Bring back FW_TEXT_START as an optional parameter to allow users
explicitly specify compile time address for loading debug symbols.
When not specified, the FW_TEXT_START is assumed to be 0.
Fixes: d4d2582eef ("firmware: remove FW_TEXT_START")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Tested-by: Clément Léger <cleger@rivosinc.com>
Now opensbi can run at any address via dynamic relocation. We can
remove FW_TEXT_START.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
As the the "Console Putchar" extension is already legacy and may
be removed in the furture. So replace it with the SBI v2.0 "DBCN"
extension.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
It can be useful to make SBI v0.2 or newer ecalls from this payload
for testing purposes. To support this, convert the macros to use the
extension/function parameter convention.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
When OpenSBI is compiled as fPIE mode, the assembler will translate "la"
to GOT reference pattern. It will cause to cost an additional load
instruction when obtaining the symbol address. However, if the symbol
locates within the positive or negative 2GB region, we can use "lla"
instead of "la" to avoid unneeded GOT references. This patch assumes that
the OpenSBI image excluding the payload does not exceed 2GB. Based on
this assumption, all "la" instructions are replaced by "lla" to avoid
performance degradation when compiling as fPIE mode.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Move the .align directives after switching the section. We want to align
the start of the current section, not the end of the previous section.
This also obsoletes the misguided workaround of disabling relaxation.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Current SBI implementation is now considered as version 0.1 and will be
removed/replaced with newer extension/functions in future.
Rename the existing implementations accordingly to be in sync with the
specification.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Test payload uses an SBI call and uses the macros defined in interface
header which is not the correct place to have these definitions.
The interface header file should be used to keep SBI specification
related macros.
Keep all the test payload related code in test itself.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Noisy commit, no functional changes.
Generated with an current upstream clang-format and:
clang-format -i $(find . -name \*.[ch])
Signed-off-by: Olof Johansson <olof@lixom.net>
Some older toolchains may not have all the csr's defined. Update all
the csr functions to use the CSR_ #define values instead of the
toolchain defined values.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
This patch updates copyright header in all files as follows:
1. Makes "SPDX-License-Identifier: BSD-2-Clause" as first line
2. Change copyright year to 2019 for Western Digital
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Define sbi_ecall_console_puts() using sbi_ecall_console_putchar()
renamed as sbi_ecall_console_putc() and remove the hardcoded version
of the same funtion in the test payload code.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
The firmware payload offset defined by FW_PAYLOAD_OFFSET must
specify a value large enough so the the payload does not overlap
with the base firmware data, bss and text. For platforms without
any strong requirement on the payload address, introduce the
FW_PAYLOAD_ALIGN build parameter to automatically place the payload
right after the base firmware at an address aligned with the defined
value.
Either FW_PAYLOAD_OFFSET or FW_PAYLOAD_ALIGN should be defined by a
platform configuration. If both FW_PAYLOAD_OFFSET and FW_PAYLOAD_ALIGN
are defined by a platform, FW_PAYLOAD_OFFSET has precedence and is
used for building the final firmawre image.
Using FW_PAYLOAD_ALIGN=4096 with the Kendryte platform rather than
the abitrary FW_PAYLOAD_OFFSET=0x10000 value reduces the final
firmware image size by about 20KB.
Add a description of the FW_PAYLOAD_ALIGN configuration parameter in the
fw_payload documentation file as well. And while at it, also fix
various grammar and style issues in that file..
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Currently, the default payload for FW_PAYLOAD is embedded
fw_payload.S itself. This means people have to hack fw_payload.S
if they want to have some temporary S-mode test code.
This patch adds a separate dummy payload for FW_PAYLOAD which
can be easily hacked for some S-mode testing.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
