Firmware/FreeRTOS-RISCV
8
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Initial version

Browse Source
This commit is contained in:
Eyck Jentzsch
2019-06-28 23:08:36 +02:00
commit 4d8973e20b
2426 changed files with 948029 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

297
FreeRTOSv10.2.1/FreeRTOS/Source/portable/GCC/AVR32_UC3/exception.S Normal file
View File

@ -0,0 +1,297 @@
/*This file is prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
*
* \brief Exception and interrupt vectors.
*
* This file maps all events supported by an AVR32UC.
*
* - Compiler: GNU GCC for AVR32
* - Supported devices: All AVR32UC devices with an INTC module can be used.
* - AppNote:
*
* \author Atmel Corporation: http://www.atmel.com \n
* Support and FAQ: http://support.atmel.no/
*
******************************************************************************/
/* Copyright (c) 2007, Atmel Corporation All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of ATMEL may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND
* SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <avr32/io.h>
#include "intc.h"
//! @{
//! \verbatim
.section .exception, "ax", @progbits
// Start of Exception Vector Table.
// EVBA must be aligned with a power of two strictly greater than the EVBA-
// relative offset of the last vector.
.balign 0x200
// Export symbol.
.global _evba
.type _evba, @function
_evba:
.org 0x000
// Unrecoverable Exception.
_handle_Unrecoverable_Exception:
rjmp $
.org 0x004
// TLB Multiple Hit: UNUSED IN AVR32UC.
_handle_TLB_Multiple_Hit:
rjmp $
.org 0x008
// Bus Error Data Fetch.
_handle_Bus_Error_Data_Fetch:
rjmp $
.org 0x00C
// Bus Error Instruction Fetch.
_handle_Bus_Error_Instruction_Fetch:
rjmp $
.org 0x010
// NMI.
_handle_NMI:
rjmp $
.org 0x014
// Instruction Address.
_handle_Instruction_Address:
rjmp $
.org 0x018
// ITLB Protection.
_handle_ITLB_Protection:
rjmp $
.org 0x01C
// Breakpoint.
_handle_Breakpoint:
rjmp $
.org 0x020
// Illegal Opcode.
_handle_Illegal_Opcode:
rjmp $
.org 0x024
// Unimplemented Instruction.
_handle_Unimplemented_Instruction:
rjmp $
.org 0x028
// Privilege Violation.
_handle_Privilege_Violation:
rjmp $
.org 0x02C
// Floating-Point: UNUSED IN AVR32UC.
_handle_Floating_Point:
rjmp $
.org 0x030
// Coprocessor Absent: UNUSED IN AVR32UC.
_handle_Coprocessor_Absent:
rjmp $
.org 0x034
// Data Address (Read).
_handle_Data_Address_Read:
rjmp $
.org 0x038
// Data Address (Write).
_handle_Data_Address_Write:
rjmp $
.org 0x03C
// DTLB Protection (Read).
_handle_DTLB_Protection_Read:
rjmp $
.org 0x040
// DTLB Protection (Write).
_handle_DTLB_Protection_Write:
rjmp $
.org 0x044
// DTLB Modified: UNUSED IN AVR32UC.
_handle_DTLB_Modified:
rjmp $
.org 0x050
// ITLB Miss: UNUSED IN AVR32UC.
_handle_ITLB_Miss:
rjmp $
.org 0x060
// DTLB Miss (Read): UNUSED IN AVR32UC.
_handle_DTLB_Miss_Read:
rjmp $
.org 0x070
// DTLB Miss (Write): UNUSED IN AVR32UC.
_handle_DTLB_Miss_Write:
rjmp $
.org 0x100
// Supervisor Call.
_handle_Supervisor_Call:
lda.w pc, SCALLYield
// Interrupt support.
// The interrupt controller must provide the offset address relative to EVBA.
// Important note:
// All interrupts call a C function named _get_interrupt_handler.
// This function will read group and interrupt line number to then return in
// R12 a pointer to a user-provided interrupt handler.
.balign 4
_int0:
// R8-R12, LR, PC and SR are automatically pushed onto the system stack by the
// CPU upon interrupt entry.
#if 1 // B1832: interrupt stack changed to exception stack if exception is detected.
mfsr r12, AVR32_SR
bfextu r12, r12, AVR32_SR_M0_OFFSET, AVR32_SR_M0_SIZE + AVR32_SR_M1_SIZE + AVR32_SR_M2_SIZE
cp.w r12, 0b110
brlo _int0_normal
lddsp r12, sp[0 * 4]
stdsp sp[6 * 4], r12
lddsp r12, sp[1 * 4]
stdsp sp[7 * 4], r12
lddsp r12, sp[3 * 4]
sub sp, -6 * 4
rete
_int0_normal:
#endif
mov r12, 0 // Pass the int_lev parameter to the _get_interrupt_handler function.
call _get_interrupt_handler
cp.w r12, 0 // Get the pointer to the interrupt handler returned by the function.
movne pc, r12 // If this was not a spurious interrupt (R12 != NULL), jump to the handler.
rete // If this was a spurious interrupt (R12 == NULL), return from event handler.
_int1:
// R8-R12, LR, PC and SR are automatically pushed onto the system stack by the
// CPU upon interrupt entry.
#if 1 // B1832: interrupt stack changed to exception stack if exception is detected.
mfsr r12, AVR32_SR
bfextu r12, r12, AVR32_SR_M0_OFFSET, AVR32_SR_M0_SIZE + AVR32_SR_M1_SIZE + AVR32_SR_M2_SIZE
cp.w r12, 0b110
brlo _int1_normal
lddsp r12, sp[0 * 4]
stdsp sp[6 * 4], r12
lddsp r12, sp[1 * 4]
stdsp sp[7 * 4], r12
lddsp r12, sp[3 * 4]
sub sp, -6 * 4
rete
_int1_normal:
#endif
mov r12, 1 // Pass the int_lev parameter to the _get_interrupt_handler function.
call _get_interrupt_handler
cp.w r12, 0 // Get the pointer to the interrupt handler returned by the function.
movne pc, r12 // If this was not a spurious interrupt (R12 != NULL), jump to the handler.
rete // If this was a spurious interrupt (R12 == NULL), return from event handler.
