The fdt_parse_aclint_node() is used to parse DT node for SiFive
CLINT, ACLINT MTIMER, and ACLINT MSWI devices.
The ACLINT MTIMER has undergone following changes:
1) MTIMER DT node now requires separate addresses in for MTIME
register and MTIMECMPx registers in the reg DT property.
2) MTIMER DT node might have no interrupts-extended DT property
when the MTIMER device has no associated HARTs (i.e. the
MTIMER device has no MTIMECMPx registers)
This patch extends fdt_parse_aclint_node() to handle above
mentioned changes in ACLINT MTIMER DT bindings.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add "index" parameter to fdt_get_node_addr_size() API so that
calling function can specify index of desired register set. This
will allow fdt_get_node_addr_size() to handle DT nodes with
multiple register sets.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The maximum address and size encoded in DT are 64-bit numbers, so we
should use uint64_t for 'addr' and 'size' in fdt_get_node_addr_size().
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
The libfdt project does not have a generic API to parse phandle
with args from a DT node so we add fdt_parse_phandle_with_args()
for this purpose. This new API will be useful to FDT based drivers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_aclint_node() which can parse both ACLINT and
CLINT DT nodes. This means fdt_parse_clint_node() is not required
anymore so we remove it as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
This patch adds support for the UART used by the NOEL-V processor.
Cobham Gaisler's NOEL-V RISC-V processor IP is available under GPL
and commercial license and is described in more detail at
https://www.gaisler.com/noelv.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
C-Class is a member of the SHAKTI family of processors from Indian
Institute of Technology - Madras(IIT-M).
It is an extremely configurable and commercial-grade 5-stage in-order
core supporting the standard RV64GCSUN ISA extensions.
https://gitlab.com/shaktiproject/cores/c-class/blob/master/README.md
We add OpenSBI support for Shakti C-class SoC.
Signed-off-by: Vijai Kumar K <vijai@behindbytes.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
We add fdt_parse_clint_node() function which will be used by
fdt_ipi_clint and fdt_timer_clint drivers to parse CLINT details
from DT node.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend fdt_find_match() implementation by adding node offset
parameter which represents the first node to match from.
The improved fdt_find_match() can be used to find multiple
match nodes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We extend all PLIC functions to have a "struct plic_data *"
parameter pointing to PLIC details. This allows platforms to
use these functions for multiple PLIC instances.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_plic_node() function which will allow us to parse
a particular DT node as PLIC node. This will be useful in parsing
the DT node which we have found by matching compatible string.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_max_hart_id() API which return max HART id based
on CPU DT nodes. This will be used by generic FDT based drivers in
subsequent patches.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Parsing HART id from a CPU DT node is a common requirement for
RISC-V systems. The newly added fdt_parse_hart_id() also helps
reduce duplicate code between fdt_cpu_fixup() function and
fdt_parse_hart_count() function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
We add fdt_parse_sifive_uart_node() function which will allow
us to parse a particular DT node as SiFive UART node. This will
be useful in parsing the node pointed by stdout-path.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_get_node_addr_size() will be useful in FDT based simple
driver frameworks so we make it a public function.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
This patch adds FDT match table based node lookup funcitons.
These functions will be useful in implementing simple FDT
based driver frameworks.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The fdt_parse_clint() is quite generic and can be used for other
types of devices so we rename it to fdt_parse_compat_addr().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
We add fdt_parse_uart8250_node() function which will allow us
to parse a particular DT node as UART 8250 node. This will be
useful in parsing the node pointed by stdout-path.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
The information parsed by fdt_parse_uart8250() API is not complete.
We need to parse reg-shift and reg-io-width for UART 8520 as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
FDT helper file contain both fdt fixup and parsing functions.
Split the fixup related functions to a separate file for a better code
organization.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Different DT based platforms from the sam family may reuse IP blocks with
different configurations. These different configurations can be obtained
by parsing the device tree.
Add a FDT parser framework that can parse various device configurations from
device tree. Currently, the parsing algorithms doesn't cover all the use cases
or possible combination of DT configurations. It will be improved over time.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
This adds a general device tree fix-up helper to do all required
device tree fix-ups for a typical platform.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Add a helper routine to updates the "status" property of a CPU node
in the device tree to "disabled" if that hart is in disabled state.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Now that we have a dedicated fdt_helper.c file for DT releated
helper routines, move plic_fdt_fixup() codes from plic.c to
fdt_helper.c and rename it to fdt_plic_fixup() at the same time,
to keep name consistency in the same file.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Add a helper routine to insert a child node of the reserved memory
node in the device tree that describes the protected memory region
done by OpenSBI via PMP.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
