FreeRTOS-RISCV/FreeRTOSv10.2.1/FreeRTOS/Source/portable/IAR/RX100/port.c

517 lines
17 KiB
C

/*
* FreeRTOS Kernel V10.2.1
* Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/*-----------------------------------------------------------
* Implementation of functions defined in portable.h for the SH2A port.
*----------------------------------------------------------*/
/* Standard C includes. */
#include "limits.h"
/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
/* Library includes. */
#include "string.h"
/* Hardware specifics. */
#include "machine.h"
/*-----------------------------------------------------------*/
/* Tasks should start with interrupts enabled and in Supervisor mode, therefore
PSW is set with U and I set, and PM and IPL clear. */
#define portINITIAL_PSW ( ( StackType_t ) 0x00030000 )
/* The peripheral clock is divided by this value before being supplying the
CMT. */
#if ( configUSE_TICKLESS_IDLE == 0 )
/* If tickless idle is not used then the divisor can be fixed. */
#define portCLOCK_DIVISOR 8UL
#elif ( configPERIPHERAL_CLOCK_HZ >= 12000000 )
#define portCLOCK_DIVISOR 512UL
#elif ( configPERIPHERAL_CLOCK_HZ >= 6000000 )
#define portCLOCK_DIVISOR 128UL
#elif ( configPERIPHERAL_CLOCK_HZ >= 1000000 )
#define portCLOCK_DIVISOR 32UL
#else
#define portCLOCK_DIVISOR 8UL
#endif
/* Keys required to lock and unlock access to certain system registers
respectively. */
#define portUNLOCK_KEY 0xA50B
#define portLOCK_KEY 0xA500
/*-----------------------------------------------------------*/
/*
* Function to start the first task executing - written in asm code as direct
* access to registers is required.
*/
extern void prvStartFirstTask( void );
/*
* The tick ISR handler. The peripheral used is configured by the application
* via a hook/callback function.
*/
__interrupt static void prvTickISR( void );
/*
* Sets up the periodic ISR used for the RTOS tick using the CMT.
* The application writer can define configSETUP_TICK_INTERRUPT() (in
* FreeRTOSConfig.h) such that their own tick interrupt configuration is used
* in place of prvSetupTimerInterrupt().
*/
static void prvSetupTimerInterrupt( void );
#ifndef configSETUP_TICK_INTERRUPT
/* The user has not provided their own tick interrupt configuration so use
the definition in this file (which uses the interval timer). */
#define configSETUP_TICK_INTERRUPT() prvSetupTimerInterrupt()
#endif /* configSETUP_TICK_INTERRUPT */
/*
* Called after the sleep mode registers have been configured, prvSleep()
* executes the pre and post sleep macros, and actually calls the wait
* instruction.
*/
#if configUSE_TICKLESS_IDLE == 1
static void prvSleep( TickType_t xExpectedIdleTime );
#endif /* configUSE_TICKLESS_IDLE */
/*-----------------------------------------------------------*/
extern void *pxCurrentTCB;
/*-----------------------------------------------------------*/
/* Calculate how many clock increments make up a single tick period. */
static const uint32_t ulMatchValueForOneTick = ( ( configPERIPHERAL_CLOCK_HZ / portCLOCK_DIVISOR ) / configTICK_RATE_HZ );
#if configUSE_TICKLESS_IDLE == 1
/* Holds the maximum number of ticks that can be suppressed - which is
basically how far into the future an interrupt can be generated. Set
during initialisation. This is the maximum possible value that the
compare match register can hold divided by ulMatchValueForOneTick. */
static const TickType_t xMaximumPossibleSuppressedTicks = USHRT_MAX / ( ( configPERIPHERAL_CLOCK_HZ / portCLOCK_DIVISOR ) / configTICK_RATE_HZ );
/* Flag set from the tick interrupt to allow the sleep processing to know if
sleep mode was exited because of a tick interrupt, or an interrupt
generated by something else. */
static volatile uint32_t ulTickFlag = pdFALSE;
/* The CMT counter is stopped temporarily each time it is re-programmed.
