Firmware/FreeRTOS-RISCV
8
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Initial version

Browse Source
This commit is contained in:
Eyck Jentzsch
2019-06-28 23:08:36 +02:00
commit 4d8973e20b
2426 changed files with 948029 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

118
FreeRTOSv10.2.1/FreeRTOS-Plus/Source/FreeRTOS-Plus-TCP/portable/NetworkInterface/include/phyHandling.h Normal file
View File

@ -0,0 +1,118 @@
/*
* Handling of Ethernet PHY's
* PHY's communicate with an EMAC either through
* a Media-Independent Interface (MII), or a Reduced Media-Independent Interface (RMII).
* The EMAC can poll for PHY ports on 32 different addresses. Each of the PHY ports
* shall be treated independently.
*
*/
#ifndef PHYHANDLING_H
#define PHYHANDLING_H
#ifdef __cplusplus
extern "C" {
#endif
#ifndef ipconfigPHY_MAX_PORTS
/* There can be at most 32 PHY ports, but in most cases there are 4 or less. */
#define ipconfigPHY_MAX_PORTS 4
#endif
/* A generic user-provided function that reads from the PHY-port at 'xAddress'( 0-based ). A 16-bit value shall be stored in
'*pusValue'. xRegister is the register number ( 0 .. 31 ). In fact all PHY registers are 16-bit.
Return non-zero in case the action failed. */
typedef BaseType_t ( *xApplicationPhyReadHook_t )( BaseType_t xAddress, BaseType_t xRegister, uint32_t *pulValue );
/* A generic user-provided function that writes 'usValue' to the
PHY-port at 'xAddress' ( 0-based ). xRegister is the register number ( 0 .. 31 ).
Return non-zero in case the action failed. */
typedef BaseType_t ( *xApplicationPhyWriteHook_t )( BaseType_t xAddress, BaseType_t xRegister, uint32_t ulValue );
typedef struct xPhyProperties
{
uint8_t ucSpeed;
uint8_t ucMDI_X; /* MDI-X : Medium Dependent Interface - Crossover */
uint8_t ucDuplex;
uint8_t ucSpare;
} PhyProperties_t;
typedef struct xEthernetPhy
{
xApplicationPhyReadHook_t fnPhyRead;
xApplicationPhyWriteHook_t fnPhyWrite;
uint32_t ulPhyIDs[ ipconfigPHY_MAX_PORTS ];
uint8_t ucPhyIndexes[ ipconfigPHY_MAX_PORTS ];
TimeOut_t xLinkStatusTimer;
TickType_t xLinkStatusRemaining;
BaseType_t xPortCount;
uint32_t ulBCRValue;
uint32_t ulACRValue;
uint32_t ulLinkStatusMask;
PhyProperties_t xPhyPreferences;
PhyProperties_t xPhyProperties;
} EthernetPhy_t;
/* Some defines used internally here to indicate preferences about speed, MDIX
(wired direct or crossed), and duplex (half or full). */
/* Values for PhyProperties_t::ucSpeed : */
#define PHY_SPEED_10 1
#define PHY_SPEED_100 2
#define PHY_SPEED_AUTO 3
/* Values for PhyProperties_t::ucMDI_X : */
#define PHY_MDIX_DIRECT 1
#define PHY_MDIX_CROSSED 2
#define PHY_MDIX_AUTO 3
/* Values for PhyProperties_t::ucDuplex : */
#define PHY_DUPLEX_HALF 1
#define PHY_DUPLEX_FULL 2
#define PHY_DUPLEX_AUTO 3
/* ID's of supported PHY's : */
#define PHY_ID_LAN8742A 0x0007c130
#define PHY_ID_LAN8720 0x0007c0f0
#define PHY_ID_KSZ8041 0x000010A1
#define PHY_ID_KSZ8051 0x000010A1
#define PHY_ID_KSZ8081 0x000010A1
#define PHY_ID_KSZ8863 0x00221430
#define PHY_ID_DP83848I 0x20005C90
/* Initialise the struct and assign a PHY-read and -write function. */
void vPhyInitialise( EthernetPhy_t *pxPhyObject, xApplicationPhyReadHook_t fnPhyRead, xApplicationPhyWriteHook_t fnPhyWrite );
/* Discover all PHY's connected by polling 32 indexes ( zero-based ) */
BaseType_t xPhyDiscover( EthernetPhy_t *pxPhyObject );
/* Send a reset commando to the connected PHY ports and send configuration. */
BaseType_t xPhyConfigure( EthernetPhy_t *pxPhyObject, const PhyProperties_t *pxPhyProperties );
/* Give a commando to start auto negotiation on a set of PHY port's. */
BaseType_t xPhyStartAutoNegotiation( EthernetPhy_t *pxPhyObject, uint32_t ulPhyMask );
/* Do not use auto negotiation but use predefined values from 'pxPhyObject->xPhyPreferences'. */
BaseType_t xPhyFixedValue( EthernetPhy_t *pxPhyObject, uint32_t ulPhyMask );
/* Check the current Link Status.
'xHadReception' : make this true if a packet has been received since the
last call to this function. */
BaseType_t xPhyCheckLinkStatus( EthernetPhy_t *pxPhyObject, BaseType_t xHadReception );
static __inline uint32_t xPhyGetMask( EthernetPhy_t *pxPhyObject )
{
return ( ( ( uint32_t ) 1u ) << pxPhyObject-> xPortCount ) - 1;
}
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif