Similarly to what is done for SPELP, handle SSTATUS.SDT upon event
injection. In order to mimick an interrupt, set SDT to 1 for injection and
save its previous value in interrupted_flags[5:5]. Restore it upon
completion.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
As raised during the ARC review, SPELP was not handled during the event
injection process. Save it as part of the interrupted flags, clear it
before injecting the event and restore it after completion.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
For some reason, there was a pair of useless parenthesis around MSTATUS_*
value usage. Remove them.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
As raised by Andrew on the kvm-unit-test review, this flags are meant to
hold SSTATUS bits in the specification. Rename them to match that.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
The SSE specification did specified that read only parameters should
return SBI_EBADRANGE but was modified recently to return SBI_EDENIED.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
The latest specification added new high priority RAS events and renamed
the PMU to PMU_OVERFLOW.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Harts associated with an ACLINT_MSWI need not have sequential hartids.
It is insufficient to use first_hartid and hart_count. To account for
non-sequential hart ids, include the empty hart-ids' generate hart-count.
Signed-off-by: Raj Vishwanathan <Raj.Vishwanathan@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Simplify the code and improve consistency by using the new macros where
possible. sbi_hart_count() obsoletes sbi_scratch_last_hartindex().
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
There is currently no helper for iterating through the harts in a
system, and code must choose between sbi_scratch_last_hartindex() and
sbi_platform_hart_count() for the loop condition.
sbi_scratch_last_hartindex() has unusual semantics, leading to the
likelihood of off-by-one errors, and sbi_platform_hart_count() is
provided by the platform and so may not be properly bounded.
Add a new helper which definitively reports the number of harts managed
by this OpenSBI instance, i.e. the number of valid hart indexes, and a
convenient iterator macro.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The compiler generates much better code for sbi_hartindex_to_hartid()
and sbi_hartindex_to_scratch() when using a constant for the bounds
check. This works out nicely because the underlying arrays are already
a constant size, so the only change needed is to fill the remainder of
each array with the appropriate default/out-of-bounds value. The
ellipsis in the designated initializer is a GCC extension (also
supported by Clang), but avoids runtime initialization of the array.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The internal limit on the number of harts is SBI_HARTMASK_MAX_BITS, as
this value determines the size of various bitmaps and arrays (including
hartindex_to_hartid_table and hartindex_to_scratch_table). Clamp the
value provided by the platform, and drop the extra array element.
Update the documentation to indicate that hart_index2id must be sized
based on hart_count, and that hart indexes must be contiguous. As of
commit 5e90e54a1a ("lib: utils:Check that hartid is valid"), there is
no restriction on the valid hart ID values.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
OpenSBI is compiled with -fPIE, which generally implies dynamic linking.
This causes the compiler to generate GOT references for global symbols
in order to support runtime symbol interposition. However, OpenSBI does
not actually perform dynamic linking, so the GOT indirection just adds
unnecessary overhead.
The GOT references can be avoided by declaring global symbols with
hidden visibility, thus making them local to this dynamic object and
non-interposable. GCC/Clang's -fvisibility parameter is insufficient for
this purpose when referencing objects from other translation units;
either __attribute__((visibility(...)) or the pragma is required. Use
the pragma since it is easier to apply to every symbol. Additionally
clean up the one GOT reference from inline assembly.
With this change, a firmware linked with LLD does not contain either a
GOT or a PLT, and a firmware linked with BFD ld contains only a GOT with
a single (unreferenced, legacy) _GLOBAL_OFFSET_TABLE_ entry.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This reverts commit 6019259dfb.
Now that fdt_driver_init_by_offset() respects the compatible string
fallback priority order, this workaround is no longer necessary.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When matching drivers to DT nodes, always match all drivers against the
first compatible string before considering fallback compatible strings.
This ensures the most specific match is always selected, regardless of
the order of the drivers or match structures, as long as no compatible
string appears in multiple match structures.
Fixes: 1ccc52c427 ("lib: utils/fdt: Add helpers for generic driver initialization")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Return SBI_EALREADY error code instead of SBI_EINVAL, in case an
event is already added to the supported list.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In the original implementation of `sbi_strcpy` and `sbi_strncpy`, if the
destination buffer (`dest`) was longer than the source string (`src`),
the functions did not ensure that the remaining bytes in `dest` were
properly null-terminated. This could result in garbage data being
present in the destination buffer after the copy operation, as the
functions only copied characters from `src` without explicitly
terminating `dest`.
Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch adds unit tests for verifying the sbi_ecall version,
impid handling, and extension registration functions. The tests
ensure that the extension registration and unregistration work
as expected.