_int2:
// R8-R12, LR, PC and SR are automatically pushed onto the system stack by the
// CPU upon interrupt entry.
#if 1 // B1832: interrupt stack changed to exception stack if exception is detected.
mfsr r12, AVR32_SR
bfextu r12, r12, AVR32_SR_M0_OFFSET, AVR32_SR_M0_SIZE + AVR32_SR_M1_SIZE + AVR32_SR_M2_SIZE
cp.w r12, 0b110
brlo _int2_normal
lddsp r12, sp[0 * 4]
stdsp sp[6 * 4], r12
lddsp r12, sp[1 * 4]
stdsp sp[7 * 4], r12
lddsp r12, sp[3 * 4]
sub sp, -6 * 4
rete
_int2_normal:
#endif
mov r12, 2 // Pass the int_lev parameter to the _get_interrupt_handler function.
call _get_interrupt_handler
cp.w r12, 0 // Get the pointer to the interrupt handler returned by the function.
movne pc, r12 // If this was not a spurious interrupt (R12 != NULL), jump to the handler.
rete // If this was a spurious interrupt (R12 == NULL), return from event handler.
_int3:
// R8-R12, LR, PC and SR are automatically pushed onto the system stack by the
// CPU upon interrupt entry.
#if 1 // B1832: interrupt stack changed to exception stack if exception is detected.
mfsr r12, AVR32_SR
bfextu r12, r12, AVR32_SR_M0_OFFSET, AVR32_SR_M0_SIZE + AVR32_SR_M1_SIZE + AVR32_SR_M2_SIZE
cp.w r12, 0b110
brlo _int3_normal
lddsp r12, sp[0 * 4]
stdsp sp[6 * 4], r12
lddsp r12, sp[1 * 4]
stdsp sp[7 * 4], r12
lddsp r12, sp[3 * 4]
sub sp, -6 * 4
rete
_int3_normal:
#endif
mov r12, 3 // Pass the int_lev parameter to the _get_interrupt_handler function.
call _get_interrupt_handler
cp.w r12, 0 // Get the pointer to the interrupt handler returned by the function.
movne pc, r12 // If this was not a spurious interrupt (R12 != NULL), jump to the handler.
rete // If this was a spurious interrupt (R12 == NULL), return from event handler.
// Constant data area.
.balign 4
// Values to store in the interrupt priority registers for the various interrupt priority levels.
// The interrupt priority registers contain the interrupt priority level and
// the EVBA-relative interrupt vector offset.
.global ipr_val
.type ipr_val, @object
ipr_val:
.word (INT0 << AVR32_INTC_IPR0_INTLEV_OFFSET) | (_int0 - _evba),\
(INT1 << AVR32_INTC_IPR0_INTLEV_OFFSET) | (_int1 - _evba),\
(INT2 << AVR32_INTC_IPR0_INTLEV_OFFSET) | (_int2 - _evba),\
(INT3 << AVR32_INTC_IPR0_INTLEV_OFFSET) | (_int3 - _evba)
//! \endverbatim
//! @}

435
FreeRTOSv10.2.1/FreeRTOS/Source/portable/GCC/AVR32_UC3/port.c Normal file
View File

@ -0,0 +1,435 @@
/*This file has been prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
*
* \brief FreeRTOS port source for AVR32 UC3.
*
* - Compiler: GNU GCC for AVR32
* - Supported devices: All AVR32 devices can be used.
* - AppNote:
*
* \author Atmel Corporation: http://www.atmel.com \n
* Support and FAQ: http://support.atmel.no/
*
*****************************************************************************/
/*
* FreeRTOS Kernel V10.2.1
* Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
/* Standard includes. */
#include <sys/cpu.h>
#include <sys/usart.h>
#include <malloc.h>
/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"
/* AVR32 UC3 includes. */
#include <avr32/io.h>
#include "gpio.h"
#if( configTICK_USE_TC==1 )
#include "tc.h"
#endif
/* Constants required to setup the task context. */
#define portINITIAL_SR ( ( StackType_t ) 0x00400000 ) /* AVR32 : [M2:M0]=001 I1M=0 I0M=0, GM=0 */
#define portINSTRUCTION_SIZE ( ( StackType_t ) 0 )
/* Each task maintains its own critical nesting variable. */
#define portNO_CRITICAL_NESTING ( ( uint32_t ) 0 )
volatile uint32_t ulCriticalNesting = 9999UL;
#if( configTICK_USE_TC==0 )
static void prvScheduleNextTick( void );
#else
static void prvClearTcInt( void );
#endif
/* Setup the timer to generate the tick interrupts. */
static void prvSetupTimerInterrupt( void );
/*-----------------------------------------------------------*/
/*
* Low-level initialization routine called during startup, before the main
* function.
* This version comes in replacement to the default one provided by Newlib.
* Newlib's _init_startup only calls init_exceptions, but Newlib's exception
* vectors are not compatible with the SCALL management in the current FreeRTOS
* port. More low-level initializations are besides added here.
*/
void _init_startup(void)
{
/* Import the Exception Vector Base Address. */
extern void _evba;
#if configHEAP_INIT
extern void __heap_start__;
extern void __heap_end__;
BaseType_t *pxMem;
#endif
/* Load the Exception Vector Base Address in the corresponding system register. */
Set_system_register( AVR32_EVBA, ( int ) &_evba );
/* Enable exceptions. */
ENABLE_ALL_EXCEPTIONS();
/* Initialize interrupt handling. */
INTC_init_interrupts();
#if configHEAP_INIT
/* Initialize the heap used by malloc. */
for( pxMem = &__heap_start__; pxMem < ( BaseType_t * )&__heap_end__; )
{
*pxMem++ = 0xA5A5A5A5;
}
#endif
/* Give the used CPU clock frequency to Newlib, so it can work properly. */
set_cpu_hz( configCPU_CLOCK_HZ );
/* Code section present if and only if the debug trace is activated. */
#if configDBG
{
static const gpio_map_t DBG_USART_GPIO_MAP =
{
{ configDBG_USART_RX_PIN, configDBG_USART_RX_FUNCTION },
{ configDBG_USART_TX_PIN, configDBG_USART_TX_FUNCTION }
};
/* Initialize the USART used for the debug trace with the configured parameters. */
set_usart_base( ( void * ) configDBG_USART );
gpio_enable_module( DBG_USART_GPIO_MAP,
sizeof( DBG_USART_GPIO_MAP ) / sizeof( DBG_USART_GPIO_MAP[0] ) );
usart_init( configDBG_USART_BAUDRATE );
}
#endif
}
/*-----------------------------------------------------------*/
/*
* malloc, realloc and free are meant to be called through respectively
* pvPortMalloc, pvPortRealloc and vPortFree.
