forked from Firmware/Firmwares
80 lines
2.2 KiB
C
80 lines
2.2 KiB
C
// See LICENSE file for license details
|
|
|
|
#ifndef _FE300PRCI_DRIVER_H_
|
|
#define _FE300PRCI_DRIVER_H_
|
|
|
|
__BEGIN_DECLS
|
|
|
|
#include <unistd.h>
|
|
|
|
typedef enum prci_freq_target {
|
|
|
|
PRCI_FREQ_OVERSHOOT,
|
|
PRCI_FREQ_CLOSEST,
|
|
PRCI_FREQ_UNDERSHOOT
|
|
|
|
} PRCI_freq_target;
|
|
|
|
/* Measure and return the approximate frequency of the
|
|
* CPU, as given by measuring the mcycle counter against
|
|
* the mtime ticks.
|
|
*/
|
|
uint32_t PRCI_measure_mcycle_freq(uint32_t mtime_ticks, uint32_t mtime_freq);
|
|
|
|
/* Safely switch over to the HFROSC using the given div
|
|
* and trim settings.
|
|
*/
|
|
void PRCI_use_hfrosc(int div, int trim);
|
|
|
|
/* Safely switch over to the 16MHz HFXOSC,
|
|
* applying the finaldiv clock divider (1 is the lowest
|
|
* legal value).
|
|
*/
|
|
void PRCI_use_hfxosc(uint32_t finaldiv);
|
|
|
|
/* Safely switch over to the PLL using the given
|
|
* settings.
|
|
*
|
|
* Note that not all combinations of the inputs are actually
|
|
* legal, and this function does not check for their
|
|
* legality ("safely" means that this function won't turn off
|
|
* or glitch the clock the CPU is actually running off, but
|
|
* doesn't protect against you making it too fast or slow.)
|
|
*/
|
|
|
|
void PRCI_use_pll(int refsel, int bypass,
|
|
int r, int f, int q, int finaldiv,
|
|
int hfroscdiv, int hfrosctrim);
|
|
|
|
/* Use the default clocks configured at reset.
|
|
* This is ~16Mhz HFROSC and turns off the LFROSC
|
|
* (on the current FE310 Dev Platforms, an external LFROSC is
|
|
* used as it is more power efficient).
|
|
*/
|
|
void PRCI_use_default_clocks();
|
|
|
|
/* This routine will adjust the HFROSC trim
|
|
* while using HFROSC as the clock source,
|
|
* measure the resulting frequency, then
|
|
* use it as the PLL clock source,
|
|
* in an attempt to get over, under, or close to the
|
|
* requested frequency. It returns the actual measured
|
|
* frequency.
|
|
*
|
|
* Note that the requested frequency must be within the
|
|
* range supported by the PLL so not all values are
|
|
* achievable with this function, and not all
|
|
* are guaranteed to actually work. The PLL
|
|
* is rated higher than the hardware.
|
|
*
|
|
* There is no check on the desired f_cpu frequency, it
|
|
* is up to the user to specify something reasonable.
|
|
*/
|
|
|
|
uint32_t PRCI_set_hfrosctrim_for_f_cpu(uint32_t f_cpu, PRCI_freq_target target);
|
|
|
|
__END_DECLS
|
|
|
|
#endif
|
|
|