The define is hard to read. The continue statement does not do what was
intended.
* Remove do {} while (false);
* Change the name to set_multi_letter_ext
- Other local macros are lower case too.
- Refer to the fact that this is only used for multi-letter extensions.
Addresses-Coverity-ID: 1568359 Unexpected control flow
Fixes: d72f5f1747 ("lib: utils: Add detection of Smepmp from ISA string in FDT")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
hart_exts == NULL can only occur if offset and node address lead to an
overflow resulting in exactly NULL. As we don't catch other values of
overflow it does not make sense to treat this one as special.
Addresses-Coverity-ID: 1568355 Logically dead code
Addresses-Coverity-ID: 1568358 Logically dead code
Fixes: 6259b2ec2d ("lib: utils/fdt: Fix fdt_parse_isa_extensions() implementation")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
'1' is a 32 bit integer. When shifting it by more than 31 bits it becomes
zero and we get an incorrect return value.
Addresses-Coverity-ID: 1568356 Bad bit shift operation
Fixes: 296e70d69d ("lib: sbi: Extend sbi_hartmask to support both hartid and hartindex")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The added memory region should start from the base address.
Otherwise, the range will be shifted by reg_offset and not
able to merge consecutive NAPOT regions in the root domain,
resulting in wasted PMP entries.
Fixes: e8bc1621 ("lib: utils/serial: Add shared regions for
serial drivers")
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The base of .text is defined by `FW_TEXT_START`, not `FW_TEXT_BASE`.
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since everything is statically linked, we don't need to expose symbols
for dynamic linking.
For a default build this saves about 2 KiB of useless read only data in
.dynsym, .dynstr, .hash, .gnu.hash sections.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since everything is statically linked, we won't actually have
R_RISCV_{32,64} relocations. No need to handle these.
Fixes: 0f20e8adcf ("firmware: Support position independent execution")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The .rela.dyn section should be exactly the size of the relocations,
without padding. On RV64, .rela* sections are already aligned and
there's no need for padding. On RV32, this adds padding up to 4 bytes,
which, if present, confuses the relocation loop into processing an extra
entry past the end of .rela*, and it crashes with an invalid memory
access.
Fixes: 0f20e8adcf ("firmware: Support position independent execution")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The TLB entries remain functional all the time once added in T-HEAD th1520
and Sophgo sg2042 (even if the MMU is then disabled afterwards). If there
are some stale TLB entries that contains the address of SBI, it will cause
unexpected memory access and issue a illegal instruction error. To avoid
this, a TLB flush is needed to drop these TLB entries before any memory
access in the trap handler.
To handle this workaroud, add a custom trap handler with executing TLB flush
first in the T-HEAD platform to fix affected socs.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The syscon region used by OpenSBI should be marked as a shared
read-write region between M-mode and SU-mode.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
The serial driver regions used by OpenSBI should be marked as a shared
read-write regions between M-mode and SU-mode as those are accessed
by earlycon and the corresponding tty serial drivers running in 'S' mode.
When the smepmp extension is enabled, PMP entries for these shared regions
will get programmed.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Based on sections 4.c and 4.d in Ch.2 of the Smepmp spec the PMP entries
must be programmed as below:
1. Program M-only entries
2. Enable mseccfg.MML
3. Program shared-region entries
4. Program SU-only entries
Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The Smepmp read-only shared region must have pmpcfg.L, pmpcfg.R,
pmpcfg.W, and pmpcfg.X bits set so sbi_hart_get_smepmp_flags()
must return pmp_flags accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
The mseccfg.MML bit is a sticky bit which remains unchanged once set
so no need to clear it in sbi_hart_smepmp_configure().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Let us factor-out Smepmp configuaration as separate function so
that code is more readable.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
The macros to test permissions must perform an exact match of all the
bits in the input with the desired permission bits. Otherwise, the check
returns false positives in those cases where only some of the desired
permissions are set in the input.
Fixes: 6c202c5 ("include: sbi: Add Smepmp specific access flags for PMP
entries")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_hartmask_for_each_hart() macro is slow and has only one user
so let us completely remove the sbi_hartmask_for_each_hart() macro.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us maximize the use of HART index in sbi_domain because hartindex
based hartmask access and sbi_scratch lookup is faster.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The sbi_scratch_last_hartid() macro is not of much use on platforms
with really sparse hartids so let us replace use of this macro with
other approaches.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us prefer hartindex over hartid in IPI framework which in-turn
forces IPI users to also prefer hartindex.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The sbi_hartid_to_scratch() involves translating hartid to hartindex
which is expensive so let's use sbi_hartindex_to_scratch() instead.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Currently, the sbi_hartmask is indexed by hartid which puts a
limit on hartid to be less than SBI_HARTMASK_MAX_BITS.
We extend the sbi_hartmask implementation to use hartindex and
support updating sbi_hartmask using hartid. This removes the
limit on hartid and existing code works largely unmodified.
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The hartid to hartindex mapping is now tracked in sbi_scratch so we
don't need sbi_platform_hart_index() and sbi_platform_hart_invalid()
functions hence let us remove them.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We introduce HART index and related helper functions in sbi_scratch
where HART index is contiguous and each HART index maps to a physical
HART id such that 0 <= HART index and HART index < SBI_HARTMASK_MAX_BITS.
The HART index to HART id mapping follows the index2id mapping provided
by the platform. If the platform does not provide index2id mapping then
identity mapping is assumed.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We found the mstatus.FS status is not set correctly after the SET_F64_REG()
and SET_F32_REG(). We should set mstatus.FS dirty after we emulate the FPU
instructions.
