void sbi_trap_set_context(struct sbi_scratch *scratch,
struct sbi_trap_context *tcntx)
{
scratch->trap_context = (unsigned long)tcntx;
}
struct sbi_trap_context *sbi_trap_handler(struct sbi_trap_context *tcntx);
#endif

View File

@@ -0,0 +1,42 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2019 Western Digital Corporation or its affiliates.
*
* Authors:
* Anup Patel <anup.patel@wdc.com>
*/
#ifndef __SBI_TRAP_LDST_H__
#define __SBI_TRAP_LDST_H__
#include <sbi/sbi_types.h>
#include <sbi/sbi_trap.h>
union sbi_ldst_data {
u64 data_u64;
u32 data_u32;
u8 data_bytes[8];
ulong data_ulong;
};
int sbi_misaligned_load_handler(struct sbi_trap_context *tcntx);
int sbi_misaligned_store_handler(struct sbi_trap_context *tcntx);
int sbi_load_access_handler(struct sbi_trap_context *tcntx);
int sbi_store_access_handler(struct sbi_trap_context *tcntx);
int sbi_double_trap_handler(struct sbi_trap_context *tcntx);
ulong sbi_misaligned_tinst_fixup(ulong orig_tinst, ulong new_tinst,
ulong addr_offset);
int sbi_misaligned_v_ld_emulator(int rlen, union sbi_ldst_data *out_val,
struct sbi_trap_context *tcntx);
int sbi_misaligned_v_st_emulator(int wlen, union sbi_ldst_data in_val,
struct sbi_trap_context *tcntx);
#endif

View File

@@ -44,7 +44,12 @@ typedef unsigned long long uint64_t;
#error "Unexpected __riscv_xlen"
#endif
typedef int bool;
#if __STDC_VERSION__ < 202000L
typedef _Bool bool;
#define true 1
#define false 0
#endif
typedef unsigned long ulong;
typedef unsigned long uintptr_t;
typedef unsigned long size_t;
@@ -61,15 +66,15 @@ typedef uint32_t be32_t;
typedef uint64_t le64_t;
typedef uint64_t be64_t;
#define true 1
#define false 0
#define NULL ((void *)0)
#define __packed __attribute__((packed))
#define __noreturn __attribute__((noreturn))
#define __aligned(x) __attribute__((aligned(x)))
#ifndef __always_inline
#define __always_inline inline __attribute__((always_inline))
#endif
#define likely(x) __builtin_expect((x), 1)
#define unlikely(x) __builtin_expect((x), 0)

View File

@@ -0,0 +1,73 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Author: Ivan Orlov <ivan.orlov0322@gmail.com>
*/
#ifdef CONFIG_SBIUNIT
#ifndef __SBI_UNIT_H__
#define __SBI_UNIT_H__
#include <sbi/sbi_types.h>
#include <sbi/sbi_console.h>
#include <sbi/sbi_string.h>
struct sbiunit_test_case {
const char *name;
bool failed;
void (*test_func)(struct sbiunit_test_case *test);
};
struct sbiunit_test_suite {
const char *name;
void (*init)(void);
struct sbiunit_test_case *cases;
};
#define SBIUNIT_TEST_CASE(func) \
{ \
.name = #func, \
.failed = false, \
.test_func = (func) \
}
#define SBIUNIT_END_CASE { }
#define SBIUNIT_TEST_SUITE(suite_name, cases_arr) \
struct sbiunit_test_suite suite_name = { \
.name = #suite_name, \
.init = NULL, \
.cases = cases_arr \
}
#define _sbiunit_msg(test, msg) "[SBIUnit] [%s:%d]: %s: %s", __FILE__, \
__LINE__, test->name, msg
#define SBIUNIT_INFO(test, msg) sbi_printf(_sbiunit_msg(test, msg))
#define SBIUNIT_PANIC(test, msg) sbi_panic(_sbiunit_msg(test, msg))
#define SBIUNIT_EXPECT(test, cond) do { \
if (!(cond)) { \
test->failed = true; \
SBIUNIT_INFO(test, "Condition \"" #cond "\" expected to be true!\n"); \
} \
} while (0)
#define SBIUNIT_ASSERT(test, cond) do { \
if (!(cond)) \
SBIUNIT_PANIC(test, "Condition \"" #cond "\" must be true!\n"); \
} while (0)
#define SBIUNIT_EXPECT_EQ(test, a, b) SBIUNIT_EXPECT(test, (a) == (b))
#define SBIUNIT_ASSERT_EQ(test, a, b) SBIUNIT_ASSERT(test, (a) == (b))
#define SBIUNIT_EXPECT_NE(test, a, b) SBIUNIT_EXPECT(test, (a) != (b))
#define SBIUNIT_ASSERT_NE(test, a, b) SBIUNIT_ASSERT(test, (a) != (b))
#define SBIUNIT_EXPECT_MEMEQ(test, a, b, len) SBIUNIT_EXPECT(test, !sbi_memcmp(a, b, len))
#define SBIUNIT_ASSERT_MEMEQ(test, a, b, len) SBIUNIT_ASSERT(test, !sbi_memcmp(a, b, len))
#define SBIUNIT_EXPECT_STREQ(test, a, b, len) SBIUNIT_EXPECT(test, !sbi_strncmp(a, b, len))
#define SBIUNIT_ASSERT_STREQ(test, a, b, len) SBIUNIT_ASSERT(test, !sbi_strncmp(a, b, len))
void run_all_tests(void);
#endif
#else
#define run_all_tests()
#endif

View File

@@ -11,7 +11,7 @@
#define __SBI_VERSION_H__
#define OPENSBI_VERSION_MAJOR 1
#define OPENSBI_VERSION_MINOR 4
#define OPENSBI_VERSION_MINOR 6
/**
* OpenSBI 32-bit version with:

View File

@@ -0,0 +1,26 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Ventana Micro Systems Inc.
*
* Authors:
* Anup Patel <apatel@ventanamicro.com>
*/
#ifndef __FDT_CPPC_H__
#define __FDT_CPPC_H__
#include <sbi/sbi_types.h>
#include <sbi_utils/fdt/fdt_driver.h>
#ifdef CONFIG_FDT_CPPC
void fdt_cppc_init(const void *fdt);
#else
static inline void fdt_cppc_init(const void *fdt) { }
#endif
#endif

View File

@@ -70,12 +70,12 @@ void fdt_domain_fixup(void *fdt);
*
* @return 0 on success and negative error code on failure
*/
int fdt_domains_populate(void *fdt);
int fdt_domains_populate(const void *fdt);
#else
static inline void fdt_domain_fixup(void *fdt) { }
static inline int fdt_domains_populate(void *fdt) { return 0; }
static inline int fdt_domains_populate(const void *fdt) { return 0; }
#endif

View File

@@ -0,0 +1,60 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* fdt_driver.h - Generic support for initializing drivers from DT nodes.
*
* Copyright (c) 2024 SiFive
*/
#ifndef __FDT_DRIVER_H__
#define __FDT_DRIVER_H__
#include <sbi_utils/fdt/fdt_helper.h>
struct fdt_driver {
const struct fdt_match *match_table;
int (*init)(const void *fdt, int nodeoff,
const struct fdt_match *match);
bool experimental;
};
/**
* Initialize a driver instance for a specific DT node
*
* @param fdt devicetree blob
* @param nodeoff offset of a node in the devicetree blob
* @param drivers NULL-terminated array of drivers to match against this node
*
* @return 0 if a driver was matched and successfully initialized or a negative
* error code on failure
*/
int fdt_driver_init_by_offset(const void *fdt, int nodeoff,
const struct fdt_driver *const *drivers);
/**
* Initialize a driver instance for each DT node that matches any of the
* provided drivers
*
* @param fdt devicetree blob
* @param drivers NULL-terminated array of drivers to match against each node
*
* @return 0 if drivers for all matches (if any) were successfully initialized
* or a negative error code on failure
*/
int fdt_driver_init_all(const void *fdt,
const struct fdt_driver *const *drivers);
/**
* Initialize a driver instance for the first DT node that matches any of the
* provided drivers
*
* @param fdt devicetree blob
* @param drivers NULL-terminated array of drivers to match against each node
*
* @return 0 if a driver was matched and successfully initialized or a negative
* error code on failure
*/
int fdt_driver_init_one(const void *fdt,
const struct fdt_driver *const *drivers);
#endif /* __FDT_DRIVER_H__ */

View File

@@ -9,6 +9,8 @@
#ifndef __FDT_FIXUP_H__
#define __FDT_FIXUP_H__
#include <sbi/sbi_list.h>
struct sbi_cpu_idle_state {
const char *name;
uint32_t suspend_param;
@@ -30,7 +32,7 @@ struct sbi_cpu_idle_state {
* @param states: array of idle state descriptions, ending with empty element
* @return zero on success and -ve on failure
*/
int fdt_add_cpu_idle_states(void *dtb, const struct sbi_cpu_idle_state *state);
int fdt_add_cpu_idle_states(void *fdt, const struct sbi_cpu_idle_state *state);
/**
* Fix up the CPU node in the device tree
@@ -93,6 +95,19 @@ void fdt_plic_fixup(void *fdt);
*/
int fdt_reserved_memory_fixup(void *fdt);
/** Representation of a general fixup */
struct fdt_general_fixup {
struct sbi_dlist head;
const char *name;
void (*do_fixup)(struct fdt_general_fixup *f, void *fdt);
};
/** Register a general fixup */
int fdt_register_general_fixup(struct fdt_general_fixup *fixup);
/** UnRegister a general fixup */
void fdt_unregister_general_fixup(struct fdt_general_fixup *fixup);
/**
* General device tree fix-up
*

View File

@@ -34,87 +34,92 @@ struct platform_uart_data {
unsigned long reg_offset;
};
const struct fdt_match *fdt_match_node(void *fdt, int nodeoff,
const struct fdt_match *fdt_match_node(const void *fdt, int nodeoff,
const struct fdt_match *match_table);
int fdt_find_match(void *fdt, int startoff,
int fdt_find_match(const void *fdt, int startoff,
const struct fdt_match *match_table,
const struct fdt_match **out_match);
int fdt_parse_phandle_with_args(void *fdt, int nodeoff,
int fdt_parse_phandle_with_args(const void *fdt, int nodeoff,
const char *prop, const char *cells_prop,
int index, struct fdt_phandle_args *out_args);
int fdt_get_node_addr_size(void *fdt, int node, int index,
int fdt_get_node_addr_size(const void *fdt, int node, int index,
uint64_t *addr, uint64_t *size);
int fdt_get_node_addr_size_by_name(void *fdt, int node, const char *name,
int fdt_get_node_addr_size_by_name(const void *fdt, int node, const char *name,
uint64_t *addr, uint64_t *size);
bool fdt_node_is_enabled(void *fdt, int nodeoff);
bool fdt_node_is_enabled(const void *fdt, int nodeoff);
int fdt_parse_hart_id(void *fdt, int cpu_offset, u32 *hartid);
int fdt_parse_hart_id(const void *fdt, int cpu_offset, u32 *hartid);
int fdt_parse_max_enabled_hart_id(void *fdt, u32 *max_hartid);
int fdt_parse_max_enabled_hart_id(const void *fdt, u32 *max_hartid);
int fdt_parse_timebase_frequency(void *fdt, unsigned long *freq);
int fdt_parse_timebase_frequency(const void *fdt, unsigned long *freq);
int fdt_parse_isa_extensions(void *fdt, unsigned int hard_id,
int fdt_parse_isa_extensions(const void *fdt, unsigned int hard_id,
unsigned long *extensions);
int fdt_parse_gaisler_uart_node(void *fdt, int nodeoffset,
int fdt_parse_gaisler_uart_node(const void *fdt, int nodeoffset,
struct platform_uart_data *uart);
int fdt_parse_renesas_scif_node(void *fdt, int nodeoffset,
int fdt_parse_renesas_scif_node(const void *fdt, int nodeoffset,
struct platform_uart_data *uart);
int fdt_parse_shakti_uart_node(void *fdt, int nodeoffset,
int fdt_parse_shakti_uart_node(const void *fdt, int nodeoffset,
struct platform_uart_data *uart);
int fdt_parse_sifive_uart_node(void *fdt, int nodeoffset,
int fdt_parse_sifive_uart_node(const void *fdt, int nodeoffset,
struct platform_uart_data *uart);
int fdt_parse_uart_node(void *fdt, int nodeoffset,
int fdt_parse_uart_node(const void *fdt, int nodeoffset,
struct platform_uart_data *uart);
int fdt_parse_uart8250(void *fdt, struct platform_uart_data *uart,
int fdt_parse_uart8250(const void *fdt, struct platform_uart_data *uart,
const char *compatible);
int fdt_parse_xlnx_uartlite_node(void *fdt, int nodeoffset,
int fdt_parse_xlnx_uartlite_node(const void *fdt, int nodeoffset,
struct platform_uart_data *uart);
struct aplic_data;
int fdt_parse_aplic_node(void *fdt, int nodeoff, struct aplic_data *aplic);
int fdt_parse_aplic_node(const void *fdt, int nodeoff, struct aplic_data *aplic);
struct imsic_data;
bool fdt_check_imsic_mlevel(void *fdt);
bool fdt_check_imsic_mlevel(const void *fdt);
int fdt_parse_imsic_node(void *fdt, int nodeoff, struct imsic_data *imsic);
int fdt_parse_imsic_node(const void *fdt, int nodeoff, struct imsic_data *imsic);
struct plic_data;
int fdt_parse_plic_node(void *fdt, int nodeoffset, struct plic_data *plic);
int fdt_parse_plic_node(const void *fdt, int nodeoffset, struct plic_data *plic);
int fdt_parse_plic(void *fdt, struct plic_data *plic, const char *compat);
int fdt_parse_plic(const void *fdt, struct plic_data *plic, const char *compat);
int fdt_parse_aclint_node(void *fdt, int nodeoffset,
int fdt_parse_aclint_node(const void *fdt, int nodeoffset,
bool for_timer, bool allow_regname,
unsigned long *out_addr1, unsigned long *out_size1,
unsigned long *out_addr2, unsigned long *out_size2,
u32 *out_first_hartid, u32 *out_hart_count);
int fdt_parse_plmt_node(void *fdt, int nodeoffset, unsigned long *plmt_base,
int fdt_parse_plmt_node(const void *fdt, int nodeoffset, unsigned long *plmt_base,
unsigned long *plmt_size, u32 *hart_count);
int fdt_parse_plicsw_node(void *fdt, int nodeoffset, unsigned long *plicsw_base,
int fdt_parse_plicsw_node(const void *fdt, int nodeoffset, unsigned long *plicsw_base,
unsigned long *size, u32 *hart_count);
int fdt_parse_compat_addr(void *fdt, uint64_t *addr,
int fdt_parse_compat_addr(const void *fdt, uint64_t *addr,
const char *compatible);
static inline void *fdt_get_address(void)
static inline const void *fdt_get_address(void)
{
return (const void *)root.next_arg1;
}
static inline void *fdt_get_address_rw(void)
{
return (void *)root.next_arg1;
}

