Working version

hello-world/Makefile

@@ -5,11 +5,11 @@ C_SRCS  = $(wildcard *.c)
 #CFLAGS += -O2 
 
 BOARD=freedom-e300-hifive1
-LINK_TARGET=link
+LINK_TARGET=flash
 RISCV_ARCH=rv32imac
 RISCV_ABI=ilp32
 
-LDFLAGS = -march=$(RISCV_ARCH) -mabi=$(RISCV_ABI) -mcmodel=medany
+LDFLAGS = -Wl,--wrap=printf -march=$(RISCV_ARCH) -mabi=$(RISCV_ABI) -mcmodel=medany
 
 TOOL_DIR?=/opt/riscv/FreedomStudio/20180122/SiFive/riscv64-unknown-elf-gcc-20171231-x86_64-linux-centos6/bin
 BSP_BASE = ./bsp

hello-world/bsp/drivers/clic/clic_driver.c

@@ -0,0 +1,163 @@
+// See LICENSE for license details.
+
+#include "sifive/devices/clic.h"
+#include "clic/clic_driver.h"
+#include "platform.h"
+#include "encoding.h"
+#include <string.h>
+
+
+void volatile_memzero(uint8_t * base, unsigned int size) {
+  volatile uint8_t * ptr;
+  for (ptr = base; ptr < (base + size); ptr++){
+    *ptr = 0;
+  }
+}
+
+// Note that there are no assertions or bounds checking on these
+// parameter values.
+void clic_init (
+                clic_instance_t * this_clic,
+                uintptr_t hart_addr,
+                interrupt_function_ptr_t* vect_table,
+                interrupt_function_ptr_t default_handler,
+                uint32_t num_irq,
+                uint32_t num_config_bits
+                )
+{
+  this_clic->hart_addr=  hart_addr;
+  this_clic->vect_table= vect_table;
+  this_clic->num_config_bits= num_config_bits;
+
+  //initialize vector table
+  for(int i=0;i++;i<num_irq)  {
+    this_clic->vect_table[i] = default_handler;
+  }
+
+  //set base vectors
+  write_csr(mtvt, vect_table);
+
+
+  //clear all interrupt enables and pending
+  volatile_memzero((uint8_t*)(this_clic->hart_addr+CLIC_INTIE), num_irq);
+  volatile_memzero((uint8_t*)(this_clic->hart_addr+CLIC_INTIP), num_irq);
+
+  //clear nlbits and nvbits; all interrupts trap to level 15
+  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_CFG)=0;
+
+}
+
+void clic_install_handler (clic_instance_t * this_clic, uint32_t source, interrupt_function_ptr_t handler) {
+    this_clic->vect_table[source] = handler;
+}
+
+void clic_enable_interrupt (clic_instance_t * this_clic, uint32_t source) {
+    *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIE+source) = 1;
+}
+
+void clic_disable_interrupt (clic_instance_t * this_clic, uint32_t source){
+  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIE+source) = 0;
+}
+
+void clic_set_pending(clic_instance_t * this_clic, uint32_t source){
+  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIP+source) = 1;
+}
+
+void clic_clear_pending(clic_instance_t * this_clic, uint32_t source){
+  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTIP+source) = 0;
+}
+
+void clic_set_intcfg (clic_instance_t * this_clic, uint32_t source, uint32_t intcfg){
+  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTCFG+source) = intcfg;
+}
+
+uint8_t clic_get_intcfg  (clic_instance_t * this_clic, uint32_t source){
+  return *(volatile uint8_t*)(this_clic->hart_addr+CLIC_INTCFG+source);
+}
+
+void clic_set_cliccfg (clic_instance_t * this_clic, uint32_t cfg){
+  *(volatile uint8_t*)(this_clic->hart_addr+CLIC_CFG) = cfg;
+}
+
+uint8_t clic_get_cliccfg  (clic_instance_t * this_clic){
+  return *(volatile uint8_t*)(this_clic->hart_addr+CLIC_CFG);
+}
+
+//sets an interrupt level based encoding of nmbits, nlbits
+uint8_t clic_set_int_level( clic_instance_t * this_clic, uint32_t source, uint8_t level) {
+  //extract nlbits
+  uint8_t nlbits = clic_get_cliccfg(this_clic);
+  nlbits = (nlbits >>1) & 0x7;
+
+  //shift level right to mask off unused bits
+  level = level>>((this_clic->num_config_bits)-nlbits); //plus this_clic->nmbits which is always 0 for now.
+  //shift level into correct bit position
+  level = level << (8-this_clic->num_config_bits) + (this_clic->num_config_bits - nlbits);
+ 
+  //write to clicintcfg
+  uint8_t current_intcfg = clic_get_intcfg(this_clic, source);
+  clic_set_intcfg(this_clic, source, (current_intcfg | level));
+
+  return level;
+}
+
+//gets an interrupt level based encoding of nmbits, nlbits
+uint8_t clic_get_int_level( clic_instance_t * this_clic, uint32_t source) {
+  uint8_t level;
+  level = clic_get_intcfg(this_clic, source);
+
+  //extract nlbits
+  uint8_t nlbits = clic_get_cliccfg(this_clic);
+  nlbits = (nlbits >>1) & 0x7;
+
+  //shift level
+  level = level >> (8-(this_clic->num_config_bits));
+
+  //shift level right to mask off priority bits
+  level = level>>(this_clic->num_config_bits-nlbits); //this_clic->nmbits which is always 0 for now.
+
+  return level;
+}
+
+//sets an interrupt priority based encoding of nmbits, nlbits
+uint8_t clic_set_int_priority( clic_instance_t * this_clic, uint32_t source, uint8_t priority) {
+  //priority bits = num_config_bits - nlbits
+  //extract nlbits
+  uint8_t nlbits = clic_get_cliccfg(this_clic);
+  nlbits = (nlbits >>1) & 0x7;
+
+  uint8_t priority_bits = this_clic->num_config_bits-nlbits;
+  if(priority_bits = 0) {
+    //no bits to set
+    return 0;
+  }
+  //mask off unused bits
+  priority = priority >> (8-priority_bits);
+  //shift into the correct bit position
+  priority = priority << (8-(this_clic->num_config_bits));
+
+  //write to clicintcfg
+  uint8_t current_intcfg = clic_get_intcfg(this_clic, source);
+  clic_set_intcfg(this_clic, source, (current_intcfg | priority));
+  return current_intcfg;
+}
+
+//gets an interrupt priority based encoding of nmbits, nlbits
+uint8_t clic_get_int_priority( clic_instance_t * this_clic, uint32_t source) {
+  uint8_t priority;
+  priority = clic_get_intcfg(this_clic, source);
+
+  //extract nlbits
+  uint8_t nlbits = clic_get_cliccfg(this_clic);
+  nlbits = (nlbits >>1) & 0x7;
+
+  //shift left to mask off level bits
+  priority = priority << nlbits;
+
+  //shift priority
+  priority = priority >> (8-((this_clic->num_config_bits)+nlbits));
+
+ return priority;
+}
+
+

hello-world/bsp/drivers/clic/clic_driver.h

@@ -0,0 +1,44 @@
+// See LICENSE file for licence details
+
+#ifndef PLIC_DRIVER_H
+#define PLIC_DRIVER_H
+
+
+__BEGIN_DECLS
+
+#include "platform.h"
+
+typedef void (*interrupt_function_ptr_t) (void);
+
+typedef struct __clic_instance_t
+{
+  uintptr_t hart_addr;
+  interrupt_function_ptr_t* vect_table;
+  uint32_t num_config_bits;
+  uint32_t num_sources;  
+} clic_instance_t;
+
+// Note that there are no assertions or bounds checking on these
+// parameter values.
+void clic_init (clic_instance_t * this_clic, uintptr_t hart_addr, interrupt_function_ptr_t* vect_table, interrupt_function_ptr_t default_handler, uint32_t num_irq,uint32_t num_config_bits);
+void clic_install_handler (clic_instance_t * this_clic, uint32_t source, interrupt_function_ptr_t handler);
+void clic_enable_interrupt (clic_instance_t * this_clic, uint32_t source);
+void clic_disable_interrupt (clic_instance_t * this_clic, uint32_t source);
+void clic_set_pending(clic_instance_t * this_clic, uint32_t source);
+void clic_clear_pending(clic_instance_t * this_clic, uint32_t source);
+void clic_set_intcfg (clic_instance_t * this_clic, uint32_t source, uint32_t intcfg);
+uint8_t clic_get_intcfg (clic_instance_t * this_clic, uint32_t source);
+void clic_set_cliccfg (clic_instance_t * this_clic, uint32_t cfg);
+uint8_t clic_get_cliccfg  (clic_instance_t * this_clic);
+//sets an interrupt level based encoding of nmbits, nlbits
+uint8_t clic_set_int_level( clic_instance_t * this_clic, uint32_t source, uint8_t level);
+//get an interrupt level based encoding of nmbits, nlbits
+uint8_t clic_get_int_level( clic_instance_t * this_clic, uint32_t source);
+//sets an interrupt priority based encoding of nmbits, nlbits
+uint8_t clic_set_int_priority( clic_instance_t * this_clic, uint32_t source, uint8_t priority);
+//sets an interrupt priority based encoding of nmbits, nlbits
+uint8_t clic_get_int_priority( clic_instance_t * this_clic, uint32_t source);
+
+__END_DECLS
+
+#endif

hello-world/bsp/drivers/fe300prci/fe300prci_driver.c

@@ -2,7 +2,7 @@
 
 #include "platform.h"
 
-#ifdef PRCI_BASE_ADDR
+#ifdef PRCI_CTRL_ADDR
 #include "fe300prci/fe300prci_driver.h"
 #include <unistd.h>
 

hello-world/bsp/env/coreip-e2-arty/flash.lds

@@ -0,0 +1,161 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 64K
+}
+
+PHDRS
+{
+  flash PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >flash AT>flash :flash
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >flash AT>flash :flash
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >flash AT>flash :flash
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  .rodata         :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+  } >flash AT>flash :flash
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >flash AT>flash :flash
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >flash AT>flash :flash
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >flash AT>flash :flash
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >flash AT>flash :flash
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >flash AT>flash :flash
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >flash AT>flash :flash
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>flash :ram_init
+
+  .data          :
+  {
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>flash :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
+  {
+    PROVIDE( _heap_end = . );
+    . = __stack_size;
+    PROVIDE( _sp = . );
+  } >ram AT>ram :ram
+}

hello-world/bsp/env/coreip-e2-arty/init.c

@@ -0,0 +1,98 @@
+//See LICENSE for license details.
+#include <stdint.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#include "platform.h"
+#include "encoding.h"
+
+#define CPU_FREQ 32000000
+#define XSTR(x) #x
+#define STR(x) XSTR(x)
+
+extern int main(int argc, char** argv);
+
+unsigned long get_cpu_freq()
+{
+  return CPU_FREQ;
+}
+
+unsigned long get_timer_freq()
+{
+  return get_cpu_freq();
+}
+
+uint64_t get_timer_value()
+{
+#if __riscv_xlen == 32
+  while (1) {
+    uint32_t hi = read_csr(mcycleh);
+    uint32_t lo = read_csr(mcycle);
+    if (hi == read_csr(mcycleh))
+      return ((uint64_t)hi << 32) | lo;
+  }
+#else
+  return read_csr(mcycle);
+#endif
+}
+
+static void uart_init(size_t baud_rate)
+{
+  UART0_REG(UART_REG_DIV) = (get_cpu_freq() ) / baud_rate - 1;
+  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
+}
+
+
+typedef void (*interrupt_function_ptr_t) (void);
+interrupt_function_ptr_t localISR[CLIC_NUM_INTERRUPTS] __attribute__((aligned(64)));
+
+
+void trap_entry(void) __attribute__((interrupt, aligned(64)));
+void trap_entry(void)
+{
+  unsigned long mcause = read_csr(mcause);
+  unsigned long mepc = read_csr(mepc);
+  if (mcause & MCAUSE_INT)  {
+    localISR[mcause & MCAUSE_CAUSE] ();
+  } else {
+    while(1); 
+  }
+}
+
+#ifdef CLIC_DIRECT
+#else
+void default_handler(void)__attribute__((interrupt));;
+#endif
+void default_handler(void)
+{
+  puts("default handler\n");
+  while(1);
+}
+
+void _init()
+{
+#ifndef NO_INIT
+  uart_init(115200);
+
+  puts("core freq at " STR(CPU_FREQ) " Hz\n");
+
+//initialize vector table
+  int i=0;
+  while(i<CLIC_NUM_INTERRUPTS)	{
+    localISR[i++] = default_handler;
+  }
+  
+  write_csr(mtvt, localISR);
+
+#ifdef CLIC_DIRECT
+  write_csr(mtvec, ((unsigned long)&trap_entry | MTVEC_CLIC));
+#else
+  write_csr(mtvec, ((unsigned long)&trap_entry | MTVEC_CLIC_VECT));
+#endif
+
+#endif
+}
+
+void _fini()
+{
+}

