We should use lower bits for domain memory region access permissions
and higher bits for other domain memory region attributes. This helps
us use same bit assignment for parsing domain memory region access
permissions from device tree.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_domain_finalize() should auto start a domain only if the
boot HART is withing limits (i.e. less than SBI_HARTMASK_MAX_BITS).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The domain_count check in sbi_domain_finalize() for newly discovered
domain is incorrect and should be reversed.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
There has been typo in automatic domain boot hart startup
for non-root domains so this patch fixes it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should check and access N-extension CSRs in sbi_hart_switch_mode()
when next_mode is u-mode because N-extension is optional.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
On RV32 systems, we have two CSRs for M-mode status (MSTATUS and
MSTATUSH) when H-extension is implemented. This means we have to
save/restore MSTATUSH for RV32 systems only when H-extension is
implemented. The current _trap_handler() has extra instructions
(roughly 10) for conditional save/restore of MSTATUSH CSR.
These extra instructions in RV32 _trap_handler() can be avoided
if we create separate low-level trap handler for RV32 systems
having H-extension. This patch optimizes low-level trap handler
for RV32 systems accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The SBI SRST extension has been accepted and merged in the latest
SBI v0.3-draft specification.
(Refer, https://github.com/riscv/riscv-sbi-doc)
It allows to S-mode software to request system shutdown, cold reboot,
and warm reboot.
This patch implements SBI SRST extension as a replacement of the
legacy sbi_shutdown() call of SBI v0.1 specification.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
To implement the SBI SRST extension, we need two platform operations
for system reset:
1) system_reset_check() - This operation will check whether given
reset type and reason are supported by the platform
2) system_reset() - This operation will do the actual platform
system reset and it will not return if reset type and reason
are supported by the platform
This patch updates system reset related code everywhere as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Few platforms have dummy system reset functions so let's remove
these dummy system reset functions to allow generic code deal
with it in the right way.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can now use the standard SBI SRST extension reset types instead
of the opensbi specific (SBI_PLATFORM_RESET_xyz) reset types hence
remove related opensbi specific defines. The "platform_" prefix of
the reset type parameter of sbi_system_reset() function should also
be removed.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend the SBI ecall interface header for the SBI SRST extension
recently accepted in SBI specification v0.3-draft.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, we have all boot prints at the end of cold boot sequence
which means if there is any failure in cold boot sequence before
boot prints then we don't get any print.
This patch improves boot prints in cold boot sequence as follows:
1. We divide the boot prints into multiple parts and print it
from different locations after sbi_console_init()
2. We throw an error print if there is any failure in cold boot
sequence after sbi_console_init()
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When PLATFORM_RISCV_ABI and PLATFORM_RISCV_ISA are not specified,
we force "-mabi=lp64 -march=rv64gc" for RV64 and force "-mabi=ilp32
-march=rv32gc" for RV32. This can prevent users from using the
toolchain default "-mabi" and "-march" options.
To allow using toolchain defaults, we add compile-time option
PLATFORM_RISCV_TOOLCHAIN_DEFAULT which when enabled forces the
top-level makefile to use toolchain default ABI and ISA string.
To enable the option, pass "PLATFORM_RISCV_TOOLCHAIN_DEFAULT=1"
to top-level make.
Reported-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We add initial documentation for OpenSBI domain support to help
RISC-V platform vendors achieve system-level partitioning.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend boot prints to display details of each domain. In the
process, we remove sbi_hart_pmp_dump() because it shows redundant
information which domain details already show.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The PMP configuration on each HART should be only based on the memory
regions of the assigned domain because each domain includes a memory
region to protect the underlying firmware.
This patch updates the sbi_hart_pmp_configure() function accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hart_pmp_get() and sbi_hart_pmp_check_addr() functions
are not used anymore hence this patch removes these functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_cpu_fixup() should disable a HART in DT if the HART
is not assigned to the current HART domain. This patch updates
fdt_cpu_fixup() accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that each HART is mapped to a domain having a set of memory
regions, we update fdt_reserved_memory_fixup() to use domain memory
regions for adding reserved memory nodes in device tree.
