This patch updates OpenSBI version to 1.4 as part of
release preparation.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The parser will fail if the timer is clint timer and has regname
property. As the regname is only meaningful for aclint, it is more
robust to only check regname for aclint timer.
Fixes: 6112d58 ("lib: utils/fdt: Allow to use reg-names when parsing ACLINT")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The SBI_ETRAP error code was introduced only for doing trap
redirection in generic sbi_ecall_handler(). Now the trap
redirection is moved into sbi_ecall_legacy.c and SBI_ETRAP
error code is only used in this source file so let us remove
it.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Some of the upcoming SBI extensions (such as SSE) will directly
update register state so improve the prototype of ecall handler
to accommodate this. Further, this flexibility allows us to
push the trap redirection from sbi_ecall_handler() to the
sbi_ecall_legacy_handler().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
On platforms with Smepmp, the MMIO regions accessed by M-mode need
to be explicitly marked with M-mode only read/write or shared (both
(M-mode and S-mode) read/write permission.
If the above is not done then runtime PLIC access from M-mode on
platforms with Smepmp will result in access fault when further
results in CPU hotplug not working.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us reduce the size of struct sbi_tlb_info by doing the
following:
1) Change the data type of asid and vmid fields to uint16_t
2) Replace local_fn() function pointer with an enum
Based on the above, the size of struct sbi_tlb_info is reduced
by 16 bytes on RV64 and 4 bytes on RV32.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Enable access to some extensions through menvcfg and show them in "Boot
HART ISA Extensions" if they are present in the device tree.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Define an array sbi_hart_ext to map extension ID and name , and use it
for ISA parsing and printing out the supported extensions.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Currently, the fdt_parse_aclint_node() follows a fixed order to parse
ACLINT timer. This may cause the undesirable result when the ACLINT
device does not support mtime without adding an empty entry for it in
the DT.
To be robust, make fdt_parse_aclint_node() support "reg-names" property,
so it can parse the DT in an order independent way. For compatibility,
fdt_parse_aclint_node() only use "reg-names" when parsing ACLINT timer,
and will fallback to the old way if "reg-names" property is not found.
Link: https://lore.kernel.org/all/20231114-skedaddle-precinct-66c8897227bb@squawk/
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup patel <anup@brainfault.org>
Previous patch introduced a change that using hart count as the default
number of tlb entries in the fifo. This makes the default tlb fifo size
grow in square with the number of harts. So the default heap size is
not enough to allocate tlb fifo when the hart count is big.
Fixes: 52fd64b ("platform: Uses hart count as the default size of tlb info")
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The counter info should only return valid hardware counters for the ones
set in the counter mask. Otherwise, it will report incorrect number of
hardware counters to the supervisor if the platform has discontiguous
counters.
Fixes: c744ed77b1 ("lib: sbi_pmu: Enable noncontigous hpm event and counters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
OpenSBI doesn't support SBI PMU snapshot yet as there is not much benefit
unless the multiple counters overflow at the same time.
Just add the definition and return not supported error at this moment. The
default returned error is also not supported. Thus, no functional change
intended.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
The original code returns the value of the word before modification.
When modifying the upper 32 bits under RV64, the value returned via
int return will have no meaning. Corrected to return the value of the
bit. And modify the function description.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
To allow platform override pmu_init() filling the translation table
fdt_pmu_evt_select[] when PMU node doesn't provide such information,
we need to share the table and its entry counter with other .c file.
We also define the structures of PMU property in fdt_helper.h, so we
can initialize the mappings in arrays.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Add support for custom PMU extensions to set inhibit bits
on custom CSRs by introducing the PMU device callback
hw_counter_filter_mode(). This allows the perf tool to
restrict event counting under a specified privileged
mode by appending a modifier, e.g. perf record -e event:k
to count events only happening in kernel mode.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The old scheme doesn't allow sending hart0 self-IPI as the
corresponding bit on pending register is hardwired to 0, this
could lead to unhandle IPIs on SMP systems, esp. on single-core.
Furthermore, the limitation of old scheme is 8-core, instead of
reserving source hart information, we assign bit (x + 1) as the
enable and pending bit of hartx, this also expands the bootable
hart number.
The following diagram shows the enable bits of the new scheme
on 32-core Andes platform.
Pending regs: 0x1000 x---0---0---0---0------0---0
Pending hart ID: 0 1 2 3 ... 30 31
Interrupt ID: 0 1 2 3 4 ... 31 32
| | | | | | |
Enable regs: 0x2000 x---1---0---0---0-...--0---0---> hart0
| | | | | | |
0x2080 x---0---1---0---0-...--0---0---> hart1
| | | | | | |
0x2100 x---0---0---1---0-...--0---0---> hart2
| | | | | | |
0x2180 x---0---0---0---1-...--0---0---> hart3
. . . . . . .
. . . . . . .
. . . . . . .
0x2f00 x---0---0---0---0-...--1---0---> hart30
| | | | | | |
0x2f80 x---0---0---0---0-...--0---1---> hart31
<-------- word 0 -------><--- word 1 --->
To send IPI to hart0, for example, another hart (including hart0
itself) will set bit 1 of first word on the pending register.
We also fix indentation in andes_plicsw.h along with this patch.
Fixes: ce7c490719 ("lib: utils/ipi: Add Andes fdt ipi driver support")
Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Randolph <randolph@andestech.com>
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005665.html
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
In the future there may be a lot of ISA extensions, a 'long' may not
be able to accommodate, changed to an array for the future.
Addresses-Coverity-ID: 1568357 Out-of-bounds access
Fixes: 6259b2ec2d ("lib: utils/fdt: Fix fdt_parse_isa_extensions()
implementation")
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
- Add Zkr as extension in sbi_hart_extensions enum
- Return "zkr" string for Zkr extension from sbi_hart_extension_id2string
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Define macros to access the sseed and the useed bit in the machine
security configuration register (mseccfg).