hello-world/bsp/env/coreip-e2-arty/openocd.cfg

@@ -0,0 +1,31 @@
+# JTAG adapter setup
+adapter_khz     10000
+
+interface ftdi
+ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
+ftdi_vid_pid 0x15ba 0x002a
+
+ftdi_layout_init 0x0808 0x0a1b
+ftdi_layout_signal nSRST -oe 0x0200
+#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
+ftdi_layout_signal LED -data 0x0800
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
+
+set _TARGETNAME $_CHIPNAME.cpu
+
+target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
+$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+# Un-comment these two flash lines if you have a SPI flash and want to write
+# it.
+flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
+init
+if {[ info exists pulse_srst]} {
+  ftdi_set_signal nSRST 0
+  ftdi_set_signal nSRST z
+}
+halt
+#flash protect 0 64 last off
+echo "Ready for Remote Connections"

hello-world/bsp/env/coreip-e2-arty/platform.h

@@ -0,0 +1,98 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_PLATFORM_H
+#define _SIFIVE_PLATFORM_H
+
+// Some things missing from the official encoding.h
+
+#if __riscv_xlen == 32
+#define MCAUSE_INT         0x80000000UL
+#define MCAUSE_CAUSE       0x000003FFUL
+#else
+#define MCAUSE_INT         0x8000000000000000UL
+#define MCAUSE_CAUSE       0x00000000000003FFUL
+#endif
+
+#define MTVEC_DIRECT       0X00
+#define MTVEC_VECTORED     0x01
+#define MTVEC_CLIC         0x02
+#define MTVEC_CLIC_VECT    0X03
+
+
+#include "sifive/const.h"
+#include "sifive/devices/gpio.h"
+#include "sifive/devices/clint.h"
+#include "sifive/devices/clic.h"
+#include "sifive/devices/pwm.h"
+#include "sifive/devices/spi.h"
+#include "sifive/devices/uart.h"
+
+/****************************************************************************
+ * Platform definitions
+ *****************************************************************************/
+
+// Memory map
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
+#define CLIC_HART0_ADDR _AC(0x02800000,UL)
+#define GPIO_CTRL_ADDR _AC(0x20002000,UL)
+#define PWM0_CTRL_ADDR _AC(0x20005000,UL)
+#define RAM_MEM_ADDR _AC(0x80000000,UL)
+#define RAM_MEM_SIZE _AC(0x10000,UL)
+#define SPI0_CTRL_ADDR _AC(0x20004000,UL)
+#define SPI0_MEM_ADDR _AC(0x40000000,UL)
+#define SPI0_MEM_SIZE _AC(0x20000000,UL)
+#define TESTBENCH_MEM_ADDR _AC(0x20000000,UL)
+#define TESTBENCH_MEM_SIZE _AC(0x10000000,UL)
+//#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
+#define UART0_CTRL_ADDR _AC(0x20000000,UL)
+
+// IOF masks
+
+// Interrupt numbers
+#define RESERVED_INT_BASE 0
+#define UART0_INT_BASE 1
+#define EXTERNAL_INT_BASE 2
+#define SPI0_INT_BASE 6
+#define GPIO_INT_BASE 7
+#define PWM0_INT_BASE 23
+
+// Helper functions
+#define _REG64(p, i) (*(volatile uint64_t *)((p) + (i)))
+#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
+#define _REG16(p, i) (*(volatile uint16_t *)((p) + (i)))
+#define SET_BITS(reg, mask, value) if ((value) == 0) { (reg) &= ~(mask); } else { (reg) |= (mask); }
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
+#define CLIC0_REG(offset) _REG32(CLIC_HART0_ADDR, offset)
+#define CLIC0_REG8(offset)   (*(volatile uint8_t *)((CLIC_HART0_ADDR) + (offset)))
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
+#define CLIC0_REG64(offset) _REG64(CLIC_HART0_ADDR, offset)
+#define GPIO_REG64(offset) _REG64(GPIO_CTRL_ADDR, offset)
+#define PWM0_REG64(offset) _REG64(PWM0_CTRL_ADDR, offset)
+#define SPI0_REG64(offset) _REG64(SPI0_CTRL_ADDR, offset)
+#define UART0_REG64(offset) _REG64(UART0_CTRL_ADDR, offset)
+
+// Misc
+
+#define NUM_GPIO 16
+
+#define CLIC_NUM_INTERRUPTS 28 + 16
+
+#ifdef E20
+   #define CLIC_CONFIG_BITS 2
+#else
+   #define CLIC_CONFIG_BITS 4
+#endif
+
+#define HAS_BOARD_BUTTONS
+
+#include "coreplexip-arty.h"
+
+unsigned long get_cpu_freq(void);
+unsigned long get_timer_freq(void);
+uint64_t get_timer_value(void);
+
+#endif /* _SIFIVE_PLATFORM_H */

hello-world/bsp/env/coreip-e2-arty/settings.mk

@@ -0,0 +1,3 @@
+# Describes the CPU on this board to the rest of the SDK.
+RISCV_ARCH := rv32imac
+RISCV_ABI  := ilp32

hello-world/bsp/env/coreip-e2-arty/tim-split.lds

@@ -0,0 +1,157 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  flash (rxai!w) : ORIGIN = 0x80008000, LENGTH = 32K
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 32K
+}
+
+PHDRS
+{
+  flash PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >flash AT>flash :flash
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >flash AT>flash :flash
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >flash AT>flash :flash
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >flash AT>flash :flash
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >flash AT>flash :flash
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >flash AT>flash :flash
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >flash AT>flash :flash
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >flash AT>flash :flash
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >flash AT>flash :flash
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>flash :ram_init
+
+  .data          :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>flash :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
+  {
+    PROVIDE( _heap_end = . );
+    . = __stack_size;
+    PROVIDE( _sp = . );
+  } >ram AT>ram :ram
+}

hello-world/bsp/env/coreip-e2-arty/tim.lds

@@ -0,0 +1,161 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 64K
+}
+
+PHDRS
+{
+  ram PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >ram AT>ram :ram
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >ram AT>ram :ram
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >ram AT>ram :ram
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  .rodata         :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+  } >ram AT>ram :ram
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >ram AT>ram :ram
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >ram AT>ram :ram
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >ram AT>ram :ram
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >ram AT>ram :ram
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >ram AT>ram :ram
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >ram AT>ram :ram
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>ram :ram_init
+
+  .data          :
+  {
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>ram :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack :
+  {
+    . = ALIGN(8);
+    . += __stack_size;
+    PROVIDE( _sp = . );
+    PROVIDE( _heap_end = . );
+  } >ram AT>ram :ram
+}

hello-world/bsp/env/coreplexip-arty.h

@@ -0,0 +1,102 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_COREPLEXIP_ARTY_H
+#define _SIFIVE_COREPLEXIP_ARTY_H
+
+#include <stdint.h>
+
+/****************************************************************************
+ * GPIO Connections
+ *****************************************************************************/
+
+// These are the GPIO bit offsets for the directly driven
+// RGB LEDs on the Freedom Exx Coreplex IP Evaluation Arty FPGA Dev Kit.
+// Additional RGB LEDs are driven by the 3 PWM outputs.
+
+#define RED_LED_OFFSET   0
+#define GREEN_LED_OFFSET 1
+#define BLUE_LED_OFFSET  2
+
+// Switch 3 is used as a GPIO input. (Switch 0 is used to set
+// the reset vector, the other switches are unused).
+
+#define SW_3_OFFSET      3
+
+// These are the buttons which are mapped as inputs.
+
+#define HAS_BOARD_BUTTONS
+
+#define BUTTON_0_OFFSET  4
+#define BUTTON_1_OFFSET  5
+#define BUTTON_2_OFFSET  6
+#define BUTTON_3_OFFSET  7
+
+// These are the bit offsets for the different GPIO pins
+// mapped onto the PMOD A header.
+
+#define JA_0_OFFSET 8
+#define JA_1_OFFSET 9
+#define JA_2_OFFSET 10
+#define JA_3_OFFSET 11
+#define JA_4_OFFSET 12
+#define JA_5_OFFSET 13
+#define JA_6_OFFSET 14
+#define JA_7_OFFSET 15
+
+// The below gives a mapping between global interrupt
+// sources and their number. Note that on the coreplex
+// deliverable, the io_global_interrupts go directly into
+// the PLIC. The evaluation image on the FPGA mimics a
+// system with peripheral devices which are driving the
+// global interrupt lines.
+// So, on this image, in order to get an interrupt from
+// e.g. pressing BUTTON_0:
+// 1) Steps which are external to the delivery coreplex:
+//   a) The corresponding GPIO pin must be configured as in input
+//   b) The "interrupt on fall" bit must be set for the GPIO pin
+// 2) Steps which would also need to be performed for the delivery coreplex:
+//   a) The corresponding global interrupt, priority, and threshold must be configured in the PLIC.
+//   b) The external interrupt bit must be enabled in MSTATUS
+//   c) Interrupts must be enabled globally in the core.
+
+// Any of the above GPIO pins can be used as global interrupt
+// sources by adding their offset to the INT_GPIO_BASE.
+// For example, the buttons are shown here:
+
+#define INT_DEVICE_BUTTON_0 (GPIO_INT_BASE + BUTTON_0_OFFSET)
+#define INT_DEVICE_BUTTON_1 (GPIO_INT_BASE + BUTTON_1_OFFSET)
+#define INT_DEVICE_BUTTON_2 (GPIO_INT_BASE + BUTTON_2_OFFSET)
+#define INT_DEVICE_BUTTON_3 (GPIO_INT_BASE + BUTTON_3_OFFSET)
+
+// In addition, the Switches are mapped directly to
+// the PLIC (without going through the GPIO Peripheral).
+
+#define INT_EXT_DEVICE_SW_0 (EXTERNAL_INT_BASE + 0)
+#define INT_EXT_DEVICE_SW_1 (EXTERNAL_INT_BASE + 1)
+#define INT_EXT_DEVICE_SW_2 (EXTERNAL_INT_BASE + 2)
+#define INT_EXT_DEVICE_SW_3 (EXTERNAL_INT_BASE + 3)
+
+// This gives the mapping from inputs to LOCAL interrupts.
+
+#define LOCAL_INT_SW_0   0 
+#define LOCAL_INT_SW_1   1
+#define LOCAL_INT_SW_2   2 
+#define LOCAL_INT_SW_3   3
+#define LOCAL_INT_BTN_0  4
+#define LOCAL_INT_BTN_1  5
+#define LOCAL_INT_BTN_2  6
+#define LOCAL_INT_BTN_3  7
+#define LOCAL_INT_JA_0   8
+#define LOCAL_INT_JA_1   9
+#define LOCAL_INT_JA_2   10
+#define LOCAL_INT_JA_3   11
+#define LOCAL_INT_JA_4   12
+#define LOCAL_INT_JA_5   13
+#define LOCAL_INT_JA_6   14
+#define LOCAL_INT_JA_7   15
+
+#define RTC_FREQ 32768
+
+void write_hex(int fd, unsigned long int hex);
+
+#endif /* _SIFIVE_COREPLEXIP_ARTY_H */

hello-world/bsp/env/coreplexip-e31-arty/dhrystone.lds

@@ -0,0 +1,157 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
+}
+
+PHDRS
+{
+  flash PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >flash AT>flash :flash
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >flash AT>flash :flash
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >flash AT>flash :flash
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >flash AT>flash :flash
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >flash AT>flash :flash
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >flash AT>flash :flash
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >flash AT>flash :flash
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >flash AT>flash :flash
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >flash AT>flash :flash
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>flash :ram_init
+
+  .data          :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>flash :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
+  {
+    PROVIDE( _heap_end = . );
+    . = __stack_size;
+    PROVIDE( _sp = . );
+  } >ram AT>ram :ram
+}

hello-world/bsp/env/coreplexip-e31-arty/flash.lds

@@ -0,0 +1,161 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
+}
+
+PHDRS
+{
+  flash PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >flash AT>flash :flash
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >flash AT>flash :flash
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >flash AT>flash :flash
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  .rodata         :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+  } >flash AT>flash :flash
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >flash AT>flash :flash
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >flash AT>flash :flash
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >flash AT>flash :flash
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >flash AT>flash :flash
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >flash AT>flash :flash
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >flash AT>flash :flash
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>flash :ram_init
+
+  .data          :
+  {
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>flash :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
+  {
+    PROVIDE( _heap_end = . );
+    . = __stack_size;
+    PROVIDE( _sp = . );
+  } >ram AT>ram :ram
+}

