forked from Firmware/Firmwares
256 lines
7.2 KiB
C
256 lines
7.2 KiB
C
// See LICENSE for license details.
|
|
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include "platform.h"
|
|
#include <string.h>
|
|
#include "plic/plic_driver.h"
|
|
#include "encoding.h"
|
|
#include <unistd.h>
|
|
#include "stdatomic.h"
|
|
|
|
void reset_demo (void);
|
|
|
|
// Structures for registering different interrupt handlers
|
|
// for different parts of the application.
|
|
typedef void (*function_ptr_t) (void);
|
|
|
|
void no_interrupt_handler (void) {};
|
|
|
|
function_ptr_t g_ext_interrupt_handlers[PLIC_NUM_INTERRUPTS];
|
|
|
|
|
|
// Instance data for the PLIC.
|
|
|
|
plic_instance_t g_plic;
|
|
|
|
|
|
/*Entry Point for PLIC Interrupt Handler*/
|
|
void handle_m_ext_interrupt(){
|
|
plic_source int_num = PLIC_claim_interrupt(&g_plic);
|
|
if ((int_num >=1 ) && (int_num < PLIC_NUM_INTERRUPTS)) {
|
|
g_ext_interrupt_handlers[int_num]();
|
|
}
|
|
else {
|
|
exit(1 + (uintptr_t) int_num);
|
|
}
|
|
PLIC_complete_interrupt(&g_plic, int_num);
|
|
}
|
|
|
|
|
|
/*Entry Point for Machine Timer Interrupt Handler*/
|
|
void handle_m_time_interrupt(){
|
|
|
|
clear_csr(mie, MIP_MTIP);
|
|
|
|
// Reset the timer for 3s in the future.
|
|
// This also clears the existing timer interrupt.
|
|
|
|
volatile uint64_t * mtime = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIME);
|
|
volatile uint64_t * mtimecmp = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIMECMP);
|
|
uint64_t now = *mtime;
|
|
uint64_t then = now + 2 * RTC_FREQ;
|
|
*mtimecmp = then;
|
|
|
|
// read the current value of the LEDS and invert them.
|
|
uint32_t leds = GPIO_REG(GPIO_OUTPUT_VAL);
|
|
|
|
GPIO_REG(GPIO_OUTPUT_VAL) ^= ((0x1 << RED_LED_OFFSET) |
|
|
(0x1 << GREEN_LED_OFFSET) |
|
|
(0x1 << BLUE_LED_OFFSET));
|
|
|
|
// Re-enable the timer interrupt.
|
|
set_csr(mie, MIP_MTIP);
|
|
|
|
}
|
|
|
|
|
|
const char * instructions_msg = " \
|
|
\n\
|
|
SIFIVE, INC.\n\
|
|
\n\
|
|
5555555555555555555555555\n\
|
|
5555 5555\n\
|
|
5555 5555\n\
|
|
5555 5555\n\
|
|
5555 5555555555555555555555\n\
|
|
5555 555555555555555555555555\n\
|
|
5555 5555\n\
|
|
5555 5555\n\
|
|
5555 5555\n\
|
|
5555555555555555555555555555 55555\n\
|
|
55555 555555555 55555\n\
|
|
55555 55555 55555\n\
|
|
55555 5 55555\n\
|
|
55555 55555\n\
|
|
55555 55555\n\
|
|
55555 55555\n\
|
|
55555 55555\n\
|
|
55555 55555\n\
|
|
555555555\n\
|
|
55555\n\
|
|
5\n\
|
|
\n\
|
|
SiFive E-Series Software Development Kit 'demo_gpio' program.\n\
|
|
Every 2 second, the Timer Interrupt will invert the LEDs.\n\
|
|
(Arty Dev Kit Only): Press Buttons 0, 1, 2 to Set the LEDs.\n\
|
|
Pin 19 (HiFive1) or A5 (Arty Dev Kit) is being bit-banged\n\
|
|
for GPIO speed demonstration.\n\
|
|
\n\
|
|
";
|
|
|
|
void print_instructions() {
|
|
|
|
write (STDOUT_FILENO, instructions_msg, strlen(instructions_msg));
|
|
|
|
}
|
|
|
|
#ifdef HAS_BOARD_BUTTONS
|
|
void button_0_handler(void) {
|
|
|
|
// Red LED on
|
|
GPIO_REG(GPIO_OUTPUT_VAL) |= (0x1 << RED_LED_OFFSET);
|
|
|
|
// Clear the GPIO Pending interrupt by writing 1.
