sbi_ipi_init() expects the platform warm init function to clear IPIs
on the local hart, but there is already a generic function to do this.
After this change, none of the existing drivers need a warm init
callback.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that driver lifecycle is managed from within the SBI timer core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the platform's timer device is tracked in two places: the
core SBI implementation has `timer_dev`, and the FDT timer layer has
`current_driver`. The latter is used for warm initialization of the
timer device. However, this warm init is not specific to FDT-based
platforms; other platforms call exactly the same functions from the
same point in the boot sequence.
The code is simplified and made common across platforms by treating warm
init and exit as properties of the driver, not the platform. Then the
platform's only role is to select and prepare a driver during cold boot.
For now, only add a .warm_init hook, since none of the existing drivers
need an .exit hook. It could be added in the future if needed.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Help tracking the lifecycle of the FDT blob by indicating which parts of
the firmware modify it, and thus invalidate any previously-obtained
offsets or pointers to data inside the blob.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_console_init() does not do any special initialization so
setup serial console device in early_init() so that console prints
work as early as possible.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
On platforms with Smepmp, the MMIO regions accessed by M-mode need
to be explicitly marked with M-mode only read/write or shared (both
(M-mode and S-mode) read/write permission.
If the above is not done then runtime PLIC access from M-mode on
platforms with Smepmp will result in access fault when further
results in CPU hotplug not working.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We extend struct sbi_platform and struct sbi_scratch to allow platforms
specify the heap size to the OpenSBI firmwares. The OpenSBI firmwares
will use this information to determine the location of heap and provide
heap base address in per-HART scratch space.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
C language standard uses true/false for the boolean type.
Let's switch to that for better language compatibility.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
This simply adds an helper to get fdt address which is more explicit than
sbi_scratch_thishart_arg1_ptr.
Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
To support different handlers for different types of resets, we are
adding a sbi_list of restart handlers.
Instead of sbi_system_reset_set_device we use
sbi_system_reset_add_device to reflect the actual meaning.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Generic mdelay() and udelay() functions can be provided by the
sbi_timer framework if timer frequency is available in the timer
instance provided by the platform support or timer driver.
This patch adds timer frequency (timer_freq) member in the
struct sbi_timer_device for above purpose.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We extend the ACLINT library to support separate base addresses
for MTIME and MTIMECMP registers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The ACLINT devices are backward compatible with SiFive CLINT
so we replace all CLINT library usage in various platforms
with ACLINT library. As a result of this replacement, the
CLINT library is not used by any part of OpenSBI hence we
remove it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Instead of having system_reset_check() and system_reset() callbacks
in platform operations, it will be much simpler for reset driver to
directly register these operations as a device to the sbi_system
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having ipi_send() and ipi_clear() callbacks in
platform operations, it will be much simpler for ipi driver
to directly register these operations as a device to sbi_ipi
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having timer_value(), timer_event_start(), and
timer_event_stop() callbacks in platform operations, it will
be much simpler for timer driver to directly register these
operations as device to the sbi_timer implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Instead of having console_putc() and console_getc() callbacks in
platform operations, it will be much simpler for console driver to
directly register these operations as device to the sbi_console
implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Implement rebooting the K210 via the system reset extension.
All reset types are treated in the same way.
A request for shutdown results in a reboot.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Few platforms have dummy system reset functions so let's remove
these dummy system reset functions to allow generic code deal
with it in the right way.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When passing the device tree to the next stage we should apply necessary
device tree fix-ups first. These include:
* fix up the CPU node in the device tree
* fix up the PLIC node in the device tree
* fix up the reserved memory node in the device tree
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We update kendryte/k210 to use new mechanism of having builtin DTB
where we convert k210.dts to C source and further compile-n-link it
with libplatsbi.a.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend CLINT cold init function to have a "struct clint_data *"
parameter pointing to CLINT details. This allows platforms to use
CLINT functions for multiple CLINT instances.
