Similarly to what is done for SPELP, handle SSTATUS.SDT upon event
injection. In order to mimick an interrupt, set SDT to 1 for injection and
save its previous value in interrupted_flags[5:5]. Restore it upon
completion.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
As raised during the ARC review, SPELP was not handled during the event
injection process. Save it as part of the interrupted flags, clear it
before injecting the event and restore it after completion.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
As raised by Andrew on the kvm-unit-test review, this flags are meant to
hold SSTATUS bits in the specification. Rename them to match that.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
The latest specification added new high priority RAS events and renamed
the PMU to PMU_OVERFLOW.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
This patch adds unit tests for verifying the sbi_ecall version,
impid handling, and extension registration functions. The tests
ensure that the extension registration and unregistration work
as expected.
Signed-off-by: Akshay Behl <akshaybehl231@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add SBI_ERR_DENIED_LOCKED and set it as the SBI_LAST_ERR which was
wrongly set to SBI_ERR_BAD_RANGE.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The latest SBI 3.0 spec defines a new sbi_mpxy_get_shmem_size()
function and simplifies sbi_mpxy_set_shmem() function so update
the MPXY framework and SBI extension accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Fix GLOBAL_PLAT_0_START/END definitions. The specification states that
the beginning of the range is 0xc000 and the end is 0xffff.
Reported-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Implement the SBI MPXY extension which provides an SBI interface to
the supervisor software for send messages via MPXY framework.
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The SBI v3.0 introduced a new function to query about the events
without invoking CFG_MATCH. This allows supervisor software to
identify which events are supported on the platform with single
SBI call instead of a CFG_MATCH for each event.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As per the updated ISA specification and SBI PMU v3.0, lower 56
bits are available for the platform to implement mhpmeventX
encoding. Implement the PMU raw event V2 support defined in SBI
v3.0 which allows more bits for platforms to encode the raw events.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In case the double trap handler is called and the double trap happened
in supervisor mode, send a double trap SSE event.
NOTE: this commit depends on the ratification of the new SSE event
id for double trap [1].
Link: https://lists.riscv.org/g/tech-prs/message/985 [1]
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add support for controlling the pointer masking mode on harts which
support the Smnpm extension. This extension can only exist on harts
where XLEN >= 64 bits. This implementation selects the mode with the
smallest PMLEN that satisfies the caller's requested lower bound.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This extension [1] allows to deliver events from SBI to supervisor via
a software mechanism. This extension defines events (either local or
global) which are signaled by the SBI on specific signal sources (IRQ,
exceptions, etc) and are injected to be executed in supervisor mode.
[1] https://lists.riscv.org/g/tech-prs/message/798
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch adds defines for SBI debug trigger extension and
function IDs to access the extension.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
OpenSBI doesn't support SBI PMU snapshot yet as there is not much benefit
unless the multiple counters overflow at the same time.
Just add the definition and return not supported error at this moment. The
default returned error is also not supported. Thus, no functional change
intended.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
The bits encoded in event_idx[19:16] indicate the event type, with
an offset of 16 instead of 20.
Fixes: 13d40f21d5 ("lib: sbi: Add PMU support")
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We reserve space for SBI implementation specific custom firmware
events which can be used by M-mode firmwares and HS-mode hypervisors
for their own use. This reserved space is intentionally large to
ensure that SBI implementation has enough space to accommodate
platform specific firmware events as well.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
To support 64 bit firmware counters on RV32 systems, we implement
sbi_pmu_counter_fw_read_hi() which returns the upper 32 bits of
the firmware counter value. On RV64 (or higher) systems, this
function will always return zero.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add the SUSP extension probe and ecall support, but for now the
system suspend function is just a stub.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, there is no sanity check for firmware event code. We don't see
any issue as Linux kernel driver does a bound check on firmware events
already. However, OpenSBI can't assume sane supervisor mode software
always. Thus, an invalid event idx can cause a buffer overflow error.
For hardware events, the match will fail for invalid event code anyways.
However, a search is unecessary if event code is invalid.
Add a event ID validation function to solve the issue.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
RISC-V SBI v0.3 specification defined a PMU extension to configure/start/stop
the hardware/firmware pmu events.
Implement PMU support in OpenSBI library. The implementation is agnostic of
event to counter mapping & mhpmevent value configuration. That means, it
expects platform hooks will be used to set up the mapping and provide
the mhpmevent value at runtime.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
The SBI function IDs for RFENCE extension must match the SBI specification.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We simplify HSM state define names so that these defines can directly
replace SBI_HART_xyz defines used by SBI HSM implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend the SBI ecall interface header for the SBI SRST extension
recently accepted in SBI specification v0.3-draft.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We should only return valid error codes from SBI ecalls as
defined by the RISC-V SBI spec.
To achieve this:
1. We use SBI_Exxxx defines for OpenSBI internal errors with
error values starting from -1000
2. We use SBI_ERR_xxxx defines for errors defined by SBI spec
3. We map some of the SBI_Exxxx defines to SBI_ERR_xxxx defines
which are semantically same
4. We throw a error print and force return error code to
SBI_ERR_FAILED in sbi_ecall_handler() if we see an invalid
error code being returned to S-mode
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This fixes various coding style issues found in the SBI codes.
No functional changes.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
SBI HSM extension defines possible hart status values in the
specification.
Define all possible status values. Add a helper function to
convert hart state to status because hart states are internal
to OpenSBI only and may not match the status values defined in
the specification.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Take this opportunity to move the enums to macros as enums make
sbi_ecall_interface.h unusable in assembly files.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
SBI v0.2 specification allows vendor extensions and it should be
implemented in a independent of the core sbi library.
Introduce a single platform callback that will let platforms handle
all vendor extensions in platform specific code if they want.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
SBI v0.2 introduces a base specification which is mandatory to
implement for any SBI implementations that is not legacy.
Add support for the base extension.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Current SBI implementation is now considered as version 0.1 and will be
removed/replaced with newer extension/functions in future.
Rename the existing implementations accordingly to be in sync with the
specification.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Test payload uses an SBI call and uses the macros defined in interface
header which is not the correct place to have these definitions.
The interface header file should be used to keep SBI specification
related macros.
Keep all the test payload related code in test itself.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <olof@lixom.net>
One of the shortcomings of clang-format is that it doesn't allow
for aligned define tables, which is used for a number of constants.
Add annotation to disable the automatic formatting where needed.
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Define sbi_ecall_console_puts() using sbi_ecall_console_putchar()
renamed as sbi_ecall_console_putc() and remove the hardcoded version
of the same funtion in the test payload code.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
This patch moves all ECALL defines to sbi_ecall_interface.h so
that it can be shared with firmware payloads.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