hello-world/bsp/env/coreplexip-e31-arty/init.c

@@ -0,0 +1,122 @@
+//See LICENSE for license details.
+#include <stdint.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#include "platform.h"
+#include "encoding.h"
+
+#define CPU_FREQ 65000000
+#define XSTR(x) #x
+#define STR(x) XSTR(x)
+
+#ifndef VECT_IRQ
+  #define TRAP_ENTRY trap_entry
+#else
+  #define TRAP_ENTRY vtrap_entry
+#endif
+
+extern int main(int argc, char** argv);
+extern void TRAP_ENTRY();
+
+unsigned long get_cpu_freq()
+{
+  return CPU_FREQ;
+}
+
+unsigned long get_timer_freq()
+{
+  return get_cpu_freq();
+}
+
+uint64_t get_timer_value()
+{
+#if __riscv_xlen == 32
+  while (1) {
+    uint32_t hi = read_csr(mcycleh);
+    uint32_t lo = read_csr(mcycle);
+    if (hi == read_csr(mcycleh))
+      return ((uint64_t)hi << 32) | lo;
+  }
+#else
+  return read_csr(mcycle);
+#endif
+}
+
+static void uart_init(size_t baud_rate)
+{
+  UART0_REG(UART_REG_DIV) = (get_cpu_freq() / 2) / baud_rate - 1;
+  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
+}
+
+
+#ifdef USE_PLIC
+extern void handle_m_ext_interrupt();
+#endif
+
+#ifdef USE_M_TIME
+extern void handle_m_time_interrupt();
+#endif
+
+#ifdef USE_LOCAL_ISR
+typedef void (*my_interrupt_function_ptr_t) (void);
+extern my_interrupt_function_ptr_t localISR[];
+#endif
+
+#ifndef VECT_IRQ
+uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc) __attribute__((noinline));
+uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
+{
+  if (0){
+#ifdef USE_PLIC
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
+    handle_m_ext_interrupt();
+#endif
+#ifdef USE_M_TIME
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
+    handle_m_time_interrupt();
+#endif
+#ifdef USE_LOCAL_ISR
+  } else if (mcause & MCAUSE_INT) {
+    localISR[mcause & MCAUSE_CAUSE] ();
+#endif
+  }
+  else {
+    write(1, "Unhandled Trap:\n", 16);
+    _exit(1 + mcause);
+  }
+  return epc;
+}
+#endif 
+
+#ifdef USE_CLIC
+void trap_entry(void) __attribute__((interrupt("SiFive-CLIC-preemptible"), aligned(64)));
+void trap_entry(void)
+{
+  unsigned long mcause = read_csr(mcause);
+  unsigned long mepc = read_csr(mepc);
+  handle_trap(mcause, mepc);
+}
+#endif
+
+void _init()
+{
+  #ifndef NO_INIT
+  uart_init(115200);
+
+  puts("core freq at " STR(CPU_FREQ) " Hz\n");
+
+#ifdef USE_CLIC
+  write_csr(mtvec, ((unsigned long)&trap_entry | MTVEC_CLIC));
+#else
+  write_csr(mtvec, ((unsigned long)&TRAP_ENTRY | MTVEC_VECTORED));
+#endif
+
+  #endif
+}
+
+void _fini()
+{
+}

hello-world/bsp/env/coreplexip-e31-arty/openocd.cfg

@@ -0,0 +1,31 @@
+# JTAG adapter setup
+adapter_khz     10000
+
+interface ftdi
+ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
+ftdi_vid_pid 0x15ba 0x002a
+
+ftdi_layout_init 0x0808 0x0a1b
+ftdi_layout_signal nSRST -oe 0x0200
+#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
+ftdi_layout_signal LED -data 0x0800
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
+
+set _TARGETNAME $_CHIPNAME.cpu
+
+target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
+$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+# Un-comment these two flash lines if you have a SPI flash and want to write
+# it.
+flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
+init
+if {[ info exists pulse_srst]} {
+  ftdi_set_signal nSRST 0
+  ftdi_set_signal nSRST z
+}
+halt
+#flash protect 0 64 last off
+echo "Ready for Remote Connections"

hello-world/bsp/env/coreplexip-e31-arty/platform.h

@@ -0,0 +1,100 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_PLATFORM_H
+#define _SIFIVE_PLATFORM_H
+
+// Some things missing from the official encoding.h
+
+#if __riscv_xlen == 32
+#define MCAUSE_INT         0x80000000UL
+#define MCAUSE_CAUSE       0x000003FFUL
+#else
+#define MCAUSE_INT         0x8000000000000000UL
+#define MCAUSE_CAUSE       0x00000000000003FFUL
+#endif
+
+#ifdef VECT_IRQ
+    #define MTVEC_VECTORED     0x01
+#else 
+    #define MTVEC_VECTORED     0x00
+#endif
+#define MTVEC_CLIC             0x02
+#define IRQ_M_LOCAL        16
+#define MIP_MLIP(x)        (1 << (IRQ_M_LOCAL + x))
+
+#include "sifive/const.h"
+#include "sifive/devices/clint.h"
+#include "sifive/devices/gpio.h"
+#include "sifive/devices/plic.h"
+#include "sifive/devices/pwm.h"
+#include "sifive/devices/spi.h"
+#include "sifive/devices/uart.h"
+
+/****************************************************************************
+ * Platform definitions
+ *****************************************************************************/
+
+// Memory map
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
+#define GPIO_CTRL_ADDR _AC(0x20002000,UL)
+#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
+#define PWM0_CTRL_ADDR _AC(0x20005000,UL)
+#define RAM_MEM_ADDR _AC(0x80000000,UL)
+#define RAM_MEM_SIZE _AC(0x10000,UL)
+#define SPI0_CTRL_ADDR _AC(0x20004000,UL)
+#define SPI0_MEM_ADDR _AC(0x40000000,UL)
+#define SPI0_MEM_SIZE _AC(0x20000000,UL)
+#define TESTBENCH_MEM_ADDR _AC(0x20000000,UL)
+#define TESTBENCH_MEM_SIZE _AC(0x10000000,UL)
+#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
+#define UART0_CTRL_ADDR _AC(0x20000000,UL)
+
+// IOF masks
+
+// Interrupt numbers
+#define RESERVED_INT_BASE 0
+#define UART0_INT_BASE 1
+#define EXTERNAL_INT_BASE 2
+#define SPI0_INT_BASE 6
+#define GPIO_INT_BASE 7
+#define PWM0_INT_BASE 23
+
+// Helper functions
+#define _REG64(p, i) (*(volatile uint64_t *)((p) + (i)))
+#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
+#define _REG16(p, i) (*(volatile uint16_t *)((p) + (i)))
+// Bulk set bits in `reg` to either 0 or 1.
+// E.g. SET_BITS(MY_REG, 0x00000007, 0) would generate MY_REG &= ~0x7
+// E.g. SET_BITS(MY_REG, 0x00000007, 1) would generate MY_REG |= 0x7
+#define SET_BITS(reg, mask, value) if ((value) == 0) { (reg) &= ~(mask); } else { (reg) |= (mask); }
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
+#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
+#define TRAPVEC_TABLE_REG(offset) _REG32(TRAPVEC_TABLE_CTRL_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
+#define CLINT_REG64(offset) _REG64(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG64(offset) _REG64(GPIO_CTRL_ADDR, offset)
+#define PLIC_REG64(offset) _REG64(PLIC_CTRL_ADDR, offset)
+#define PWM0_REG64(offset) _REG64(PWM0_CTRL_ADDR, offset)
+#define SPI0_REG64(offset) _REG64(SPI0_CTRL_ADDR, offset)
+#define TRAPVEC_TABLE_REG64(offset) _REG64(TRAPVEC_TABLE_CTRL_ADDR, offset)
+#define UART0_REG64(offset) _REG64(UART0_CTRL_ADDR, offset)
+
+// Misc
+
+#define NUM_GPIO 16
+
+#define PLIC_NUM_INTERRUPTS 28
+#define PLIC_NUM_PRIORITIES 7
+
+#define HAS_BOARD_BUTTONS
+
+#include "coreplexip-arty.h"
+
+unsigned long get_cpu_freq(void);
+unsigned long get_timer_freq(void);
+uint64_t get_timer_value(void);
+
+#endif /* _SIFIVE_PLATFORM_H */

hello-world/bsp/env/coreplexip-e31-arty/scratchpad.lds

@@ -0,0 +1,161 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
+}
+
+PHDRS
+{
+  ram PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >ram AT>ram :ram
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >ram AT>ram :ram
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >ram AT>ram :ram
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  .rodata         :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+  } >ram AT>ram :ram
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >ram AT>ram :ram
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >ram AT>ram :ram
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >ram AT>ram :ram
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >ram AT>ram :ram
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >ram AT>ram :ram
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >ram AT>ram :ram
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>ram :ram_init
+
+  .data          :
+  {
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>ram :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack :
+  {
+    . = ALIGN(8);
+    . += __stack_size;
+    PROVIDE( _sp = . );
+    PROVIDE( _heap_end = . );
+  } >ram AT>ram :ram
+}

hello-world/bsp/env/coreplexip-e31-arty/settings.mk

@@ -0,0 +1,3 @@
+# Describes the CPU on this board to the rest of the SDK.
+RISCV_ARCH := rv32imac
+RISCV_ABI  := ilp32

hello-world/bsp/env/coreplexip-e51-arty/dhrystone.lds

@@ -0,0 +1,157 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
+}
+
+PHDRS
+{
+  flash PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >flash AT>flash :flash
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >flash AT>flash :flash
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >flash AT>flash :flash
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >flash AT>flash :flash
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >flash AT>flash :flash
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >flash AT>flash :flash
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >flash AT>flash :flash
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >flash AT>flash :flash
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >flash AT>flash :flash
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>flash :ram_init
+
+  .data          :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>flash :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
+  {
+    PROVIDE( _heap_end = . );
+    . = __stack_size;
+    PROVIDE( _sp = . );
+  } >ram AT>ram :ram
+}

hello-world/bsp/env/coreplexip-e51-arty/flash.lds

@@ -0,0 +1,161 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  flash (rxai!w) : ORIGIN = 0x40400000, LENGTH = 512M
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
+}
+
+PHDRS
+{
+  flash PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 2K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >flash AT>flash :flash
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >flash AT>flash :flash
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >flash AT>flash :flash
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  .rodata         :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+  } >flash AT>flash :flash
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >flash AT>flash :flash
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >flash AT>flash :flash
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >flash AT>flash :flash
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >flash AT>flash :flash
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >flash AT>flash :flash
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >flash AT>flash :flash
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>flash :ram_init
+
+  .data          :
+  {
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>flash :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack ORIGIN(ram) + LENGTH(ram) - __stack_size :
+  {
+    PROVIDE( _heap_end = . );
+    . = __stack_size;
+    PROVIDE( _sp = . );
+  } >ram AT>ram :ram
+}

hello-world/bsp/env/coreplexip-e51-arty/init.c

@@ -0,0 +1,122 @@
+//See LICENSE for license details.
+#include <stdint.h>
+#include <stdio.h>
+#include <unistd.h>
+
+#include "platform.h"
+#include "encoding.h"
+
+#define CPU_FREQ 65000000
+#define XSTR(x) #x
+#define STR(x) XSTR(x)
+
+#ifndef VECT_IRQ
+  #define TRAP_ENTRY trap_entry
+#else
+  #define TRAP_ENTRY vtrap_entry
+#endif
+
+extern int main(int argc, char** argv);
+extern void TRAP_ENTRY();
+
+unsigned long get_cpu_freq()
+{
+  return CPU_FREQ;
+}
+
+unsigned long get_timer_freq()
+{
+  return get_cpu_freq();
+}
+
+uint64_t get_timer_value()
+{
+#if __riscv_xlen == 32
+  while (1) {
+    uint32_t hi = read_csr(mcycleh);
+    uint32_t lo = read_csr(mcycle);
+    if (hi == read_csr(mcycleh))
+      return ((uint64_t)hi << 32) | lo;
+  }
+#else
+  return read_csr(mcycle);
+#endif
+}
+
+static void uart_init(size_t baud_rate)
+{
+  UART0_REG(UART_REG_DIV) = (get_cpu_freq() / 2) / baud_rate - 1;
+  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
+}
+
+
+#ifdef USE_PLIC
+extern void handle_m_ext_interrupt();
+#endif
+
+#ifdef USE_M_TIME
+extern void handle_m_time_interrupt();
+#endif
+
+#ifdef USE_LOCAL_ISR
+typedef void (*my_interrupt_function_ptr_t) (void);
+extern my_interrupt_function_ptr_t localISR[];
+#endif
+
+#ifndef VECT_IRQ
+uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc) __attribute__((noinline));
+uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
+{
+  if (0){
+#ifdef USE_PLIC
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
+    handle_m_ext_interrupt();
+#endif
+#ifdef USE_M_TIME
+    // External Machine-Level interrupt from PLIC
+  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
+    handle_m_time_interrupt();
+#endif
+#ifdef USE_LOCAL_ISR
+  } else if (mcause & MCAUSE_INT) {
+    localISR[mcause & MCAUSE_CAUSE] ();
+#endif
+  }
+  else {
+    write(1, "Unhandled Trap:\n", 16);
+    _exit(1 + mcause);
+  }
+  return epc;
+}
+#endif 
+
+#ifdef USE_CLIC
+void trap_entry(void) __attribute__((interrupt("SiFive-CLIC-preemptible"), aligned(64)));
+void trap_entry(void)
+{
+  unsigned long mcause = read_csr(mcause);
+  unsigned long mepc = read_csr(mepc);
+  handle_trap(mcause, mepc);
+}
+#endif
+
+void _init()
+{
+  #ifndef NO_INIT
+  uart_init(115200);
+
+  puts("core freq at " STR(CPU_FREQ) " Hz\n");
+
+#ifdef USE_CLIC
+  write_csr(mtvec, ((unsigned long)&trap_entry | MTVEC_CLIC));
+#else
+  write_csr(mtvec, ((unsigned long)&TRAP_ENTRY | MTVEC_VECTORED));
+#endif
+
+  #endif
+}
+
+void _fini()
+{
+}