The following constant offsets the CMT counter match value by the number of
CMT counts that would typically be missed while the counter was stopped to
compensate for the lost time. The large difference between the divided CMT
clock and the CPU clock means it is likely ulStoppedTimerCompensation will
equal zero - and be optimised away. */
static const uint32_t ulStoppedTimerCompensation = 100UL / ( configCPU_CLOCK_HZ / ( configPERIPHERAL_CLOCK_HZ / portCLOCK_DIVISOR ) );
#endif
/*-----------------------------------------------------------*/
/*
* See header file for description.
*/
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
/* Offset to end up on 8 byte boundary. */
pxTopOfStack--;
/* R0 is not included as it is the stack pointer. */
*pxTopOfStack = 0x00;
pxTopOfStack--;
*pxTopOfStack = 0x00;
pxTopOfStack--;
*pxTopOfStack = portINITIAL_PSW;
pxTopOfStack--;
*pxTopOfStack = ( StackType_t ) pxCode;
/* When debugging it can be useful if every register is set to a known
value. Otherwise code space can be saved by just setting the registers
that need to be set. */
#ifdef USE_FULL_REGISTER_INITIALISATION
{
pxTopOfStack--;
*pxTopOfStack = 0x12345678; /* r15. */
pxTopOfStack--;
*pxTopOfStack = 0xaaaabbbb;
pxTopOfStack--;
*pxTopOfStack = 0xdddddddd;
pxTopOfStack--;
*pxTopOfStack = 0xcccccccc;
pxTopOfStack--;
*pxTopOfStack = 0xbbbbbbbb;
pxTopOfStack--;
*pxTopOfStack = 0xaaaaaaaa;
pxTopOfStack--;
*pxTopOfStack = 0x99999999;
pxTopOfStack--;
*pxTopOfStack = 0x88888888;
pxTopOfStack--;
*pxTopOfStack = 0x77777777;
pxTopOfStack--;
*pxTopOfStack = 0x66666666;
pxTopOfStack--;
*pxTopOfStack = 0x55555555;
pxTopOfStack--;
*pxTopOfStack = 0x44444444;
pxTopOfStack--;
*pxTopOfStack = 0x33333333;
pxTopOfStack--;
*pxTopOfStack = 0x22222222;
pxTopOfStack--;
}
#else
{
/* Leave space for the registers that will get popped from the stack
when the task first starts executing. */
pxTopOfStack -= 15;
}
#endif
*pxTopOfStack = ( StackType_t ) pvParameters; /* R1 */
pxTopOfStack--;
*pxTopOfStack = 0x12345678; /* Accumulator. */
pxTopOfStack--;
*pxTopOfStack = 0x87654321; /* Accumulator. */
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* Use pxCurrentTCB just so it does not get optimised away. */
if( pxCurrentTCB != NULL )
{
/* Call an application function to set up the timer that will generate
the tick interrupt. This way the application can decide which
peripheral to use. If tickless mode is used then the default
implementation defined in this file (which uses CMT0) should not be
overridden. */
configSETUP_TICK_INTERRUPT();
/* Enable the software interrupt. */
_IEN( _ICU_SWINT ) = 1;
/* Ensure the software interrupt is clear. */
_IR( _ICU_SWINT ) = 0;
/* Ensure the software interrupt is set to the kernel priority. */
_IPR( _ICU_SWINT ) = configKERNEL_INTERRUPT_PRIORITY;
/* Start the first task. */
prvStartFirstTask();
}
/* Execution should not reach here as the tasks are now running!
prvSetupTimerInterrupt() is called here to prevent the compiler outputting
a warning about a statically declared function not being referenced in the
case that the application writer has provided their own tick interrupt
configuration routine (and defined configSETUP_TICK_INTERRUPT() such that
their own routine will be called in place of prvSetupTimerInterrupt()). */
prvSetupTimerInterrupt();
/* Should not get here. */
return pdFAIL;
}
/*-----------------------------------------------------------*/
#pragma vector = configTICK_VECTOR
__interrupt static void prvTickISR( void )
{
/* Re-enable interrupts. */
__enable_interrupt();
/* Increment the tick, and perform any processing the new tick value
necessitates. */
__set_interrupt_level( configMAX_SYSCALL_INTERRUPT_PRIORITY );
{
if( xTaskIncrementTick() != pdFALSE )
{
taskYIELD();
}
}
__set_interrupt_level( configKERNEL_INTERRUPT_PRIORITY );
#if configUSE_TICKLESS_IDLE == 1
{
/* The CPU woke because of a tick. */
ulTickFlag = pdTRUE;
/* If this is the first tick since exiting tickless mode then the CMT
compare match value needs resetting. */
CMT0.CMCOR = ( uint16_t ) ulMatchValueForOneTick;
}
#endif
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* Not implemented in ports where there is nothing to return to.