* The latter functions call the former ones from within sections where tasks
* are suspended, so the latter functions are task-safe. __malloc_lock and
* __malloc_unlock use the same mechanism to also keep the former functions
* task-safe as they may be called directly from Newlib's functions.
* However, all these functions are interrupt-unsafe and SHALL THEREFORE NOT BE
* CALLED FROM WITHIN AN INTERRUPT, because __malloc_lock and __malloc_unlock do
* not call portENTER_CRITICAL and portEXIT_CRITICAL in order not to disable
* interrupts during memory allocation management as this may be a very time-
* consuming process.
*/
/*
* Lock routine called by Newlib on malloc / realloc / free entry to guarantee a
* safe section as memory allocation management uses global data.
* See the aforementioned details.
*/
void __malloc_lock(struct _reent *ptr)
{
vTaskSuspendAll();
}
/*
* Unlock routine called by Newlib on malloc / realloc / free exit to guarantee
* a safe section as memory allocation management uses global data.
* See the aforementioned details.
*/
void __malloc_unlock(struct _reent *ptr)
{
xTaskResumeAll();
}
/*-----------------------------------------------------------*/
/* Added as there is no such function in FreeRTOS. */
void *pvPortRealloc( void *pv, size_t xWantedSize )
{
void *pvReturn;
vTaskSuspendAll();
{
pvReturn = realloc( pv, xWantedSize );
}
xTaskResumeAll();
return pvReturn;
}
/*-----------------------------------------------------------*/
/* The cooperative scheduler requires a normal IRQ service routine to
simply increment the system tick. */
/* The preemptive scheduler is defined as "naked" as the full context is saved
on entry as part of the context switch. */
__attribute__((__naked__)) static void vTick( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT_OS_INT();
#if( configTICK_USE_TC==1 )
/* Clear the interrupt flag. */
prvClearTcInt();
#else
/* Schedule the COUNT&COMPARE match interrupt in (configCPU_CLOCK_HZ/configTICK_RATE_HZ)
clock cycles from now. */
prvScheduleNextTick();
#endif
/* Because FreeRTOS is not supposed to run with nested interrupts, put all OS
calls in a critical section . */
portENTER_CRITICAL();
xTaskIncrementTick();
portEXIT_CRITICAL();
/* Restore the context of the "elected task". */
portRESTORE_CONTEXT_OS_INT();
}
/*-----------------------------------------------------------*/
__attribute__((__naked__)) void SCALLYield( void )
{
/* Save the context of the interrupted task. */
portSAVE_CONTEXT_SCALL();
vTaskSwitchContext();
portRESTORE_CONTEXT_SCALL();
}
/*-----------------------------------------------------------*/
/* The code generated by the GCC compiler uses the stack in different ways at
different optimisation levels. The interrupt flags can therefore not always
be saved to the stack. Instead the critical section nesting level is stored
in a variable, which is then saved as part of the stack context. */
__attribute__((__noinline__)) void vPortEnterCritical( void )
{
/* Disable interrupts */
portDISABLE_INTERRUPTS();
/* Now interrupts are disabled ulCriticalNesting can be accessed
directly. Increment ulCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
}
/*-----------------------------------------------------------*/
__attribute__((__noinline__)) void vPortExitCritical( void )
{
if(ulCriticalNesting > portNO_CRITICAL_NESTING)
{
ulCriticalNesting--;
if( ulCriticalNesting == portNO_CRITICAL_NESTING )
{
/* Enable all interrupt/exception. */
portENABLE_INTERRUPTS();
}
}
}
/*-----------------------------------------------------------*/
/*
* Initialise the stack of a task to look exactly as if a call to
* portSAVE_CONTEXT had been called.
*
* See header file for description.
*/
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
/* Setup the initial stack of the task. The stack is set exactly as
expected by the portRESTORE_CONTEXT() macro. */
/* When the task starts, it will expect to find the function parameter in R12. */
pxTopOfStack--;
*pxTopOfStack-- = ( StackType_t ) 0x08080808; /* R8 */
*pxTopOfStack-- = ( StackType_t ) 0x09090909; /* R9 */
*pxTopOfStack-- = ( StackType_t ) 0x0A0A0A0A; /* R10 */
*pxTopOfStack-- = ( StackType_t ) 0x0B0B0B0B; /* R11 */
*pxTopOfStack-- = ( StackType_t ) pvParameters; /* R12 */
*pxTopOfStack-- = ( StackType_t ) 0xDEADBEEF; /* R14/LR */
*pxTopOfStack-- = ( StackType_t ) pxCode + portINSTRUCTION_SIZE; /* R15/PC */
*pxTopOfStack-- = ( StackType_t ) portINITIAL_SR; /* SR */
*pxTopOfStack-- = ( StackType_t ) 0xFF0000FF; /* R0 */
*pxTopOfStack-- = ( StackType_t ) 0x01010101; /* R1 */
*pxTopOfStack-- = ( StackType_t ) 0x02020202; /* R2 */
*pxTopOfStack-- = ( StackType_t ) 0x03030303; /* R3 */
*pxTopOfStack-- = ( StackType_t ) 0x04040404; /* R4 */
*pxTopOfStack-- = ( StackType_t ) 0x05050505; /* R5 */
*pxTopOfStack-- = ( StackType_t ) 0x06060606; /* R6 */
*pxTopOfStack-- = ( StackType_t ) 0x07070707; /* R7 */
*pxTopOfStack = ( StackType_t ) portNO_CRITICAL_NESTING; /* ulCriticalNesting */
return pxTopOfStack;
}
/*-----------------------------------------------------------*/
BaseType_t xPortStartScheduler( void )
{
/* Start the timer that generates the tick ISR. Interrupts are disabled
here already. */
prvSetupTimerInterrupt();
/* Start the first task. */
portRESTORE_CONTEXT();
/* Should not get here! */
return 0;
}
/*-----------------------------------------------------------*/
void vPortEndScheduler( void )
{
/* It is unlikely that the AVR32 port will require this function as there
is nothing to return to. */
}
/*-----------------------------------------------------------*/
/* Schedule the COUNT&COMPARE match interrupt in (configCPU_CLOCK_HZ/configTICK_RATE_HZ)
clock cycles from now. */
#if( configTICK_USE_TC==0 )
static void prvScheduleFirstTick(void)
{
uint32_t lCycles;
lCycles = Get_system_register(AVR32_COUNT);
lCycles += (configCPU_CLOCK_HZ/configTICK_RATE_HZ);
// If lCycles ends up to be 0, make it 1 so that the COMPARE and exception
// generation feature does not get disabled.