View File

@@ -52,7 +52,7 @@ int fdt_pmu_fixup(void *fdt);
*
* @return 0 on success and negative error code on failure
*/
int fdt_pmu_setup(void *fdt);
int fdt_pmu_setup(const void *fdt);
/**
* Get the mhpmevent select value read from DT for a given event
@@ -70,7 +70,7 @@ extern uint32_t hw_event_count;
#else
static inline void fdt_pmu_fixup(void *fdt) { }
static inline int fdt_pmu_setup(void *fdt) { return 0; }
static inline int fdt_pmu_setup(const void *fdt) { return 0; }
static inline uint64_t fdt_pmu_get_select_value(uint32_t event_idx) { return 0; }
#endif

View File

@@ -10,22 +10,21 @@
#ifndef __FDT_GPIO_H__
#define __FDT_GPIO_H__
#include <sbi_utils/fdt/fdt_driver.h>
#include <sbi_utils/gpio/gpio.h>
struct fdt_phandle_args;
/** FDT based GPIO driver */
struct fdt_gpio {
const struct fdt_match *match_table;
struct fdt_driver driver;
int (*xlate)(struct gpio_chip *chip,
const struct fdt_phandle_args *pargs,
struct gpio_pin *out_pin);
int (*init)(void *fdt, int nodeoff, u32 phandle,
const struct fdt_match *match);
};
/** Get a GPIO pin using "gpios" DT property of client DT node */
int fdt_gpio_pin_get(void *fdt, int nodeoff, int index,
int fdt_gpio_pin_get(const void *fdt, int nodeoff, int index,
struct gpio_pin *out_pin);
/** Simple xlate function to convert two GPIO FDT cells into GPIO pin */

View File

@@ -40,7 +40,7 @@ struct gpio_pin {
/** Representation of a GPIO chip */
struct gpio_chip {
/** Pointer to GPIO driver owning this GPIO chip */
void *driver;
const void *driver;
/** Uniquie ID of the GPIO chip assigned by the driver */
unsigned int id;
/** Number of GPIOs supported by the GPIO chip */

View File

@@ -0,0 +1,26 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Ventana Micro Systems Inc.
*
* Authors:
* Anup Patel <apatel@ventanamicro.com>
*/
#ifndef __FDT_HSM_H__
#define __FDT_HSM_H__
#include <sbi/sbi_types.h>
#include <sbi_utils/fdt/fdt_driver.h>
#ifdef CONFIG_FDT_HSM
void fdt_hsm_init(const void *fdt);
#else
static inline void fdt_hsm_init(const void *fdt) { }
#endif
#endif

View File

@@ -10,17 +10,11 @@
#ifndef __FDT_I2C_H__
#define __FDT_I2C_H__
#include <sbi_utils/fdt/fdt_driver.h>
#include <sbi_utils/i2c/i2c.h>
/** FDT based I2C adapter driver */
struct fdt_i2c_adapter {
const struct fdt_match *match_table;
int (*init)(void *fdt, int nodeoff,
const struct fdt_match *match);
};
/** Get I2C adapter identified by nodeoff */
int fdt_i2c_adapter_get(void *fdt, int nodeoff,
int fdt_i2c_adapter_get(const void *fdt, int nodeoff,
struct i2c_adapter **out_adapter);
#endif

View File

@@ -26,8 +26,6 @@ struct aclint_mswi_data {
u32 hart_count;
};
int aclint_mswi_warm_init(void);
int aclint_mswi_cold_init(struct aclint_mswi_data *mswi);
#endif

View File

@@ -32,8 +32,6 @@ struct plicsw_data {
uint32_t hart_count;
};
int plicsw_warm_ipi_init(void);
int plicsw_cold_ipi_init(struct plicsw_data *plicsw);
#endif /* _IPI_ANDES_PLICSW_H_ */

View File

@@ -11,24 +11,15 @@
#define __FDT_IPI_H__
#include <sbi/sbi_types.h>
#include <sbi_utils/fdt/fdt_driver.h>
#ifdef CONFIG_FDT_IPI
struct fdt_ipi {
const struct fdt_match *match_table;
int (*cold_init)(void *fdt, int nodeoff, const struct fdt_match *match);
int (*warm_init)(void);
void (*exit)(void);
};
void fdt_ipi_exit(void);
int fdt_ipi_init(bool cold_boot);
int fdt_ipi_init(void);
#else
static inline void fdt_ipi_exit(void) { }
static inline int fdt_ipi_init(bool cold_boot) { return 0; }
static inline int fdt_ipi_init(void) { return 0; }
#endif

View File

@@ -12,6 +12,7 @@
#define __IRQCHIP_APLIC_H__
#include <sbi/sbi_types.h>
#include <sbi/sbi_irqchip.h>
#define APLIC_MAX_DELEGATE 16
@@ -30,6 +31,9 @@ struct aplic_delegate_data {
};
struct aplic_data {
/* Private members */
struct sbi_irqchip_device irqchip;
/* Public members */
unsigned long addr;
unsigned long size;
unsigned long num_idc;

View File

@@ -16,20 +16,14 @@
struct fdt_irqchip {
const struct fdt_match *match_table;
int (*cold_init)(void *fdt, int nodeoff, const struct fdt_match *match);
int (*warm_init)(void);
void (*exit)(void);
int (*cold_init)(const void *fdt, int nodeoff, const struct fdt_match *match);
};
void fdt_irqchip_exit(void);
int fdt_irqchip_init(bool cold_boot);
int fdt_irqchip_init(void);
#else
static inline void fdt_irqchip_exit(void) { }
static inline int fdt_irqchip_init(bool cold_boot) { return 0; }
static inline int fdt_irqchip_init(void) { return 0; }
#endif

View File

@@ -1,33 +0,0 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2022 Samuel Holland <samuel@sholland.org>
*/
#ifndef __IRQCHIP_FDT_IRQCHIP_PLIC_H__
#define __IRQCHIP_FDT_IRQCHIP_PLIC_H__
#include <sbi/sbi_types.h>
/**
* Save the PLIC priority state
* @param priority pointer to the memory region for the saved priority
* @param num size of the memory region including interrupt source 0
*/
void fdt_plic_priority_save(u8 *priority, u32 num);
/**
* Restore the PLIC priority state
* @param priority pointer to the memory region for the saved priority
* @param num size of the memory region including interrupt source 0
*/
void fdt_plic_priority_restore(const u8 *priority, u32 num);
void fdt_plic_context_save(bool smode, u32 *enable, u32 *threshold, u32 num);
void fdt_plic_context_restore(bool smode, const u32 *enable, u32 threshold,
u32 num);
void thead_plic_restore(void);
#endif

View File

@@ -37,14 +37,12 @@ struct imsic_data {
int imsic_map_hartid_to_data(u32 hartid, struct imsic_data *imsic, int file);
struct imsic_data *imsic_get_data(u32 hartid);
struct imsic_data *imsic_get_data(u32 hartindex);
int imsic_get_target_file(u32 hartid);
int imsic_get_target_file(u32 hartindex);
void imsic_local_irqchip_init(void);
int imsic_warm_irqchip_init(void);
int imsic_data_check(struct imsic_data *imsic);
int imsic_cold_irqchip_init(struct imsic_data *imsic);

View File

@@ -11,31 +11,41 @@
#define __IRQCHIP_PLIC_H__
#include <sbi/sbi_types.h>
#include <sbi/sbi_irqchip.h>
struct plic_data {
/* Private members */
struct sbi_irqchip_device irqchip;
/* Public members */
unsigned long addr;
unsigned long size;
unsigned long num_src;
unsigned long flags;
void *pm_data;
s16 context_map[][2];
};
/* So far, priorities on all consumers of these functions fit in 8 bits. */
void plic_priority_save(const struct plic_data *plic, u8 *priority, u32 num);
/** Work around a bug on Ariane that requires enabling interrupts at boot */
#define PLIC_FLAG_ARIANE_BUG BIT(0)
/** PLIC must be delegated to S-mode like T-HEAD C906 and C910 */
#define PLIC_FLAG_THEAD_DELEGATION BIT(1)
/** Allocate space for power management save/restore operations */
#define PLIC_FLAG_ENABLE_PM BIT(2)
void plic_priority_restore(const struct plic_data *plic, const u8 *priority,
u32 num);
#define PLIC_M_CONTEXT 0
#define PLIC_S_CONTEXT 1
void plic_context_save(const struct plic_data *plic, int context_id,
u32 *enable, u32 *threshold, u32 num);
#define PLIC_DATA_SIZE(__hart_count) (sizeof(struct plic_data) + \
(__hart_count) * 2 * sizeof(s16))
void plic_context_restore(const struct plic_data *plic, int context_id,
const u32 *enable, u32 threshold, u32 num);
#define PLIC_IE_WORDS(__p) ((__p)->num_src / 32 + 1)
int plic_context_init(const struct plic_data *plic, int context_id,
bool enable, u32 threshold);
struct plic_data *plic_get(void);
int plic_warm_irqchip_init(const struct plic_data *plic,
int m_cntx_id, int s_cntx_id);
void plic_suspend(void);
int plic_cold_irqchip_init(const struct plic_data *plic);
void plic_resume(void);
int plic_cold_irqchip_init(struct plic_data *plic);
#endif

View File

@@ -0,0 +1,35 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Ventana Micro Systems Inc.
*
* Authors:
* Anup Patel <apatel@ventanamicro.com>
*/
#ifndef __FDT_MAILBOX_H__
#define __FDT_MAILBOX_H__
#include <sbi_utils/fdt/fdt_driver.h>
#include <sbi_utils/mailbox/mailbox.h>
struct fdt_phandle_args;
/** FDT based mailbox driver */
struct fdt_mailbox {
struct fdt_driver driver;
int (*xlate)(struct mbox_controller *mbox,
const struct fdt_phandle_args *pargs,
u32 *out_chan_args);
};
/** Request a mailbox channel using "mboxes" DT property of client DT node */
int fdt_mailbox_request_chan(const void *fdt, int nodeoff, int index,
struct mbox_chan **out_chan);
/** Simple xlate function to convert one mailbox FDT cell into channel args */
int fdt_mailbox_simple_xlate(struct mbox_controller *mbox,
const struct fdt_phandle_args *pargs,
u32 *out_chan_args);
#endif

View File

@@ -0,0 +1,180 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Ventana Micro Systems Inc.
*
* Authors:
* Anup Patel <apatel@ventanamicro.com>
*/
#ifndef __MAILBOX_H__
#define __MAILBOX_H__
#include <sbi/sbi_types.h>
#include <sbi/sbi_list.h>
#include <sbi/riscv_atomic.h>
/** Representation of a mailbox channel */
struct mbox_chan {
/** List head */
struct sbi_dlist node;
/** Pointer to the mailbox controller */
struct mbox_controller *mbox;
/**
* Arguments (or parameters) to identify a mailbox channel
* within a mailbox controller.
*/
#define MBOX_CHAN_MAX_ARGS 2
u32 chan_args[MBOX_CHAN_MAX_ARGS];
};
#define to_mbox_chan(__node) \
container_of((__node), struct mbox_chan, node)
/**
* Representation of a mailbox data transfer
*
* NOTE: If both "tx" and "rx" are non-NULL then Tx is done before Rx.
*/
struct mbox_xfer {
#define MBOX_XFER_SEQ (1UL << 0)
/** Transfer flags */
unsigned long flags;
/** Transfer arguments (or parameters) */
void *args;
/**
* Sequence number
*
* If MBOX_XFER_SEQ is not set in flags then mbox_chan_xfer()
* will generate a unique sequence number and update this field
* else mbox_chan_xfer() will blindly use the sequence number
* specified by this field.
*/
long seq;
/** Send data pointer */
void *tx;
/** Send data length (valid only if tx != NULL) */
unsigned long tx_len;
/**
* Send timeout milliseconds (valid only if tx != NULL)
*
* If this field is non-zero along with tx != NULL then the
* mailbox controller driver will wait specified milliseconds
* for send data transfer to complete else the mailbox controller
* driver will not wait.
*/
unsigned long tx_timeout;
/** Receive data pointer */
void *rx;
/** Receive data length (valid only if rx != NULL) */
unsigned long rx_len;
/**
* Receive timeout milliseconds (valid only if rx != NULL)
*
* If this field is non-zero along with rx != NULL then the
* mailbox controller driver will wait specified milliseconds
* for receive data transfer to complete else the mailbox
* controller driver will not wait.
*/
unsigned long rx_timeout;
};
#define mbox_xfer_init_tx(__p, __a, __t, __t_len, __t_tim) \
do { \
(__p)->flags = 0; \
(__p)->args = (__a); \
(__p)->tx = (__t); \
(__p)->tx_len = (__t_len); \
(__p)->tx_timeout = (__t_tim); \
(__p)->rx = NULL; \
(__p)->rx_len = 0; \
(__p)->rx_timeout = 0; \
} while (0)
#define mbox_xfer_init_rx(__p, __a, __r, __r_len, __r_tim) \
do { \
(__p)->flags = 0; \
(__p)->args = (__a); \
(__p)->tx = NULL; \
(__p)->tx_len = 0; \
(__p)->tx_timeout = 0; \
(__p)->rx = (__r); \
(__p)->rx_len = (__r_len); \
(__p)->rx_timeout = (__r_tim); \
} while (0)
#define mbox_xfer_init_txrx(__p, __a, __t, __t_len, __t_tim, __r, __r_len, __r_tim)\
do { \
(__p)->flags = 0; \
(__p)->args = (__a); \
(__p)->tx = (__t); \
(__p)->tx_len = (__t_len); \
(__p)->tx_timeout = (__t_tim); \
(__p)->rx = (__r); \
(__p)->rx_len = (__r_len); \
(__p)->rx_timeout = (__r_tim); \
} while (0)
#define mbox_xfer_set_sequence(__p, __seq) \
do { \
(__p)->flags |= MBOX_XFER_SEQ; \
(__p)->seq = (__seq); \
} while (0)
/** Representation of a mailbox controller */
struct mbox_controller {
/** List head */
struct sbi_dlist node;
/** Next sequence atomic counter */
atomic_t xfer_next_seq;
/* List of mailbox channels */
struct sbi_dlist chan_list;
/** Unique ID of the mailbox controller assigned by the driver */
unsigned int id;
/** Maximum length of transfer supported by the mailbox controller */
unsigned int max_xfer_len;
/** Pointer to mailbox driver owning this mailbox controller */
void *driver;
/** Request a mailbox channel from the mailbox controller */
struct mbox_chan *(*request_chan)(struct mbox_controller *mbox,
u32 *chan_args);
/** Free a mailbox channel from the mailbox controller */
void (*free_chan)(struct mbox_controller *mbox,
struct mbox_chan *chan);
/** Transfer data over mailbox channel */
int (*xfer)(struct mbox_chan *chan, struct mbox_xfer *xfer);
/** Get an attribute of mailbox channel */
int (*get_attribute)(struct mbox_chan *chan, int attr_id, void *out_value);
/** Set an attribute of mailbox channel */
int (*set_attribute)(struct mbox_chan *chan, int attr_id, void *new_value);
};
#define to_mbox_controller(__node) \
container_of((__node), struct mbox_controller, node)
/** Find a registered mailbox controller */
struct mbox_controller *mbox_controller_find(unsigned int id);
/** Register mailbox controller */
int mbox_controller_add(struct mbox_controller *mbox);
/** Un-register mailbox controller */
void mbox_controller_remove(struct mbox_controller *mbox);
/** Request a mailbox channel */
struct mbox_chan *mbox_controller_request_chan(struct mbox_controller *mbox,
u32 *chan_args);
/** Free a mailbox channel */
void mbox_controller_free_chan(struct mbox_chan *chan);
/** Data transfer over mailbox channel */
int mbox_chan_xfer(struct mbox_chan *chan, struct mbox_xfer *xfer);
/** Get an attribute of mailbox channel */
int mbox_chan_get_attribute(struct mbox_chan *chan, int attr_id, void *out_value);
/** Set an attribute of mailbox channel */
int mbox_chan_set_attribute(struct mbox_chan *chan, int attr_id, void *new_value);
#endif

