Add inline register accessors (aplic_sourcecfg_write/read,
aplic_target_write, aplic_irq_setie/clrie/clrip, aplic_idc_base/
read/write) to consolidate all MMIO access behind typed helpers
and eliminate open-coded address arithmetic throughout the driver.
Add field-packing macros APLIC_TARGET_HART_IDX, APLIC_TARGET_IPRIO,
and APLIC_TARGET_GUEST_IDX for constructing
APLIC_TARGET register values.
Add aplic_is_direct_mode() mode helper, aplic_hwirq_flags_to_sourcecfg()
to map generic hwirq flags to APLIC source modes, aplic_hwirq_is_delegated()
to detect S-mode delegated sources, aplic_find_idc_index() to map a
hart index to its IDC slot, and aplic_first_target_hart() to select
the first available IDC hart for initial interrupt targeting.
Implement the full sbi_irqchip callback set for direct (IDC) mode:
- warm_init: enables IDC interrupt delivery and threshold per hart
- process_hwirqs: reads TOPI and dispatches via sbi_irqchip_process_hwirq,
skipping delegated sources
- hwirq_setup: programs sourcecfg from hwirq_flags and sets the TARGET
register to the first available IDC hart
- hwirq_cleanup: clears IE, IP, sourcecfg, and TARGET on teardown
- hwirq_eoi: reads CLAIMI to acknowledge the interrupt on the IDC
- hwirq_set_affinity: reprograms TARGET to the specified hart index
- hwirq_mask/unmask: clears/sets IE via CLRIENUM/SETIENUM
Register the irqchip device and populate target_harts from idc_map
only when targets_mmode is set in aplic_cold_irqchip_init().
Co-developed-by: Raymond Mao <raymond.mao@riscstar.com>
Signed-off-by Raymond Mao <raymond.mao@riscstar.com>
Signed-off-by: Oza Pawandeep <pawandeep.oza@oss.qualcomm.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260721214833.687361-2-pawandeep.oza@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
It is possible to have platform where an irqchip device targets
a subset of harts and there are multiple irqchip devices to cover
all harts.
To support this scenario:
1) Add target_harts hartmask to struct sbi_irqchip_device which
represents the set of harts targetted by the irqchip device
2) Call warm_init() and process_hwirqs() callbacks of an irqchip
device on a hart only if irqchip device targets that particular
hart
Signed-off-by: Anup Patel <anup.patel@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260213055342.3124872-6-anup.patel@oss.qualcomm.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The section 4.5.4 "Supervisor MSI address configuration (smsiaddrcfg
and smsiaddrcfgh)" of the AIA specification states that:
"If register mmsiaddrcfgh of the domain has bit L set to one, then
smsiaddrcfg and smsiaddrcfgh are locked as read-only alongside
mmsiaddrcfg and mmsiaddrcfgh."
In other words, the L bit is not defined for smsiaddrcfg[h] registers
so fix aplic_writel_msicfg() accordingly.
Signed-off-by: Yang Jialong <z_bajeer@yeah.net>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20250806032924.3532975-1-z_bajeer@yeah.net
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the same irqchip instance is registered for multiple PLIC
and APLIC instances which causes the sbi_list_for_each_entry() loop
in the sbi_irqchip_init() to hang at boot-time.
To address the above issue, register a separate irqchip instance for
each PLIC and APLIC instance.
Fixes: 2dd6eaf680 ("lib: sbi_irqchip: Call driver warm_init from SBI core")
Reported-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Have the SBI irqchip core keep track of registered irqchip devices. This
is useful for any callbacks the irqchip driver may have, such as for
warm initialization, the external interrupt handler function, and any
future support for handling external interrupts (beyond IPIs) in M-mode.
This improves on the tracking done in fdt_irqchip.c, as it tracks device
instances, not just drivers, so callbacks can target a specific device.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
The sbi_domain_root_add_memrange() should be preferred for creating
multiple memregions over a range. Update APLIC driver to use
sbi_domain_root_add_memrange() instead of explicitly registering
memregions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Each APLIC CLRIE register allows disabling 32 interrupt sources at
a time by writing -1 so no need to write CLRIE register separately
for each interrupt source.
Fixes: 99792653de ("lib: utils/irqchip: Add APLIC initialization library")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
We add simple APLIC initialization library which is independent of
hardware description format (FDT or ACPI). This APLIC initialization
library can be used by custom OpenSBI platform support to setup
APLIC domains.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