hello-world/bsp/env/coreplexip-e51-arty/openocd.cfg

@@ -0,0 +1,31 @@
+# JTAG adapter setup
+adapter_khz     10000
+
+interface ftdi
+ftdi_device_desc "Olimex OpenOCD JTAG ARM-USB-TINY-H"
+ftdi_vid_pid 0x15ba 0x002a
+
+ftdi_layout_init 0x0808 0x0a1b
+ftdi_layout_signal nSRST -oe 0x0200
+#ftdi_layout_signal nTRST -data 0x0100 -oe 0x0100
+ftdi_layout_signal LED -data 0x0800
+
+set _CHIPNAME riscv
+jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000001
+
+set _TARGETNAME $_CHIPNAME.cpu
+
+target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
+$_TARGETNAME.0 configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
+
+# Un-comment these two flash lines if you have a SPI flash and want to write
+# it.
+flash bank spi0 fespi 0x40000000 0 0 0 $_TARGETNAME.0 0x20004000
+init
+if {[ info exists pulse_srst]} {
+  ftdi_set_signal nSRST 0
+  ftdi_set_signal nSRST z
+}
+halt
+#flash protect 0 64 last off
+echo "Ready for Remote Connections"

hello-world/bsp/env/coreplexip-e51-arty/platform.h

@@ -0,0 +1,100 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_PLATFORM_H
+#define _SIFIVE_PLATFORM_H
+
+// Some things missing from the official encoding.h
+
+#if __riscv_xlen == 32
+#define MCAUSE_INT         0x80000000UL
+#define MCAUSE_CAUSE       0x000003FFUL
+#else
+#define MCAUSE_INT         0x8000000000000000UL
+#define MCAUSE_CAUSE       0x00000000000003FFUL
+#endif
+
+#ifdef VECT_IRQ
+    #define MTVEC_VECTORED     0x01
+#else 
+    #define MTVEC_VECTORED     0x00
+#endif
+#define MTVEC_CLIC             0x02
+#define IRQ_M_LOCAL        16
+#define MIP_MLIP(x)        (1 << (IRQ_M_LOCAL + x))
+
+#include "sifive/const.h"
+#include "sifive/devices/clint.h"
+#include "sifive/devices/gpio.h"
+#include "sifive/devices/plic.h"
+#include "sifive/devices/pwm.h"
+#include "sifive/devices/spi.h"
+#include "sifive/devices/uart.h"
+
+/****************************************************************************
+ * Platform definitions
+ *****************************************************************************/
+
+// Memory map
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
+#define GPIO_CTRL_ADDR _AC(0x20002000,UL)
+#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
+#define PWM0_CTRL_ADDR _AC(0x20005000,UL)
+#define RAM_MEM_ADDR _AC(0x80000000,UL)
+#define RAM_MEM_SIZE _AC(0x10000,UL)
+#define SPI0_CTRL_ADDR _AC(0x20004000,UL)
+#define SPI0_MEM_ADDR _AC(0x40000000,UL)
+#define SPI0_MEM_SIZE _AC(0x20000000,UL)
+#define TESTBENCH_MEM_ADDR _AC(0x20000000,UL)
+#define TESTBENCH_MEM_SIZE _AC(0x10000000,UL)
+#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
+#define UART0_CTRL_ADDR _AC(0x20000000,UL)
+
+// IOF masks
+
+// Interrupt numbers
+#define RESERVED_INT_BASE 0
+#define UART0_INT_BASE 1
+#define EXTERNAL_INT_BASE 2
+#define SPI0_INT_BASE 6
+#define GPIO_INT_BASE 7
+#define PWM0_INT_BASE 23
+
+// Helper functions
+#define _REG64(p, i) (*(volatile uint64_t *)((p) + (i)))
+#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i)))
+#define _REG16(p, i) (*(volatile uint16_t *)((p) + (i)))
+// Bulk set bits in `reg` to either 0 or 1.
+// E.g. SET_BITS(MY_REG, 0x00000007, 0) would generate MY_REG &= ~0x7
+// E.g. SET_BITS(MY_REG, 0x00000007, 1) would generate MY_REG |= 0x7
+#define SET_BITS(reg, mask, value) if ((value) == 0) { (reg) &= ~(mask); } else { (reg) |= (mask); }
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
+#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
+#define TRAPVEC_TABLE_REG(offset) _REG32(TRAPVEC_TABLE_CTRL_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
+#define CLINT_REG64(offset) _REG64(CLINT_CTRL_ADDR, offset)
+#define GPIO_REG64(offset) _REG64(GPIO_CTRL_ADDR, offset)
+#define PLIC_REG64(offset) _REG64(PLIC_CTRL_ADDR, offset)
+#define PWM0_REG64(offset) _REG64(PWM0_CTRL_ADDR, offset)
+#define SPI0_REG64(offset) _REG64(SPI0_CTRL_ADDR, offset)
+#define TRAPVEC_TABLE_REG64(offset) _REG64(TRAPVEC_TABLE_CTRL_ADDR, offset)
+#define UART0_REG64(offset) _REG64(UART0_CTRL_ADDR, offset)
+
+// Misc
+
+#define NUM_GPIO 16
+
+#define PLIC_NUM_INTERRUPTS 28
+#define PLIC_NUM_PRIORITIES 7
+
+#define HAS_BOARD_BUTTONS
+
+#include "coreplexip-arty.h"
+
+unsigned long get_cpu_freq(void);
+unsigned long get_timer_freq(void);
+uint64_t get_timer_value(void);
+
+#endif /* _SIFIVE_PLATFORM_H */

hello-world/bsp/env/coreplexip-e51-arty/scratchpad.lds

@@ -0,0 +1,161 @@
+OUTPUT_ARCH( "riscv" )
+
+ENTRY( _start )
+
+MEMORY
+{
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
+}
+
+PHDRS
+{
+  ram PT_LOAD;
+  ram_init PT_LOAD;
+  ram PT_NULL;
+}
+
+SECTIONS
+{
+  __stack_size = DEFINED(__stack_size) ? __stack_size : 1K;
+
+  .init           :
+  {
+    KEEP (*(SORT_NONE(.init)))
+  } >ram AT>ram :ram
+
+  .text           :
+  {
+    *(.text.unlikely .text.unlikely.*)
+    *(.text.startup .text.startup.*)
+    *(.text .text.*)
+    *(.gnu.linkonce.t.*)
+  } >ram AT>ram :ram
+
+  .fini           :
+  {
+    KEEP (*(SORT_NONE(.fini)))
+  } >ram AT>ram :ram
+
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  .rodata         :
+  {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
+  } >ram AT>ram :ram
+
+  . = ALIGN(4);
+
+  .preinit_array  :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >ram AT>ram :ram
+
+  .init_array     :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.init_array.*) SORT_BY_INIT_PRIORITY(.ctors.*)))
+    KEEP (*(.init_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .ctors))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >ram AT>ram :ram
+
+  .fini_array     :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT_BY_INIT_PRIORITY(.fini_array.*) SORT_BY_INIT_PRIORITY(.dtors.*)))
+    KEEP (*(.fini_array EXCLUDE_FILE (*crtbegin.o *crtbegin?.o *crtend.o *crtend?.o ) .dtors))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >ram AT>ram :ram
+
+  .ctors          :
+  {
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+  } >ram AT>ram :ram
+
+  .dtors          :
+  {
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+  } >ram AT>ram :ram
+
+  .lalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data_lma = . );
+  } >ram AT>ram :ram
+
+  .dalign         :
+  {
+    . = ALIGN(4);
+    PROVIDE( _data = . );
+  } >ram AT>ram :ram_init
+
+  .data          :
+  {
+    *(.data .data.*)
+    *(.gnu.linkonce.d.*)
+    . = ALIGN(8);
+    PROVIDE( __global_pointer$ = . + 0x800 );
+    *(.sdata .sdata.*)
+    *(.gnu.linkonce.s.*)
+    . = ALIGN(8);
+    *(.srodata.cst16)
+    *(.srodata.cst8)
+    *(.srodata.cst4)
+    *(.srodata.cst2)
+    *(.srodata .srodata.*)
+  } >ram AT>ram :ram_init
+
+  . = ALIGN(4);
+  PROVIDE( _edata = . );
+  PROVIDE( edata = . );
+
+  PROVIDE( _fbss = . );
+  PROVIDE( __bss_start = . );
+  .bss            :
+  {
+    *(.sbss*)
+    *(.gnu.linkonce.sb.*)
+    *(.bss .bss.*)
+    *(.gnu.linkonce.b.*)
+    *(COMMON)
+    . = ALIGN(4);
+  } >ram AT>ram :ram
+
+  . = ALIGN(8);
+  PROVIDE( _end = . );
+  PROVIDE( end = . );
+
+  .stack :
+  {
+    . = ALIGN(8);
+    . += __stack_size;
+    PROVIDE( _sp = . );
+    PROVIDE( _heap_end = . );
+  } >ram AT>ram :ram
+}

hello-world/bsp/env/coreplexip-e51-arty/settings.mk

@@ -0,0 +1,3 @@
+# Describes the CPU on this board to the rest of the SDK.
+RISCV_ARCH := rv64imac
+RISCV_ABI  := lp64

hello-world/bsp/env/entry.S

@@ -8,6 +8,7 @@
 
   .section      .text.entry	
   .align 2
+  .weak trap_entry
   .global trap_entry
 trap_entry:
   addi sp, sp, -32*REGBYTES

hello-world/bsp/env/freedom-e300-arty/flash.lds

@@ -120,11 +120,11 @@ SECTIONS
   {
     *(.data .data.*)
     *(.gnu.linkonce.d.*)
-  } >ram AT>flash :ram_init
+    . = ALIGN(8);
-
+    PROVIDE( __global_pointer$ = . + 0x800 );
-  .srodata        :
+    *(.sdata .sdata.*)
-  {
+    *(.gnu.linkonce.s.*)
-    PROVIDE( _gp = . + 0x800 );
+    . = ALIGN(8);
     *(.srodata.cst16)
     *(.srodata.cst8)
     *(.srodata.cst4)
@@ -132,12 +132,6 @@ SECTIONS
     *(.srodata .srodata.*)
   } >ram AT>flash :ram_init
 
-  .sdata          :
-  {
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-  } >ram AT>flash :ram_init
-
   . = ALIGN(4);
   PROVIDE( _edata = . );
   PROVIDE( edata = . );

hello-world/bsp/env/freedom-e300-arty/platform.h

@@ -20,21 +20,21 @@
  * Platform definitions
  *****************************************************************************/
 
-#define TRAPVEC_TABLE_BASE_ADDR _AC(0x00001010,UL)
+#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
-#define CLINT_BASE_ADDR _AC(0x02000000,UL)
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
-#define PLIC_BASE_ADDR _AC(0x0C000000,UL)
+#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
-#define AON_BASE_ADDR _AC(0x10000000,UL)
+#define AON_CTRL_ADDR _AC(0x10000000,UL)
-#define GPIO_BASE_ADDR _AC(0x10012000,UL)
+#define GPIO_CTRL_ADDR _AC(0x10012000,UL)
-#define UART0_BASE_ADDR _AC(0x10013000,UL)
+#define UART0_CTRL_ADDR _AC(0x10013000,UL)
-#define SPI0_BASE_ADDR _AC(0x10014000,UL)
+#define SPI0_CTRL_ADDR _AC(0x10014000,UL)
-#define PWM0_BASE_ADDR _AC(0x10015000,UL)
+#define PWM0_CTRL_ADDR _AC(0x10015000,UL)
-#define UART1_BASE_ADDR _AC(0x10023000,UL)
+#define UART1_CTRL_ADDR _AC(0x10023000,UL)
-#define SPI1_BASE_ADDR _AC(0x10024000,UL)
+#define SPI1_CTRL_ADDR _AC(0x10024000,UL)
-#define PWM1_BASE_ADDR _AC(0x10025000,UL)
+#define PWM1_CTRL_ADDR _AC(0x10025000,UL)
-#define SPI2_BASE_ADDR _AC(0x10034000,UL)
+#define SPI2_CTRL_ADDR _AC(0x10034000,UL)
-#define PWM2_BASE_ADDR _AC(0x10035000,UL)
+#define PWM2_CTRL_ADDR _AC(0x10035000,UL)
 #define SPI0_MMAP_ADDR _AC(0x20000000,UL)
-#define MEM_BASE_ADDR _AC(0x80000000,UL)
+#define MEM_CTRL_ADDR _AC(0x80000000,UL)
 