View File

@@ -0,0 +1,32 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2023 Ventana Micro Systems Inc.
*
* Authors:
* Anup Patel <apatel@ventanamicro.com>
*/
#ifndef __RPMI_MAILBOX_H__
#define __RPMI_MAILBOX_H__
#include <sbi/sbi_error.h>
#include <sbi_utils/mailbox/rpmi_msgprot.h>
#define rpmi_u32_count(__var) (sizeof(__var) / sizeof(u32))
/** Convert RPMI error to SBI error */
int rpmi_xlate_error(enum rpmi_error error);
/** Typical RPMI normal request with at least status code in response */
int rpmi_normal_request_with_status(
struct mbox_chan *chan, u32 service_id,
void *req, u32 req_words, u32 req_endian_words,
void *resp, u32 resp_words, u32 resp_endian_words);
/* RPMI posted request which is without any response*/
int rpmi_posted_request(
struct mbox_chan *chan, u32 service_id,
void *req, u32 req_words, u32 req_endian_words);
#endif /* !__RPMI_MAILBOX_H__ */

View File

@@ -0,0 +1,607 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2023 Ventana Micro Systems Inc.
*
* Authors:
* Rahul Pathak <rpathak@ventanamicro.com>
* Subrahmanya Lingappa <slingappa@ventanamicro.com>
*/
#ifndef __RPMI_MSGPROT_H__
#define __RPMI_MSGPROT_H__
#include <sbi/sbi_byteorder.h>
#include <sbi/sbi_error.h>
/*
* 31 0
* +---------------------+-----------------------+
* | FLAGS | SERVICE_ID | SERVICEGROUP_ID |
* +---------------------+-----------------------+
* | TOKEN | DATA LENGTH |
* +---------------------+-----------------------+
* | DATA/PAYLOAD |
* +---------------------------------------------+
*/
/** Message Header byte offset */
#define RPMI_MSG_HDR_OFFSET (0x0)
/** Message Header Size in bytes */
#define RPMI_MSG_HDR_SIZE (8)
/** ServiceGroup ID field byte offset */
#define RPMI_MSG_SERVICEGROUP_ID_OFFSET (0x0)
/** ServiceGroup ID field size in bytes */
#define RPMI_MSG_SERVICEGROUP_ID_SIZE (2)
/** Service ID field byte offset */
#define RPMI_MSG_SERVICE_ID_OFFSET (0x2)
/** Service ID field size in bytes */
#define RPMI_MSG_SERVICE_ID_SIZE (1)
/** Flags field byte offset */
#define RPMI_MSG_FLAGS_OFFSET (0x3)
/** Flags field size in bytes */
#define RPMI_MSG_FLAGS_SIZE (1)
#define RPMI_MSG_FLAGS_TYPE_POS (0U)
#define RPMI_MSG_FLAGS_TYPE_MASK 0x7
#define RPMI_MSG_FLAGS_TYPE \
((0x7) << RPMI_MSG_FLAGS_TYPE_POS)
#define RPMI_MSG_FLAGS_DOORBELL_POS (3U)
#define RPMI_MSG_FLAGS_DOORBELL_MASK 0x1
#define RPMI_MSG_FLAGS_DOORBELL \
((0x1) << RPMI_MSG_FLAGS_DOORBELL_POS)
/** Data length field byte offset */
#define RPMI_MSG_DATALEN_OFFSET (0x4)
/** Data length field size in bytes */
#define RPMI_MSG_DATALEN_SIZE (2)
/** Token field byte offset */
#define RPMI_MSG_TOKEN_OFFSET (0x6)
/** Token field size in bytes */
#define RPMI_MSG_TOKEN_SIZE (2)
/** Token field mask */
#define RPMI_MSG_TOKEN_MASK (0xffffU)
/** Data field byte offset */
#define RPMI_MSG_DATA_OFFSET (RPMI_MSG_HDR_SIZE)
/** Data field size in bytes */
#define RPMI_MSG_DATA_SIZE(__slot_size) ((__slot_size) - RPMI_MSG_HDR_SIZE)
/** Minimum slot size in bytes */
#define RPMI_SLOT_SIZE_MIN (64)
/** Name length of 16 characters */
#define RPMI_NAME_CHARS_MAX (16)
/** Queue layout */
#define RPMI_QUEUE_HEAD_SLOT 0
#define RPMI_QUEUE_TAIL_SLOT 1
#define RPMI_QUEUE_HEADER_SLOTS 2
/** Default timeout values */
#define RPMI_DEF_TX_TIMEOUT 20
#define RPMI_DEF_RX_TIMEOUT 20
/**
* Common macro to generate composite version from major
* and minor version numbers.
*
* RPMI has Specification version, Implementation version
* Service group versions which follow the same versioning
* encoding as below.
*/
#define RPMI_VERSION(__major, __minor) (((__major) << 16) | (__minor))
/** RPMI Message Header */
struct rpmi_message_header {
le16_t servicegroup_id;
uint8_t service_id;
uint8_t flags;
le16_t datalen;
le16_t token;
} __packed;
/** RPMI Message */
struct rpmi_message {
struct rpmi_message_header header;
u8 data[0];
} __packed;
/** RPMI Messages Types */
enum rpmi_message_type {
/* Normal request backed with ack */
RPMI_MSG_NORMAL_REQUEST = 0x0,
/* Request without any ack */
RPMI_MSG_POSTED_REQUEST = 0x1,
/* Acknowledgment for normal request message */
RPMI_MSG_ACKNOWLDGEMENT = 0x2,
/* Notification message */
RPMI_MSG_NOTIFICATION = 0x3,
};
/** RPMI Error Types */
enum rpmi_error {
/* Success */
RPMI_SUCCESS = 0,
/* General failure */
RPMI_ERR_FAILED = -1,
/* Service or feature not supported */
RPMI_ERR_NOTSUPP = -2,
/* Invalid Parameter */
RPMI_ERR_INVALID_PARAM = -3,
/*
* Denied to insufficient permissions
* or due to unmet prerequisite
*/
RPMI_ERR_DENIED = -4,
/* Invalid address or offset */
RPMI_ERR_INVALID_ADDR = -5,
/*
* Operation failed as it was already in
* progress or the state has changed already
* for which the operation was carried out.
*/
RPMI_ERR_ALREADY = -6,
/*
* Error in implementation which violates
* the specification version
*/
RPMI_ERR_EXTENSION = -7,
/* Operation failed due to hardware issues */
RPMI_ERR_HW_FAULT = -8,
/* System, device or resource is busy */
RPMI_ERR_BUSY = -9,
/* System or device or resource in invalid state */
RPMI_ERR_INVALID_STATE = -10,
/* Index, offset or address is out of range */
RPMI_ERR_BAD_RANGE = -11,
/* Operation timed out */
RPMI_ERR_TIMEOUT = -12,
/*
* Error in input or output or
* error in sending or receiving data
* through communication medium
*/
RPMI_ERR_IO = -13,
/* No data available */
RPMI_ERR_NO_DATA = -14,
RPMI_ERR_RESERVED_START = -15,
RPMI_ERR_RESERVED_END = -127,
RPMI_ERR_VENDOR_START = -128,
};
/** RPMI Message Arguments */
struct rpmi_message_args {
u32 flags;
#define RPMI_MSG_FLAGS_NO_TX (1U << 0)
#define RPMI_MSG_FLAGS_NO_RX (1U << 1)
#define RPMI_MSG_FLAGS_NO_RX_TOKEN (1U << 2)
enum rpmi_message_type type;
u8 service_id;
u32 tx_endian_words;
u32 rx_endian_words;
u16 rx_token;
u32 rx_data_len;
};
/*
* RPMI SERVICEGROUPS AND SERVICES
*/
/** RPMI ServiceGroups IDs */
enum rpmi_servicegroup_id {
RPMI_SRVGRP_ID_MIN = 0,
RPMI_SRVGRP_BASE = 0x0001,
RPMI_SRVGRP_SYSTEM_RESET = 0x0002,
RPMI_SRVGRP_SYSTEM_SUSPEND = 0x0003,
RPMI_SRVGRP_HSM = 0x0004,
RPMI_SRVGRP_CPPC = 0x0005,
RPMI_SRVGRP_CLOCK = 0x0007,
RPMI_SRVGRP_ID_MAX_COUNT,
/* Reserved range for service groups */
RPMI_SRVGRP_RESERVE_START = RPMI_SRVGRP_ID_MAX_COUNT,
RPMI_SRVGRP_RESERVE_END = 0x7FFF,
/* Vendor/Implementation-specific service groups range */
RPMI_SRVGRP_VENDOR_START = 0x8000,
RPMI_SRVGRP_VENDOR_END = 0xFFFF,
};
/** RPMI enable notification request */
struct rpmi_enable_notification_req {
u32 eventid;
};
/** RPMI enable notification response */
struct rpmi_enable_notification_resp {
s32 status;
};
/** RPMI Base ServiceGroup Service IDs */
enum rpmi_base_service_id {
RPMI_BASE_SRV_ENABLE_NOTIFICATION = 0x01,
RPMI_BASE_SRV_GET_IMPLEMENTATION_VERSION = 0x02,
RPMI_BASE_SRV_GET_IMPLEMENTATION_IDN = 0x03,
RPMI_BASE_SRV_GET_SPEC_VERSION = 0x04,
RPMI_BASE_SRV_GET_PLATFORM_INFO = 0x05,
RPMI_BASE_SRV_PROBE_SERVICE_GROUP = 0x06,
RPMI_BASE_SRV_GET_ATTRIBUTES = 0x07,
RPMI_BASE_SRV_SET_MSI = 0x08,
};
#define RPMI_BASE_FLAGS_F0_PRIVILEGE (1U << 2)
#define RPMI_BASE_FLAGS_F0_EV_NOTIFY (1U << 1)
#define RPMI_BASE_FLAGS_F0_MSI_EN (1U)
enum rpmi_base_context_priv_level {
RPMI_BASE_CONTEXT_PRIV_S_MODE,
RPMI_BASE_CONTEXT_PRIV_M_MODE,
};
struct rpmi_base_get_attributes_resp {
s32 status_code;
u32 f0;
u32 f1;
u32 f2;
u32 f3;
};
struct rpmi_base_get_platform_info_resp {
s32 status;
u32 plat_info_len;
char plat_info[];
};
/** RPMI System Reset ServiceGroup Service IDs */
enum rpmi_system_reset_service_id {
RPMI_SYSRST_SRV_ENABLE_NOTIFICATION = 0x01,
RPMI_SYSRST_SRV_GET_ATTRIBUTES = 0x02,
RPMI_SYSRST_SRV_SYSTEM_RESET = 0x03,
RPMI_SYSRST_SRV_ID_MAX_COUNT,
};
/** RPMI System Reset types */
enum rpmi_sysrst_reset_type {
RPMI_SYSRST_TYPE_SHUTDOWN = 0x0,
RPMI_SYSRST_TYPE_COLD_REBOOT = 0x1,
RPMI_SYSRST_TYPE_WARM_REBOOT = 0x2,
RPMI_SYSRST_TYPE_MAX,
};
#define RPMI_SYSRST_ATTRS_FLAGS_RESETTYPE_POS (1)
#define RPMI_SYSRST_ATTRS_FLAGS_RESETTYPE_MASK \
(1U << RPMI_SYSRST_ATTRS_FLAGS_RESETTYPE_POS)
/** Response for system reset attributes */
struct rpmi_sysrst_get_reset_attributes_resp {
s32 status;
u32 flags;
};
/** RPMI System Suspend ServiceGroup Service IDs */
enum rpmi_system_suspend_service_id {
RPMI_SYSSUSP_SRV_ENABLE_NOTIFICATION = 0x01,
RPMI_SYSSUSP_SRV_GET_ATTRIBUTES = 0x02,
RPMI_SYSSUSP_SRV_SYSTEM_SUSPEND = 0x03,
RPMI_SYSSUSP_SRV_ID_MAX_COUNT,
};
/** Request for system suspend attributes */
struct rpmi_syssusp_get_attr_req {
u32 susp_type;
};
#define RPMI_SYSSUSP_ATTRS_FLAGS_RESUMEADDR (1U << 1)
#define RPMI_SYSSUSP_ATTRS_FLAGS_SUSPENDTYPE 1U
/** Response for system suspend attributes */
struct rpmi_syssusp_get_attr_resp {
s32 status;
u32 flags;
};
struct rpmi_syssusp_suspend_req {
u32 hartid;
u32 suspend_type;
u32 resume_addr_lo;
u32 resume_addr_hi;
};
struct rpmi_syssusp_suspend_resp {
s32 status;
};
/** RPMI HSM State Management ServiceGroup Service IDs */
enum rpmi_hsm_service_id {
RPMI_HSM_SRV_ENABLE_NOTIFICATION = 0x01,
RPMI_HSM_SRV_GET_HART_STATUS = 0x02,
RPMI_HSM_SRV_GET_HART_LIST = 0x03,
RPMI_HSM_SRV_GET_SUSPEND_TYPES = 0x04,
RPMI_HSM_SRV_GET_SUSPEND_INFO = 0x05,
RPMI_HSM_SRV_HART_START = 0x06,
RPMI_HSM_SRV_HART_STOP = 0x07,
RPMI_HSM_SRV_HART_SUSPEND = 0x08,
RPMI_HSM_SRV_ID_MAX = 0x09,
};
/* HSM service group request and response structs */
struct rpmi_hsm_hart_start_req {
u32 hartid;
u32 start_addr_lo;
u32 start_addr_hi;
};
struct rpmi_hsm_hart_start_resp {
s32 status;
};
struct rpmi_hsm_hart_stop_req {
u32 hartid;
};
struct rpmi_hsm_hart_stop_resp {
s32 status;
};
struct rpmi_hsm_hart_susp_req {
u32 hartid;
u32 suspend_type;
u32 resume_addr_lo;
u32 resume_addr_hi;
};
struct rpmi_hsm_hart_susp_resp {
s32 status;
};
struct rpmi_hsm_get_hart_status_req {
u32 hartid;
};
struct rpmi_hsm_get_hart_status_resp {
s32 status;
u32 hart_status;
};
struct rpmi_hsm_get_hart_list_req {
u32 start_index;
};
struct rpmi_hsm_get_hart_list_resp {
s32 status;
u32 remaining;
u32 returned;
/* remaining space need to be adjusted for the above 3 u32's */
u32 hartid[(RPMI_MSG_DATA_SIZE(RPMI_SLOT_SIZE_MIN) - (sizeof(u32) * 3)) / sizeof(u32)];
};
struct rpmi_hsm_get_susp_types_req {
u32 start_index;
};
struct rpmi_hsm_get_susp_types_resp {
s32 status;
u32 remaining;
u32 returned;
/* remaining space need to be adjusted for the above 3 u32's */
u32 types[(RPMI_MSG_DATA_SIZE(RPMI_SLOT_SIZE_MIN) - (sizeof(u32) * 3)) / sizeof(u32)];
};
struct rpmi_hsm_get_susp_info_req {
u32 suspend_type;
};
#define RPMI_HSM_SUSPEND_INFO_FLAGS_TIMER_STOP 1U
struct rpmi_hsm_get_susp_info_resp {
s32 status;
u32 flags;
u32 entry_latency_us;
u32 exit_latency_us;
u32 wakeup_latency_us;
u32 min_residency_us;
};
/** RPMI CPPC ServiceGroup Service IDs */
enum rpmi_cppc_service_id {
RPMI_CPPC_SRV_ENABLE_NOTIFICATION = 0x01,
RPMI_CPPC_SRV_PROBE_REG = 0x02,
RPMI_CPPC_SRV_READ_REG = 0x03,
RPMI_CPPC_SRV_WRITE_REG = 0x04,
RPMI_CPPC_SRV_GET_FAST_CHANNEL_REGION = 0x05,
RPMI_CPPC_SRV_GET_FAST_CHANNEL_OFFSET = 0x06,
RPMI_CPPC_SRV_GET_HART_LIST = 0x07,
RPMI_CPPC_SRV_MAX_COUNT,
};
struct rpmi_cppc_probe_req {
u32 hart_id;
u32 reg_id;
};
struct rpmi_cppc_probe_resp {
s32 status;
u32 reg_len;
};
struct rpmi_cppc_read_reg_req {
u32 hart_id;
u32 reg_id;
};
struct rpmi_cppc_read_reg_resp {
s32 status;
u32 data_lo;
u32 data_hi;
};
struct rpmi_cppc_write_reg_req {
u32 hart_id;
u32 reg_id;
u32 data_lo;
u32 data_hi;
};
struct rpmi_cppc_write_reg_resp {
s32 status;
};
struct rpmi_cppc_get_fastchan_offset_req {
u32 hart_id;
};
struct rpmi_cppc_get_fastchan_offset_resp {
s32 status;
u32 fc_perf_request_offset_lo;
u32 fc_perf_request_offset_hi;
u32 fc_perf_feedback_offset_lo;
u32 fc_perf_feedback_offset_hi;
};
#define RPMI_CPPC_FAST_CHANNEL_CPPC_MODE_POS 3
#define RPMI_CPPC_FAST_CHANNEL_CPPC_MODE_MASK \
(3U << RPMI_CPPC_FAST_CHANNEL_CPPC_MODE_POS)
#define RPMI_CPPC_FAST_CHANNEL_FLAGS_DB_WIDTH_POS 1
#define RPMI_CPPC_FAST_CHANNEL_FLAGS_DB_WIDTH_MASK \
(3U << RPMI_CPPC_FAST_CHANNEL_FLAGS_DB_WIDTH_POS)
#define RPMI_CPPC_FAST_CHANNEL_FLAGS_DB_SUPPORTED (1U << 0)
struct rpmi_cppc_get_fastchan_region_resp {
s32 status;
u32 flags;
u32 region_addr_lo;
u32 region_addr_hi;
u32 region_size_lo;
u32 region_size_hi;
u32 db_addr_lo;
u32 db_addr_hi;
u32 db_setmask_lo;
u32 db_setmask_hi;
u32 db_preservemask_lo;
u32 db_preservemask_hi;
};
enum rpmi_cppc_fast_channel_db_width {
RPMI_CPPC_FAST_CHANNEL_DB_WIDTH_8 = 0x0,
RPMI_CPPC_FAST_CHANNEL_DB_WIDTH_16 = 0x1,
RPMI_CPPC_FAST_CHANNEL_DB_WIDTH_32 = 0x2,
RPMI_CPPC_FAST_CHANNEL_DB_WIDTH_64 = 0x3,
};
enum rpmi_cppc_fast_channel_cppc_mode {
RPMI_CPPC_FAST_CHANNEL_CPPC_MODE_PASSIVE = 0x0,
RPMI_CPPC_FAST_CHANNEL_CPPC_MODE_ACTIVE = 0x1,
RPMI_CPPC_FAST_CHANNEL_CPPC_MODE_MAX_IDX,
};
struct rpmi_cppc_hart_list_req {
u32 start_index;
};
struct rpmi_cppc_hart_list_resp {
s32 status;
u32 remaining;
u32 returned;
/* remaining space need to be adjusted for the above 3 u32's */
u32 hartid[(RPMI_MSG_DATA_SIZE(RPMI_SLOT_SIZE_MIN) - (sizeof(u32) * 3)) / sizeof(u32)];
};
/** RPMI Clock ServiceGroup Service IDs */
enum rpmi_clock_service_id {
RPMI_CLOCK_SRV_ENABLE_NOTIFICATION = 0x01,
RPMI_CLOCK_SRV_GET_NUM_CLOCKS = 0x02,
RPMI_CLOCK_SRV_GET_ATTRIBUTES = 0x03,
RPMI_CLOCK_SRV_GET_SUPPORTED_RATES = 0x04,
RPMI_CLOCK_SRV_SET_CONFIG = 0x05,
RPMI_CLOCK_SRV_GET_CONFIG = 0x06,
RPMI_CLOCK_SRV_SET_RATE = 0x07,
RPMI_CLOCK_SRV_GET_RATE = 0x08,
RPMI_CLOCK_SRV_MAX_COUNT,
};
struct rpmi_clock_get_num_clocks_resp {
s32 status;
u32 num_clocks;
};
struct rpmi_clock_get_attributes_req {
u32 clock_id;
};
struct rpmi_clock_get_attributes_resp {
s32 status;
#define RPMI_CLOCK_FLAGS_FORMAT_POS 30
#define RPMI_CLOCK_FLAGS_FORMAT_MASK \
(3U << RPMI_CLOCK_FLAGS_CLOCK_FORMAT_POS)
#define RPMI_CLOCK_FLAGS_FORMAT_DISCRETE 0
#define RPMI_CLOCK_FLAGS_FORMAT_LINEAR 1
u32 flags;
u32 num_rates;
u32 transition_latency;
u8 name[16];
};
struct rpmi_clock_get_supported_rates_req {
u32 clock_id;
u32 clock_rate_index;
};
struct rpmi_clock_get_supported_rates_resp {
s32 status;
u32 flags;
u32 remaining;
u32 returned;
u32 clock_rate[0];
};
struct rpmi_clock_set_config_req {
u32 clock_id;
#define RPMI_CLOCK_CONFIG_ENABLE (1U << 0)
u32 config;
};
struct rpmi_clock_set_config_resp {
s32 status;
};
struct rpmi_clock_get_config_req {
u32 clock_id;
};
struct rpmi_clock_get_config_resp {
s32 status;
u32 config;
};
struct rpmi_clock_set_rate_req {
u32 clock_id;
#define RPMI_CLOCK_SET_RATE_FLAGS_MASK (3U << 0)
#define RPMI_CLOCK_SET_RATE_FLAGS_ROUND_DOWN 0
#define RPMI_CLOCK_SET_RATE_FLAGS_ROUND_UP 1
#define RPMI_CLOCK_SET_RATE_FLAGS_ROUND_PLAT 2
u32 flags;
u32 clock_rate_low;
u32 clock_rate_high;
};
struct rpmi_clock_set_rate_resp {
s32 status;
};
struct rpmi_clock_get_rate_req {
u32 clock_id;
};
struct rpmi_clock_get_rate_resp {
s32 status;
u32 clock_rate_low;
u32 clock_rate_high;
};
#endif /* !__RPMI_MSGPROT_H__ */