Co-developed-by: Roy Lin <roy.lin@sifive.com>
Signed-off-by: Roy Lin <roy.lin@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If the system is defined from tlb_fifo_num_entries, the scratch may be
too small to hold the fifo, so it is alloc through the heap.
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Xing Xiaoguang <xiaoguang.xing@sophgo.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For some platforms with a particularly high number of harts, if the
tlb fifo is too small, it case harts to wait. Platforms should be
allowed to specify the size of the tlb fifo.
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Xing Xiaoguang <xiaoguang.xing@sophgo.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
After the hardware hpm counter is stopped, it should not raise any new
interrupt as it is already stopped. So add the hw_counter_disable_irq
callback to allow the custom pmu device to control this behavior.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Samuel Holland <samuel@sholland.org>
T-HEAD c9xx pmu needs to clear OV bits of MCOUNTEROF in any condition
to avoid unnecessary OF interrupts.
In addition, the S-mode SCOUNTEROF only have OF bit set when the related
bits of MCOUNTERWEN is set, so also configure MCOUNTERWEN to allow kernel
to access valid SCOUNTEROF.
Signed-off-by: Haijiao Liu <haijiao.liu@sophgo.com>
Co-authored-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Samuel Holland <samuel@sholland.org>
When detecting features of PMU, the hpm counter may be written to some
value, this will cause some unexpected behavior in some cases. So ensure
the hpm counter is updated before starting the counter and the related
interrupt.
Signed-off-by: Haijiao Liu <haijiao.liu@sophgo.com>
Co-authored-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Samuel Holland <samuel@sholland.org>
The previous definition had the assumption that the machine word length
is equal to the word length of LONG. Remove this assumption and add a
static check to prevent errors in subsequent modifications.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As the the "Console Putchar" extension is already legacy and may
be removed in the furture. So replace it with the SBI v2.0 "DBCN"
extension.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
After supporting noncontigous hpm event and counters in opensbi, the
number of hpm counters can be calculated by the mhpm_mask. So this field
is unnecessary and can be removed to save some space.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
grep (at least my version, grep-3.8-3.fc38.x86_64) warns with
"grep: warning: stray \ before -". Fix the warning by making
the command line input to grep less ambiguous.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This adds the support for ISA extension smcntrpmf. When some inhibit flags
are set by a lower privilege mode for new CSRs added by smcntrpmf, OpenSBI
sets the appropriate values correspondingly.
Signed-off-by: Kaiwen Xue <kaiwenx@andrew.cmu.edu>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Attempting to build OpenSBI with clang 16 and the following command:
$ make LLVM=1 PLATFORM=generic
Results in the following error:
AS platform/generic/firmware/fw_dynamic.o
/tmp/fw_dynamic-d000a6.s:429:9: error: symbol '_fw_start' can not be undefined in a subtraction expression
.dword _fw_rw_start - _fw_start
Work around this issue by eliminating the __fw_rw_offset variable and
performing the offset calculation at run-time instead. This takes
advantage of the fact that the a4 register contains the value of
_fw_start.
Signed-off-by: Mitchell Horne <mhorne@FreeBSD.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cycle and instructions are hardware events instead of firmware ones. Fix
the typo in the name of this function.
Signed-off-by: Kaiwen Xue <kaiwenx@andrew.cmu.edu>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Anup patel <anup@brainfault.org>
Currently, the fdt_parse_isa_extensions() tries to parse the ISA
string once for each HART. This ISA string parsing can fail for
secondary HARTs if the FDT memory is already overwritten by the
supervisor OS.
To tackle this issue, we improve the fdt_parse_isa_extensions()
implementation to pre-parse ISA string for all HARTs during
cold boot.
Fixes: d72f5f1747 ("lib: utils: Add detection of Smepmp from ISA
string in FDT")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-By: Mayuresh Chitale<mchitale@ventanamicro.com>
Platforms may implement hpm events/counters non contiguously but the current
implementation assumes them to be always contigous. Add a bitmap that
captures the hpm events/counters as implemented in the hardware and use
it to set the max limit of hardware counters visible to the OS. Counters
not implemented in the hardware can't be used by the OS because those
wont be described in the DT.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Nowadays, most of the editor use files or directories begin with dot to
store some settings. So let git ignore these files and directories to
reduce potential mistakes.
Add dot match to ignore any editor file and there are two exceptions:
- .gitignore
- .clang-format
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The functionality of SiFive Test reset driver is easily available
through Syscon reset driver so let us remove the SiFive Test driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us have common FDT based reset driver for syscon reboot and
poweroff. The device tree bindings for syscon reboot and poweroff
are already available in the Linux kernel sources.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Let us add a simple FDT based system regmap driver which follows the
device tree bindings already defined in the Linux kernel.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add a simple FDT based regmap framework which is built on top of
generic regmap library. The phandle of FDT regmap DT node is treated
as unique regmap ID. The FDT based regmap drivers will be probed
on-demand from fdt_regmap_get_by_phandle() and fdt_regmap_get()
called by the regmap client drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add generic regmap access library which is independent of
hardware description format (FDT or ACPI). The OpenSBI platform
support or regmap drivers can register regmap instances which
can be discovered by different regmap clients based on the
unique ID of regmap instances.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The "driver" pointer in struct i2c_adapter is not used anywhere
so let us remove it.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Because the CSR names in the spec are mseccfg and mseccfgh. Remove
CSR_MSECCFG_LOWER and CSR_MSECCFG_UPPER and directly define
CSR_MSECCFG and CSR_MSECCFGH.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
commit 68e66106120f ("SUSP: Add SBI_ERR_DENIED") of the SBI spec adds
a new error code, SBI_ERR_DENIED, which is returned when entry criteria
has not be meant. Update the system suspend implementation to return
this error when it has detected that not all harts are in the STOPPED
state.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
