The mpxy_rpmi_mbox_data is provided by RPMI service group specific
MPXY driver to the common MPXY RPMI mailbox client implementation
so let's constantify mpxy_rpmi_mbox_data in mpxy_rpmi_mbox so that
it is not accidently modified.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Instead of having one common FDT MPXY RPMI mailbox client drivers
for various RPMI service groups, split this driver into two parts:
1) Common MPXY RPMI mailbox client library
2) MPXY driver for RPMI clock service group
The above split enables having a separate MPXY driver for each
RPMI clock service group and #1 (above) will allow code sharing
between various MPXY RPMI drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
With the "max" QEMU cpu, the displayed extension string is truncated due
to the buffer being too small. Increase it to 256 to display the full
set of extensions correctly.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For driver subsystems that are not tightly integrated into the OpenSBI
init sequence, it is not important that the drivers are initialized in
any particular order. By putting all of these drivers in one array, they
can all be initialized with a single pass through the devicetree. This
saves about 10 ms of boot time on HiFive Unmatched.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that all drivers are using the fdt_driver functions for
initialization, this function is unused and can be removed.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The irqchip driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_irqchip_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The Sophgo SG2044 is a new version of C920, although it supports
sscofpmf, it still needs this pmu quirks its cores.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Due to some historical issues, the value of BOOT_STATUS_BOOT_HART_DONE
has changed and the comment message needs to be corrected.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
It is possible that hartid may not be sequential and it should not be validated
against SBI_HARTMASK_MAX_BITS. Instead we should check the index of the hartid,
hart index, against SBI_HARTMASK_MAX_BITS.
Signed-off-by: Raj Vishwanathan <Raj.Vishwanathan@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Align SBI_TRAP_CONTEXT_SIZE to a multiple of 16 bytes. If it is not
aligned to 16 bytes for RV64, it can create performance problems.
Aligning it correctly can fix the performance issues.
Signed-off-by: Raj Vishwanathan <Raj.Vishwanathan@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The domain_support.md documentation states that the enforce permission
bit (BIT[6]) could be set in the "regions" property of a domain
instance DT node. However, this bit is masked in the current
implementation. This patch unmasks the bit to make it configurable
from DT.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
1. Initialize struct imsic_data imsic to 0 at definition to prevent the
use of uninitialized memory, ensuring the variable starts with known
values.
2. Remove the redundant memset call on the "aplic" parameter since the
memory for aplic is allocated using sbi_zalloc() by the caller
irqchip_aplic_cold_init(), which guarantees it is already set to 0.
Signed-off-by: Huang Borong <huangborong@bosc.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
If a standard event was not found in the list of events that are handled
by harts but belongs to the standard event list defined by the
specification, return SBI_ENOTSUPP. Without that, we can not
distinguish a non implemented standard event from a non valid one.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
In order to allow events to be dynamically added, remove the existing
static array of events and use a simply linked list of supported events.
This allows us to move the cb_ops into this list and associated it with
an event_id. Drivers can now register cb_ops before bringing up the sse
core to handle additional events (platform ones for instance).
sbi_sse_init() now allocates as many events as present in the linked
list. Events can now be added with sbi_sse_add_event() which allows to
add new supported events with some callback operations if any. If an
event is not to be supported, then sbi_sse_add_event() should not be
called. This approach currently consider that local events are to be
supported on all harts (ie, they all support the same ISA or
dependencies). If per-hart event availability needs to be supported,
then, an is_supported() callback could be added later and called for
each hart.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add a simple singly linked list implementation when double linked list
are not needed. This allows to easily have statically defined linked
list that can be extended at runtime.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since event support will be checked in the next commits, return a value
from sse_event_get() to allow propagating it. This will be used to
report SBI_ERR_NOT_SUPPORTED when an event isn't supported.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We will add new functions to sbi_double_trap.c in order to register an
SSE event, split this to a header as part of preparation work.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
While sbi_pmu_irq_bit() was used to delegate irq to S-mode, LCOFIP usage
was still hardcoded in various places. This led to change the returned
value of sbi_pmu_irq_bit() to be a bit number rather than a bit mask
since it returns an 'int' and we need to obtain the bit number itself to
handle it in the IRQs handlers. Add a similar function to return the
irq mask which can also be used where the mask is required rather than
the bit itself.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Currently, the same irqchip instance is registered for multiple PLIC
and APLIC instances which causes the sbi_list_for_each_entry() loop
in the sbi_irqchip_init() to hang at boot-time.