View File

@@ -0,0 +1,26 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Ventana Micro Systems Inc.
*
* Authors:
* Anup Patel <apatel@ventanamicro.com>
*/
#ifndef __FDT_MPXY_H__
#define __FDT_MPXY_H__
#include <sbi/sbi_types.h>
#include <sbi_utils/fdt/fdt_driver.h>
#ifdef CONFIG_FDT_MPXY
void fdt_mpxy_init(const void *fdt);
#else
static inline void fdt_mpxy_init(const void *fdt) { }
#endif
#endif

View File

@@ -10,22 +10,16 @@
#ifndef __FDT_REGMAP_H__
#define __FDT_REGMAP_H__
#include <sbi_utils/fdt/fdt_driver.h>
#include <sbi_utils/regmap/regmap.h>
struct fdt_phandle_args;
/** FDT based regmap driver */
struct fdt_regmap {
const struct fdt_match *match_table;
int (*init)(void *fdt, int nodeoff, u32 phandle,
const struct fdt_match *match);
};
/** Get regmap instance based on phandle */
int fdt_regmap_get_by_phandle(void *fdt, u32 phandle,
int fdt_regmap_get_by_phandle(const void *fdt, u32 phandle,
struct regmap **out_rmap);
/** Get regmap instance based on "regmap' property of the specified DT node */
int fdt_regmap_get(void *fdt, int nodeoff, struct regmap **out_rmap);
/** Get regmap instance based on "regmap" property of the specified DT node */
int fdt_regmap_get(const void *fdt, int nodeoff, struct regmap **out_rmap);
#endif

View File

@@ -11,33 +11,20 @@
#define __FDT_RESET_H__
#include <sbi/sbi_types.h>
struct fdt_reset {
const struct fdt_match *match_table;
int (*init)(void *fdt, int nodeoff, const struct fdt_match *match);
};
#include <sbi_utils/fdt/fdt_driver.h>
#ifdef CONFIG_FDT_RESET
/**
* fdt_reset_driver_init() - initialize reset driver based on the device-tree
*/
int fdt_reset_driver_init(void *fdt, struct fdt_reset *drv);
/**
* fdt_reset_init() - initialize reset drivers based on the device-tree
*
* This function shall be invoked in final init.
*/
void fdt_reset_init(void);
void fdt_reset_init(const void *fdt);
#else
static inline int fdt_reset_driver_init(void *fdt, struct fdt_reset *drv)
{
return 0;
}
static inline void fdt_reset_init(void) { }
static inline void fdt_reset_init(const void *fdt) { }
#endif

View File

@@ -11,19 +11,15 @@
#define __FDT_SERIAL_H__
#include <sbi/sbi_types.h>
#include <sbi_utils/fdt/fdt_driver.h>
#ifdef CONFIG_FDT_SERIAL
struct fdt_serial {
const struct fdt_match *match_table;
int (*init)(void *fdt, int nodeoff, const struct fdt_match *match);
};
int fdt_serial_init(void);
int fdt_serial_init(const void *fdt);
#else
static inline int fdt_serial_init(void) { return 0; }
static inline int fdt_serial_init(const void *fdt) { return 0; }
#endif

View File

@@ -38,10 +38,10 @@ enum semihosting_open_mode {
#ifdef CONFIG_SERIAL_SEMIHOSTING
int semihosting_init(void);
int semihosting_enabled(void);
bool semihosting_enabled(void);
#else
static inline int semihosting_init(void) { return SBI_ENODEV; }
static inline int semihosting_enabled(void) { return 0; }
static inline bool semihosting_enabled(void) { return false; }
#endif
#endif