if(0 == lCycles)
{
lCycles++;
}
Set_system_register(AVR32_COMPARE, lCycles);
}
__attribute__((__noinline__)) static void prvScheduleNextTick(void)
{
uint32_t lCycles, lCount;
lCycles = Get_system_register(AVR32_COMPARE);
lCycles += (configCPU_CLOCK_HZ/configTICK_RATE_HZ);
// If lCycles ends up to be 0, make it 1 so that the COMPARE and exception
// generation feature does not get disabled.
if(0 == lCycles)
{
lCycles++;
}
lCount = Get_system_register(AVR32_COUNT);
if( lCycles < lCount )
{ // We missed a tick, recover for the next.
lCycles += (configCPU_CLOCK_HZ/configTICK_RATE_HZ);
}
Set_system_register(AVR32_COMPARE, lCycles);
}
#else
__attribute__((__noinline__)) static void prvClearTcInt(void)
{
AVR32_TC.channel[configTICK_TC_CHANNEL].sr;
}
#endif
/*-----------------------------------------------------------*/
/* Setup the timer to generate the tick interrupts. */
static void prvSetupTimerInterrupt(void)
{
#if( configTICK_USE_TC==1 )
volatile avr32_tc_t *tc = &AVR32_TC;
// Options for waveform genration.
tc_waveform_opt_t waveform_opt =
{
.channel = configTICK_TC_CHANNEL, /* Channel selection. */
.bswtrg = TC_EVT_EFFECT_NOOP, /* Software trigger effect on TIOB. */
.beevt = TC_EVT_EFFECT_NOOP, /* External event effect on TIOB. */
.bcpc = TC_EVT_EFFECT_NOOP, /* RC compare effect on TIOB. */
.bcpb = TC_EVT_EFFECT_NOOP, /* RB compare effect on TIOB. */
.aswtrg = TC_EVT_EFFECT_NOOP, /* Software trigger effect on TIOA. */
.aeevt = TC_EVT_EFFECT_NOOP, /* External event effect on TIOA. */
.acpc = TC_EVT_EFFECT_NOOP, /* RC compare effect on TIOA: toggle. */
.acpa = TC_EVT_EFFECT_NOOP, /* RA compare effect on TIOA: toggle (other possibilities are none, set and clear). */
.wavsel = TC_WAVEFORM_SEL_UP_MODE_RC_TRIGGER,/* Waveform selection: Up mode without automatic trigger on RC compare. */
.enetrg = FALSE, /* External event trigger enable. */
.eevt = 0, /* External event selection. */
.eevtedg = TC_SEL_NO_EDGE, /* External event edge selection. */
.cpcdis = FALSE, /* Counter disable when RC compare. */
.cpcstop = FALSE, /* Counter clock stopped with RC compare. */
.burst = FALSE, /* Burst signal selection. */
.clki = FALSE, /* Clock inversion. */
.tcclks = TC_CLOCK_SOURCE_TC2 /* Internal source clock 2. */
};
tc_interrupt_t tc_interrupt =
{
.etrgs=0,
.ldrbs=0,
.ldras=0,
.cpcs =1,
.cpbs =0,
.cpas =0,
.lovrs=0,
.covfs=0,
};
#endif
/* Disable all interrupt/exception. */
portDISABLE_INTERRUPTS();
/* Register the compare interrupt handler to the interrupt controller and
enable the compare interrupt. */
#if( configTICK_USE_TC==1 )
{
INTC_register_interrupt(&vTick, configTICK_TC_IRQ, INT0);
/* Initialize the timer/counter. */
tc_init_waveform(tc, &waveform_opt);
/* Set the compare triggers.
Remember TC counter is 16-bits, so counting second is not possible!
That's why we configure it to count ms. */
tc_write_rc( tc, configTICK_TC_CHANNEL, ( configPBA_CLOCK_HZ / 4) / configTICK_RATE_HZ );
tc_configure_interrupts( tc, configTICK_TC_CHANNEL, &tc_interrupt );
/* Start the timer/counter. */
tc_start(tc, configTICK_TC_CHANNEL);
}
#else
{
INTC_register_interrupt(&vTick, AVR32_CORE_COMPARE_IRQ, INT0);
prvScheduleFirstTick();
}
#endif
}

667
FreeRTOSv10.2.1/FreeRTOS/Source/portable/GCC/AVR32_UC3/portmacro.h Normal file
View File

@ -0,0 +1,667 @@
/*This file has been prepared for Doxygen automatic documentation generation.*/
/*! \file *********************************************************************
*
* \brief FreeRTOS port source for AVR32 UC3.
*
* - Compiler: GNU GCC for AVR32
* - Supported devices: All AVR32 devices can be used.
