We add the menvcfg CSR as a HART feature and detect it at boot time
using traping mechanism.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Sscofpmf ISA extension introduces PMU counter overflow and filtering support.
It introduces a read only `scountovf` csr that can be used to detect if
a hart supports this extension at runtime. However, this feature is only
useful if the hart already supports mcounteren and mcountinhibit.
Add a dynamic detection mechanism and boot time print message if sscofpmf
is present.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V privilege specification allows the implementation to have less
than 64 bits.
Add a function to detect the number of implemented bits in mhpmcounter
dynamically at runtime.
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
RISC-V ISA specification v1.11 defined mcountinhibit CSR that allows
software to stop any counter from incrementing. The SBI PMU extension
depends on this CSR support in hardware.
Define mcountinhibit as a hart specific feature and detect it at runtime.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
We add sbi_hart_reinit() function which will re-initialize HART CSRs
assuming HART features are already detected. This new function will
be useful in re-initializing HART after it resumes from HSM SUSPENDED
state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
As per RISC-V privilege specification, a platform may choose to implement
a coarser granularity scheme for PMP addresses. In that case, we shouldn't
allow any pmp region size smaller than the platform supports. A platform
may not also implement all the bits for a PMP address specified in the priv
specification.
The pmp range granularity and address bits should be detected dynamically
before detecing PMP regions. Any pmp modification request beyond these detected
value must not succeed.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We extend boot prints to display details of each domain. In the
process, we remove sbi_hart_pmp_dump() because it shows redundant
information which domain details already show.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hart_pmp_get() and sbi_hart_pmp_check_addr() functions
are not used anymore hence this patch removes these functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The hartid parameter of sbi_hart_init() is not used anywhere in
sbi_hart_init() implementation so let's remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We factor-out PMP configuration from sbi_hart_init() as a separate
sbi_hart_pmp_configure() function and do the PMP configuration very
late in coldboot and warmboot path just before platform_final_init().
Eventually, this enable us to configure PMP totally based on OpenSBI
domain where OpenSBI domains can be parsed from device-tree in any of
the platform operations except platform_final_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We extend sbi_hart_pmp_check_addr() API so that users can specify
privilege mode of the address for checking PMP access permissions.
To achieve this, we end-up converting "unsigned long *size" parameter
to "unsigned long *log2len" for pmp_get() implementation so that we
can deal with regions of "1UL << __riscv_xlen" size in a special case
in sbi_hart_pmp_check_addr() implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
A RISC-V platform can leave unimplemented MHPM counters hard-wired
to zero. We extend hart_detect_features() to detect MHPM counters
which are accessible and not hard-wired to zero. We also print
number of available MHPM counters as part of boot prints.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The SBI_HART_HAS_PMP feature is redundant because we already
have number of PMP regions returned by sbi_hart_pmp_count().
Checking whether PMP is supported for a HART can be simply done
by checking non-zero value returned by sbi_hart_pmp_count().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
It is not mandatory for a RISC-V systems to implement all PMP
regions so we have to check all PMPADDRx CSRs to determine excat
number of supported PMP regions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
It makes more sense to have scratch pointer as parameter in
HART feature APIs because:
1. We already have scratch pointer at places where these APIs
are used.
2. This is consistent with lot of other APIs in sbi_hart.h
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We do following improvements for get_feature_str():
1. We should return "none" from get_feature_str() no features
available instead of sbi_boot_prints() explicitly handling
failure.
2. We don't need to return failure (just like misa_xlen())
because we are returning "none" for no features and we are
truncating output when space is not available.
3. Based on 1 and 2, the sbi_boot_prints() can be further
simplified.
4. No need for two char[] in sbi_boot_prints()
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We have now clear distinction between platform and hart features.
Modify the boot print messages to print hart specific features in
a string format.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As per the RISC-V specification, time value can be obtained from a time
CSR implemented in hardware or a MMIO based IP block. Qemu virt machine
already supports timer csr while CLINT provides the timer for other
platforms.
Implement a hart specific timer feature that can be detected at runtime.
As CSR based timer implementation are faster than MMIO address based, it
is always preferred over MMIO based one.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
PMP & performance counters belong to a hart rather than a platform.
In addition to that, these features enable reading/writing from a
particular csr. Thus, they can be detected and set at runtime rather
than compile time.
Move PMP/MCOUNTEREN/SCOUNTEREN features to hart and detect them at runtime.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There may be some features which are hart specific rather than a platform
specific feature. Add a framework to support that.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Unprivileged trap handler can be reused for any cases where the executing
code expects a trap.
Rename it to "expected" trap handler as it will be used in other cases in
future.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch optimize unpriv load/store implementation by having
dedicated unpriv trap handler (just like KVM RISC-V).
As a result of this optimization:
1. We have reduced roughly 13+ instruction in all unpriv load/store
functions. The reduced instruction also include two function calls.
2. Per-HART trap info pointer in scratch space is now redundant
hence removed.
3. The sbi_trap_handler() is now much cleaner because we don't have
to handle unpriv load/store traps.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_current_hartid() being a regular function is quite
expensive because for callers it is a function call instead
of a direct CSR read. This patch converts sbi_current_hartid()
into a macro in riscv_asm.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hart_id_to_scratch() just forwards call to firmware specific
hartid_to_scratch() callback so we make sbi_hart_id_to_scratch() as
macro in sbi_scratch.h instead of regular function in sbi_hart.c.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The HART available mask and related APIs are now totally redundant
because of more extensive HART state machine implemented by sbi_hsm.
Due to above, we remove HART available mask and related APIs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The coldboot wait APIs are only used by sbi_init.c so no point in
having coldboot related code in sbi_hart.c.
As per-above rationale, we move all coldboot wait related APIs to
sbi_init.c as static/local functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This patch adds support for hart hotplug in OpenSBI using a generic WFI
based approach. Hart hotplug can be achieved via SBI HSM extension which
allows supervisor mode software to start or stop any harts anytime.
Any platform wishes to implement platform specific hart hotplug must
implement both hart_start and hart_stop in addition to enable platform
feature SBI_PLATFORM_HAS_HART_HOTPLUG.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We print MIDELEG and MEDELEG CSRs as part of boot prints so that
boot log shows the interrupts and exceptions delegated to S-mode.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch extends sbi_hart_switch_mode() to support entering
VS/VU modes when hypervisor extension is available.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
This patch adds per-HART trap info pointer which can be used to
communicate trap information to sbi_trap_handler().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Cleanup sbi_hart_boot_nexti() code, adding messages for clarity and
rename the function to sbi_hart_switch_mode() to reflect what the
function actually does.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Allow a platform to report its supported features in more details.
The new features defined are:
* SBI_PLATFORM_HAS_PMP
* SBI_PLATFORM_HAS_SCOUNTEREN
* SBI_PLATFORM_HAS_MCOUNTEREN
In addition, define the macro SBI_PLATFORM_DEFAULT_FEATURES as the set
of features that are generally expected to be supported by a Linux
capable platform.
Operations touching the features controlled with these falgs are not
executed if the platform does not set the corresponding feature flags.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
