Commit Graph
9 Commits
Author SHA1 Message Date
Sebastian Alba Vives 663786edae lib: sbi_trap_v_ldst: fix mask buffer overflow on VLEN > 128
mask_len counts mask bits: it is derived from vlenb * 8, and the mask
indexing below divides by 8 to turn a bit index into a byte index.
get_vreg() counts bytes: its size argument feeds "vsetvli x0, %0, e8,
m8" and a vse8.v, both of which operate on 8-bit elements.

Both emulators pass mask_len directly as get_vreg()'s size, so the
firmware writes eight times more than intended into mask[], a
MASK_BUFFLEN / 8 == 128 byte stack buffer. The write stays in bounds
only while vlenb * 8 <= 128, that is VLEN <= 128. Above that it runs
past the end of the buffer and corrupts the M-mode stack, including the
saved return address.

The pre-rework code passed vlenb, a byte count, which was correct; the
chunked version replaced it with a bit count.

Reachable from S-mode or U-mode with a single masked, misaligned vector
load or store on a hart whose VLEN exceeds 128 bits. Observed on
qemu-system-riscv64 with -cpu rv64,v=true,vlen=256,zicclsm=false: the
firmware takes an instruction access fault in M-mode with mepc and ra
both zero. The same payload at vlen=128 enters the emulator and
completes normally.

Convert pos and size to bytes at both call sites. mask_len is a power of
two and at least 8, and pos is already a multiple of mask_len, so both
divisions are exact.

Fixes: a8be5e94 ("lib: sbi: Rework misaligned vector load/store")
Signed-off-by: Sebastian Alba Vives <sebasjosue84@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260922030633.10886-1-sebasjosue84@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
2026-10-25 14:01:44 +05:30
Bo Gan a8be5e9478 lib: sbi: Rework misaligned vector load/store
Fix the following issues with misaligned vector load/store:

a. Stack overflow: the mask[VLEN_MAX / 8] variable consumes 8K stack
space, given VLEN_MAX=65536, overflowing the default-sized stack.
There's no need to fetch the whole mask in one go, instead, make it
on-demand. Use a 128-byte mask as local buffer to hold the sliding
window of mask. For rvv load, this is allowed -- from the spec:

  "The destination vector register group for a masked vector
   instruction cannot overlap the source mask register (v0),
   unless the destination vector register is being written with
   a mask value (e.g., compares) or the scalar result of a reduction"

We don't need to worry about the mask getting overwritten.

b. Maintain the value of vstart upon abort (uptrap) to avoid duplicate
work. After fault resolution, the instruction can restart from the
faulting vstart. For Fault-Only-First loads, reset vstart to 0, as
previously done so, to conform to spec.

c. Explicitly set VS dirty in VSSTATUS with SET_VS_DIRTY() if faulting
from V=1, and if any vector register, including vstart/vl/vtype, gets
changed in the handler. It can add 1 unnecessary op to set VS dirty
in M/SSTATUS (not VSSTATUS), where the HW already did, but for code
simplicity, do it anyway. The overhead should be negligible.

Signed-off-by: Bo Gan <ganboing@gmail.com>
Tested-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260609060024.706-5-ganboing@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
2026-06-17 11:43:38 +05:30
Bo Gan 914aeddaf1 lib: sbi: Add variable-length unprivilege access functions
sbi_load/store_loop read/write variable-length buffer unprivileged.
Both function use the widest aligned 8/4/2/1 byte load/stores in each
loop to reduce the total number of iterations.

Also switch the scalar/vector misaligned handlers to make use of such
functions to simplify code.

Miscellaneous: remove the unnecessary [taddr] in inline assembly

Signed-off-by: Bo Gan <ganboing@gmail.com>
Tested-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260609060024.706-4-ganboing@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
2026-06-17 11:41:11 +05:30
Bo Gan 1475f147f6 lib: sbi: Rework and split sbi_misaligned(_v)_tinst_fixup
The load/store address offset between the uptrap and the orig_trap
can be derived by orig_trap->tval - uptrap->tval, thus refactor
the function prototype for simplicity.