* - AppNote:
*
* \author Atmel Corporation: http://www.atmel.com \n
* Support and FAQ: http://support.atmel.no/
*
*****************************************************************************/
/*
* FreeRTOS Kernel V10.2.1
* Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* http://www.FreeRTOS.org
* http://aws.amazon.com/freertos
*
* 1 tab == 4 spaces!
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
/*-----------------------------------------------------------
* Port specific definitions.
*
* The settings in this file configure FreeRTOS correctly for the
* given hardware and compiler.
*
* These settings should not be altered.
*-----------------------------------------------------------
*/
#include <avr32/io.h>
#include "intc.h"
#include "compiler.h"
#ifdef __cplusplus
extern "C" {
#endif
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE uint32_t
#define portBASE_TYPE long
typedef portSTACK_TYPE StackType_t;
typedef long BaseType_t;
typedef unsigned long UBaseType_t;
#define TASK_DELAY_MS(x) ( (x) /portTICK_PERIOD_MS )
#define TASK_DELAY_S(x) ( (x)*1000 /portTICK_PERIOD_MS )
#define TASK_DELAY_MIN(x) ( (x)*60*1000/portTICK_PERIOD_MS )
#define configTICK_TC_IRQ ATPASTE2(AVR32_TC_IRQ, configTICK_TC_CHANNEL)
#if( configUSE_16_BIT_TICKS == 1 )
typedef uint16_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffff
#else
typedef uint32_t TickType_t;
#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
#endif
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH ( -1 )
#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
#define portBYTE_ALIGNMENT 4
#define portNOP() {__asm__ __volatile__ ("nop");}
/*-----------------------------------------------------------*/
/*-----------------------------------------------------------*/
/* INTC-specific. */
#define DISABLE_ALL_EXCEPTIONS() Disable_global_exception()
#define ENABLE_ALL_EXCEPTIONS() Enable_global_exception()
#define DISABLE_ALL_INTERRUPTS() Disable_global_interrupt()
#define ENABLE_ALL_INTERRUPTS() Enable_global_interrupt()
#define DISABLE_INT_LEVEL(int_lev) Disable_interrupt_level(int_lev)
#define ENABLE_INT_LEVEL(int_lev) Enable_interrupt_level(int_lev)
/*
* Debug trace.
* Activated if and only if configDBG is nonzero.
* Prints a formatted string to stdout.
* The current source file name and line number are output with a colon before
* the formatted string.
* A carriage return and a linefeed are appended to the output.
* stdout is redirected to the USART configured by configDBG_USART.
* The parameters are the same as for the standard printf function.
* There is no return value.
* SHALL NOT BE CALLED FROM WITHIN AN INTERRUPT as fputs and printf use malloc,
* which is interrupt-unsafe with the current __malloc_lock and __malloc_unlock.
*/
#if configDBG
#define portDBG_TRACE(...) \
{\
fputs(__FILE__ ":" ASTRINGZ(__LINE__) ": ", stdout);\
printf(__VA_ARGS__);\
fputs("\r\n", stdout);\
}
#else
#define portDBG_TRACE(...)
#endif
/* Critical section management. */
#define portDISABLE_INTERRUPTS() DISABLE_ALL_INTERRUPTS()
#define portENABLE_INTERRUPTS() ENABLE_ALL_INTERRUPTS()
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
/* Added as there is no such function in FreeRTOS. */
extern void *pvPortRealloc( void *pv, size_t xSize );
/*-----------------------------------------------------------*/
/*=============================================================================================*/
/*
* Restore Context for cases other than INTi.
*/
#define portRESTORE_CONTEXT() \
{ \
extern volatile uint32_t ulCriticalNesting; \
extern volatile void *volatile pxCurrentTCB; \
\
__asm__ __volatile__ ( \
/* Set SP to point to new stack */ \
"mov r8, LO(%[pxCurrentTCB]) \n\t"\
"orh r8, HI(%[pxCurrentTCB]) \n\t"\
"ld.w r0, r8[0] \n\t"\
"ld.w sp, r0[0] \n\t"\
\
/* Restore ulCriticalNesting variable */ \
"ld.w r0, sp++ \n\t"\
"mov r8, LO(%[ulCriticalNesting]) \n\t"\
"orh r8, HI(%[ulCriticalNesting]) \n\t"\
"st.w r8[0], r0 \n\t"\
\
/* Restore R0..R7 */ \
"ldm sp++, r0-r7 \n\t"\
/* R0-R7 should not be used below this line */ \
/* Skip PC and SR (will do it at the end) */ \
"sub sp, -2*4 \n\t"\
/* Restore R8..R12 and LR */ \
"ldm sp++, r8-r12, lr \n\t"\
/* Restore SR */ \
"ld.w r0, sp[-8*4]\n\t" /* R0 is modified, is restored later. */ \
"mtsr %[SR], r0 \n\t"\
/* Restore r0 */ \
"ld.w r0, sp[-9*4] \n\t"\
/* Restore PC */ \
"ld.w pc, sp[-7*4]" /* Get PC from stack - PC is the 7th register saved */ \
: \
: [ulCriticalNesting] "i" (&ulCriticalNesting), \
[pxCurrentTCB] "i" (&pxCurrentTCB), \
[SR] "i" (AVR32_SR) \
); \
}
/*
* portSAVE_CONTEXT_INT() and portRESTORE_CONTEXT_INT(): for INT0..3 exceptions.
* portSAVE_CONTEXT_SCALL() and portRESTORE_CONTEXT_SCALL(): for the scall exception.
*
* Had to make different versions because registers saved on the system stack
* are not the same between INT0..3 exceptions and the scall exception.
*/
// Task context stack layout:
// R8 (*)
// R9 (*)
// R10 (*)
// R11 (*)
// R12 (*)
// R14/LR (*)
// R15/PC (*)
// SR (*)
// R0
// R1
// R2
// R3
// R4
// R5
// R6
// R7
// ulCriticalNesting
// (*) automatically done for INT0..INT3, but not for SCALL
/*
* The ISR used for the scheduler tick depends on whether the cooperative or
* the preemptive scheduler is being used.
