Bare-metal GNU ld does not support PIE, so if using it this will result
in a failure to build. Instead, default to FW_PIC=n if not supported.
Note that an explicit FW_PIC=y is not overridden, to ensure the build
fails rather than silently producing a position-dependent binary.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When using Clang with a bare-metal triple, -pie does not get passed to
the linker as it's not normally a thing that makes sense, unlike GCC
which will unconditionally forward it on and potentially result in a
linker error. However, LLD does support it, and manually forwarding it
on works as desired, so do so to fully support FW_PIC with Clang and
LLD.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The -N linker option is supposed to make .text writable, but GNU ld and
LLD differ in interpreting what that means. GNU ld will happily let you
have relocations in it, but LLD will see that the input section is
read-only (even though the output section is writable) and give an
error. It's unclear if either of them intend to have that behaviour in
this edge case, but regardless there's no reason not to just put the
data in a writable .data section.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
These are mutually exclusive. GNU as and LLVM both let later binding
directives override earlier ones so this works as intended, but LLVM 12
turned this into a warning as there's no good reason to do such a thing
and could be a potential bug. Thus, remove the redundant and incorrect
.globl directive for fw_platform_init.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The sbi_pmu_exit() crashes on systems not having MCOUNTINHIBIT csr
so to fix this we check SBI_HART_HAS_MCOUNTINHIBIT feature in
sbi_pmu_exit() and do nothing if it is not available.
Fixes: 13d40f21d5 ("lib: sbi: Add PMU support")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Avoid using a magic number, instead use a macro for the version of
struct fw_dynamic_info.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The sanity checks on the magic and version was already done in
fw_boot_hart(), which happens before fw_save_info() is called.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
At present in the rendered platform guide, all instances of <xyz>
are missing. Use < and > to replace <> to make them visible.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Before entering _scratch_init(), register t3 already holds a copy
of the firmware end address, hence there is no need to calculate
it again. This reduces 3 instructions in each _scratch_init() loop.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Add PMU support for generic platform. Generic platform solely relies on
the device tree to parse all pmu related information. If any event is
not described in device tree, generic platform will not support it.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Follow the standard conventon for static function names:
All global functions should be start with sbi_<module name>_
All static functions should be start with <module name>_
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V SBI v0.3 specification defines a set of firmware events that can
provide additional information about the current firmware context. All
of the firmware event monitoring are enabled now. The firmware
events must be defined as raw perf event with MSB set as specified in the
specification.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V SBI specfication 0.3 defines a PMU extension that allows supervisor
mode to start/stop/configure pmu related events. This patch implements
all of the functionality defined in the specification.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The PMU DT node bindings are defined in docs/pmu_support.md
Add few fdt helper functions to parse the DT node and update the
event-counter mapping tables.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V SBI v0.3 specification defined a PMU extension to configure/start/stop
the hardware/firmware pmu events.
Implement PMU support in OpenSBI library. The implementation is agnostic of
event to counter mapping & mhpmevent value configuration. That means, it
expects platform hooks will be used to set up the mapping and provide
the mhpmevent value at runtime.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
A platform hook to initialize PMU allows platform vendors to provide
their own mechanism to define pmu event-counter mappings in addition
to the DT based approach.
Another platform hook that allows platform vendors customize the
final mhpmevent value configuration.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Currently, csr_read/write_num functions are used to read/write PMP related
CSRs where CSR value is decided at runtime. Expand this function to include
PMU related CSRs as well.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Currently, all bits in mcountern are enabled unconditionally at boot time.
With SBI PMU extension, all the programmable counters should enabled only
during performance monitoring for a particular event. However, this is done
only if mcountinhibit is implemented because the supervisor mode can not
start/stop any event without mcountinhibit.
Similarly, supervisor should take care enabling scounteren which allows
U-mode to access programmable pmu counters. All the non-programmable ones
(CY, TM, IR) should be enabled in M-mode because some userspace may rely on
builtins such as __builtin_readcyclecounter. Supervisor OS can still disable
them during initial configuration.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V privilege specification allows the implementation to have less
than 64 bits.
Add a function to detect the number of implemented bits in mhpmcounter
dynamically at runtime.
