When an extension implements a probe function it means there's a
chance that the extension is not available. Use this function in the
register_extensions callback to determine if the extension should be
registered at all. Where the probe implementation is simple, just
open code the check.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We have redundant semicolon at quite a few places so let's remove it.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since sbi_pmu_init is called after sbi_console_init,
the sbi_printf can be called when sbi_pmu_init fails.
Signed-off-by: Tan En De <ende.tan@starfivetech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We introduce sbi_entry_count() function which counts the number
of times a HART enters OpenSBI via cold-boot or warm-boot path.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Since commit 50d4fde1c5 ("lib: Remove redundant sbi_platform_ipi_clear()
calls"), the IPI sent from the boot hart in wake_coldboot_harts() is not
cleared in the secondary harts until they reach sbi_ipi_init(). However,
sbi_hsm_init() and sbi_hsm_hart_wait() are called earlier, so a secondary
hart might enter sbi_hsm_hart_wait() with an already pending IPI.
sbi_hsm_hart_wait() makes sure the hart leaves the loop only when it is
actually ready, so a pending unrelated IPI should not cause safety issues.
However, it might be inefficient on certain hardware, because it prevents
"wfi" from stalling the hart even if the hardware supports this, making the
hart needlessly spin in a "busy-wait" loop.
This behaviour can be observed, for example, in a QEMU VM (QEMU 7.2.0) with
"-machine virt" running a Linux guest. Inserting delays in
sbi_hsm_hart_start() allows reproducing the issue more reliably.
The comment in wait_for_coldboot() suggests that the initial IPI is needed
in the warm resume path, so let us clear it before init_warm_startup()
only.
To do this, sbi_ipi_raw_clear() was created similar to sbi_ipi_raw_send().
Signed-off-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Move them into sbi_hsm_hart_start_finish() and sbi_hsm_hart_resume_finish()
to make them easier to manage.
This will be used by subsequent patches.
Suggested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add the SUSP extension probe and ecall support, but for now the
system suspend function is just a stub.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Print the RW section offset when firmware base and size is
being printed.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We add an optional cold_boot_allowed() platform callback which allows
platform support to decide which HARTs can do cold boot initialization.
If this platform callback is not available then any HART can do cold
boot initialization.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
C language standard uses true/false for the boolean type.
Let's switch to that for better language compatibility.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Let us print the platform PMU device name at the boot-time so that users
know whether the underlying platform has custom per-HART PMU operations.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Since past few years, we have been using "hart features" in OpenSBI
to represent all optionalities and multi-letter extensions defined
by the RISC-V specifications.
The RISC-V profiles specification has taken a different approach and
started assigning extension names for all optionalities which did not
have any extension name previously.
(Refer, https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc)
Inspired from the RISC-V profiles specification, we convert OpenSBI
hart features into hart extensions. Going forward, we align the
extension naming with RISC-V profiles specification. Currently, only
"time CSR" and "AIA CSR" have not been assigned extension name but
for everything else we have a name.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The ISA string printed at boot time is not the complete ISA string
representing all single letter and multi-letter extensions rather
it is base ISA string derived from misa CSR so let us update the
boot print accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
It is possible to guess privileged spec versions based on the CSRs
that where introduced in different privileged spec versions. In
future, if we are not able guess privileged spec version then we
can have platform provide it.
We add privileged spec version as per-hart feature and try to guess
it based on presence of mcounteren, mcountinhibit, and menvcfg CSRs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Currently, the external interrupt handling is scattered between
sbi_init and sbi_trap. This patch moves all external interrupt
handling into a simple framework called sbi_irqchip.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We can have IPIs based on external interrupts provided by devices
such as AIA IMSIC so we should enable mie.MEIE bit at appropriate
places in generic library.
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We introduce nascent_init() platform callback which will allow
platforms to do very early initialization of platform specific
per-HART CSRs and per-HART devices.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Moving the sbi_boot_print_general() call after the
sbi_platform_final_init() call allows to print devices initialized in the
latter.
To keep the overall print sequence the same also move
sbi_boot_print_domains().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When we are doing opensbi development, we want to know the build time
and compiler info for debug purpose.
To enable this message, please add "BUILD_INFO=y", like:
```
make BUILD_INFO=y
```
NOTE: Using `BUILD_INFO=y` without specifying SOURCE_DATE_EPOCH will
violate "reproducible builds". So it's ONLY for development and debug
purpose, and should NOT be used in a product which follows "reproducible
builds".
Signed-off-by: Wei Fu <wefu@redhat.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
To support different handlers for different types of resets, we are
adding a sbi_list of restart handlers.
Instead of sbi_system_reset_set_device we use
sbi_system_reset_add_device to reflect the actual meaning.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We now have frequency in timer device instance provided by platform
so let's print timer frequency as part of the boot prints.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
RISC-V SBI v0.3 specification defined a PMU extension to configure/start/stop
the hardware/firmware pmu events.
Implement PMU support in OpenSBI library. The implementation is agnostic of
event to counter mapping & mhpmevent value configuration. That means, it
expects platform hooks will be used to set up the mapping and provide
the mhpmevent value at runtime.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Compiling wake_coldboot_harts() with GCC 11 and -Wextra yields:
lib/sbi/sbi_init.c:208:27:
error: comparison of integer expressions of different signedness:
‘int’ and ‘u32’ {aka ‘unsigned int’} [-Werror=sign-compare]
208 | for (int i = 0; i <= sbi_scratch_last_hartid(); i++) {
| ^~
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The parameter owner of function sbi_scratch_alloc_offset() is never used.