To address the above issue, register a separate irqchip instance for
each PLIC and APLIC instance.
Fixes: 2dd6eaf680 ("lib: sbi_irqchip: Call driver warm_init from SBI core")
Reported-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Addition of "Experimental SBI Extensions" to the boot-time prints
disturbs the alignment of other prints so adjust all boot-time
prints accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
These drivers were merged on an experimental basis without the RPMI
specification being frozen. As a result, they may not be compatible with
the frozen version of the RPMI protocol. Additionally, their devicetree
bindings have not been reviewed and are subject to change. Warn the user
that these drivers make no compatibility guarantees, and that their
behavior and devicetree bindings may change incompatibly in future
versions of OpenSBI.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Initialize serial drivers first, so messages printed by other drivers do
not need to use the early console buffer.
Suggested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Improve 64-bit operation under rv32 and remove db_val_u32_hi
in rpmi_cppc_fc_db_trigger().
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The raw events have same event_idx. Thus, the event info sanity check
only relies on the select mask. The raw event check should be done first
so that regular hardware events can be verified using event idx range
check.
Fixes: e434584216 ("lib: sbi_pmu: Implement SBI PMU event info function")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The hardware event map function invoked from platform code should
exclude any raw events as there is a separate function for the raw
events.
Fixes: d8a483fc7f ("lib: sbi_pmu: PMU raw event v2 support")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The shell script makes multiple call-outs to awk to get information
from the configuration file. It would be easier to just write the
whole thing in one .awk script and have the makefile altered to call
that instead.
There should be no functional difference other than the script type
and has been tested with PLATFORM=generic build. This should be both
quicker and easier to understand.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
Send the errors to stderr, otherwise they end up being
written to the file the script was redirecting to in the
Makefile
Also, use EOF block to make it easier to redirect
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
If the script fails, we end up trying to build either
an empty or damaged .c file. Just remove it and let
gcc fail on non-existent file.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
The specification states that a6 contains the current hart id and
a7 contains the entry argument. This was inverted in the current
implementation.
Reported-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Fix GLOBAL_PLAT_0_START/END definitions. The specification states that
the beginning of the range is 0xc000 and the end is 0xffff.
Reported-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Enabling V-extension using -march option causes OpenSBI boot-time
hang with LLVM compiler.
As a work-around, don't enable V-extension using -march option and
instead use a custom OpenSBI specific define inform availability of
V-extension to lib/sbi/sbi_trap_v_ldst.c.
Fixes: c2acc5e5b0 ("lib: sbi_misaligned_ldst: Add handling of vector load/store")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The following error is observed when compiling fdt_cppc_rpmi
driver using LLVM:
lib/utils/cppc/fdt_cppc_rpmi.c:87:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
87 | u64 db_val_u64 = 0;
To fix the above issue, move the variable declaration at the
start of function.
Fixes: 591a98bdd5 ("lib: utils/cppc: Add RPMI CPPC driver")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add misaligned load/store handling for the vector extension
to the sbi_misaligned_ldst library.
This implementation is inspired from the misaligned_vec_ldst
implementation in the riscv-pk project.
Co-developed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add a generic RPMI mailbox client driver which provides a MPXY channel.
Initially, this driver only supports RPMI clock service group but can
be extended to support multiple RPMI service groups.
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple MPXY drivers so add a simple
FDT based MPXY driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Implement the SBI MPXY extension which provides an SBI interface to
the supervisor software for send messages via MPXY framework.
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple CPPC drivers so add a simple
FDT based CPPC driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The RPMI HSM service group provides set of routine to query and control
power states of a Hart. Add RPMI based Hart State Management (HSM) driver.
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
It should possible to fixup FDT from any part of OpenSBI so add
fdt_register_general_fixup() which allows dynamic registration of
FDT fixup callbacks.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
