According to the Device Tree Spec, Chapter 2.3.8 "ranges" [1]:
The parent address size will be determined from the #address-cells
property of the node that defines the parent’s address space.
In fdt_translate_address(), which considered the parent address size
is the child address size, this commit fix the two address sizes
and parsing the address independently.
Signed-off-by: Max Hsu <max.hsu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250711-dev-maxh-master_fdt_helper-v2-1-9579e1f02ee1@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
This code has nothing to do with the ISA's registers, it's about the
format of ELF relocations. As such, __SIZEOF_LONG__, being a language /
ABI-level property, is a more appropriate constant to use. This also
makes it easier to support CHERI, where general-purpose registers are
extended to be capabilities, not just integers, and so the register size
is not the same as the machine word size. This also happens to make it
more correct for RV64ILP32, where the registers are 64-bit integers but
the ABI is 32-bit (both for long and for the ELF format), though
properly supporting that ABI is not part of the motivation here, just a
consequence of improving the code for CHERI.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250709232932.37622-2-jrtc27@jrtc27.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Rather than hand-rolling scaled pointer arithmetic with casts and
shifts, let the compiler do so by indexing an array of GPRs, taking
advantage of the language's type system to scale based on whatever type
the register happens to be. This makes it easier to support CHERI where
the registers are capabilities, not plain integers, and so this pointer
arithmetic would need to change (and currently REGBYTES is both the size
of a register and the size of an integer word upstream).
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250709232932.37622-1-jrtc27@jrtc27.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The plic_data struct was uninitialized. This led to misfunction behavior
since it was subsequently assigned to the global plic struct, and some
struct fields, such as flags and irqchip, contained random values.
The fix proposes to initialize the plic_data to the global plic struct,
so, after parsing the fdt, the fields of the struct will be set to the
default values set in global plic struct definition, or the parsed values
in the fdt, or zero.
Fixes: 4c37451 ("platform: openpiton: Read the device configurations from device tree")
Signed-off-by: Manuel Hernández Méndez <maherme.dev@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250708180914.1131-1-maherme.dev@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Since this persists in the preprocessed output (so that it can affect
the subsequent compilation), it ends up in the input to dtc and is a
syntax error, breaking the k210 build. Ideally we wouldn't add the
-include flag to DTSCPPFLAGS in the first place as this header is wholly
pointless there, but that's a more invasive build system change compared
to just making this header safe to include there.
Fixes: 86c01a73ff ("lib: sbi: Avoid GOT indirection for global symbol references")
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Xiang W <wxjstz@126.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Link: https://lore.kernel.org/r/20250709232840.37551-1-jrtc27@jrtc27.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The BSWAPxx() macros are now throwing the following warnings with
newer gcc versions. This is due to throwing an argument in that may
be evaluated more than one (I think) and therefore things like the
example below should be avoided.
Fix by making a set of BSWAPxx() wrappers which specifically only
evaluate 'x' once.
In file included lib/sbi/sbi_mpxy.c:21:
lib/sbi/sbi_mpxy.c: In function ‘sbi_mpxy_write_attrs’:
ib/sbi/sbi_mpxy.c:632:63: error: operation on ‘mem_idx’ may be undefined [-Werror=sequence-point]
632 | attr_val = le32_to_cpu(mem_ptr[mem_idx++]);
| ~~~~~~~^~
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Rahul Pathak <rahul@summations.net>
Reviewed-by: Xiang W <wxjstz@126.com>
Link: https://lore.kernel.org/r/20250704122938.897832-1-ben.dooks@codethink.co.uk
Signed-off-by: Anup Patel <anup@brainfault.org>
Add __stack_chk_fail() and __stack_chk_guard variable which are used by
compiler built-in stack protector.
This patch just try to support stack-protector so the value of the stack
guard variable is simply fixed for now. It could be improved by
deriving from a random number generator, such as Zkr extension or any
platform-specific random number sources.
Introduce three configurations for the stack protector:
1. CONFIG_STACK_PROTECTOR to enable the stack protector feature by
providing "-fstack-protector" compiler flag
2. CONFIG_STACK_PROTECTOR_STRONG to provide "-fstack-protector-strong"
3. CONFIG_STACK_PROTECTOR_ALL to provide "-fstack-protector-all"
Instead of fixing the compiler flag of stack-protector feature as
"-fstack-protector", we derive it from the introduced Kconfig
configurations. The compiler flag "stack-protector-cflags-y" is defined
as Makefile "immediately expanded variables" with ":=". Thus, the
stronger configuration of the stack protector can overwrite the
preceding one.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Yu-Chien Peter Lin <peter.lin@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250703151957.2545958-3-alvinga@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the fdt_parse_aclint_node() does not handle non-contiguous
hartid correctly and returns incorrect first_hartid and hart_count.
This is because the for-loop in fdt_parse_aclint_node() skips a hartid
for which hartindex is not available (aka corresponding CPU DT node
is disabled).
For example, on a platform with 4 HARTs (hartid 0, 1, 2, and 3) where
CPU DT nodes with hartid 0 and 2 are disabled, the fdt_parse_aclint_node()
returns first_hartid = 1 and hart_count = 3 which is incorrect.
To address the above issue, drop the sbi_hartid_to_hartindex() check
from the for-loop of fdt_parse_aclint_node().
Fixes: 5e90e54a1a ("lib: utils:Check that hartid is valid")
Reported-by: Maria Mbaye <MameMaria.Mbaye@microchip.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20250606055810.237441-1-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Using hsm stop in hsm wait loop causes secondary harts to be stuck
forever in OpenSBI on RISC-V platforms where HSM hart hotplug is
available and all harts come-up at the same time during system
power-on.
For example, lets say we have two harts A and B on a RISC-V platform
with HSM hart hotplug which come-up at the same time during system
power-on. The hart A enters OpenSBI before hart B hence it becomes
the primary (or cold-boot) hart whereas hart B becomes the secondary
(or warm-boot) hart. The hart A follows the OpenSBI cold-boot path
and registers hsm device before hart B enters OpenSBI. The hart B
eventually enters OpenSBI and follows the OpenSBI warm-boot path
so it will increment it's own entry_count before entering hsm wait
loop where it sees hsm device and stops itself. Later as part of
the Linux boot-up sequence, hart A issues SBI HSM start call to
bring-up hart B but OpenSBI sees entry_count != init_count for
hart B in sbi_hsm_hart_start() hence hsm_device_hart_start() is
not called for hart B resulting in hart B stuck forever in OpenSBI.
To fix the above issue, revert entry_count before doing hsm stop
in hsm wait loop.
Fixes: d844deadec ("lib: sbi: Use hsm stop for hsm wait")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Nick Hu <nick.hu@sifive.com>
Link: https://lore.kernel.org/r/20250527124821.2113467-1-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
OpenSBI only parses MSI information of the first next level subdomain
for now, which makes the root domain misconfigured in some case:
1. the msi is not enabled on the first subdomain of the root domain,
but other subdomains enable MSI.
2. the root domain is set as direct mode, but its subdomains enable MSI.
So it is needed to parse all child of the root domain, Otherwise, the
some non-root domains are broken. As the specification says, it is
safe to parse the MSI information of all its subdomain and write the
msiaddrcfg register of the non root domain as they are read only.
Parse the aplic MSI information recursively for all aplic device.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20250523085348.1690368-1-inochiama@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, when configuring a matching programmable HPM counter with
Sscofpmf being present, cidx_base > 2, and cidx_mask == 0 to monitor
either the CPU_CYCLES or INSTRUCTIONS hardware event,
sbi_pmu_ctr_cfg_match will succeed but it will configure the
corresponding fixed counter instead of the counter specified by the
cidx_base parameter.
During counter configuration, the following issues may arise:
- If the SKIP_MATCH flag is set, an out-of-bounds memory read of the
phs->active_events array would occur, which could lead to undefined
behavior.
- If the CLEAR_VALUE flag is set, the corresponding fixed counter will
be reset, which could be considered unexpected behavior.
- If the AUTO_START flag is set, pmu_ctr_start_hw will silently start
the fixed counter, even though it has already started. From the
supervisor's perspective, nothing has changed, which could be confusing.
The supervisor will not see the SBI_ERR_ALREADY_STARTED error code since
sbi_pmu_ctr_cfg_match does not return the error code of
pmu_ctr_start_hw.