|
|
GPIO_REG(GPIO_RISE_IP) = (0x1 << BUTTON_0_OFFSET);
|
|
|
|
};
|
|
|
|
void button_1_handler(void) {
|
|
|
|
// Green LED On
|
|
GPIO_REG(GPIO_OUTPUT_VAL) |= (1 << GREEN_LED_OFFSET);
|
|
|
|
// Clear the GPIO Pending interrupt by writing 1.
|
|
GPIO_REG(GPIO_RISE_IP) = (0x1 << BUTTON_1_OFFSET);
|
|
|
|
};
|
|
|
|
|
|
void button_2_handler(void) {
|
|
|
|
// Blue LED On
|
|
GPIO_REG(GPIO_OUTPUT_VAL) |= (1 << BLUE_LED_OFFSET);
|
|
|
|
GPIO_REG(GPIO_RISE_IP) = (0x1 << BUTTON_2_OFFSET);
|
|
|
|
};
|
|
#endif
|
|
|
|
void reset_demo (){
|
|
|
|
// Disable the machine & timer interrupts until setup is done.
|
|
|
|
clear_csr(mie, MIP_MEIP);
|
|
clear_csr(mie, MIP_MTIP);
|
|
|
|
for (int ii = 0; ii < PLIC_NUM_INTERRUPTS; ii ++){
|
|
g_ext_interrupt_handlers[ii] = no_interrupt_handler;
|
|
}
|
|
|
|
#ifdef HAS_BOARD_BUTTONS
|
|
g_ext_interrupt_handlers[INT_DEVICE_BUTTON_0] = button_0_handler;
|
|
g_ext_interrupt_handlers[INT_DEVICE_BUTTON_1] = button_1_handler;
|
|
g_ext_interrupt_handlers[INT_DEVICE_BUTTON_2] = button_2_handler;
|
|
#endif
|
|
|
|
print_instructions();
|
|
|
|
#ifdef HAS_BOARD_BUTTONS
|
|
|
|
// Have to enable the interrupt both at the GPIO level,
|
|
// and at the PLIC level.
|
|
PLIC_enable_interrupt (&g_plic, INT_DEVICE_BUTTON_0);
|
|
PLIC_enable_interrupt (&g_plic, INT_DEVICE_BUTTON_1);
|
|
PLIC_enable_interrupt (&g_plic, INT_DEVICE_BUTTON_2);
|
|
|
|
// Priority must be set > 0 to trigger the interrupt.
|
|
PLIC_set_priority(&g_plic, INT_DEVICE_BUTTON_0, 1);
|
|
PLIC_set_priority(&g_plic, INT_DEVICE_BUTTON_1, 1);
|
|
PLIC_set_priority(&g_plic, INT_DEVICE_BUTTON_2, 1);
|
|
|
|
GPIO_REG(GPIO_RISE_IE) |= (1 << BUTTON_0_OFFSET);
|
|
GPIO_REG(GPIO_RISE_IE) |= (1 << BUTTON_1_OFFSET);
|
|
GPIO_REG(GPIO_RISE_IE) |= (1 << BUTTON_2_OFFSET);
|
|
|
|
#endif
|
|
|
|
// Set the machine timer to go off in 3 seconds.