We also change reserved memory node name prefix from "mmode_pmp"
to "mmode_resv" because domain memory regions can impact other
hardware configurations (such as IOPMP, etc) along with PMP.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_system_reset() should issue platform system reset only if
domain of current HART is allowed to do system reset.
This patch extends sbi_system_reset() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Instead of calling sbi_hsm_hart_get_state() in a loop, we can simply
call a new inline __sbi_hsm_hart_get_state() which only takes "hartid"
and enforce domain checks using sbi_domain_assigned_hartmask().
This patch optimizes sbi_hsm_hart_started_mask() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hsm_hart_start() should consider the domain under which we
are trying to start the HART. This will help ensure that HART A can
start HART B only if both HARTs A and B belong to the same domain.
We also have a special case when we bring-up boot HART of non-root
domains in sbi_domain_finalize() where we should skip domain checks
in sbi_hsm_hart_start(). To achieve this, sbi_hsm_hart_start() should
do domain checks only when domain parameter is non-NULL.
This patch extends sbi_hsm_hart_start() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hsm_hart_started_mask() API should take one more parameter
to allow caller specify domain under which started_mask is being
generated. Further, the sbi_hsm_hart_started_mask() depends on
sbi_hsm_hart_get_state() which also should return HART state under
specified domain.
This patch updates both sbi_hsm_hart_started_mask() and
sbi_hsm_hart_get_state() as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
An OpenSBI domain is a logical entity representing a set of HARTs
and a set of memory regions for these HARTs.
The OpenSBI domains support will allow OpenSBI platforms and previous
booting stage (i.e. U-Boot SPL, Coreboot, etc) to partition a system
into multiple domains where each domain will run it's own software.
For inter-domain isolation, OpenSBI will eventually use various HW
features such as PMP, ePMP, IOPMP, SiFive shield, etc but initial
implementation only use HW PMP support.
This patch provides initial implementation of OpenSBI domains where
we have a root/default domain and OpenSBI platforms can provide
non-root/custom domains using domain_get() callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hartmask_test_hart() does not modify hartmask so the
hartmask pointer parameter should be declared const.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The hartid parameter of sbi_hart_init() is not used anywhere in
sbi_hart_init() implementation so let's remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We factor-out PMP configuration from sbi_hart_init() as a separate
sbi_hart_pmp_configure() function and do the PMP configuration very
late in coldboot and warmboot path just before platform_final_init().
Eventually, this enable us to configure PMP totally based on OpenSBI
domain where OpenSBI domains can be parsed from device-tree in any of
the platform operations except platform_final_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The pmp_region_xyz() callbacks are not required in sbi_platform_operations
because we will be using OpenSBI domain memory regions to program the
PMP CSRs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The sbi_ecall.h and sbi_trap.h are not required to be included in
sbi_platform.h hence we remove it. This way sources requiring
these headers will have to explicitly include it thereby reducing
implicit includes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The Kendryte K210 platform has built-in DTB and does not provides
FW_PAYLOAD_FDT_ADDR. This means the FDT fixups will be done on
the built-in DTB in absence of FW_PAYLOAD_FDT_ADDR. This patch
adds some padding in built-in DTB for FDT fixups.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The FW_PAYLOAD_FDT_PATH compile-time option is replaced by
FW_FDT_PATH compile-time option which is more flexible and
common across all OpenSBI firmwares.
This patch removes FW_PAYLOAD_FDT_PATH and updates related
documentation to use FW_FDT_PATH.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, only FW_PAYLOAD has mechanism to embed external
FDT using FW_PAYLOAD_FDT_PATH compile-time option.
