sbi_ipi_init() expects the platform warm init function to clear IPIs
on the local hart, but there is already a generic function to do this.
After this change, none of the existing drivers need a warm init
callback.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that driver lifecycle is managed from within the SBI timer core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the platform's timer device is tracked in two places: the
core SBI implementation has `timer_dev`, and the FDT timer layer has
`current_driver`. The latter is used for warm initialization of the
timer device. However, this warm init is not specific to FDT-based
platforms; other platforms call exactly the same functions from the
same point in the boot sequence.
The code is simplified and made common across platforms by treating warm
init and exit as properties of the driver, not the platform. Then the
platform's only role is to select and prepare a driver during cold boot.
For now, only add a .warm_init hook, since none of the existing drivers
need an .exit hook. It could be added in the future if needed.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Help tracking the lifecycle of the FDT blob by indicating which parts of
the firmware modify it, and thus invalidate any previously-obtained
offsets or pointers to data inside the blob.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_console_init() does not do any special initialization so
setup serial console device in early_init() so that console prints
work as early as possible.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
On platforms with Smepmp, the MMIO regions accessed by M-mode need
to be explicitly marked with M-mode only read/write or shared (both
(M-mode and S-mode) read/write permission.
If the above is not done then runtime PLIC access from M-mode on
platforms with Smepmp will result in access fault when further
results in CPU hotplug not working.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We extend struct sbi_platform and struct sbi_scratch to allow platforms
specify the heap size to the OpenSBI firmwares. The OpenSBI firmwares
will use this information to determine the location of heap and provide
heap base address in per-HART scratch space.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
C language standard uses true/false for the boolean type.
Let's switch to that for better language compatibility.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
This simply adds an helper to get fdt address which is more explicit than
sbi_scratch_thishart_arg1_ptr.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
To support different handlers for different types of resets, we are
adding a sbi_list of restart handlers.
Instead of sbi_system_reset_set_device we use
sbi_system_reset_add_device to reflect the actual meaning.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Generic mdelay() and udelay() functions can be provided by the
sbi_timer framework if timer frequency is available in the timer
instance provided by the platform support or timer driver.
This patch adds timer frequency (timer_freq) member in the
struct sbi_timer_device for above purpose.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We extend the ACLINT library to support separate base addresses
for MTIME and MTIMECMP registers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The ACLINT devices are backward compatible with SiFive CLINT
so we replace all CLINT library usage in various platforms
with ACLINT library. As a result of this replacement, the
CLINT library is not used by any part of OpenSBI hence we
remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Instead of having system_reset_check() and system_reset() callbacks
in platform operations, it will be much simpler for reset driver to
directly register these operations as a device to the sbi_system
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having ipi_send() and ipi_clear() callbacks in
platform operations, it will be much simpler for ipi driver
to directly register these operations as a device to sbi_ipi
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having timer_value(), timer_event_start(), and
timer_event_stop() callbacks in platform operations, it will
be much simpler for timer driver to directly register these
operations as device to the sbi_timer implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having console_putc() and console_getc() callbacks in
platform operations, it will be much simpler for console driver to
directly register these operations as device to the sbi_console
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
To implement the SBI SRST extension, we need two platform operations
for system reset:
1) system_reset_check() - This operation will check whether given
reset type and reason are supported by the platform
2) system_reset() - This operation will do the actual platform
system reset and it will not return if reset type and reason
are supported by the platform
This patch updates system reset related code everywhere as-per above.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Changes are made to support our FPGA evaluation board,
it has DDR memory(0xA0000000-0xB0000000).
* Adapt the config.mk to match FPGA evaluation board DDR memory address
* Since the RISC-V CPU core frequency of FPGA might change, so we use the
fixed TIMER frequency to measure the real CPU core frequency.
* And the UART baudrate has to set to 57600bps for Nuclei FPGA evaluation
board when CPU core frequency is about 8MHz, otherwise the UART input
will not work correctly.
Signed-off-by: Huaqi Fang <578567190@qq.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We extend CLINT cold init function to have a "struct clint_data *"
parameter pointing to CLINT details. This allows platforms to use
CLINT functions for multiple CLINT instances.
When multiple CLINTs are present, the platform can also provide
one of the CLINT as reference CLINT for other CLINTs. This will
help CLINTs to sync their time value with reference CLINT using
a time_delta computed in warm init function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend all PLIC functions to have a "struct plic_data *"
parameter pointing to PLIC details. This allows platforms to
use these functions for multiple PLIC instances.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The "target_hart" and "hart_count" parameters of PLIC cold and
warm init functions are only used for sanity checks and not
required in PLIC initialization.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>