Turns out it doesn't behave as expected on MacOS, it doesn't honor
-n and echoes that to the file instead. Add a slash and just let
the newline be there instead.
Signed-off-by: Olof Johansson <olof@lixom.net>
Some toolchains might not have all the CSRs available (as seen with
GCC 7.2). So, instead use the defined CSR_ values.
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch updates doxygen config file to include
docs/platform_guide.md and docs/library_usage.md in
generated PDF document.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Currently, only hart 1 is enabled for fu540 platform to support U-boot.
Introduce a compile time FU540_ENABLED_HART_MASK option so that specific
harts can be selected for booting. As fu540 is a multicore, we should
boot all cores by default except hart 0.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Currently, the OpenSBI version is in top-level Makefile so
firmware linking to OpenSBI static library have no-way to
know OpenSBI version.
This patch moves OpenSBI version from top-level Makefile to
sbi/sbi_version.h header which provides OPENSBI_VERSION_MAJOR
and OPENSBI_VERSION_MINOR defines.
NOTE: the SBI spec (or SBI ecall interface) version is
different. The SBI spec version is provided by functions
sbi_ecall_version_major() and sbi_ecall_version_minor().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Provide an overview of all supported firmware files and point to each
firmware type documentation file.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Explicitely mention that this project adheres to the Developer
Certificate of Origin (DCO) and include this short text.
Also reformat the file to have lines bounded at 80 chars and add some
more details regarding the expected commit message format.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Also make sure that this file contains only the official BSD 2-clause
license text, nothing else.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <anup.patel@wdc.com>
For better naming, we rename ipi_inject() to ipi_send() in
struct sbi_platform. We also replace term "inject" with
"send" in all related places.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
It is not necessary that platform has MMIO-based timer value
register. It can also have some custom (implementation specific)
CSR for timer value.
This patch renames SBI_PLATFORM_HAS_MMIO_TIMER_VALUE to
SBI_PLATFORM_HAS_TIMER_VALUE to imply "platform timer value"
instead of "mmio timer value".
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The target_hart and hartid paramter of TIMER callbacks is not
required because it always current hartid which can be obtained
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The hartid parameter in IRQCHIP callbacks of sbi_platform
is not required because current hartid can be determined
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The source_hart and hartid parameter is really not required in
IPI callbacks of sbi_platform because current hartid can always
be obtained by calling sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Add a space before (FW_JUMP) to make it more readable.
This also fixes "No newline at end of file" warning.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
There are 2 markdown links that are currently broken in top-level
README.md. Fix them so that github could render the URL correctly.
This also fixes "No newline at end of file" warning.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
This patch adds doxygen style documenation for struct sbi_platform
and related functions/macros/defines.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
We don't need to pre-enable MSIP in MIE CSR when
calling sbi_init() from firmware. This patch updates
documentation accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
We don't need to install generic headers separately for every
platforn under <install_dir>/platform. It is unnecessary duplication
of files hence updating install_libplatsbi in top-level makefile.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The PDF document generated by doxygen should have OpenSBI version
hence this patch adds OpenSBI version to doxygen.cfg.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
As per the RISC-V ISA, mideleg and medeleg registers should not exist
if S-mode is not present for a hart.
We shouldn't access these CSRs if non S-mode harts.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
S-mode software may send IPI to self. For example,
tlbflush may be executed for the same hart.
Let the hart send IPI to itself. It's an overhead
but doesn't break anything. However, if we don't
allow it, it breaks if S-mode keep sending IPIs.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
IPIs are updated in scratch space by source hart.
However, different harts or same hart may want to
send different IPIs before previous IPI was read
by the target hart. Currently, previous IPI type
is overwritten in that case.
Use atomic bit set/clear operations to update IPIs.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The secondary hart waits for an IPI signal from the boot hart to
executing boot code (hot boot). As a result, software generated
interrupts have to be enabled for secondary harts before waiting for
the boot hart boot completion IPI signal.
Enabling software generated interrupts (IPI) can be done independently
of the firmware code and moved to libsbi code so that the different
firmware do not have to implement this.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
We should use AMO instructions whenever __riscv_atomic is
defined (i.e. atomics are supported). We use LR/SC only when
__riscv_atomic is not defined.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Define sbi_ecall_console_puts() using sbi_ecall_console_putchar()
renamed as sbi_ecall_console_putc() and remove the hardcoded version
of the same funtion in the test payload code.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
The Kendryte k210 board initial loader does not provide a device tree
for the firmware and subsequent payload. Add the k210.dts device tree
description file to solve this. This file describes only the SoC core
components: CPUs, memory and PLIC.
Automatically compile and add this file to the firmware generated
using the FW_PAYLOAD_FDT_PATH configuration parameter.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Repeating "ifdef CROSS_COMPILE" multiple times does not help with
readability. Simplify by grouping compilation command setup under a
single ifdef statement.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Add rules to compile dts files into dtb files using the device tree
compiler (dtc). A platform can specify the DTS file to compile using
the platform-dtb-y variable. The flattened device tree binary file to be
used for building the final polatform firmware can be specified using
the new FW_PAYLOAD_FDT firmware configuration option to point to the
automatically compiled FDT file. Using the existing FW_PAYLOAD_FDT_PATH
configuration option is still possible and will take precedence over
the FW_PAYLOAD_FDT definition.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Use commonly accepted styles: newlines after declarations and before
return to make the code more readable.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
The firmware payload offset defined by FW_PAYLOAD_OFFSET must
specify a value large enough so the the payload does not overlap
with the base firmware data, bss and text. For platforms without
any strong requirement on the payload address, introduce the
FW_PAYLOAD_ALIGN build parameter to automatically place the payload
right after the base firmware at an address aligned with the defined
value.
Either FW_PAYLOAD_OFFSET or FW_PAYLOAD_ALIGN should be defined by a
platform configuration. If both FW_PAYLOAD_OFFSET and FW_PAYLOAD_ALIGN
are defined by a platform, FW_PAYLOAD_OFFSET has precedence and is
used for building the final firmawre image.
Using FW_PAYLOAD_ALIGN=4096 with the Kendryte platform rather than
the abitrary FW_PAYLOAD_OFFSET=0x10000 value reduces the final
firmware image size by about 20KB.
Add a description of the FW_PAYLOAD_ALIGN configuration parameter in the
fw_payload documentation file as well. And while at it, also fix
various grammar and style issues in that file..
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