Artificially force an assert. */
configASSERT( pxCurrentTCB == NULL );
}
/*-----------------------------------------------------------*/
static void prvSetupTimerInterrupt( void )
{
/* Unlock. */
SYSTEM.PRCR.WORD = portUNLOCK_KEY;
/* Enable CMT0. */
MSTP( CMT0 ) = 0;
/* Lock again. */
SYSTEM.PRCR.WORD = portLOCK_KEY;
/* Interrupt on compare match. */
CMT0.CMCR.BIT.CMIE = 1;
/* Set the compare match value. */
CMT0.CMCOR = ( uint16_t ) ulMatchValueForOneTick;
/* Divide the PCLK. */
#if portCLOCK_DIVISOR == 512
{
CMT0.CMCR.BIT.CKS = 3;
}
#elif portCLOCK_DIVISOR == 128
{
CMT0.CMCR.BIT.CKS = 2;
}
#elif portCLOCK_DIVISOR == 32
{
CMT0.CMCR.BIT.CKS = 1;
}
#elif portCLOCK_DIVISOR == 8
{
CMT0.CMCR.BIT.CKS = 0;
}
#else
{
#error Invalid portCLOCK_DIVISOR setting
}
#endif
/* Enable the interrupt... */
_IEN( _CMT0_CMI0 ) = 1;
/* ...and set its priority to the application defined kernel priority. */
_IPR( _CMT0_CMI0 ) = configKERNEL_INTERRUPT_PRIORITY;
/* Start the timer. */
CMT.CMSTR0.BIT.STR0 = 1;
}
/*-----------------------------------------------------------*/
#if configUSE_TICKLESS_IDLE == 1
static void prvSleep( TickType_t xExpectedIdleTime )
{
/* Allow the application to define some pre-sleep processing. */
configPRE_SLEEP_PROCESSING( xExpectedIdleTime );
/* xExpectedIdleTime being set to 0 by configPRE_SLEEP_PROCESSING()
means the application defined code has already executed the WAIT
instruction. */
if( xExpectedIdleTime > 0 )
{
__wait_for_interrupt();
}
/* Allow the application to define some post sleep processing. */
configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
}
#endif /* configUSE_TICKLESS_IDLE */
/*-----------------------------------------------------------*/
#if configUSE_TICKLESS_IDLE == 1
void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
{
uint32_t ulMatchValue, ulCompleteTickPeriods, ulCurrentCount;
eSleepModeStatus eSleepAction;
/* THIS FUNCTION IS CALLED WITH THE SCHEDULER SUSPENDED. */
/* Make sure the CMT reload value does not overflow the counter. */
if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
{
xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
}
/* Calculate the reload value required to wait xExpectedIdleTime tick
periods. */
ulMatchValue = ulMatchValueForOneTick * xExpectedIdleTime;
if( ulMatchValue > ulStoppedTimerCompensation )
{
/* Compensate for the fact that the CMT is going to be stopped
momentarily. */
ulMatchValue -= ulStoppedTimerCompensation;
}
/* Stop the CMT momentarily. The time the CMT is stopped for is
accounted for as best it can be, but using the tickless mode will
inevitably result in some tiny drift of the time maintained by the
kernel with respect to calendar time. */
CMT.CMSTR0.BIT.STR0 = 0;
while( CMT.CMSTR0.BIT.STR0 == 1 )
{
/* Nothing to do here. */
}
/* Critical section using the global interrupt bit as the i bit is
automatically reset by the WAIT instruction. */
__disable_interrupt();
/* The tick flag is set to false before sleeping. If it is true when
sleep mode is exited then sleep mode was probably exited because the
tick was suppressed for the entire xExpectedIdleTime period. */
ulTickFlag = pdFALSE;
/* If a context switch is pending then abandon the low power entry as
the context switch might have been pended by an external interrupt that