When multiple CLINTs are present, the platform can also provide
one of the CLINT as reference CLINT for other CLINTs. This will
help CLINTs to sync their time value with reference CLINT using
a time_delta computed in warm init function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend all PLIC functions to have a "struct plic_data *"
parameter pointing to PLIC details. This allows platforms to
use these functions for multiple PLIC instances.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The "target_hart" and "hart_count" parameters of PLIC cold and
warm init functions are only used for sanity checks and not
required in PLIC initialization.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can achieve shutdown, cold reboot, and warm reboot using just
one sbi_platform callback so we combine system_reboot() and
system_shutdown() callbacks into one system_reset() callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Adjust the order of include header files in alphabetical order in
platform codes. Also remove unnecessary inclusions.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
As of today all platforms use 8KB of per-HART stack hence there is
no need for each platform to define its own macro or use the magic
number. Create one macro for all platforms. Platform still can use
its own version if needed.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The sbi_current_hartid() being a regular function is quite
expensive because for callers it is a function call instead
of a direct CSR read. This patch converts sbi_current_hartid()
into a macro in riscv_asm.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The disabled_hard_mask in sbi_platform is only 64bits wide so we
cannot disable a HART with HARTID > 63. To tackle this, we remove
disabled_hart_mask and replace it with hart_disabled() platform
callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
It is possible to have a CLINT implementation which supports
only 32bit MMIO accesses on RV64 system so this patch extends
our CLINT driver such that platform code can specify whether
CLINT supports 64bit MMIO access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra<atish.patra@wdc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Directly implement frequency discovery, making the sysctl code
unnecessary. While at it, Move all macro definitions from platform.c
into platform.h and cleanup that file, removing the need for the
Apache 2.0 license and Canaan Inc copyright.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The Kendryte K210 UARTHS is compatible with SiFive UART. So use the
sifive uart driver and remove the k210 uarths platform code.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
OpenSBI manages outstanding TLB flush requests by queueing
them in a fifo synchronously. An ipi sync which uses an
atomic operation on MMIO address is no longer required.
Remove the ipi sync method from platform header and all usage.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Add version control of sbi_platform structure
- Add opensbi_version, this gives information of opensbi revision on
which the sbi_platform table was created.
- Add platform_version field in sbi_platform structure for platform
level version control.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
Move platform opensbi functions to sbi_platform_operations structure.
Both sbi_platform and sbi_platform_operations structures are maintained
by platform vendors.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
Currently, platform/common contains platform/non-platform specific
common minimal drivers and libraries. This is helpful is all platforms
are built within opensbi framework.
Move them to lib/utils so that any external platform code also can
reuse the minimalistic drivers or other common libraries.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <olof@lixom.net>
As per the current SBI specification, sbi_getc should return
an int instead of char.
In case of FIFO is empty, return -1 as per the specification.
Reported-by: Sergi Granell <xerpi.g.12@gmail.com>
Suggested-by:Thadeu Lima de Souza Cascardo <cascardo@cascardo.eti.br>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <anup.patel@wdc.com>
For better naming, we rename ipi_inject() to ipi_send() in
struct sbi_platform. We also replace term "inject" with
"send" in all related places.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
It is not necessary that platform has MMIO-based timer value
register. It can also have some custom (implementation specific)
CSR for timer value.
This patch renames SBI_PLATFORM_HAS_MMIO_TIMER_VALUE to
SBI_PLATFORM_HAS_TIMER_VALUE to imply "platform timer value"
instead of "mmio timer value".
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The target_hart and hartid paramter of TIMER callbacks is not
required because it always current hartid which can be obtained
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The hartid parameter in IRQCHIP callbacks of sbi_platform
is not required because current hartid can be determined
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The source_hart and hartid parameter is really not required in
IPI callbacks of sbi_platform because current hartid can always
be obtained by calling sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Instead of having separate timer_init() hooks for cold and
warm boot, this patch updates struct sbi_platform to have just
one timer_init() hook. The type of boot (cold or warm) is now
a boolean flag parameter for the updated timer_init() hook.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Instead of having separate ipi_init() hooks for cold and warm boot,
this patch updates struct sbi_platform to have just one ipi_init()
hook. The type of boot (cold or warm) is now a boolean flag parameter
for the updated ipi_init() hook.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Instead of having separate irqchip_init() hooks for cold and
warm boot, this patch updates struct sbi_platform to have just
one irqchip_init() hook. The type of boot (cold or warm) is now
a boolean flag parameter for the updated irqchip_init() hook.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
