Add a simple singly linked list implementation when double linked list
are not needed. This allows to easily have statically defined linked
list that can be extended at runtime.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since event support will be checked in the next commits, return a value
from sse_event_get() to allow propagating it. This will be used to
report SBI_ERR_NOT_SUPPORTED when an event isn't supported.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We will add new functions to sbi_double_trap.c in order to register an
SSE event, split this to a header as part of preparation work.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
While sbi_pmu_irq_bit() was used to delegate irq to S-mode, LCOFIP usage
was still hardcoded in various places. This led to change the returned
value of sbi_pmu_irq_bit() to be a bit number rather than a bit mask
since it returns an 'int' and we need to obtain the bit number itself to
handle it in the IRQs handlers. Add a similar function to return the
irq mask which can also be used where the mask is required rather than
the bit itself.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Currently, the same irqchip instance is registered for multiple PLIC
and APLIC instances which causes the sbi_list_for_each_entry() loop
in the sbi_irqchip_init() to hang at boot-time.
To address the above issue, register a separate irqchip instance for
each PLIC and APLIC instance.
Fixes: 2dd6eaf680 ("lib: sbi_irqchip: Call driver warm_init from SBI core")
Reported-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Addition of "Experimental SBI Extensions" to the boot-time prints
disturbs the alignment of other prints so adjust all boot-time
prints accordingly.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
These drivers were merged on an experimental basis without the RPMI
specification being frozen. As a result, they may not be compatible with
the frozen version of the RPMI protocol. Additionally, their devicetree
bindings have not been reviewed and are subject to change. Warn the user
that these drivers make no compatibility guarantees, and that their
behavior and devicetree bindings may change incompatibly in future
versions of OpenSBI.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Initialize serial drivers first, so messages printed by other drivers do
not need to use the early console buffer.
Suggested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Improve 64-bit operation under rv32 and remove db_val_u32_hi
in rpmi_cppc_fc_db_trigger().
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The raw events have same event_idx. Thus, the event info sanity check
only relies on the select mask. The raw event check should be done first
so that regular hardware events can be verified using event idx range
check.
Fixes: e434584216 ("lib: sbi_pmu: Implement SBI PMU event info function")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The hardware event map function invoked from platform code should
exclude any raw events as there is a separate function for the raw
events.
Fixes: d8a483fc7f ("lib: sbi_pmu: PMU raw event v2 support")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The shell script makes multiple call-outs to awk to get information
from the configuration file. It would be easier to just write the
whole thing in one .awk script and have the makefile altered to call
that instead.
There should be no functional difference other than the script type
and has been tested with PLATFORM=generic build. This should be both
quicker and easier to understand.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
Send the errors to stderr, otherwise they end up being
written to the file the script was redirecting to in the
Makefile
Also, use EOF block to make it easier to redirect
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
If the script fails, we end up trying to build either
an empty or damaged .c file. Just remove it and let
gcc fail on non-existent file.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Anup Patel <anup@brainfault.org>
The specification states that a6 contains the current hart id and
a7 contains the entry argument. This was inverted in the current
implementation.
Reported-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Fix GLOBAL_PLAT_0_START/END definitions. The specification states that
the beginning of the range is 0xc000 and the end is 0xffff.
Reported-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Enabling V-extension using -march option causes OpenSBI boot-time
hang with LLVM compiler.
As a work-around, don't enable V-extension using -march option and
instead use a custom OpenSBI specific define inform availability of
V-extension to lib/sbi/sbi_trap_v_ldst.c.
Fixes: c2acc5e5b0 ("lib: sbi_misaligned_ldst: Add handling of vector load/store")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
The following error is observed when compiling fdt_cppc_rpmi
driver using LLVM:
lib/utils/cppc/fdt_cppc_rpmi.c:87:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
87 | u64 db_val_u64 = 0;
To fix the above issue, move the variable declaration at the
start of function.
Fixes: 591a98bdd5 ("lib: utils/cppc: Add RPMI CPPC driver")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Add misaligned load/store handling for the vector extension
to the sbi_misaligned_ldst library.
This implementation is inspired from the misaligned_vec_ldst
implementation in the riscv-pk project.
Co-developed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add a generic RPMI mailbox client driver which provides a MPXY channel.
Initially, this driver only supports RPMI clock service group but can
be extended to support multiple RPMI service groups.
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple MPXY drivers so add a simple
FDT based MPXY driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Implement the SBI MPXY extension which provides an SBI interface to
the supervisor software for send messages via MPXY framework.