 // IOF Mappings
 #define IOF0_SPI1_MASK          _AC(0x000007FC,UL)
@@ -91,20 +91,19 @@
 // Helper functions
 #define _REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
 #define _REG32P(p, i) ((volatile uint32_t *) ((p) + (i)))
-#define AON_REG(offset) _REG32(AON_BASE_ADDR, offset)
+#define AON_REG(offset) _REG32(AON_CTRL_ADDR, offset)
-#define CLINT_REG(offset) _REG32(CLINT_BASE_ADDR, offset)
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
-#define GPIO_REG(offset) _REG32(GPIO_BASE_ADDR, offset)
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
-#define OTP_REG(offset)  _REG32(OTP_BASE_ADDR, offset)
+#define OTP_REG(offset)  _REG32(OTP_CTRL_ADDR, offset)
-#define PLIC_REG(offset) _REG32(PLIC_BASE_ADDR, offset)
+#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
-#define PRCI_REG(offset) _REG32(PRCI_BASE_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
-#define PWM0_REG(offset) _REG32(PWM0_BASE_ADDR, offset)
+#define PWM1_REG(offset) _REG32(PWM1_CTRL_ADDR, offset)
-#define PWM1_REG(offset) _REG32(PWM1_BASE_ADDR, offset)
+#define PWM2_REG(offset) _REG32(PWM2_CTRL_ADDR, offset)
-#define PWM2_REG(offset) _REG32(PWM2_BASE_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
-#define SPI0_REG(offset) _REG32(SPI0_BASE_ADDR, offset)
+#define SPI1_REG(offset) _REG32(SPI1_CTRL_ADDR, offset)
-#define SPI1_REG(offset) _REG32(SPI1_BASE_ADDR, offset)
+#define SPI2_REG(offset) _REG32(SPI2_CTRL_ADDR, offset)
-#define SPI2_REG(offset) _REG32(SPI2_BASE_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
-#define UART0_REG(offset) _REG32(UART0_BASE_ADDR, offset)
+#define UART1_REG(offset) _REG32(UART1_CTRL_ADDR, offset)
-#define UART1_REG(offset) _REG32(UART1_BASE_ADDR, offset)
 
 // Misc
 

hello-world/bsp/env/freedom-e300-arty/settings.mk

@@ -0,0 +1,3 @@
+# Describes the CPU on this board to the rest of the SDK.
+RISCV_ARCH := rv32imac
+RISCV_ABI  := ilp32

hello-world/bsp/env/freedom-e300-hifive1/dhrystone.lds

@@ -4,9 +4,8 @@ ENTRY( _start )
 
 MEMORY
 {
-  /*flash (rxai!w) : ORIGIN = 0x00000000, LENGTH = 1M*/
   flash (rxai!w) : ORIGIN = 0x20400000, LENGTH = 512M
-  ram (wxa!ri) :   ORIGIN = 0x80000000, LENGTH = 16K
+  ram (wxa!ri) : ORIGIN = 0x80000000, LENGTH = 16K
 }
 
 PHDRS
@@ -42,13 +41,6 @@ SECTIONS
   PROVIDE (_etext = .);
   PROVIDE (etext = .);
 
-  .rodata         :
-  {
-    *(.rdata)
-    *(.rodata .rodata.*)
-    *(.gnu.linkonce.r.*)
-  } >flash AT>flash :flash
-
   . = ALIGN(4);
 
   .preinit_array  :
@@ -119,13 +111,16 @@ SECTIONS
 
   .data          :
   {
+    *(.rdata)
+    *(.rodata .rodata.*)
+    *(.gnu.linkonce.r.*)
     *(.data .data.*)
     *(.gnu.linkonce.d.*)
-  } >ram AT>flash :ram_init
+    . = ALIGN(8);
-
+    PROVIDE( __global_pointer$ = . + 0x800 );
-  .srodata        :
+    *(.sdata .sdata.*)
-  {
+    *(.gnu.linkonce.s.*)
-    PROVIDE( _gp = . + 0x800 );
+    . = ALIGN(8);
     *(.srodata.cst16)
     *(.srodata.cst8)
     *(.srodata.cst4)
@@ -133,12 +128,6 @@ SECTIONS
     *(.srodata .srodata.*)
   } >ram AT>flash :ram_init
 
-  .sdata          :
-  {
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-  } >ram AT>flash :ram_init
-
   . = ALIGN(4);
   PROVIDE( _edata = . );
   PROVIDE( edata = . );

hello-world/bsp/env/freedom-e300-hifive1/flash.lds

@@ -120,11 +120,11 @@ SECTIONS
   {
     *(.data .data.*)
     *(.gnu.linkonce.d.*)
-  } >ram AT>flash :ram_init
+    . = ALIGN(8);
-
+    PROVIDE( __global_pointer$ = . + 0x800 );
-  .srodata        :
+    *(.sdata .sdata.*)
-  {
+    *(.gnu.linkonce.s.*)
-    PROVIDE( _gp = . + 0x800 );
+    . = ALIGN(8);
     *(.srodata.cst16)
     *(.srodata.cst8)
     *(.srodata.cst4)
@@ -132,12 +132,6 @@ SECTIONS
     *(.srodata .srodata.*)
   } >ram AT>flash :ram_init
 
-  .sdata          :
-  {
-    *(.sdata .sdata.*)
-    *(.gnu.linkonce.s.*)
-  } >ram AT>flash :ram_init
-
   . = ALIGN(4);
   PROVIDE( _edata = . );
   PROVIDE( edata = . );

hello-world/bsp/env/freedom-e300-hifive1/init.c

@@ -10,14 +10,14 @@ extern void trap_entry();
 
 static unsigned long mtime_lo(void)
 {
-  return *(volatile unsigned long *)(CLINT_BASE_ADDR + CLINT_MTIME);
+  return *(volatile unsigned long *)(CLINT_CTRL_ADDR + CLINT_MTIME);
 }
 
 #ifdef __riscv32
 
 static uint32_t mtime_hi(void)
 {
-  return *(volatile uint32_t *)(CLINT_BASE_ADDR + CLINT_MTIME + 4);
+  return *(volatile uint32_t *)(CLINT_CTRL_ADDR + CLINT_MTIME + 4);
 }
 
 uint64_t get_timer_value()

hello-world/bsp/env/freedom-e300-hifive1/platform.h

@@ -23,25 +23,25 @@
  *****************************************************************************/
 
 // Memory map
-#define MASKROM_BASE_ADDR _AC(0x00001000,UL)
+#define MASKROM_MEM_ADDR _AC(0x00001000,UL)
-#define TRAPVEC_TABLE_BASE_ADDR _AC(0x00001010,UL)
+#define TRAPVEC_TABLE_CTRL_ADDR _AC(0x00001010,UL)
-#define OTP_MMAP_ADDR _AC(0x00020000,UL)
+#define OTP_MEM_ADDR _AC(0x00020000,UL)
-#define CLINT_BASE_ADDR _AC(0x02000000,UL)
+#define CLINT_CTRL_ADDR _AC(0x02000000,UL)
-#define PLIC_BASE_ADDR _AC(0x0C000000,UL)
+#define PLIC_CTRL_ADDR _AC(0x0C000000,UL)
-#define AON_BASE_ADDR _AC(0x10000000,UL)
+#define AON_CTRL_ADDR _AC(0x10000000,UL)
-#define PRCI_BASE_ADDR _AC(0x10008000,UL)
+#define PRCI_CTRL_ADDR _AC(0x10008000,UL)
-#define OTP_BASE_ADDR _AC(0x10010000,UL)
+#define OTP_CTRL_ADDR _AC(0x10010000,UL)
-#define GPIO_BASE_ADDR _AC(0x10012000,UL)
+#define GPIO_CTRL_ADDR _AC(0x10012000,UL)
-#define UART0_BASE_ADDR _AC(0x10013000,UL)
+#define UART0_CTRL_ADDR _AC(0x10013000,UL)
-#define SPI0_BASE_ADDR _AC(0x10014000,UL)
+#define SPI0_CTRL_ADDR _AC(0x10014000,UL)
-#define PWM0_BASE_ADDR _AC(0x10015000,UL)
+#define PWM0_CTRL_ADDR _AC(0x10015000,UL)
-#define UART1_BASE_ADDR _AC(0x10023000,UL)
+#define UART1_CTRL_ADDR _AC(0x10023000,UL)
-#define SPI1_BASE_ADDR _AC(0x10024000,UL)
+#define SPI1_CTRL_ADDR _AC(0x10024000,UL)
-#define PWM1_BASE_ADDR _AC(0x10025000,UL)
+#define PWM1_CTRL_ADDR _AC(0x10025000,UL)
-#define SPI2_BASE_ADDR _AC(0x10034000,UL)
+#define SPI2_CTRL_ADDR _AC(0x10034000,UL)
-#define PWM2_BASE_ADDR _AC(0x10035000,UL)
+#define PWM2_CTRL_ADDR _AC(0x10035000,UL)
-#define SPI0_MMAP_ADDR _AC(0x20000000,UL)
+#define SPI0_MEM_ADDR _AC(0x20000000,UL)
-#define MEM_BASE_ADDR _AC(0x80000000,UL)
+#define MEM_CTRL_ADDR _AC(0x80000000,UL)
 
 // IOF masks
 #define IOF0_SPI1_MASK          _AC(0x000007FC,UL)
@@ -100,20 +100,20 @@
 // Helper functions
 #define _REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
 #define _REG32P(p, i) ((volatile uint32_t *) ((p) + (i)))
-#define AON_REG(offset) _REG32(AON_BASE_ADDR, offset)
+#define AON_REG(offset) _REG32(AON_CTRL_ADDR, offset)
-#define CLINT_REG(offset) _REG32(CLINT_BASE_ADDR, offset)
+#define CLINT_REG(offset) _REG32(CLINT_CTRL_ADDR, offset)
-#define GPIO_REG(offset) _REG32(GPIO_BASE_ADDR, offset)
+#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset)
-#define OTP_REG(offset)  _REG32(OTP_BASE_ADDR, offset)
+#define OTP_REG(offset)  _REG32(OTP_CTRL_ADDR, offset)
-#define PLIC_REG(offset) _REG32(PLIC_BASE_ADDR, offset)
+#define PLIC_REG(offset) _REG32(PLIC_CTRL_ADDR, offset)
-#define PRCI_REG(offset) _REG32(PRCI_BASE_ADDR, offset)
+#define PRCI_REG(offset) _REG32(PRCI_CTRL_ADDR, offset)
-#define PWM0_REG(offset) _REG32(PWM0_BASE_ADDR, offset)
+#define PWM0_REG(offset) _REG32(PWM0_CTRL_ADDR, offset)
-#define PWM1_REG(offset) _REG32(PWM1_BASE_ADDR, offset)
+#define PWM1_REG(offset) _REG32(PWM1_CTRL_ADDR, offset)
-#define PWM2_REG(offset) _REG32(PWM2_BASE_ADDR, offset)
+#define PWM2_REG(offset) _REG32(PWM2_CTRL_ADDR, offset)
-#define SPI0_REG(offset) _REG32(SPI0_BASE_ADDR, offset)
+#define SPI0_REG(offset) _REG32(SPI0_CTRL_ADDR, offset)
-#define SPI1_REG(offset) _REG32(SPI1_BASE_ADDR, offset)
+#define SPI1_REG(offset) _REG32(SPI1_CTRL_ADDR, offset)
-#define SPI2_REG(offset) _REG32(SPI2_BASE_ADDR, offset)
+#define SPI2_REG(offset) _REG32(SPI2_CTRL_ADDR, offset)
-#define UART0_REG(offset) _REG32(UART0_BASE_ADDR, offset)
+#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset)
-#define UART1_REG(offset) _REG32(UART1_BASE_ADDR, offset)
+#define UART1_REG(offset) _REG32(UART1_CTRL_ADDR, offset)
 
 // Misc
 

hello-world/bsp/env/freedom-e300-hifive1/settings.mk

@@ -0,0 +1,3 @@
+# Describes the CPU on this board to the rest of the SDK.
+RISCV_ARCH := rv32imac
+RISCV_ABI  := ilp32

hello-world/bsp/env/hifive1.h

@@ -76,6 +76,6 @@
 
 #define RTC_FREQ 32768
 
-void write_hex(int fd, uint32_t hex);
+void write_hex(int fd, unsigned long int hex);
 