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V ISA specification v1.11 defined mcountinhibit CSR that allows
software to stop any counter from incrementing. The SBI PMU extension
depends on this CSR support in hardware.
Define mcountinhibit as a hart specific feature and detect it at runtime.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
SBI PMU extension requires a firmware to be aware of the event to
counter/mhpmevent mappings supported by the hardware. One approach
is to encode that information in the device tree.
Define a device tree binding that allows a hardware to describe
all the PMU mappings required in concise format.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
fw_platform_init() fills platform.name without considering the
ending null character. Fix it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
FW_PIC is on by default. Hence no need to explicitly require it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Unify all the file and function names of 'sifive_test' device, to use
the same prefix. This is also a preparatory patch for upcoming sifive
reset device.
Signed-off-by: Green Wan <green.wan@sifive.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The ACLINT devices are backward compatible with SiFive CLINT
so we replace all CLINT library usage in various platforms
with ACLINT library. As a result of this replacement, the
CLINT library is not used by any part of OpenSBI hence we
remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add a new FDT based ACLINT MTIMER driver which works for
both CLINT device and standalone ACLINT MTIMER device.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add a new FDT based ACLINT MSWI IPI driver which works for both
CLINT device and standalone ACLINT MSWI device.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add fdt_parse_aclint_node() which can parse both ACLINT and
CLINT DT nodes. This means fdt_parse_clint_node() is not required
anymore so we remove it as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add common ACLINT MSWI library similar to the CLINT library
so that OpenSBI platforms can use it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add common ACLINT MTIMER library similar to the CLINT library
so that OpenSBI platforms can use it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Don't assign an unused value to variable index.
Use operator '-=' where applicable.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Compiling wake_coldboot_harts() with GCC 11 and -Wextra yields:
lib/sbi/sbi_init.c:208:27:
error: comparison of integer expressions of different signedness:
‘int’ and ‘u32’ {aka ‘unsigned int’} [-Werror=sign-compare]
208 | for (int i = 0; i <= sbi_scratch_last_hartid(); i++) {
| ^~
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Compiling sbi_tlb_entry_process() with GCC 11 and -Wextra yields:
lib/sbi/sbi_tlb.c: In function ‘sbi_tlb_process_count’:
lib/sbi/sbi_tlb.c:206:31:
error: comparison of integer expressions of different signedness:
‘u32’ {aka ‘unsigned int’} and ‘int’ [-Werror=sign-compare]
206 | if (deq_count > count)
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Current, GET_F64_REG() macro does not generate correct inline
assembly for the RV32 systems. This patch provides separate
definitions of GET_F64_REG() macro for RV32 and RV64 systems.
Signed-off-by: Charles Papon <charles.papon.90@gmail.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
If property csr-copy does not exist, fdt_getprop() will return NULL and cnt
will have a random value from the stack.
Call clone_csrs() only if cnt is initialized to a non-zero value.
Fixes: 49e422c5ad ("lib: utils: reset: Add T-HEAD sample platform reset driver")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
In sbi_scratch_init() we determine the last hart. The index of the last
hart cannot exceed SBI_HARTMASK_MAX_BITS - 1. We should not initialize
last_hartid_having_scratch to a higher number to avoid buffer overflows
when using this value before calling sbi_scratch_init().
When allocating scratch memory in sbi_scratch_alloc_offset() we zero out
the allocated memory for all harts except for the last one. We should not
skip the last hart.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
plicsw_ipi_sync() is a forward declaration but without the actual
implementation. Drop it.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Fix several places in the docmentation that are missing spaces.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
- %s/CLINT/PLICSW
- replace '.' with a space
- add a space around * in plicsw_cold_ipi_init()
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The parameter owner of function sbi_scratch_alloc_offset() is never used.
The scratch memory is small. We should not use it for debug information in
future. Hence eliminate the parameter.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The value of the /chosen/stdout-path devicetree property is used to
determine the UART used by openSBI. According to the devicetree
specification the value may contain a hyphen, e.g.
chosen {
stdout-path = "/serial@f00:115200";
};
If the character ':' is present, it terminates the path of the device.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should try other FDT drivers when we see SBI_ENODEV returned
by cold_init() of FDT driver.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We can merge region B onto region A only if base of region A is
aligned to region A order + 1.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