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple CPPC drivers so add a simple
FDT based CPPC driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The RPMI HSM service group provides set of routine to query and control
power states of a Hart. Add RPMI based Hart State Management (HSM) driver.
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
It should possible to fixup FDT from any part of OpenSBI so add
fdt_register_general_fixup() which allows dynamic registration of
FDT fixup callbacks.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add RPMI based system suspend driver.
To test this, execute the follwoing in Linux:
$ echo mem > /sys/power/state
To wake up, execute the following command on qemu monitor terminal:
(qemu) system_wakeup
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The generic platform can have multiple system suspend drivers so add a
simple FDT based system suspend driver framework.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add RPMI based driver for system reset and enable it in the generic
platform defconfig
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The RISC-V Platform Management Interface (RPMI) defines a messaging protocol
and shared memory based transport for bi-directional communication with an
on-chip or external microcontroller.
To support RPMI in OpenSBI, add:
1) The RPMI messaging protocol defines and helper macros
2) A FDT mailbox driver for the RPMI shared memory transport
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Co-developed-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Signed-off-by: Subrahmanya Lingappa <slingappa@ventanamicro.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add a simple FDT based mailbox framework which is built on top of the generic
mailbox library. The phandle of FDT mailbox DT node is treated as the unique
mailbox controller ID which is required by the generic mailbox library. The
FDT based mailbox drivers will be probed on-demand from fdt_mailbox_request_chan()
called by the mailbox client drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Add generic mailbox library which is independent of hardware description
format. The OpenSBI platform support or mailbox drivers can register
mailbox controller instances which can be discovered and used by different
mailbox client drivers. Each mailbox controller instance has a unique ID
which can be used by mailbox client drivers for find the mailbox controller
instance. The mailbox client drivers will typically request a mailbox channel
from the mailbox controller and use it to do data transfer with the remote
end of mailbox channel.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
As more drivers adding memregions into root domain, the current static limit
of ROOT_REGION_MAX is not sufficient. Increase the limit to accomodate more
memregions.
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Allow the supervisor software to query about the event using the
new function. This supports both firmware and hardware events.
The hardware event presence is verified hw_event_map which is populated
via PMU device tree node. The firmware event presence is checked through
event validation function which should take care of both standard and
platform firmware events.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The SBI v3.0 introduced a new function to query about the events
without invoking CFG_MATCH. This allows supervisor software to
identify which events are supported on the platform with single
SBI call instead of a CFG_MATCH for each event.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The pmu_validate_event already has the same check for fw events.
The validate function is called prior to the current function
to find a counter for firmware. That's why, the redudant
check can be removed from the find counter function.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
As per the updated ISA specification and SBI PMU v3.0, lower 56
bits are available for the platform to implement mhpmeventX
encoding. Implement the PMU raw event V2 support defined in SBI
v3.0 which allows more bits for platforms to encode the raw events.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
grep -e "-mstrict-align\|-mno-unaligned-access" makes use of GNU grep's
backslash-escaped alternation operator \| which is available in basic
regular expression syntax (BRE) mode.
However, in POSIX grep's BRE mode | is an ordinary character which, when
backslash-escaped, matches itself. Therefore, the search pattern becomes
a plain string '-mstrict-align|-mno-unaligned-access' which obviously
never matches the expected error and CC_SUPPORT_STRICT_ALIGN is always set
to y.
When cross-compiling with LLVM on amd64-unknown-openbsd7.6 host for
riscv64-unknown-elf target this results in a compilation error:
clang: error: unsupported option '-mno-unaligned-access' for target
'riscv64-unknown-elf'
Using multiple -e options for this case maintains consistent behaviour
across different grep implementations and fixes the issue.
Signed-off-by: Igor Melnikov <imel@purelymail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The timer driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_timer_init() performs a
best-effort initialization of all matching DT nodes.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The serial driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_serial_init() first
attempts to match the chosen stdout device, and upon failure matches the
first available serial device in the DT. It is a fatal error if no such
device is found. This matches the behavior of fdt_driver_init_one().
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The reset driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. The generic fdt_reset_init() performs a
best-effort initialization of all matching DT nodes. Platform-specific
logic expects exactly one DT node to match a single driver. This is
accomplished by using fdt_driver_init_one() with a local list containing
that one driver.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The regmap driver subsystem does not need any extra data, so it can use
`struct fdt_driver` directly. It always initializes the driver for a
specific DT node.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
