Add parent_unique_id fields to struct aplic_data for
IMSIC parent linking in MSI mode. Store parent IMSIC unique_id
during FDT parsing of the APLIC node.
Add aplic_is_msi_mode() complementing aplic_is_direct_mode() to
consolidate delivery mode detection. Add APLIC_TARGET_EIID() macro
for packing the EIID field into the TARGET register.
Add parent_unique_id and parent_irq_map fields to struct aplic_data.
parent_unique_id identifies the upstream IMSIC irqchip device resolved
via sbi_irqchip_find_device() during hwirq_setup. parent_irq_map is
a per-source array allocated at cold init time to track the EIID
assigned by the IMSIC for each APLIC source.
Restore aplic_writel_msicfg() and re-introduce MSI address register
programming in aplic_init(), gated on aplic_is_msi_mode(). Set the
DOMAINCFG_DM bit to switch the hardware to MSI delivery mode when
no IDC structures are present.
Add aplic_program_msi_target() to pack hart_index, guest_index, and
EIID into the APLIC_TARGET register. Add aplic_write_msi() as the
sbi_irqchip write_msi callback that extracts EIID and hart_index from
the MSI message and calls aplic_program_msi_target(). Add
aplic_msi_callback() as the MSI receive callback that dispatches to
sbi_irqchip_process_hwirq() on the APLIC chip.
Extend aplic_hwirq_setup() with an MSI path that resolves the parent
IMSIC chip by parent_unique_id, registers an MSI route via
sbi_irqchip_register_msi(), and stores the allocated EIID in
parent_irq_map for the source being configured.
Extend aplic_hwirq_set_affinity() with an MSI path that delegates
affinity reprogramming to the parent IMSIC chip via
sbi_irqchip_set_affinity() using the stored parent_irq_map entry.
Guard warm_init, process_hwirqs, and hwirq_eoi with early returns in
MSI mode as interrupt delivery and acknowledgement are handled by the
IMSIC in that configuration.
Signed-off-by: Oza Pawandeep <pawandeep.oza@oss.qualcomm.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260721214833.687361-3-pawandeep.oza@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add inline register accessors (aplic_sourcecfg_write/read,
aplic_target_write, aplic_irq_setie/clrie/clrip, aplic_idc_base/
read/write) to consolidate all MMIO access behind typed helpers
and eliminate open-coded address arithmetic throughout the driver.
Add field-packing macros APLIC_TARGET_HART_IDX, APLIC_TARGET_IPRIO,
and APLIC_TARGET_GUEST_IDX for constructing
APLIC_TARGET register values.
Add aplic_is_direct_mode() mode helper, aplic_hwirq_flags_to_sourcecfg()
to map generic hwirq flags to APLIC source modes, aplic_hwirq_is_delegated()
to detect S-mode delegated sources, aplic_find_idc_index() to map a
hart index to its IDC slot, and aplic_first_target_hart() to select
the first available IDC hart for initial interrupt targeting.
Implement the full sbi_irqchip callback set for direct (IDC) mode:
- warm_init: enables IDC interrupt delivery and threshold per hart
- process_hwirqs: reads TOPI and dispatches via sbi_irqchip_process_hwirq,
skipping delegated sources
- hwirq_setup: programs sourcecfg from hwirq_flags and sets the TARGET
register to the first available IDC hart
- hwirq_cleanup: clears IE, IP, sourcecfg, and TARGET on teardown
- hwirq_eoi: reads CLAIMI to acknowledge the interrupt on the IDC
- hwirq_set_affinity: reprograms TARGET to the specified hart index
- hwirq_mask/unmask: clears/sets IE via CLRIENUM/SETIENUM
Register the irqchip device and populate target_harts from idc_map
only when targets_mmode is set in aplic_cold_irqchip_init().
Co-developed-by: Raymond Mao <raymond.mao@riscstar.com>
Signed-off-by Raymond Mao <raymond.mao@riscstar.com>
Signed-off-by: Oza Pawandeep <pawandeep.oza@oss.qualcomm.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260721214833.687361-2-pawandeep.oza@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
It is possible to have platform where an irqchip device targets
a subset of harts and there are multiple irqchip devices to cover
all harts.
To support this scenario:
1) Add target_harts hartmask to struct sbi_irqchip_device which
represents the set of harts targetted by the irqchip device
2) Call warm_init() and process_hwirqs() callbacks of an irqchip
device on a hart only if irqchip device targets that particular
hart
Signed-off-by: Anup Patel <anup.patel@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260213055342.3124872-6-anup.patel@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The section 4.5.4 "Supervisor MSI address configuration (smsiaddrcfg
and smsiaddrcfgh)" of the AIA specification states that:
"If register mmsiaddrcfgh of the domain has bit L set to one, then
smsiaddrcfg and smsiaddrcfgh are locked as read-only alongside
mmsiaddrcfg and mmsiaddrcfgh."
In other words, the L bit is not defined for smsiaddrcfg[h] registers
so fix aplic_writel_msicfg() accordingly.
Signed-off-by: Yang Jialong <z_bajeer@yeah.net>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250806032924.3532975-1-z_bajeer@yeah.net
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the same irqchip instance is registered for multiple PLIC
and APLIC instances which causes the sbi_list_for_each_entry() loop
in the sbi_irqchip_init() to hang at boot-time.
To address the above issue, register a separate irqchip instance for
each PLIC and APLIC instance.
Fixes: 2dd6eaf680 ("lib: sbi_irqchip: Call driver warm_init from SBI core")
Reported-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Have the SBI irqchip core keep track of registered irqchip devices. This
is useful for any callbacks the irqchip driver may have, such as for
warm initialization, the external interrupt handler function, and any
future support for handling external interrupts (beyond IPIs) in M-mode.
This improves on the tracking done in fdt_irqchip.c, as it tracks device
instances, not just drivers, so callbacks can target a specific device.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update APLIC driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Each APLIC CLRIE register allows disabling 32 interrupt sources at
a time by writing -1 so no need to write CLRIE register separately
for each interrupt source.
Fixes: 99792653de ("lib: utils/irqchip: Add APLIC initialization library")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple APLIC initialization library which is independent of
hardware description format (FDT or ACPI). This APLIC initialization
library can be used by custom OpenSBI platform support to setup
APLIC domains.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