The only way to detect these issues is to check the ctr_idx return value
of sbi_pmu_ctr_cfg_match and compare it with cidx_base.
Fix these issues by returning the SBI_ERR_INVALID_PARAM error code if
the cidx_mask parameter value being passed in is 0 since an invalid
parameter should not lead to a successful sbi_pmu_ctr_cfg_match but with
unexpected side effects.
Following a similar rationale, add the validation check to
sbi_pmu_ctr_start and sbi_pmu_ctr_stop as well since sbi_fls is
undefined when the mask is 0.
This also aligns OpenSBI's behavior with KVM's.
Signed-off-by: James Raphael Tiovalen <jamestiotio@gmail.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250520132533.30974-1-jamestiotio@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
OpenSBI is capable of emulating time CSR through an external timer
for HARTs that don't implement a full Zicntr extension. Let's add
Zicntr extension in the FDT if CSR emulation is active.
This avoids hardcoding the extension in the devicetree, which may
confuse pre-SBI bootloaders.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250516133352.36617-4-ziyao@disroot.org
Signed-off-by: Anup Patel <anup@brainfault.org>
Zicntr extension specifies three read-only CSRs, time, cycle and
instret. It isn't sufficient to report Zicntr is fully supported with
only time CSR detected.
This patch introduces a bitmap to sbi_hart_features to record
availability of these CSRs, which are detected using traps. Zicntr is
reported as present if and only if three CSRs are all available on the
HARTs.
Sites originally depending on SBI_HART_EXT_ZICNTR for detecting
existence of time CSR are switched to detect SBI_HART_CSR_TIME instead.
Suggested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250516133352.36617-3-ziyao@disroot.org
Signed-off-by: Anup Patel <anup@brainfault.org>
It seems that current implementation doesn't fail on fdt_mpxy_init(),
because platforms might not have any MPXY devices. In fact, if there are
no MPXY devices, fdt_driver_init_all() will return SBI_OK.
More importantly, if there is any MPXY device which fails the
initialization, OpenSBI must check the error code and stop the booting.
Thus, this commit adds the return value for fdt_mpxy_init().
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250430091007.3768180-1-alvinga@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The P2A doorbell system MSI index is expected to be discovered from
device tree instead of RPMI system MSI service group attribute. This
is based on ARC feedback before RPMI spec was frozen.
Let's parse P2A doorbell system MSI index from device tree and also
expose it as rpmi channel attribute to RPMI client drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20250512083827.804151-3-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
When OpenSBI is built with a relatively new compiler (gcc-13 and greater)
I observed that GDB is unable to produce proper backtraces and some
variable values appear corrupted (even if the associated DWARF
location descriptor is correct).
Turns out that to properly work with debug information, debuggers often
need to unwind the stack. They generally rely on Call Frame Information
(CFI) records provided by the compiler to facilitate this task.
Currently, the GCC compiler offers two mechanisms:
- `.debug_frame` section (as described in the DWARF specification).
- `.eh_frame` sections (as described in LSB documents).
The latter (`.eh_frame`) supports stack unwinding at runtime, providing
a framework for C++ exceptions or enabling backtrace generation using
libraries like libunwind. However, the downside of this approach is that
these sections should be part of loadable segments.
The former (`.debug_frame`) is simply an ordinary debug section.
Starting from GCC 13, Linux targets enable the `-fasynchronous-unwind-tables`
and `-funwind-tables` flags by default. Relevant commit:
https://github.com/gcc-mirror/gcc/commit/3cd08f7168
When these flags are active, the compiler generates `.eh_frame` sections
instead of `.debug_frame`. Since OpenSBI is built using the **Linux
toolchain**, this behavior applies to OpenSBI as well.
The problem arises because the SBI build system uses `-Wl,--gc-sections`,
which discards the `.eh_frame` section.
Possible Fixes:
1. Enforce `.debug_frame` generation – Modify compiler flags to generate
`.debug_frame` instead of `.eh_frame`.
2. Preserve `.eh_frame` in the linker script – Add `KEEP(*(.eh_frame))`
to ensure the section is not discarded.
I chose Option 1 because it avoids any runtime overhead.
Signed-off-by: Parshintsev Anatoly <anatoly.parshintsev@syntacore.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250421124729.36364-1-anatoly.parshintsev@syntacore.com
Signed-off-by: Anup Patel <anup@brainfault.org>
If we hotplug a core and then perform a suspend-to-RAM operation on a
multi-core platform, the hotplugged CPU may be woken up along with the rest
of the system, particularly on platforms that wake all cores from the
deepest sleep state. When this happens, the hotplugged CPU enters the
sbi_hsm_wait WFI wait loop instead of transitioning into a
platform-specific low-power state. To address this, we add a HSM stop call
within the wait loop. This allows platforms that support HSM stop to enter
a low-power state when the CPU is unexpectedly woken up.
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250418064506.15771-1-nick.hu@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Most CSRs are XLEN bits wide, but some are 64 bit, so rv32 needs two
accesses, plaguing the code with ifdefs.
Add new helpers that split 64 bit operation into two operations on rv32.
The helpers don't use "csr + 0x10", but append "H" at the end of the csr
name to get a compile-time error when accessing a non 64 bit register.
This has the downside that you have to use the name when accessing them.
e.g. csr_read64(0x1234) or csr_read64(CSR_SATP) won't compile and the
error messages you get for these bugs are not straightforward.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Link: https://lore.kernel.org/r/20250429142549.3673976-3-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
In current implementation, the length of hartindex_to_context_table[]
array is fixed as SBI_HARTMASK_MAX_BITS. However, the number of harts
supported by the platform might not be SBI_HARTMASK_MAX_BITS and is
usually smaller than SBI_HARTMASK_MAX_BITS. This means it is unnecessary
to allocate such fixed-length array here.
Precisely, current implementation always allocates 1024 bytes for
hartindex_to_context_table[128] on RV64 platform. However, a platform
supports two harts only needs hartindex_to_context_table[2], which only
needs 16 bytes.
This commit calculates needed size of hartindex_to_context_table[]
according to supported number of harts on the platform when registering
per-domain data, so that memory usage of per-domain context data can be
reduced.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250326062051.3763530-1-alvinga@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Switch all existing platform overrides to use the helper pattern instead
of the platform hooks. After this commit, only the .match_table and
.init members of struct platform_override are used.
There are two minor behavioral differences:
- For Allwinner D1, fdt_add_cpu_idle_states() is now called before the
body of generic_final_init(). This should have no functional impact.
- For StarFive JH7110, if the /chosen/starfive,boot-hart-id property is
missing, the code now falls back to using generic_coldboot_harts,
instead of accepting any hart.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250325234342.711447-7-samuel.holland@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently the generic platform follows the middleware pattern: it
implements the sbi_platform hooks, while providing its own set of hooks
for further customization. This has a few disadvantages: each location
where customization is needed requires a separate platform_override
hook, including places where the generic function does nothing except
forward to a platform_override hook, and the extra layer of function
pointers adds runtime overhead.
Let's restructure the generic platform to follow the helper pattern.
Allow platform overrides to treat the generic platform as a template,
adding or replacing the sbi_platform_operations as needed. Export the
generic implementations, so they can be called as helpers from inside
the override functions. With this pattern, the platform_override
function pointers are replaced by direct calls, and the forwarding
functions can be removed.
The forwarding functions are not exported, since there is no reason for
an override to call them. generic_vendor_ext_check() must be rewritten,
since now there is a new way to override vendor_ext_provider.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250325234342.711447-6-samuel.holland@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
OpenSBI supports multiple supervisor domains run on same platform. When
these supervisor domains want to communicate with OpenSBI through MPXY
channels, they will allocate MPXY shared memory from their own memory
regions. Therefore, the MPXY state data structure must be per-domain and
per-hart data structure.
This commit registers per-domain MPXY state data in sbi_mpxy_init(). The
original MPXY state allocated in scratch region is also removed. We also
replace sbi_scratch_thishart_offset_ptr() macro as new
sbi_domain_mpxy_state_thishart_ptr() macro which gets MPXY state from
per-domain data.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Yu-Chien Peter Lin <peter.lin@sifive.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20250325071314.3113941-1-alvinga@andestech.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Recursively expanded variables (defined with '=') are expanded at
evaluation time. These version information variables are evaluated
inside a recipe as part of GENFLAGS. As a result, the shell commands
are executed separately for each compiler invocation. Convert the
version information variables to be simply expanded, so the shell
commands are executed only once, at Makefile evaluation time. This
speeds up the build by as much as 75%.
