The upstream U-Boot/QEMU have been using generic platform for SiFive
HiFive Unleashed board for some time. Let's document sifive_fu540 as
one of the supported targets for "generic" platform.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
With latest U-Boot upstream (v2021.07 in development), the defconfig
name has been changed to sifive_unleashed_defconfig. Update the doc.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The FW_PAYLOAD_FDT_PATH compile-time option is replaced by
FW_FDT_PATH compile-time option which is more flexible and
common across all OpenSBI firmwares.
This patch removes FW_PAYLOAD_FDT_PATH and updates related
documentation to use FW_FDT_PATH.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
U-Boot v2020.07 release adds SPL support to SiFive HiFive Unleashed.
Update the doc to mention that detailed build instructions are in the
U-Boot doc.
This also adds detailed command line description to show how to boot
U-Boot v2020.07 S-mode payload in the QEMU chapter.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
U-Boot now supports loading Linux kernel image via network and storage
media. Thus, we don't need to use a combined payload containing both
U-Boot & Linux kernel image to boot Linux from U-Boot prompt.
Remove the old documentation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The FU540_ENABLED_HART_MASK compile time option was added for initial
bring-up on SiFive Unleashed. This option is redundant now because
disabled_hart_mask is already removed. Based on this rationale, we
remove FU540_ENABLED_HART_MASK compile time option.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
For testing 32-bit SiFive specific drivers with QEMU riscv32, add
32-bit specific FW_JUMP_FDT_ADDR and FW_PAYLOAD_OFFSET.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
- make title underline the same length as the title itself
- put all URLs at the end of the doc
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Document that when U-Boot v2020.01 (or higher) is used as the payload,
we need adjust the instructions a little bit when testing OpenSBI with
QEMU 'sifive_u' machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
With U-Boot v2020.01, the SiFive FU540 DTB required by U-Boot is
embedded in U-Boot binary itself so we don't need to do anything
special for U-Boot v2020.01 as payload to OpenSBI firmware.
This patch updates SiFive FU540 documenation assuming we use
latest U-Boot v2020.01 release.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
With QEMU v4.2 release that has improved the emulation fidelity
of 'sifive_u' machine, OpenSBI v0.4 / U-Boot v2019.10-rc1 / Linux
kernel v5.3-rc2 images built for the SiFive HiFive Unleashed board
can be used out of the box without any special hack.
Update our documents to mention 'qemu/sifive_u' platform should
only be used with QEMU v4.1 or before, and it will be dropped
sometime in the future release.
Going forward, 'sifive/fu540' platform can be used on both real
hardware and QEMU v4.2+ 'sifive_u' machine.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
U-Boot readme for fu540 platform suggest that fdt_addr_r should be used
as DT address after DT is copied via tftpboot.
Update the OpenSBI docs to reflect that. Remove other stale informations
as well.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The Linux kernel will maintain the device tree (DT) for HiFive Unleashed
from release v5.2-rc6. This DT is incompatible with previous DT
present for Microsemi expansion board in OpenSBI.
Since, OpenSBI will directly load the pre-built DTB from kernel now onwards,
no need to keep the out-of-date DT in openSBI. Remove this DT and
it's related documentation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
With 5.2-rc6 release, Linux kernel hosts the DT for Unleashed board
which is incompatible with the default DT from FSBL.
Update the document to use the DT from kernel.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
All dependant patches are merged in U-Boot and Linux kernel now.
Update the unleashed guide to reflect that and fix the documentation
about tftp loading path as well.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Following updates to fu540 platform guide.
1. Update a section about flashing the firmware binary
to sdcard with correct partition identifier.
2. Refer the individual payload section.
3. Update uboot booting section.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
