Add parent_unique_id fields to struct aplic_data for
IMSIC parent linking in MSI mode. Store parent IMSIC unique_id
during FDT parsing of the APLIC node.
Add aplic_is_msi_mode() complementing aplic_is_direct_mode() to
consolidate delivery mode detection. Add APLIC_TARGET_EIID() macro
for packing the EIID field into the TARGET register.
Add parent_unique_id and parent_irq_map fields to struct aplic_data.
parent_unique_id identifies the upstream IMSIC irqchip device resolved
via sbi_irqchip_find_device() during hwirq_setup. parent_irq_map is
a per-source array allocated at cold init time to track the EIID
assigned by the IMSIC for each APLIC source.
Restore aplic_writel_msicfg() and re-introduce MSI address register
programming in aplic_init(), gated on aplic_is_msi_mode(). Set the
DOMAINCFG_DM bit to switch the hardware to MSI delivery mode when
no IDC structures are present.
Add aplic_program_msi_target() to pack hart_index, guest_index, and
EIID into the APLIC_TARGET register. Add aplic_write_msi() as the
sbi_irqchip write_msi callback that extracts EIID and hart_index from
the MSI message and calls aplic_program_msi_target(). Add
aplic_msi_callback() as the MSI receive callback that dispatches to
sbi_irqchip_process_hwirq() on the APLIC chip.
Extend aplic_hwirq_setup() with an MSI path that resolves the parent
IMSIC chip by parent_unique_id, registers an MSI route via
sbi_irqchip_register_msi(), and stores the allocated EIID in
parent_irq_map for the source being configured.
Extend aplic_hwirq_set_affinity() with an MSI path that delegates
affinity reprogramming to the parent IMSIC chip via
sbi_irqchip_set_affinity() using the stored parent_irq_map entry.
Guard warm_init, process_hwirqs, and hwirq_eoi with early returns in
MSI mode as interrupt delivery and acknowledgement are handled by the
IMSIC in that configuration.
Signed-off-by: Oza Pawandeep <pawandeep.oza@oss.qualcomm.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260721214833.687361-3-pawandeep.oza@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Instead of parsing ISA extensions separately for each hart in the
generic_extensions_init() function, it is better to parse ISA extensions
for all available harts in the cold boot path. Also, this allows us
to remove fdt_isa_bitmap from scratch space and directly initialize
"extensions" in struct sbi_hart_features for each hart.
Signed-off-by: Anup Patel <anup.patel@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260521082625.1520870-3-anup.patel@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add rpmi_event_notification_state enum with disable, enable, and return
current state IDs. Also, add req_state field to rpmi_enable_notification_req
and current_state field to rpmi_enable_notification_resp for RPMI specification
compliance.
Add notification event ID enum and data structures for RPMI Performance
service group events: power change, limit change, and level change.
Signed-off-by: David E. Garcia Porras <david.garcia@aheadcomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260608125257.3220114-4-anup.patel@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add bit-field defines for the RPMI performance domain attributes flags
and fast-channel attributes flags as specified in the RPMI specification.
These are needed by platform implementations that provide RPMI
performance services (e.g. DVFS controllers).
Also add the missing db_write_value field to
rpmi_perf_get_fast_chn_attr_resp to match the RPMI spec layout.
Signed-off-by: David E. Garcia Porras <david.garcia@aheadcomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260328054347.3706029-5-david.garcia@aheadcomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Implement a system-wide suspend driver for the Andes AE350 platform.
This driver supports Andes-specific deep sleep (suspend to RAM) and
light sleep (suspend to standby) functionalities via the ATCSMU.
The major differences between deep sleep and light sleep are:
- Power Domain and Resume Path: Deep sleep powers down the core domain.
Consequently, harts waking from deep sleep resume from the reset
vector. Light sleep utilizes clock gating to the core domain; harts
maintain state and resume execution at the instruction immediately
following the WFI instruction.
- Primary Hart Wakeup: In both modes, the primary hart is woken by
UART or RTC alarm interrupts. In deep sleep, the primary hart is
additionally responsible for re-enabling the Last Level Cache (LLC)
and restoring Andes-specific CSRs.
- Secondary Hart Wakeup: In light sleep, secondary harts are woken
by an IPI sent from the primary hart. In deep sleep, they are
woken by an ATCSMU hardware wake-up command. Furthermore,
secondary harts must restore Andes-specific CSRs when returning
from deep sleep.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Link: https://lore.kernel.org/r/20251229071914.1451587-6-ben717@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Refactor ATCSMU (System Management Unit) support by moving it from a
system utility into a dedicated FDT-based HSM driver.