A separate check is needed to maintain the behavior of preferring the
value of OPENSBI_BUILD_TIME_STAMP from the environment.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250313035755.3796610-1-samuel.holland@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Similarly to what is done for SPELP, handle SSTATUS.SDT upon event
injection. In order to mimick an interrupt, set SDT to 1 for injection and
save its previous value in interrupted_flags[5:5]. Restore it upon
completion.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
As raised during the ARC review, SPELP was not handled during the event
injection process. Save it as part of the interrupted flags, clear it
before injecting the event and restore it after completion.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
For some reason, there was a pair of useless parenthesis around MSTATUS_*
value usage. Remove them.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
As raised by Andrew on the kvm-unit-test review, this flags are meant to
hold SSTATUS bits in the specification. Rename them to match that.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
The SSE specification did specified that read only parameters should
return SBI_EBADRANGE but was modified recently to return SBI_EDENIED.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
The latest specification added new high priority RAS events and renamed
the PMU to PMU_OVERFLOW.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Harts associated with an ACLINT_MSWI need not have sequential hartids.
It is insufficient to use first_hartid and hart_count. To account for
non-sequential hart ids, include the empty hart-ids' generate hart-count.
Signed-off-by: Raj Vishwanathan <Raj.Vishwanathan@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Simplify the code and improve consistency by using the new macros where
possible. sbi_hart_count() obsoletes sbi_scratch_last_hartindex().
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
There is currently no helper for iterating through the harts in a
system, and code must choose between sbi_scratch_last_hartindex() and
sbi_platform_hart_count() for the loop condition.
sbi_scratch_last_hartindex() has unusual semantics, leading to the
likelihood of off-by-one errors, and sbi_platform_hart_count() is
provided by the platform and so may not be properly bounded.
Add a new helper which definitively reports the number of harts managed
by this OpenSBI instance, i.e. the number of valid hart indexes, and a
convenient iterator macro.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The compiler generates much better code for sbi_hartindex_to_hartid()
and sbi_hartindex_to_scratch() when using a constant for the bounds
check. This works out nicely because the underlying arrays are already
a constant size, so the only change needed is to fill the remainder of
each array with the appropriate default/out-of-bounds value. The
ellipsis in the designated initializer is a GCC extension (also
supported by Clang), but avoids runtime initialization of the array.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The internal limit on the number of harts is SBI_HARTMASK_MAX_BITS, as
this value determines the size of various bitmaps and arrays (including
hartindex_to_hartid_table and hartindex_to_scratch_table). Clamp the
value provided by the platform, and drop the extra array element.
Update the documentation to indicate that hart_index2id must be sized
based on hart_count, and that hart indexes must be contiguous. As of
commit 5e90e54a1a ("lib: utils:Check that hartid is valid"), there is
no restriction on the valid hart ID values.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
OpenSBI is compiled with -fPIE, which generally implies dynamic linking.
This causes the compiler to generate GOT references for global symbols
in order to support runtime symbol interposition. However, OpenSBI does
not actually perform dynamic linking, so the GOT indirection just adds
unnecessary overhead.
The GOT references can be avoided by declaring global symbols with
hidden visibility, thus making them local to this dynamic object and
non-interposable. GCC/Clang's -fvisibility parameter is insufficient for
this purpose when referencing objects from other translation units;
either __attribute__((visibility(...)) or the pragma is required. Use
the pragma since it is easier to apply to every symbol. Additionally
clean up the one GOT reference from inline assembly.
With this change, a firmware linked with LLD does not contain either a
GOT or a PLT, and a firmware linked with BFD ld contains only a GOT with
a single (unreferenced, legacy) _GLOBAL_OFFSET_TABLE_ entry.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This reverts commit 6019259dfb.
Now that fdt_driver_init_by_offset() respects the compatible string
fallback priority order, this workaround is no longer necessary.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When matching drivers to DT nodes, always match all drivers against the
first compatible string before considering fallback compatible strings.
This ensures the most specific match is always selected, regardless of
the order of the drivers or match structures, as long as no compatible
string appears in multiple match structures.
Fixes: 1ccc52c427 ("lib: utils/fdt: Add helpers for generic driver initialization")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Return SBI_EALREADY error code instead of SBI_EINVAL, in case an
event is already added to the supported list.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the generic libsbi.a is compiled in create-binary-archive.sh
before platform specific firmwares so a libsbi.a without any SBI extension
gets linked to the platform specific firmwares. To address this, remove
the temporary build directory in create-binary-archive.sh before using it.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
In the original implementation of `sbi_strcpy` and `sbi_strncpy`, if the
destination buffer (`dest`) was longer than the source string (`src`),
the functions did not ensure that the remaining bytes in `dest` were
properly null-terminated. This could result in garbage data being
present in the destination buffer after the copy operation, as the
functions only copied characters from `src` without explicitly
terminating `dest`.
Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch adds unit tests for verifying the sbi_ecall version,
impid handling, and extension registration functions. The tests
ensure that the extension registration and unregistration work
as expected.
Signed-off-by: Akshay Behl <akshaybehl231@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Latest modifications to the spec mandates that a set on a lock feature
returns SBI_ERR_DENIED_LOCKED.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add SBI_ERR_DENIED_LOCKED and set it as the SBI_LAST_ERR which was
wrongly set to SBI_ERR_BAD_RANGE.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The T-HEAD C90x PLIC has some special quirks, such as the S-mode
delegation bit. OpenSBI currently handles this by checking the compatible
string in the device tree.
However, this matching is done in the order of the fdt_match array. So if
a device tree contains both strings, for example:
compatible = "thead,c900-plic", "riscv,plic0";
Then OpenSBI will match against the generic "riscv,plic0" string, since
that appears first in the fdt_match array. This means it will fail to set
the S-mode delegation bit, and Linux will fail to boot. In some cases, it
is not possible to change the compatible string to just the T-HEAD PLIC,
as older versions of Linux only recognize the RISC-V compatible string.
This patch fixes that by moving the RISC-V string to the end, ensuring
that the more specific options get matched first.
Signed-off-by: Alex Studer <alex@studer.dev>
Reviewed-by: Anup Patel <anup@brainfault.org>
This reduces .bss size by 8 KiB, and should reduce overall memory usage
since most platforms will have significantly fewer than 512 entries in
this table. At the same time, it removes the fixed table size limit.
Since the table is only used within fdt_pmu.c, instead of updating the
extern declaration, make the table local to this file.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If a property value is too small, len will be zero after the division
on the next line, so the property will be ignored. This is the same
behavior as when the length check fails. Furthermore, the first two
length checks were already ineffectual, because each item in those
arrays is 12 bytes long, not 8.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When called twice, sse_hart_mask()/sse_hart_unmask() should return
SBI_EALREADY_STOPPED/SBI_EALREADY_STARTED. This was currently inverted.
Fixes: b919daf495 ("lib: sbi: Add support to mask/unmask SSE events")
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the sbi_sse_init() in cold boot path is called after
sbi_domain_finalize() so boot HART of non-root domains will start
before SSE cold boot init which can cause warm boot of such HARTs
to crash in sbi_sse_init().
To address the above issue, factor-out the non-root domain startup
from sbi_domain_finalize() function as a separate sbi_domain_startup()
function which can be called after sbi_sse_init() in cold boot path.
Fixes: 93f7d819fd ("lib: sbi: sse: allow adding new events")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Since commit 76d7e9b8ee ("firmware: remove copy-base relocation"), the
Makefile enforces PIE support.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Anup Patel <anup@brainfault.org>
The latest SBI 3.0 spec defines a new sbi_mpxy_get_shmem_size()
function and simplifies sbi_mpxy_set_shmem() function so update
the MPXY framework and SBI extension accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The supervisor software can directly receive most of the system MSIs
except P2A doorbell and MSIs preferred to be handled in M-mode.