*/
#if configUSE_PREEMPTION == 0
/*
* portSAVE_CONTEXT_OS_INT() for OS Tick exception.
*/
#define portSAVE_CONTEXT_OS_INT() \
{ \
/* Save R0..R7 */ \
__asm__ __volatile__ ("stm --sp, r0-r7"); \
\
/* With the cooperative scheduler, as there is no context switch by interrupt, */ \
/* there is also no context save. */ \
}
/*
* portRESTORE_CONTEXT_OS_INT() for Tick exception.
*/
#define portRESTORE_CONTEXT_OS_INT() \
{ \
__asm__ __volatile__ ( \
/* Restore R0..R7 */ \
"ldm sp++, r0-r7\n\t" \
\
/* With the cooperative scheduler, as there is no context switch by interrupt, */ \
/* there is also no context restore. */ \
"rete" \
); \
}
#else
/*
* portSAVE_CONTEXT_OS_INT() for OS Tick exception.
*/
#define portSAVE_CONTEXT_OS_INT() \
{ \
extern volatile uint32_t ulCriticalNesting; \
extern volatile void *volatile pxCurrentTCB; \
\
/* When we come here */ \
/* Registers R8..R12, LR, PC and SR had already been pushed to system stack */ \
\
__asm__ __volatile__ ( \
/* Save R0..R7 */ \
"stm --sp, r0-r7 \n\t"\
\
/* Save ulCriticalNesting variable - R0 is overwritten */ \
"mov r8, LO(%[ulCriticalNesting])\n\t" \
"orh r8, HI(%[ulCriticalNesting])\n\t" \
"ld.w r0, r8[0] \n\t"\
"st.w --sp, r0 \n\t"\
\
/* Check if INT0 or higher were being handled (case where the OS tick interrupted another */ \
/* interrupt handler (which was of a higher priority level but decided to lower its priority */ \
/* level and allow other lower interrupt level to occur). */ \
/* In this case we don't want to do a task switch because we don't know what the stack */ \
/* currently looks like (we don't know what the interrupted interrupt handler was doing). */ \
/* Saving SP in pxCurrentTCB and then later restoring it (thinking restoring the task) */ \
/* will just be restoring the interrupt handler, no way!!! */ \
/* So, since we won't do a vTaskSwitchContext(), it's of no use to save SP. */ \
"ld.w r0, sp[9*4]\n\t" /* Read SR in stack */ \
"bfextu r0, r0, 22, 3\n\t" /* Extract the mode bits to R0. */ \
"cp.w r0, 1\n\t" /* Compare the mode bits with supervisor mode(b'001) */ \
"brhi LABEL_INT_SKIP_SAVE_CONTEXT_%[LINE] \n\t"\
\
/* Store SP in the first member of the structure pointed to by pxCurrentTCB */ \
/* NOTE: we don't enter a critical section here because all interrupt handlers */ \
/* MUST perform a SAVE_CONTEXT/RESTORE_CONTEXT in the same way as */ \
/* portSAVE_CONTEXT_OS_INT/port_RESTORE_CONTEXT_OS_INT if they call OS functions. */ \
/* => all interrupt handlers must use portENTER_SWITCHING_ISR/portEXIT_SWITCHING_ISR. */ \
"mov r8, LO(%[pxCurrentTCB])\n\t" \
"orh r8, HI(%[pxCurrentTCB])\n\t" \
"ld.w r0, r8[0]\n\t" \
"st.w r0[0], sp\n" \
\
"LABEL_INT_SKIP_SAVE_CONTEXT_%[LINE]:" \
: \
: [ulCriticalNesting] "i" (&ulCriticalNesting), \
[pxCurrentTCB] "i" (&pxCurrentTCB), \
[LINE] "i" (__LINE__) \
); \
}
/*
* portRESTORE_CONTEXT_OS_INT() for Tick exception.
*/
#define portRESTORE_CONTEXT_OS_INT() \
{ \
extern volatile uint32_t ulCriticalNesting; \
extern volatile void *volatile pxCurrentTCB; \
\
/* Check if INT0 or higher were being handled (case where the OS tick interrupted another */ \
/* interrupt handler (which was of a higher priority level but decided to lower its priority */ \
/* level and allow other lower interrupt level to occur). */ \
/* In this case we don't want to do a task switch because we don't know what the stack */ \
/* currently looks like (we don't know what the interrupted interrupt handler was doing). */ \
/* Saving SP in pxCurrentTCB and then later restoring it (thinking restoring the task) */ \
/* will just be restoring the interrupt handler, no way!!! */ \
__asm__ __volatile__ ( \
"ld.w r0, sp[9*4]\n\t" /* Read SR in stack */ \
"bfextu r0, r0, 22, 3\n\t" /* Extract the mode bits to R0. */ \
"cp.w r0, 1\n\t" /* Compare the mode bits with supervisor mode(b'001) */ \
"brhi LABEL_INT_SKIP_RESTORE_CONTEXT_%[LINE]" \
: \
: [LINE] "i" (__LINE__) \
); \
\
/* Else */ \
/* because it is here safe, always call vTaskSwitchContext() since an OS tick occurred. */ \
/* A critical section has to be used here because vTaskSwitchContext handles FreeRTOS linked lists. */\
portENTER_CRITICAL(); \
vTaskSwitchContext(); \
portEXIT_CRITICAL(); \
\
/* Restore all registers */ \
\
__asm__ __volatile__ ( \
/* Set SP to point to new stack */ \
"mov r8, LO(%[pxCurrentTCB]) \n\t"\
"orh r8, HI(%[pxCurrentTCB]) \n\t"\
"ld.w r0, r8[0] \n\t"\
"ld.w sp, r0[0] \n"\
\
"LABEL_INT_SKIP_RESTORE_CONTEXT_%[LINE]: \n\t"\
\
/* Restore ulCriticalNesting variable */ \
"ld.w r0, sp++ \n\t" \
"mov r8, LO(%[ulCriticalNesting]) \n\t"\
"orh r8, HI(%[ulCriticalNesting]) \n\t"\
"st.w r8[0], r0 \n\t"\
\
/* Restore R0..R7 */ \
"ldm sp++, r0-r7 \n\t"\
\
/* Now, the stack should be R8..R12, LR, PC and SR */ \
"rete" \
: \
: [ulCriticalNesting] "i" (&ulCriticalNesting), \
[pxCurrentTCB] "i" (&pxCurrentTCB), \
[LINE] "i" (__LINE__) \
); \
}
#endif
/*
* portSAVE_CONTEXT_SCALL() for SupervisorCALL exception.
