uart->reg_offset and uart->reg_io_width are only used on uart8250 and
not required on other platforms. Remove for sifive and gaisler.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Move Andes PLICSW ipi device to fdt ipi framework, this patch is based
on Leo's modified IPI scheme on PLICSW.
Current IPI scheme uses bit 0 of pending reigster on PLICSW to send IPI
from hart 0 to hart 7, but bit 0 needs to be hardwired to 0 according
to spec. After some investigation, self-IPI seems to be seldom or never
used, so we re-order the IPI scheme to support 8 core platforms.
dts example (Quad-core AX45MP):
plicsw: interrupt-controller@e6400000 {
compatible = "andestech,plicsw";
reg = <0x00000000 0xe6400000 0x00000000 0x00400000>;
interrupts-extended = <&CPU0_intc 3
&CPU1_intc 3
&CPU2_intc 3
&CPU3_intc 3>;
interrupt-controller;
#address-cells = <2>;
#interrupt-cells = <2>;
};
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This patch does following fixes in fdt_pmu_setup():
1) If any of the event mapping DT property is absent or too small
then don't skip parsing of other DT properties.
2) Return failure if sbi_pmu_add_hw_event_counter_map() fails.
3) Return failure if sbi_pmu_add_raw_event_counter_map() fails.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Factor out the common code used by the fdt UART node parsers,
allowing us to drop duplicate code.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The function returns the highest hart-id of the harts actually used in
the system (enabled). Change the name to reflect this fact.
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
If an FDT node contains a "status" property and this property is not
"ok" or "okay", this node should be ignored. Introduce a function that
checks this.
Signed-off-by: Jan Remes <jan.remes@codasip.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since past few years, we have been using "hart features" in OpenSBI
to represent all optionalities and multi-letter extensions defined
by the RISC-V specifications.
The RISC-V profiles specification has taken a different approach and
started assigning extension names for all optionalities which did not
have any extension name previously.
(Refer, https://github.com/riscv/riscv-profiles/blob/main/profiles.adoc)
Inspired from the RISC-V profiles specification, we convert OpenSBI
hart features into hart extensions. Going forward, we align the
extension naming with RISC-V profiles specification. Currently, only
"time CSR" and "AIA CSR" have not been assigned extension name but
for everything else we have a name.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
reg-offset property is used for offset to apply to the mapbase
from the start of the registers in 8250 UART. In Linux kernel,
it has been handled in 8250 UART driver.
dt-bindings:
<linux>/Documentation/devicetree/bindings/serial/8250.yaml
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Initial commit of the xlnx-uartlite device and FDT support. This was
tested by running OpenSBI on a modified QEMU virt machine using the
xlnx-uartlite for serial.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
We should disable APLIC DT nodes in fdt_fixups() which are not
accessible to the next booting stage based on currently assigned
domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple FDT irqchip driver for APLIC so that generic platform (and
other FDT based platforms) can utilize common APLIC initialization library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We should disable IMSIC DT nodes in fdt_fixups() which are not
accessible to the next booting stage based on currently assigned
domain.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple FDT irqchip driver for IMSIC so that generic platform
(and other FDT based platforms) can utilize common IMIC library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
RISC-V privilege specification does not specify how to encode the event ID.
Therefore, each platform is allowed to customize its own encoding rule.
The common encoding methods are as follow, directly assigning a number to an
event, or every bit in the mphmevent CSR controls one specified event or
mixes the above two methods.
To enable OpenSBI to support the above three encoding methods simultaneously,
this patch repurpose the dt property "riscv,raw-event-to-mhpmcounters". The
"riscv,raw-event-to-mhpmcounters" will describes the one or multiple raw
events that could be counted by a set of counters. But, the column number
of "riscv,raw-event-to-mhpmcounters" is extended from 2 to 3. The 1st column
(64bit) is the ID of the raw events. The 2nd column (64bit) represents a
select_mask now to represent the bits used for event ID encoding.
If a platform directly encodes each raw PMU event as a unique ID,
the value of select_mask will be 0xffffffff_ffffffff.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Atish Patra<atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As per the DT schema rules, the prefix should be vendor. As the PMU
properties are generic for all vendors, change the prefix to riscv
instead of pmu.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Some platforms such as hifive unmatched doesn't implement mcountinhibit
csr. However, it has hardware events that can be monitored using 2
hpmcounter it has (i.e. mhpmcounter3 & mhpmcounter4).
Currently, PMU extension disabled if mcountinhibit is absent. That's not
really necessary as long as the supervisor OS keeps track of the delta
value of the counters. Without mcountinhibit, the delta value won't be
entirely accurate because the counters are freely running. However, that
should be fine to produce an approximate counter value which can help
performance analysis. Perf sampling won't work though as sscof extension
is not present in hifive unmatched.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_timebase_frequency() function which can be used
by ACLINT mtimer driver and platform code to get timebase frequency.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The fdt_parse_aclint_node() is used to parse DT node for SiFive
CLINT, ACLINT MTIMER, and ACLINT MSWI devices.
The ACLINT MTIMER has undergone following changes:
1) MTIMER DT node now requires separate addresses in for MTIME
register and MTIMECMPx registers in the reg DT property.
