Before the ratification of Sscofpmf, the Andes PMU extension
was designed to support the sampling and filtering with hardware
performance counters (zihpm), it works with the current SBI PMU
extension and Linux SBI PMU driver.
We implement 1) the PMU device callbacks that update the
corresponding bits on custom CSRs, 2) extentions_init() to detect
the hardware support of Andes PMU and initialize the per-hart
PMU related CSR, and 3) pmu_init() to register PMU device and
populate event mappings.
Also define a andes_pmu_setup() function which is in preparation
for adding default PMU mappings in andes_hpm.h
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add support for custom PMU extensions to set inhibit bits
on custom CSRs by introducing the PMU device callback
hw_counter_filter_mode(). This allows the perf tool to
restrict event counting under a specified privileged
mode by appending a modifier, e.g. perf record -e event:k
to count events only happening in kernel mode.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch makes the following changes:
- As sbi_platform_pmu_init() returns a negative error code on
failure, let sbi_pmu_init() print out the error code with
sbi_dprintf().
- In order to distinguish the SBI_EFAIL error returned by
sbi_pmu_add_*_counter_map(), return SBI_ENOENT to indicate
that fdt_pmu_setup() failed to locate "riscv,pmu" node, and
generic_pmu_init() ignores such case.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The old scheme doesn't allow sending hart0 self-IPI as the
corresponding bit on pending register is hardwired to 0, this
could lead to unhandle IPIs on SMP systems, esp. on single-core.
Furthermore, the limitation of old scheme is 8-core, instead of
reserving source hart information, we assign bit (x + 1) as the
enable and pending bit of hartx, this also expands the bootable
hart number.
The following diagram shows the enable bits of the new scheme
on 32-core Andes platform.
Pending regs: 0x1000 x---0---0---0---0------0---0
Pending hart ID: 0 1 2 3 ... 30 31
Interrupt ID: 0 1 2 3 4 ... 31 32
| | | | | | |
Enable regs: 0x2000 x---1---0---0---0-...--0---0---> hart0
| | | | | | |
0x2080 x---0---1---0---0-...--0---0---> hart1
| | | | | | |
0x2100 x---0---0---1---0-...--0---0---> hart2
| | | | | | |
0x2180 x---0---0---0---1-...--0---0---> hart3
. . . . . . .
. . . . . . .
. . . . . . .
0x2f00 x---0---0---0---0-...--1---0---> hart30
| | | | | | |
0x2f80 x---0---0---0---0-...--0---1---> hart31
<-------- word 0 -------><--- word 1 --->
To send IPI to hart0, for example, another hart (including hart0
itself) will set bit 1 of first word on the pending register.
We also fix indentation in andes_plicsw.h along with this patch.
Fixes: ce7c490719 ("lib: utils/ipi: Add Andes fdt ipi driver support")
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Randolph <randolph@andestech.com>
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005665.html
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, there are no barriers before or after the ipi_clear()
device callback which forces ipi_clear() device callback to always
use non-relaxed MMIO writes.
Instead of above, we use wmb() in after the ipi_clear() device
callback which pairs with the wmb() done before the ipi_send()
device callback. This also allows device ipi_clear() callback
to use relaxed MMIO writes.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reported-by: Bo Gan <ganboing@gmail.com>
Currently, we have a smp_wmb() between atomic_raw_set_bit() and
ipi_send() device callback whereas the MMIO writes done by the
device ipi_send() callback will also include a barrier.
We can avoid unnecessary/redundant barriers described above by
allowing relaxed MMIO writes in device ipi_send() callback. To
achieve this, we simply use wmb() instead of smp_wmb() before
calling device ipi_send().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reported-by: Bo Gan <ganboing@gmail.com>
Each APLIC CLRIE register allows disabling 32 interrupt sources at
a time by writing -1 so no need to write CLRIE register separately
for each interrupt source.
Fixes: 99792653de ("lib: utils/irqchip: Add APLIC initialization library")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
total_ctrs is bounded by
SBI_PMU_FW_CTR_MAX + SBI_PMU_HW_CTR_MAX) == 48
which exceeds BITS_PER_LONG on 32 bit systems.