 #endif /* _SIFIVE_HIFIVE1_H */

hello-world/bsp/env/iss/init.c

@@ -1,238 +0,0 @@
-#include <stdint.h>
-#include <stdio.h>
-#include <unistd.h>
-
-#include "platform.h"
-#include "encoding.h"
-
-extern int main(int argc, char** argv);
-extern void trap_entry();
-
-static unsigned long mtime_lo(void)
-{
-  return *(volatile unsigned long *)(CLINT_BASE_ADDR + CLINT_MTIME);
-}
-
-#ifdef __riscv32
-
-static uint32_t mtime_hi(void)
-{
-  return *(volatile uint32_t *)(CLINT_BASE_ADDR + CLINT_MTIME + 4);
-}
-
-uint64_t get_timer_value()
-{
-  while (1) {
-    uint32_t hi = mtime_hi();
-    uint32_t lo = mtime_lo();
-    if (hi == mtime_hi())
-      return ((uint64_t)hi << 32) | lo;
-  }
-}
-
-#else /* __riscv32 */
-
-uint64_t get_timer_value()
-{
-  return mtime_lo();
-}
-
-#endif
-
-unsigned long get_timer_freq()
-{
-  return 32768;
-}
-
-static void use_hfrosc(int div, int trim)
-{
-  // Make sure the HFROSC is running at its default setting
-  PRCI_REG(PRCI_HFROSCCFG) = (ROSC_DIV(div) | ROSC_TRIM(trim) | ROSC_EN(1));
-  while ((PRCI_REG(PRCI_HFROSCCFG) & ROSC_RDY(1)) == 0) ;
-  PRCI_REG(PRCI_PLLCFG) &= ~PLL_SEL(1);
-}
-
-static void use_pll(int refsel, int bypass, int r, int f, int q)
-{
-  // Ensure that we aren't running off the PLL before we mess with it.
-  if (PRCI_REG(PRCI_PLLCFG) & PLL_SEL(1)) {
-    // Make sure the HFROSC is running at its default setting
-    use_hfrosc(4, 16);
-  }
-
-  // Set PLL Source to be HFXOSC if available.
-  uint32_t config_value = 0;
-
-  config_value |= PLL_REFSEL(refsel);
-
-  if (bypass) {
-    // Bypass
-    config_value |= PLL_BYPASS(1);
-
-    PRCI_REG(PRCI_PLLCFG) = config_value;
-
-    // If we don't have an HFXTAL, this doesn't really matter.
-    // Set our Final output divide to divide-by-1:
-    PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
-  } else {
-    // In case we are executing from QSPI,
-    // (which is quite likely) we need to
-    // set the QSPI clock divider appropriately
-    // before boosting the clock frequency.
-
-    // Div = f_sck/2
-    SPI0_REG(SPI_REG_SCKDIV) = 8;
-
-    // Set DIV Settings for PLL
-    // Both HFROSC and HFXOSC are modeled as ideal
-    // 16MHz sources (assuming dividers are set properly for
-    // HFROSC).
-    // (Legal values of f_REF are 6-48MHz)
-
-    // Set DIVR to divide-by-2 to get 8MHz frequency
-    // (legal values of f_R are 6-12 MHz)
-
-    config_value |= PLL_BYPASS(1);
-    config_value |= PLL_R(r);
-
-    // Set DIVF to get 512Mhz frequncy
-    // There is an implied multiply-by-2, 16Mhz.
-    // So need to write 32-1
-    // (legal values of f_F are 384-768 MHz)
-    config_value |= PLL_F(f);
-
-    // Set DIVQ to divide-by-2 to get 256 MHz frequency
-    // (legal values of f_Q are 50-400Mhz)
-    config_value |= PLL_Q(q);
-
-    // Set our Final output divide to divide-by-1:
-    PRCI_REG(PRCI_PLLDIV) = (PLL_FINAL_DIV_BY_1(1) | PLL_FINAL_DIV(0));
-
-    PRCI_REG(PRCI_PLLCFG) = config_value;
-
-    // Un-Bypass the PLL.
-    PRCI_REG(PRCI_PLLCFG) &= ~PLL_BYPASS(1);
-
-    // Wait for PLL Lock
-    // Note that the Lock signal can be glitchy.
-    // Need to wait 100 us
-    // RTC is running at 32kHz.
-    // So wait 4 ticks of RTC.
-    uint32_t now = mtime_lo();
-    while (mtime_lo() - now < 4) ;
-
-    // Now it is safe to check for PLL Lock
-    while ((PRCI_REG(PRCI_PLLCFG) & PLL_LOCK(1)) == 0) ;
-  }
-
-  // Switch over to PLL Clock source
-  PRCI_REG(PRCI_PLLCFG) |= PLL_SEL(1);
-}
-
-static void use_default_clocks()
-{
-  // Turn off the LFROSC
-  AON_REG(AON_LFROSC) &= ~ROSC_EN(1);
-
-  // Use HFROSC
-  use_hfrosc(4, 16);
-}
-
-static unsigned long __attribute__((noinline)) measure_cpu_freq(size_t n)
-{
-  unsigned long start_mtime, delta_mtime;
-  unsigned long mtime_freq = get_timer_freq();
-
-  // Don't start measuruing until we see an mtime tick
-  unsigned long tmp = mtime_lo();
-  do {
-    start_mtime = mtime_lo();
-  } while (start_mtime == tmp);
-
-  unsigned long start_mcycle = read_csr(mcycle);
-
-  do {
-    delta_mtime = mtime_lo() - start_mtime;
-  } while (delta_mtime < n);
-
-  unsigned long delta_mcycle = read_csr(mcycle) - start_mcycle;
-
-  return (delta_mcycle / delta_mtime) * mtime_freq
-         + ((delta_mcycle % delta_mtime) * mtime_freq) / delta_mtime;
-}
-
-unsigned long get_cpu_freq()
-{
-  static uint32_t cpu_freq;
-
-  if (!cpu_freq) {
-    // warm up I$
-    measure_cpu_freq(1);
-    // measure for real
-    cpu_freq = measure_cpu_freq(10);
-  }
-
-  return cpu_freq;
-}
-
-static void uart_init(size_t baud_rate)
-{
-  GPIO_REG(GPIO_IOF_SEL) &= ~IOF0_UART0_MASK;
-  GPIO_REG(GPIO_IOF_EN) |= IOF0_UART0_MASK;
-  UART0_REG(UART_REG_DIV) = get_cpu_freq() / baud_rate - 1;
-  UART0_REG(UART_REG_TXCTRL) |= UART_TXEN;
-}
-
-
-
-#ifdef USE_PLIC
-extern void handle_m_ext_interrupt();
-#endif
-
-#ifdef USE_M_TIME
-extern void handle_m_time_interrupt();
-#endif
-
-uintptr_t handle_trap(uintptr_t mcause, uintptr_t epc)
-{
-  if (0){
-#ifdef USE_PLIC
-    // External Machine-Level interrupt from PLIC
-  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_EXT)) {
-    handle_m_ext_interrupt();
-#endif
-#ifdef USE_M_TIME
-    // External Machine-Level interrupt from PLIC
-  } else if ((mcause & MCAUSE_INT) && ((mcause & MCAUSE_CAUSE) == IRQ_M_TIMER)){
-    handle_m_time_interrupt();
-#endif
-  }
-  else {
-    write(1, "trap\n", 5);
-    _exit(1 + mcause);
-  }
-  return epc;
-}
-
-void _init()
-{
-  
-  #ifndef NO_INIT
-  use_default_clocks();
-  use_pll(0, 0, 1, 31, 1);
-  uart_init(115200);
-
-  printf("core freq at %d Hz\n", get_cpu_freq());
-
-  write_csr(mtvec, &trap_entry);
-  if (read_csr(misa) & (1 << ('F' - 'A'))) { // if F extension is present
-    write_csr(mstatus, MSTATUS_FS); // allow FPU instructions without trapping
-    write_csr(fcsr, 0); // initialize rounding mode, undefined at reset
-  }
-  #endif
-  
-}
-
-void _fini()
-{
-}

hello-world/bsp/env/iss/openocd.cfg

@@ -1,34 +0,0 @@
-adapter_khz     10000
-
-interface ftdi
-ftdi_device_desc "Dual RS232-HS"
-ftdi_vid_pid 0x0403 0x6010
-
-ftdi_layout_init 0x0008 0x001b
-ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020
-
-#Reset Stretcher logic on FE310 is ~1 second long
-#This doesn't apply if you use
-# ftdi_set_signal, but still good to document
-#adapter_nsrst_delay 1500
-
-set _CHIPNAME riscv
-jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10e31913
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME riscv -chain-position $_TARGETNAME
-$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1
-
-flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME
-init
-#reset -- This type of reset is not implemented yet
-if {[ info exists pulse_srst]} {
-  ftdi_set_signal nSRST 0
-  ftdi_set_signal nSRST z
-  #Wait for the reset stretcher
-  #It will work without this, but
-  #will incur lots of delays for later commands.
-  sleep 1500
-}	
-halt
-#flash protect 0 64 last off

hello-world/bsp/env/iss/platform.h

@@ -1,133 +0,0 @@
-// See LICENSE for license details.
-
-#ifndef _SIFIVE_PLATFORM_H
-#define _SIFIVE_PLATFORM_H
-
-// Some things missing from the official encoding.h
-#define MCAUSE_INT         0x80000000
-#define MCAUSE_CAUSE       0x7FFFFFFF
-
-#include "sifive/const.h"
-#include "sifive/devices/aon.h"
-#include "sifive/devices/clint.h"
-#include "sifive/devices/gpio.h"
-#include "sifive/devices/otp.h"
-#include "sifive/devices/plic.h"
-#include "sifive/devices/prci.h"
-#include "sifive/devices/pwm.h"
-#include "sifive/devices/spi.h"
-#include "sifive/devices/uart.h"
-
-/****************************************************************************
- * Platform definitions
- *****************************************************************************/
-
-// Memory map
-#define MASKROM_BASE_ADDR _AC(0x00001000,UL)
-#define TRAPVEC_TABLE_BASE_ADDR _AC(0x00001010,UL)
-#define OTP_MMAP_ADDR _AC(0x00020000,UL)
-#define CLINT_BASE_ADDR _AC(0x02000000,UL)
-#define PLIC_BASE_ADDR _AC(0x0C000000,UL)
-#define AON_BASE_ADDR _AC(0x10000000,UL)
-#define PRCI_BASE_ADDR _AC(0x10008000,UL)
-#define OTP_BASE_ADDR _AC(0x10010000,UL)
-#define GPIO_BASE_ADDR _AC(0x10012000,UL)
-#define UART0_BASE_ADDR _AC(0x10013000,UL)
-#define SPI0_BASE_ADDR _AC(0x10014000,UL)
-#define PWM0_BASE_ADDR _AC(0x10015000,UL)
-#define UART1_BASE_ADDR _AC(0x10023000,UL)
-#define SPI1_BASE_ADDR _AC(0x10024000,UL)
-#define PWM1_BASE_ADDR _AC(0x10025000,UL)
-#define SPI2_BASE_ADDR _AC(0x10034000,UL)
-#define PWM2_BASE_ADDR _AC(0x10035000,UL)
-#define SPI0_MMAP_ADDR _AC(0x20000000,UL)
-#define MEM_BASE_ADDR _AC(0x80000000,UL)
-
-// IOF masks
-#define IOF0_SPI1_MASK          _AC(0x000007FC,UL)
-#define SPI11_NUM_SS     (4)
-#define IOF_SPI1_SS0          (2u)
-#define IOF_SPI1_SS1          (8u)
-#define IOF_SPI1_SS2          (9u)
-#define IOF_SPI1_SS3          (10u)
-#define IOF_SPI1_MOSI         (3u)
-#define IOF_SPI1_MISO         (4u)
-#define IOF_SPI1_SCK          (5u)
-#define IOF_SPI1_DQ0          (3u)
-#define IOF_SPI1_DQ1          (4u)
-#define IOF_SPI1_DQ2          (6u)
-#define IOF_SPI1_DQ3          (7u)
-
-#define IOF0_SPI2_MASK          _AC(0xFC000000,UL)
-#define SPI2_NUM_SS       (1)
-#define IOF_SPI2_SS0          (26u)
-#define IOF_SPI2_MOSI         (27u)
-#define IOF_SPI2_MISO         (28u)
-#define IOF_SPI2_SCK          (29u)
-#define IOF_SPI2_DQ0          (27u)
-#define IOF_SPI2_DQ1          (28u)
-#define IOF_SPI2_DQ2          (30u)
-#define IOF_SPI2_DQ3          (31u)
-
-//#define IOF0_I2C_MASK          _AC(0x00003000,UL)
-
-#define IOF0_UART0_MASK         _AC(0x00030000, UL)
-#define IOF_UART0_RX   (16u)
-#define IOF_UART0_TX   (17u)
-
-#define IOF0_UART1_MASK         _AC(0x03000000, UL)
-#define IOF_UART1_RX (24u)
-#define IOF_UART1_TX (25u)
-
-#define IOF1_PWM0_MASK          _AC(0x0000000F, UL)
-#define IOF1_PWM1_MASK          _AC(0x00780000, UL)
-#define IOF1_PWM2_MASK          _AC(0x00003C00, UL)
-
-// Interrupt numbers
-#define INT_RESERVED 0
-#define INT_WDOGCMP 1
-#define INT_RTCCMP 2
-#define INT_UART0_BASE 3
-#define INT_UART1_BASE 4
-#define INT_SPI0_BASE 5
-#define INT_SPI1_BASE 6
-#define INT_SPI2_BASE 7
-#define INT_GPIO_BASE 8
-#define INT_PWM0_BASE 40
-#define INT_PWM1_BASE 44
-#define INT_PWM2_BASE 48
-
-// Helper functions
-#define _REG32(p, i) (*(volatile uint32_t *) ((p) + (i)))
-#define _REG32P(p, i) ((volatile uint32_t *) ((p) + (i)))
-#define AON_REG(offset) _REG32(AON_BASE_ADDR, offset)
-#define CLINT_REG(offset) _REG32(CLINT_BASE_ADDR, offset)
-#define GPIO_REG(offset) _REG32(GPIO_BASE_ADDR, offset)
-#define OTP_REG(offset)  _REG32(OTP_BASE_ADDR, offset)
-#define PLIC_REG(offset) _REG32(PLIC_BASE_ADDR, offset)
-#define PRCI_REG(offset) _REG32(PRCI_BASE_ADDR, offset)
-#define PWM0_REG(offset) _REG32(PWM0_BASE_ADDR, offset)
-#define PWM1_REG(offset) _REG32(PWM1_BASE_ADDR, offset)
-#define PWM2_REG(offset) _REG32(PWM2_BASE_ADDR, offset)
-#define SPI0_REG(offset) _REG32(SPI0_BASE_ADDR, offset)
-#define SPI1_REG(offset) _REG32(SPI1_BASE_ADDR, offset)
-#define SPI2_REG(offset) _REG32(SPI2_BASE_ADDR, offset)
-#define UART0_REG(offset) _REG32(UART0_BASE_ADDR, offset)
-#define UART1_REG(offset) _REG32(UART1_BASE_ADDR, offset)
-
-// Misc
-
-#include <stdint.h>
-
-#define NUM_GPIO 32
-
-#define PLIC_NUM_INTERRUPTS 52
-#define PLIC_NUM_PRIORITIES 7
-
-#include "hifive1.h"
-
-unsigned long get_cpu_freq(void);
-unsigned long get_timer_freq(void);
-uint64_t get_timer_value(void);
-
-#endif /* _SIFIVE_PLATFORM_H */

hello-world/bsp/env/start.S

@@ -1,13 +1,27 @@
 // See LICENSE for license details.
+#include <sifive/smp.h>
+
+/* This is defined in sifive/platform.h, but that can't be included from
+ * assembly. */
+#define CLINT_CTRL_ADDR 0x02000000
 