Key changes include:
- Moving the functions in lib/utils/sys/atcsmu.c into the new HSM driver
- Moving hart start and stop operations on AE350 platform into the new
HSM driver
- Converting the assembly-based functions in sleep.S to C code for the
readability
- Updating the ATCWDT200 driver
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Link: https://lore.kernel.org/r/20251229071914.1451587-2-ben717@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Previously we assume only 1 UART8250 instance can be used. Now we support
multiple instances by introducing counterpart functions to putc/getc/init
which take an extra *dev parameter, and name them as uart8250_device_xyz()
The original functions without the *dev parameter will operate on the
default instance exactly the same as before, so no changes on the caller
is required.
Note: uart8250_device_init only does device initialization without the
console registration logic.
Signed-off-by: Bo Gan <ganboing@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251218104243.562667-7-ganboing@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The SiFive SMC0 controls the clock and power domain of the core complex
on the SiFive platform. The core complex enters the low power state
after the secondary cores enter the tile power gating and last core
execute the `CEASE` instruction with the corresponding SMC0
configurations. The devices that inside both tile power domain and core
complex power domain will be off, including caches and timer. Therefore
we need to flush the last level cache before entering the core complex
power gating and update the timer after waking up.
Reviewed-by: Cyan Yang <cyan.yang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Link: https://lore.kernel.org/r/20251020-cache-upstream-v7-12-69a132447d8a@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
It seems that current implementation doesn't fail on fdt_mpxy_init(),
because platforms might not have any MPXY devices. In fact, if there are
no MPXY devices, fdt_driver_init_all() will return SBI_OK.
More importantly, if there is any MPXY device which fails the
initialization, OpenSBI must check the error code and stop the booting.
Thus, this commit adds the return value for fdt_mpxy_init().
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250430091007.3768180-1-alvinga@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The P2A doorbell system MSI index is expected to be discovered from
device tree instead of RPMI system MSI service group attribute. This
is based on ARC feedback before RPMI spec was frozen.
Let's parse P2A doorbell system MSI index from device tree and also
expose it as rpmi channel attribute to RPMI client drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20250512083827.804151-3-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
This reduces .bss size by 8 KiB, and should reduce overall memory usage
since most platforms will have significantly fewer than 512 entries in
this table. At the same time, it removes the fixed table size limit.
Since the table is only used within fdt_pmu.c, instead of updating the
extern declaration, make the table local to this file.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The supervisor software can directly receive most of the system MSIs
except P2A doorbell and MSIs preferred to be handled in M-mode.
Add MPXY RPMI mailbox client driver for the System MSI service group.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The service group ID assignment and some of the BASE services have
changes in the latest RPMI specification so let's update the RPMI
implementation accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Use the RPMI mailbox channel attributes to populate MPXY channel
attributes instead of hard coding them.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
To allow clients query service group version of a RPMI mailbox channel,
implement get_attribute() callback for the RPMI shared memory mailbox
controller.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The rpmi_mailbox.h uses structures defined in mailbox.h so let's
include mailbox.h in rpmi_mailbox.h header.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Currently, the common MPXY RPMI mailbox client does not support
notifications so no need for dummy notifications support.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Some of the RPMI service groups may need additional context and
special handling when transferring messages via underlying mailbox
channel so introduce optional MPXY RPMI service group operations
for this purpose.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Instead of having one common FDT MPXY RPMI mailbox client drivers
for various RPMI service groups, split this driver into two parts:
1) Common MPXY RPMI mailbox client library
2) MPXY driver for RPMI clock service group
The above split enables having a separate MPXY driver for each
RPMI clock service group and #1 (above) will allow code sharing
between various MPXY RPMI drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
For driver subsystems that are not tightly integrated into the OpenSBI
init sequence, it is not important that the drivers are initialized in
any particular order. By putting all of these drivers in one array, they
can all be initialized with a single pass through the devicetree. This
saves about 10 ms of boot time on HiFive Unmatched.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that all drivers are using the fdt_driver functions for
initialization, this function is unused and can be removed.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The irqchip driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_irqchip_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the same irqchip instance is registered for multiple PLIC
and APLIC instances which causes the sbi_list_for_each_entry() loop
in the sbi_irqchip_init() to hang at boot-time.
To address the above issue, register a separate irqchip instance for
each PLIC and APLIC instance.
Fixes: 2dd6eaf680 ("lib: sbi_irqchip: Call driver warm_init from SBI core")
Reported-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