requires processing. */
eSleepAction = eTaskConfirmSleepModeStatus();
if( eSleepAction == eAbortSleep )
{
/* Restart tick. */
CMT.CMSTR0.BIT.STR0 = 1;
__enable_interrupt();
}
else if( eSleepAction == eNoTasksWaitingTimeout )
{
/* Protection off. */
SYSTEM.PRCR.WORD = portUNLOCK_KEY;
/* Ready for software standby with all clocks stopped. */
SYSTEM.SBYCR.BIT.SSBY = 1;
/* Protection on. */
SYSTEM.PRCR.WORD = portLOCK_KEY;
/* Sleep until something happens. Calling prvSleep() will
automatically reset the i bit in the PSW. */
prvSleep( xExpectedIdleTime );
/* Restart the CMT. */
CMT.CMSTR0.BIT.STR0 = 1;
}
else
{
/* Protection off. */
SYSTEM.PRCR.WORD = portUNLOCK_KEY;
/* Ready for deep sleep mode. */
SYSTEM.MSTPCRC.BIT.DSLPE = 1;
SYSTEM.MSTPCRA.BIT.MSTPA28 = 1;
SYSTEM.SBYCR.BIT.SSBY = 0;
/* Protection on. */
SYSTEM.PRCR.WORD = portLOCK_KEY;
/* Adjust the match value to take into account that the current
time slice is already partially complete. */
ulMatchValue -= ( uint32_t ) CMT0.CMCNT;
CMT0.CMCOR = ( uint16_t ) ulMatchValue;
/* Restart the CMT to count up to the new match value. */
CMT0.CMCNT = 0;
CMT.CMSTR0.BIT.STR0 = 1;
/* Sleep until something happens. Calling prvSleep() will
automatically reset the i bit in the PSW. */
prvSleep( xExpectedIdleTime );
/* Stop CMT. Again, the time the SysTick is stopped for is
accounted for as best it can be, but using the tickless mode will
inevitably result in some tiny drift of the time maintained by the
kernel with respect to calendar time. */
CMT.CMSTR0.BIT.STR0 = 0;
while( CMT.CMSTR0.BIT.STR0 == 1 )
{
/* Nothing to do here. */
}
ulCurrentCount = ( uint32_t ) CMT0.CMCNT;
if( ulTickFlag != pdFALSE )
{
/* The tick interrupt has already executed, although because
this function is called with the scheduler suspended the actual
tick processing will not occur until after this function has
exited. Reset the match value with whatever remains of this
tick period. */
ulMatchValue = ulMatchValueForOneTick - ulCurrentCount;
CMT0.CMCOR = ( uint16_t ) ulMatchValue;
/* The tick interrupt handler will already have pended the tick
processing in the kernel. As the pending tick will be
processed as soon as this function exits, the tick value
maintained by the tick is stepped forward by one less than the
time spent sleeping. The actual stepping of the tick appears
later in this function. */
ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
}
else
{
/* Something other than the tick interrupt ended the sleep.
How many complete tick periods passed while the processor was
sleeping? */
ulCompleteTickPeriods = ulCurrentCount / ulMatchValueForOneTick;
/* The match value is set to whatever fraction of a single tick
period remains. */
ulMatchValue = ulCurrentCount - ( ulCompleteTickPeriods * ulMatchValueForOneTick );
CMT0.CMCOR = ( uint16_t ) ulMatchValue;
}
/* Restart the CMT so it runs up to the match value. The match value
will get set to the value required to generate exactly one tick period
the next time the CMT interrupt executes. */
CMT0.CMCNT = 0;
CMT.CMSTR0.BIT.STR0 = 1;
/* Wind the tick forward by the number of tick periods that the CPU
remained in a low power state. */
vTaskStepTick( ulCompleteTickPeriods );
}
}
#endif /* configUSE_TICKLESS_IDLE */