 	.section .init
 	.globl _start
 	.type _start,@function
 
 _start:
-	la gp, _gp
+	.cfi_startproc
+	.cfi_undefined ra
+.option push
+.option norelax
+	la gp, __global_pointer$
+.option pop
 	la sp, _sp
 
+#if defined(ENABLE_SMP)
+	smp_pause(t0, t1)
+#endif
+
 	/* Load data section */
 	la a0, _data_lma
 	la a1, _data
@@ -47,8 +61,51 @@ _start:
 1:
 #endif
 
+#if defined(ENABLE_SMP)
+	smp_resume(t0, t1)
+
+	csrr a0, mhartid
+	bnez a0, 2f
+#endif
+
+	auipc ra, 0
+	addi sp, sp, -16
+#if __riscv_xlen == 32
+	sw ra, 8(sp)
+#else
+	sd ra, 8(sp)
+#endif
+
 	/* argc = argv = 0 */
 	li a0, 0
 	li a1, 0
 	call main
 	tail exit
+1:
+	j 1b
+
+#if defined(ENABLE_SMP)
+2:
+	la t0, trap_entry
+	csrw mtvec, t0
+
+	csrr a0, mhartid
+	la t1, _sp
+	slli t0, a0, 10
+	sub sp, t1, t0
+
+	auipc ra, 0
+	addi sp, sp, -16
+#if __riscv_xlen == 32
+	sw ra, 8(sp)
+#else
+	sd ra, 8(sp)
+#endif
+
+	call secondary_main
+	tail exit
+
+1:
+	j 1b
+#endif
+	.cfi_endproc

hello-world/bsp/env/ventry.S

@@ -0,0 +1,288 @@
+// See LICENSE for license details
+
+#ifndef VENTRY_S
+#define VENTRY_S
+
+#include "encoding.h"
+#include "sifive/bits.h"
+
+#only save caller registers
+.macro TRAP_ENTRY
+  addi sp, sp, -16*REGBYTES
+
+  STORE x1,  0*REGBYTES(sp)
+  STORE x5,  1*REGBYTES(sp)
+  STORE x6,  2*REGBYTES(sp)
+  STORE x7,  3*REGBYTES(sp)
+  STORE x10, 4*REGBYTES(sp)
+  STORE x11, 5*REGBYTES(sp)
+  STORE x12, 6*REGBYTES(sp)
+  STORE x13, 7*REGBYTES(sp)
+  STORE x14, 8*REGBYTES(sp)
+  STORE x15, 9*REGBYTES(sp)
+  STORE x16, 10*REGBYTES(sp)
+  STORE x17, 11*REGBYTES(sp)
+  STORE x28, 12*REGBYTES(sp)
+  STORE x29, 13*REGBYTES(sp)
+  STORE x30, 14*REGBYTES(sp)
+  STORE x31, 15*REGBYTES(sp)
+.endm
+
+#restore caller registers
+.macro TRAP_EXIT
+# Remain in M-mode after mret
+  li t0, MSTATUS_MPP
+  csrs mstatus, t0
+
+  LOAD x1,  0*REGBYTES(sp)
+  LOAD x5,  1*REGBYTES(sp)
+  LOAD x6,  2*REGBYTES(sp)
+  LOAD x7,  3*REGBYTES(sp)
+  LOAD x10, 4*REGBYTES(sp)
+  LOAD x11, 5*REGBYTES(sp)
+  LOAD x12, 6*REGBYTES(sp)
+  LOAD x13, 7*REGBYTES(sp)
+  LOAD x14, 8*REGBYTES(sp)
+  LOAD x15, 9*REGBYTES(sp)
+  LOAD x16, 10*REGBYTES(sp)
+  LOAD x17, 11*REGBYTES(sp)
+  LOAD x28, 12*REGBYTES(sp)
+  LOAD x29, 13*REGBYTES(sp)
+  LOAD x30, 14*REGBYTES(sp)
+  LOAD x31, 15*REGBYTES(sp)
+
+  addi sp, sp, 16*REGBYTES
+  mret
+.endm
+
+
+
+#Vector table for E31/E51
+
+  .section      .text.entry	
+  .align 8
+  .global vtrap_entry
+vtrap_entry:
+  j sync_trap
+  .align 2
+  j reserved
+  .align 2
+  j reserved
+  .align 2
+  j vmsi_Handler
+  .align 2
+  j reserved
+  .align 2
+  j reserved
+  .align 2
+  j reserved
+  .align 2
+  j vmti_Handler
+  .align 2
+  j reserved
+  .align 2
+  j reserved
+  .align 2
+  j reserved
+  .align 2
+  j vmei_Handler
+  .align 2
+  j reserved
+  .align 2
+  j reserved
+  .align 2
+  j reserved
+   .align 2
+  j reserved
+  .align 2
+  j vlip_Handler0
+  .align 2
+  j vlip_Handler1
+  .align 2
+  j vlip_Handler2
+  .align 2
+  j vlip_Handler3
+  .align 2
+  j vlip_Handler4
+  .align 2
+  j vlip_Handler5
+  .align 2
+  j vlip_Handler6
+  .align 2
+  j vlip_Handler7
+  .align 2
+  j vlip_Handler8
+  .align 2
+  j vlip_Handler9
+  .align 2
+  j vlip_Handler10
+  .align 2
+  j vlip_Handler11
+  .align 2
+  j vlip_Handler12
+  .align 2
+  j vlip_Handler13
+  .align 2
+  j vlip_Handler14
+  .align 2
+  j vlip_Handler15
+  
+#synchronous trap
+sync_trap:
+  TRAP_ENTRY
+  jal handle_sync_trap
+  TRAP_EXIT
+
+#Machine Software Interrupt
+vmsi_Handler:
+  TRAP_ENTRY
+  jal reserved
+  TRAP_EXIT
+
+#Machine Timer Interrupt
+vmti_Handler:
+  TRAP_ENTRY
+  jal handle_m_time_interrupt
+  TRAP_EXIT
+
+#Machine External Interrupt
+vmei_Handler:
+  TRAP_ENTRY
+  jal handle_m_external_interrupt
+  TRAP_EXIT
+
+#LIP0
+vlip_Handler0:
+  TRAP_ENTRY
+  jal handle_local_interrupt0
+  TRAP_EXIT
+
+#LIP1
+vlip_Handler1:
+  TRAP_ENTRY
+  jal handle_local_interrupt1
+  TRAP_EXIT
+
+#LIP2
+vlip_Handler2:
+  TRAP_ENTRY
+  jal handle_local_interrupt2
+  TRAP_EXIT
+
+#LIP3
+vlip_Handler3:
+  TRAP_ENTRY
+  jal handle_local_interrupt3
+  TRAP_EXIT
+
+#LIP4
+vlip_Handler4:
+  TRAP_ENTRY
+  jal handle_local_interrupt4
+  TRAP_EXIT
+
+#LIP5
+vlip_Handler5:
+  TRAP_ENTRY
+  jal handle_local_interrupt5
+  TRAP_EXIT
+
+#LIP6
+vlip_Handler6:
+  TRAP_ENTRY
+  jal handle_local_interrupt6
+  TRAP_EXIT
+
+#LIP7
+vlip_Handler7:
+  TRAP_ENTRY
+  jal handle_local_interrupt7
+  TRAP_EXIT
+
+#LIP8
+vlip_Handler8:
+  TRAP_ENTRY
+  jal handle_local_interrupt8
+  TRAP_EXIT
+
+#LIP9
+vlip_Handler9:
+  TRAP_ENTRY
+  jal handle_local_interrupt9
+  TRAP_EXIT
+
+#LIP10
+vlip_Handler10:
+  TRAP_ENTRY
+  jal handle_local_interrupt10
+  TRAP_EXIT
+
+#LIP11
+vlip_Handler11:
+  TRAP_ENTRY
+  jal handle_local_interrupt11
+  TRAP_EXIT
+
+#LIP12
+vlip_Handler12:
+  TRAP_ENTRY
+  jal handle_local_interrupt12
+  TRAP_EXIT
+
+#LIP13
+vlip_Handler13:
+  TRAP_ENTRY
+  jal handle_local_interrupt13
+  TRAP_EXIT
+
+#LIP14
+vlip_Handler14:
+  TRAP_ENTRY
+  jal handle_local_interrupt14
+  TRAP_EXIT
+
+#LIP15
+vlip_Handler15:
+  TRAP_ENTRY
+  jal handle_local_interrupt15
+  TRAP_EXIT
+
+#unimplemented ISRs trap here
+.weak reserved
+reserved:
+.weak handle_local_interrupt0
+handle_local_interrupt0:
+.weak handle_local_interrupt1
+handle_local_interrupt1:
+.weak handle_local_interrupt2
+handle_local_interrupt2:
+.weak handle_local_interrupt3
+handle_local_interrupt3:
+.weak handle_local_interrupt4
+handle_local_interrupt4:
+.weak handle_local_interrupt5
+handle_local_interrupt5:
+.weak handle_local_interrupt6
+handle_local_interrupt6:
+.weak handle_local_interrupt7
+handle_local_interrupt7:
+.weak handle_local_interrupt8
+handle_local_interrupt8:
+.weak handle_local_interrupt9
+handle_local_interrupt9:
+.weak handle_local_interrupt10
+handle_local_interrupt10:
+.weak handle_local_interrupt11
+handle_local_interrupt11:
+.weak handle_local_interrupt12
+handle_local_interrupt12:
+.weak handle_local_interrupt13
+handle_local_interrupt13:
+.weak handle_local_interrupt14
+handle_local_interrupt14:
+.weak handle_local_interrupt15
+handle_local_interrupt15:
+1:
+  j 1b
+	
+#endif

hello-world/bsp/include/sifive/bits.h

@@ -1,3 +1,4 @@
+// See LICENSE for license details.
 #ifndef _RISCV_BITS_H
 #define _RISCV_BITS_H
 
@@ -17,7 +18,7 @@
 #define STR(x) XSTR(x)
 #define XSTR(x) #x
 
-#ifdef __riscv64
+#if __riscv_xlen == 64
 # define SLL32    sllw
 # define STORE    sd
 # define LOAD     ld

hello-world/bsp/include/sifive/const.h

@@ -1,3 +1,4 @@
+// See LICENSE for license details.
 /* Derived from <linux/const.h> */
 
 #ifndef _SIFIVE_CONST_H

hello-world/bsp/include/sifive/devices/clic.h

@@ -0,0 +1,30 @@
+// See LICENSE for license details.
+
+#ifndef _SIFIVE_CLIC_H
+#define _SIFIVE_CLIC_H
+
+#define CLIC_HART0          0x00800000
+#define CLIC_MSIP           0x0000
+#define CLIC_MSIP_size      0x4
+#define CLIC_MTIMECMP       0x4000
+#define CLIC_MTIMECMP_size  0x8
+#define CLIC_MTIME          0xBFF8
+#define CLIC_MTIME_size     0x8
+
+#define CLIC_INTIP          0x000
+#define CLIC_INTIE          0x400
+#define CLIC_INTCFG         0x800
+#define CLIC_CFG            0xc00
+
+// These interrupt IDs are consistent across old and new mtvec modes
+#define SSIPID              1
+#define MSIPID              3
+#define STIPID              5
+#define MTIPID              7
+#define SEIPID              9
+#define MEIPID              11
+#define CSIPID              12
+#define LOCALINTIDBASE      16
+
+
+#endif /* _SIFIVE_CLIC_H */ 

hello-world/bsp/include/sifive/devices/spi.h

@@ -30,8 +30,8 @@
 
 /* Fields */
 
-#define SPI_SCK_POL             0x1
+#define SPI_SCK_PHA             0x1
-#define SPI_SCK_PHA             0x2
+#define SPI_SCK_POL             0x2
 