*
* NOTE: taskYIELD()(== SCALL) MUST NOT be called in a mode > supervisor mode.
*
*/
#define portSAVE_CONTEXT_SCALL() \
{ \
extern volatile uint32_t ulCriticalNesting; \
extern volatile void *volatile pxCurrentTCB; \
\
/* Warning: the stack layout after SCALL doesn't match the one after an interrupt. */ \
/* If SR[M2:M0] == 001 */ \
/* PC and SR are on the stack. */ \
/* Else (other modes) */ \
/* Nothing on the stack. */ \
\
/* WARNING NOTE: the else case cannot happen as it is strictly forbidden to call */ \
/* vTaskDelay() and vTaskDelayUntil() OS functions (that result in a taskYield()) */ \
/* in an interrupt|exception handler. */ \
\
__asm__ __volatile__ ( \
/* in order to save R0-R7 */ \
"sub sp, 6*4 \n\t"\
/* Save R0..R7 */ \
"stm --sp, r0-r7 \n\t"\
\
/* in order to save R8-R12 and LR */ \
/* do not use SP if interrupts occurs, SP must be left at bottom of stack */ \
"sub r7, sp,-16*4 \n\t"\
/* Copy PC and SR in other places in the stack. */ \
"ld.w r0, r7[-2*4] \n\t" /* Read SR */\
"st.w r7[-8*4], r0 \n\t" /* Copy SR */\
"ld.w r0, r7[-1*4] \n\t" /* Read PC */\
"st.w r7[-7*4], r0 \n\t" /* Copy PC */\
\
/* Save R8..R12 and LR on the stack. */ \
"stm --r7, r8-r12, lr \n\t"\
\
/* Arriving here we have the following stack organizations: */ \
/* R8..R12, LR, PC, SR, R0..R7. */ \
\
/* Now we can finalize the save. */ \
\
/* Save ulCriticalNesting variable - R0 is overwritten */ \
"mov r8, LO(%[ulCriticalNesting]) \n\t"\
"orh r8, HI(%[ulCriticalNesting]) \n\t"\
"ld.w r0, r8[0] \n\t"\
"st.w --sp, r0" \
: \
: [ulCriticalNesting] "i" (&ulCriticalNesting) \
); \
\
/* Disable the its which may cause a context switch (i.e. cause a change of */ \
/* pxCurrentTCB). */ \
/* Basically, all accesses to the pxCurrentTCB structure should be put in a */ \
/* critical section because it is a global structure. */ \
portENTER_CRITICAL(); \
\
/* Store SP in the first member of the structure pointed to by pxCurrentTCB */ \
__asm__ __volatile__ ( \
"mov r8, LO(%[pxCurrentTCB]) \n\t"\
"orh r8, HI(%[pxCurrentTCB]) \n\t"\
"ld.w r0, r8[0] \n\t"\
"st.w r0[0], sp" \
: \
: [pxCurrentTCB] "i" (&pxCurrentTCB) \
); \
}
/*
* portRESTORE_CONTEXT() for SupervisorCALL exception.
*/
#define portRESTORE_CONTEXT_SCALL() \
{ \
extern volatile uint32_t ulCriticalNesting; \
extern volatile void *volatile pxCurrentTCB; \
\
/* Restore all registers */ \
\
/* Set SP to point to new stack */ \
__asm__ __volatile__ ( \
"mov r8, LO(%[pxCurrentTCB]) \n\t"\
"orh r8, HI(%[pxCurrentTCB]) \n\t"\
"ld.w r0, r8[0] \n\t"\
"ld.w sp, r0[0]" \
: \
: [pxCurrentTCB] "i" (&pxCurrentTCB) \
); \
\
/* Leave pxCurrentTCB variable access critical section */ \
portEXIT_CRITICAL(); \
\
__asm__ __volatile__ ( \
/* Restore ulCriticalNesting variable */ \
"ld.w r0, sp++ \n\t"\
"mov r8, LO(%[ulCriticalNesting]) \n\t"\
"orh r8, HI(%[ulCriticalNesting]) \n\t"\
"st.w r8[0], r0 \n\t"\
\
/* skip PC and SR */ \
/* do not use SP if interrupts occurs, SP must be left at bottom of stack */ \
"sub r7, sp, -10*4 \n\t"\
/* Restore r8-r12 and LR */ \
"ldm r7++, r8-r12, lr \n\t"\
\
/* RETS will take care of the extra PC and SR restore. */ \
/* So, we have to prepare the stack for this. */ \
"ld.w r0, r7[-8*4] \n\t" /* Read SR */\
"st.w r7[-2*4], r0 \n\t" /* Copy SR */\
"ld.w r0, r7[-7*4] \n\t" /* Read PC */\
"st.w r7[-1*4], r0 \n\t" /* Copy PC */\
\
/* Restore R0..R7 */ \
"ldm sp++, r0-r7 \n\t"\
\
"sub sp, -6*4 \n\t"\
\
"rets" \
: \
: [ulCriticalNesting] "i" (&ulCriticalNesting) \
); \
}
/*
* The ISR used depends on whether the cooperative or
* the preemptive scheduler is being used.
*/
#if configUSE_PREEMPTION == 0
/*
* ISR entry and exit macros. These are only required if a task switch
* is required from the ISR.