This patch adds a common FW_FDT_PATH compile-time option to
embed external FDT for all OpenSBI firmwares (i.e FW_JUMP,
FW_PAYLOAD, and FW_DYNAMIC).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the make rules for ELF, BIN and LD script are little
generic to allowing ELF, BIN and LD script to be anywhere in the
build directory. For OpenSBI firmwares, the ELF, BIN, and LD script
are always platform specific so we update make rules accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the generic platform fw_platform_init() marks non-MMU
HARTs (e.g. E-core on SiFive Unleashed) as invalid. This means
such non-MMU HARTs won't be allowed to go ahead by sbi_init().
The sbi_init() now has a check for next stage privilege mode when
selecting coldboot HART. This check will force non-MMU HARTS (i.e.
HARTs without S-mode) to proceed in warmboot path and wait in the
HSM STOPPED state. This means we don't need to mark non-MMU HARTs
as invalid in generic platform fw_platform_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The coldboot HART jumps to the next booting stage at the end of
init_coldboot() so it is absolutely necessary for coldboot HART
to support the privilege mode expected by the next booting stage.
We extend the coldboot HART selection in sbi_init() to ensure that
the selected coldboot HART always supports privilege mode specified
in scratch space (i.e. scratch->next_mode). This will further help
us allow E-core (without MMU) on SiFive Unleashed and PolarFire
ICICLE boards to proceed further and wait in HSM STOPPED state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_cpu_fixup() should work fine even if HARTs without MMU
are not marked invalid by platform support code.
In future, we plan to treat HARTs without MMU as valid in the
generic platform support so that we can hold these HARTs in
HSM STOPPED state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend sbi_hart_pmp_check_addr() API so that users can specify
privilege mode of the address for checking PMP access permissions.
To achieve this, we end-up converting "unsigned long *size" parameter
to "unsigned long *log2len" for pmp_get() implementation so that we
can deal with regions of "1UL << __riscv_xlen" size in a special case
in sbi_hart_pmp_check_addr() implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_scratch already has provision to specify the next stage mode
so we can leverage this to specify start mode to sbi_hsm_hart_start().
In future, this will be useful in providing SBI calls to U-mode on
embedded cores where we M-mode and U-mode but no S-mode.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should allow M-mode to M-mode ECALLs because:
1. No other mode can handle M-mode ECALLs
2. In future, we can allow M-mode baremetal application (not
linked to OpenSBI) running independently and cooperatively
without corrupting OpenSBI M-mode state (CSRs and memory).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We rename CAUSE_HYPERVISOR_ECALL to CAUSE_SUPERVISOR_ECALL and
CAUSE_SUPERVISOR_ECALL to CAUSE_VIRTUAL_SUPERVISOR_ECALL so that
it matches latest RISC-V privilege spec.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The VS-mode ecall is supposed to be handled by HS-mode so
sbi_trap_handler() should fallback to default case for
VS-mode ecall trap.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We improve HPM CSR read/write emulation as follows:
1. Fail for unimplemented counters so that trap is redirected
to S-mode which can further help debugging S-mode software.
2. Check permissions in both MCOUNTEREN and SCOUNTEREN for
HS-mode and U-mode.
3. Don't check permissions for TIME CSR because we emulate
TIME CSR for both Host (HS/U-mode) and Guest (VS/VU-mode).
Also, faster TIME CSR read is very helpful for good
performance of S-mode software.
4. Don't emulate S-mode CSR read/write to M-mode HPM CSRs
because these should not be accessible to S-mode software.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch does following cosmentic changes to riscv_encoding.h:
1. Re-organize CSR defines to match CSR listing in latest RISC-V
privilege spec
2. Rename CSR_HCOUNTERNEN to CSR_HCOUNTEREN
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
A RISC-V platform can leave unimplemented MHPM counters hard-wired
to zero. We extend hart_detect_features() to detect MHPM counters
which are accessible and not hard-wired to zero. We also print
number of available MHPM counters as part of boot prints.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
As-per latest RISC-V privilege spec up to 64 PMP entries are supported.
