As per the PLIC specification, maximum priority threshold value is 0x7.
Even though, writing a higher value doesn't cause any error in qemu
hifive unleashed, there may be some implementation which checks the upper
and may result in an illegal access.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Currently, the fdt_cpu_fixup() implementation assumes:
1. We have one CPU DT for each HART under /cpus DT node
2. The CPU DT nodes are named sequentially (i.e cpu@0,
cpu@1, ...) which is not true for discontinuous and
sparse HART ids (i.e. cpu@0, cpu@4, cpu@5). Generally,
CPU DT node are named based on HART id and not HART
index
If any of the above assumptions are violated then the
fdt_cpu_fixup() will not work.
This improves fdt_cpu_fixup() implementation and makes
it independent of above assumptions.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
FDT helper file contain both fdt fixup and parsing functions.
Split the fixup related functions to a separate file for a better code
organization.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Different DT based platforms from the sam family may reuse IP blocks with
different configurations. These different configurations can be obtained
by parsing the device tree.
Add a FDT parser framework that can parse various device configurations from
device tree. Currently, the parsing algorithms doesn't cover all the use cases
or possible combination of DT configurations. It will be improved over time.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
A platform can have discontinuous and/or sparse HART ids so we
cannot always assume a set of HARTs with continuous HART ids.
This patch adds support for discontinuous and sparse HART ids by
introducing HART index to HART id table. This table has platform
hart_count entries and it maps HART index to HART id.
The HART index to HART id table has only two restrictions:
1. HART index < sbi_platform hart_count
2. HART id < SBI_HARTMASK_MAX_BITS
Example1:
Let's say we have a platform with 2 HART ids 11 and 22, for such a
a platform:
hart_count = 2
hart_index2id[0] = 11
hart_index2id[1] = 22
Example2:
Let's say we have a platform with 5 HARTs ids 0, 1, 2, 3, and 4
but out of these HART with id 0 is not usable so for such a platform:
hart_count = 5
hart_index2id[0] = -1U
hart_index2id[1] = 1
hart_index2id[2] = 2
hart_index2id[3] = 3
hart_index2id[4] = 4
OR
hart_count = 4
hart_index2id[0] = 1
hart_index2id[1] = 2
hart_index2id[2] = 3
hart_index2id[3] = 4
With HART index to HART id table in place, the hart_disabled()
callback is now redundant so we remove it as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
This adds a general device tree fix-up helper to do all required
device tree fix-ups for a typical platform.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Add a helper routine to updates the "status" property of a CPU node
in the device tree to "disabled" if that hart is in disabled state.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Now that we have a dedicated fdt_helper.c file for DT releated
helper routines, move plic_fdt_fixup() codes from plic.c to
fdt_helper.c and rename it to fdt_plic_fixup() at the same time,
to keep name consistency in the same file.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Add a helper routine to insert a child node of the reserved memory
node in the device tree that describes the protected memory region
done by OpenSBI via PMP.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Pull fdt_addresses.o in for fdt_address_cells() & fdt_size_cells().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The sbi_current_hartid() being a regular function is quite
expensive because for callers it is a function call instead
of a direct CSR read. This patch converts sbi_current_hartid()
into a macro in riscv_asm.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Add two macros in preparation to sync libfdt codes to latest v1.5.1
release from upstream.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This fixes various coding style issues found in the serial codes.
No functional changes.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
When building 32-bit OpenSBI images, we get:
lib/utils/sys/htif.c: In function '__check_fromhost':
lib/utils/sys/htif.c:12:31: error: left shift count >= width of type
[-Werror=shift-count-overflow]
#define HTIF_DATA_MASK ((1UL << HTIF_DATA_BITS) - 1)
^~
Fixes: c2f23cc6ed ("platform: Add Spike initial support")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
To initialize PLIC in sane state, we should:
1. set maximum threshold value of M-mode PLIC contexts
2. set maximum threshold value of S-mode PLIC contexts
3. set irq priorities to miniumum
Fix the comment and initialize the threshold/priorities correctly.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
It is possible to have a CLINT implementation which supports
only 32bit MMIO accesses on RV64 system so this patch extends
our CLINT driver such that platform code can specify whether
CLINT supports 64bit MMIO access.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra<atish.patra@wdc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
To read 64bit time in 32 bit we have to read lower & upper half
separately and 'or' them together. However, upper half time may
have changed by the time we read lower half. Thus, the resultant
64 bit time may not be accurate.
Consider lower half time value only if upper half time value has
not changed.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
OpenSBI manages outstanding TLB flush requests by queueing
them in a fifo synchronously. An ipi sync which uses an
atomic operation on MMIO address is no longer required.
Remove the ipi sync method from platform header and all usage.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The error check 'plic_off < 0' does nothing, since plic_off is stored as
a u32. Fix this by changing it to an int, which matches the return type of
fdt_node_offset_by_compatible().
Signed-off-by: Jacob Garber <jgarber1@ualberta.ca>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Although it does not make a functional difference, both cpu_to_fdt32()
and fdt32_to_cpu() pass on to CPU_TO_FDT32, we should use cpu_to_fdt32()
to be semantically correct.
Signed-off-by: Georg Kotheimer <georg.kotheimer@kernkonzept.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
tinyfdt.c was originally added to provide a minimal implementation of
fdt parsing. However, we have already included libfdt in OpenSBI for
more complicated operations.
Remove tinfdt and replace its functiolity using libfdt.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
The drivers and libfdt are built as libsbiutils.a
instead of libplatsbi.a.
libsbiutils.a are not built per platform specific. Thus,
enable all drivers by default.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
All string functions are part of libsbi. It makes more sense
to rename them to sbi_string.x as the libsbi can be linked
with external libraries that can have similar implementation.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
Currently, platform/common contains platform/non-platform specific
common minimal drivers and libraries. This is helpful is all platforms
are built within opensbi framework.
Move them to lib/utils so that any external platform code also can
reuse the minimalistic drivers or other common libraries.
This patch doesn't introduce any functional changes.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Anup Patel <anup.patel@wdc.com>