Iterating over the bits of &cmask results in a buffer overflow when looking
for a bit >= BITS_PER_LONG.
Adjust the iterators in sbi_pmu_ctr_start() and sbi_pmu_ctr_stop()
accordingly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_hart_map_saddr() must create PMP mapping of size greater
than or equal to PMP granularity otherwise PMP mapping does not
work when size parameter less than sbi_hart_pmp_granularity(scratch).
Fixes: 6e44ef686a ("lib: sbi: Add functions to map/unmap shared memory")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
For some debuggers that do not implement SYSWRITEC and SYSREADC
operations, we have to use SYSWRITE and SYSREAD.
Instead of implementing semihosting_putc() using SYSWRITE, let us
simply remove semihosting_putc() because console_putc/console_puts
are now interchangeable.
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
console_puts/console_putc should replace each other, but the previous
sbi_putc can only use console_putc. This patch addresses this problem.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
In the future there may be a lot of ISA extensions, a 'long' may not
be able to accommodate, changed to an array for the future.
Addresses-Coverity-ID: 1568357 Out-of-bounds access
Fixes: 6259b2ec2d ("lib: utils/fdt: Fix fdt_parse_isa_extensions()
implementation")
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If ISA extension Zkr is available, set
mseccfg.sseed=1
mseccfg.useed=0
This enables access to the seed CSR in S-mode but not in U-mode.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
- Add Zkr as extension in sbi_hart_extensions enum
- Return "zkr" string for Zkr extension from sbi_hart_extension_id2string
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Define macros to access the sseed and the useed bit in the machine
security configuration register (mseccfg).
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As the domain will reject a new memory region which has a sub-regions
already in the domain, even the new region is bigger and has the same
flags. This problem can be solved by relaxing region restriction and
rechecking when adding and sanitizing domains.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Swapping domain region is a common operation when sorting domain region,
so separate it as a function to make code clean.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The quirks checking will cause ACLINT step into a CLINT code path, this
is not expected when ACLINT needs custom quirks.
Add a new quirk to identify custom ACLINT, and apply the general quirks
after applying CLINT specific quirks.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In the past, we used fdt_reset_thead to help customers with prototype
verification. However, with the emergence of the Big-little SoC system,
it can no longer meet the demand. Therefore, we use zero_stage_boot
instead of fdt_reset_thead. It cleans up the opensbi code and ends the
disputation of reset_sample's dts.
This patch removes the fdt_reset_thead component and updates the related
doc.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
It's wrong to put the fence after setting the boot status flag because
all relocation operations must be finished before setting the status
flag. So, this fence must be put before the setting status flag, and
there is no use in putting a fence between _start_warm and setting
status flag.
Also, nop can't delay other harts too much, so use div instead, just
like Linux cpu_relax. Current opensbi force enables “M” Standard
Extension, and mul instructions have been used in the fw_base.S.
After the above two fixes, the boot hart index param of the
fw_dynamic_info could be guaranteed properly for all platforms.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
For some debuggers that do not implement SYSWRITEC and SYSREADC
operations, we can use SYSWRITE and SYSREAD instead like the
implementation of semihosting_getc().
Signed-off-by: Chen Pei <cp0613@linux.alibaba.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For platform with high number of harts, it is better to auto detect a
suitable number of entries in tlb fifo. Since allocating tlb entry for
all online harts can reduce the wait time significantly, using the
number of the online harts can make most platforms happy. This auto
detection can avoid most duplicate code for setting tlb fifo size.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Flushing the tlb entries can solve the thead tlb problem, but flushing
it by address will miss something and lead to a exception in some rare
cases, and this is more common for sg2042.
To solve this problem, flush the tlb entries by asid in the custom trap
handler to ensure it is refreshed.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Per the SBI specification, the effects of these functions are limited to
a specific ASID and/or VMID. This applies even when flushing the entire
address space.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since all the SoC with thead c9xx cores need this initialization at now,
initialize the c9xx pmu in the thead generic platform by default.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Separate the implement of T-HEAD c9xx errata to allow any platform
with bug related to c9xx cores can use it.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Separate the implement of T-HEAD c9xx pmu to allow any platform with
c9xx cores can use it.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The CSR encoding for t-head c9xx cores is shared across all the
platforms with these cores. So move header thead_c9xx.h to the
thead subdir.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since commit 112daa2e64 ("lib: sbi: Maximize the use of HART index in
sbi_domain") the platform parameter is unused.
