We will add new functions to sbi_double_trap.c in order to register an
SSE event, split this to a header as part of preparation work.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
While sbi_pmu_irq_bit() was used to delegate irq to S-mode, LCOFIP usage
was still hardcoded in various places. This led to change the returned
value of sbi_pmu_irq_bit() to be a bit number rather than a bit mask
since it returns an 'int' and we need to obtain the bit number itself to
handle it in the IRQs handlers. Add a similar function to return the
irq mask which can also be used where the mask is required rather than
the bit itself.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Add Ssdbltrp trap handler support for S-mode double trap handling. If
the trap is received while in VS-mode, then the trap is redirected to
S-mode. If caught while in HS-mode, then an error is returned to the top
trap handler which will panic.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Previous privilege mode retrieval from mstatus is done at different
places, factorize it rather than copy/pasting it again.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The same pattern is used at multiple places to verify in which mode
the exception was actually taken. Factorize it.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
This patch adds support to check for zicfilp / zicfiss extension.
zicfilp record status of hart's ELP state in *status csr. Missing landing
pad sets MPELP in mstatus. When SBI is redirecting back to S/VS/HS, SPELP
is set in sstatus/vsstatus.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add SSE callbacks registration to PMU driver in order to disable
interrupt delegation for PMU interrupts. When interrupts are
undelegated send the PMU SSE event upon LCOFIP IRQ.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This extension [1] allows to deliver events from SBI to supervisor via
a software mechanism. This extension defines events (either local or
global) which are signaled by the SBI on specific signal sources (IRQ,
exceptions, etc) and are injected to be executed in supervisor mode.
[1] https://lists.riscv.org/g/tech-prs/message/798
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_trap_error() should dump state of all in-flight traps upon
failure in a nested trap so extend it accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
The struct sbi_trap_context already has the information needed by
sbi_illegal_insn_handler() so directly pass struct sbi_trap_context
pointer to this function.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
The struct sbi_trap_context already has the information needed by
misaligned load/store and access fault load/store handlers so directly
pass struct sbi_trap_context pointer to these functions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Club the struct sbi_trap_regs and struct sbi_trap_info a new
struct sbi_trap_context (aka trap context) which must be saved
by low-level trap handler before calling sbi_trap_handler().
To track nested traps, the struct sbi_scratch points to the current
trap context and the trap context has pointer to pervious context
of previous trap.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Over the years, no uses of sbi_trap_exit() have been found so remove
it and also remove related code from fw_base.S and sbi_scratch.h.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
In the only places this value is used, it duplicates mepc from
struct sbi_trap_regs.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch abstracts out the instruction decoding part of misaligned ld/st
fault handlers, so it can be reused by ld/st access fault handlers.
Also Added lb/lbu/sb decoding. (previously unreachable by misaligned fault)
sbi_trap_emulate_load/store is now the common handler which takes a `emu`
parameter that is responsible for emulating the misaligned or access fault.
The `emu` callback is expected to fixup the fault, and based on the return
code of `emu`, sbi_trap_emulate_load/store will:
r/wlen => the fixup is successful and regs/mepc needs to be updated.
0 => the fixup is successful, but regs/mepc should be left untouched
(this is usually used if `emu` does `sbi_trap_redirect`)
-err => failed, sbi_trap_error will be called
For now, load/store access faults are blindly redirected. It will be
enhanced in the following patches.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This simplifies both handlers such that when the handler needs to
redirect the original trap, it's readily available.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sbi_trap_redirect now uses const pointer to `trap`.
This ensures the caller that we never change `trap` in sbi_trap_redirect.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We have redundant semicolon at quite a few places so let's remove it.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
C language standard uses true/false for the boolean type.
Let's switch to that for better language compatibility.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
The GVA bit is in mstatus on RV64, and in mstatush in RV32. Refactor
code handling this in sbi_trap_handler into a helper function to extract
GVA from sbi_trap_regs, so that future code accessing GVA can be
XLEN-agnostic.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_pmu.h should only include minimal required headers whereas
sbi_pmu.c should include all required headers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The privileged spec specifies that on a trap to HS-mode, hstatus.GVA
should be set to 1 if stval is written with a guest virtual address, and
to 0 otherwise. Implement this by setting hstatus.GVA to trap->gva when
redirecting traps to HS-mode.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The hypervisor CSRs hstatus, htval, htinst should always be set if the
trap is to be taken in HS-mode, regardless of which mode it came from.