View File

@@ -0,0 +1,26 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Ventana Micro Systems Inc.
*
* Authors:
* Anup Patel <apatel@ventanamicro.com>
*/
#ifndef __FDT_SUSPEND_H__
#define __FDT_SUSPEND_H__
#include <sbi/sbi_types.h>
#include <sbi_utils/fdt/fdt_driver.h>
#ifdef CONFIG_FDT_SUSPEND
void fdt_suspend_init(const void *fdt);
#else
static inline void fdt_suspend_init(const void *fdt) { }
#endif
#endif

View File

@@ -47,8 +47,6 @@ void aclint_mtimer_sync(struct aclint_mtimer_data *mt);
void aclint_mtimer_set_reference(struct aclint_mtimer_data *mt,
struct aclint_mtimer_data *ref);
int aclint_mtimer_warm_init(void);
int aclint_mtimer_cold_init(struct aclint_mtimer_data *mt,
struct aclint_mtimer_data *reference);

View File

@@ -24,6 +24,5 @@ struct plmt_data {
};
int plmt_cold_timer_init(struct plmt_data *plmt);
int plmt_warm_timer_init(void);
#endif /* __TIMER_ANDES_PLMT_H__ */

View File

@@ -11,24 +11,15 @@
#define __FDT_TIMER_H__
#include <sbi/sbi_types.h>
#include <sbi_utils/fdt/fdt_driver.h>
#ifdef CONFIG_FDT_TIMER
struct fdt_timer {
const struct fdt_match *match_table;
int (*cold_init)(void *fdt, int nodeoff, const struct fdt_match *match);
int (*warm_init)(void);
void (*exit)(void);
};
void fdt_timer_exit(void);
int fdt_timer_init(bool cold_boot);
int fdt_timer_init(void);
#else
static inline void fdt_timer_exit(void) { }
static inline int fdt_timer_init(bool cold_boot) { return 0; }
static inline int fdt_timer_init(void) { return 0; }
#endif

View File

@@ -1,6 +1,10 @@
# SPDX-License-Identifier: BSD-2-Clause
menu "SBI Extension Support"
menu "Generic SBI Support"
config CONSOLE_EARLY_BUFFER_SIZE
int "Early console buffer size (bytes)"
default 256
config SBI_ECALL_TIME
bool "Timer extension"
@@ -38,6 +42,10 @@ config SBI_ECALL_CPPC
bool "CPPC extension"
default y
config SBI_ECALL_FWFT
bool "Firmware Feature extension"
default y
config SBI_ECALL_LEGACY
bool "SBI v0.1 legacy extensions"
default y
@@ -46,4 +54,19 @@ config SBI_ECALL_VENDOR
bool "Platform-defined vendor extensions"
default y
config SBI_ECALL_DBTR
bool "Debug Trigger Extension"
default y
config SBIUNIT
bool "Enable SBIUNIT tests"
default n
config SBI_ECALL_SSE
bool "SSE extension"
default y
config SBI_ECALL_MPXY
bool "MPXY extension"
default y
endmenu

View File

@@ -13,7 +13,7 @@ libsbi-objs-y += riscv_hardfp.o
libsbi-objs-y += riscv_locks.o
libsbi-objs-y += sbi_ecall.o
libsbi-objs-y += sbi_ecall_exts.o
libsbi-objs-y += sbi_ecall_exts.carray.o
# The order of below extensions is performance optimized
carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_TIME) += ecall_time
@@ -46,18 +46,34 @@ libsbi-objs-$(CONFIG_SBI_ECALL_DBCN) += sbi_ecall_dbcn.o
carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_CPPC) += ecall_cppc
libsbi-objs-$(CONFIG_SBI_ECALL_CPPC) += sbi_ecall_cppc.o
carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_FWFT) += ecall_fwft
libsbi-objs-$(CONFIG_SBI_ECALL_FWFT) += sbi_ecall_fwft.o
carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_LEGACY) += ecall_legacy
libsbi-objs-$(CONFIG_SBI_ECALL_LEGACY) += sbi_ecall_legacy.o
carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_VENDOR) += ecall_vendor
libsbi-objs-$(CONFIG_SBI_ECALL_VENDOR) += sbi_ecall_vendor.o
carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_DBTR) += ecall_dbtr
libsbi-objs-$(CONFIG_SBI_ECALL_DBTR) += sbi_ecall_dbtr.o
carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_SSE) += ecall_sse
libsbi-objs-$(CONFIG_SBI_ECALL_SSE) += sbi_ecall_sse.o
carray-sbi_ecall_exts-$(CONFIG_SBI_ECALL_MPXY) += ecall_mpxy
libsbi-objs-$(CONFIG_SBI_ECALL_MPXY) += sbi_ecall_mpxy.o
libsbi-objs-y += sbi_bitmap.o
libsbi-objs-y += sbi_bitops.o
libsbi-objs-y += sbi_console.o
libsbi-objs-y += sbi_domain_context.o
libsbi-objs-y += sbi_domain_data.o
libsbi-objs-y += sbi_domain.o
libsbi-objs-y += sbi_double_trap.o
libsbi-objs-y += sbi_emulate_csr.o
libsbi-objs-y += sbi_fifo.o
libsbi-objs-y += sbi_fwft.o
libsbi-objs-y += sbi_hart.o
libsbi-objs-y += sbi_heap.o
libsbi-objs-y += sbi_math.o
@@ -67,15 +83,19 @@ libsbi-objs-y += sbi_illegal_insn.o
libsbi-objs-y += sbi_init.o
libsbi-objs-y += sbi_ipi.o
libsbi-objs-y += sbi_irqchip.o
libsbi-objs-y += sbi_misaligned_ldst.o
libsbi-objs-y += sbi_platform.o
libsbi-objs-y += sbi_pmu.o
libsbi-objs-y += sbi_dbtr.o
libsbi-objs-y += sbi_mpxy.o
libsbi-objs-y += sbi_scratch.o
libsbi-objs-y += sbi_sse.o
libsbi-objs-y += sbi_string.o
libsbi-objs-y += sbi_system.o
libsbi-objs-y += sbi_timer.o
libsbi-objs-y += sbi_tlb.o
libsbi-objs-y += sbi_trap.o
libsbi-objs-y += sbi_trap_ldst.o
libsbi-objs-y += sbi_trap_v_ldst.o
libsbi-objs-y += sbi_unpriv.o
libsbi-objs-y += sbi_expected_trap.o
libsbi-objs-y += sbi_cppc.o

View File

@@ -291,7 +291,8 @@ int is_pmp_entry_mapped(unsigned long entry)
unsigned long addr;
unsigned long log2len;
pmp_get(entry, &prot, &addr, &log2len);
if (pmp_get(entry, &prot, &addr, &log2len) != 0)
return false;
/* If address matching bits are non-zero, the entry is enable */
if (prot & PMP_A)

View File

@@ -9,6 +9,7 @@
#include <sbi/riscv_locks.h>
#include <sbi/sbi_console.h>
#include <sbi/sbi_fifo.h>
#include <sbi/sbi_hart.h>
#include <sbi/sbi_platform.h>
#include <sbi/sbi_scratch.h>
@@ -21,6 +22,15 @@ static char console_tbuf[CONSOLE_TBUF_MAX];
static u32 console_tbuf_len;
static spinlock_t console_out_lock = SPIN_LOCK_INITIALIZER;
#ifdef CONFIG_CONSOLE_EARLY_BUFFER_SIZE
#define CONSOLE_EARLY_BUFFER_SIZE CONFIG_CONSOLE_EARLY_BUFFER_SIZE
#else
#define CONSOLE_EARLY_BUFFER_SIZE 256
#endif
static char console_early_buffer[CONSOLE_EARLY_BUFFER_SIZE] = { 0 };
static SBI_FIFO_DEFINE(console_early_fifo, console_early_buffer, \
CONSOLE_EARLY_BUFFER_SIZE, sizeof(char));
bool sbi_isprintable(char c)
{
if (((31 < c) && (c < 127)) || (c == '\f') || (c == '\r') ||
@@ -39,6 +49,7 @@ int sbi_getc(void)
static unsigned long nputs(const char *str, unsigned long len)
{
char ch;
unsigned long i;
if (console_dev) {
@@ -51,6 +62,11 @@ static unsigned long nputs(const char *str, unsigned long len)
console_dev->console_putc(str[i]);
}
}
} else {
for (i = 0; i < len; i++) {
ch = str[i];
sbi_fifo_enqueue(&console_early_fifo, &ch, true);
}
}
return len;
}
@@ -472,19 +488,19 @@ const struct sbi_console_device *sbi_console_get_device(void)
void sbi_console_set_device(const struct sbi_console_device *dev)
{
if (!dev || console_dev)
char ch;
bool flush_early_fifo = false;
if (!dev)
return;
if (!console_dev)
flush_early_fifo = true;
console_dev = dev;
if (flush_early_fifo) {
while (!sbi_fifo_dequeue(&console_early_fifo, &ch))
sbi_putc(ch);
}
int sbi_console_init(struct sbi_scratch *scratch)
{
int rc = sbi_platform_console_init(sbi_platform_ptr(scratch));
/* console is not a necessary device */
if (rc == SBI_ENODEV)
return 0;
return rc;
}

