.clang-format

@@ -0,0 +1,10 @@
+BasedOnStyle:  Microsoft
+BinPackArguments: false
+BinPackParameters: false
+AlignAfterOpenBracket: DontAlign
+AlignConsecutiveMacros: true
+AlignConsecutiveAssignments: true
+IndentCaseLabels: true
+PointerAlignment: Left
+BraceWrapping:
+  AfterCaseLabel: true

.vscode/settings.json

@@ -6,7 +6,7 @@
             "comment": "clang-format"
         }
     ],
-    "editor.formatOnSave": false,
+    "editor.formatOnSave": true,
     "clangd.arguments": [
         "--pretty",
         "--background-index",

port/moonlight/hwtimer.h

@@ -15,7 +15,7 @@
 #include "platform.h"
 
 #define TICKNUM_PER_SECOND 32768
-#define TICKNUM_PER_TIMER (TICKNUM_PER_SECOND / 1000) // ~ 1ms timer
+#define TICKNUM_PER_TIMER (TICKNUM_PER_SECOND / 100) // ~ 1ms timer
 
 static inline int hwtimer_init(void) {
     uint64_t time = get_aclint_mtime(aclint);

port/threadx/inc/nx_port.h

@@ -62,16 +62,6 @@
 
 #define NX_LITTLE_ENDIAN
 
-/* Define various constants for the port.  */
-
-#ifndef NX_IP_PERIODIC_RATE
-#ifdef TX_TIMER_TICKS_PER_SECOND
-#define NX_IP_PERIODIC_RATE         TX_TIMER_TICKS_PER_SECOND
-#else
-#define NX_IP_PERIODIC_RATE         10
-#endif
-#endif
-
 /* Define macros that swap the endian for little endian ports.  */
 #ifdef NX_LITTLE_ENDIAN
 #define NX_CHANGE_ULONG_ENDIAN(arg)                                                                                                        \

port/threadx/inc/nx_user.h

@@ -61,11 +61,8 @@
 
 /* Define the base exponent of 2 for huge number.
  * Only 16 and 32 are supported. */
-#if __riscv_xlen == 64
-#define NX_CRYPTO_HUGE_NUMBER_BITS 16
-#else
 #define NX_CRYPTO_HUGE_NUMBER_BITS 32
-#endif
+#define NX_DIRECT_ISR_CALL 1
 /* Define various build options for the NetX Duo port.  The application should either make changes
    here by commenting or un-commenting the conditional compilation defined OR supply the defines
    though the compiler's equivalent of the -D option.  */
@@ -79,10 +76,8 @@
    present to NetX Duo IP layer.  Physical interface does not include
    loopback interface. By default there is at least one physical interface
    in the system. */
-
 #define NX_MAX_PHYSICAL_INTERFACES    2
 
-
 /* Defined, this option disables NetX Duo support on the 127.0.0.1 loopback interface.
    127.0.0.1 loopback interface is enabled by default.  Uncomment out the follow code to disable
    the loopback interface. */
@@ -99,13 +94,11 @@
 
 /* This defines specifies the number of ThreadX timer ticks in one second. The default value is based
    on ThreadX timer interrupt.  */
-/*
 #ifdef TX_TIMER_TICKS_PER_SECOND
 #define NX_IP_PERIODIC_RATE         TX_TIMER_TICKS_PER_SECOND
 #else
 #define NX_IP_PERIODIC_RATE         100
 #endif
-*/
 
 /* Defined, NX_ENABLE_IP_RAW_PACKET_FILTER allows an application to install a filter
    for incoming raw packets. This feature is disabled by default. */

port/threadx/inc/tx_user.h

@@ -130,7 +130,7 @@
    Note: the actual hardware timer value may need to be changed (usually in tx_initialize_low_level).  */
 
 
-#define TX_TIMER_TICKS_PER_SECOND       (33UL) // for moonlight with 32,7kHz Frequency (divided by 1000)
+#define TX_TIMER_TICKS_PER_SECOND       (100) // for moonlight with 32,7kHz Frequency (divided by 1000)
 
 
 /* Determine if there is a FileX pointer in the thread control block.

src/tcp_demo/main.c

@@ -134,7 +134,8 @@ void thread_0_entry(ULONG thread_input) {
 
     NX_PARAMETER_NOT_USED(thread_input);
 
-    tx_thread_sleep(NX_IP_PERIODIC_RATE);
+    /* Wait 1 second for the IP thread to finish its initilization. */
+    tx_thread_sleep(/* NX_IP_PERIODIC_RATE */ 10);
 
     /* set the TCP server addresses. */
     server_ipv4_address.nxd_ip_version = NX_IP_VERSION_V4;
@@ -234,7 +235,7 @@ void thread_1_entry(ULONG thread_input) {
     NX_PARAMETER_NOT_USED(thread_input);
 
     /* Wait 1 second for the IP thread to finish its initilization. */
-    tx_thread_sleep(NX_IP_PERIODIC_RATE);
+    tx_thread_sleep(/* NX_IP_PERIODIC_RATE */ 10);
 
     /* Ensure the IP instance has been initialized.  */
     status = nx_ip_status_check(&ip_1, NX_IP_INITIALIZE_DONE, &actual_status, NX_IP_PERIODIC_RATE);