2) MTIMER DT node might have no interrupts-extended DT property
when the MTIMER device has no associated HARTs (i.e. the
MTIMER device has no MTIMECMPx registers)
This patch extends fdt_parse_aclint_node() to handle above
mentioned changes in ACLINT MTIMER DT bindings.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add "index" parameter to fdt_get_node_addr_size() API so that
calling function can specify index of desired register set. This
will allow fdt_get_node_addr_size() to handle DT nodes with
multiple register sets.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The maximum address and size encoded in DT are 64-bit numbers, so we
should use uint64_t for 'addr' and 'size' in fdt_get_node_addr_size().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The libfdt project does not have a generic API to parse phandle
with args from a DT node so we add fdt_parse_phandle_with_args()
for this purpose. This new API will be useful to FDT based drivers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The PMU DT node bindings are defined in docs/pmu_support.md
Add few fdt helper functions to parse the DT node and update the
event-counter mapping tables.
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_aclint_node() which can parse both ACLINT and
CLINT DT nodes. This means fdt_parse_clint_node() is not required
anymore so we remove it as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Use strncmp() instead of strcmp() in __fixup_find_domain_offset()
so that it compiles fine when linking with external firmware (such
as EDK2).
Signed-off-by: Daniel Schaefer <daniel.schaefer@hpe.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch adds support for the UART used by the NOEL-V processor.
Cobham Gaisler's NOEL-V RISC-V processor IP is available under GPL
and commercial license and is described in more detail at
https://www.gaisler.com/noelv.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Figure out CLINT has_64bit_mmio from DT node and using antonym for
compatibility.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We should copy over all restricted memregions from the root domain
to the domains populated from FDT. These restricted root memregions
are typically firmware memregion and M-mode only mmio memregions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Current fdt_plic_fixup() only does necessary fix-up against the legacy
"riscv,plic0" node. The upstream Linux kernel defines its official DT
bindings which uses "sifive,plic-1.0.0" as the compatible string and
we should check that first, and if not present fall back to legacy.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
At present fdt_plic_fixup() accepts a 'compat' parameter for PLIC
compatible string. In preparation to support the new DT bindings,
drop this and use "riscv,plic0" directly in fdt_plic_fixup().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The fdt_domain_get() function is now redundant because the
fdt_domains_populate() function can explicitly register new
domains using the sbi_domain_register() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend fdt_iterate_each_domain() and fdt_iterate_each_memregion()
functions to allow underlying iteration function to fail. This will
help us catch more domain misconfiguration issues at boot time.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add various helper routines to populate domains, iterate domains,
iterate domain memregions, and parse HART to domain assignment from
the FDT.
These helper routines can be used by platform support code and FDT
fixup code.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The "reg" property in a device node may not be the correct address always.
If a parent node defines a "ranges" property, the child address need to be
translated with respect to parents address. If the ranges property is not
present, it will just use 1:1 translation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The fdt_cpu_fixup() should disable a HART in DT if the HART
is not assigned to the current HART domain. This patch updates
fdt_cpu_fixup() accordingly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that each HART is mapped to a domain having a set of memory
regions, we update fdt_reserved_memory_fixup() to use domain memory
regions for adding reserved memory nodes in device tree.
We also change reserved memory node name prefix from "mmode_pmp"
to "mmode_resv" because domain memory regions can impact other
hardware configurations (such as IOPMP, etc) along with PMP.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_cpu_fixup() should work fine even if HARTs without MMU
are not marked invalid by platform support code.
In future, we plan to treat HARTs without MMU as valid in the
generic platform support so that we can hold these HARTs in
HSM STOPPED state.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The SBI_HART_HAS_PMP feature is redundant because we already
have number of PMP regions returned by sbi_hart_pmp_count().
Checking whether PMP is supported for a HART can be simply done
by checking non-zero value returned by sbi_hart_pmp_count().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Use strncmp instead of using sbi_strcmp directly in fdt_parse_hart_id()
to allow compiling fdt_helper.c by external firmware.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently 256 bytes is used for the FDT expand size when fixing up
reserved memory node. Increase it to 1024 bytes with an estimated
size of 64 bytes per PMP memory region by 16 regions in total.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
C-Class is a member of the SHAKTI family of processors from Indian
Institute of Technology - Madras(IIT-M).
It is an extremely configurable and commercial-grade 5-stage in-order
core supporting the standard RV64GCSUN ISA extensions.
https://gitlab.com/shaktiproject/cores/c-class/blob/master/README.md
We add OpenSBI support for Shakti C-class SoC.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This is achieved by removing the 'no-map' property from the
'reserved-memory' node when PMP is present, otherwise we keep it as it
offers a small protection if the OS does not map this region at all.
A new callback in platform_override is introduced and allows to fixup the
device-tree. It is used here to override this new default behaviour on
SiFive Fu540 platforms that has an erratum that prevents S-mode software
to access a PMP protected region using 1GB page table mapping.
If PMP is present, telling the OS not to map the reserved regions does not
add much protection since it only avoids access to regions that are already
protected by PMP. But by not allowing the OS to map those regions, it
creates holes in the OS system memory map and prevents the use of
hugepages which would generate, among other benefits, less TLB miss.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We add fdt_parse_clint_node() function which will be used by
fdt_ipi_clint and fdt_timer_clint drivers to parse CLINT details
from DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend fdt_find_match() implementation by adding node offset
parameter which represents the first node to match from.
The improved fdt_find_match() can be used to find multiple
match nodes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend all PLIC functions to have a "struct plic_data *"
parameter pointing to PLIC details. This allows platforms to
use these functions for multiple PLIC instances.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