710
lib/sbi/sbi_dbtr.c Normal file
View File

@@ -0,0 +1,710 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2023 Ventana Micro Systems, Inc.
*
* Author(s):
* Himanshu Chauhan <hchauhan@ventanamicro.com>
*/
#include <sbi/sbi_ecall_interface.h>
#include <sbi/sbi_csr_detect.h>
#include <sbi/sbi_platform.h>
#include <sbi/sbi_byteorder.h>
#include <sbi/sbi_console.h>
#include <sbi/sbi_domain.h>
#include <sbi/sbi_trap.h>
#include <sbi/sbi_dbtr.h>
#include <sbi/sbi_heap.h>
#include <sbi/riscv_encoding.h>
#include <sbi/riscv_asm.h>
/** Offset of pointer to HART's debug triggers info in scratch space */
static unsigned long hart_state_ptr_offset;
#define dbtr_get_hart_state_ptr(__scratch) \
sbi_scratch_read_type((__scratch), void *, hart_state_ptr_offset)
#define dbtr_thishart_state_ptr() \
dbtr_get_hart_state_ptr(sbi_scratch_thishart_ptr())
#define dbtr_set_hart_state_ptr(__scratch, __hart_state) \
sbi_scratch_write_type((__scratch), void *, hart_state_ptr_offset, \
(__hart_state))
#define INDEX_TO_TRIGGER(_index) \
({ \
struct sbi_dbtr_trigger *__trg = NULL; \
struct sbi_dbtr_hart_triggers_state *__hs = NULL; \
__hs = dbtr_get_hart_state_ptr(sbi_scratch_thishart_ptr()); \
__trg = &__hs->triggers[_index]; \
(__trg); \
})
#define for_each_trig_entry(_base, _max, _etype, _entry) \
for (int _idx = 0; _entry = ((_etype *)_base + _idx), \
_idx < _max; \
_idx++, _entry = ((_etype *)_base + _idx))
#define DBTR_SHMEM_MAKE_PHYS(_p_hi, _p_lo) (_p_lo)
/* must call with hs != NULL */
static inline bool sbi_dbtr_shmem_disabled(
struct sbi_dbtr_hart_triggers_state *hs)
{
return (hs->shmem.phys_lo == SBI_DBTR_SHMEM_INVALID_ADDR &&
hs->shmem.phys_hi == SBI_DBTR_SHMEM_INVALID_ADDR
? true : false);
}
/* must call with hs != NULL */
static inline void sbi_dbtr_disable_shmem(
struct sbi_dbtr_hart_triggers_state *hs)
{
hs->shmem.phys_lo = SBI_DBTR_SHMEM_INVALID_ADDR;
hs->shmem.phys_hi = SBI_DBTR_SHMEM_INVALID_ADDR;
}
/* must call with hs which is not disabled */
static inline void *hart_shmem_base(
struct sbi_dbtr_hart_triggers_state *hs)
{
return ((void *)(unsigned long)DBTR_SHMEM_MAKE_PHYS(
hs->shmem.phys_hi, hs->shmem.phys_lo));
}
static void sbi_trigger_init(struct sbi_dbtr_trigger *trig,
unsigned long type_mask, unsigned long idx)
{
trig->type_mask = type_mask;
trig->state = 0;
trig->tdata1 = 0;
trig->tdata2 = 0;
trig->tdata3 = 0;
trig->index = idx;
}
static inline struct sbi_dbtr_trigger *sbi_alloc_trigger(void)
{
int i;
struct sbi_dbtr_trigger *f_trig = NULL;
struct sbi_dbtr_hart_triggers_state *hart_state;
hart_state = dbtr_thishart_state_ptr();
if (!hart_state)
return NULL;
if (hart_state->available_trigs <= 0)
return NULL;
for (i = 0; i < hart_state->total_trigs; i++) {
f_trig = INDEX_TO_TRIGGER(i);
if (f_trig->state & RV_DBTR_BIT_MASK(TS, MAPPED))
continue;
hart_state->available_trigs--;
break;
}
if (i == hart_state->total_trigs)
return NULL;
__set_bit(RV_DBTR_BIT(TS, MAPPED), &f_trig->state);
return f_trig;
}
static inline void sbi_free_trigger(struct sbi_dbtr_trigger *trig)
{
struct sbi_dbtr_hart_triggers_state *hart_state;
if (trig == NULL)
return;
hart_state = dbtr_thishart_state_ptr();
if (!hart_state)
return;
trig->state = 0;
trig->tdata1 = 0;
trig->tdata2 = 0;
trig->tdata3 = 0;
hart_state->available_trigs++;
}
int sbi_dbtr_init(struct sbi_scratch *scratch, bool coldboot)
{
struct sbi_trap_info trap = {0};
unsigned long tdata1;
unsigned long val;
int i;
struct sbi_dbtr_hart_triggers_state *hart_state = NULL;
if (!sbi_hart_has_extension(scratch, SBI_HART_EXT_SDTRIG))
return SBI_SUCCESS;
if (coldboot) {
hart_state_ptr_offset = sbi_scratch_alloc_type_offset(void *);
if (!hart_state_ptr_offset)
return SBI_ENOMEM;
}
hart_state = dbtr_get_hart_state_ptr(scratch);
if (!hart_state) {
hart_state = sbi_zalloc(sizeof(*hart_state));
if (!hart_state)
return SBI_ENOMEM;
hart_state->hartid = current_hartid();
dbtr_set_hart_state_ptr(scratch, hart_state);
}
/* disable the shared memory */
sbi_dbtr_disable_shmem(hart_state);
/* Skip probing triggers if already probed */
if (hart_state->probed)
goto _probed;
for (i = 0; i < RV_MAX_TRIGGERS; i++) {
csr_write_allowed(CSR_TSELECT, &trap, i);
if (trap.cause)
break;
val = csr_read_allowed(CSR_TSELECT, &trap);
if (trap.cause)
break;
/*
* Read back tselect and check that it contains the
* written value
*/
if (val != i)
break;
val = csr_read_allowed(CSR_TINFO, &trap);
if (trap.cause) {
/*
* If reading tinfo caused an exception, the
* debugger must read tdata1 to discover the
* type.
*/
tdata1 = csr_read_allowed(CSR_TDATA1,
&trap);
if (trap.cause)
break;
if (TDATA1_GET_TYPE(tdata1) == 0)
break;
sbi_trigger_init(INDEX_TO_TRIGGER(i),
BIT(TDATA1_GET_TYPE(tdata1)),
i);
hart_state->total_trigs++;
} else {
if (val == 1)
break;
sbi_trigger_init(INDEX_TO_TRIGGER(i), val, i);
hart_state->total_trigs++;
}
}
hart_state->probed = 1;
_probed:
hart_state->available_trigs = hart_state->total_trigs;
return SBI_SUCCESS;
}
int sbi_dbtr_get_total_triggers(void)
{
struct sbi_dbtr_hart_triggers_state *hs;
struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
/*
* This function may be used during ecall registration.
* By that time the debug trigger module might not be
* initialized. If the extension is not supported, report
* number of triggers as 0.
*/
if (!sbi_hart_has_extension(scratch, SBI_HART_EXT_SDTRIG))
return 0;
hs = dbtr_thishart_state_ptr();
if (!hs)
return 0;
return hs->total_trigs;
}
int sbi_dbtr_setup_shmem(const struct sbi_domain *dom, unsigned long smode,
unsigned long shmem_phys_lo,
unsigned long shmem_phys_hi)
{
struct sbi_dbtr_hart_triggers_state *hart_state;
if (dom && !sbi_domain_is_assigned_hart(dom, current_hartindex())) {
sbi_dprintf("%s: calling hart not assigned to this domain\n",
__func__);
return SBI_ERR_DENIED;
}
hart_state = dbtr_thishart_state_ptr();
if (!hart_state)
return SBI_ERR_FAILED;
/* call is to disable shared memory */
if (shmem_phys_lo == SBI_DBTR_SHMEM_INVALID_ADDR
&& shmem_phys_hi == SBI_DBTR_SHMEM_INVALID_ADDR) {
sbi_dbtr_disable_shmem(hart_state);
return SBI_SUCCESS;
}
/* the shared memory must be disabled on this hart */
if (!sbi_dbtr_shmem_disabled(hart_state))
return SBI_ERR_ALREADY_AVAILABLE;
/* lower physical address must be XLEN/8 bytes aligned */
if (shmem_phys_lo & SBI_DBTR_SHMEM_ALIGN_MASK)
return SBI_ERR_INVALID_PARAM;
/*
* On RV32, the M-mode can only access the first 4GB of
* the physical address space because M-mode does not have
* MMU to access full 34-bit physical address space.
* So fail if the upper 32 bits of the physical address
* is non-zero on RV32.
*
* On RV64, kernel sets upper 64bit address part to zero.
* So fail if the upper 64bit of the physical address
* is non-zero on RV64.
*/
if (shmem_phys_hi)
return SBI_EINVALID_ADDR;
if (dom && !sbi_domain_check_addr(dom,
DBTR_SHMEM_MAKE_PHYS(shmem_phys_hi, shmem_phys_lo), smode,
SBI_DOMAIN_READ | SBI_DOMAIN_WRITE))
return SBI_ERR_INVALID_ADDRESS;
hart_state->shmem.phys_lo = shmem_phys_lo;
hart_state->shmem.phys_hi = shmem_phys_hi;
return SBI_SUCCESS;
}
static void dbtr_trigger_setup(struct sbi_dbtr_trigger *trig,
struct sbi_dbtr_data_msg *recv)
{
unsigned long tdata1;
if (!trig)
return;
trig->tdata1 = lle_to_cpu(recv->tdata1);
trig->tdata2 = lle_to_cpu(recv->tdata2);
trig->tdata3 = lle_to_cpu(recv->tdata3);
tdata1 = lle_to_cpu(recv->tdata1);
trig->state = 0;
__set_bit(RV_DBTR_BIT(TS, MAPPED), &trig->state);
SET_TRIG_HW_INDEX(trig->state, trig->index);
switch (TDATA1_GET_TYPE(tdata1)) {
case RISCV_DBTR_TRIG_MCONTROL:
if (__test_bit(RV_DBTR_BIT(MC, U), &tdata1))
__set_bit(RV_DBTR_BIT(TS, U), &trig->state);
if (__test_bit(RV_DBTR_BIT(MC, S), &tdata1))
__set_bit(RV_DBTR_BIT(TS, S), &trig->state);
break;
case RISCV_DBTR_TRIG_MCONTROL6:
if (__test_bit(RV_DBTR_BIT(MC6, U), &tdata1))
__set_bit(RV_DBTR_BIT(TS, U), &trig->state);
if (__test_bit(RV_DBTR_BIT(MC6, S), &tdata1))
__set_bit(RV_DBTR_BIT(TS, S), &trig->state);
if (__test_bit(RV_DBTR_BIT(MC6, VU), &tdata1))
__set_bit(RV_DBTR_BIT(TS, VU), &trig->state);
if (__test_bit(RV_DBTR_BIT(MC6, VS), &tdata1))
__set_bit(RV_DBTR_BIT(TS, VS), &trig->state);
break;
default:
sbi_dprintf("%s: Unknown type (tdata1: 0x%lx Type: %ld)\n",
__func__, tdata1, TDATA1_GET_TYPE(tdata1));
break;
}
}
static inline void update_bit(unsigned long new, int nr, volatile unsigned long *addr)
{
if (new)
__set_bit(nr, addr);
else
__clear_bit(nr, addr);
}
static void dbtr_trigger_enable(struct sbi_dbtr_trigger *trig)
{
unsigned long state;
unsigned long tdata1;
if (!trig || !(trig->state & RV_DBTR_BIT_MASK(TS, MAPPED)))
return;
state = trig->state;
tdata1 = trig->tdata1;
switch (TDATA1_GET_TYPE(tdata1)) {
case RISCV_DBTR_TRIG_MCONTROL:
update_bit(state & RV_DBTR_BIT_MASK(TS, U),
RV_DBTR_BIT(MC, U), &trig->tdata1);
update_bit(state & RV_DBTR_BIT_MASK(TS, S),
RV_DBTR_BIT(MC, S), &trig->tdata1);
break;
case RISCV_DBTR_TRIG_MCONTROL6:
update_bit(state & RV_DBTR_BIT_MASK(TS, VU),
RV_DBTR_BIT(MC6, VU), &trig->tdata1);
update_bit(state & RV_DBTR_BIT_MASK(TS, VS),
RV_DBTR_BIT(MC6, VS), &trig->tdata1);
update_bit(state & RV_DBTR_BIT_MASK(TS, U),
RV_DBTR_BIT(MC6, U), &trig->tdata1);
update_bit(state & RV_DBTR_BIT_MASK(TS, S),
RV_DBTR_BIT(MC6, S), &trig->tdata1);
break;
default:
break;
}
/*
* RISC-V Debug Support v1.0.0 section 5.5:
* Debugger cannot simply set a trigger by writing tdata1, then tdata2,
* etc. The current value of tdata2 might not be legal with the new
* value of tdata1. To help with this situation, it is guaranteed that
* writing 0 to tdata1 disables the trigger, and leaves it in a state
* where tdata2 and tdata3 can be written with any value that makes
* sense for any trigger type supported by this trigger.
*/
csr_write(CSR_TSELECT, trig->index);
csr_write(CSR_TDATA1, 0x0);
csr_write(CSR_TDATA2, trig->tdata2);
csr_write(CSR_TDATA1, trig->tdata1);
}
static void dbtr_trigger_disable(struct sbi_dbtr_trigger *trig)
{
unsigned long tdata1;
if (!trig || !(trig->state & RV_DBTR_BIT_MASK(TS, MAPPED)))
return;
tdata1 = trig->tdata1;
switch (TDATA1_GET_TYPE(tdata1)) {
case RISCV_DBTR_TRIG_MCONTROL:
__clear_bit(RV_DBTR_BIT(MC, U), &trig->tdata1);
__clear_bit(RV_DBTR_BIT(MC, S), &trig->tdata1);
break;
case RISCV_DBTR_TRIG_MCONTROL6:
__clear_bit(RV_DBTR_BIT(MC6, VU), &trig->tdata1);
__clear_bit(RV_DBTR_BIT(MC6, VS), &trig->tdata1);
__clear_bit(RV_DBTR_BIT(MC6, U), &trig->tdata1);
__clear_bit(RV_DBTR_BIT(MC6, S), &trig->tdata1);
break;
default:
break;
}
csr_write(CSR_TSELECT, trig->index);
csr_write(CSR_TDATA1, trig->tdata1);
}
static void dbtr_trigger_clear(struct sbi_dbtr_trigger *trig)
{
if (!trig || !(trig->state & RV_DBTR_BIT_MASK(TS, MAPPED)))
return;
csr_write(CSR_TSELECT, trig->index);
csr_write(CSR_TDATA1, 0x0);
csr_write(CSR_TDATA2, 0x0);
}
static int dbtr_trigger_supported(unsigned long type)
{
switch (type) {
case RISCV_DBTR_TRIG_MCONTROL:
case RISCV_DBTR_TRIG_MCONTROL6:
return 1;
default:
break;
}
return 0;
}
static int dbtr_trigger_valid(unsigned long type, unsigned long tdata)
{
switch (type) {
case RISCV_DBTR_TRIG_MCONTROL:
if (!(tdata & RV_DBTR_BIT_MASK(MC, DMODE)) &&
!(tdata & RV_DBTR_BIT_MASK(MC, M)))
return 1;
break;
case RISCV_DBTR_TRIG_MCONTROL6:
if (!(tdata & RV_DBTR_BIT_MASK(MC6, DMODE)) &&
!(tdata & RV_DBTR_BIT_MASK(MC6, M)))
return 1;
break;
default:
break;
}
return 0;
}
int sbi_dbtr_num_trig(unsigned long data, unsigned long *out)
{
unsigned long type = TDATA1_GET_TYPE(data);
u32 hartid = current_hartid();
unsigned long total = 0;
struct sbi_dbtr_trigger *trig;
int i;
struct sbi_dbtr_hart_triggers_state *hs;
hs = dbtr_thishart_state_ptr();
if (!hs)
return SBI_ERR_FAILED;
if (data == 0) {
*out = hs->total_trigs;
return SBI_SUCCESS;
}
for (i = 0; i < hs->total_trigs; i++) {
trig = INDEX_TO_TRIGGER(i);
if (__test_bit(type, &trig->type_mask))
total++;
}
sbi_dprintf("%s: hart%d: total triggers of type %lu: %lu\n",
__func__, hartid, type, total);
*out = total;
return SBI_SUCCESS;
}
int sbi_dbtr_read_trig(unsigned long smode,
unsigned long trig_idx_base, unsigned long trig_count)
{
struct sbi_dbtr_data_msg *xmit;
struct sbi_dbtr_trigger *trig;
struct sbi_dbtr_shmem_entry *entry;
void *shmem_base = NULL;
struct sbi_dbtr_hart_triggers_state *hs = NULL;
hs = dbtr_thishart_state_ptr();
if (!hs)
return SBI_ERR_FAILED;
if (trig_idx_base >= hs->total_trigs ||
trig_idx_base + trig_count >= hs->total_trigs)
return SBI_ERR_INVALID_PARAM;
if (sbi_dbtr_shmem_disabled(hs))
return SBI_ERR_NO_SHMEM;
shmem_base = hart_shmem_base(hs);
for_each_trig_entry(shmem_base, trig_count, typeof(*entry), entry) {
sbi_hart_map_saddr((unsigned long)entry, sizeof(*entry));
xmit = &entry->data;
trig = INDEX_TO_TRIGGER((_idx + trig_idx_base));
xmit->tstate = cpu_to_lle(trig->state);
xmit->tdata1 = cpu_to_lle(trig->tdata1);
xmit->tdata2 = cpu_to_lle(trig->tdata2);
xmit->tdata3 = cpu_to_lle(trig->tdata3);
sbi_hart_unmap_saddr();
}
return SBI_SUCCESS;
}
int sbi_dbtr_install_trig(unsigned long smode,
unsigned long trig_count, unsigned long *out)
{
void *shmem_base = NULL;
struct sbi_dbtr_shmem_entry *entry;
struct sbi_dbtr_data_msg *recv;
struct sbi_dbtr_id_msg *xmit;
unsigned long ctrl;
struct sbi_dbtr_trigger *trig;
struct sbi_dbtr_hart_triggers_state *hs = NULL;
hs = dbtr_thishart_state_ptr();
if (!hs)
return SBI_ERR_FAILED;
if (sbi_dbtr_shmem_disabled(hs))
return SBI_ERR_NO_SHMEM;
shmem_base = hart_shmem_base(hs);
/* Check requested triggers configuration */
for_each_trig_entry(shmem_base, trig_count, typeof(*entry), entry) {
sbi_hart_map_saddr((unsigned long)entry, sizeof(*entry));
recv = (struct sbi_dbtr_data_msg *)(&entry->data);
ctrl = recv->tdata1;
if (!dbtr_trigger_supported(TDATA1_GET_TYPE(ctrl))) {
*out = _idx;
sbi_hart_unmap_saddr();
return SBI_ERR_FAILED;
}
if (!dbtr_trigger_valid(TDATA1_GET_TYPE(ctrl), ctrl)) {
*out = _idx;
sbi_hart_unmap_saddr();
return SBI_ERR_FAILED;
}
sbi_hart_unmap_saddr();
}
if (hs->available_trigs < trig_count) {
*out = hs->available_trigs;
return SBI_ERR_FAILED;
}
/* Install triggers */
for_each_trig_entry(shmem_base, trig_count, typeof(*entry), entry) {
/*
* Since we have already checked if enough triggers are
* available, trigger allocation must succeed.
*/
trig = sbi_alloc_trigger();
sbi_hart_map_saddr((unsigned long)entry, sizeof(*entry));
recv = (struct sbi_dbtr_data_msg *)(&entry->data);
xmit = (struct sbi_dbtr_id_msg *)(&entry->id);
dbtr_trigger_setup(trig, recv);
dbtr_trigger_enable(trig);
xmit->idx = cpu_to_lle(trig->index);
sbi_hart_unmap_saddr();
}
return SBI_SUCCESS;
}
int sbi_dbtr_uninstall_trig(unsigned long trig_idx_base,
unsigned long trig_idx_mask)
{
unsigned long trig_mask = trig_idx_mask << trig_idx_base;
unsigned long idx = trig_idx_base;
struct sbi_dbtr_trigger *trig;
struct sbi_dbtr_hart_triggers_state *hs;
hs = dbtr_thishart_state_ptr();
if (!hs)
return SBI_ERR_FAILED;
for_each_set_bit_from(idx, &trig_mask, hs->total_trigs) {
trig = INDEX_TO_TRIGGER(idx);
if (!(trig->state & RV_DBTR_BIT_MASK(TS, MAPPED)))
return SBI_ERR_INVALID_PARAM;
dbtr_trigger_clear(trig);
sbi_free_trigger(trig);
}
return SBI_SUCCESS;
}
int sbi_dbtr_enable_trig(unsigned long trig_idx_base,
unsigned long trig_idx_mask)
{
unsigned long trig_mask = trig_idx_mask << trig_idx_base;
unsigned long idx = trig_idx_base;
struct sbi_dbtr_trigger *trig;
struct sbi_dbtr_hart_triggers_state *hs;
hs = dbtr_thishart_state_ptr();
if (!hs)
return SBI_ERR_FAILED;
for_each_set_bit_from(idx, &trig_mask, hs->total_trigs) {
trig = INDEX_TO_TRIGGER(idx);
sbi_dprintf("%s: enable trigger %lu\n", __func__, idx);
dbtr_trigger_enable(trig);
}
return SBI_SUCCESS;
}
int sbi_dbtr_update_trig(unsigned long smode,
unsigned long trig_idx_base,
unsigned long trig_idx_mask)
{
unsigned long trig_mask = trig_idx_mask << trig_idx_base;
unsigned long idx = trig_idx_base;
struct sbi_dbtr_data_msg *recv;
unsigned long uidx = 0;
struct sbi_dbtr_trigger *trig;
struct sbi_dbtr_shmem_entry *entry;
void *shmem_base = NULL;
struct sbi_dbtr_hart_triggers_state *hs = NULL;
hs = dbtr_thishart_state_ptr();
if (!hs)
return SBI_ERR_FAILED;
if (sbi_dbtr_shmem_disabled(hs))
return SBI_ERR_NO_SHMEM;
shmem_base = hart_shmem_base(hs);
for_each_set_bit_from(idx, &trig_mask, hs->total_trigs) {
trig = INDEX_TO_TRIGGER(idx);
if (!(trig->state & RV_DBTR_BIT_MASK(TS, MAPPED)))
return SBI_ERR_INVALID_PARAM;
entry = (shmem_base + uidx * sizeof(*entry));
recv = &entry->data;
trig->tdata2 = lle_to_cpu(recv->tdata2);
dbtr_trigger_enable(trig);
uidx++;
}
return SBI_SUCCESS;
}
int sbi_dbtr_disable_trig(unsigned long trig_idx_base,
unsigned long trig_idx_mask)
{
unsigned long trig_mask = trig_idx_mask << trig_idx_base;
unsigned long idx = trig_idx_base;
struct sbi_dbtr_trigger *trig;
struct sbi_dbtr_hart_triggers_state *hs;
hs = dbtr_thishart_state_ptr();
if (!hs)
return SBI_ERR_FAILED;
for_each_set_bit_from(idx, &trig_mask, hs->total_trigs) {
trig = INDEX_TO_TRIGGER(idx);
dbtr_trigger_disable(trig);
}
return SBI_SUCCESS;
}