Add MPXY RPMI mailbox client driver for the System MSI service group.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The service group ID assignment and some of the BASE services have
changes in the latest RPMI specification so let's update the RPMI
implementation accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Use the RPMI mailbox channel attributes to populate MPXY channel
attributes instead of hard coding them.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
To allow clients query service group version of a RPMI mailbox channel,
implement get_attribute() callback for the RPMI shared memory mailbox
controller.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The rpmi_mailbox.h uses structures defined in mailbox.h so let's
include mailbox.h in rpmi_mailbox.h header.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The local variable declarations should be at the start of function
and preferrably organized like a inverted pyramid.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Currently, the common MPXY RPMI mailbox client does not support
notifications so no need for dummy notifications support.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The local variable declarations should be at the start of function
and preferrably organized like a inverted pyramid.
Signed-off-by: Anup patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The capability bit assignment in MPXY framework does not match the
SBI MPXY extension in latest SBI specification so update it.
Fixes: 7939bf1329 ("lib: sbi: Add SBI Message Proxy (MPXY) framework")
Signed-off-by: Anup patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Some of the RPMI service groups may need additional context and
special handling when transferring messages via underlying mailbox
channel so introduce optional MPXY RPMI service group operations
for this purpose.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The mpxy_rpmi_mbox_data is provided by RPMI service group specific
MPXY driver to the common MPXY RPMI mailbox client implementation
so let's constantify mpxy_rpmi_mbox_data in mpxy_rpmi_mbox so that
it is not accidently modified.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Instead of having one common FDT MPXY RPMI mailbox client drivers
for various RPMI service groups, split this driver into two parts:
1) Common MPXY RPMI mailbox client library
2) MPXY driver for RPMI clock service group
The above split enables having a separate MPXY driver for each
RPMI clock service group and #1 (above) will allow code sharing
between various MPXY RPMI drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
With the "max" QEMU cpu, the displayed extension string is truncated due
to the buffer being too small. Increase it to 256 to display the full
set of extensions correctly.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For driver subsystems that are not tightly integrated into the OpenSBI
init sequence, it is not important that the drivers are initialized in
any particular order. By putting all of these drivers in one array, they
can all be initialized with a single pass through the devicetree. This
saves about 10 ms of boot time on HiFive Unmatched.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that all drivers are using the fdt_driver functions for
initialization, this function is unused and can be removed.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The irqchip driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_irqchip_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The Sophgo SG2044 is a new version of C920, although it supports
sscofpmf, it still needs this pmu quirks its cores.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Due to some historical issues, the value of BOOT_STATUS_BOOT_HART_DONE
has changed and the comment message needs to be corrected.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
It is possible that hartid may not be sequential and it should not be validated
against SBI_HARTMASK_MAX_BITS. Instead we should check the index of the hartid,
hart index, against SBI_HARTMASK_MAX_BITS.
Signed-off-by: Raj Vishwanathan <Raj.Vishwanathan@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Align SBI_TRAP_CONTEXT_SIZE to a multiple of 16 bytes. If it is not
aligned to 16 bytes for RV64, it can create performance problems.
Aligning it correctly can fix the performance issues.
Signed-off-by: Raj Vishwanathan <Raj.Vishwanathan@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The domain_support.md documentation states that the enforce permission
bit (BIT[6]) could be set in the "regions" property of a domain
instance DT node. However, this bit is masked in the current
implementation. This patch unmasks the bit to make it configurable
from DT.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
1. Initialize struct imsic_data imsic to 0 at definition to prevent the
use of uninitialized memory, ensuring the variable starts with known
values.
2. Remove the redundant memset call on the "aplic" parameter since the
memory for aplic is allocated using sbi_zalloc() by the caller
irqchip_aplic_cold_init(), which guarantees it is already set to 0.
Signed-off-by: Huang Borong <huangborong@bosc.ac.cn>
Reviewed-by: Anup Patel <anup@brainfault.org>
If a standard event was not found in the list of events that are handled
by harts but belongs to the standard event list defined by the
specification, return SBI_ENOTSUPP. Without that, we can not
distinguish a non implemented standard event from a non valid one.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
In order to allow events to be dynamically added, remove the existing
static array of events and use a simply linked list of supported events.
This allows us to move the cb_ops into this list and associated it with
an event_id. Drivers can now register cb_ops before bringing up the sse
core to handle additional events (platform ones for instance).
sbi_sse_init() now allocates as many events as present in the linked
list. Events can now be added with sbi_sse_add_event() which allows to
add new supported events with some callback operations if any. If an
event is not to be supported, then sbi_sse_add_event() should not be
called. This approach currently consider that local events are to be
supported on all harts (ie, they all support the same ISA or
dependencies). If per-hart event availability needs to be supported,
then, an is_supported() callback could be added later and called for
each hart.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add a simple singly linked list implementation when double linked list
are not needed. This allows to easily have statically defined linked
list that can be extended at runtime.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since event support will be checked in the next commits, return a value
from sse_event_get() to allow propagating it. This will be used to
report SBI_ERR_NOT_SUPPORTED when an event isn't supported.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We will add new functions to sbi_double_trap.c in order to register an
SSE event, split this to a header as part of preparation work.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
While sbi_pmu_irq_bit() was used to delegate irq to S-mode, LCOFIP usage
was still hardcoded in various places. This led to change the returned
value of sbi_pmu_irq_bit() to be a bit number rather than a bit mask
since it returns an 'int' and we need to obtain the bit number itself to
handle it in the IRQs handlers. Add a similar function to return the
irq mask which can also be used where the mask is required rather than
the bit itself.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Currently, the same irqchip instance is registered for multiple PLIC
and APLIC instances which causes the sbi_list_for_each_entry() loop
in the sbi_irqchip_init() to hang at boot-time.
To address the above issue, register a separate irqchip instance for
each PLIC and APLIC instance.
Fixes: 2dd6eaf680 ("lib: sbi_irqchip: Call driver warm_init from SBI core")
Reported-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Addition of "Experimental SBI Extensions" to the boot-time prints
disturbs the alignment of other prints so adjust all boot-time
prints accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
These drivers were merged on an experimental basis without the RPMI
specification being frozen. As a result, they may not be compatible with
the frozen version of the RPMI protocol. Additionally, their devicetree
bindings have not been reviewed and are subject to change. Warn the user
that these drivers make no compatibility guarantees, and that their
behavior and devicetree bindings may change incompatibly in future
versions of OpenSBI.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Initialize serial drivers first, so messages printed by other drivers do
not need to use the early console buffer.
Suggested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Improve 64-bit operation under rv32 and remove db_val_u32_hi
in rpmi_cppc_fc_db_trigger().
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The raw events have same event_idx. Thus, the event info sanity check
only relies on the select mask. The raw event check should be done first
so that regular hardware events can be verified using event idx range
check.
Fixes: e434584216 ("lib: sbi_pmu: Implement SBI PMU event info function")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The hardware event map function invoked from platform code should
exclude any raw events as there is a separate function for the raw
events.
Fixes: d8a483fc7f ("lib: sbi_pmu: PMU raw event v2 support")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The shell script makes multiple call-outs to awk to get information
from the configuration file. It would be easier to just write the
whole thing in one .awk script and have the makefile altered to call
that instead.
There should be no functional difference other than the script type
and has been tested with PLATFORM=generic build. This should be both
quicker and easier to understand.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
Send the errors to stderr, otherwise they end up being
written to the file the script was redirecting to in the
Makefile
Also, use EOF block to make it easier to redirect
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
If the script fails, we end up trying to build either
an empty or damaged .c file. Just remove it and let
gcc fail on non-existent file.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
The specification states that a6 contains the current hart id and
a7 contains the entry argument. This was inverted in the current
implementation.
Reported-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Fix GLOBAL_PLAT_0_START/END definitions. The specification states that
the beginning of the range is 0xc000 and the end is 0xffff.
Reported-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Enabling V-extension using -march option causes OpenSBI boot-time
hang with LLVM compiler.
As a work-around, don't enable V-extension using -march option and
instead use a custom OpenSBI specific define inform availability of
V-extension to lib/sbi/sbi_trap_v_ldst.c.
Fixes: c2acc5e5b0 ("lib: sbi_misaligned_ldst: Add handling of vector load/store")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The following error is observed when compiling fdt_cppc_rpmi
driver using LLVM:
lib/utils/cppc/fdt_cppc_rpmi.c:87:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
87 | u64 db_val_u64 = 0;
To fix the above issue, move the variable declaration at the
start of function.
