This patch extends fw_base to relocate to link address whenever
firmware load address is not equal to link address.
The relocation will not work when load start to load end overlap
link start to link end.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
This patch extends existing firmwares (i.e. fw_jump and fw_payload)
to explicitly provide next mode and options to fw_base.
We also introduce fw_save_info() which is called by fw_base very
early on boot HART. This function can be used by existing firmwares
(i.e. fw_jump and fw_payload) to save information passed by previous
booting stage.
Overall, this is a preparatory patch for implementing fw_dynamic.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When I tried to start opensbi with coreboot, I found that aligning to a 16-byte
boundary would make a copy error.
Corrected to align to an machine word length boundary.
Signed-off-by: Xiang Wang <wxjstz@126.com>
Introduce "options" in "struct sbi_scratch" and firmware can update
it based on optional compile time flags before calling sbi_init().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Scratch space setup needs to be done once for reboot for each
hart. _start_warm may be called several times if hart hotplug
is implemented.
Move scratch space setup to the beginning so that it is done
only once.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Create a sbi_ipi_data structure that holds unpacked IPI information. At
the same time remove ipi_type from the sbi_scratch struct and use a
fixed offset to access it.
This structure fits in behind the sbi_scratch structure.
This fixes https://github.com/riscv/opensbi/issues/81
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A warm reset using reset button may put icache and registers
in non-coherent state.
Flush the icache and reset all registers for every hart.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
All the non-boot harts run in a tight loop which may cause a heavy load
on the memory bus. This may delay the boot hart to complete the cold boot
process.
Introduce few nop that will ease up the traffic.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
A warm reset by pressing the reset button may not initialize all the
registers to zero. Do it for every hart during warm boot.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Multi-core communication via memory requires the addition of a barrier
instructions to ensure cache coherency.
Signed-off-by: Xiang Wang <wxjstz@126.com>
This patch extends our low-level trap handler in fw_base.S for
handling M-mode to M-mode traps without overwritting stack.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Some older toolchains may not have all the csr's defined. Update all
the csr functions to use the CSR_ #define values instead of the
toolchain defined values.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The secondary hart waits for an IPI signal from the boot hart to
executing boot code (hot boot). As a result, software generated
interrupts have to be enabled for secondary harts before waiting for
the boot hart boot completion IPI signal.
Enabling software generated interrupts (IPI) can be done independently
of the firmware code and moved to libsbi code so that the different
firmware do not have to implement this.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The tmp0 member was added in struct sbi_scratch to assist
register save/restore at time of trap handling. This tmp0
is not unsed any more hence removing it.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The struct sbi_trap_regs related defines RISCV_TRAP_REGS_xyz should
be in sbi_trap.h so that we can keep these defines in-sync with changes
in struct sbi_trap_regs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The struct sbi_platform related defines RISCV_PLATFORM_xyz should
be in sbi_platform.h so that we can keep these defines in-sync
with changes in struct sbi_platform.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The struct sbi_scratch related defines RISCV_SCRATCH_xyz should
be in sbi_scratch.h so that we can keep these defines in-sync
with changes in struct sbi_scratch.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The fw_common.S is the base firmware extendend by fw_jump and
fw_payload. This patch renames fw_common.S to fw_base.S to
have more clear/intutive name for base firmware.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
