We extend all PLIC functions to have a "struct plic_data *"
parameter pointing to PLIC details. This allows platforms to
use these functions for multiple PLIC instances.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The "target_hart" and "hart_count" parameters of PLIC cold and
warm init functions are only used for sanity checks and not
required in PLIC initialization.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We can achieve shutdown, cold reboot, and warm reboot using just
one sbi_platform callback so we combine system_reboot() and
system_shutdown() callbacks into one system_reset() callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The default (usually last) PMP region provides S-mode access to
complete memory range not covered by other PMP regions.
Currently, the default PMP region is described as platform specific
PMP region which is not appropriate because all platforms need it
and default PMP region should be part of generic library.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
FDT helper file contain both fdt fixup and parsing functions.
Split the fixup related functions to a separate file for a better code
organization.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The FU540_ENABLED_HART_MASK compile time option was added for initial
bring-up on SiFive Unleashed. This option is redundant now because
disabled_hart_mask is already removed. Based on this rationale, we
remove FU540_ENABLED_HART_MASK compile time option.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
A platform can have discontinuous and/or sparse HART ids so we
cannot always assume a set of HARTs with continuous HART ids.
This patch adds support for discontinuous and sparse HART ids by
introducing HART index to HART id table. This table has platform
hart_count entries and it maps HART index to HART id.
The HART index to HART id table has only two restrictions:
1. HART index < sbi_platform hart_count
2. HART id < SBI_HARTMASK_MAX_BITS
Example1:
Let's say we have a platform with 2 HART ids 11 and 22, for such a
a platform:
hart_count = 2
hart_index2id[0] = 11
hart_index2id[1] = 22
Example2:
Let's say we have a platform with 5 HARTs ids 0, 1, 2, 3, and 4
but out of these HART with id 0 is not usable so for such a platform:
hart_count = 5
hart_index2id[0] = -1U
hart_index2id[1] = 1
hart_index2id[2] = 2
hart_index2id[3] = 3
hart_index2id[4] = 4
OR
hart_count = 4
hart_index2id[0] = 1
hart_index2id[1] = 2
hart_index2id[2] = 3
hart_index2id[3] = 4
With HART index to HART id table in place, the hart_disabled()
callback is now redundant so we remove it as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Platform andes/ae350, ariane-fpga, qemu/virt and sifive/fu540 codes
have been updated to call this general DT fix-up helper.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This replaces the FU540 specific cpu0 node "status" property fix-up
with the newly introduced generic fdt_cpu_fixup() helper.
Unlike previous logic, the helper routine does not test the "mmu-type"
property to determine which node we should fix up, instead it uses
sbi_platform_hart_disabled() API.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
As of today the upstream U-Boot & Linux kernel ships a device tree
that already has "stdout-path" properly set in the "/chosen" node.
This is the same with the QEMU 'sifive_u' machine. Hence the codes
to fix up the "stdout-path" in OpenSBI is not necessary.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This calls fdt_reserved_memory_fixup() helper in the platform's
final_init() routine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Now that we have a dedicated fdt_helper.c file for DT releated
helper routines, move plic_fdt_fixup() codes from plic.c to
fdt_helper.c and rename it to fdt_plic_fixup() at the same time,
to keep name consistency in the same file.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Adjust the order of include header files in alphabetical order in
platform codes. Also remove unnecessary inclusions.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
As of today all platforms use 8KB of per-HART stack hence there is
no need for each platform to define its own macro or use the magic
number. Create one macro for all platforms. Platform still can use
its own version if needed.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The sbi_current_hartid() being a regular function is quite
expensive because for callers it is a function call instead
of a direct CSR read. This patch converts sbi_current_hartid()
into a macro in riscv_asm.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The disabled_hard_mask in sbi_platform is only 64bits wide so we
cannot disable a HART with HARTID > 63. To tackle this, we remove
disabled_hart_mask and replace it with hart_disabled() platform
callback.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
There has already been a commit to master which added 32-bit specific
fdt/payload addresses for the sifive/fu540 platform [0]. This commit
introduces another change for using sifive/fu540 as a 32-bit platform.
On 32-bit platforms, cores with the SV32 MMU type should not be
disabled. For this reason, this commit also allows using this MMU type
on the sifive/fu540 platform.
Alternatively it would also be possible to only allow SV39 and SV48 if
`__riscv_xlen == 64` and SV32 if `__riscv_xlen == 32`. Removing the
check entirely would also be an option.
[0]: 66fb729a1e
Signed-off-by: Sören Tempel <tempel@uni-bremen.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
It was reported that tlb range flush is not working on fu540.
Only tlb full flush seems to work on fu540 probably due to some
hardware errata.
Set the tlb flush limit to zero so that all tlb flush requests
are converted to full flush.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
It is possible to have a CLINT implementation which supports
only 32bit MMIO accesses on RV64 system so this patch extends
our CLINT driver such that platform code can specify whether
CLINT supports 64bit MMIO access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra<atish.patra@wdc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
OpenSBI manages outstanding TLB flush requests by queueing
them in a fifo synchronously. An ipi sync which uses an
atomic operation on MMIO address is no longer required.
Remove the ipi sync method from platform header and all usage.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We should expand the FDT size before any patching, otherwise it's
possible the "status" fix up might fail due to insufficient space.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Per device tree spec, the standard value string for the "status"
property of a cpu node is either "okay" or "disabled". "masked"
was once used but it is unfortunately a spec violation.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
Add version control of sbi_platform structure
- Add opensbi_version, this gives information of opensbi revision on
which the sbi_platform table was created.
- Add platform_version field in sbi_platform structure for platform
level version control.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
Move platform opensbi functions to sbi_platform_operations structure.
Both sbi_platform and sbi_platform_operations structures are maintained
by platform vendors.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
Currently, platform/common contains platform/non-platform specific
common minimal drivers and libraries. This is helpful is all platforms
are built within opensbi framework.
Move them to lib/utils so that any external platform code also can
reuse the minimalistic drivers or other common libraries.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <olof@lixom.net>
One of the shortcomings of clang-format is that it doesn't allow
for aligned define tables, which is used for a number of constants.
Add annotation to disable the automatic formatting where needed.
Signed-off-by: Olof Johansson <olof@lixom.net>
There are some spaces or mixed usage of spaces and tabs in the macro
definition. Change to use tab consistently.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Currently, only hart 1 is enabled for fu540 platform to support U-boot.
Introduce a compile time FU540_ENABLED_HART_MASK option so that specific
harts can be selected for booting. As fu540 is a multicore, we should
boot all cores by default except hart 0.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <anup.patel@wdc.com>
For better naming, we rename ipi_inject() to ipi_send() in
struct sbi_platform. We also replace term "inject" with
"send" in all related places.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The target_hart and hartid paramter of TIMER callbacks is not
required because it always current hartid which can be obtained
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The hartid parameter in IRQCHIP callbacks of sbi_platform
is not required because current hartid can be determined
using sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
The source_hart and hartid parameter is really not required in
IPI callbacks of sbi_platform because current hartid can always
be obtained by calling sbi_current_hartid() API.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
PLIC DT entry fixup can be done by comparing external
interrupt number instead of context id. No need to invoke
fixup for each plic context.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Perform following DT updates.
1. Mask hart if mmu is not supported.
2. Add stdout-path under chosen node.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
We rename sifive/hifive_u540 platform support to sifive/fu540
to match the SoC name which is SiFive FU540 (as-per user manual).
In fact, we can expect no (or very minimal) board specific
quirks in sifive/fu540 platform support. These board specific
quirks can be turned on/off in-future using PLATFORM_<xyz>
make command-line option.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
