The Sophgo CV18XX/SG200X series SoCs have a standard C906
core. Add support for it.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the sbi_sse_exit() gets event in a loop but does not put
it back after use. This results in global events remaining locked
causing hangs on sub-sequent calls to sse_event_get() for global
events.
Fixes: c8cdf01d8f ("lib: sbi: Add support for Supervisor Software Events extension")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
SG2042 uses an onboard MCU to provide reset function.
Add reset driver to support this onboard MCU.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The inline function can simplify the code by setting some call
restrictions. This ensures logical smoothness
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Modify the return value of the sbi_dbtr_shmem_disabled function to
bool to make the semantics clearer.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The previous code detected shmem_phys_hi and shmem_phys_lo as two
addresses. fix this bug
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Obtaining a 64-bit address under rv64 does not require combining
32-bit registers
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
After getting hart_shmem_base, dbtr_thishart_state_ptr cannot be
empty. So remove check code.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
When only phys_hi is equal to SBI_DBTR_SHMEM_INVALID_ADDR, it may be
a legal address. The old code would modify the legal address.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
As Guo Ren said from the kernel mailing list [1], future T-Head CPUs,
including the newer versions of T-Head C908, will feature standard
Sscofpmf extension. For these CPUs, T-Head's implementation of PMU
Overflow Interrupts may not needed anymore. In this case, we shouldn't
apply T-Head PMU for all T-Head CPUs. Thus, this patch separated T-Head PMU
errata.
[1] https://lore.kernel.org/linux-riscv/Zh9sUUUT09LZb0MO@gmail.com/
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
To make the framework suit all Andes CPUs, change all occurrences of
andes45 to andes.
In addition, we fix some coding style problems and remove an unused
macro in andes.h.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add spinlock protection to avoid race condition on assigned_harts
during domain context switching. Also, rename/add variables for
accessing the corresponding domain of target/current context.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Although Mstatus.MPV is set, before executing mret, access to VS mode
registers should use the actual register addresses, not the pseudonyms
of S registers.
Signed-off-by: Pope B.Lei <popeblei@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When registering an SSE event, check for the handler_entry_pc to belong
to supervisor mode domain using sbi_domain_check_addr_range().
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Rather then passing 1 to sbi_domain_check_addr_range() for supervisor
mode, use PRV_S.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Move the enable callback call before sending the IPI. Even though the
event is locked and no race condition can happen, this is more logical.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The list loop below that check is actually not looping if the list is
empty so there was no need for this check.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Rather than checking 32bits overflow with some absolute value, check the
value to be different from the cast itself.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
There was a naming incoherency between enabled events list lock/unlock.
Rename sse_hart_unlock() to sse_enabled_event_unlock() to be coherent
and reword comments above lock()/unlock() functions.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Implement the test which covers some of the functions from the
`riscv_locks.h` file. This test consists of 3 test cases:
1) For lock/unlock functions
2) Unsuccessful trylock (the lock was previously taken)
3) Successful trylock (the lock is free and can be taken)
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Implement the test which covers some of the functions from the
`riscv_atomic.h` header file. The test contains 9 test cases:
1) atomic read/write test
2) add/return test
3) sub/return test
4) cmpxchg test
5) atomic_xchg test
6) atomic_raw_set_bit test
7) atomic_raw_clear_bit test
8) atomic_set_bit test
9) atomic_clear_bit test
Some of the test cases operate on the `test_atomic` variable. It gets
initialized in the suite init function.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Allow to define an init function for the test suite. It could help us
to initialize global variable once, and use them in multiple test cases
after the initialization.
For instance, if multiple test cases use the same atomic_t var, it
could be helpful to call ATOMIC_INIT once during the suite
initialization.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now opensbi can run at any address via dynamic relocation. We can
remove FW_TEXT_START.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
After calling fdt_node_offset_by_compatible() we must check its return
value and not an unrelated value.
Addresses-Coverity-ID: 1584993 Logically dead code
Fixes: 67ce5a763c ("platform: generic: Add support for specify coldboot harts in DT")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sse_event_get() may return NULL. We should not dereference the return value
in sbi_sse_exit() without checking.
Fixes: c8cdf01d8f ("lib: sbi: Add support for Supervisor Software Events extension")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_hart_ext[] array is missing these two extensions ids. It is
expected that this array contains all the extensions declaration at the
same index of the SBI_HART_EXT_* define. Without this, when adding a new
extension, there is a mismatch between ids and extension names and it
can even display corrupted extension names.