For vector load, sbi_misaligned_v_tinst_fixup is introduced. There's
no transformed instruction for vector load/store, so null out tinst
if the fault is not a guest-page fault.

Signed-off-by: Bo Gan <ganboing@gmail.com>
Tested-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260609060024.706-3-ganboing@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
2026-06-17 11:37:19 +05:30
Bo Gan 4120e6dce2 lib: sbi: cosmetic changes to reduce indentation
In preparation for subsequent patches.

Signed-off-by: Bo Gan <ganboing@gmail.com>
Tested-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260609060024.706-2-ganboing@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
2026-06-17 11:23:05 +05:30
Bo Gan eba121b459 lib: sbi: Do not override emulator callback for vector load/store
It's wrong to override the emulator callback in sbi_trap_emulate_load/
store. The function must respect the callback function passed in the
parameter. Hence, let the misaligned emulator callback decide when to
use sbi_misaligned_v_ld/st_emulator. To clean up things, also make the
following changes:

- Add the `insn` parameter to the callback. The trapping insn has been
  fetched by the caller already, whether transformed or directly loaded,
  thus saving the trouble in the callback. Note that you must not rely
  on the length of the `insn`, as it can be a transformed one from tinst

- Also the `tcntx` is added, providing the callback with register values
  to handle vector insn or other customized insns.

- Clarify that the read/write length (rlen/wlen) can be 0, in which
  case it could be a vector load/store or some customized instruction.
  The callback is responsible to handle it accordingly.

Also fixed issues in the sbi_misaligned_v_ld/st_emulator:
a. Redirect the trap when OPENSBI_CC_SUPPORT_VECTOR is not available.
b. Ensure the return code is >0 when no faults are redirected.

Fixes: c2acc5e5b0 ("lib: sbi_misaligned_ldst: Add handling of vector load/store")
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Link: https://lore.kernel.org/r/20260605113214.242-6-ganboing@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
2026-06-16 13:25:27 +05:30
Michael Ellerman 1157eb37e2 lib: sbi_trap_v_ldst: Redirect unhandled traps
When SBI is built with a compiler that doesn't support vector, the
misaligned vector load/store emulation is not built in, the handlers are
just stubs.

Currently the stubs just return 0, causing sbi_trap_emulate_load() to
return without incrementing mepc, meaning the instruction will just
fault again, an infinite loop.

Fix the stubs to use sbi_trap_redirect(), which forwards the trap to the
previous mode, allowing it to be handled there.

Fixes: c2acc5e5 ("lib: sbi_misaligned_ldst: Add handling of vector load/store")
Signed-off-by: Michael Ellerman <mpe@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260530-trap-redirect-v1-1-45d4d333d8c9@kernel.org
Signed-off-by: Anup Patel <anup@brainfault.org>
2026-06-15 10:21:03 +05:30
Anup Patel 5545602f77 Makefile: Don't enable V-extension using -march option
Enabling V-extension using -march option causes OpenSBI boot-time
hang with LLVM compiler.

As a work-around, don't enable V-extension using -march option and
instead use a custom OpenSBI specific define inform availability of
V-extension to lib/sbi/sbi_trap_v_ldst.c.

Fixes: c2acc5e5b0 ("lib: sbi_misaligned_ldst: Add handling of vector load/store")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
2024-12-15 11:30:48 +05:30
Nylon Chen c2acc5e5b0 lib: sbi_misaligned_ldst: Add handling of vector load/store
Add misaligned load/store handling for the vector extension
to the sbi_misaligned_ldst library.

This implementation is inspired from the misaligned_vec_ldst
implementation in the riscv-pk project.

Co-developed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
2024-12-06 17:43:06 +05:30