 #define SPI_FMT_PROTO(x)        ((x) & 0x3)
 #define SPI_FMT_ENDIAN(x)       (((x) & 0x1) << 2)

hello-world/bsp/include/sifive/sections.h

@@ -1,3 +1,4 @@
+// See LICENSE for license details.
 #ifndef _SECTIONS_H
 #define _SECTIONS_H
 

hello-world/bsp/include/sifive/smp.h

@@ -0,0 +1,65 @@
+#ifndef SIFIVE_SMP
+#define SIFIVE_SMP
+
+// The maximum number of HARTs this code supports
+#ifndef MAX_HARTS
+#define MAX_HARTS 32
+#endif
+#define CLINT_END_HART_IPI CLINT_CTRL_ADDR + (MAX_HARTS*4)
+
+// The hart that non-SMP tests should run on
+#ifndef NONSMP_HART
+#define NONSMP_HART 0
+#endif
+
+/* If your test cannot handle multiple-threads, use this: 
+ *   smp_disable(reg1)
+ */
+#define smp_disable(reg1, reg2)			 \
+  csrr reg1, mhartid				;\
+  li   reg2, NONSMP_HART			;\
+  beq  reg1, reg2, hart0_entry			;\
+42:						;\
+  wfi    					;\
+  j 42b						;\
+hart0_entry:
+
+/* If your test needs to temporarily block multiple-threads, do this:
+ *    smp_pause(reg1, reg2)
+ *    ... single-threaded work ...
+ *    smp_resume(reg1, reg2)
+ *    ... multi-threaded work ...
+ */
+
+#define smp_pause(reg1, reg2)	 \
+  li reg2, 0x8			;\
+  csrw mie, reg2		;\
+  csrr reg2, mhartid		;\
+  bnez reg2, 42f
+
+#define smp_resume(reg1, reg2)	 \
+  li reg1, CLINT_CTRL_ADDR	;\
+41:				;\
+  li reg2, 1			;\
+  sw reg2, 0(reg1)		;\
+  addi reg1, reg1, 4		;\
+  li reg2, CLINT_END_HART_IPI	;\
+  blt reg1, reg2, 41b		;\
+42:				;\
+  wfi    			;\
+  csrr reg2, mip		;\
+  andi reg2, reg2, 0x8		;\
+  beqz reg2, 42b		;\
+  li reg1, CLINT_CTRL_ADDR	;\
+  csrr reg2, mhartid		;\
+  slli reg2, reg2, 2		;\
+  add reg2, reg2, reg1		;\
+  sw zero, 0(reg2)		;\
+41:				;\
+  lw reg2, 0(reg1)		;\
+  bnez reg2, 41b		;\
+  addi reg1, reg1, 4		;\
+  li reg2, CLINT_END_HART_IPI	;\
+  blt reg1, reg2, 41b
+
+#endif

hello-world/bsp/libwrap/libwrap.mk

@@ -26,6 +26,7 @@ LIBWRAP_SRCS := \
 	sys/times.c \
 	sys/sbrk.c \
 	sys/_exit.c \
+	sys/puts.c \
 	misc/write_hex.c
 
 LIBWRAP_SRCS := $(foreach f,$(LIBWRAP_SRCS),$(LIBWRAP_DIR)/$(f))
@@ -34,13 +35,14 @@ LIBWRAP_OBJS := $(LIBWRAP_SRCS:.c=.o)
 LIBWRAP_SYMS := malloc free \
 	open lseek read write fstat stat close link unlink \
 	execve fork getpid kill wait \
-	isatty times sbrk _exit
+	isatty times sbrk _exit puts
 
 LIBWRAP := libwrap.a
 
 LINK_DEPS += $(LIBWRAP)
 
 LDFLAGS += $(foreach s,$(LIBWRAP_SYMS),-Wl,--wrap=$(s))
+LDFLAGS += $(foreach s,$(LIBWRAP_SYMS),-Wl,--wrap=_$(s))
 LDFLAGS += -L. -Wl,--start-group -lwrap -lc -Wl,--end-group
 
 CLEAN_OBJS += $(LIBWRAP_OBJS)

hello-world/bsp/libwrap/misc/write_hex.c

@@ -4,13 +4,13 @@
 #include <unistd.h>
 #include "platform.h"
 
-void write_hex(int fd, uint32_t hex)
+void write_hex(int fd, unsigned long int hex)
 {
   uint8_t ii;
   uint8_t jj;
   char towrite;
   write(fd , "0x", 2);
-  for (ii = 8 ; ii > 0; ii--) {
+  for (ii = sizeof(unsigned long int) * 2 ; ii > 0; ii--) {
     jj = ii - 1;
     uint8_t digit = ((hex & (0xF << (jj*4))) >> (jj*4));
     towrite = digit < 0xA ? ('0' + digit) : ('A' +  (digit - 0xA));

hello-world/bsp/libwrap/sys/_exit.c

@@ -2,12 +2,11 @@
 
 #include <unistd.h>
 #include "platform.h"
+#include "weak_under_alias.h"
 
-void __wrap__exit(int code)
+void __wrap_exit(int code)
 {
-//volatile uint32_t* leds = (uint32_t*) (GPIO_BASE_ADDR + GPIO_OUT_OFFSET);
   const char message[] = "\nProgam has exited with code:";
-//*leds = (~(code));
 
   write(STDERR_FILENO, message, sizeof(message) - 1);
   write_hex(STDERR_FILENO, code);
@@ -15,3 +14,4 @@ void __wrap__exit(int code)
 
   for (;;);
 }
+weak_under_alias(exit);

hello-world/bsp/libwrap/sys/close.c

@@ -2,8 +2,10 @@
 
 #include <errno.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 int __wrap_close(int fd)
 {
   return _stub(EBADF);
 }
+weak_under_alias(close);

hello-world/bsp/libwrap/sys/execve.c

@@ -2,8 +2,10 @@
 
 #include <errno.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 int __wrap_execve(const char* name, char* const argv[], char* const env[])
 {
   return _stub(ENOMEM);
 }
+weak_under_alias(execve);

hello-world/bsp/libwrap/sys/fstat.c

@@ -4,6 +4,7 @@
 #include <unistd.h>
 #include <sys/stat.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 int __wrap_fstat(int fd, struct stat* st)
 {
@@ -14,3 +15,4 @@ int __wrap_fstat(int fd, struct stat* st)
 
   return _stub(EBADF);
 }
+weak_under_alias(fstat);

hello-world/bsp/libwrap/sys/getpid.c

@@ -1,6 +1,8 @@
 /* See LICENSE of license details. */
+#include "weak_under_alias.h"
 
 int __wrap_getpid(void)
 {
   return 1;
 }
+weak_under_alias(getpid);

hello-world/bsp/libwrap/sys/isatty.c

@@ -1,6 +1,7 @@
 /* See LICENSE of license details. */
 
 #include <unistd.h>
+#include "weak_under_alias.h"
 
 int __wrap_isatty(int fd)
 {
@@ -9,3 +10,4 @@ int __wrap_isatty(int fd)
 
   return 0;
 }
+weak_under_alias(isatty);

hello-world/bsp/libwrap/sys/kill.c

@@ -2,8 +2,10 @@
 
 #include <errno.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 int __wrap_kill(int pid, int sig)
 {
   return _stub(EINVAL);
 }
+weak_under_alias(kill);

hello-world/bsp/libwrap/sys/link.c

@@ -2,8 +2,10 @@
 
 #include <errno.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 int __wrap_link(const char *old_name, const char *new_name)
 {
   return _stub(EMLINK);
 }
+weak_under_alias(link);

hello-world/bsp/libwrap/sys/lseek.c

@@ -4,6 +4,7 @@
 #include <unistd.h>
 #include <sys/types.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 off_t __wrap_lseek(int fd, off_t ptr, int dir)
 {
@@ -12,3 +13,4 @@ off_t __wrap_lseek(int fd, off_t ptr, int dir)
 
   return _stub(EBADF);
 }
+weak_under_alias(lseek);

hello-world/bsp/libwrap/sys/open.c

@@ -2,8 +2,10 @@
 
 #include <errno.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 int __wrap_open(const char* name, int flags, int mode)
 {
   return _stub(ENOENT);
 }
+weak_under_alias(open);

hello-world/bsp/libwrap/sys/openat.c

@@ -2,8 +2,10 @@
 
 #include <errno.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 int __wrap_openat(int dirfd, const char* name, int flags, int mode)
 {
   return _stub(ENOENT);
 }
+weak_under_alias(openat);

hello-world/bsp/libwrap/sys/puts.c

@@ -0,0 +1,28 @@
+/* See LICENSE of license details. */
+
+#include <stdint.h>
+#include <errno.h>
+#include <unistd.h>
+#include <sys/types.h>
+
+#include "platform.h"
+#include "stub.h"
+#include "weak_under_alias.h"
+
+int __wrap_puts(const char *s)
+{
+  while (*s != '\0') {
+    while (UART0_REG(UART_REG_TXFIFO) & 0x80000000) ;
+    UART0_REG(UART_REG_TXFIFO) = *s;
+
+    if (*s == '\n') {
+      while (UART0_REG(UART_REG_TXFIFO) & 0x80000000) ;
+      UART0_REG(UART_REG_TXFIFO) = '\r';
+    }
+
+    ++s;
+  }
+
+  return 0;
+}
+weak_under_alias(puts);

hello-world/bsp/libwrap/sys/read.c

@@ -7,12 +7,13 @@
 
 #include "platform.h"
 #include "stub.h"
+#include "weak_under_alias.h"
 
 ssize_t __wrap_read(int fd, void* ptr, size_t len)
 {
   uint8_t * current = (uint8_t *)ptr;
-  volatile uint32_t * uart_rx = (uint32_t *)(UART0_BASE_ADDR + UART_REG_RXFIFO);
+  volatile uint32_t * uart_rx = (uint32_t *)(UART0_CTRL_ADDR + UART_REG_RXFIFO);
-  volatile uint8_t * uart_rx_cnt = (uint8_t *)(UART0_BASE_ADDR + UART_REG_RXCTRL + 2);
+  volatile uint8_t * uart_rx_cnt = (uint8_t *)(UART0_CTRL_ADDR + UART_REG_RXCTRL + 2);
 
   ssize_t result = 0;
 
@@ -28,3 +29,4 @@ ssize_t __wrap_read(int fd, void* ptr, size_t len)
 
   return _stub(EBADF);
 }
+weak_under_alias(read);

hello-world/bsp/libwrap/sys/sbrk.c

@@ -1,6 +1,7 @@
 /* See LICENSE of license details. */
 
 #include <stddef.h>
+#include "weak_under_alias.h"
 
 void *__wrap_sbrk(ptrdiff_t incr)
 {
@@ -14,3 +15,4 @@ void *__wrap_sbrk(ptrdiff_t incr)
   curbrk += incr;
   return curbrk - incr;
 }
+weak_under_alias(sbrk);

hello-world/bsp/libwrap/sys/stat.c

@@ -3,8 +3,10 @@
 #include <errno.h>
 #include <sys/stat.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 int __wrap_stat(const char* file, struct stat* st)
 {
   return _stub(EACCES);
 }
+weak_under_alias(stat);

hello-world/bsp/libwrap/sys/times.c

@@ -3,8 +3,10 @@
 #include <errno.h>
 #include <sys/times.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 clock_t __wrap_times(struct tms* buf)
 {
   return _stub(EACCES);
 }
+weak_under_alias(times);

hello-world/bsp/libwrap/sys/unlink.c

@@ -2,8 +2,10 @@
 
 #include <errno.h>
 #include "stub.h"
+#include "weak_under_alias.h"
 
 int __wrap_unlink(const char* name)
 {
   return _stub(ENOENT);
 }
+weak_under_alias(unlink);

hello-world/bsp/libwrap/sys/weak_under_alias.h

@@ -0,0 +1,7 @@
+#ifndef _BSP_LIBWRAP_WEAK_UNDER_ALIAS_H
+#define _BSP_LIBWRAP_WEAK_UNDER_ALIAS_H
+
+#define weak_under_alias(name) \
+  extern __typeof (__wrap_##name) __wrap__##name __attribute__ ((weak, alias ("__wrap_"#name)))
+
+#endif

hello-world/bsp/libwrap/sys/write.c

@@ -7,6 +7,7 @@
 
 #include "platform.h"
 #include "stub.h"
+#include "weak_under_alias.h"
 
 ssize_t __wrap_write(int fd, const void* ptr, size_t len)
 {
@@ -27,3 +28,4 @@ ssize_t __wrap_write(int fd, const void* ptr, size_t len)
 
   return _stub(EBADF);
 }
+weak_under_alias(write);

hello-world/hello.c

@@ -17,16 +17,8 @@ int factorial(int i){
 
 int main()
 {
-	FILE * out = fdopen(STDOUT_FILENO, "w");
-	int value=0;
-	int res = read(STDIN_FILENO, &value, 1);
-//    FILE * inp = fdopen(STDIN_FILENO, "r");
-	//fprintf(out, "hello world!\n");
-//	int value = 0;
-//    int res = fscanf(inp, "%d", value);
-//	int res = scanf("%d", value);
 	volatile int result = factorial (10);
-	fprintf(out, "Factorial is %d\n", result);
+	printf("Factorial is %d\n", result);
 	printf("End of execution");
 	return 0;
 }