View File

@@ -13,20 +13,18 @@
#include <sbi/sbi_hartmask.h>
#include <sbi/sbi_heap.h>
#include <sbi/sbi_hsm.h>
#include <sbi/sbi_list.h>
#include <sbi/sbi_math.h>
#include <sbi/sbi_platform.h>
#include <sbi/sbi_scratch.h>
#include <sbi/sbi_string.h>
/*
* We allocate an extra element because sbi_domain_for_each() expects
* the array to be null-terminated.
*/
struct sbi_domain *domidx_to_domain_table[SBI_DOMAIN_MAX_INDEX + 1] = { 0 };
SBI_LIST_HEAD(domain_list);
static u32 domain_count = 0;
static bool domain_finalized = false;
#define ROOT_REGION_MAX 16
#define ROOT_REGION_MAX 32
static u32 root_memregs_count = 0;
struct sbi_domain root = {
@@ -51,7 +49,7 @@ struct sbi_domain *sbi_hartindex_to_domain(u32 hartindex)
return sbi_scratch_read_type(scratch, void *, domain_hart_ptr_offset);
}
static void update_hartindex_to_domain(u32 hartindex, struct sbi_domain *dom)
void sbi_update_hartindex_to_domain(u32 hartindex, struct sbi_domain *dom)
{
struct sbi_scratch *scratch;
@@ -62,23 +60,36 @@ static void update_hartindex_to_domain(u32 hartindex, struct sbi_domain *dom)
sbi_scratch_write_type(scratch, void *, domain_hart_ptr_offset, dom);
}
bool sbi_domain_is_assigned_hart(const struct sbi_domain *dom, u32 hartid)
bool sbi_domain_is_assigned_hart(const struct sbi_domain *dom, u32 hartindex)
{
if (dom)
return sbi_hartmask_test_hartid(hartid, &dom->assigned_harts);
bool ret;
struct sbi_domain *tdom = (struct sbi_domain *)dom;
if (!dom)
return false;
spin_lock(&tdom->assigned_harts_lock);
ret = sbi_hartmask_test_hartindex(hartindex, &tdom->assigned_harts);
spin_unlock(&tdom->assigned_harts_lock);
return ret;
}
ulong sbi_domain_get_assigned_hartmask(const struct sbi_domain *dom,
ulong hbase)
int sbi_domain_get_assigned_hartmask(const struct sbi_domain *dom,
struct sbi_hartmask *mask)
{
ulong ret = 0;
for (int i = 0; i < 8 * sizeof(ret); i++) {
if (sbi_domain_is_assigned_hart(dom, hbase + i))
ret |= 1UL << i;
struct sbi_domain *tdom = (struct sbi_domain *)dom;
if (!dom) {
sbi_hartmask_clear_all(mask);
return 0;
}
spin_lock(&tdom->assigned_harts_lock);
sbi_hartmask_copy(mask, &tdom->assigned_harts);
spin_unlock(&tdom->assigned_harts_lock);
return ret;
}
@@ -435,7 +446,7 @@ void sbi_domain_dump(const struct sbi_domain *dom, const char *suffix)
sbi_hartmask_for_each_hartindex(i, dom->possible_harts) {
j = sbi_hartindex_to_hartid(i);
sbi_printf("%s%d%s", (k++) ? "," : "",
j, sbi_domain_is_assigned_hart(dom, j) ? "*" : "");
j, sbi_domain_is_assigned_hart(dom, i) ? "*" : "");
}
sbi_printf("\n");
@@ -505,10 +516,9 @@ void sbi_domain_dump(const struct sbi_domain *dom, const char *suffix)
void sbi_domain_dump_all(const char *suffix)
{
u32 i;
const struct sbi_domain *dom;
sbi_domain_for_each(i, dom) {
sbi_domain_for_each(dom) {
sbi_domain_dump(dom, suffix);
sbi_printf("\n");
}
@@ -527,21 +537,11 @@ int sbi_domain_register(struct sbi_domain *dom,
return SBI_EINVAL;
/* Check if domain already discovered */
sbi_domain_for_each(i, tdom) {
sbi_domain_for_each(tdom) {
if (tdom == dom)
return SBI_EALREADY;
}
/*
* Ensure that we have room for Domain Index to
* HART ID mapping
*/
if (SBI_DOMAIN_MAX_INDEX <= domain_count) {
sbi_printf("%s: No room for %s\n",
__func__, dom->name);
return SBI_ENOSPC;
}
/* Sanitize discovered domain */
rc = sanitize_domain(dom);
if (rc) {
@@ -551,9 +551,13 @@ int sbi_domain_register(struct sbi_domain *dom,
return rc;
}
sbi_list_add_tail(&dom->node, &domain_list);
/* Assign index to domain */
dom->index = domain_count++;
domidx_to_domain_table[dom->index] = dom;
/* Initialize spinlock for dom->assigned_harts */
SPIN_LOCK_INIT(dom->assigned_harts_lock);
/* Clear assigned HARTs of domain */
sbi_hartmask_clear_all(&dom->assigned_harts);
@@ -567,7 +571,7 @@ int sbi_domain_register(struct sbi_domain *dom,
if (tdom)
sbi_hartmask_clear_hartindex(i,
&tdom->assigned_harts);
update_hartindex_to_domain(i, dom);
sbi_update_hartindex_to_domain(i, dom);
sbi_hartmask_set_hartindex(i, &dom->assigned_harts);
/*
@@ -582,10 +586,19 @@ int sbi_domain_register(struct sbi_domain *dom,
}
}
/* Setup data for the discovered domain */
rc = sbi_domain_setup_data(dom);
if (rc) {
sbi_printf("%s: domain data setup failed for %s (error %d)\n",
__func__, dom->name, rc);
sbi_list_del(&dom->node);
return rc;
}
return 0;
}
int sbi_domain_root_add_memregion(const struct sbi_domain_memregion *reg)
static int root_add_memregion(const struct sbi_domain_memregion *reg)
{
int rc;
bool reg_merged;
@@ -663,7 +676,7 @@ int sbi_domain_root_add_memrange(unsigned long addr, unsigned long size,
(end - pos) : align;
sbi_domain_memregion_init(pos, rsize, region_flags, &reg);
rc = sbi_domain_root_add_memregion(&reg);
rc = root_add_memregion(&reg);
if (rc)
return rc;
pos += rsize;
@@ -675,7 +688,7 @@ int sbi_domain_root_add_memrange(unsigned long addr, unsigned long size,
int sbi_domain_finalize(struct sbi_scratch *scratch, u32 cold_hartid)
{
int rc;
u32 i, dhart;
u32 dhart;
struct sbi_domain *dom;
const struct sbi_platform *plat = sbi_platform_ptr(scratch);
@@ -688,7 +701,7 @@ int sbi_domain_finalize(struct sbi_scratch *scratch, u32 cold_hartid)
}
/* Startup boot HART of domains */
sbi_domain_for_each(i, dom) {
sbi_domain_for_each(dom) {
/* Domain boot HART index */
dhart = sbi_hartid_to_hartindex(dom->boot_hartid);
@@ -701,8 +714,14 @@ int sbi_domain_finalize(struct sbi_scratch *scratch, u32 cold_hartid)
continue;
/* Ignore if boot HART assigned different domain */
if (sbi_hartindex_to_domain(dhart) != dom ||
!sbi_hartmask_test_hartindex(dhart, &dom->assigned_harts))
if (sbi_hartindex_to_domain(dhart) != dom)
continue;
/* Ignore if boot HART is not part of the assigned HARTs */
spin_lock(&dom->assigned_harts_lock);
rc = sbi_hartmask_test_hartindex(dhart, &dom->assigned_harts);
spin_unlock(&dom->assigned_harts_lock);
if (!rc)
continue;
/* Startup boot HART of domain */
@@ -742,6 +761,8 @@ int sbi_domain_init(struct sbi_scratch *scratch, u32 cold_hartid)
struct sbi_domain_memregion *root_memregs;
const struct sbi_platform *plat = sbi_platform_ptr(scratch);
SBI_INIT_LIST_HEAD(&domain_list);
if (scratch->fw_rw_offset == 0 ||
(scratch->fw_rw_offset & (scratch->fw_rw_offset - 1)) != 0) {
sbi_printf("%s: fw_rw_offset is not a power of 2 (0x%lx)\n",
@@ -759,11 +780,16 @@ int sbi_domain_init(struct sbi_scratch *scratch, u32 cold_hartid)
if (!domain_hart_ptr_offset)
return SBI_ENOMEM;
/* Initialize domain context support */
rc = sbi_domain_context_init();
if (rc)
goto fail_free_domain_hart_ptr_offset;
root_memregs = sbi_calloc(sizeof(*root_memregs), ROOT_REGION_MAX + 1);
if (!root_memregs) {
sbi_printf("%s: no memory for root regions\n", __func__);
rc = SBI_ENOMEM;
goto fail_free_domain_hart_ptr_offset;
goto fail_deinit_context;
}
root.regions = root_memregs;
@@ -828,6 +854,8 @@ fail_free_root_hmask:
sbi_free(root_hmask);
fail_free_root_memregs:
sbi_free(root_memregs);
fail_deinit_context:
sbi_domain_context_deinit();
fail_free_domain_hart_ptr_offset:
sbi_scratch_free_offset(domain_hart_ptr_offset);
return rc;