Implementations may implement zero, 16, or 64 PMP CSRs. All PMP CSR
fields are WARL and may be hardwired to zero.
This patch improves PMP CSR detection and progamming considering
above facts.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The SBI_HART_HAS_PMP feature is redundant because we already
have number of PMP regions returned by sbi_hart_pmp_count().
Checking whether PMP is supported for a HART can be simply done
by checking non-zero value returned by sbi_hart_pmp_count().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The Kendryte K210 follows RISC-V v1.9 spec so MTVAL has instruction
address (instead of instruction encoding) on illegal instruction trap.
To handle above case, we fix sbi_illegal_insn_handler() without any
impact on RISC-V v1.10 (or higher) systems. This achieved by exploiting
the fact that program counter (and instruction address) is always 2-byte
aligned in RISC-V world.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have thundering hurd problem with coldboot_lock where the
boot HART can potentially starve trying to acquire coldboot_lock
because some of the non-boot HARTs are continuously acquiring and
releasing coldboot_lock. This can happen if MIP.MSIP bit is already
set for some of the non-boot HARTs.
To avoid thundering hurd problem for coldboot_lock, we use the
__smp_load_acquire() and __smp_store_release() for coldboot_done
flag and use coldboot_lock only for coldboot_wait_hmask.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Currently, the low-level trap handler (i.e. _trap_handler()) uses
branch instructions to conditionally setup exception stack based
on which mode trap occured.
This patch implements exception stack setup using xor instructions
which is faster with same number of instructions due to lack of
branch instructions.
The new exception stack setup approach can be best described by the
following pseudocode:
Came_From_M_Mode = ((MSTATUS.MPP < PRV_M) ? 1 : 0) - 1;
Exception_Stack = TP ^ (Came_From_M_Mode & (SP ^ TP))
Came_From_M_Mode = 0 ==> Exception_Stack = TP
Came_From_M_Mode = -1 ==> Exception_Stack = SP
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
If MTINST[0:0] bit is 1 then we have transformed instruction encoding
in MTINST CSR. For transformed instructions, if the MTINST[1:1] bit
is Zero then original trapped instruction was a 16bit instruction
which was converted to 32bit instruction at time of taking trap.
We should use MTINST[1:1] bit to determine correct instruction length
of transformed instruction.
This patch updates misaligned load/store emulation as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should only return valid error codes from SBI ecalls as
defined by the RISC-V SBI spec.
To achieve this:
1. We use SBI_Exxxx defines for OpenSBI internal errors with
error values starting from -1000
2. We use SBI_ERR_xxxx defines for errors defined by SBI spec
3. We map some of the SBI_Exxxx defines to SBI_ERR_xxxx defines
which are semantically same
4. We throw a error print and force return error code to
SBI_ERR_FAILED in sbi_ecall_handler() if we see an invalid
error code being returned to S-mode
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The arguments/parameters of __sbi_hfence_gvma_vmid_gpa() and
__sbi_hfence_vvma_asid_va() functions are swapped so we fix it.
Currently, we did not face any issues because QEMU does a full
TLB flush for all HFENCE instructions.
We also improve documentation of HFENCE.GVMA and HFENCE.VVMA
instruction encoding.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
To support RISC-V hypervisor v0.6.1, we:
1. Don't need to explicitly forward WFI traps from VS/VU-mode
2. Have to delegate virtual instruction trap to HS-mode
3. Have to update trap redirection for changes in HSTATUS CSR
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that no platform is using FW_PAYLOAD_FDT mechanism, we
remove related code from Makefile and related documentation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We update kendryte/k210 to use new mechanism of having builtin DTB
where we convert k210.dts to C source and further compile-n-link it
with libplatsbi.a.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, we can only include one DTB as builtin for a platform
using FDT_PAYLOAD_DTB make variable in platform config.mk.
This patch adds new mechanism using which we can convert any DTS
file to C source and futher compile-n-link it with libplatsbi.a.