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For platform with high number of harts, it is better to auto detect a
suitable number of entries in tlb fifo. Since allocating tlb entry for
all online harts can reduce the wait time significantly, using the
number of the online harts can make most platforms happy. This auto
detection can avoid most duplicate code for setting tlb fifo size.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Now that SBI v2.0 specification is frozen, we change spec version
implemented by OpenSBI to v2.0.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
RISC-V privileged specification v1.12 introduced the mconfigptr CSR
which will hold the physical address of a configuration data
structure.
Signed-off-by: Yangjie Zhang <jay1273062855@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Since everything is statically linked, we won't actually have
R_RISCV_{32,64} relocations. No need to handle these.
Fixes: 0f20e8adcf ("firmware: Support position independent execution")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The macros to test permissions must perform an exact match of all the
bits in the input with the desired permission bits. Otherwise, the check
returns false positives in those cases where only some of the desired
permissions are set in the input.
Fixes: 6c202c5 ("include: sbi: Add Smepmp specific access flags for PMP
entries")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_hartmask_for_each_hart() macro is slow and has only one user
so let us completely remove the sbi_hartmask_for_each_hart() macro.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us maximize the use of HART index in sbi_domain because hartindex
based hartmask access and sbi_scratch lookup is faster.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The sbi_scratch_last_hartid() macro is not of much use on platforms
with really sparse hartids so let us replace use of this macro with
other approaches.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Let us prefer hartindex over hartid in IPI framework which in-turn
forces IPI users to also prefer hartindex.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Currently, the sbi_hartmask is indexed by hartid which puts a
limit on hartid to be less than SBI_HARTMASK_MAX_BITS.
We extend the sbi_hartmask implementation to use hartindex and
support updating sbi_hartmask using hartid. This removes the
limit on hartid and existing code works largely unmodified.
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
The hartid to hartindex mapping is now tracked in sbi_scratch so we
don't need sbi_platform_hart_index() and sbi_platform_hart_invalid()
functions hence let us remove them.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We introduce HART index and related helper functions in sbi_scratch
where HART index is contiguous and each HART index maps to a physical
HART id such that 0 <= HART index and HART index < SBI_HARTMASK_MAX_BITS.
The HART index to HART id mapping follows the index2id mapping provided
by the platform. If the platform does not provide index2id mapping then
identity mapping is assumed.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We found the mstatus.FS status is not set correctly after the SET_F64_REG()
and SET_F32_REG(). We should set mstatus.FS dirty after we emulate the FPU
instructions.
Co-developed-by: Roy Lin <roy.lin@sifive.com>
Signed-off-by: Roy Lin <roy.lin@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
For some platforms with a particularly high number of harts, if the
tlb fifo is too small, it case harts to wait. Platforms should be
allowed to specify the size of the tlb fifo.
Signed-off-by: Xiang W <wxjstz@126.com>
Signed-off-by: Xing Xiaoguang <xiaoguang.xing@sophgo.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The previous definition had the assumption that the machine word length
is equal to the word length of LONG. Remove this assumption and add a
static check to prevent errors in subsequent modifications.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
After supporting noncontigous hpm event and counters in opensbi, the
number of hpm counters can be calculated by the mhpm_mask. So this field
is unnecessary and can be removed to save some space.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
This adds the support for ISA extension smcntrpmf. When some inhibit flags
are set by a lower privilege mode for new CSRs added by smcntrpmf, OpenSBI
sets the appropriate values correspondingly.
Signed-off-by: Kaiwen Xue <kaiwenx@andrew.cmu.edu>
Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Platforms may implement hpm events/counters non contiguously but the current
implementation assumes them to be always contigous. Add a bitmap that
captures the hpm events/counters as implemented in the hardware and use
it to set the max limit of hardware counters visible to the OS. Counters
not implemented in the hardware can't be used by the OS because those
wont be described in the DT.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The functionality of SiFive Test reset driver is easily available
through Syscon reset driver so let us remove the SiFive Test driver.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
We add a simple FDT based regmap framework which is built on top of
generic regmap library. The phandle of FDT regmap DT node is treated
as unique regmap ID. The FDT based regmap drivers will be probed
on-demand from fdt_regmap_get_by_phandle() and fdt_regmap_get()
called by the regmap client drivers.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
We add generic regmap access library which is independent of
hardware description format (FDT or ACPI). The OpenSBI platform
support or regmap drivers can register regmap instances which
can be discovered by different regmap clients based on the
unique ID of regmap instances.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
The "driver" pointer in struct i2c_adapter is not used anywhere
so let us remove it.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Because the CSR names in the spec are mseccfg and mseccfgh. Remove
CSR_MSECCFG_LOWER and CSR_MSECCFG_UPPER and directly define
CSR_MSECCFG and CSR_MSECCFGH.
Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
When Smepmp is enabled, M-mode will need to map/unmap the
shared memory before it can read/write to it. This patch
adds functions to create dynamic short-lived mappings.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
- If Smepmp is enabled, the access flags of an entry are determined based on
truth table defined in Smepmp.
- First PMP entry (index 0) is reserved.
- Existing boot PMP entries start from index 1.
- Since enabling Smepmp revokes the access privileges of the M-mode software
on S/U-mode region, first PMP entry is used to map/unmap the shared memory
between M and S/U-mode. This allows a temporary access window for the M-mode
software to read/write to S/U-mode memory region.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
- Add function to parse ISA string in FDT.
- Set Smepmp feature bit in extensions if "smepmp" string is found in ISA string.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Smepmp specification defines a truth table based on which the access is allowed to
different modes. This patch adds different flags based on this truth table.
Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