Fixes: 112daa2e64 ("lib: sbi: Maximize the use of HART index in sbi_domain")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that SBI v2.0 specification is frozen, we change spec version
implemented by OpenSBI to v2.0.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Unlike C.LWSP/C.LDSP, these encodings can be used with the zero
register, so checking that the rs2 field is non-zero is unnecessary.
Additionally, the previous check was incorrect since it was checking
the immediate field of the instruction instead of the rs2 field.
Signed-off-by: Amanieu d'Antras <amanieu@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
RISC-V privileged specification v1.12 introduced the mconfigptr CSR
which will hold the physical address of a configuration data
structure.
Signed-off-by: Yangjie Zhang <jay1273062855@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
"Zicsr" isa extension has been separated from "I" extension.
This patch add the isa requirement of "Zicsr" extension in
platform requirements documentation.
Signed-off-by: Yangjie Zhang <jay1273062855@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In starfive_gpio_direction_output() readl() is called twice to read the
gpio direction register. The result of the first read is discarded.
Remove the redundant read.
Fixes: 908be1b85c ("gpio/starfive: add gpio driver and support gpio reset")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sbi_pmu_ctr_cfg_match() receives data from a lower privilege level mode.
We must catch maliciously wrong values.
We already check against total_ctrs. But we do not check that total_ctrs is
less than SBI_PMU_HW_CTR_MAX + SBI_PMU_FW_CTR_MAX.
Check that the number of hardware counters is in the valid range.
Addresses-Coverity-ID: 1566114 Out-of-bounds write
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The define is hard to read. The continue statement does not do what was
intended.
* Remove do {} while (false);
* Change the name to set_multi_letter_ext
- Other local macros are lower case too.
- Refer to the fact that this is only used for multi-letter extensions.
Addresses-Coverity-ID: 1568359 Unexpected control flow
Fixes: d72f5f1747 ("lib: utils: Add detection of Smepmp from ISA string in FDT")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
hart_exts == NULL can only occur if offset and node address lead to an
overflow resulting in exactly NULL. As we don't catch other values of
overflow it does not make sense to treat this one as special.
Addresses-Coverity-ID: 1568355 Logically dead code
Addresses-Coverity-ID: 1568358 Logically dead code
Fixes: 6259b2ec2d ("lib: utils/fdt: Fix fdt_parse_isa_extensions() implementation")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
'1' is a 32 bit integer. When shifting it by more than 31 bits it becomes
zero and we get an incorrect return value.
Addresses-Coverity-ID: 1568356 Bad bit shift operation
Fixes: 296e70d69d ("lib: sbi: Extend sbi_hartmask to support both hartid and hartindex")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The added memory region should start from the base address.
Otherwise, the range will be shifted by reg_offset and not
able to merge consecutive NAPOT regions in the root domain,
resulting in wasted PMP entries.
Fixes: e8bc1621 ("lib: utils/serial: Add shared regions for
serial drivers")
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The base of .text is defined by `FW_TEXT_START`, not `FW_TEXT_BASE`.
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since everything is statically linked, we don't need to expose symbols
for dynamic linking.
For a default build this saves about 2 KiB of useless read only data in
.dynsym, .dynstr, .hash, .gnu.hash sections.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since everything is statically linked, we won't actually have
R_RISCV_{32,64} relocations. No need to handle these.
Fixes: 0f20e8adcf ("firmware: Support position independent execution")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The .rela.dyn section should be exactly the size of the relocations,
without padding. On RV64, .rela* sections are already aligned and
there's no need for padding. On RV32, this adds padding up to 4 bytes,
which, if present, confuses the relocation loop into processing an extra
entry past the end of .rela*, and it crashes with an invalid memory
access.
Fixes: 0f20e8adcf ("firmware: Support position independent execution")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