*/
#define portENTER_SWITCHING_ISR() \
{ \
/* Save R0..R7 */ \
__asm__ __volatile__ ("stm --sp, r0-r7"); \
\
/* With the cooperative scheduler, as there is no context switch by interrupt, */ \
/* there is also no context save. */ \
}
/*
* Input parameter: in R12, boolean. Perform a vTaskSwitchContext() if 1
*/
#define portEXIT_SWITCHING_ISR() \
{ \
__asm__ __volatile__ ( \
/* Restore R0..R7 */ \
"ldm sp++, r0-r7 \n\t"\
\
/* With the cooperative scheduler, as there is no context switch by interrupt, */ \
/* there is also no context restore. */ \
"rete" \
); \
}
#else
/*
* ISR entry and exit macros. These are only required if a task switch
* is required from the ISR.
*/
#define portENTER_SWITCHING_ISR() \
{ \
extern volatile uint32_t ulCriticalNesting; \
extern volatile void *volatile pxCurrentTCB; \
\
/* When we come here */ \
/* Registers R8..R12, LR, PC and SR had already been pushed to system stack */ \
\
__asm__ __volatile__ ( \
/* Save R0..R7 */ \
"stm --sp, r0-r7 \n\t"\
\
/* Save ulCriticalNesting variable - R0 is overwritten */ \
"mov r8, LO(%[ulCriticalNesting]) \n\t"\
"orh r8, HI(%[ulCriticalNesting]) \n\t"\
"ld.w r0, r8[0] \n\t"\
"st.w --sp, r0 \n\t"\
\
/* Check if INT0 or higher were being handled (case where the OS tick interrupted another */ \
/* interrupt handler (which was of a higher priority level but decided to lower its priority */ \
/* level and allow other lower interrupt level to occur). */ \
/* In this case we don't want to do a task switch because we don't know what the stack */ \
/* currently looks like (we don't know what the interrupted interrupt handler was doing). */ \
/* Saving SP in pxCurrentTCB and then later restoring it (thinking restoring the task) */ \
/* will just be restoring the interrupt handler, no way!!! */ \
/* So, since we won't do a vTaskSwitchContext(), it's of no use to save SP. */ \
"ld.w r0, sp[9*4] \n\t" /* Read SR in stack */\
"bfextu r0, r0, 22, 3 \n\t" /* Extract the mode bits to R0. */\
"cp.w r0, 1 \n\t" /* Compare the mode bits with supervisor mode(b'001) */\
"brhi LABEL_ISR_SKIP_SAVE_CONTEXT_%[LINE] \n\t"\
\
/* Store SP in the first member of the structure pointed to by pxCurrentTCB */ \
"mov r8, LO(%[pxCurrentTCB]) \n\t"\
"orh r8, HI(%[pxCurrentTCB]) \n\t"\
"ld.w r0, r8[0] \n\t"\
"st.w r0[0], sp \n"\
\
"LABEL_ISR_SKIP_SAVE_CONTEXT_%[LINE]:" \
: \
: [ulCriticalNesting] "i" (&ulCriticalNesting), \
[pxCurrentTCB] "i" (&pxCurrentTCB), \
[LINE] "i" (__LINE__) \
); \
}
/*
* Input parameter: in R12, boolean. Perform a vTaskSwitchContext() if 1
*/
#define portEXIT_SWITCHING_ISR() \
{ \
extern volatile uint32_t ulCriticalNesting; \
extern volatile void *volatile pxCurrentTCB; \
\
__asm__ __volatile__ ( \
/* Check if INT0 or higher were being handled (case where the OS tick interrupted another */ \
/* interrupt handler (which was of a higher priority level but decided to lower its priority */ \
/* level and allow other lower interrupt level to occur). */ \
/* In this case it's of no use to switch context and restore a new SP because we purposedly */ \
/* did not previously save SP in its TCB. */ \
"ld.w r0, sp[9*4] \n\t" /* Read SR in stack */\
"bfextu r0, r0, 22, 3 \n\t" /* Extract the mode bits to R0. */\
"cp.w r0, 1 \n\t" /* Compare the mode bits with supervisor mode(b'001) */\
"brhi LABEL_ISR_SKIP_RESTORE_CONTEXT_%[LINE] \n\t"\
\
/* If a switch is required then we just need to call */ \
/* vTaskSwitchContext() as the context has already been */ \
/* saved. */ \
"cp.w r12, 1 \n\t" /* Check if Switch context is required. */\
"brne LABEL_ISR_RESTORE_CONTEXT_%[LINE]" \
: \
: [LINE] "i" (__LINE__) \
); \
\
/* A critical section has to be used here because vTaskSwitchContext handles FreeRTOS linked lists. */ \
portENTER_CRITICAL(); \
vTaskSwitchContext(); \
portEXIT_CRITICAL(); \
\
__asm__ __volatile__ ( \
"LABEL_ISR_RESTORE_CONTEXT_%[LINE]: \n\t"\
/* Restore the context of which ever task is now the highest */ \
/* priority that is ready to run. */ \
\
/* Restore all registers */ \
\
/* Set SP to point to new stack */ \
"mov r8, LO(%[pxCurrentTCB]) \n\t"\
"orh r8, HI(%[pxCurrentTCB]) \n\t"\
"ld.w r0, r8[0] \n\t"\
"ld.w sp, r0[0] \n"\
\
"LABEL_ISR_SKIP_RESTORE_CONTEXT_%[LINE]: \n\t"\
\
/* Restore ulCriticalNesting variable */ \
"ld.w r0, sp++ \n\t"\
"mov r8, LO(%[ulCriticalNesting]) \n\t"\
"orh r8, HI(%[ulCriticalNesting]) \n\t"\
"st.w r8[0], r0 \n\t"\
\
/* Restore R0..R7 */ \
"ldm sp++, r0-r7 \n\t"\
\
/* Now, the stack should be R8..R12, LR, PC and SR */ \
"rete" \
: \
: [ulCriticalNesting] "i" (&ulCriticalNesting), \
[pxCurrentTCB] "i" (&pxCurrentTCB), \
[LINE] "i" (__LINE__) \
); \
}
#endif
#define portYIELD() {__asm__ __volatile__ ("scall");}
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */