Currently, the per-HART scratch size is 256 bytes on RV32 and
512 bytes on RV64. This patch set per-HART scratch size to 4KB
(4096 bytes) for both RV32 and RV64 so that we don't run-out
of scratch space anytime soon.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
All platform except kendryte/k210 use 8KB of per-HART stack hence
this patch set per-HART stack size of kendryte/k210 to 8KB for
consistency.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch extends our bit operation library with mechanism to:
1. Iteratively traverse bits
2. Set bit
3. Clear bit
4. Change bit
5. ... other helpful functions ...
Most the above is adopted from Xvisor sources.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The right location for all bits related defines and macros is
sbi_bitops.h hence this patch. With this patch, the sbi_bits.h
is redundant so we remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
There has already been a commit to master which added 32-bit specific
fdt/payload addresses for the sifive/fu540 platform [0]. This commit
introduces another change for using sifive/fu540 as a 32-bit platform.
On 32-bit platforms, cores with the SV32 MMU type should not be
disabled. For this reason, this commit also allows using this MMU type
on the sifive/fu540 platform.
Alternatively it would also be possible to only allow SV39 and SV48 if
`__riscv_xlen == 64` and SV32 if `__riscv_xlen == 32`. Removing the
check entirely would also be an option.
[0]: 66fb729a1e
Signed-off-by: Sören Tempel <tempel@uni-bremen.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
As per the RISC-V privilege specification, WFI can be implemented as
a NOP. Software should ensure that relevant interrupt pending bits
are set. Otherwise, loop back to WFI.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
SBI HSM extension defines possible hart status values in the
specification.
Define all possible status values. Add a helper function to
convert hart state to status because hart states are internal
to OpenSBI only and may not match the status values defined in
the specification.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch adds support for hart hotplug in OpenSBI using a generic WFI
based approach. Hart hotplug can be achieved via SBI HSM extension which
allows supervisor mode software to start or stop any harts anytime.
Any platform wishes to implement platform specific hart hotplug must
implement both hart_start and hart_stop in addition to enable platform
feature SBI_PLATFORM_HAS_HART_HOTPLUG.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
A platform may have a specific method to bring-up secondary harts for the
first time but may rely on generic WFI based approach for hart hotplug in
absence of a platform specific hart hotplug method.
Define a platform feature flag for such platforms. The platform needs to
implement platform specific bring-up method in hart_start and not define
hart_stop method in this case. They must only define
SBI_PLATFORM_HAS_HART_SECONDARY_BOOT.
SBI_PLATFORM_HAS_HART_HOTPLUG should only be defined when the platform
intend to support both hart_start and hart_stop and do not intend to rely
on generic WFI based approach.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We don't need to separately call sbi_ipi_send() for current HART
in sbi_ipi_send_many(). Instead, we can simplify the for-loop in
sbi_ipi_send_many() and call sbi_ipi_send() for all HARTs in the
for-loop itself.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
As per the latest SBI specification, all online harts should receive
IPI if hbase is set to -1.
Set the target mask to all available hart mask if hbase is -1.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There is a typo in atomic operations code which prevents the
usage of riscv atomic instructions even if it is supported.
Fix the typo.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
For testing 32-bit SiFive specific drivers with QEMU riscv32, add
32-bit specific FW_JUMP_FDT_ADDR and FW_PAYLOAD_OFFSET.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We print MIDELEG and MEDELEG CSRs as part of boot prints so that
boot log shows the interrupts and exceptions delegated to S-mode.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The MIDELEG and MEDELEG CSR checks at end of delegate_traps() were
added for initial bring-up on SiFive Unleashed and QEMU. These
checks are not required any more and in-future these checks can
cause failures because some of the MIDELEG/MEDELEG bits will be
hard-wired to 0 or 1.
For related discussion, refer github issue:
https://github.com/riscv/opensbi/issues/157
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When building 32-bit OpenSBI images, we get:
lib/utils/sys/htif.c: In function '__check_fromhost':
lib/utils/sys/htif.c:12:31: error: left shift count >= width of type
[-Werror=shift-count-overflow]
#define HTIF_DATA_MASK ((1UL << HTIF_DATA_BITS) - 1)
^~
Fixes: c2f23cc6ed ("platform: Add Spike initial support")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This reverts commit 897b8fbdd9.
We are seeing compile errors using newlib based GCC cross-toolchain
so we restore back old ctz() implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
- make title underline the same length as the title itself
- satisfy the 80 character per line rule as much as possible
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
- make title underline the same length as the title itself
- put all URLs at the end of the doc
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Various styles fixes including:
- satisfy the 80 character per line rule as much as possible
- make title underline the same length as the title itself
- remove the redundant FPGA (was FPGA FPGA SoC)
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Various styles fixes including:
- satisfy the 80 character per line rule as much as possible
- remove unnecessary spaces between words
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
- put all URLs at the end of the doc
- satisfy the 80 character per line rule as much as possible
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch adds documentation to build and run OpenSBI on
Spike simulator and QEMU Spike machine.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The Spike platform support works perfectly fine on QEMU RV64 Spike
machine and Spike emulator.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This patch removes stale options from config.mk files of
Ariane FPGA and QEMU virt platform support.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
To initialize PLIC in sane state, we should:
1. set maximum threshold value of M-mode PLIC contexts
2. set maximum threshold value of S-mode PLIC contexts
3. set irq priorities to miniumum
Fix the comment and initialize the threshold/priorities correctly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
As per the SBI specification, the return value in sbiret is undefined
if not explicitly described in the function. However, supervisor may
check this value by mistake and get a garbage value.
Initialize it to zero to avoid nasty supervisor bugs.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Document that when U-Boot v2020.01 (or higher) is used as the payload,
we need adjust the instructions a little bit when testing OpenSBI with
QEMU 'sifive_u' machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
With QEMU v4.2 RISC-V changes to improve the emulation fidelity
of 'sifive_u' machine, OpenSBI v0.4 / U-Boot v2019.10 / Linux
kernel v5.3 images built for the SiFive HiFive Unleashed board
can be used out of the box without any special hack. Hence there
is no need for us to continue supporting such a special target in
OpenSBI. Going forward, sifive/fu540 platform can be used on both
real hardware and QEMU 'sifive_u' machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
On macOS the readlink command does not include a -f flag. Instead default
to using GNU readlink (which is often installed as greadlink).
Signed-off-by: Alex Richardson <Alexander.Richardson@cl.cam.ac.uk>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
It was reported that tlb range flush is not working on fu540.
Only tlb full flush seems to work on fu540 probably due to some
hardware errata.
Set the tlb flush limit to zero so that all tlb flush requests
are converted to full flush.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
If a platform requires to perform a tlb full flush, they should set
the tlb_range_flush_limit value to zero. However, corresponding platform
API ignore the value and continue to return the default value.
Add a platform ops to retrieve platform specific tlb range flush limit.
The platform variable becomes redundant in presence of the platform ops.
Take this opportunity to remove the variable as well.
The default is still set to smallest page size in RISC-V (4KB), as there
is no way to figure out a best value for all platforms. Individual platform
should set it to the optimal value for their platform.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch factor-out SBI base extension into its own source
for better modularity of SBI implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch factor-out SBI vendor extension into its own source
for better modularity of SBI implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