Fixes: 591a98bdd5 ("lib: utils/cppc: Add RPMI CPPC driver")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add misaligned load/store handling for the vector extension
to the sbi_misaligned_ldst library.
This implementation is inspired from the misaligned_vec_ldst
implementation in the riscv-pk project.
Co-developed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add a generic RPMI mailbox client driver which provides a MPXY channel.
Initially, this driver only supports RPMI clock service group but can
be extended to support multiple RPMI service groups.
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple MPXY drivers so add a simple
FDT based MPXY driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Implement the SBI MPXY extension which provides an SBI interface to
the supervisor software for send messages via MPXY framework.
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple CPPC drivers so add a simple
FDT based CPPC driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The RPMI HSM service group provides set of routine to query and control
power states of a Hart. Add RPMI based Hart State Management (HSM) driver.
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
It should possible to fixup FDT from any part of OpenSBI so add
fdt_register_general_fixup() which allows dynamic registration of
FDT fixup callbacks.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add RPMI based system suspend driver.
To test this, execute the follwoing in Linux:
$ echo mem > /sys/power/state
To wake up, execute the following command on qemu monitor terminal:
(qemu) system_wakeup
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple system suspend drivers so add a
simple FDT based system suspend driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add RPMI based driver for system reset and enable it in the generic
platform defconfig
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The RISC-V Platform Management Interface (RPMI) defines a messaging protocol
and shared memory based transport for bi-directional communication with an
on-chip or external microcontroller.
To support RPMI in OpenSBI, add:
1) The RPMI messaging protocol defines and helper macros
2) A FDT mailbox driver for the RPMI shared memory transport
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add a simple FDT based mailbox framework which is built on top of the generic
mailbox library. The phandle of FDT mailbox DT node is treated as the unique
mailbox controller ID which is required by the generic mailbox library. The
FDT based mailbox drivers will be probed on-demand from fdt_mailbox_request_chan()
called by the mailbox client drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add generic mailbox library which is independent of hardware description
format. The OpenSBI platform support or mailbox drivers can register
mailbox controller instances which can be discovered and used by different
mailbox client drivers. Each mailbox controller instance has a unique ID
which can be used by mailbox client drivers for find the mailbox controller
instance. The mailbox client drivers will typically request a mailbox channel
from the mailbox controller and use it to do data transfer with the remote
end of mailbox channel.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
As more drivers adding memregions into root domain, the current static limit
of ROOT_REGION_MAX is not sufficient. Increase the limit to accomodate more
memregions.
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Allow the supervisor software to query about the event using the
new function. This supports both firmware and hardware events.
The hardware event presence is verified hw_event_map which is populated
via PMU device tree node. The firmware event presence is checked through
event validation function which should take care of both standard and
platform firmware events.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The SBI v3.0 introduced a new function to query about the events
without invoking CFG_MATCH. This allows supervisor software to
identify which events are supported on the platform with single
SBI call instead of a CFG_MATCH for each event.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The pmu_validate_event already has the same check for fw events.
The validate function is called prior to the current function
to find a counter for firmware. That's why, the redudant
check can be removed from the find counter function.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As per the updated ISA specification and SBI PMU v3.0, lower 56
bits are available for the platform to implement mhpmeventX
encoding. Implement the PMU raw event V2 support defined in SBI
v3.0 which allows more bits for platforms to encode the raw events.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
grep -e "-mstrict-align\|-mno-unaligned-access" makes use of GNU grep's
backslash-escaped alternation operator \| which is available in basic
regular expression syntax (BRE) mode.
However, in POSIX grep's BRE mode | is an ordinary character which, when
backslash-escaped, matches itself. Therefore, the search pattern becomes
a plain string '-mstrict-align|-mno-unaligned-access' which obviously
never matches the expected error and CC_SUPPORT_STRICT_ALIGN is always set
to y.
When cross-compiling with LLVM on amd64-unknown-openbsd7.6 host for
riscv64-unknown-elf target this results in a compilation error:
clang: error: unsupported option '-mno-unaligned-access' for target
'riscv64-unknown-elf'
Using multiple -e options for this case maintains consistent behaviour
across different grep implementations and fixes the issue.
Signed-off-by: Igor Melnikov <imel@purelymail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The timer driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_timer_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The serial driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_serial_init() first
attempts to match the chosen stdout device, and upon failure matches the
first available serial device in the DT. It is a fatal error if no such
device is found. This matches the behavior of fdt_driver_init_one().
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The reset driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_reset_init() performs a
best-effort initialization of all matching DT nodes. Platform-specific
logic expects exactly one DT node to match a single driver. This is
accomplished by using fdt_driver_init_one() with a local list containing
that one driver.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The regmap driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. It always initializes the driver for a
specific DT node.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The ipi driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_ipi_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The i2c driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. It always initializes the driver for a
specific DT node.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
FDT gpio drivers have an extra .xlate operation, so they need to embed
the `struct fdt_driver` inside the subsystem-specific type. The gpio
subsystem always initializes the driver for a specific DT node.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
It can be useful to embed the objects referenced by a carray inside
another struct. To avoid type punning, the generated carray code must
use the correct type for the enclosing struct and member access to
compute the desired object address.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
awk(1) takes input files as positional arguments, so there is no need
to read the file with cat(1).
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, each driver subsystem contains its own code for matching
drivers against the platform's devicetree blob. This bloats firmware
size because the several FDT scanning loops are almost exact copies of
each other, and is confusing because the loops do have some subtle
differences. Furthermore, the existing match algorithm is inefficient:
it scans the FDT structure separately for each driver in the list. A
faster algorithm scans the FDT blob only once, matching all drivers in
the list for each `compatible` property seen.
Add new helpers implementing this faster algorithm. Since they must
iterate through the list of drivers, the driver structure cannot be
opaque. However, since the driver list is an array of pointers, the
`struct fdt_driver` can be embedded in a subsystem-specific driver
structure if needed. These three helpers cover all existing use cases
for driver initialization within OpenSBI.
An additional benefit of centralized driver initialization is the
consistent use of fdt_node_is_enabled().
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This allows the compiler to generate significantly better code, because
it does not have to maintain either the loop counter or loop limit. Plus
there are half as many symbols to relocate. This also simplifies passing
carray arrays to helper functions.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The hotplug cpu should clear the fwft config's SBI_FWFT_SET_FLAG_LOCK
in the warm boot flow otherwise the cpu can't set the menvcfg.sse by
SBI_EXT_FWFT_SET sbi call and cause the illegal instruction when
accessing the CSR_SSP in kernel.
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In addition to saving some code size, this moves the decision about
setting the top-level external interrupt handler to the irqchip core,
not the specific driver, which would be needed to support chained
interrupt handlers.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that driver lifecycle is managed from within the SBI irqchip core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, each platform keeps track of which irqchip driver is in use
and calls its warm init function. Since the generic platform may use
multiple irqchip drivers, it has logic to track an array of drivers.
The code is simplified and made common across platforms by treating warm
init and exit as properties of the driver, not the platform. Then the
platform's only role is to select and prepare a driver during cold boot.
For now, only add a .warm_init hook, since none of the existing drivers
need an .exit hook. It could be added in the future if needed.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Have the SBI irqchip core keep track of registered irqchip devices. This
is useful for any callbacks the irqchip driver may have, such as for
warm initialization, the external interrupt handler function, and any
future support for handling external interrupts (beyond IPIs) in M-mode.
This improves on the tracking done in fdt_irqchip.c, as it tracks device
instances, not just drivers, so callbacks can target a specific device.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The per-hart PLIC pointer is not really specific to FDT platforms. Move
it into the main driver and drop the extra wrapper functions.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Move the PLIC save/restore functions inside the driver, so they can be
reused on any platform that needs them. The memory needed to store the
PLIC context is also allocated by the driver. The PM data cannot be
completely encapsulated, as some platforms (including Allwinner D1) need
to program the IRQ enable status to a sideband interrupt controller for
wakeup capability.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This removes platform-specific arguments to plic_warm_irqchip_init(),
which makes the driver independent from the platform after cold init,
and allows for further refactoring.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This needs to be in the base PLIC driver as part of the power management
save/restore flow.