View File

@@ -0,0 +1,241 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) IPADS@SJTU 2023. All rights reserved.
*/
#include <sbi/sbi_error.h>
#include <sbi/riscv_locks.h>
#include <sbi/riscv_asm.h>
#include <sbi/sbi_console.h>
#include <sbi/sbi_hsm.h>
#include <sbi/sbi_hart.h>
#include <sbi/sbi_heap.h>
#include <sbi/sbi_scratch.h>
#include <sbi/sbi_string.h>
#include <sbi/sbi_domain.h>
#include <sbi/sbi_domain_context.h>
#include <sbi/sbi_trap.h>
/** Context representation for a hart within a domain */
struct hart_context {
/** Trap-related states such as GPRs, mepc, and mstatus */
struct sbi_trap_context trap_ctx;
/** Supervisor status register */
unsigned long sstatus;
/** Supervisor interrupt enable register */
unsigned long sie;
/** Supervisor trap vector base address register */
unsigned long stvec;
/** Supervisor scratch register for temporary storage */
unsigned long sscratch;
/** Supervisor exception program counter register */
unsigned long sepc;
/** Supervisor cause register */
unsigned long scause;
/** Supervisor trap value register */
unsigned long stval;
/** Supervisor interrupt pending register */
unsigned long sip;
/** Supervisor address translation and protection register */
unsigned long satp;
/** Counter-enable register */
unsigned long scounteren;
/** Supervisor environment configuration register */
unsigned long senvcfg;
/** Reference to the owning domain */
struct sbi_domain *dom;
/** Previous context (caller) to jump to during context exits */
struct hart_context *prev_ctx;
/** Is context initialized and runnable */
bool initialized;
};
struct domain_context_priv {
/** Contexts for possible HARTs indexed by hartindex */
struct hart_context *hartindex_to_context_table[SBI_HARTMASK_MAX_BITS];
};
static struct sbi_domain_data dcpriv = {
.data_size = sizeof(struct domain_context_priv),
};
static inline struct hart_context *hart_context_get(struct sbi_domain *dom,
u32 hartindex)
{
struct domain_context_priv *dcp = sbi_domain_data_ptr(dom, &dcpriv);
return (dcp && hartindex < SBI_HARTMASK_MAX_BITS) ?
dcp->hartindex_to_context_table[hartindex] : NULL;
}
static void hart_context_set(struct sbi_domain *dom, u32 hartindex,
struct hart_context *hc)
{
struct domain_context_priv *dcp = sbi_domain_data_ptr(dom, &dcpriv);
if (dcp && hartindex < SBI_HARTMASK_MAX_BITS)
dcp->hartindex_to_context_table[hartindex] = hc;
}
/** Macro to obtain the current hart's context pointer */
#define hart_context_thishart_get() \
hart_context_get(sbi_domain_thishart_ptr(), \
current_hartindex())
/**
* Switches the HART context from the current domain to the target domain.
* This includes changing domain assignments and reconfiguring PMP, as well
* as saving and restoring CSRs and trap states.
*
* @param ctx pointer to the current HART context
* @param dom_ctx pointer to the target domain context
*/
static void switch_to_next_domain_context(struct hart_context *ctx,
struct hart_context *dom_ctx)
{
u32 hartindex = current_hartindex();
struct sbi_trap_context *trap_ctx;
struct sbi_domain *current_dom = ctx->dom;
struct sbi_domain *target_dom = dom_ctx->dom;
struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
unsigned int pmp_count = sbi_hart_pmp_count(scratch);
/* Assign current hart to target domain */
spin_lock(&current_dom->assigned_harts_lock);
sbi_hartmask_clear_hartindex(hartindex, &current_dom->assigned_harts);
spin_unlock(&current_dom->assigned_harts_lock);
sbi_update_hartindex_to_domain(hartindex, target_dom);
spin_lock(&target_dom->assigned_harts_lock);
sbi_hartmask_set_hartindex(hartindex, &target_dom->assigned_harts);
spin_unlock(&target_dom->assigned_harts_lock);
/* Reconfigure PMP settings for the new domain */
for (int i = 0; i < pmp_count; i++) {
pmp_disable(i);
}
sbi_hart_pmp_configure(scratch);
/* Save current CSR context and restore target domain's CSR context */
ctx->sstatus = csr_swap(CSR_SSTATUS, dom_ctx->sstatus);
ctx->sie = csr_swap(CSR_SIE, dom_ctx->sie);
ctx->stvec = csr_swap(CSR_STVEC, dom_ctx->stvec);
ctx->sscratch = csr_swap(CSR_SSCRATCH, dom_ctx->sscratch);
ctx->sepc = csr_swap(CSR_SEPC, dom_ctx->sepc);
ctx->scause = csr_swap(CSR_SCAUSE, dom_ctx->scause);
ctx->stval = csr_swap(CSR_STVAL, dom_ctx->stval);
ctx->sip = csr_swap(CSR_SIP, dom_ctx->sip);
ctx->satp = csr_swap(CSR_SATP, dom_ctx->satp);
if (sbi_hart_priv_version(scratch) >= SBI_HART_PRIV_VER_1_10)
ctx->scounteren = csr_swap(CSR_SCOUNTEREN, dom_ctx->scounteren);
if (sbi_hart_priv_version(scratch) >= SBI_HART_PRIV_VER_1_12)
ctx->senvcfg = csr_swap(CSR_SENVCFG, dom_ctx->senvcfg);
/* Save current trap state and restore target domain's trap state */
trap_ctx = sbi_trap_get_context(scratch);
sbi_memcpy(&ctx->trap_ctx, trap_ctx, sizeof(*trap_ctx));
sbi_memcpy(trap_ctx, &dom_ctx->trap_ctx, sizeof(*trap_ctx));
/* Mark current context structure initialized because context saved */
ctx->initialized = true;
/* If target domain context is not initialized or runnable */
if (!dom_ctx->initialized) {
/* Startup boot HART of target domain */
if (current_hartid() == target_dom->boot_hartid)
sbi_hart_switch_mode(target_dom->boot_hartid,
target_dom->next_arg1,
target_dom->next_addr,
target_dom->next_mode,
false);
else
sbi_hsm_hart_stop(scratch, true);
}
}
int sbi_domain_context_enter(struct sbi_domain *dom)
{
struct hart_context *ctx = hart_context_thishart_get();
struct hart_context *dom_ctx = hart_context_get(dom, current_hartindex());
/* Validate the domain context existence */
if (!dom_ctx)
return SBI_EINVAL;
/* Update target context's previous context to indicate the caller */
dom_ctx->prev_ctx = ctx;
switch_to_next_domain_context(ctx, dom_ctx);
return 0;
}
int sbi_domain_context_exit(void)
{
u32 hartindex = current_hartindex();
struct sbi_domain *dom;
struct hart_context *ctx = hart_context_thishart_get();
struct hart_context *dom_ctx, *tmp;
/*
* If it's first time to call `exit` on the current hart, no
* context allocated before. Loop through each domain to allocate
* its context on the current hart if valid.
*/
if (!ctx) {
sbi_domain_for_each(dom) {
if (!sbi_hartmask_test_hartindex(hartindex,
dom->possible_harts))
continue;
dom_ctx = sbi_zalloc(sizeof(struct hart_context));
if (!dom_ctx)
return SBI_ENOMEM;
/* Bind context and domain */
dom_ctx->dom = dom;
hart_context_set(dom, hartindex, dom_ctx);
}
ctx = hart_context_thishart_get();
}
dom_ctx = ctx->prev_ctx;
/* If no previous caller context */
if (!dom_ctx) {
/* Try to find next uninitialized user-defined domain's context */
sbi_domain_for_each(dom) {
if (dom == &root || dom == sbi_domain_thishart_ptr())
continue;
tmp = hart_context_get(dom, hartindex);
if (tmp && !tmp->initialized) {
dom_ctx = tmp;
break;
}
}
}
/* Take the root domain context if fail to find */
if (!dom_ctx)
dom_ctx = hart_context_get(&root, hartindex);
switch_to_next_domain_context(ctx, dom_ctx);
return 0;
}
int sbi_domain_context_init(void)
{
return sbi_domain_register_data(&dcpriv);
}
void sbi_domain_context_deinit(void)
{
sbi_domain_unregister_data(&dcpriv);
}

138
lib/sbi/sbi_domain_data.c Normal file
View File

@@ -0,0 +1,138 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Ventana Micro Systems Inc.
*/
#include <sbi/sbi_bitmap.h>
#include <sbi/sbi_domain.h>
#include <sbi/sbi_error.h>
#include <sbi/sbi_heap.h>
static SBI_LIST_HEAD(data_list);
static DECLARE_BITMAP(data_idx_bmap, SBI_DOMAIN_MAX_DATA_PTRS);
void *sbi_domain_data_ptr(struct sbi_domain *dom, struct sbi_domain_data *data)
{
if (dom && data && data->data_idx < SBI_DOMAIN_MAX_DATA_PTRS)
return dom->data_priv.idx_to_data_ptr[data->data_idx];
return NULL;
}
static int domain_setup_data_one(struct sbi_domain *dom,
struct sbi_domain_data *data)
{
struct sbi_domain_data_priv *priv = &dom->data_priv;
void *data_ptr;
int rc;
if (priv->idx_to_data_ptr[data->data_idx])
return SBI_EALREADY;
data_ptr = sbi_zalloc(data->data_size);
if (!data_ptr) {
sbi_domain_cleanup_data(dom);
return SBI_ENOMEM;
}
if (data->data_setup) {
rc = data->data_setup(dom, data, data_ptr);
if (rc) {
sbi_free(data_ptr);
return rc;
}
}
priv->idx_to_data_ptr[data->data_idx] = data_ptr;
return 0;
}
static void domain_cleanup_data_one(struct sbi_domain *dom,
struct sbi_domain_data *data)
{
struct sbi_domain_data_priv *priv = &dom->data_priv;
void *data_ptr;
data_ptr = priv->idx_to_data_ptr[data->data_idx];
if (!data_ptr)
return;
if (data->data_cleanup)
data->data_cleanup(dom, data, data_ptr);
sbi_free(data_ptr);
priv->idx_to_data_ptr[data->data_idx] = NULL;
}
int sbi_domain_setup_data(struct sbi_domain *dom)
{
struct sbi_domain_data *data;
int rc;
if (!dom)
return SBI_EINVAL;
sbi_list_for_each_entry(data, &data_list, head) {
rc = domain_setup_data_one(dom, data);
if (rc) {
sbi_domain_cleanup_data(dom);
return rc;
}
}
return 0;
}
void sbi_domain_cleanup_data(struct sbi_domain *dom)
{
struct sbi_domain_data *data;
if (!dom)
return;
sbi_list_for_each_entry(data, &data_list, head)
domain_cleanup_data_one(dom, data);
}
int sbi_domain_register_data(struct sbi_domain_data *data)
{
struct sbi_domain *dom;
u32 data_idx;
int rc;
if (!data || !data->data_size)
return SBI_EINVAL;
for (data_idx = 0; data_idx < SBI_DOMAIN_MAX_DATA_PTRS; data_idx++) {
if (!bitmap_test(data_idx_bmap, data_idx))
break;
}
if (SBI_DOMAIN_MAX_DATA_PTRS <= data_idx)
return SBI_ENOSPC;
bitmap_set(data_idx_bmap, data_idx, 1);
data->data_idx = data_idx;
sbi_list_add_tail(&data->head, &data_list);
sbi_domain_for_each(dom) {
rc = domain_setup_data_one(dom, data);
if (rc) {
sbi_domain_unregister_data(data);
return rc;
}
}
return 0;
}
void sbi_domain_unregister_data(struct sbi_domain_data *data)
{
struct sbi_domain *dom;
sbi_domain_for_each(dom)
domain_cleanup_data_one(dom, data);
sbi_list_del(&data->head);
bitmap_clear(data_idx_bmap, data->data_idx, 1);
}

30
lib/sbi/sbi_double_trap.c Normal file
View File

@@ -0,0 +1,30 @@
/*
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2024 Rivos Inc.
*
* Authors:
* Clément Léger <clement.leger@rivosinc.com>
*/
#include <sbi/sbi_console.h>
#include <sbi/sbi_ecall_interface.h>
#include <sbi/sbi_error.h>
#include <sbi/sbi_sse.h>
#include <sbi/sbi_trap.h>
int sbi_double_trap_handler(struct sbi_trap_context *tcntx)
{
struct sbi_trap_regs *regs = &tcntx->regs;
const struct sbi_trap_info *trap = &tcntx->trap;
bool prev_virt = sbi_regs_from_virt(regs);
if (sbi_mstatus_prev_mode(regs->mstatus) != PRV_S)
return SBI_ERR_INVALID_PARAM;
/* Exception was taken in VS-mode, redirect it to S-mode */
if (prev_virt)
return sbi_trap_redirect(regs, trap);
return sbi_sse_inject_event(SBI_SSE_EVENT_LOCAL_DOUBLE_TRAP);
}

View File

@@ -11,10 +11,10 @@
#include <sbi/sbi_ecall.h>
#include <sbi/sbi_ecall_interface.h>
#include <sbi/sbi_error.h>
#include <sbi/sbi_string.h>
#include <sbi/sbi_trap.h>
extern struct sbi_ecall_extension *sbi_ecall_exts[];
extern unsigned long sbi_ecall_exts_size;
extern struct sbi_ecall_extension *const sbi_ecall_exts[];
u16 sbi_ecall_version_major(void)
{
@@ -54,6 +54,29 @@ struct sbi_ecall_extension *sbi_ecall_find_extension(unsigned long extid)
return ret;
}
void sbi_ecall_get_extensions_str(char *exts_str, int exts_str_size, bool experimental)
{
struct sbi_ecall_extension *t;
int offset = 0;
if (!exts_str || exts_str_size <= 0)
return;
sbi_memset(exts_str, 0, exts_str_size);
sbi_list_for_each_entry(t, &ecall_exts_list, head) {
if (experimental != t->experimental)
continue;
sbi_snprintf(exts_str + offset, exts_str_size - offset,
"%s,", t->name);
offset = offset + sbi_strlen(t->name) + 1;
}
if (offset)
exts_str[offset - 1] = '\0';
else
sbi_strncpy(exts_str, "none", exts_str_size);
}
int sbi_ecall_register_extension(struct sbi_ecall_extension *ext)
{
struct sbi_ecall_extension *t;
@@ -95,9 +118,10 @@ void sbi_ecall_unregister_extension(struct sbi_ecall_extension *ext)
sbi_list_del_init(&ext->head);
}
int sbi_ecall_handler(struct sbi_trap_regs *regs)
int sbi_ecall_handler(struct sbi_trap_context *tcntx)
{
int ret = 0;
struct sbi_trap_regs *regs = &tcntx->regs;
struct sbi_ecall_extension *ext;
unsigned long extension_id = regs->a7;
unsigned long func_id = regs->a6;
@@ -147,7 +171,7 @@ int sbi_ecall_init(void)
struct sbi_ecall_extension *ext;
unsigned long i;
for (i = 0; i < sbi_ecall_exts_size; i++) {
for (i = 0; sbi_ecall_exts[i]; i++) {
ext = sbi_ecall_exts[i];
ret = SBI_ENODEV;

Some files were not shown because too many files have changed in this diff Show More