Firmwares/raven_spn/src/init.h

108 lines
2.8 KiB
C
Raw Normal View History

#ifndef SRC_INIT_H_
#define SRC_INIT_H_
#include <cstdio>
#include <array>
#include "delay.h"
#include "bsp.h"
#include "plic/plic_driver.h"
typedef void (*function_ptr_t) (void);
//! Instance data for the PLIC.
plic_instance_t g_plic;
std::array<function_ptr_t,PLIC_NUM_INTERRUPTS> g_ext_interrupt_handlers;
2021-04-20 08:30:39 +02:00
bool spn1_hw_interrupt{true};
bool spn2_hw_interrupt{true};
/*! \brief external interrupt handler
*
* routes the peripheral interrupts to the the respective handler
*
*/
extern "C" void handle_m_ext_interrupt() {
plic_source int_num = PLIC_claim_interrupt(&g_plic);
if ((int_num >=1 ) && (int_num < PLIC_NUM_INTERRUPTS))
g_ext_interrupt_handlers[int_num]();
else
exit(1 + (uintptr_t) int_num);
PLIC_complete_interrupt(&g_plic, int_num);
}
/*! \brief dummy interrupt handler
*
*/
void no_interrupt_handler (void) {};
/*! \brief configure the per-interrupt handler
*
*/
void configure_irq(size_t irq_num, function_ptr_t handler, unsigned char prio=1) {
g_ext_interrupt_handlers[irq_num] = handler;
// Priority must be set > 0 to trigger the interrupt.
PLIC_set_priority(&g_plic, irq_num, prio);
// Have to enable the interrupt both at the GPIO level, and at the PLIC level.
PLIC_enable_interrupt(&g_plic, irq_num);
}
2021-04-20 08:30:39 +02:00
void wait_for_spn1_interrupt() {
// wait until HW is done
if(spn1_hw_interrupt) {
do{
asm("wfi");
asm("nop");
}while(spn1_hw_interrupt);
}
spn1_hw_interrupt=true;
}
2021-04-20 08:30:39 +02:00
void wait_for_spn2_interrupt() {
// wait until HW is done
2021-04-20 08:30:39 +02:00
if(spn2_hw_interrupt) {
do{
asm("wfi");
asm("nop");
2021-04-20 08:30:39 +02:00
}while(spn2_hw_interrupt);
}
2021-04-20 08:30:39 +02:00
spn2_hw_interrupt=true;
}
2021-05-17 11:54:37 +02:00
void wait_for_spn_interrupts() {
if(spn1_hw_interrupt || spn2_hw_interrupt) {
do{
asm("wfi");
asm("nop");
}while(spn1_hw_interrupt || spn2_hw_interrupt);
}
spn1_hw_interrupt=true;
spn2_hw_interrupt=true;
}
/*!\brief initializes platform
*
*/
void platform_init(){
// UART init section TODO: clarify how to get the functions from init.c?
GPIO_REG(GPIO_IOF_SEL) &= ~IOF0_UART0_MASK;
GPIO_REG(GPIO_IOF_EN) |= IOF0_UART0_MASK;
UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
F_CPU=PRCI_measure_mcycle_freq(20, RTC_FREQ);
printf("core freq at %d Hz\n", F_CPU);
// initialie interupt & trap handling
write_csr(mtvec, &trap_entry);
PLIC_init(&g_plic, PLIC_CTRL_ADDR, PLIC_NUM_INTERRUPTS, PLIC_NUM_PRIORITIES, 0);
// Disable the machine & timer interrupts until setup is done.
clear_csr(mie, MIP_MEIP);
clear_csr(mie, MIP_MTIP);
for (auto& h:g_ext_interrupt_handlers) h=no_interrupt_handler;
// Enable interrupts in general.
set_csr(mstatus, MSTATUS_MIE);
// Enable the Machine-External bit in MIE
set_csr(mie, MIP_MEIP);
//hw_interrupt = false;
}
#endif /* SRC_INIT_H_ */