This is also in preparation for moving the PLIC information in the
scratch area to the base PLIC driver. After that change, the FDT PLIC
layer will be unable to look up the `struct plic_data` after cold boot.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Unlike other platforms, Ariane and OpenPiton enable all IRQs by default.
This was described in commit b44e844880 ("Add support for Ariane FPGA
SoC") as "due to some issue of the design." Add this workaround behind a
flag in plic_warm_irqchip_init(), so every platform can use the same
warm init function.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that the SBI IPI core clears IPIs at warm boot in a generic way,
none of the drivers or platforms use these hooks, and we can remove
them. Platforms need only to initialize the driver once during cold
init. If other hooks are needed in the future, they can be added to
struct sbi_ipi_device.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
sbi_ipi_init() expects the platform warm init function to clear IPIs
on the local hart, but there is already a generic function to do this.
After this change, none of the existing drivers need a warm init
callback.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
All existing users of this operation target the current hart, and it
seems unlikely that a future user will need to clear the pending IPI
status of a remote hart. Simplify the logic by changing .ipi_clear (and
its wrapper sbi_ipi_raw_clear()) to always operate on the current hart.
This incidentally fixes a bug introduced in commit 78c667b6fc ("lib:
sbi: Prefer hartindex over hartid in IPI framework"), which changed the
.ipi_clear parameter from a hartid to a hart index, but failed to update
the warm_init functions to match.
Fixes: 78c667b6fc ("lib: sbi: Prefer hartindex over hartid in IPI framework")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The default heap size will work for most platforms, but for some
special platforms, the heap is too small to hold all the information
or is too big so that it take too much ram. Introduce configurable
heap should solve this problem and make all generic platforms happy.
Add DT-based heap-size for the generic platform.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
DBTR introduce a big heap allocation to store hart state, this is
allocated percpu and needs big space when CPU number is high.
Increase the percpu part to fix this problem, and decrease the
fixed part to avoid too big heap size.
Fixes: 97f234f (lib: sbi: Introduce the SBI debug triggers extension support)
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The --gc-sections option enables the linker to perform garbage
collection of unreferenced code and data, thereby reducing the binary
size.
The -ffunction-sections option will place each function into a separate
section, so it is necessary to add .text.* to the linker script.
Signed-off-by: Kele Zhang <zhangcola2003@gmail.com>
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
EditorConfig [1] ensures consistent coding styles for developers
collaborating on the same project across various editors and IDEs. By
adopting the Linux project's .editorconfig settings [2] and applying
them to OpenSBI, it helps users maintain uniform indentation across
different IDEs and version control systems, improving development
efficiency.
The main difference from Linux project is the addition of
'trim_trailing_whitespace = true', which removes trailing whitespace
before newlines. This change affects only three files in OpenSBI, but
it improves overall code consistency.
$ grep -nr "\s$" --include={*.{c,dts,h,lds,ldS,mk,s,S.py},Kconfig,Makefile,Makefile.*} .
./include/sbi_utils/fdt/fdt_fixup.h:4: * Implement platform specific DT fixups on top of libfdt.
./platform/generic/platform.c:79: * The fw_platform_coldboot_harts_init() function is called by fw_platform_init()
./platform/generic/platform.c:81: * according to the DT property "cold-boot-harts" in "/chosen/opensbi-config"
Link: https://editorconfig.org/ [1]
Link: https://lore.kernel.org/lkml/ZbAbmchIO8Cd5hNd@surfacebook.localdomain/T/ [2]
Signed-off-by: Hui Min Mina Chou <minachou@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since the FDT is not modified during driver initialization, node offsets
are just as suitable as phandles for use as identifiers: they are stable
and unique. With this change, it is no longer necessary to pass the
phandle to the driver init functions, so these init functions now use
the same prototype as other kinds of drivers.
This matches what is already done for I2C adapters.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since the FDT is not modified during driver initialization, node offsets
are just as suitable as phandles for use as identifiers: they are stable
and unique. With this change, it is no longer necessary to pass the
phandle to the driver init functions, so these init functions now use
the same prototype as other kinds of drivers.
This matches what is already done for I2C adapters.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This function looks up a chip's driver by matching known drivers against
chip->driver, but that is equivalent to using chip->driver directly.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that driver lifecycle is managed from within the SBI timer core,
platforms need only to initialize the driver once during cold init.
Remove the remaining platform hooks that are no longer used.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the platform's timer device is tracked in two places: the
core SBI implementation has `timer_dev`, and the FDT timer layer has
`current_driver`. The latter is used for warm initialization of the
timer device. However, this warm init is not specific to FDT-based
platforms; other platforms call exactly the same functions from the
same point in the boot sequence.
The code is simplified and made common across platforms by treating warm
init and exit as properties of the driver, not the platform. Then the
platform's only role is to select and prepare a driver during cold boot.
For now, only add a .warm_init hook, since none of the existing drivers
need an .exit hook. It could be added in the future if needed.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
CSR_PMPADDRn lower bits may read all-0 or all-1, depending on
the configuration. For TOR it is all-0, for NAPOT - all-1.
Thus if PMP entry was pre-configured as NAPOT, original code would
stop scanning because value read back not equal to the written one.
Mask lower bits before comparison to fix this
Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
csr_read() is marked as volatile and clobbering memory, which is
generally the safe thing to do. However, these two CSRs do not have any
side effects, and the values returned do not change between calls. The
compiler can generate better code if we allow it to reorder calls to
these functions and cache the return value. Introduce csr_read_relaxed()
for this use case.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add support for the Smdbltrp[1] ISA extension. First thing to do is
clearing MDT on entry after setting the first MTVEC (since MDT is
reset to 1). Additionally, during trap handling, clear MDT once all
critical CSRs have been saved and in return path, restore MSTATUS/H
before restoring MEPC to avoid taking another trap which would clobber
it.
Link: https://github.com/riscv/riscv-double-trap/releases/download/v0.56/riscv-double-trap.pdf [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
MENVCFG access will be used as well for double trap, landing pad and
shadow stack fwft support. Factorize that in a common function.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
In case the double trap handler is called and the double trap happened
in supervisor mode, send a double trap SSE event.
NOTE: this commit depends on the ratification of the new SSE event
id for double trap [1].
Link: https://lists.riscv.org/g/tech-prs/message/985 [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add Ssdbltrp trap handler support for S-mode double trap handling. If
the trap is received while in VS-mode, then the trap is redirected to
S-mode. If caught while in HS-mode, then an error is returned to the top
trap handler which will panic.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Previous privilege mode retrieval from mstatus is done at different
places, factorize it rather than copy/pasting it again.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The same pattern is used at multiple places to verify in which mode
the exception was actually taken. Factorize it.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The hartindex_to_context_table field is no longer part of sbi_domain
so remove related documentation from domain_support.md.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The per-domain hartindex_to_context_table[] is yet another per-domain
data required for implementing hart entry into (or exit from) domain.
Use the recently added domain data support for per-domain hart context
so that a dedicated hartindex_to_context_table[] in struct sbi_domain
is not needed.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Different parts of OpenSBI require their own per-domain data so
introduce domain data (or sbi_domain_data) which can be registered
by any part of OpenSBI. Using the domain data, the domain framework
will create a data pointer for every domain which can be used to
maintain some per-domain state.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
The sbi_domain_context.h includes sbi_domain.h and the sbi_domain.h
also includes sbi_domain_context.h. Remove this cyclic include in
sbi_domain_context.h.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Use sbi_domain_memregion_init() at the time of parsing domains from
FDT so that sbi_domain_memregion_init() is always used for setting
up all memregions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The sbi_domain_root_add_memregion() is only used within sbi_domain
implementation so rename and make it a local function.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update APLIC driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update IMSIC driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update ACLINT mswi driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
In a multi-core startup scenario, if both _try_lottery and
_wait_for_boot_hart use the data in the _boot_status address, when
a CPU enters OpenSBI later than boot hart set the _boot_status to
BOOT_STATUS_BOOT_HART_DONE, the CPU will modify _boot_status to 1
by amoswap.w and will never be awakened in _wait_for_boot_hart.
So let _try_lottery and _boot_status use data from two addresses.