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In some cases the sbi_trap_info argument passed to sbi_trap_redirect is
created from scratch by filling its fields. Since we previously added a
gva field to struct sbi_trap_info, initialize gva in these cases also.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
HS-mode software can choose what exceptions to delegate to VS-mode using
the hedeleg CSR. Synthetic VS/VU-mode exceptions should also honor
hedeleg. They should be redirected to VS-mode if and only if delegated
by HS-mode.
Signed-off-by: dramforever <dramforever@live.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since past few years, we have been using "hart features" in OpenSBI
to represent all optionalities and multi-letter extensions defined
by the RISC-V specifications.
The RISC-V profiles specification has taken a different approach and
started assigning extension names for all optionalities which did not
have any extension name previously.
(Refer, https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc)
Inspired from the RISC-V profiles specification, we convert OpenSBI
hart features into hart extensions. Going forward, we align the
extension naming with RISC-V profiles specification. Currently, only
"time CSR" and "AIA CSR" have not been assigned extension name but
for everything else we have a name.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Currently, the external interrupt handling is scattered between
sbi_init and sbi_trap. This patch moves all external interrupt
handling into a simple framework called sbi_irqchip.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
This patch adds sbi_trap_set_external_irqfn() API which can be used by
OpenSBI platform code to set a callback function for external interrupts.
The RISC-V AIA IMSIC driver will use this API to implement inter-processor
interrupts on-top-of MSIs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
commit 764a17d852 ("lib: sbi: Implement firmware counters") added
switch cases for CAUSE_LOAD_ACCESS and CAUSE_STORE_ACCESS. This caused
them to stop being redirected to U or S mode, as that is handled in the
default switch case. As a result, an error in userspace could cause the
system to hang. Fix this by allowing the acces fault case to fall
through to the default case.
Fixes: 764a17d852 ("lib: sbi: Implement firmware counters")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
RISC-V SBI v0.3 specification defines a set of firmware events that can
provide additional information about the current firmware context. All
of the firmware event monitoring are enabled now. The firmware
events must be defined as raw perf event with MSB set as specified in the
specification.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
There are two copies of the same abnormal exit code, this patch deletes one
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We introduce sbi_trap_exit() API which can help non-firmware
(i.e. generic or platform) code to force exit trap/interrupt
handling and resume execution at context pointed by parameter
"const struct sbi_trap_regs *regs".
This new sbi_trap_exit() API will help Keystone Enclave project
to resume execution of enclave from custom SBI call handler.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should allow M-mode to M-mode ECALLs because:
1. No other mode can handle M-mode ECALLs
2. In future, we can allow M-mode baremetal application (not
linked to OpenSBI) running independently and cooperatively
without corrupting OpenSBI M-mode state (CSRs and memory).
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We rename CAUSE_HYPERVISOR_ECALL to CAUSE_SUPERVISOR_ECALL and
CAUSE_SUPERVISOR_ECALL to CAUSE_VIRTUAL_SUPERVISOR_ECALL so that
it matches latest RISC-V privilege spec.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The VS-mode ecall is supposed to be handled by HS-mode so
sbi_trap_handler() should fallback to default case for
VS-mode ecall trap.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When redirecting from VS/VU-mode to HS-mode, hstatus.SPVP was set
to the value of mstatus.SPP, as according to the specification both
flags should be set to the same value.
However, the assignment of SPVP takes place before SPP itself is
updated, which results in SPVP having an outdated value.
Signed-off-by: Georg Kotheimer <georg.kotheimer@tu-dresden.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
To support RISC-V hypervisor v0.6.1, we:
1. Don't need to explicitly forward WFI traps from VS/VU-mode
2. Have to delegate virtual instruction trap to HS-mode
3. Have to update trap redirection for changes in HSTATUS CSR
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch simplify sbi_trap_handler() API as follows:
1. Remove current hartid local variable because sbi_trap_handler()
itself does not need it.
2. Remove scratch parameter because none of the functions directly
called by sbi_trap_handler() require it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We remove mcause, scratch and hartid parameters from various
functions for ecall handling because we can always get current
HART id and current scratch pointer using just one CSR access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We remove mcause, scratch and hartid parameters from various functions
for misaligned load/store handling because we can always get current
HART id and current scratch pointer using just one CSR access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We remove mcause, scratch and hartid parameters from various
functions for illegal instruction handling because we can always
get current HART id and current scratch pointer using just one
CSR access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