|
|
// The
|
|
volatile uint64_t * mtime = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIME);
|
|
volatile uint64_t * mtimecmp = (uint64_t*) (CLINT_CTRL_ADDR + CLINT_MTIMECMP);
|
|
uint64_t now = *mtime;
|
|
uint64_t then = now + 2*RTC_FREQ;
|
|
*mtimecmp = then;
|
|
|
|
// Enable the Machine-External bit in MIE
|
|
set_csr(mie, MIP_MEIP);
|
|
|
|
// Enable the Machine-Timer bit in MIE
|
|
set_csr(mie, MIP_MTIP);
|
|
|
|
// Enable interrupts in general.
|
|
set_csr(mstatus, MSTATUS_MIE);
|
|
}
|
|
|
|
int main(int argc, char **argv)
|
|
{
|
|
// Set up the GPIOs such that the LED GPIO
|
|
// can be used as both Inputs and Outputs.
|
|
|
|
|
|
#ifdef HAS_BOARD_BUTTONS
|
|
GPIO_REG(GPIO_OUTPUT_EN) &= ~((0x1 << BUTTON_0_OFFSET) | (0x1 << BUTTON_1_OFFSET) | (0x1 << BUTTON_2_OFFSET));
|
|
GPIO_REG(GPIO_PULLUP_EN) &= ~((0x1 << BUTTON_0_OFFSET) | (0x1 << BUTTON_1_OFFSET) | (0x1 << BUTTON_2_OFFSET));
|
|
GPIO_REG(GPIO_INPUT_EN) |= ((0x1 << BUTTON_0_OFFSET) | (0x1 << BUTTON_1_OFFSET) | (0x1 << BUTTON_2_OFFSET));
|
|
#endif
|
|
|
|
GPIO_REG(GPIO_INPUT_EN) &= ~((0x1<< RED_LED_OFFSET) | (0x1<< GREEN_LED_OFFSET) | (0x1 << BLUE_LED_OFFSET)) ;
|
|
GPIO_REG(GPIO_OUTPUT_EN) |= ((0x1<< RED_LED_OFFSET)| (0x1<< GREEN_LED_OFFSET) | (0x1 << BLUE_LED_OFFSET)) ;
|
|
GPIO_REG(GPIO_OUTPUT_VAL) |= (0x1 << BLUE_LED_OFFSET) ;
|
|
GPIO_REG(GPIO_OUTPUT_VAL) &= ~((0x1<< RED_LED_OFFSET) | (0x1<< GREEN_LED_OFFSET)) ;
|
|
|
|
|
|
// For Bit-banging with Atomics demo.
|
|
|
|
uint32_t bitbang_mask = 0;
|
|
#ifdef _SIFIVE_HIFIVE1_H
|
|
bitbang_mask = (1 << PIN_19_OFFSET);
|
|
#else
|
|
#ifdef _SIFIVE_COREPLEXIP_ARTY_H
|
|
bitbang_mask = (0x1 << JA_0_OFFSET);
|
|
#endif
|
|
#endif
|
|
|
|
GPIO_REG(GPIO_OUTPUT_EN) |= bitbang_mask;
|
|
|
|
/**************************************************************************
|
|
* Set up the PLIC
|
|
*
|
|
*************************************************************************/
|
|
PLIC_init(&g_plic,
|
|
PLIC_CTRL_ADDR,
|
|
PLIC_NUM_INTERRUPTS,
|
|
PLIC_NUM_PRIORITIES);
|
|
|
|
reset_demo();
|
|
|
|
/**************************************************************************
|
|
* Demonstrate fast GPIO bit-banging.
|
|
* One can bang it faster than this if you know
|
|
* the entire OUTPUT_VAL that you want to write, but
|
|
* Atomics give a quick way to control a single bit.
|
|
*************************************************************************/
|
|
// For Bit-banging with Atomics demo.
|
|
uint32_t cnt=0;
|
|
while(cnt<200){
|
|
asm volatile ("wfi");
|
|
printf("Finished run#%u\n", ++cnt);
|
|
for(size_t i=0; i<100; ++i)
|
|
atomic_fetch_xor_explicit(&GPIO_REG(GPIO_OUTPUT_VAL), bitbang_mask, memory_order_relaxed);
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|