Addresses-Coverity-ID: 1584994 Out-of-bounds read
Fixes: 6bb6b61c27 ("lib: sbi: Add support for smcsrind and smcdeleg")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The rule included from auto.conf.cmd adds a dependency on every Kconfig
file, so these two Kconfig files do not need to be specified again here.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
The .config file may be manually edited or copied from another location.
Since genconfig.py is responsible for generating auto.conf (the Makefile
fragment) and autoconf.h (the C header) from .config, it must be run any
time .config changes, not just when running menuconfig.
Fixes: 662e631cce ("Makefile: Add initial kconfig support for each platform")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
SCOUNTEREN and SENVCFG may not be supported on certain RISC-V core,
so check the existence of these CSRs via privilege spec version to
prevent illegal instructions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, all non-coldboot HARTs busy spin in wait_for_coldboot()
until the entire coldboot init sequence is completed.
This means:
1) On QEMU, all non-coldboot HARTs will eat host CPU time and
also slow down the coldboot HART until the entire coldboot
init sequence is completed.
2) On real HW, all non-coldboot HARTs will consume more CPU
power until the entire coldboot init sequence is completed.
To address this, wake up all non-coldboot HARTs as early as
possible in the coldboot init sequence.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
On QEMU virt machine with large number of HARTs, some of the HARTs
randomly fail to come out of wait_for_coldboot() due to one of the
following race-conditions:
1) Failing HARTs are not able to acquire the coldboot_lock and
update the coldboot_hartmask in wait_for_coldboot() before
the coldboot HART acquires the coldboot_lock and sends IPI
in wake_coldboot_harts() hence the failing HARTs never
receive IPI from the coldboot HART.
2) Failing HARTs acquire the coldbood_lock and update the
coldboot_hartmask before coldboot HART does sbi_scratch_init()
so the sbi_hartmask_set_hartid() does not update the
coldboot_hartmask on the failing HARTs hence they never
receive IPI from the coldboot HART.
To address this, use a simple busy-loop in wait_for_coldboot() for
polling on coldboot_done flag.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The address of the local scratch area is stored in each hart's mscratch
CSR. It is more efficient to read the CSR than to compute the address
from the hart ID.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The address of the local scratch area is stored in each hart's mscratch
CSR. It is more efficient to read the CSR than to compute the address
from the hart ID.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Avoid using C types and casts if sbi/sbi_byteorder.h is included in
assembly code
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add SSE callbacks registration to PMU driver in order to disable
interrupt delegation for PMU interrupts. When interrupts are
undelegated send the PMU SSE event upon LCOFIP IRQ.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The SBI SSE extension defines a set of function that can be called to
register and handle supervisor sofwtare events. This patch implements
all of the functionality defined in the specification.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This extension [1] allows to deliver events from SBI to supervisor via
a software mechanism. This extension defines events (either local or
global) which are signaled by the SBI on specific signal sources (IRQ,
exceptions, etc) and are injected to be executed in supervisor mode.
[1] https://lists.riscv.org/g/tech-prs/message/798
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
All T-Head CSRs are already defined in thead/c9xx_encoding.h.
Let's reuse the values from there instead of redefining them with
a slightly different name.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Anup Patel <anup@brainfault.org>
We should store test object files list in the `libsbi-objs-y` Makefile
variable, not in `libsbitests-objs-y`. Update the documentation
correspondingly.
Since we don't use the `console_dev` static variable directly in the
`sbi_console_test` unit test anymore, remove the paragraph which says
that we do.
Fixes: 86224ec36a ("docs/writing_tests: Update tests paths")
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_trap_error() should dump state of all in-flight traps upon
failure in a nested trap so extend it accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
The struct sbi_trap_context already has the information needed by
sbi_illegal_insn_handler() so directly pass struct sbi_trap_context
pointer to this function.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
The struct sbi_trap_context already has the information needed by
misaligned load/store and access fault load/store handlers so directly
pass struct sbi_trap_context pointer to these functions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Club the struct sbi_trap_regs and struct sbi_trap_info a new
struct sbi_trap_context (aka trap context) which must be saved
by low-level trap handler before calling sbi_trap_handler().
To track nested traps, the struct sbi_scratch points to the current
trap context and the trap context has pointer to pervious context
of previous trap.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
