We do following improvements for get_feature_str():
1. We should return "none" from get_feature_str() no features
available instead of sbi_boot_prints() explicitly handling
failure.
2. We don't need to return failure (just like misa_xlen())
because we are returning "none" for no features and we are
truncating output when space is not available.
3. Based on 1 and 2, the sbi_boot_prints() can be further
simplified.
4. No need for two char[] in sbi_boot_prints()
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We have now clear distinction between platform and hart features.
Modify the boot print messages to print hart specific features in
a string format.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As per the RISC-V specification, time value can be obtained from a time
CSR implemented in hardware or a MMIO based IP block. Qemu virt machine
already supports timer csr while CLINT provides the timer for other
platforms.
Implement a hart specific timer feature that can be detected at runtime.
As CSR based timer implementation are faster than MMIO address based, it
is always preferred over MMIO based one.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
PMP & performance counters belong to a hart rather than a platform.
In addition to that, these features enable reading/writing from a
particular csr. Thus, they can be detected and set at runtime rather
than compile time.
Move PMP/MCOUNTEREN/SCOUNTEREN features to hart and detect them at runtime.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
There may be some features which are hart specific rather than a platform
specific feature. Add a framework to support that.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Unprivileged trap handler can be reused for any cases where the executing
code expects a trap.
Rename it to "expected" trap handler as it will be used in other cases in
future.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Jonathan Balkind <jbalkind@cs.princeton.edu>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This patch optimize unpriv load/store implementation by having
dedicated unpriv trap handler (just like KVM RISC-V).
As a result of this optimization:
1. We have reduced roughly 13+ instruction in all unpriv load/store
functions. The reduced instruction also include two function calls.
2. Per-HART trap info pointer in scratch space is now redundant
hence removed.
3. The sbi_trap_handler() is now much cleaner because we don't have
to handle unpriv load/store traps.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_current_hartid() being a regular function is quite
expensive because for callers it is a function call instead
of a direct CSR read. This patch converts sbi_current_hartid()
into a macro in riscv_asm.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_hart_id_to_scratch() just forwards call to firmware specific
hartid_to_scratch() callback so we make sbi_hart_id_to_scratch() as
macro in sbi_scratch.h instead of regular function in sbi_hart.c.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The HART available mask and related APIs are now totally redundant
because of more extensive HART state machine implemented by sbi_hsm.
Due to above, we remove HART available mask and related APIs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The coldboot wait APIs are only used by sbi_init.c so no point in
having coldboot related code in sbi_hart.c.
As per-above rationale, we move all coldboot wait related APIs to
sbi_init.c as static/local functions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This patch adds support for hart hotplug in OpenSBI using a generic WFI
based approach. Hart hotplug can be achieved via SBI HSM extension which
allows supervisor mode software to start or stop any harts anytime.
Any platform wishes to implement platform specific hart hotplug must
implement both hart_start and hart_stop in addition to enable platform
feature SBI_PLATFORM_HAS_HART_HOTPLUG.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We print MIDELEG and MEDELEG CSRs as part of boot prints so that
boot log shows the interrupts and exceptions delegated to S-mode.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This patch extends sbi_hart_switch_mode() to support entering
VS/VU modes when hypervisor extension is available.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
This patch adds per-HART trap info pointer which can be used to
communicate trap information to sbi_trap_handler().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Cleanup sbi_hart_boot_nexti() code, adding messages for clarity and
rename the function to sbi_hart_switch_mode() to reflect what the
function actually does.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Allow a platform to report its supported features in more details.
The new features defined are:
* SBI_PLATFORM_HAS_PMP
* SBI_PLATFORM_HAS_SCOUNTEREN
* SBI_PLATFORM_HAS_MCOUNTEREN
In addition, define the macro SBI_PLATFORM_DEFAULT_FEATURES as the set
of features that are generally expected to be supported by a Linux
capable platform.
Operations touching the features controlled with these falgs are not
executed if the platform does not set the corresponding feature flags.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