Fixes: 8151105af5 ("firmware: fw_base.S: Remove _relocate_lottery")
Signed-off-by: dong.yang <dong.yang@sophgo.com>
Reviewed-by: Xing Xiaoguang <xiaoguang.xing@sophgo.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Force carray C source files to be regenerated when the script changes,
since their contents depend on the script's output.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since commit 78c667b6fc ("lib: sbi: Prefer hartindex over hartid in
IPI framework"), The .ipi_clear callback functions take a hart index,
not a hartid. However, these warm_init functions were never updated.
Fixes: 78c667b6fc ("lib: sbi: Prefer hartindex over hartid in IPI framework")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
All callers already have the hartindex available, so this removes a
hartid to hartindex conversion.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This removes redundant hartid to hartindex conversions from four call
sites and provides a net reduction in code size.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This removes several hartid/hartindex conversions, as well as two loops
through the mask for broadcast IPIs.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This removes some hartindex conversions in sbi_system_suspend(), but is
mostly intended to support refactoring sbi_hsm_hart_interruptible_mask()
to work exclusively with struct sbi_hartmask.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Use the IPI .update callback to exclude the local hart. This allows
reusing the normal logic for broadcasting an IPI to all active harts.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This simplifies the logic so that sbi_hsm_hart_interruptible_mask() is
only called from one place (sbi_ipi_send_many()). A minor functional
change is that the legacy functions can now affect more than XLEN harts
when targeting all harts.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This avoids needing to map the target hartid to a hart index when
enabling or disabling an event, and provides a net code size reduction.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This avoids calls to the expensive sbi_hartid_to_hartindex() function
and also makes the firmware smaller.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This is a more efficient way to get the index of the current hart than
calling a function to loop through the hartindex -> hartid lookup table.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This check has been obsolete since commit c51f02cf14 ("include:
sbi_platform: Introduce HART index to HART id table"). It originally
filtered out harts that were disabled in the FDT, but those harts are
omitted from the hart_index2id table, so they will hang in fw_base.S
after the "Find HART index" loop and never enter sbi_init().
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reduce the code size by using single-byte loads instead of bit
manipulation. This method also does the right thing on (hypothetical)
big-endian systems.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Supervisor software can enable control flow integrity features for itself
using fwft feature `SBI_FWFT_LANDING_PAD` and `SBI_FWFT_SHADOW_STACK`.
This patch implements the mechanism to enable both these fwft.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
zicfiss and zicfilp introduces new exception (cause=18). Delegate this
exception to S mode because cfi violations in U / S will be reported
via this exception.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
This patch adds support to check for zicfilp / zicfiss extension.
zicfilp record status of hart's ELP state in *status csr. Missing landing
pad sets MPELP in mstatus. When SBI is redirecting back to S/VS/HS, SPELP
is set in sstatus/vsstatus.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Zicfilp / Zicfiss extension (see link) introduces b2 (LPE) in menvcfg CSR to
enable landing pads and b3 (SSE) in menvcfg CSR to enable shadow stack and
landing pad for privilege less than M. Additionally extension introduces new
bits in *status for recording landing pad state and a new exception type
`software check exception` with cause=0x12.
Link: https://github.com/riscv/riscv-cfi
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add BIT_ULL and GENMASK_ULL for dealing with 64-bits data on
32-bits CPU, then we don't need to separate the operation to
low part and high part. For instance, the MMIO register is
64 bits wide.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
OpenSBI development workflow is mailing list based from the
beginning. Initially, github PRs were added as an option but it turned
out that it is not feasible to support both github PR and mailing list
based workflows. Hence, all the PRs has been redirected to use the
mailing list from a long time. In fact, it is source of confusion to
have both options.
Update the documentation to reflect the reality.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add support for controlling the pointer masking mode on harts which
support the Smnpm extension. This extension can only exist on harts
where XLEN >= 64 bits. This implementation selects the mode with the
smallest PMLEN that satisfies the caller's requested lower bound.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Writes to the low half CSR should not affect the high half of the value.
Make this separation explicit by writing to the delta in memory as two
adjacent XLEN-sized values.
Fixes: 1e9f88889f ("lib: Emulate HTIMEDELTA CSR for platforms not having TIME CSR")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This removes the compile-time limit on the number of domains. It also
reduces firmware size by about 200 bytes by removing the lookup table.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
These comments are inaccurate as of commit db56341dfa ("lib: sbi:
Allow platforms to provide root domain memory regions"), which modified
root domain registration to go through sbi_domain_register() like other
domains.
Fixes: db56341dfa ("lib: sbi: Allow platforms to provide root domain memory regions")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
It is possible that the OpenSBI config DT node is present but
the "cold-boot-harts" DT property is not present. In this case,
the fw_platform_coldboot_harts_init() will do nothing which
in-turn causes OpenSBI firmware hang at boot time.
To address the above issue, fallback to the default approach
when the "cold-boot-harts" DT property is not present.
Fixes: 67ce5a763c ("platform: generic: Add support for specify coldboot harts in DT")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
In `csr_read_allowed` and `csr_write_allowed` macros, has already
converted second param to `ulong`. So delete redundant `ulong`
where uses csr_read/write_allowed macros.
Signed-off-by: Zhang RunMin <runmin.zhang@ingenic.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The domain_support.md documentation states that "the HART to domain instance
assignment can be parsed from the device tree using *optional* DT property
opensbi-domain in each CPU DT node". However, the current implementation does
not treat this parameter as optional when determining which HARTs to assign to
a freshly discovered domain from the device tree, causing an effect where every
HART in the system must be explicitly assigned to a domain only if a domain is
specified in the device tree. Instead, this patch simply ignores CPUs that do
not specify a domain, and does not attempt to assign them into the recently
discovered domain.
Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When building OpenSBI via a submodule, OPENSBI_VERSION_GIT can be left
unset in case '.git' isn't a dir. This is the case when building OpenSBI
as a QEMU submodule:
$ cat .git
gitdir: ../../.git/modules/roms/opensbi
As a result, building OpenSBI tag v1.5.1 in QEMU will result in a binary
that will have "OpenSBI v1.5" as a banner.
Use "git rev-parse --git-dir" instead of checking if '.git' is a dir to
detect if the current dir is a git repo.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This parameters was a remnant of a previous version, remove it now that
it is unused.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Help tracking the lifecycle of the FDT blob by indicating which parts of
the firmware modify it, and thus invalidate any previously-obtained
offsets or pointers to data inside the blob.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Several of these override functions access the FDT blob. Explicitly
indicate which callbacks are allowed to modify the FDT blob by passing
the parameter as a possibly-const pointer. This also reduces code size
by deduplicating the call to fdt_get_address().
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Distinguish between functions which modify the devicetree and those
which only extract information from it. Other than the iterators in
fdt_domain.c, this is a mechanical conversion.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The function prototype should use the same parameter name as the
documentation and the function definition.
Fixes: 33bf917460 ("lib: utils: Add fdt_add_cpu_idle_states() helper function")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The diagram shown below illustrates the boot-flow involving OP-TEE OS
initialization.
(1)-----------+
| U-Boot SPL |
+------------+
|
v
(2)-------------------------------------------------------------+
| OpenSBI (fw_dynamic) |
| (4)------------------------+ |
| | optee dispatcher driver | |
+-----------------+-------^---------|-------+------------------+
M-mode | | |
---------+--[trusted domain]---+----.----+--[untrusted domain]-------
S-mode | (coldboot domain) | | |
v | | v
(3)---------------------------+ |(5)----------------------------+
| OP-TEE OS | | | U-Boot |
+----------------------------+ | +-----------------------------+
| |
| v
|(6)----------------------------+
| | Linux |
| +-----------------------------+
As OP-TEE OS has device-tree node fixups that need to be passed
through to the next boot stages, e.g. the reserved memory node:
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
optee_core@f1000000 {
no-map;
reg = <0x0 0xf1000000 // OP-TEE OS base address
0x0 0x01000000>;
};
<...>
};
Instead of using 0x0 as the default value, allow identical next-arg1
to be used by non-coldboot domain (i.e., untrusted domain) when the
property is not provided.
Also, update the description of next-arg1 property in the document.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add a new Andes SBI call to free a PMA entry, and reset the memory
attributes for the corresponding NAPOT region.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Implement a new Andes SBI call, which is to set up a NAPOT region
with given memory attributes.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add a new Andes SBI call to check whether PPMA is supported by hardware
or not.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Describe Andes PPMA in the config option, and select it for AE350
platform.
