Firmwares/fpga_spn/bsp/env/coreplexip-e31-arty/openocd.cfg

32 lines
877 B
INI

# JTAG adapter setup
adapter_khz 10000
interface ftdi
ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
ftdi_vid_pid 0x15ba 0x002a
ftdi_layout_init 0x0808 0x0a1b
ftdi_layout_signal nSRST -oe 0x0200
#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
ftdi_layout_signal LED -data 0x0800
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
# Un-comment these two flash lines if you have a SPI flash and want to write
# it.
flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
init
if {[ info exists pulse_srst]} {
ftdi_set_signal nSRST 0
ftdi_set_signal nSRST z
}
halt
#flash protect 0 64 last off
echo "Ready for Remote Connections"