108 lines
2.8 KiB
C++
108 lines
2.8 KiB
C++
#ifndef SRC_INIT_H_
|
|
#define SRC_INIT_H_
|
|
|
|
#include <cstdio>
|
|
#include <array>
|
|
|
|
#include "delay.h"
|
|
#include "bsp.h"
|
|
#include "plic/plic_driver.h"
|
|
|
|
typedef void (*function_ptr_t) (void);
|
|
//! Instance data for the PLIC.
|
|
plic_instance_t g_plic;
|
|
std::array<function_ptr_t,PLIC_NUM_INTERRUPTS> g_ext_interrupt_handlers;
|
|
bool spn1_hw_interrupt{true};
|
|
bool spn2_hw_interrupt{true};
|
|
|
|
|
|
/*! \brief external interrupt handler
|
|
*
|
|
* routes the peripheral interrupts to the the respective handler
|
|
*
|
|
*/
|
|
extern "C" void handle_m_ext_interrupt() {
|
|
plic_source int_num = PLIC_claim_interrupt(&g_plic);
|
|
if ((int_num >=1 ) && (int_num < PLIC_NUM_INTERRUPTS))
|
|
g_ext_interrupt_handlers[int_num]();
|
|
else
|
|
exit(1 + (uintptr_t) int_num);
|
|
PLIC_complete_interrupt(&g_plic, int_num);
|
|
}
|
|
/*! \brief dummy interrupt handler
|
|
*
|
|
*/
|
|
void no_interrupt_handler (void) {};
|
|
/*! \brief configure the per-interrupt handler
|
|
*
|
|
*/
|
|
void configure_irq(size_t irq_num, function_ptr_t handler, unsigned char prio=1) {
|
|
g_ext_interrupt_handlers[irq_num] = handler;
|
|
// Priority must be set > 0 to trigger the interrupt.
|
|
PLIC_set_priority(&g_plic, irq_num, prio);
|
|
// Have to enable the interrupt both at the GPIO level, and at the PLIC level.
|
|
PLIC_enable_interrupt(&g_plic, irq_num);
|
|
}
|
|
|
|
void wait_for_spn1_interrupt() {
|
|
// wait until HW is done
|
|
if(spn1_hw_interrupt) {
|
|
do{
|
|
asm("wfi");
|
|
asm("nop");
|
|
}while(spn1_hw_interrupt);
|
|
}
|
|
spn1_hw_interrupt=true;
|
|
}
|
|
|
|
void wait_for_spn2_interrupt() {
|
|
// wait until HW is done
|
|
if(spn2_hw_interrupt) {
|
|
do{
|
|
asm("wfi");
|
|
asm("nop");
|
|
}while(spn2_hw_interrupt);
|
|
}
|
|
spn2_hw_interrupt=true;
|
|
}
|
|
|
|
void wait_for_spn_interrupts() {
|
|
if(spn1_hw_interrupt || spn2_hw_interrupt) {
|
|
do{
|
|
asm("wfi");
|
|
asm("nop");
|
|
}while(spn1_hw_interrupt || spn2_hw_interrupt);
|
|
}
|
|
spn1_hw_interrupt=true;
|
|
spn2_hw_interrupt=true;
|
|
}
|
|
|
|
/*!\brief initializes platform
|
|
*
|
|
*/
|
|
void platform_init(){
|
|
// UART init section TODO: clarify how to get the functions from init.c?
|
|
GPIO_REG(GPIO_IOF_SEL) &= ~IOF0_UART0_MASK;
|
|
GPIO_REG(GPIO_IOF_EN) |= IOF0_UART0_MASK;
|
|
UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
|
|
|
|
F_CPU=PRCI_measure_mcycle_freq(20, RTC_FREQ);
|
|
printf("core freq at %d Hz\n", F_CPU);
|
|
// initialie interupt & trap handling
|
|
write_csr(mtvec, &trap_entry);
|
|
|
|
PLIC_init(&g_plic, PLIC_CTRL_ADDR, PLIC_NUM_INTERRUPTS, PLIC_NUM_PRIORITIES, 0);
|
|
// Disable the machine & timer interrupts until setup is done.
|
|
clear_csr(mie, MIP_MEIP);
|
|
clear_csr(mie, MIP_MTIP);
|
|
for (auto& h:g_ext_interrupt_handlers) h=no_interrupt_handler;
|
|
// Enable interrupts in general.
|
|
set_csr(mstatus, MSTATUS_MIE);
|
|
// Enable the Machine-External bit in MIE
|
|
set_csr(mie, MIP_MEIP);
|
|
|
|
//hw_interrupt = false;
|
|
}
|
|
|
|
#endif /* SRC_INIT_H_ */
|