The scratch memory is small. We should not use it for debug information in
future. Hence eliminate the parameter.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We extend the boot-time prints to show various devices provided
(or registered) by the platform support. This will help users
verify hardware devices available for OpenSBI firmwares.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having ipi_send() and ipi_clear() callbacks in
platform operations, it will be much simpler for ipi driver
to directly register these operations as a device to sbi_ipi
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The sbi_platform_ipi_clear() called from wait_for_coldboot() and
sbi_hsm_hart_wait() is redundant because IPI will be automatically
cleared by sbi_platform_ipi_init() called from sbi_ipi_init().
Further, wait_for_coldboot() is common for warm startup and warm
resume path so the sbi_platform_ipi_clear() called in warm resume
path cause resuming HART to miss an IPI injected other HART to
wakeup the HART.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch implements the SBI HSM suspend function. Using this
new SBI call, the S-mode software can put calling HART in platform
specific suspend (i.e. low-power) state. For a successful retentive
suspend, the SBI call will return without errors upon resuming
whereas for a successful non-retentive suspend, the SBI call will
resume from a user provided resume address.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Currently, we have all boot prints at the end of cold boot sequence
which means if there is any failure in cold boot sequence before
boot prints then we don't get any print.
This patch improves boot prints in cold boot sequence as follows:
1. We divide the boot prints into multiple parts and print it
from different locations after sbi_console_init()
2. We throw an error print if there is any failure in cold boot
sequence after sbi_console_init()
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We know about pmp granularity and number of bits supported by PMP.
Show those information in the boot time info print
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We extend boot prints to display details of each domain. In the
process, we remove sbi_hart_pmp_dump() because it shows redundant
information which domain details already show.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
An OpenSBI domain is a logical entity representing a set of HARTs
and a set of memory regions for these HARTs.
The OpenSBI domains support will allow OpenSBI platforms and previous
booting stage (i.e. U-Boot SPL, Coreboot, etc) to partition a system
into multiple domains where each domain will run it's own software.
For inter-domain isolation, OpenSBI will eventually use various HW
features such as PMP, ePMP, IOPMP, SiFive shield, etc but initial
implementation only use HW PMP support.
This patch provides initial implementation of OpenSBI domains where
we have a root/default domain and OpenSBI platforms can provide
non-root/custom domains using domain_get() callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The hartid parameter of sbi_hart_init() is not used anywhere in
sbi_hart_init() implementation so let's remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We factor-out PMP configuration from sbi_hart_init() as a separate
sbi_hart_pmp_configure() function and do the PMP configuration very
late in coldboot and warmboot path just before platform_final_init().
Eventually, this enable us to configure PMP totally based on OpenSBI
domain where OpenSBI domains can be parsed from device-tree in any of
the platform operations except platform_final_init().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
The coldboot HART jumps to the next booting stage at the end of
init_coldboot() so it is absolutely necessary for coldboot HART
to support the privilege mode expected by the next booting stage.
We extend the coldboot HART selection in sbi_init() to ensure that
the selected coldboot HART always supports privilege mode specified
in scratch space (i.e. scratch->next_mode). This will further help
us allow E-core (without MMU) on SiFive Unleashed and PolarFire
ICICLE boards to proceed further and wait in HSM STOPPED state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
A RISC-V platform can leave unimplemented MHPM counters hard-wired
to zero. We extend hart_detect_features() to detect MHPM counters
which are accessible and not hard-wired to zero. We also print
number of available MHPM counters as part of boot prints.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can have thundering hurd problem with coldboot_lock where the
boot HART can potentially starve trying to acquire coldboot_lock
because some of the non-boot HARTs are continuously acquiring and
releasing coldboot_lock. This can happen if MIP.MSIP bit is already
set for some of the non-boot HARTs.
To avoid thundering hurd problem for coldboot_lock, we use the
__smp_load_acquire() and __smp_store_release() for coldboot_done
flag and use coldboot_lock only for coldboot_wait_hmask.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
It is not mandatory for a RISC-V systems to implement all PMP
regions so we have to check all PMPADDRx CSRs to determine excat
number of supported PMP regions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
It makes more sense to have scratch pointer as parameter in
HART feature APIs because:
1. We already have scratch pointer at places where these APIs
are used.
2. This is consistent with lot of other APIs in sbi_hart.h
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
On platforms with continuous HART ids starting from zero:
0 <= boot HART id < platform HART count
The above co-relation of boot HART id and platform HART count
is true for most RISC-V platfors so it's better to print platform
HART count just before boot HART id.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We do following improvements for get_feature_str():
1. We should return "none" from get_feature_str() no features
available instead of sbi_boot_prints() explicitly handling
failure.
2. We don't need to return failure (just like misa_xlen())
because we are returning "none" for no features and we are
truncating output when space is not available.
3. Based on 1 and 2, the sbi_boot_prints() can be further
simplified.
4. No need for two char[] in sbi_boot_prints()
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We have now clear distinction between platform and hart features.
Modify the boot print messages to print hart specific features in
a string format.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We have now clear distinction between platform and hart features.
Modify the boot print messages to print platform features in a string
format. In the process, this patch moved relatively larger functions
to its own file from platform.h header file.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The RISC-V ISA string does not follow alphabetical order. Instead,
we have a RISC-V specific ordering of extensions in the RISC-V ISA
string. This patch improves misa_string() implementation to return
a valid RISC-V ISA string.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that we have generic platform which detects hart count from
DTB, we should print platform hart count at boot time.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The patch adds sbi_scratch_last_hartid() API which returns
last HART id having a scratch space. We can use this new API
to optimize places where we iterate over HART id from 0 to
SBI_HARTMASK_MAX_BITS.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