The generated C source will have the DTB contents as an array
"const char <varprefix>_start[]" where <varprefix> is specified
in platform objects.mk makefile.
Example1
--------
If we have built-in k210.dts and desired <varprefix> is
"dt_k210" then specify following in platform objects.mk:
platform-objs-y += k210.o
platform-varprefix-k210.o = dt_k210
Example2
--------
If we have built-in abc/k210.dts and desired <varprefix> is
"dt_abc_k210" then specify following in platform objects.mk:
platform-objs-y += abc/k210.o
platform-varprefix-abc-k210.o = dt_abc_k210
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
In order to use GCC style defines and macros in DTS, we should
preporcess builtin DTS before converting it to DTB.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, the fw_platform_init() does not return anything but we can
further improve by allowing fw_platform_init() to return updated FDT
location.
It is certainly not mandatory for fw_platform_init() to return a new
location of FDT (or modify FDT). In fact, the fw_platform_init() can
always return the original FDT location (i.e. 'arg1') unmodified.
This new capability of fw_platform_init() will allow platforms to:
1. Have multiple built-in FDTs and select one
2. Modify FDT before using based on platform specific straps or OTP
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, we are ORing FW_OPTIONS with the options passed by
previous booting stage to fw_dynamic. This causes confusion
because compiling fw_dynamic with FW_OPTIONS=0x2 does not force
enable boot prints as the U-Boot SPL passes options=0x1 in
fw_dyanmic_info.
The best thing to do is always prefer FW_OPTIONS when available.
This is intuitive for OpenSBI users and easy in debugging.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, fw_prev_arg1() is called after fw_platform_init() which
caused builtin DTB to be not available to fw_platform_init().
To allow builtin DTB available to fw_platform_init(), we should
call fw_save_info() and fw_prev_arg1() before fw_platform_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The make rule for builtin DTB compilation does not consider
out-of-tree platforms so this patch fixes it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have multiple matching DT nodes of the same FDT timer driver
so in this case we should call cold_init() for all matching DT nodes
instead of just first matching DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have multiple matching DT nodes of the same FDT ipi driver
so in this case we should call cold_init() for all matching DT nodes
instead of just first matching DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_clint_node() function which will be used by
fdt_ipi_clint and fdt_timer_clint drivers to parse CLINT details
from DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend CLINT cold init function to have a "struct clint_data *"
parameter pointing to CLINT details. This allows platforms to use
CLINT functions for multiple CLINT instances.
When multiple CLINTs are present, the platform can also provide
one of the CLINT as reference CLINT for other CLINTs. This will
help CLINTs to sync their time value with reference CLINT using
a time_delta computed in warm init function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have multiple matching DT nodes of the same FDT irqchip
driver so in this case we should call cold_init() for all matching
DT nodes instead of just first matching DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend fdt_find_match() implementation by adding node offset
parameter which represents the first node to match from.
The improved fdt_find_match() can be used to find multiple
match nodes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend all PLIC functions to have a "struct plic_data *"
parameter pointing to PLIC details. This allows platforms to
use these functions for multiple PLIC instances.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The "target_hart" and "hart_count" parameters of PLIC cold and
warm init functions are only used for sanity checks and not
required in PLIC initialization.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
It is not mandatory for a RISC-V systems to implement all PMP
regions so we have to check all PMPADDRx CSRs to determine excat
number of supported PMP regions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
This patch does few cosmetic improvements to HART feature detection:
1. Remove sbi_ perfix from HART feature detection functions
because all local/static functions in sbi_hart.c don't have
sbi_ prefix
2. Remove sbi_hart_set_feature() because it's quite small and
local/static in sbi_hart.c
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
It makes more sense to have scratch pointer as parameter in
HART feature APIs because:
1. We already have scratch pointer at places where these APIs
are used.