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
- Completed TODO in `system_opcode_insn` to ensure CSR read/write
instruction handling.
- Refactored to use new macros `GET_RS1_NUM` and `GET_CSR_NUM`.
- Updated `GET_RM` macro and replaced hardcoded funct3 values with
constants (`CSRRW`, `CSRRS`, `CSRRC`, etc.).
- Removed redundant `GET_RM` from `riscv_fp.h`.
- Improved validation and error handling for CSR instructions.
This patch enhances the clarity and correctness of CSR handling
in `system_opcode_insn`.
Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This change adds a simple implementation of sbi_aligned_alloc(), for future use
in allocating aligned memory for SMMTT tables.
Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In the next commit, we'll add a new sbi_memalign() function. In order to
allocate aligned memory, we'll sometimes need to allocate from the middle of a
heap block, effectively splitting it in two. Allocating from the beginning of a
heap block in the nonaligned case more closely matches this behavior, reducing
the complexity of understanding the heap implementation.
Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The upcoming SMMTT implementation will require some larger contiguous memory
regions for the memory tracking tables. We plan to specify the memory region
for these tables as a reserved-memory node in the device tree, and then
dynamically allocate individual tables out of this region. These changes to the
SBI heap allocator will allow us to explicitly create and allocate from a
dedicated heap tied to the table memory region.
Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
pmp_get() may return an error if the given entry, given by the caller
of is_pmp_entry_mapped(), is invalid. This results in the output
parameters for pmp_get() being uninitialized. To avoid using garbage
values, check the result and return early if necessary.
This issue is not being hit because at the moment
is_pmp_entry_mapped() is only being called from a single site with a
valid hardcoded value.
Signed-off-by: Carlos López <carlos.lopezr4096@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The fwt_hart_state struct inciludes a flexible array member, so its
allocation size will be that of the struct itself, plus that of each
of the members in the array. When calculating this size, instead of
taking the size of the struct, the size of a pointer to it was taken,
which is incorrect. Luckily, this happenned to not produce memory
corruption because the size of the non-flexible members of the struct
is the same as the size of a pointer.
Signed-off-by: Carlos López <carlos.lopezr4096@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In several dbtr functions, we first check that the dbtr trigger is not
NULL and that its state is what we expect. However, it only makes
sense to perform the second check if the dbtr trigger is not NULL.
Othwerwise we will dereference a NULL pointer. Thus, change the
condition so that it shortcuts to the first check if necessary.
Signed-off-by: Carlos López <carlos.lopezr4096@gmail.com>
Reviewed-By: Anup Patel <anup@brainfault.org>
Currently, OpenSBI reserves the upper 16 bits in mhpmevent for
the Sscofpmf extension.
However, according to the Sscofpmf extension specification[1],
it only defines the upper 8 bits in mhpmevent for privilege mode
inhibit and counter overflow disable. Other bits are defined by
the platform for event selection.
Since vendors might define raw event encoding exceeding 48 bits in
mhpmevent, we should adjust the MHPMEVENT_SSCOF_MASK to support it.
Link: https://github.com/riscvarchive/riscv-count-overflow [1]
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The console device is registered by platform only in early_init()
callback so any prints before this point will be lost. Introduce an
early console buffer for caching prints before platform early_init().
For crashes before platform early_init(), users can simply dump the
contents of the console_early_buffer[] string using a debugger. The
relative address of the console_early_buffer[] string can be found
using following two commands:
CONSOLE_EARLY_FIFO_ADDR=`${CROSS_COMPILE}objdump -D \
build/platform/generic/firmware/fw_dynamic.elf | \
grep "<console_early_fifo>:" | awk '{print $1}'`
${CROSS_COMPILE}objdump -R build/platform/generic/firmware/fw_dynamic.elf | \
grep $CONSOLE_EARLY_FIFO_ADDR | awk '{print $3}'
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
The FIFO data structure is quite handy of variety of use-case so add
SBI_FIFO_INITIALIZER() and SBI_FIFO_DEFINE() helper macros to create
FIFO as local or global variable.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
Extend sbi_fifo_enqueue() to allow forceful queueing by droping
data from the tail.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
Don't use sbi_memcpy() for basic data types in fifo enqueue/dequeue
instead use direct type-cast and assignment.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
Now that all platforms have been updated to initialize serial console
device in early_init(), the sbi_console_init() and console_init()
platform callback are redundant hence remove them.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
The sbi_console_init() does not do any special initialization so
setup serial console device in early_init() so that console prints
work as early as possible.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-By: Himanshu Chauhan <hchauhan@ventanamicro.com>
Attempting to access the menvcfg CSR raises an illegal instruction
exception on hardware which implements Sm1p11 or older.
Fixes: e9ee9678ba ("lib: sbi: fwft: add support for SBI_FWFT_PTE_AD_HW_UPDATING")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
A new property has been added, with an extensive rationale at [1], that
can be used in place of "riscv,isa" to indicate what extensions are
supported by a given platform that is a list of strings rather than a
single string. There are some differences between the new property,
"riscv,isa-extensions" and the incumbent "riscv,isa" - chief among them
for the sake of parsing being the list of strings, as opposed to a
string. Another advantage is strictly defined meanings for each string
in a dt-binding, rather than deriving meaning from RVI standards. This
may likely to some divergence over time, but, at least for now, there's
no relevant differences between the two for an M-Mode program.
Add support for the new property in OpenSBI, prioritising it, before
falling back to the, now deprecated, "riscv,isa" property if it is not
present.
Link: https://lore.kernel.org/all/20230702-eats-scorebook-c951f170d29f@spud/ [1]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch introduces a new math test suite to the SBI unit
tests. The changes include:
* Updating lib/sbi/tests/objects.mk to include
math_test_suite and sbi_math_test.o.
* Adding a new file lib/sbi/tests/sbi_math_test.c which
contains tests for log2roundup function using various cases.
The addition of this test suite ensures that mathematical
functions are verified and work as expected.
Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch improves the readability of the SBI unit test
output by adding color-coded status messages.
Adding ANSI color codes for green (pass) and red (fail)
in sbi_unit_test.c.
Now, the test results will be displayed in green for passed
tests and red for failed tests, making it easier to quickly
distinguish between them.
Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
After the changes introduced by the previous patches are applied, there
is no need of the manual removal of the `build/` directory every time
new test is added. Running `make clean` should be enough to regenerate
the carray-related files.
Update the documentation correspondingly.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add a comment about where auto-generated file came from to the carray.sh
output. This should help avoiding confusion for the developers looking
at the build artifacts and finding .c files there.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
Illegal CSR accesses from lower privilege modes are delegated to S-mode
and do not necessarily indicate a bug. Supervisor software may want to
emulate some CSRs, or may intentionally disable access to certain
existing CSRs, and thus will expect traps when those CSRs are accessed.
For example, Linux disables sstatus.VS by default in order to detect
when userspace first accesses vector register state; this includes the
CSRs defined by the V extesion. As a result, if the first vector
instruction in a process is a CSR access, OpenSBI will log the illegal
instruction exception, even though there is no unexpected or erroneous
behavior occurring.
Since the illegal instruction exception is delegated to S-mode, S-mode
software should be responsible for reporting the exception, not OpenSBI.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This commit adds a new GitHub Actions workflow for repository
lockdown. The workflow triggers when a pull request is opened, and it
notifies the contributor to use the OpenSBI mailing list for patch
reviews.
Additionally, the .gitignore file is updated to include the .github
directory.
Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Anup Patel <anup@branifault.org>
2024-07-04 10:31:39 +05:30
278 changed files with 12517 additions and 3276 deletions
@@ -70,7 +93,6 @@ int sbi_ecall_register_extension(struct sbi_ecall_extension *ext)
returnSBI_EINVAL;
}
SBI_INIT_LIST_HEAD(&ext->head);
sbi_list_add_tail(&ext->head,&ecall_exts_list);
return0;
@@ -148,7 +170,7 @@ int sbi_ecall_init(void)
structsbi_ecall_extension*ext;
unsignedlongi;
for(i=0;i< sbi_ecall_exts_size;i++){
for(i=0;sbi_ecall_exts[i];i++){
ext=sbi_ecall_exts[i];
ret=SBI_ENODEV;
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