Signed-off-by: Akshay Behl <akshaybehl231@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Latest modifications to the spec mandates that a set on a lock feature
returns SBI_ERR_DENIED_LOCKED.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The T-HEAD C90x PLIC has some special quirks, such as the S-mode
delegation bit. OpenSBI currently handles this by checking the compatible
string in the device tree.
However, this matching is done in the order of the fdt_match array. So if
a device tree contains both strings, for example:
compatible = "thead,c900-plic", "riscv,plic0";
Then OpenSBI will match against the generic "riscv,plic0" string, since
that appears first in the fdt_match array. This means it will fail to set
the S-mode delegation bit, and Linux will fail to boot. In some cases, it
is not possible to change the compatible string to just the T-HEAD PLIC,
as older versions of Linux only recognize the RISC-V compatible string.
This patch fixes that by moving the RISC-V string to the end, ensuring
that the more specific options get matched first.
Signed-off-by: Alex Studer <alex@studer.dev>
Reviewed-by: Anup Patel <anup@brainfault.org>
This reduces .bss size by 8 KiB, and should reduce overall memory usage
since most platforms will have significantly fewer than 512 entries in
this table. At the same time, it removes the fixed table size limit.
Since the table is only used within fdt_pmu.c, instead of updating the
extern declaration, make the table local to this file.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If a property value is too small, len will be zero after the division
on the next line, so the property will be ignored. This is the same
behavior as when the length check fails. Furthermore, the first two
length checks were already ineffectual, because each item in those
arrays is 12 bytes long, not 8.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When called twice, sse_hart_mask()/sse_hart_unmask() should return
SBI_EALREADY_STOPPED/SBI_EALREADY_STARTED. This was currently inverted.
Fixes: b919daf495 ("lib: sbi: Add support to mask/unmask SSE events")
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the sbi_sse_init() in cold boot path is called after
sbi_domain_finalize() so boot HART of non-root domains will start
before SSE cold boot init which can cause warm boot of such HARTs
to crash in sbi_sse_init().
To address the above issue, factor-out the non-root domain startup
from sbi_domain_finalize() function as a separate sbi_domain_startup()
function which can be called after sbi_sse_init() in cold boot path.
Fixes: 93f7d819fd ("lib: sbi: sse: allow adding new events")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The latest SBI 3.0 spec defines a new sbi_mpxy_get_shmem_size()
function and simplifies sbi_mpxy_set_shmem() function so update
the MPXY framework and SBI extension accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The supervisor software can directly receive most of the system MSIs
except P2A doorbell and MSIs preferred to be handled in M-mode.
Add MPXY RPMI mailbox client driver for the System MSI service group.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The service group ID assignment and some of the BASE services have
changes in the latest RPMI specification so let's update the RPMI
implementation accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Use the RPMI mailbox channel attributes to populate MPXY channel
attributes instead of hard coding them.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
To allow clients query service group version of a RPMI mailbox channel,
implement get_attribute() callback for the RPMI shared memory mailbox
controller.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The local variable declarations should be at the start of function
and preferrably organized like a inverted pyramid.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Currently, the common MPXY RPMI mailbox client does not support
notifications so no need for dummy notifications support.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The local variable declarations should be at the start of function
and preferrably organized like a inverted pyramid.
Signed-off-by: Anup patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The capability bit assignment in MPXY framework does not match the
SBI MPXY extension in latest SBI specification so update it.
Fixes: 7939bf1329 ("lib: sbi: Add SBI Message Proxy (MPXY) framework")
Signed-off-by: Anup patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Some of the RPMI service groups may need additional context and
special handling when transferring messages via underlying mailbox
channel so introduce optional MPXY RPMI service group operations
for this purpose.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The mpxy_rpmi_mbox_data is provided by RPMI service group specific
MPXY driver to the common MPXY RPMI mailbox client implementation
so let's constantify mpxy_rpmi_mbox_data in mpxy_rpmi_mbox so that
it is not accidently modified.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Instead of having one common FDT MPXY RPMI mailbox client drivers
for various RPMI service groups, split this driver into two parts:
1) Common MPXY RPMI mailbox client library
2) MPXY driver for RPMI clock service group
The above split enables having a separate MPXY driver for each
RPMI clock service group and #1 (above) will allow code sharing
between various MPXY RPMI drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
With the "max" QEMU cpu, the displayed extension string is truncated due
to the buffer being too small. Increase it to 256 to display the full
set of extensions correctly.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For driver subsystems that are not tightly integrated into the OpenSBI
init sequence, it is not important that the drivers are initialized in
any particular order. By putting all of these drivers in one array, they
can all be initialized with a single pass through the devicetree. This
saves about 10 ms of boot time on HiFive Unmatched.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that all drivers are using the fdt_driver functions for
initialization, this function is unused and can be removed.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The irqchip driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_irqchip_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
