cpu_offset and cpu_intc_offset must be int to detect failed invocations of
fdt_node_offset_by_phandle() or fdt_parent_offset().
After determining cpu_offset we have to check this value and not
cpu_intc_offset.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
cpu_offset, cpu_intc_offset must be int to discover failed invocations of
fdt_node_offset_by_phandle() or fdt_parent_offset().
After determining cpu_offset we have to check this value and not
cpu_intc_offset.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
We fix the following semihosting compile error observed using LLVM:
lib/utils/serial/semihosting.c:158:12: error: result of comparison of constant -1 with expression of type 'char' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
ret = ch > -1 ? ch : -1;
~~ ^ ~~
Fixes: 7f09fba86e ("lib: utils/serial: add semihosting support")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
uart->reg_offset and uart->reg_io_width are only used on uart8250 and
not required on other platforms. Remove for sifive and gaisler.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Move Andes PLICSW ipi device to fdt ipi framework, this patch is based
on Leo's modified IPI scheme on PLICSW.
Current IPI scheme uses bit 0 of pending reigster on PLICSW to send IPI
from hart 0 to hart 7, but bit 0 needs to be hardwired to 0 according
to spec. After some investigation, self-IPI seems to be seldom or never
used, so we re-order the IPI scheme to support 8 core platforms.
dts example (Quad-core AX45MP):
plicsw: interrupt-controller@e6400000 {
compatible = "andestech,plicsw";
reg = <0x00000000 0xe6400000 0x00000000 0x00400000>;
interrupts-extended = <&CPU0_intc 3
&CPU1_intc 3
&CPU2_intc 3
&CPU3_intc 3>;
interrupt-controller;
#address-cells = <2>;
#interrupt-cells = <2>;
};
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch generalizes the logic to add a memory range with desired
alignment and flags of consecutive regions to the root domain.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch does following fixes in fdt_pmu_setup():
1) If any of the event mapping DT property is absent or too small
then don't skip parsing of other DT properties.
2) Return failure if sbi_pmu_add_hw_event_counter_map() fails.
3) Return failure if sbi_pmu_add_raw_event_counter_map() fails.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We update gpio drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate gpio
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update i2c drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate i2c
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update irqchip drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate irqchip
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update ipi drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate ipi
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update timer drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate timer
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update system drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate system
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update reset drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate reset
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We update serial drivers makefile to use kconfig for enabling/disabling
drivers. To avoid compile errors, we also enable appropriate serial
drivers for each platform.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
We extend the top-level makefile to allow kconfig based configuration
for each platform where each platform has it's own set of configs with
"defconfig" being the default config.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Atish Patra <atishp@rivosinc.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
RISC-V doesn't generate exceptions on divide-by-zero, but the result,
all bits set, is not likely what people expect either. In all cases
where we divide by baudrate there's a chance it's zero (when the DT
it came from is "bad"). To avoid difficult to debug situations, leave
baudrate dependent registers alone when baudrate is zero, as, also in
all cases, it appears we can skip initialization of those registers
and still [hopefully] have a functioning UART.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
While it doesn't look like there are any current cases of using
uninitialized data, let's zero all the UART data members to be
safe. Zero may not actually be better than a random number in
some cases, so all structure members should still be validated
before use, but at least zero is usually easier to debug than
some random stack garbage...
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Factor out the common code used by the fdt UART node parsers,
allowing us to drop duplicate code.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The age old version of Shakti UART was upgraded long back, but we missed
updating the driver in OpenSBI. The old version of UART is not supported
anymore, hence removed the inline comment which is also outdated now.
Signed-off-by: Prasanna T <ptprasanna@gmail.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The allwinner,sun20i-d1-clint compatible string is not documented in any
official binding, so it should not be used by drivers.
The MSWI in the D1 CLINT is compatible with the ACLINT specification, so
it can take advantage of generic driver support. However, that is only
possible if the MSWI and MTIMER are split into separate DT nodes. This
means the final binding for this device is likely to be incompatible
with what is implemented here.
Remove this compatible string from the driver to prevent it from
appearing in a stable version and causing future issues.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
The second invocation of plic_context_init() incorrectly calls the
function with m_cntx_id instead of s_cntx_id. This breaks systems which
only have 1 external interrupt per hart.
Fixes: 8c362e7 ("lib: irqchip/plic: Factor out a context init function")
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
The CLINT in the Allwinner D1 SoC apparently does not support 64-bit
MMIO access. A property was added to support this quirk (and that
property was copied to the ACLINT MTIMER code). However, since this
difference in behavior makes the D1 CLINT incompatible with the SiFive
CLINT's programming interface, a better solution is to use a separate
compatible string.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Based on architecture review committee feedback, the [m|s|vs]seteienum,
[m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clreipnum CSRs are
removed in the latest AIA draft v0.3.0 specification.
(Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)
These CSRs were mostly for software convenience and software can always
use [m|s|vs]iselect and [m|s|vs]ireg CSRs to update the IMSIC interrupt
file bits.
We update the IMSIC programming as-per above to match the latest AIA
draft specification.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
The delegation bit is lost along with the rest of the PLIC state when
the CPU power domain in the Allwinner D1 is powered down, so the PLIC
needs to be re-delegated to S-mode during the hart resume path.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
These functions save/restore the state of the PLIC associated with the
current hart. The context save/restore functions only manipulate a
single context, since most likely the M-mode context is unused and does
not need to be saved.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
These can be used by platform code to save the PLIC priority state, if
it would otherwise be lost during non-retentive suspend. The platform
is responsible for allocating all necessary storage.
As a space optimization, store the saved priority values as 8-bit
integers, since that is large enough to hold any priority value on the
relevant platforms.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
These can be used by platform code to save the PLIC context state, if
it would otherwise be lost during non-retentive suspend. The platform
is responsible for allocating all necessary storage.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
This simplifies both the callers and the callees by removing duplicated
code and consolidating the error handling. It also fixes two bugs in the
process:
1) ie_words was one too large when plic->num_src was a multiple of 32.
2) plic_set_ie takes a 32-bit mask, not a Boolean value, so the FPGA
platforms previously only enabled one out of every 32 interrupts.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
None of the functions modify the passed-in plic_data, so mark it const.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Match data stores hardware attributes which do not change at runtime, so
it does not need to be mutable. Make it const.
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
The function returns the highest hart-id of the harts actually used in
the system (enabled). Change the name to reflect this fact.
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If an FDT node contains a "status" property and this property is not
"ok" or "okay", this node should be ignored. Introduce a function that
checks this.
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Instead of having FDT gpio driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Instead of having FDT i2c adapter driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Instead of having FDT ipi driver list hard-coded in the C source,
we generate it using carray.sh at compile-time.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