2. This is consistent with lot of other APIs in sbi_hart.h
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
On platforms with continuous HART ids starting from zero:
0 <= boot HART id < platform HART count
The above co-relation of boot HART id and platform HART count
is true for most RISC-V platfors so it's better to print platform
HART count just before boot HART id.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We do following improvements for get_feature_str():
1. We should return "none" from get_feature_str() no features
available instead of sbi_boot_prints() explicitly handling
failure.
2. We don't need to return failure (just like misa_xlen())
because we are returning "none" for no features and we are
truncating output when space is not available.
3. Based on 1 and 2, the sbi_boot_prints() can be further
simplified.
4. No need for two char[] in sbi_boot_prints()
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should detect HART features in sbi_hart_init() before
mstatus_init(), delegate_traps() and pmp_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Doxygen does not support italic text in page title so fix
some of the markdown files accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, all markdown pages are randomly arranged in table of
contents so to fix this we treat top-level README.md as mainpage
and enable Doxygen TREEVIEW.
Also, there should not be any text before title of a markdown
page so we move project copyright as separate section in top-level
README.md.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The generic platform provides IPI and timer functionality based on
DT node provided in the FDT passed by previous booting stage. This
patch updates generic platform documentation about IPI and timer
expectations.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The generic platform will try to select serial console based on the
stdout-path DT property in /chosen DT node hence we document this.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The RISC-V ISA string does not follow alphabetical order. Instead,
we have a RISC-V specific ordering of extensions in the RISC-V ISA
string. This patch improves misa_string() implementation to return
a valid RISC-V ISA string.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The HFENCE VVMA instructions flushes TLB based on the VMID
present in HGATP CSR. To handle this, we get the current
VMID for SBI HFENCE VVMA call and we use this current VMID
to do remote TLB HFENCE VVMA on desired set of HARTs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We don't have page table programming in OpenSBI so let's remove
redundant page table related defines from riscv_encoding.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The OpenSBI generic platform works perfectly fine on the QEMU spike
machine and Spike emulator so let's remove dedicated Spike platform
from OpenSBI.
All Spike platform related documentation in OpenSBI will now suggest
using OpenSBI generic platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The OpenSBI generic platform works perfectly fine on the QEMU virt
machine so let's remove dedicated QEMU virt machine platform from
OpenSBI.
All QEMU virt machine related documentation in OpenSBI will now
suggest using OpenSBI generic platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We need to override the remote TLB flush range limit for SiFive FU540
so we add platform override to achieve this.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that we have generic platform which detects hart count from
DTB, we should print platform hart count at boot time.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add generic FDT based platform support which provides platform
specific functionality based on the FDT passed by previous booting
stage.
By default, the generic FDT platform makes following assumptions:
1. platform FW_TEXT_START is 0x80000000
2. platform features are default
3. platform stack size is default
4. platform has no quirks or work-arounds
The above assumptions (except 1) can be overridden by adding special
platform callbacks which will be called based on the FDT root node
compatible string.
By default, we compile OpenSBI generic platform as follows:
$ make PLATFORM=generic
For a non-standard FW_TEXT_START, we can compile OpenSBI generic
platform as follows:
$ make PLATFORM=generic FW_TEXT_START=<non_standard_text_start>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add optional fw_platform_init() function which will allow
platform specific code to update "struct sbi_platform platform"
before it is used.
The fw_platform_init() can be a regular C function so before
callint it we:
1. zero-out BSS section
2. Setup temporary trap handler to catch bugs
3. Setup temporary stack pointer
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple reset framework which will select and use reset driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple serial framework which will select and use serial driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple irqchip framework which will select and use irqchip driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple ipi framework which will select and use ipi driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add simple timer framework which will select and use timer driver
based on details in FDT passed by previous booting stage.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Getting array size of a dynmaic array can be very handy hence
this patch.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We add fdt_parse_plic_node() function which will allow us to parse
a particular DT node as PLIC node. This will be useful in parsing
the DT node which we have found by matching compatible string.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
